summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/core.c102
-rw-r--r--drivers/usb/dwc3/core.h12
-rw-r--r--drivers/usb/dwc3/debugfs.c13
-rw-r--r--drivers/usb/dwc3/dwc3-keystone.c5
-rw-r--r--drivers/usb/dwc3/dwc3-of-simple.c9
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c12
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c2
-rw-r--r--drivers/usb/dwc3/ep0.c14
-rw-r--r--drivers/usb/dwc3/gadget.c117
9 files changed, 190 insertions, 96 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index de5e01f41bc2..34277ced26bd 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -67,23 +67,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
+ int retries = 1000;
int ret;
- /* Before Resetting PHY, put Core in Reset */
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- reg |= DWC3_GCTL_CORESOFTRESET;
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-
- /* Assert USB3 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
-
- /* Assert USB2 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
-
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
ret = phy_init(dwc->usb2_generic_phy);
@@ -95,26 +81,28 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
phy_exit(dwc->usb2_generic_phy);
return ret;
}
- mdelay(100);
- /* Clear USB3 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ /*
+ * We're resetting only the device side because, if we're in host mode,
+ * XHCI driver will reset the host block. If dwc3 was configured for
+ * host-only mode, then we can return early.
+ */
+ if (dwc->dr_mode == USB_DR_MODE_HOST)
+ return 0;
- /* Clear USB2 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg |= DWC3_DCTL_CSFTRST;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
- mdelay(100);
+ do {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (!(reg & DWC3_DCTL_CSFTRST))
+ return 0;
- /* After PHYs are stable we can take Core out of reset state */
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- reg &= ~DWC3_GCTL_CORESOFTRESET;
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+ udelay(1);
+ } while (--retries);
- return 0;
+ return -ETIMEDOUT;
}
/**
@@ -962,10 +950,6 @@ static int dwc3_probe(struct platform_device *pdev)
fladj = pdata->fladj_value;
}
- /* default to superspeed if no maximum_speed passed */
- if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
- dwc->maximum_speed = USB_SPEED_SUPER;
-
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1016,6 +1000,33 @@ static int dwc3_probe(struct platform_device *pdev)
goto err1;
}
+ /* Check the maximum_speed parameter */
+ switch (dwc->maximum_speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ break;
+ default:
+ dev_err(dev, "invalid maximum_speed parameter %d\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_UNKNOWN:
+ /* default to superspeed */
+ dwc->maximum_speed = USB_SPEED_SUPER;
+
+ /*
+ * default to superspeed plus if we are capable.
+ */
+ if (dwc3_is_usb31(dwc) &&
+ (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+ DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+
+ break;
+ }
+
/* Adjust Frame Length */
dwc3_frame_length_adjustment(dwc, fladj);
@@ -1139,6 +1150,11 @@ static int dwc3_suspend(struct device *dev)
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+ WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
+ WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
+
pinctrl_pm_select_sleep_state(dev);
return 0;
@@ -1152,11 +1168,21 @@ static int dwc3_resume(struct device *dev)
pinctrl_pm_select_default_state(dev);
+ usb_phy_set_suspend(dwc->usb2_phy, 0);
+ usb_phy_set_suspend(dwc->usb3_phy, 0);
+ ret = phy_power_on(dwc->usb2_generic_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_power_on(dwc->usb3_generic_phy);
+ if (ret < 0)
+ goto err_usb2phy_power;
+
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
ret = phy_init(dwc->usb2_generic_phy);
if (ret < 0)
- return ret;
+ goto err_usb3phy_power;
ret = phy_init(dwc->usb3_generic_phy);
if (ret < 0)
@@ -1189,6 +1215,12 @@ static int dwc3_resume(struct device *dev)
err_usb2phy_init:
phy_exit(dwc->usb2_generic_phy);
+err_usb3phy_power:
+ phy_power_off(dwc->usb3_generic_phy);
+
+err_usb2phy_power:
+ phy_power_off(dwc->usb2_generic_phy);
+
return ret;
}
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 29130682e547..6254b2ff9080 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -223,7 +223,8 @@
/* Global HWPARAMS3 Register */
#define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3)
#define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0
-#define DWC3_GHWPARAMS3_SSPHY_IFC_ENA 1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */
#define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2)
#define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0
#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1
@@ -249,6 +250,7 @@
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
#define DWC3_DCFG_SPEED_MASK (7 << 0)
+#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DCFG_SUPERSPEED (4 << 0)
#define DWC3_DCFG_HIGHSPEED (0 << 0)
#define DWC3_DCFG_FULLSPEED2 (1 << 0)
@@ -339,6 +341,7 @@
#define DWC3_DSTS_CONNECTSPD (7 << 0)
+#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DSTS_SUPERSPEED (4 << 0)
#define DWC3_DSTS_HIGHSPEED (0 << 0)
#define DWC3_DSTS_FULLSPEED2 (1 << 0)
@@ -856,7 +859,6 @@ struct dwc3 {
unsigned pullups_connected:1;
unsigned resize_fifos:1;
unsigned setup_packet_pending:1;
- unsigned start_config_issued:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
@@ -1025,6 +1027,12 @@ struct dwc3_gadget_ep_cmd_params {
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
+/* check whether we are on the DWC_usb31 core */
+static inline bool dwc3_is_usb31(struct dwc3 *dwc)
+{
+ return !!(dwc->revision & DWC3_REVISION_IS_DWC31);
+}
+
#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_host_init(struct dwc3 *dwc);
void dwc3_host_exit(struct dwc3 *dwc);
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 9ac37fe1b6a7..cebf9e38b60a 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -645,7 +645,7 @@ int dwc3_debugfs_init(struct dwc3 *dwc)
file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset);
if (!file) {
ret = -ENOMEM;
- goto err1;
+ goto err2;
}
if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) {
@@ -653,7 +653,7 @@ int dwc3_debugfs_init(struct dwc3 *dwc)
dwc, &dwc3_mode_fops);
if (!file) {
ret = -ENOMEM;
- goto err1;
+ goto err2;
}
}
@@ -663,19 +663,22 @@ int dwc3_debugfs_init(struct dwc3 *dwc)
dwc, &dwc3_testmode_fops);
if (!file) {
ret = -ENOMEM;
- goto err1;
+ goto err2;
}
file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
dwc, &dwc3_link_state_fops);
if (!file) {
ret = -ENOMEM;
- goto err1;
+ goto err2;
}
}
return 0;
+err2:
+ kfree(dwc->regset);
+
err1:
debugfs_remove_recursive(root);
@@ -686,5 +689,5 @@ err0:
void dwc3_debugfs_exit(struct dwc3 *dwc)
{
debugfs_remove_recursive(dwc->root);
- dwc->root = NULL;
+ kfree(dwc->regset);
}
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index 2be268d2423d..72664700b8a2 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -39,8 +39,6 @@
#define USBSS_IRQ_COREIRQ_EN BIT(0)
#define USBSS_IRQ_COREIRQ_CLR BIT(0)
-static u64 kdwc3_dma_mask;
-
struct dwc3_keystone {
struct device *dev;
struct clk *clk;
@@ -108,9 +106,6 @@ static int kdwc3_probe(struct platform_device *pdev)
if (IS_ERR(kdwc->usbss))
return PTR_ERR(kdwc->usbss);
- kdwc3_dma_mask = dma_get_mask(dev);
- dev->dma_mask = &kdwc3_dma_mask;
-
kdwc->clk = devm_clk_get(kdwc->dev, "usb");
error = clk_prepare_enable(kdwc->clk);
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 9c9f74155066..974335377d9f 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -42,6 +42,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ unsigned int count;
int ret;
int i;
@@ -49,11 +50,11 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
if (!simple)
return -ENOMEM;
- ret = of_clk_get_parent_count(np);
- if (ret < 0)
- return ret;
+ count = of_clk_get_parent_count(np);
+ if (!count)
+ return -ENOENT;
- simple->num_clocks = ret;
+ simple->num_clocks = count;
simple->clks = devm_kcalloc(dev, simple->num_clocks,
sizeof(struct clk *), GFP_KERNEL);
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 22e9606d8e08..55da2c7f727f 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -496,7 +496,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
dev_err(dev, "get_sync failed with err %d\n", ret);
- goto err0;
+ goto err1;
}
dwc3_omap_map_offset(omap);
@@ -516,28 +516,24 @@ static int dwc3_omap_probe(struct platform_device *pdev)
ret = dwc3_omap_extcon_register(omap);
if (ret < 0)
- goto err2;
+ goto err1;
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
- goto err3;
+ goto err2;
}
dwc3_omap_enable_irqs(omap);
return 0;
-err3:
+err2:
extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
-err2:
- dwc3_omap_disable_irqs(omap);
err1:
pm_runtime_put_sync(dev);
-
-err0:
pm_runtime_disable(dev);
return ret;
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 009d83048c8c..adc1e8a624cb 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -35,6 +35,7 @@
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
+#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
@@ -213,6 +214,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 3a9354abcb68..eca2e6d8e041 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -356,7 +356,8 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
*/
usb_status |= dwc->gadget.is_selfpowered;
- if (dwc->speed == DWC3_DSTS_SUPERSPEED) {
+ if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
+ (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (reg & DWC3_DCTL_INITU1ENA)
usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
@@ -426,7 +427,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
case USB_DEVICE_U1_ENABLE:
if (state != USB_STATE_CONFIGURED)
return -EINVAL;
- if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+ if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+ (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -440,7 +442,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
case USB_DEVICE_U2_ENABLE:
if (state != USB_STATE_CONFIGURED)
return -EINVAL;
- if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+ if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+ (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -555,7 +558,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
u32 reg;
- dwc->start_config_issued = false;
cfg = le16_to_cpu(ctrl->wValue);
switch (state) {
@@ -737,10 +739,6 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
break;
- case USB_REQ_SET_INTERFACE:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
- dwc->start_config_issued = false;
- /* Fall through */
default:
dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7d1dd82a95ac..8e4a1b195e9b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -385,24 +385,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
dep->trb_pool_dma = 0;
}
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep);
+
+/**
+ * dwc3_gadget_start_config - Configure EP resources
+ * @dwc: pointer to our controller context structure
+ * @dep: endpoint that is being enabled
+ *
+ * The assignment of transfer resources cannot perfectly follow the
+ * data book due to the fact that the controller driver does not have
+ * all knowledge of the configuration in advance. It is given this
+ * information piecemeal by the composite gadget framework after every
+ * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
+ * programming model in this scenario can cause errors. For two
+ * reasons:
+ *
+ * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
+ * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
+ * multiple interfaces.
+ *
+ * 2) The databook does not mention doing more DEPXFERCFG for new
+ * endpoint on alt setting (8.1.6).
+ *
+ * The following simplified method is used instead:
+ *
+ * All hardware endpoints can be assigned a transfer resource and this
+ * setting will stay persistent until either a core reset or
+ * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
+ * do DEPXFERCFG for every hardware endpoint as well. We are
+ * guaranteed that there are as many transfer resources as endpoints.
+ *
+ * This function is called for each endpoint when it is being enabled
+ * but is triggered only when called for EP0-out, which always happens
+ * first, and which should only happen in one of the above conditions.
+ */
static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
+ int i;
+ int ret;
+
+ if (dep->number)
+ return 0;
memset(&params, 0x00, sizeof(params));
+ cmd = DWC3_DEPCMD_DEPSTARTCFG;
- if (dep->number != 1) {
- cmd = DWC3_DEPCMD_DEPSTARTCFG;
- /* XferRscIdx == 0 for ep0 and 2 for the remaining */
- if (dep->number > 1) {
- if (dwc->start_config_issued)
- return 0;
- dwc->start_config_issued = true;
- cmd |= DWC3_DEPCMD_PARAM(2);
- }
+ ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
- return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (!dep)
+ continue;
+
+ ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+ if (ret)
+ return ret;
}
return 0;
@@ -421,7 +463,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
/* Burst size is only needed in SuperSpeed mode */
- if (dwc->gadget.speed == USB_SPEED_SUPER) {
+ if (dwc->gadget.speed >= USB_SPEED_SUPER) {
u32 burst = dep->endpoint.maxburst - 1;
params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
@@ -516,10 +558,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
struct dwc3_trb *trb_st_hw;
struct dwc3_trb *trb_link;
- ret = dwc3_gadget_set_xfer_resource(dwc, dep);
- if (ret)
- return ret;
-
dep->endpoint.desc = desc;
dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
@@ -530,7 +568,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
if (!usb_endpoint_xfer_isoc(desc))
- return 0;
+ goto out;
/* Link TRB for ISOC. The HWO bit is never reset */
trb_st_hw = &dep->trb_pool[0];
@@ -544,9 +582,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
}
+out:
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- strlcat(dep->name, "-control", sizeof(dep->name));
+ /* don't change name */
break;
case USB_ENDPOINT_XFER_ISOC:
strlcat(dep->name, "-isoc", sizeof(dep->name));
@@ -1403,7 +1442,8 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
- if (speed == DWC3_DSTS_SUPERSPEED) {
+ if ((speed == DWC3_DSTS_SUPERSPEED) ||
+ (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
ret = -EINVAL;
goto out;
@@ -1628,16 +1668,20 @@ static int dwc3_gadget_start(struct usb_gadget *g,
case USB_SPEED_HIGH:
reg |= DWC3_DSTS_HIGHSPEED;
break;
- case USB_SPEED_SUPER: /* FALLTHROUGH */
- case USB_SPEED_UNKNOWN: /* FALTHROUGH */
+ case USB_SPEED_SUPER_PLUS:
+ reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+ break;
default:
- reg |= DWC3_DSTS_SUPERSPEED;
+ dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_SUPER:
+ reg |= DWC3_DCFG_SUPERSPEED;
+ break;
}
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
- dwc->start_config_issued = false;
-
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
@@ -2237,7 +2281,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
dwc3_disconnect_gadget(dwc);
- dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
@@ -2288,7 +2331,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_stop_active_transfers(dwc);
dwc3_clear_stall_all_ep(dwc);
- dwc->start_config_issued = false;
/* Reset device address to zero */
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
@@ -2306,7 +2348,8 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
* this. Maybe it becomes part of the power saving plan.
*/
- if (speed != DWC3_DSTS_SUPERSPEED)
+ if ((speed != DWC3_DSTS_SUPERSPEED) &&
+ (speed != DWC3_DSTS_SUPERSPEED_PLUS))
return;
/*
@@ -2335,6 +2378,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_update_ram_clk_sel(dwc, speed);
switch (speed) {
+ case DWC3_DCFG_SUPERSPEED_PLUS:
+ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+ dwc->gadget.ep0->maxpacket = 512;
+ dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+ break;
case DWC3_DCFG_SUPERSPEED:
/*
* WORKAROUND: DWC3 revisions <1.90a have an issue which
@@ -2376,8 +2424,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
/* Enable USB2 LPM Capability */
- if ((dwc->revision > DWC3_REVISION_194A)
- && (speed != DWC3_DCFG_SUPERSPEED)) {
+ if ((dwc->revision > DWC3_REVISION_194A) &&
+ (speed != DWC3_DCFG_SUPERSPEED) &&
+ (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg |= DWC3_DCFG_LPM_CAP;
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
@@ -2439,7 +2488,11 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
* implemented.
*/
- dwc->gadget_driver->resume(&dwc->gadget);
+ if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+ spin_unlock(&dwc->lock);
+ dwc->gadget_driver->resume(&dwc->gadget);
+ spin_lock(&dwc->lock);
+ }
}
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
@@ -2883,6 +2936,9 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
int dwc3_gadget_suspend(struct dwc3 *dwc)
{
+ if (!dwc->gadget_driver)
+ return 0;
+
if (dwc->pullups_connected) {
dwc3_gadget_disable_irq(dwc);
dwc3_gadget_run_stop(dwc, true, true);
@@ -2901,6 +2957,9 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
struct dwc3_ep *dep;
int ret;
+ if (!dwc->gadget_driver)
+ return 0;
+
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-14 05:36:22 +0000