diff options
Diffstat (limited to 'drivers/usb')
268 files changed, 9671 insertions, 5494 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 2f1e2aa42b44..d8926c6cd2a8 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -5,6 +5,7 @@ # Object files in subdirectories obj-$(CONFIG_USB) += core/ +obj-$(CONFIG_USB_SUPPORT) += phy/ obj-$(CONFIG_USB_DWC3) += dwc3/ obj-$(CONFIG_USB_DWC2) += dwc2/ @@ -48,7 +49,6 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB_SUPPORT) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 0dc8c06a7b5f..0270d1312f83 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -255,7 +255,8 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, usb_dbg(usbatm, "%s entered\n", __func__); - if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) { + buffer = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!buffer) { ret = -ENOMEM; usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__); goto out; @@ -638,7 +639,8 @@ static void speedtch_handle_int(struct urb *int_urb) goto fail; } - if ((int_urb = instance->int_urb)) { + int_urb = instance->int_urb; + if (int_urb) { ret = usb_submit_urb(int_urb, GFP_ATOMIC); schedule_work(&instance->status_check_work); if (ret < 0) { @@ -650,7 +652,8 @@ static void speedtch_handle_int(struct urb *int_urb) return; fail: - if ((int_urb = instance->int_urb)) + int_urb = instance->int_urb; + if (int_urb) mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY)); } @@ -759,11 +762,13 @@ static void speedtch_release_interfaces(struct usb_device *usb_dev, struct usb_interface *cur_intf; int i; - for (i = 0; i < num_interfaces; i++) - if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) { + for (i = 0; i < num_interfaces; i++) { + cur_intf = usb_ifnum_to_if(usb_dev, i); + if (cur_intf) { usb_set_intfdata(cur_intf, NULL); usb_driver_release_interface(&speedtch_usb_driver, cur_intf); } + } } static int speedtch_bind(struct usbatm_data *usbatm, @@ -787,7 +792,8 @@ static int speedtch_bind(struct usbatm_data *usbatm, return -ENODEV; } - if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) { + data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA); + if (!data_intf) { usb_err(usbatm, "%s: data interface not found!\n", __func__); return -ENODEV; } diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 5a459377574b..a2ae88dbda78 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -952,7 +952,7 @@ static void uea_load_page_e1(struct work_struct *work) int i; /* reload firmware when reboot start and it's loaded already */ - if (ovl == 0 && pageno == 0 && sc->dsp_firm) { + if (ovl == 0 && pageno == 0) { release_firmware(sc->dsp_firm); sc->dsp_firm = NULL; } @@ -1074,7 +1074,7 @@ static void uea_load_page_e4(struct work_struct *work) uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno); /* reload firmware when reboot start and it's loaded already */ - if (pageno == 0 && sc->dsp_firm) { + if (pageno == 0) { release_firmware(sc->dsp_firm); sc->dsp_firm = NULL; } @@ -1599,7 +1599,7 @@ static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver) char file_arr[] = "CMVxy.bin"; char *file; - kparam_block_sysfs_write(cmv_file); + kernel_param_lock(THIS_MODULE); /* set proper name corresponding modem version and line type */ if (cmv_file[sc->modem_index] == NULL) { if (UEA_CHIP_VERSION(sc) == ADI930) @@ -1618,7 +1618,7 @@ static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver) strlcat(cmv_name, file, UEA_FW_NAME_MAX); if (ver == 2) strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX); - kparam_unblock_sysfs_write(cmv_file); + kernel_param_unlock(THIS_MODULE); } static int request_cmvs_old(struct uea_softc *sc, diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index dada0146cd7f..db322d9ccb6e 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -382,7 +382,8 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char "%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc); - if (!(skb = dev_alloc_skb(length))) { + skb = dev_alloc_skb(length); + if (!skb) { if (printk_ratelimit()) atm_err(instance, "%s: no memory for skb (length: %u)!\n", __func__, length); @@ -816,7 +817,8 @@ static int usbatm_atm_open(struct atm_vcc *vcc) goto fail; } - if (!(new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL))) { + new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL); + if (!new) { atm_err(instance, "%s: no memory for vcc_data!\n", __func__); ret = -ENOMEM; goto fail; diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c index b3b1bb78b2ef..a87597f88a84 100644 --- a/drivers/usb/atm/xusbatm.c +++ b/drivers/usb/atm/xusbatm.c @@ -73,7 +73,8 @@ static int xusbatm_capture_intf(struct usbatm_data *usbatm, struct usb_device *u usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, ifnum, ret); return ret; } - if ((ret = usb_set_interface(usb_dev, ifnum, altsetting))) { + ret = usb_set_interface(usb_dev, ifnum, altsetting); + if (ret) { usb_err(usbatm, "%s: altsetting %2d for interface %2d failed (%d)!\n", __func__, altsetting, ifnum, ret); return ret; } @@ -128,7 +129,8 @@ static int xusbatm_bind(struct usbatm_data *usbatm, rx_intf->altsetting->desc.bInterfaceNumber, tx_intf->altsetting->desc.bInterfaceNumber); - if ((ret = xusbatm_capture_intf(usbatm, usb_dev, rx_intf, rx_alt, rx_intf != intf))) + ret = xusbatm_capture_intf(usbatm, usb_dev, rx_intf, rx_alt, rx_intf != intf); + if (ret) return ret; if ((tx_intf != rx_intf) && (ret = xusbatm_capture_intf(usbatm, usb_dev, tx_intf, tx_alt, tx_intf != intf))) { diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c index 20ec4eee1ac8..c2d13968da82 100644 --- a/drivers/usb/c67x00/c67x00-hcd.c +++ b/drivers/usb/c67x00/c67x00-hcd.c @@ -34,7 +34,7 @@ static __u8 c67x00_hub_des[] = { 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + USB_DT_HUB, /* __u8 bDescriptorType; Hub-descriptor */ 0x02, /* __u8 bNbrPorts; */ 0x00, /* __u16 wHubCharacteristics; */ 0x00, /* (per-port OC, no power switching) */ diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 77b47d82c9a6..5ce3f1d6a6ed 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -10,6 +10,17 @@ config USB_CHIPIDEA if USB_CHIPIDEA +config USB_CHIPIDEA_OF + tristate + depends on OF + default USB_CHIPIDEA + +config USB_CHIPIDEA_PCI + tristate + depends on PCI + depends on NOP_USB_XCEIV + default USB_CHIPIDEA + config USB_CHIPIDEA_UDC bool "ChipIdea device controller" depends on USB_GADGET diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 1fc86a2ca22d..4decb12f2578 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -14,11 +14,6 @@ obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_usb2.o obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o -# PCI doesn't provide stubs, need to check -ifneq ($(CONFIG_PCI),) - obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_pci.o -endif +obj-$(CONFIG_USB_CHIPIDEA_PCI) += ci_hdrc_pci.o -ifneq ($(CONFIG_OF),) - obj-$(CONFIG_USB_CHIPIDEA) += usbmisc_imx.o ci_hdrc_imx.o -endif +obj-$(CONFIG_USB_CHIPIDEA_OF) += usbmisc_imx.o ci_hdrc_imx.o diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h index ca57e3dcd3d5..3cb9bda51ddf 100644 --- a/drivers/usb/chipidea/bits.h +++ b/drivers/usb/chipidea/bits.h @@ -15,6 +15,16 @@ #include <linux/usb/ehci_def.h> +/* + * ID + * For 1.x revision, bit24 - bit31 are reserved + * For 2.x revision, bit25 - bit28 are 0x2 + */ +#define TAG (0x1F << 16) +#define REVISION (0xF << 21) +#define VERSION (0xF << 25) +#define CIVERSION (0x7 << 29) + /* HCCPARAMS */ #define HCCPARAMS_LEN BIT(17) @@ -53,6 +63,7 @@ #define PORTSC_HSP BIT(9) #define PORTSC_PP BIT(12) #define PORTSC_PTC (0x0FUL << 16) +#define PORTSC_WKCN BIT(20) #define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23)) /* PTS and PTW for non lpm version only */ #define PORTSC_PFSC BIT(24) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 65913d48f0c8..6d6200e37b71 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -29,6 +29,15 @@ /****************************************************************************** * REGISTERS *****************************************************************************/ +/* Identification Registers */ +#define ID_ID 0x0 +#define ID_HWGENERAL 0x4 +#define ID_HWHOST 0x8 +#define ID_HWDEVICE 0xc +#define ID_HWTXBUF 0x10 +#define ID_HWRXBUF 0x14 +#define ID_SBUSCFG 0x90 + /* register indices */ enum ci_hw_regs { CAP_CAPLENGTH, @@ -97,6 +106,18 @@ enum ci_role { CI_ROLE_END, }; +enum ci_revision { + CI_REVISION_1X = 10, /* Revision 1.x */ + CI_REVISION_20 = 20, /* Revision 2.0 */ + CI_REVISION_21, /* Revision 2.1 */ + CI_REVISION_22, /* Revision 2.2 */ + CI_REVISION_23, /* Revision 2.3 */ + CI_REVISION_24, /* Revision 2.4 */ + CI_REVISION_25, /* Revision 2.5 */ + CI_REVISION_25_PLUS, /* Revision above than 2.5 */ + CI_REVISION_UNKNOWN = 99, /* Unknown Revision */ +}; + /** * struct ci_role_driver - host/gadget role driver * @start: start this role @@ -141,7 +162,10 @@ struct hw_bank { * @role: current role * @is_otg: if the device is otg-capable * @fsm: otg finite state machine - * @fsm_timer: pointer to timer list of otg fsm + * @otg_fsm_hrtimer: hrtimer for otg fsm timers + * @hr_timeouts: time out list for active otg fsm timers + * @enabled_otg_timer_bits: bits of enabled otg timers + * @next_otg_timer: next nearest enabled timer to be expired * @work: work for role changing * @wq: workqueue thread * @qh_pool: allocation pool for queue heads @@ -169,6 +193,10 @@ struct hw_bank { * @b_sess_valid_event: indicates there is a vbus event, and handled * at ci_otg_work * @imx28_write_fix: Freescale imx28 needs swp instruction for writing + * @supports_runtime_pm: if runtime pm is supported + * @in_lpm: if the core in low power mode + * @wakeup_int: if wakeup interrupt occur + * @rev: The revision number for controller */ struct ci_hdrc { struct device *dev; @@ -180,7 +208,10 @@ struct ci_hdrc { bool is_otg; struct usb_otg otg; struct otg_fsm fsm; - struct ci_otg_fsm_timer_list *fsm_timer; + struct hrtimer otg_fsm_hrtimer; + ktime_t hr_timeouts[NUM_OTG_FSM_TIMERS]; + unsigned enabled_otg_timer_bits; + enum otg_fsm_timer next_otg_timer; struct work_struct work; struct workqueue_struct *wq; @@ -211,6 +242,10 @@ struct ci_hdrc { bool id_event; bool b_sess_valid_event; bool imx28_write_fix; + bool supports_runtime_pm; + bool in_lpm; + bool wakeup_int; + enum ci_revision rev; }; static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) @@ -248,6 +283,36 @@ static inline void ci_role_stop(struct ci_hdrc *ci) } /** + * hw_read_id_reg: reads from a identification register + * @ci: the controller + * @offset: offset from the beginning of identification registers region + * @mask: bitfield mask + * + * This function returns register contents + */ +static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask) +{ + return ioread32(ci->hw_bank.abs + offset) & mask; +} + +/** + * hw_write_id_reg: writes to a identification register + * @ci: the controller + * @offset: offset from the beginning of identification registers region + * @mask: bitfield mask + * @data: new value + */ +static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset, + u32 mask, u32 data) +{ + if (~mask) + data = (ioread32(ci->hw_bank.abs + offset) & ~mask) + | (data & mask); + + iowrite32(data, ci->hw_bank.abs + offset); +} + +/** * hw_read: reads from a hw register * @ci: the controller * @reg: register index diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 0f05de7c6b6c..389f0e034259 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -23,22 +23,40 @@ #include "ci.h" #include "ci_hdrc_imx.h" -#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0) - struct ci_hdrc_imx_platform_flag { unsigned int flags; + bool runtime_pm; }; static const struct ci_hdrc_imx_platform_flag imx27_usb_data = { }; static const struct ci_hdrc_imx_platform_flag imx28_usb_data = { - .flags = CI_HDRC_IMX_IMX28_WRITE_FIX, + .flags = CI_HDRC_IMX28_WRITE_FIX | + CI_HDRC_TURN_VBUS_EARLY_ON, +}; + +static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_TURN_VBUS_EARLY_ON, +}; + +static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_TURN_VBUS_EARLY_ON, +}; + +static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_TURN_VBUS_EARLY_ON, }; static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible = "fsl,imx28-usb", .data = &imx28_usb_data}, { .compatible = "fsl,imx27-usb", .data = &imx27_usb_data}, + { .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data}, + { .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data}, + { .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids); @@ -48,6 +66,8 @@ struct ci_hdrc_imx_data { struct platform_device *ci_pdev; struct clk *clk; struct imx_usbmisc_data *usbmisc_data; + bool supports_runtime_pm; + bool in_lpm; }; /* Common functions shared by usbmisc drivers */ @@ -145,21 +165,18 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) } pdata.usb_phy = data->phy; - - if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX) - pdata.flags |= CI_HDRC_IMX28_WRITE_FIX; + pdata.flags |= imx_platform_flag->flags; + if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM) + data->supports_runtime_pm = true; ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) goto err_clk; - if (data->usbmisc_data) { - ret = imx_usbmisc_init(data->usbmisc_data); - if (ret) { - dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", - ret); - goto err_clk; - } + ret = imx_usbmisc_init(data->usbmisc_data); + if (ret) { + dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret); + goto err_clk; } data->ci_pdev = ci_hdrc_add_device(&pdev->dev, @@ -173,19 +190,20 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) goto err_clk; } - if (data->usbmisc_data) { - ret = imx_usbmisc_init_post(data->usbmisc_data); - if (ret) { - dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", - ret); - goto disable_device; - } + ret = imx_usbmisc_init_post(data->usbmisc_data); + if (ret) { + dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret); + goto disable_device; } platform_set_drvdata(pdev, data); - pm_runtime_no_callbacks(&pdev->dev); - pm_runtime_enable(&pdev->dev); + if (data->supports_runtime_pm) { + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + } + + device_set_wakeup_capable(&pdev->dev, true); return 0; @@ -200,14 +218,18 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) { struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev); - pm_runtime_disable(&pdev->dev); + if (data->supports_runtime_pm) { + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + } ci_hdrc_remove_device(data->ci_pdev); clk_disable_unprepare(data->clk); return 0; } -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM static int imx_controller_suspend(struct device *dev) { struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); @@ -215,6 +237,7 @@ static int imx_controller_suspend(struct device *dev) dev_dbg(dev, "at %s\n", __func__); clk_disable_unprepare(data->clk); + data->in_lpm = true; return 0; } @@ -222,25 +245,103 @@ static int imx_controller_suspend(struct device *dev) static int imx_controller_resume(struct device *dev) { struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; dev_dbg(dev, "at %s\n", __func__); - return clk_prepare_enable(data->clk); + if (!data->in_lpm) { + WARN_ON(1); + return 0; + } + + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; + + data->in_lpm = false; + + ret = imx_usbmisc_set_wakeup(data->usbmisc_data, false); + if (ret) { + dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret); + goto clk_disable; + } + + return 0; + +clk_disable: + clk_disable_unprepare(data->clk); + return ret; } +#ifdef CONFIG_PM_SLEEP static int ci_hdrc_imx_suspend(struct device *dev) { + int ret; + + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + + if (data->in_lpm) + /* The core's suspend doesn't run */ + return 0; + + if (device_may_wakeup(dev)) { + ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true); + if (ret) { + dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", + ret); + return ret; + } + } + return imx_controller_suspend(dev); } static int ci_hdrc_imx_resume(struct device *dev) { - return imx_controller_resume(dev); + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret; + + ret = imx_controller_resume(dev); + if (!ret && data->supports_runtime_pm) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + return ret; } #endif /* CONFIG_PM_SLEEP */ +static int ci_hdrc_imx_runtime_suspend(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret; + + if (data->in_lpm) { + WARN_ON(1); + return 0; + } + + ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true); + if (ret) { + dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret); + return ret; + } + + return imx_controller_suspend(dev); +} + +static int ci_hdrc_imx_runtime_resume(struct device *dev) +{ + return imx_controller_resume(dev); +} + +#endif /* CONFIG_PM */ + static const struct dev_pm_ops ci_hdrc_imx_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(ci_hdrc_imx_suspend, ci_hdrc_imx_resume) + SET_RUNTIME_PM_OPS(ci_hdrc_imx_runtime_suspend, + ci_hdrc_imx_runtime_resume, NULL) }; static struct platform_driver ci_hdrc_imx_driver = { .probe = ci_hdrc_imx_probe, diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 4ed828f75a1e..635717e9354a 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -22,5 +22,6 @@ struct imx_usbmisc_data { int imx_usbmisc_init(struct imx_usbmisc_data *); int imx_usbmisc_init_post(struct imx_usbmisc_data *); +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *, bool); #endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */ diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c index 4df669437211..773d150512fa 100644 --- a/drivers/usb/chipidea/ci_hdrc_pci.c +++ b/drivers/usb/chipidea/ci_hdrc_pci.c @@ -16,10 +16,16 @@ #include <linux/interrupt.h> #include <linux/usb/gadget.h> #include <linux/usb/chipidea.h> +#include <linux/usb/usb_phy_generic.h> /* driver name */ #define UDC_DRIVER_NAME "ci_hdrc_pci" +struct ci_hdrc_pci { + struct platform_device *ci; + struct platform_device *phy; +}; + /****************************************************************************** * PCI block *****************************************************************************/ @@ -52,7 +58,7 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct ci_hdrc_platform_data *platdata = (void *)id->driver_data; - struct platform_device *plat_ci; + struct ci_hdrc_pci *ci; struct resource res[3]; int retval = 0, nres = 2; @@ -61,6 +67,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, return -ENODEV; } + ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL); + if (!ci) + return -ENOMEM; + retval = pcim_enable_device(pdev); if (retval) return retval; @@ -73,6 +83,11 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_try_set_mwi(pdev); + /* register a nop PHY */ + ci->phy = usb_phy_generic_register(); + if (!ci->phy) + return -ENOMEM; + memset(res, 0, sizeof(res)); res[0].start = pci_resource_start(pdev, 0); res[0].end = pci_resource_end(pdev, 0); @@ -80,13 +95,14 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, res[1].start = pdev->irq; res[1].flags = IORESOURCE_IRQ; - plat_ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata); - if (IS_ERR(plat_ci)) { + ci->ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata); + if (IS_ERR(ci->ci)) { dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n"); - return PTR_ERR(plat_ci); + usb_phy_generic_unregister(ci->phy); + return PTR_ERR(ci->ci); } - pci_set_drvdata(pdev, plat_ci); + pci_set_drvdata(pdev, ci); return 0; } @@ -101,9 +117,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev, */ static void ci_hdrc_pci_remove(struct pci_dev *pdev) { - struct platform_device *plat_ci = pci_get_drvdata(pdev); + struct ci_hdrc_pci *ci = pci_get_drvdata(pdev); - ci_hdrc_remove_device(plat_ci); + ci_hdrc_remove_device(ci->ci); + usb_phy_generic_unregister(ci->phy); } /** diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c index 45844c951788..9eae1a16cef9 100644 --- a/drivers/usb/chipidea/ci_hdrc_usb2.c +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c @@ -25,7 +25,7 @@ struct ci_hdrc_usb2_priv { struct clk *clk; }; -static struct ci_hdrc_platform_data ci_default_pdata = { +static const struct ci_hdrc_platform_data ci_default_pdata = { .capoffset = DEF_CAPOFFSET, .flags = CI_HDRC_DISABLE_STREAMING, }; @@ -37,8 +37,10 @@ static int ci_hdrc_usb2_probe(struct platform_device *pdev) struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev); int ret; - if (!ci_pdata) - ci_pdata = &ci_default_pdata; + if (!ci_pdata) { + ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL); + *ci_pdata = ci_default_pdata; /* struct copy */ + } priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c index d976fc1db73a..1264de505527 100644 --- a/drivers/usb/chipidea/ci_hdrc_zevio.c +++ b/drivers/usb/chipidea/ci_hdrc_zevio.c @@ -18,7 +18,7 @@ static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = { .name = "ci_hdrc_zevio", - .flags = CI_HDRC_REGS_SHARED, + .flags = CI_HDRC_REGS_SHARED | CI_HDRC_FORCE_FULLSPEED, .capoffset = DEF_CAPOFFSET, }; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index a57dc8866fc5..3ad48e1c0c57 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -137,6 +137,22 @@ static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) return 0; } +static enum ci_revision ci_get_revision(struct ci_hdrc *ci) +{ + int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION); + enum ci_revision rev = CI_REVISION_UNKNOWN; + + if (ver == 0x2) { + rev = hw_read_id_reg(ci, ID_ID, REVISION) + >> __ffs(REVISION); + rev += CI_REVISION_20; + } else if (ver == 0x0) { + rev = CI_REVISION_1X; + } + + return rev; +} + /** * hw_read_intr_enable: returns interrupt enable register * @@ -251,8 +267,11 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) /* Clear all interrupts status bits*/ hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); - dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n", - ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); + ci->rev = ci_get_revision(ci); + + dev_dbg(ci->dev, + "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n", + ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); /* setup lock mode ? */ @@ -491,6 +510,13 @@ static irqreturn_t ci_irq(int irq, void *data) irqreturn_t ret = IRQ_NONE; u32 otgsc = 0; + if (ci->in_lpm) { + disable_irq_nosync(irq); + ci->wakeup_int = true; + pm_runtime_get(ci->dev); + return IRQ_HANDLED; + } + if (ci->is_otg) { otgsc = hw_read_otgsc(ci, ~0); if (ci_otg_is_fsm_mode(ci)) { @@ -642,8 +668,12 @@ static void ci_get_otg_capable(struct ci_hdrc *ci) ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC | DCCPARAMS_HC) == (DCCPARAMS_DC | DCCPARAMS_HC)); - if (ci->is_otg) + if (ci->is_otg) { dev_dbg(ci->dev, "It is OTG capable controller\n"); + /* Disable and clear all OTG irq */ + hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, + OTGSC_INT_STATUS_BITS); + } } static int ci_hdrc_probe(struct platform_device *pdev) @@ -673,6 +703,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & CI_HDRC_IMX28_WRITE_FIX); + ci->supports_runtime_pm = !!(ci->platdata->flags & + CI_HDRC_SUPPORTS_RUNTIME_PM); ret = hw_device_init(ci, base); if (ret < 0) { @@ -740,9 +772,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) } if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { - /* Disable and clear all OTG irq */ - hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, - OTGSC_INT_STATUS_BITS); ret = ci_hdrc_otg_init(ci); if (ret) { dev_err(dev, "init otg fails, ret = %d\n", ret); @@ -769,11 +798,11 @@ static int ci_hdrc_probe(struct platform_device *pdev) : CI_ROLE_GADGET; } - /* only update vbus status for peripheral */ - if (ci->role == CI_ROLE_GADGET) - ci_handle_vbus_change(ci); - if (!ci_otg_is_fsm_mode(ci)) { + /* only update vbus status for peripheral */ + if (ci->role == CI_ROLE_GADGET) + ci_handle_vbus_change(ci); + ret = ci_role_start(ci, ci->role); if (ret) { dev_err(dev, "can't start %s role\n", @@ -788,9 +817,19 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ret) goto stop; + if (ci->supports_runtime_pm) { + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); + pm_runtime_mark_last_busy(ci->dev); + pm_runtime_use_autosuspend(&pdev->dev); + } + if (ci_otg_is_fsm_mode(ci)) ci_hdrc_otg_fsm_start(ci); + device_set_wakeup_capable(&pdev->dev, true); + ret = dbg_create_files(ci); if (!ret) return 0; @@ -807,6 +846,12 @@ static int ci_hdrc_remove(struct platform_device *pdev) { struct ci_hdrc *ci = platform_get_drvdata(pdev); + if (ci->supports_runtime_pm) { + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + } + dbg_remove_files(ci); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); @@ -815,13 +860,41 @@ static int ci_hdrc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM +/* Prepare wakeup by SRP before suspend */ +static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci) +{ + if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && + !hw_read_otgsc(ci, OTGSC_ID)) { + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, + PORTSC_PP); + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN, + PORTSC_WKCN); + } +} + +/* Handle SRP when wakeup by data pulse */ +static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci) +{ + if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && + (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) { + if (!hw_read_otgsc(ci, OTGSC_ID)) { + ci->fsm.a_srp_det = 1; + ci->fsm.a_bus_drop = 0; + } else { + ci->fsm.id = 1; + } + ci_otg_queue_work(ci); + } +} + static void ci_controller_suspend(struct ci_hdrc *ci) { + disable_irq(ci->irq); ci_hdrc_enter_lpm(ci, true); - - if (ci->usb_phy) - usb_phy_set_suspend(ci->usb_phy, 1); + usb_phy_set_suspend(ci->usb_phy, 1); + ci->in_lpm = true; + enable_irq(ci->irq); } static int ci_controller_resume(struct device *dev) @@ -830,23 +903,59 @@ static int ci_controller_resume(struct device *dev) dev_dbg(dev, "at %s\n", __func__); - ci_hdrc_enter_lpm(ci, false); + if (!ci->in_lpm) { + WARN_ON(1); + return 0; + } + ci_hdrc_enter_lpm(ci, false); if (ci->usb_phy) { usb_phy_set_suspend(ci->usb_phy, 0); usb_phy_set_wakeup(ci->usb_phy, false); hw_wait_phy_stable(); } + ci->in_lpm = false; + if (ci->wakeup_int) { + ci->wakeup_int = false; + pm_runtime_mark_last_busy(ci->dev); + pm_runtime_put_autosuspend(ci->dev); + enable_irq(ci->irq); + if (ci_otg_is_fsm_mode(ci)) + ci_otg_fsm_wakeup_by_srp(ci); + } + return 0; } +#ifdef CONFIG_PM_SLEEP static int ci_suspend(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); if (ci->wq) flush_workqueue(ci->wq); + /* + * Controller needs to be active during suspend, otherwise the core + * may run resume when the parent is at suspend if other driver's + * suspend fails, it occurs before parent's suspend has not started, + * but the core suspend has finished. + */ + if (ci->in_lpm) + pm_runtime_resume(dev); + + if (ci->in_lpm) { + WARN_ON(1); + return 0; + } + + if (device_may_wakeup(dev)) { + if (ci_otg_is_fsm_mode(ci)) + ci_otg_fsm_suspend_for_srp(ci); + + usb_phy_set_wakeup(ci->usb_phy, true); + enable_irq_wake(ci->irq); + } ci_controller_suspend(ci); @@ -855,13 +964,57 @@ static int ci_suspend(struct device *dev) static int ci_resume(struct device *dev) { - return ci_controller_resume(dev); + struct ci_hdrc *ci = dev_get_drvdata(dev); + int ret; + + if (device_may_wakeup(dev)) + disable_irq_wake(ci->irq); + + ret = ci_controller_resume(dev); + if (ret) + return ret; + + if (ci->supports_runtime_pm) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + return ret; } #endif /* CONFIG_PM_SLEEP */ +static int ci_runtime_suspend(struct device *dev) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + + dev_dbg(dev, "at %s\n", __func__); + + if (ci->in_lpm) { + WARN_ON(1); + return 0; + } + + if (ci_otg_is_fsm_mode(ci)) + ci_otg_fsm_suspend_for_srp(ci); + + usb_phy_set_wakeup(ci->usb_phy, true); + ci_controller_suspend(ci); + + return 0; +} + +static int ci_runtime_resume(struct device *dev) +{ + return ci_controller_resume(dev); +} + +#endif /* CONFIG_PM */ static const struct dev_pm_ops ci_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume) + SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL) }; + static struct platform_driver ci_hdrc_driver = { .probe = ci_hdrc_probe, .remove = ci_hdrc_remove, @@ -871,7 +1024,18 @@ static struct platform_driver ci_hdrc_driver = { }, }; -module_platform_driver(ci_hdrc_driver); +static int __init ci_hdrc_platform_register(void) +{ + ci_hdrc_host_driver_init(); + return platform_driver_register(&ci_hdrc_driver); +} +module_init(ci_hdrc_platform_register); + +static void __exit ci_hdrc_platform_unregister(void) +{ + platform_driver_unregister(&ci_hdrc_driver); +} +module_exit(ci_hdrc_platform_unregister); MODULE_ALIAS("platform:ci_hdrc"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 268e4236e84c..5b7061a33103 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -88,9 +88,13 @@ static ssize_t ci_port_test_write(struct file *file, const char __user *ubuf, char buf[32]; int ret; - if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + count = min_t(size_t, sizeof(buf) - 1, count); + if (copy_from_user(buf, ubuf, count)) return -EFAULT; + /* sscanf requires a zero terminated string */ + buf[count] = '\0'; + if (sscanf(buf, "%u", &mode) != 1) return -EINVAL; @@ -336,8 +340,8 @@ static int ci_registers_show(struct seq_file *s, void *unused) struct ci_hdrc *ci = s->private; u32 tmp_reg; - if (!ci) - return 0; + if (!ci || ci->in_lpm) + return -EPERM; /* ------ Registers ----- */ tmp_reg = hw_read_intr_enable(ci); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 48731d0bab35..7161439def19 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -33,21 +33,23 @@ #include "host.h" static struct hc_driver __read_mostly ci_ehci_hc_driver; +static int (*orig_bus_suspend)(struct usb_hcd *hcd); struct ehci_ci_priv { struct regulator *reg_vbus; + struct ci_hdrc *ci; }; static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; + struct ci_hdrc *ci = priv->ci; struct device *dev = hcd->self.controller; - struct ci_hdrc *ci = dev_get_drvdata(dev); int ret = 0; int port = HCS_N_PORTS(ehci->hcs_params); - if (priv->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (priv->reg_vbus) { if (port > 1) { dev_warn(dev, "Not support multi-port regulator control\n"); @@ -64,6 +66,15 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) return ret; } } + + if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { + /* + * Marvell 28nm HSIC PHY requires forcing the port to HS mode. + * As HSIC is always HS, this should be safe for others. + */ + hw_port_test_set(ci, 5); + hw_port_test_set(ci, 0); + } return 0; }; @@ -112,13 +123,25 @@ static int host_start(struct ci_hdrc *ci) priv = (struct ehci_ci_priv *)ehci->priv; priv->reg_vbus = NULL; - - if (ci->platdata->reg_vbus) - priv->reg_vbus = ci->platdata->reg_vbus; + priv->ci = ci; + + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) { + ret = regulator_enable(ci->platdata->reg_vbus); + if (ret) { + dev_err(ci->dev, + "Failed to enable vbus regulator, ret=%d\n", + ret); + goto put_hcd; + } + } else { + priv->reg_vbus = ci->platdata->reg_vbus; + } + } ret = usb_add_hcd(hcd, 0, 0); if (ret) { - goto put_hcd; + goto disable_reg; } else { struct usb_otg *otg = &ci->otg; @@ -133,8 +156,15 @@ static int host_start(struct ci_hdrc *ci) if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) + hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); + return ret; +disable_reg: + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); put_hcd: usb_put_hcd(hcd); @@ -148,6 +178,9 @@ static void host_stop(struct ci_hdrc *ci) if (hcd) { usb_remove_hcd(hcd); usb_put_hcd(hcd); + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); } } @@ -158,6 +191,47 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci) host_stop(ci); } +static int ci_ehci_bus_suspend(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int port; + u32 tmp; + + int ret = orig_bus_suspend(hcd); + + if (ret) + return ret; + + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + u32 __iomem *reg = &ehci->regs->port_status[port]; + u32 portsc = ehci_readl(ehci, reg); + + if (portsc & PORT_CONNECT) { + /* + * For chipidea, the resume signal will be ended + * automatically, so for remote wakeup case, the + * usbcmd.rs may not be set before the resume has + * ended if other resume paths consumes too much + * time (~24ms), in that case, the SOF will not + * send out within 3ms after resume ends, then the + * high speed device will enter full speed mode. + */ + + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp |= CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + /* + * It needs a short delay between set RS bit and PHCD. + */ + usleep_range(150, 200); + break; + } + } + + return 0; +} + int ci_hdrc_host_init(struct ci_hdrc *ci) { struct ci_role_driver *rdrv; @@ -175,7 +249,12 @@ int ci_hdrc_host_init(struct ci_hdrc *ci) rdrv->name = "host"; ci->roles[CI_ROLE_HOST] = rdrv; - ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); - return 0; } + +void ci_hdrc_host_driver_init(void) +{ + ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); + orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; + ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; +} diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h index 5707bf379bfb..0f12f131bdd3 100644 --- a/drivers/usb/chipidea/host.h +++ b/drivers/usb/chipidea/host.h @@ -5,6 +5,7 @@ int ci_hdrc_host_init(struct ci_hdrc *ci); void ci_hdrc_host_destroy(struct ci_hdrc *ci); +void ci_hdrc_host_driver_init(void); #else @@ -18,6 +19,11 @@ static inline void ci_hdrc_host_destroy(struct ci_hdrc *ci) } +static void ci_hdrc_host_driver_init(void) +{ + +} + #endif #endif /* __DRIVERS_USB_CHIPIDEA_HOST_H */ diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index a048b08b9d4d..ad6c87a4653c 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -96,6 +96,7 @@ static void ci_otg_work(struct work_struct *work) return; } + pm_runtime_get_sync(ci->dev); if (ci->id_event) { ci->id_event = false; ci_handle_id_switch(ci); @@ -104,6 +105,7 @@ static void ci_otg_work(struct work_struct *work) ci_handle_vbus_change(ci); } else dev_err(ci->dev, "unexpected event occurs at %s\n", __func__); + pm_runtime_put_sync(ci->dev); enable_irq(ci->irq); } diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 562e581f6765..19d655a743b5 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -30,22 +30,6 @@ #include "otg.h" #include "otg_fsm.h" -static struct ci_otg_fsm_timer *otg_timer_initializer -(struct ci_hdrc *ci, void (*function)(void *, unsigned long), - unsigned long expires, unsigned long data) -{ - struct ci_otg_fsm_timer *timer; - - timer = devm_kzalloc(ci->dev, sizeof(struct ci_otg_fsm_timer), - GFP_KERNEL); - if (!timer) - return NULL; - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - /* Add for otg: interact with user space app */ static ssize_t get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) @@ -204,229 +188,227 @@ static struct attribute_group inputs_attr_group = { }; /* + * Keep this list in the same order as timers indexed + * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h + */ +static unsigned otg_timer_ms[] = { + TA_WAIT_VRISE, + TA_WAIT_VFALL, + TA_WAIT_BCON, + TA_AIDL_BDIS, + TB_ASE0_BRST, + TA_BIDL_ADIS, + TB_SE0_SRP, + TB_SRP_FAIL, + 0, + TB_DATA_PLS, + TB_SSEND_SRP, +}; + +/* * Add timer to active timer list */ -static void ci_otg_add_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) +static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t) { - struct ci_otg_fsm_timer *tmp_timer; - struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t]; - struct list_head *active_timers = &ci->fsm_timer->active_timers; + unsigned long flags, timer_sec, timer_nsec; - if (t >= NUM_CI_OTG_FSM_TIMERS) + if (t >= NUM_OTG_FSM_TIMERS) return; - /* - * Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - - timer->count = timer->expires; - list_add_tail(&timer->list, active_timers); - - /* Enable 1ms irq */ - if (!(hw_read_otgsc(ci, OTGSC_1MSIE))) - hw_write_otgsc(ci, OTGSC_1MSIE, OTGSC_1MSIE); + spin_lock_irqsave(&ci->lock, flags); + timer_sec = otg_timer_ms[t] / MSEC_PER_SEC; + timer_nsec = (otg_timer_ms[t] % MSEC_PER_SEC) * NSEC_PER_MSEC; + ci->hr_timeouts[t] = ktime_add(ktime_get(), + ktime_set(timer_sec, timer_nsec)); + ci->enabled_otg_timer_bits |= (1 << t); + if ((ci->next_otg_timer == NUM_OTG_FSM_TIMERS) || + (ci->hr_timeouts[ci->next_otg_timer].tv64 > + ci->hr_timeouts[t].tv64)) { + ci->next_otg_timer = t; + hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, + ci->hr_timeouts[t], NSEC_PER_MSEC, + HRTIMER_MODE_ABS); + } + spin_unlock_irqrestore(&ci->lock, flags); } /* * Remove timer from active timer list */ -static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) +static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t) { - struct ci_otg_fsm_timer *tmp_timer, *del_tmp; - struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t]; - struct list_head *active_timers = &ci->fsm_timer->active_timers; + unsigned long flags, enabled_timer_bits; + enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS; - if (t >= NUM_CI_OTG_FSM_TIMERS) + if ((t >= NUM_OTG_FSM_TIMERS) || + !(ci->enabled_otg_timer_bits & (1 << t))) return; - list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); - - /* Disable 1ms irq if there is no any active timer */ - if (list_empty(active_timers)) - hw_write_otgsc(ci, OTGSC_1MSIE, 0); -} - -/* - * Reduce timer count by 1, and find timeout conditions. - * Called by otg 1ms timer interrupt - */ -static inline int ci_otg_tick_timer(struct ci_hdrc *ci) -{ - struct ci_otg_fsm_timer *tmp_timer, *del_tmp; - struct list_head *active_timers = &ci->fsm_timer->active_timers; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(ci, tmp_timer->data); - expired = 1; + spin_lock_irqsave(&ci->lock, flags); + ci->enabled_otg_timer_bits &= ~(1 << t); + if (ci->next_otg_timer == t) { + if (ci->enabled_otg_timer_bits == 0) { + /* No enabled timers after delete it */ + hrtimer_cancel(&ci->otg_fsm_hrtimer); + ci->next_otg_timer = NUM_OTG_FSM_TIMERS; + } else { + /* Find the next timer */ + enabled_timer_bits = ci->enabled_otg_timer_bits; + for_each_set_bit(cur_timer, &enabled_timer_bits, + NUM_OTG_FSM_TIMERS) { + if ((next_timer == NUM_OTG_FSM_TIMERS) || + (ci->hr_timeouts[next_timer].tv64 < + ci->hr_timeouts[cur_timer].tv64)) + next_timer = cur_timer; + } } } - - /* disable 1ms irq if there is no any timer active */ - if ((expired == 1) && list_empty(active_timers)) - hw_write_otgsc(ci, OTGSC_1MSIE, 0); - - return expired; + if (next_timer != NUM_OTG_FSM_TIMERS) { + ci->next_otg_timer = next_timer; + hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, + ci->hr_timeouts[next_timer], NSEC_PER_MSEC, + HRTIMER_MODE_ABS); + } + spin_unlock_irqrestore(&ci->lock, flags); } -/* The timeout callback function to set time out bit */ -static void set_tmout(void *ptr, unsigned long indicator) +/* OTG FSM timer handlers */ +static int a_wait_vrise_tmout(struct ci_hdrc *ci) { - *(int *)indicator = 1; + ci->fsm.a_wait_vrise_tmout = 1; + return 0; } -static void set_tmout_and_fsm(void *ptr, unsigned long indicator) +static int a_wait_vfall_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - - ci_otg_queue_work(ci); + ci->fsm.a_wait_vfall_tmout = 1; + return 0; } -static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator) +static int a_wait_bcon_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - /* Disable port power */ - hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 0); - /* Clear existing DP irq */ - hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); - /* Enable data pulse irq */ - hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE); - ci_otg_queue_work(ci); + ci->fsm.a_wait_bcon_tmout = 1; + return 0; } -static void b_ase0_brst_tmout_func(void *ptr, unsigned long indicator) +static int a_aidl_bdis_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - if (!hw_read_otgsc(ci, OTGSC_BSV)) - ci->fsm.b_sess_vld = 0; - - ci_otg_queue_work(ci); + ci->fsm.a_aidl_bdis_tmout = 1; + return 0; } -static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator) +static int b_ase0_brst_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; - - set_tmout(ci, indicator); - - /* only vbus fall below B_sess_vld in b_idle state */ - if (ci->fsm.otg->state == OTG_STATE_B_IDLE) - ci_otg_queue_work(ci); + ci->fsm.b_ase0_brst_tmout = 1; + return 0; } -static void b_sess_vld_tmout_func(void *ptr, unsigned long indicator) +static int a_bidl_adis_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + ci->fsm.a_bidl_adis_tmout = 1; + return 0; +} - /* Check if A detached */ - if (!(hw_read_otgsc(ci, OTGSC_BSV))) { - ci->fsm.b_sess_vld = 0; - ci_otg_add_timer(ci, B_SSEND_SRP); - ci_otg_queue_work(ci); - } +static int b_se0_srp_tmout(struct ci_hdrc *ci) +{ + ci->fsm.b_se0_srp = 1; + return 0; } -static void b_data_pulse_end(void *ptr, unsigned long indicator) +static int b_srp_fail_tmout(struct ci_hdrc *ci) { - struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + ci->fsm.b_srp_done = 1; + return 1; +} +static int b_data_pls_tmout(struct ci_hdrc *ci) +{ ci->fsm.b_srp_done = 1; ci->fsm.b_bus_req = 0; if (ci->fsm.power_up) ci->fsm.power_up = 0; - hw_write_otgsc(ci, OTGSC_HABA, 0); + pm_runtime_put(ci->dev); + return 0; +} - ci_otg_queue_work(ci); +static int b_ssend_srp_tmout(struct ci_hdrc *ci) +{ + ci->fsm.b_ssend_srp = 1; + /* only vbus fall below B_sess_vld in b_idle state */ + if (ci->fsm.otg->state == OTG_STATE_B_IDLE) + return 0; + else + return 1; +} + +/* + * Keep this list in the same order as timers indexed + * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h + */ +static int (*otg_timer_handlers[])(struct ci_hdrc *) = { + a_wait_vrise_tmout, /* A_WAIT_VRISE */ + a_wait_vfall_tmout, /* A_WAIT_VFALL */ + a_wait_bcon_tmout, /* A_WAIT_BCON */ + a_aidl_bdis_tmout, /* A_AIDL_BDIS */ + b_ase0_brst_tmout, /* B_ASE0_BRST */ + a_bidl_adis_tmout, /* A_BIDL_ADIS */ + b_se0_srp_tmout, /* B_SE0_SRP */ + b_srp_fail_tmout, /* B_SRP_FAIL */ + NULL, /* A_WAIT_ENUM */ + b_data_pls_tmout, /* B_DATA_PLS */ + b_ssend_srp_tmout, /* B_SSEND_SRP */ +}; + +/* + * Enable the next nearest enabled timer if have + */ +static enum hrtimer_restart ci_otg_hrtimer_func(struct hrtimer *t) +{ + struct ci_hdrc *ci = container_of(t, struct ci_hdrc, otg_fsm_hrtimer); + ktime_t now, *timeout; + unsigned long enabled_timer_bits; + unsigned long flags; + enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS; + int ret = -EINVAL; + + spin_lock_irqsave(&ci->lock, flags); + enabled_timer_bits = ci->enabled_otg_timer_bits; + ci->next_otg_timer = NUM_OTG_FSM_TIMERS; + + now = ktime_get(); + for_each_set_bit(cur_timer, &enabled_timer_bits, NUM_OTG_FSM_TIMERS) { + if (now.tv64 >= ci->hr_timeouts[cur_timer].tv64) { + ci->enabled_otg_timer_bits &= ~(1 << cur_timer); + if (otg_timer_handlers[cur_timer]) + ret = otg_timer_handlers[cur_timer](ci); + } else { + if ((next_timer == NUM_OTG_FSM_TIMERS) || + (ci->hr_timeouts[cur_timer].tv64 < + ci->hr_timeouts[next_timer].tv64)) + next_timer = cur_timer; + } + } + /* Enable the next nearest timer */ + if (next_timer < NUM_OTG_FSM_TIMERS) { + timeout = &ci->hr_timeouts[next_timer]; + hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, *timeout, + NSEC_PER_MSEC, HRTIMER_MODE_ABS); + ci->next_otg_timer = next_timer; + } + spin_unlock_irqrestore(&ci->lock, flags); + + if (!ret) + ci_otg_queue_work(ci); + + return HRTIMER_NORESTART; } /* Initialize timers */ static int ci_otg_init_timers(struct ci_hdrc *ci) { - struct otg_fsm *fsm = &ci->fsm; - - /* FSM used timers */ - ci->fsm_timer->timer_list[A_WAIT_VRISE] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_VRISE, - (unsigned long)&fsm->a_wait_vrise_tmout); - if (ci->fsm_timer->timer_list[A_WAIT_VRISE] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_WAIT_VFALL] = - otg_timer_initializer(ci, &a_wait_vfall_tmout_func, - TA_WAIT_VFALL, (unsigned long)&fsm->a_wait_vfall_tmout); - if (ci->fsm_timer->timer_list[A_WAIT_VFALL] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_WAIT_BCON] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_BCON, - (unsigned long)&fsm->a_wait_bcon_tmout); - if (ci->fsm_timer->timer_list[A_WAIT_BCON] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_AIDL_BDIS] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_AIDL_BDIS, - (unsigned long)&fsm->a_aidl_bdis_tmout); - if (ci->fsm_timer->timer_list[A_AIDL_BDIS] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[A_BIDL_ADIS] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TA_BIDL_ADIS, - (unsigned long)&fsm->a_bidl_adis_tmout); - if (ci->fsm_timer->timer_list[A_BIDL_ADIS] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_ASE0_BRST] = - otg_timer_initializer(ci, &b_ase0_brst_tmout_func, TB_ASE0_BRST, - (unsigned long)&fsm->b_ase0_brst_tmout); - if (ci->fsm_timer->timer_list[B_ASE0_BRST] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SE0_SRP] = - otg_timer_initializer(ci, &set_tmout_and_fsm, TB_SE0_SRP, - (unsigned long)&fsm->b_se0_srp); - if (ci->fsm_timer->timer_list[B_SE0_SRP] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SSEND_SRP] = - otg_timer_initializer(ci, &b_ssend_srp_tmout_func, TB_SSEND_SRP, - (unsigned long)&fsm->b_ssend_srp); - if (ci->fsm_timer->timer_list[B_SSEND_SRP] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SRP_FAIL] = - otg_timer_initializer(ci, &set_tmout, TB_SRP_FAIL, - (unsigned long)&fsm->b_srp_done); - if (ci->fsm_timer->timer_list[B_SRP_FAIL] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_DATA_PLS] = - otg_timer_initializer(ci, &b_data_pulse_end, TB_DATA_PLS, 0); - if (ci->fsm_timer->timer_list[B_DATA_PLS] == NULL) - return -ENOMEM; - - ci->fsm_timer->timer_list[B_SESS_VLD] = otg_timer_initializer(ci, - &b_sess_vld_tmout_func, TB_SESS_VLD, 0); - if (ci->fsm_timer->timer_list[B_SESS_VLD] == NULL) - return -ENOMEM; + hrtimer_init(&ci->otg_fsm_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + ci->otg_fsm_hrtimer.function = ci_otg_hrtimer_func; return 0; } @@ -530,6 +512,7 @@ static void ci_otg_start_pulse(struct otg_fsm *fsm) /* Hardware Assistant Data pulse */ hw_write_otgsc(ci, OTGSC_HADP, OTGSC_HADP); + pm_runtime_get(ci->dev); ci_otg_add_timer(ci, B_DATA_PLS); } @@ -537,7 +520,6 @@ static int ci_otg_start_host(struct otg_fsm *fsm, int on) { struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); - mutex_unlock(&fsm->lock); if (on) { ci_role_stop(ci); ci_role_start(ci, CI_ROLE_HOST); @@ -546,7 +528,6 @@ static int ci_otg_start_host(struct otg_fsm *fsm, int on) hw_device_reset(ci); ci_role_start(ci, CI_ROLE_GADGET); } - mutex_lock(&fsm->lock); return 0; } @@ -554,12 +535,10 @@ static int ci_otg_start_gadget(struct otg_fsm *fsm, int on) { struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); - mutex_unlock(&fsm->lock); if (on) usb_gadget_vbus_connect(&ci->gadget); else usb_gadget_vbus_disconnect(&ci->gadget); - mutex_lock(&fsm->lock); return 0; } @@ -585,6 +564,7 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) ci->fsm.otg->state < OTG_STATE_A_IDLE) return 0; + pm_runtime_get_sync(ci->dev); if (otg_statemachine(&ci->fsm)) { if (ci->fsm.otg->state == OTG_STATE_A_IDLE) { /* @@ -596,8 +576,15 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) * a_idle to a_wait_vrise when power up */ if ((ci->fsm.id) || (ci->id_event) || - (ci->fsm.power_up)) + (ci->fsm.power_up)) { ci_otg_queue_work(ci); + } else { + /* Enable data pulse irq */ + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | + PORTSC_PP, 0); + hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); + hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE); + } if (ci->id_event) ci->id_event = false; } else if (ci->fsm.otg->state == OTG_STATE_B_IDLE) { @@ -609,8 +596,13 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) */ ci_otg_queue_work(ci); } + } else if (ci->fsm.otg->state == OTG_STATE_A_HOST) { + pm_runtime_mark_last_busy(ci->dev); + pm_runtime_put_autosuspend(ci->dev); + return 0; } } + pm_runtime_put_sync(ci->dev); return 0; } @@ -655,7 +647,6 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci) fsm->a_conn = 0; fsm->b_bus_req = 0; ci_otg_queue_work(ci); - ci_otg_add_timer(ci, B_SESS_VLD); } break; case OTG_STATE_A_PERIPHERAL: @@ -725,11 +716,7 @@ irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci) fsm->id = (otgsc & OTGSC_ID) ? 1 : 0; if (otg_int_src) { - if (otg_int_src & OTGSC_1MSIS) { - hw_write_otgsc(ci, OTGSC_1MSIS, OTGSC_1MSIS); - retval = ci_otg_tick_timer(ci); - return IRQ_HANDLED; - } else if (otg_int_src & OTGSC_DPIS) { + if (otg_int_src & OTGSC_DPIS) { hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); fsm->a_srp_det = 1; fsm->a_bus_drop = 0; @@ -793,17 +780,13 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) mutex_init(&ci->fsm.lock); - ci->fsm_timer = devm_kzalloc(ci->dev, - sizeof(struct ci_otg_fsm_timer_list), GFP_KERNEL); - if (!ci->fsm_timer) - return -ENOMEM; - - INIT_LIST_HEAD(&ci->fsm_timer->active_timers); retval = ci_otg_init_timers(ci); if (retval) { dev_err(ci->dev, "Couldn't init OTG timers\n"); return retval; } + ci->enabled_otg_timer_bits = 0; + ci->next_otg_timer = NUM_OTG_FSM_TIMERS; retval = sysfs_create_group(&ci->dev->kobj, &inputs_attr_group); if (retval < 0) { diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index 94c085f456a9..2689375ae5da 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -62,33 +62,6 @@ /* SSEND time before SRP */ #define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */ -#define TB_SESS_VLD (1000) - -enum ci_otg_fsm_timer_index { - /* - * CI specific timers, start from the end - * of standard and auxiliary OTG timers - */ - B_DATA_PLS = NUM_OTG_FSM_TIMERS, - B_SSEND_SRP, - B_SESS_VLD, - - NUM_CI_OTG_FSM_TIMERS, -}; - -struct ci_otg_fsm_timer { - unsigned long expires; /* Number of count increase to timeout */ - unsigned long count; /* Tick counter */ - void (*function)(void *, unsigned long); /* Timeout function */ - unsigned long data; /* Data passed to function */ - struct list_head list; -}; - -struct ci_otg_fsm_timer_list { - struct ci_otg_fsm_timer *timer_list[NUM_CI_OTG_FSM_TIMERS]; - struct list_head active_timers; -}; - #ifdef CONFIG_USB_OTG_FSM int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 4bfb7ac0239f..764f668d45a9 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -86,10 +86,8 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma) /* interrupt, error, port change, reset, sleep/suspend */ hw_write(ci, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { hw_write(ci, OP_USBINTR, ~0, 0); - hw_write(ci, OP_USBCMD, USBCMD_RS, 0); } return 0; } @@ -522,6 +520,20 @@ static void free_pending_td(struct ci_hw_ep *hwep) kfree(pending); } +static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep, + struct td_node *node) +{ + hwep->qh.ptr->td.next = node->dma; + hwep->qh.ptr->td.token &= + cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE)); + + /* Synchronize before ep prime */ + wmb(); + + return hw_ep_prime(ci, hwep->num, hwep->dir, + hwep->type == USB_ENDPOINT_XFER_CONTROL); +} + /** * _hardware_dequeue: handles a request at hardware level * @gadget: gadget @@ -535,6 +547,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) struct td_node *node, *tmpnode; unsigned remaining_length; unsigned actual = hwreq->req.length; + struct ci_hdrc *ci = hwep->ci; if (hwreq->req.status != -EALREADY) return -EINVAL; @@ -544,6 +557,11 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { tmptoken = le32_to_cpu(node->ptr->token); if ((TD_STATUS_ACTIVE & tmptoken) != 0) { + int n = hw_ep_bit(hwep->num, hwep->dir); + + if (ci->rev == CI_REVISION_24) + if (!hw_read(ci, OP_ENDPTSTAT, BIT(n))) + reprime_dtd(ci, hwep, node); hwreq->req.status = -EALREADY; return -EBUSY; } @@ -1162,10 +1180,13 @@ static int ep_enable(struct usb_ep *ep, /* only internal SW should enable ctrl endpts */ - hwep->ep.desc = desc; - - if (!list_empty(&hwep->qh.queue)) + if (!list_empty(&hwep->qh.queue)) { dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n"); + spin_unlock_irqrestore(hwep->lock, flags); + return -EBUSY; + } + + hwep->ep.desc = desc; hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX; hwep->num = usb_endpoint_num(desc); @@ -1485,7 +1506,9 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) hw_device_reset(ci); hw_device_state(ci, ci->ep0out->qh.dma); usb_gadget_set_state(_gadget, USB_STATE_POWERED); + usb_udc_vbus_handler(_gadget, true); } else { + usb_udc_vbus_handler(_gadget, false); if (ci->driver) ci->driver->disconnect(&ci->gadget); hw_device_state(ci, 0); @@ -1551,13 +1574,16 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) { struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); - if (!ci->vbus_active) - return -EOPNOTSUPP; + /* Data+ pullup controlled by OTG state machine in OTG fsm mode */ + if (ci_otg_is_fsm_mode(ci)) + return 0; + pm_runtime_get_sync(&ci->gadget.dev); if (is_on) hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); else hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + pm_runtime_put_sync(&ci->gadget.dev); return 0; } @@ -1687,6 +1713,7 @@ static int ci_udc_start(struct usb_gadget *gadget, spin_lock_irqsave(&ci->lock, flags); hw_device_reset(ci); } else { + usb_udc_vbus_handler(&ci->gadget, false); pm_runtime_put_sync(&ci->gadget.dev); return retval; } diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index c3c6225b8acf..3cefd49ddb00 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/of_platform.h> -#include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> #include <linux/delay.h> @@ -56,6 +55,19 @@ #define MX53_USB_PLL_DIV_24_MHZ 0x01 #define MX6_BM_OVER_CUR_DIS BIT(7) +#define MX6_BM_WAKEUP_ENABLE BIT(10) +#define MX6_BM_ID_WAKEUP BIT(16) +#define MX6_BM_VBUS_WAKEUP BIT(17) +#define MX6SX_BM_DPDM_WAKEUP_EN BIT(29) +#define MX6_BM_WAKEUP_INTR BIT(31) +#define MX6_USB_OTG1_PHY_CTRL 0x18 +/* For imx6dql, it is host-only controller, for later imx6, it is otg's */ +#define MX6_USB_OTG2_PHY_CTRL 0x1c +#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3) #define VF610_OVER_CUR_DIS BIT(7) @@ -64,12 +76,13 @@ struct usbmisc_ops { int (*init)(struct imx_usbmisc_data *data); /* It's called once after adding a usb device */ int (*post)(struct imx_usbmisc_data *data); + /* It's called when we need to enable/disable usb wakeup */ + int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled); }; struct imx_usbmisc { void __iomem *base; spinlock_t lock; - struct clk *clk; const struct usbmisc_ops *ops; }; @@ -147,7 +160,7 @@ static int usbmisc_imx27_init(struct imx_usbmisc_data *data) break; default: return -EINVAL; - }; + } spin_lock_irqsave(&usbmisc->lock, flags); if (data->disable_oc) @@ -204,6 +217,35 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) return 0; } +static int usbmisc_imx6q_set_wakeup + (struct imx_usbmisc_data *data, bool enabled) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val; + u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE | + MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP); + int ret = 0; + + if (data->index > 3) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + data->index * 4); + if (enabled) { + val |= wakeup_setting; + writel(val, usbmisc->base + data->index * 4); + } else { + if (val & MX6_BM_WAKEUP_INTR) + pr_debug("wakeup int at ci_hdrc.%d\n", data->index); + val &= ~wakeup_setting; + writel(val, usbmisc->base + data->index * 4); + } + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return ret; +} + static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); @@ -221,6 +263,36 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) spin_unlock_irqrestore(&usbmisc->lock, flags); } + usbmisc_imx6q_set_wakeup(data, false); + + return 0; +} + +static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) +{ + void __iomem *reg = NULL; + unsigned long flags; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + u32 val; + + usbmisc_imx6q_init(data); + + if (data->index == 0 || data->index == 1) { + reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4; + spin_lock_irqsave(&usbmisc->lock, flags); + /* Set vbus wakeup source as bvalid */ + val = readl(reg); + writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg); + /* + * Disable dp/dm wakeup in device mode when vbus is + * not there. + */ + val = readl(usbmisc->base + data->index * 4); + writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN, + usbmisc->base + data->index * 4); + spin_unlock_irqrestore(&usbmisc->lock, flags); + } + return 0; } @@ -258,6 +330,7 @@ static const struct usbmisc_ops imx53_usbmisc_ops = { }; static const struct usbmisc_ops imx6q_usbmisc_ops = { + .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6q_init, }; @@ -265,10 +338,19 @@ static const struct usbmisc_ops vf610_usbmisc_ops = { .init = usbmisc_vf610_init, }; +static const struct usbmisc_ops imx6sx_usbmisc_ops = { + .set_wakeup = usbmisc_imx6q_set_wakeup, + .init = usbmisc_imx6sx_init, +}; + int imx_usbmisc_init(struct imx_usbmisc_data *data) { - struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + struct imx_usbmisc *usbmisc; + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->init) return 0; return usbmisc->ops->init(data); @@ -277,14 +359,32 @@ EXPORT_SYMBOL_GPL(imx_usbmisc_init); int imx_usbmisc_init_post(struct imx_usbmisc_data *data) { - struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->post) return 0; return usbmisc->ops->post(data); } EXPORT_SYMBOL_GPL(imx_usbmisc_init_post); +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->set_wakeup) + return 0; + return usbmisc->ops->set_wakeup(data, enabled); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); + static const struct of_device_id usbmisc_imx_dt_ids[] = { { .compatible = "fsl,imx25-usbmisc", @@ -314,6 +414,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { .compatible = "fsl,vf610-usbmisc", .data = &vf610_usbmisc_ops, }, + { + .compatible = "fsl,imx6sx-usbmisc", + .data = &imx6sx_usbmisc_ops, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); @@ -322,7 +426,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev) { struct resource *res; struct imx_usbmisc *data; - int ret; struct of_device_id *tmp_dev; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); @@ -336,20 +439,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev) if (IS_ERR(data->base)) return PTR_ERR(data->base); - data->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(data->clk)) { - dev_err(&pdev->dev, - "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); - return PTR_ERR(data->clk); - } - - ret = clk_prepare_enable(data->clk); - if (ret) { - dev_err(&pdev->dev, - "clk_prepare_enable failed, err=%d\n", ret); - return ret; - } - tmp_dev = (struct of_device_id *) of_match_device(usbmisc_imx_dt_ids, &pdev->dev); data->ops = (const struct usbmisc_ops *)tmp_dev->data; @@ -360,8 +449,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev) static int usbmisc_imx_remove(struct platform_device *pdev) { - struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev); - clk_disable_unprepare(usbmisc->clk); return 0; } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 683617714e7c..b30e7423549b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -46,6 +46,7 @@ #include <linux/usb/cdc.h> #include <asm/byteorder.h> #include <asm/unaligned.h> +#include <linux/idr.h> #include <linux/list.h> #include "cdc-acm.h" @@ -56,27 +57,27 @@ static struct usb_driver acm_driver; static struct tty_driver *acm_tty_driver; -static struct acm *acm_table[ACM_TTY_MINORS]; -static DEFINE_MUTEX(acm_table_lock); +static DEFINE_IDR(acm_minors); +static DEFINE_MUTEX(acm_minors_lock); static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old); /* - * acm_table accessors + * acm_minors accessors */ /* - * Look up an ACM structure by index. If found and not disconnected, increment + * Look up an ACM structure by minor. If found and not disconnected, increment * its refcount and return it with its mutex held. */ -static struct acm *acm_get_by_index(unsigned index) +static struct acm *acm_get_by_minor(unsigned int minor) { struct acm *acm; - mutex_lock(&acm_table_lock); - acm = acm_table[index]; + mutex_lock(&acm_minors_lock); + acm = idr_find(&acm_minors, minor); if (acm) { mutex_lock(&acm->mutex); if (acm->disconnected) { @@ -87,7 +88,7 @@ static struct acm *acm_get_by_index(unsigned index) mutex_unlock(&acm->mutex); } } - mutex_unlock(&acm_table_lock); + mutex_unlock(&acm_minors_lock); return acm; } @@ -98,14 +99,9 @@ static int acm_alloc_minor(struct acm *acm) { int minor; - mutex_lock(&acm_table_lock); - for (minor = 0; minor < ACM_TTY_MINORS; minor++) { - if (!acm_table[minor]) { - acm_table[minor] = acm; - break; - } - } - mutex_unlock(&acm_table_lock); + mutex_lock(&acm_minors_lock); + minor = idr_alloc(&acm_minors, acm, 0, ACM_TTY_MINORS, GFP_KERNEL); + mutex_unlock(&acm_minors_lock); return minor; } @@ -113,9 +109,9 @@ static int acm_alloc_minor(struct acm *acm) /* Release the minor number associated with 'acm'. */ static void acm_release_minor(struct acm *acm) { - mutex_lock(&acm_table_lock); - acm_table[acm->minor] = NULL; - mutex_unlock(&acm_table_lock); + mutex_lock(&acm_minors_lock); + idr_remove(&acm_minors, acm->minor); + mutex_unlock(&acm_minors_lock); } /* @@ -360,7 +356,7 @@ static void acm_ctrl_irq(struct urb *urb) } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) + if (retval && retval != -EPERM) dev_err(&acm->control->dev, "%s - usb_submit_urb failed: %d\n", __func__, retval); } @@ -417,25 +413,33 @@ static void acm_read_bulk_callback(struct urb *urb) struct acm_rb *rb = urb->context; struct acm *acm = rb->instance; unsigned long flags; + int status = urb->status; dev_vdbg(&acm->data->dev, "%s - urb %d, len %d\n", __func__, rb->index, urb->actual_length); - set_bit(rb->index, &acm->read_urbs_free); if (!acm->dev) { + set_bit(rb->index, &acm->read_urbs_free); dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__); return; } - if (urb->status) { + if (status) { + set_bit(rb->index, &acm->read_urbs_free); dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n", - __func__, urb->status); + __func__, status); return; } usb_mark_last_busy(acm->dev); acm_process_read_urb(acm, urb); + /* + * Unthrottle may run on another CPU which needs to see events + * in the same order. Submission has an implict barrier + */ + smp_mb__before_atomic(); + set_bit(rb->index, &acm->read_urbs_free); /* throttle device if requested by tty */ spin_lock_irqsave(&acm->read_lock, flags); @@ -454,13 +458,14 @@ static void acm_write_bulk(struct urb *urb) struct acm_wb *wb = urb->context; struct acm *acm = wb->instance; unsigned long flags; + int status = urb->status; - if (urb->status || (urb->actual_length != urb->transfer_buffer_length)) + if (status || (urb->actual_length != urb->transfer_buffer_length)) dev_vdbg(&acm->data->dev, "%s - len %d/%d, status %d\n", __func__, urb->actual_length, urb->transfer_buffer_length, - urb->status); + status); spin_lock_irqsave(&acm->write_lock, flags); acm_write_done(acm, wb); @@ -488,7 +493,7 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty) dev_dbg(tty->dev, "%s\n", __func__); - acm = acm_get_by_index(tty->index); + acm = acm_get_by_minor(tty->index); if (!acm) return -ENODEV; @@ -1133,11 +1138,16 @@ static int acm_probe(struct usb_interface *intf, } while (buflen > 0) { + elength = buffer[0]; + if (!elength) { + dev_err(&intf->dev, "skipping garbage byte\n"); + elength = 1; + goto next_desc; + } if (buffer[1] != USB_DT_CS_INTERFACE) { dev_err(&intf->dev, "skipping garbage\n"); goto next_desc; } - elength = buffer[0]; switch (buffer[2]) { case USB_CDC_UNION_TYPE: /* we've found it */ @@ -1253,12 +1263,9 @@ skip_normal_probe: != CDC_DATA_INTERFACE_TYPE) { if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) { - struct usb_interface *t; dev_dbg(&intf->dev, "Your device has switched interfaces.\n"); - t = control_interface; - control_interface = data_interface; - data_interface = t; + swap(control_interface, data_interface); } else { return -EINVAL; } @@ -1287,12 +1294,9 @@ skip_normal_probe: /* workaround for switched endpoints */ if (!usb_endpoint_dir_in(epread)) { /* descriptors are swapped */ - struct usb_endpoint_descriptor *t; dev_dbg(&intf->dev, "The data interface has switched endpoints\n"); - t = epread; - epread = epwrite; - epwrite = t; + swap(epread, epwrite); } made_compressed_probe: dev_dbg(&intf->dev, "interfaces are valid\n"); @@ -1302,7 +1306,7 @@ made_compressed_probe: goto alloc_fail; minor = acm_alloc_minor(acm); - if (minor == ACM_TTY_MINORS) { + if (minor < 0) { dev_err(&intf->dev, "no more free acm devices\n"); kfree(acm); return -ENODEV; @@ -1463,6 +1467,11 @@ skip_countries: goto alloc_fail8; } + if (quirks & CLEAR_HALT_CONDITIONS) { + usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress)); + usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress)); + } + return 0; alloc_fail8: if (acm->country_codes) { @@ -1742,6 +1751,10 @@ static const struct usb_device_id acm_ids[] = { .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, + { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ + .driver_info = CLEAR_HALT_CONDITIONS, + }, + /* Nokia S60 phones expose two ACM channels. The first is * a modem and is picked up by the standard AT-command * information below. The second is 'vendor-specific' but @@ -1931,6 +1944,7 @@ static void __exit acm_exit(void) usb_deregister(&acm_driver); tty_unregister_driver(acm_tty_driver); put_tty_driver(acm_tty_driver); + idr_destroy(&acm_minors); } module_init(acm_init); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index ffeb3c83941f..dd9af38e7cda 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -19,7 +19,7 @@ */ #define ACM_TTY_MAJOR 166 -#define ACM_TTY_MINORS 32 +#define ACM_TTY_MINORS 256 /* * Requests. @@ -133,3 +133,4 @@ struct acm { #define NO_DATA_INTERFACE BIT(4) #define IGNORE_DEVICE BIT(5) #define QUIRK_CONTROL_LINE_STATE BIT(6) +#define CLEAR_HALT_CONDITIONS BIT(7) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index a051a7a2b1bd..61ea87917433 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -245,7 +245,7 @@ static void wdm_int_callback(struct urb *urb) case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: dev_dbg(&desc->intf->dev, "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d", - dr->wIndex, dr->wLength); + le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength)); break; case USB_CDC_NOTIFY_NETWORK_CONNECTION: @@ -262,7 +262,9 @@ static void wdm_int_callback(struct urb *urb) clear_bit(WDM_POLL_RUNNING, &desc->flags); dev_err(&desc->intf->dev, "unknown notification %d received: index %d len %d\n", - dr->bNotificationType, dr->wIndex, dr->wLength); + dr->bNotificationType, + le16_to_cpu(dr->wIndex), + le16_to_cpu(dr->wLength)); goto exit; } @@ -339,7 +341,7 @@ static ssize_t wdm_write desc->werr = 0; spin_unlock_irq(&desc->iuspin); if (we < 0) - return -EIO; + return usb_translate_errors(we); buf = kmalloc(count, GFP_KERNEL); if (!buf) { @@ -349,30 +351,25 @@ static ssize_t wdm_write r = copy_from_user(buf, buffer, count); if (r > 0) { - kfree(buf); rv = -EFAULT; - goto outnl; + goto out_free_mem; } /* concurrent writes and disconnect */ r = mutex_lock_interruptible(&desc->wlock); rv = -ERESTARTSYS; - if (r) { - kfree(buf); - goto outnl; - } + if (r) + goto out_free_mem; if (test_bit(WDM_DISCONNECTING, &desc->flags)) { - kfree(buf); rv = -ENODEV; - goto outnp; + goto out_free_mem_lock; } r = usb_autopm_get_interface(desc->intf); if (r < 0) { - kfree(buf); rv = usb_translate_errors(r); - goto outnp; + goto out_free_mem_lock; } if (!(file->f_flags & O_NONBLOCK)) @@ -386,9 +383,8 @@ static ssize_t wdm_write r = -EIO; if (r < 0) { - kfree(buf); rv = r; - goto out; + goto out_free_mem_pm; } req = desc->orq; @@ -408,28 +404,35 @@ static ssize_t wdm_write USB_RECIP_INTERFACE); req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND; req->wValue = 0; - req->wIndex = desc->inum; + req->wIndex = desc->inum; /* already converted */ req->wLength = cpu_to_le16(count); set_bit(WDM_IN_USE, &desc->flags); desc->outbuf = buf; rv = usb_submit_urb(desc->command, GFP_KERNEL); if (rv < 0) { - kfree(buf); desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); rv = usb_translate_errors(rv); + goto out_free_mem_pm; } else { dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d", - req->wIndex); + le16_to_cpu(req->wIndex)); } -out: + usb_autopm_put_interface(desc->intf); -outnp: mutex_unlock(&desc->wlock); outnl: return rv < 0 ? rv : count; + +out_free_mem_pm: + usb_autopm_put_interface(desc->intf); +out_free_mem_lock: + mutex_unlock(&desc->wlock); +out_free_mem: + kfree(buf); + return rv; } /* @@ -519,9 +522,9 @@ retry: spin_lock_irq(&desc->iuspin); if (desc->rerr) { /* read completed, error happened */ + rv = usb_translate_errors(desc->rerr); desc->rerr = 0; spin_unlock_irq(&desc->iuspin); - rv = -EIO; goto err; } /* @@ -820,7 +823,7 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE); desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; desc->irq->wValue = 0; - desc->irq->wIndex = desc->inum; + desc->irq->wIndex = desc->inum; /* already converted */ desc->irq->wLength = cpu_to_le16(desc->wMaxCommand); usb_fill_control_urb( diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 0924ee40a966..f38e875a3fb1 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -660,7 +660,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (cmd) { case LPGETSTATUS: - if ((retval = usblp_read_status(usblp, usblp->statusbuf))) { + retval = usblp_read_status(usblp, usblp->statusbuf); + if (retval) { printk_ratelimited(KERN_ERR "usblp%d:" "failed reading printer status (%d)\n", usblp->minor, retval); @@ -693,9 +694,11 @@ static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length) struct urb *urb; char *writebuf; - if ((writebuf = kmalloc(transfer_length, GFP_KERNEL)) == NULL) + writebuf = kmalloc(transfer_length, GFP_KERNEL); + if (writebuf == NULL) return NULL; - if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) { kfree(writebuf); return NULL; } @@ -732,7 +735,8 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t transfer_length = USBLP_BUF_SIZE; rv = -ENOMEM; - if ((writeurb = usblp_new_writeurb(usblp, transfer_length)) == NULL) + writeurb = usblp_new_writeurb(usblp, transfer_length); + if (writeurb == NULL) goto raise_urb; usb_anchor_urb(writeurb, &usblp->urbs); @@ -980,7 +984,8 @@ static int usblp_submit_read(struct usblp *usblp) int rc; rc = -ENOMEM; - if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) goto raise_urb; usb_fill_bulk_urb(urb, usblp->dev, diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 960bc089111b..7a11a8263171 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -109,6 +109,7 @@ struct usbtmc_ID_rigol_quirk { static const struct usbtmc_ID_rigol_quirk usbtmc_id_quirk[] = { { 0x1ab1, 0x0588 }, + { 0x1ab1, 0x04b0 }, { 0, 0 } }; diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index ca2f8bd0e431..6bbb3ec17018 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -7,3 +7,4 @@ usb-common-y += common.o usb-common-$(CONFIG_USB_LED_TRIG) += led.o obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o +obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c new file mode 100644 index 000000000000..01c0c0477a9e --- /dev/null +++ b/drivers/usb/common/ulpi.c @@ -0,0 +1,255 @@ +/** + * ulpi.c - USB ULPI PHY bus + * + * Copyright (C) 2015 Intel Corporation + * + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/ulpi/interface.h> +#include <linux/ulpi/driver.h> +#include <linux/ulpi/regs.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/acpi.h> + +/* -------------------------------------------------------------------------- */ + +int ulpi_read(struct ulpi *ulpi, u8 addr) +{ + return ulpi->ops->read(ulpi->ops, addr); +} +EXPORT_SYMBOL_GPL(ulpi_read); + +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) +{ + return ulpi->ops->write(ulpi->ops, addr, val); +} +EXPORT_SYMBOL_GPL(ulpi_write); + +/* -------------------------------------------------------------------------- */ + +static int ulpi_match(struct device *dev, struct device_driver *driver) +{ + struct ulpi_driver *drv = to_ulpi_driver(driver); + struct ulpi *ulpi = to_ulpi_dev(dev); + const struct ulpi_device_id *id; + + for (id = drv->id_table; id->vendor; id++) + if (id->vendor == ulpi->id.vendor && + id->product == ulpi->id.product) + return 1; + + return 0; +} + +static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct ulpi *ulpi = to_ulpi_dev(dev); + + if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x", + ulpi->id.vendor, ulpi->id.product)) + return -ENOMEM; + return 0; +} + +static int ulpi_probe(struct device *dev) +{ + struct ulpi_driver *drv = to_ulpi_driver(dev->driver); + + return drv->probe(to_ulpi_dev(dev)); +} + +static int ulpi_remove(struct device *dev) +{ + struct ulpi_driver *drv = to_ulpi_driver(dev->driver); + + if (drv->remove) + drv->remove(to_ulpi_dev(dev)); + + return 0; +} + +static struct bus_type ulpi_bus = { + .name = "ulpi", + .match = ulpi_match, + .uevent = ulpi_uevent, + .probe = ulpi_probe, + .remove = ulpi_remove, +}; + +/* -------------------------------------------------------------------------- */ + +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ulpi *ulpi = to_ulpi_dev(dev); + + return sprintf(buf, "ulpi:v%04xp%04x\n", + ulpi->id.vendor, ulpi->id.product); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *ulpi_dev_attrs[] = { + &dev_attr_modalias.attr, + NULL +}; + +static struct attribute_group ulpi_dev_attr_group = { + .attrs = ulpi_dev_attrs, +}; + +static const struct attribute_group *ulpi_dev_attr_groups[] = { + &ulpi_dev_attr_group, + NULL +}; + +static void ulpi_dev_release(struct device *dev) +{ + kfree(to_ulpi_dev(dev)); +} + +static struct device_type ulpi_dev_type = { + .name = "ulpi_device", + .groups = ulpi_dev_attr_groups, + .release = ulpi_dev_release, +}; + +/* -------------------------------------------------------------------------- */ + +/** + * ulpi_register_driver - register a driver with the ULPI bus + * @drv: driver being registered + * + * Registers a driver with the ULPI bus. + */ +int ulpi_register_driver(struct ulpi_driver *drv) +{ + if (!drv->probe) + return -EINVAL; + + drv->driver.bus = &ulpi_bus; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(ulpi_register_driver); + +/** + * ulpi_unregister_driver - unregister a driver with the ULPI bus + * @drv: driver to unregister + * + * Unregisters a driver with the ULPI bus. + */ +void ulpi_unregister_driver(struct ulpi_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(ulpi_unregister_driver); + +/* -------------------------------------------------------------------------- */ + +static int ulpi_register(struct device *dev, struct ulpi *ulpi) +{ + int ret; + + /* Test the interface */ + ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); + if (ret < 0) + return ret; + + ret = ulpi_read(ulpi, ULPI_SCRATCH); + if (ret < 0) + return ret; + + if (ret != 0xaa) + return -ENODEV; + + ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW); + ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8; + + ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW); + ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8; + + ulpi->dev.parent = dev; + ulpi->dev.bus = &ulpi_bus; + ulpi->dev.type = &ulpi_dev_type; + dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev)); + + ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev)); + + request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product); + + ret = device_register(&ulpi->dev); + if (ret) + return ret; + + dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n", + ulpi->id.vendor, ulpi->id.product); + + return 0; +} + +/** + * ulpi_register_interface - instantiate new ULPI device + * @dev: USB controller's device interface + * @ops: ULPI register access + * + * Allocates and registers a ULPI device and an interface for it. Called from + * the USB controller that provides the ULPI interface. + */ +struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops) +{ + struct ulpi *ulpi; + int ret; + + ulpi = kzalloc(sizeof(*ulpi), GFP_KERNEL); + if (!ulpi) + return ERR_PTR(-ENOMEM); + + ulpi->ops = ops; + ops->dev = dev; + + ret = ulpi_register(dev, ulpi); + if (ret) { + kfree(ulpi); + return ERR_PTR(ret); + } + + return ulpi; +} +EXPORT_SYMBOL_GPL(ulpi_register_interface); + +/** + * ulpi_unregister_interface - unregister ULPI interface + * @intrf: struct ulpi_interface + * + * Unregisters a ULPI device and it's interface that was created with + * ulpi_create_interface(). + */ +void ulpi_unregister_interface(struct ulpi *ulpi) +{ + device_unregister(&ulpi->dev); +} +EXPORT_SYMBOL_GPL(ulpi_unregister_interface); + +/* -------------------------------------------------------------------------- */ + +static int __init ulpi_init(void) +{ + return bus_register(&ulpi_bus); +} +subsys_initcall(ulpi_init); + +static void __exit ulpi_exit(void) +{ + bus_unregister(&ulpi_bus); +} +module_exit(ulpi_exit); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("USB ULPI PHY bus"); diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index cc0ced08bae2..a99c89e78126 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -84,3 +84,23 @@ config USB_OTG_FSM Implements OTG Finite State Machine as specified in On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification. +config USB_ULPI_BUS + tristate "USB ULPI PHY interface support" + depends on USB_SUPPORT + help + UTMI+ Low Pin Interface (ULPI) is specification for a commonly used + USB 2.0 PHY interface. The ULPI specification defines a standard set + of registers that can be used to detect the vendor and product which + allows ULPI to be handled as a bus. This module is the driver for that + bus. + + The ULPI interfaces (the buses) are registered by the drivers for USB + controllers which support ULPI register access and have ULPI PHY + attached to them. The ULPI PHY drivers themselves are normal PHY + drivers. + + ULPI PHYs provide often functions such as ADP sensing/probing (OTG + protocol) and USB charger detection. + + To compile this driver as a module, choose M here: the module will + be called ulpi. diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 506b969ea7fd..89f2e7765093 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -70,7 +70,7 @@ int hcd_buffer_create(struct usb_hcd *hcd) size = pool_max[i]; if (!size) continue; - snprintf(name, sizeof name, "buffer-%d", size); + snprintf(name, sizeof(name), "buffer-%d", size); hcd->pool[i] = dma_pool_create(name, hcd->self.controller, size, size, 0); if (!hcd->pool[i]) { @@ -95,6 +95,7 @@ void hcd_buffer_destroy(struct usb_hcd *hcd) for (i = 0; i < HCD_BUFFER_POOLS; i++) { struct dma_pool *pool = hcd->pool[i]; + if (pool) { dma_pool_destroy(pool); hcd->pool[i] = NULL; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 11635537c052..986abde07683 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -513,7 +513,7 @@ static void async_completed(struct urb *urb) snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length, as->status, COMPLETE, NULL, 0); - if ((urb->transfer_flags & URB_DIR_MASK) == USB_DIR_IN) + if ((urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN) snoop_urb_data(urb, urb->actual_length); if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET && @@ -2408,7 +2408,7 @@ static int usbdev_notify(struct notifier_block *self, } static struct notifier_block usbdev_nb = { - .notifier_call = usbdev_notify, + .notifier_call = usbdev_notify, }; static struct cdev usb_device_cdev; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 45a915ccd71c..cbcd0920fb51 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1022,9 +1022,12 @@ static int register_root_hub(struct usb_hcd *hcd) dev_name(&usb_dev->dev), retval); return (retval < 0) ? retval : -EMSGSIZE; } - if (usb_dev->speed == USB_SPEED_SUPER) { + + if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) { retval = usb_get_bos_descriptor(usb_dev); - if (retval < 0) { + if (!retval) { + usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev); + } else if (usb_dev->speed == USB_SPEED_SUPER) { mutex_unlock(&usb_bus_list_lock); dev_dbg(parent_dev, "can't read %s bos descriptor %d\n", dev_name(&usb_dev->dev), retval); @@ -2691,7 +2694,8 @@ int usb_add_hcd(struct usb_hcd *hcd, if ((retval = usb_register_bus(&hcd->self)) < 0) goto err_register_bus; - if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) { + rhdev = usb_alloc_dev(NULL, &hcd->self, 0); + if (rhdev == NULL) { dev_err(hcd->self.controller, "unable to allocate root hub\n"); retval = -ENOMEM; goto err_allocate_root_hub; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d7c3d5a35946..73dfa194160b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -122,12 +122,12 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) return usb_get_intfdata(hdev->actconfig->interface[0]); } -static int usb_device_supports_lpm(struct usb_device *udev) +int usb_device_supports_lpm(struct usb_device *udev) { /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ - if (udev->speed == USB_SPEED_HIGH) { + if (udev->speed == USB_SPEED_HIGH || udev->speed == USB_SPEED_FULL) { if (udev->bos->ext_cap && (USB_LPM_SUPPORT & le32_to_cpu(udev->bos->ext_cap->bmAttributes))) @@ -795,7 +795,8 @@ int usb_hub_clear_tt_buffer(struct urb *urb) * since each TT has "at least two" buffers that can need it (and * there can be many TTs per hub). even if they're uncommon. */ - if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) { + clear = kmalloc(sizeof *clear, GFP_ATOMIC); + if (clear == NULL) { dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n"); /* FIXME recover somehow ... RESET_TT? */ return -ENOMEM; @@ -2350,6 +2351,26 @@ static void set_usb_port_removable(struct usb_device *udev) hub = usb_hub_to_struct_hub(udev->parent); + /* + * If the platform firmware has provided information about a port, + * use that to determine whether it's removable. + */ + switch (hub->ports[udev->portnum - 1]->connect_type) { + case USB_PORT_CONNECT_TYPE_HOT_PLUG: + udev->removable = USB_DEVICE_REMOVABLE; + return; + case USB_PORT_CONNECT_TYPE_HARD_WIRED: + case USB_PORT_NOT_USED: + udev->removable = USB_DEVICE_FIXED; + return; + default: + break; + } + + /* + * Otherwise, check whether the hub knows whether a port is removable + * or not + */ wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); if (!(wHubCharacteristics & HUB_CHAR_COMPOUND)) @@ -2369,21 +2390,6 @@ static void set_usb_port_removable(struct usb_device *udev) else udev->removable = USB_DEVICE_FIXED; - /* - * Platform firmware may have populated an alternative value for - * removable. If the parent port has a known connect_type use - * that instead. - */ - switch (hub->ports[udev->portnum - 1]->connect_type) { - case USB_PORT_CONNECT_TYPE_HOT_PLUG: - udev->removable = USB_DEVICE_REMOVABLE; - break; - case USB_PORT_CONNECT_TYPE_HARD_WIRED: - udev->removable = USB_DEVICE_FIXED; - break; - default: /* use what was set above */ - break; - } } /** @@ -2616,9 +2622,6 @@ static bool use_new_scheme(struct usb_device *udev, int retry) return USE_NEW_SCHEME(retry); } -static int hub_port_reset(struct usb_hub *hub, int port1, - struct usb_device *udev, unsigned int delay, bool warm); - /* Is a USB 3.0 port in the Inactive or Compliance Mode state? * Port worm reset is required to recover */ @@ -2706,44 +2709,6 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, return 0; } -static void hub_port_finish_reset(struct usb_hub *hub, int port1, - struct usb_device *udev, int *status) -{ - switch (*status) { - case 0: - /* TRSTRCY = 10 ms; plus some extra */ - msleep(10 + 40); - if (udev) { - struct usb_hcd *hcd = bus_to_hcd(udev->bus); - - update_devnum(udev, 0); - /* The xHC may think the device is already reset, - * so ignore the status. - */ - if (hcd->driver->reset_device) - hcd->driver->reset_device(hcd, udev); - } - /* FALL THROUGH */ - case -ENOTCONN: - case -ENODEV: - usb_clear_port_feature(hub->hdev, - port1, USB_PORT_FEAT_C_RESET); - if (hub_is_superspeed(hub->hdev)) { - usb_clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_BH_PORT_RESET); - usb_clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_PORT_LINK_STATE); - usb_clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_CONNECTION); - } - if (udev) - usb_set_device_state(udev, *status - ? USB_STATE_NOTATTACHED - : USB_STATE_DEFAULT); - break; - } -} - /* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */ static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay, bool warm) @@ -2767,13 +2732,10 @@ static int hub_port_reset(struct usb_hub *hub, int port1, * If the caller hasn't explicitly requested a warm reset, * double check and see if one is needed. */ - status = hub_port_status(hub, port1, - &portstatus, &portchange); - if (status < 0) - goto done; - - if (hub_port_warm_reset_required(hub, port1, portstatus)) - warm = true; + if (hub_port_status(hub, port1, &portstatus, &portchange) == 0) + if (hub_port_warm_reset_required(hub, port1, + portstatus)) + warm = true; } clear_bit(port1, hub->warm_reset_bits); @@ -2799,11 +2761,19 @@ static int hub_port_reset(struct usb_hub *hub, int port1, /* Check for disconnect or reset */ if (status == 0 || status == -ENOTCONN || status == -ENODEV) { - hub_port_finish_reset(hub, port1, udev, &status); + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_RESET); if (!hub_is_superspeed(hub->hdev)) goto done; + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + /* * If a USB 3.0 device migrates from reset to an error * state, re-issue the warm reset. @@ -2836,6 +2806,26 @@ static int hub_port_reset(struct usb_hub *hub, int port1, dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n"); done: + if (status == 0) { + /* TRSTRCY = 10 ms; plus some extra */ + msleep(10 + 40); + if (udev) { + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + update_devnum(udev, 0); + /* The xHC may think the device is already reset, + * so ignore the status. + */ + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); + + usb_set_device_state(udev, USB_STATE_DEFAULT); + } + } else { + if (udev) + usb_set_device_state(udev, USB_STATE_NOTATTACHED); + } + if (!hub_is_superspeed(hub->hdev)) up_read(&ehci_cf_port_reset_rwsem); @@ -3406,10 +3396,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) if (status) { dev_dbg(&port_dev->dev, "can't resume, status %d\n", status); } else { - /* drive resume for at least 20 msec */ + /* drive resume for USB_RESUME_TIMEOUT msec */ dev_dbg(&udev->dev, "usb %sresume\n", (PMSG_IS_AUTO(msg) ? "auto-" : "")); - msleep(25); + msleep(USB_RESUME_TIMEOUT); /* Virtual root hubs can trigger on GET_PORT_STATUS to * stop resume signaling. Then finish the resume diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 41e510ae8c83..d85abfed84cc 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -106,6 +106,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x010c), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x0125), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x016f), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index b1fb9aef0f5b..8d5b2f4113cd 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,6 +49,22 @@ const char *usbcore_name = "usbcore"; static bool nousb; /* Disable USB when built into kernel image */ +/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */ +#ifdef MODULE +module_param(nousb, bool, 0444); +#else +core_param(nousb, nousb, bool, 0444); +#endif + +/* + * for external read access to <nousb> + */ +int usb_disabled(void) +{ + return nousb; +} +EXPORT_SYMBOL_GPL(usb_disabled); + #ifdef CONFIG_PM static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ @@ -964,22 +980,6 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg); #endif -/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */ -#ifdef MODULE -module_param(nousb, bool, 0444); -#else -core_param(nousb, nousb, bool, 0444); -#endif - -/* - * for external read access to <nousb> - */ -int usb_disabled(void) -{ - return nousb; -} -EXPORT_SYMBOL_GPL(usb_disabled); - /* * Notifications of device and interface registration */ @@ -1045,7 +1045,7 @@ static void usb_debugfs_cleanup(void) static int __init usb_init(void) { int retval; - if (nousb) { + if (usb_disabled()) { pr_info("%s: USB support disabled\n", usbcore_name); return 0; } @@ -1102,7 +1102,7 @@ out: static void __exit usb_exit(void) { /* This will matter if shutdown/reboot does exitcalls. */ - if (nousb) + if (usb_disabled()) return; usb_deregister_device_driver(&usb_generic_driver); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 7eb1e26798e5..457255a3306a 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -65,6 +65,7 @@ extern int usb_hub_init(void); extern void usb_hub_cleanup(void); extern int usb_major_init(void); extern void usb_major_cleanup(void); +extern int usb_device_supports_lpm(struct usb_device *udev); #ifdef CONFIG_PM diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index 76b9ba4dc925..fd95ba6ec317 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -50,20 +50,14 @@ config USB_DWC2_DUAL_ROLE option requires USB_GADGET to be enabled. endchoice -config USB_DWC2_PLATFORM - tristate "DWC2 Platform" - default USB_DWC2_HOST || USB_DWC2_PERIPHERAL - help - The Designware USB2.0 platform interface module for - controllers directly connected to the CPU. - config USB_DWC2_PCI tristate "DWC2 PCI" - depends on USB_DWC2_HOST && PCI - default USB_DWC2_HOST + depends on PCI + default n + select NOP_USB_XCEIV help The Designware USB2.0 PCI interface module for controllers - connected to a PCI bus. This is only used for host mode. + connected to a PCI bus. config USB_DWC2_DEBUG bool "Enable Debugging Messages" diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index 8f752679752a..50fdaace1e73 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -2,7 +2,7 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG obj-$(CONFIG_USB_DWC2) += dwc2.o -dwc2-y := core.o core_intr.o +dwc2-y := core.o core_intr.o platform.o ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),) dwc2-y += hcd.o hcd_intr.o @@ -13,16 +13,15 @@ ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),) dwc2-y += gadget.o endif +ifneq ($(CONFIG_DEBUG_FS),) + dwc2-y += debugfs.o +endif + # NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to # this location and renamed gadget.c. When building for dynamically linked # modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role # mode. The PCI bus interface module will called dwc2_pci.ko and the platform # interface module will be called dwc2_platform.ko. -ifneq ($(CONFIG_USB_DWC2_PCI),) - obj-$(CONFIG_USB_DWC2) += dwc2_pci.o - dwc2_pci-y := pci.o -endif - -obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o -dwc2_platform-y := platform.o +obj-$(CONFIG_USB_DWC2_PCI) += dwc2_pci.o +dwc2_pci-y := pci.o diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index d5197d492e21..c3cc1a78d1e2 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -56,6 +56,364 @@ #include "core.h" #include "hcd.h" +#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +/** + * dwc2_backup_host_registers() - Backup controller host registers. + * When suspending usb bus, registers needs to be backuped + * if controller power is disabled once suspended. + * + * @hsotg: Programming view of the DWC_otg controller + */ +static int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hregs_backup *hr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Backup Host regs */ + hr = &hsotg->hr_backup; + hr->hcfg = readl(hsotg->regs + HCFG); + hr->haintmsk = readl(hsotg->regs + HAINTMSK); + for (i = 0; i < hsotg->core_params->host_channels; ++i) + hr->hcintmsk[i] = readl(hsotg->regs + HCINTMSK(i)); + + hr->hprt0 = readl(hsotg->regs + HPRT0); + hr->hfir = readl(hsotg->regs + HFIR); + hr->valid = true; + + return 0; +} + +/** + * dwc2_restore_host_registers() - Restore controller host registers. + * When resuming usb bus, device registers needs to be restored + * if controller power were disabled. + * + * @hsotg: Programming view of the DWC_otg controller + */ +static int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hregs_backup *hr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Restore host regs */ + hr = &hsotg->hr_backup; + if (!hr->valid) { + dev_err(hsotg->dev, "%s: no host registers to restore\n", + __func__); + return -EINVAL; + } + hr->valid = false; + + writel(hr->hcfg, hsotg->regs + HCFG); + writel(hr->haintmsk, hsotg->regs + HAINTMSK); + + for (i = 0; i < hsotg->core_params->host_channels; ++i) + writel(hr->hcintmsk[i], hsotg->regs + HCINTMSK(i)); + + writel(hr->hprt0, hsotg->regs + HPRT0); + writel(hr->hfir, hsotg->regs + HFIR); + + return 0; +} +#else +static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) +{ return 0; } + +static inline int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) +{ return 0; } +#endif + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +/** + * dwc2_backup_device_registers() - Backup controller device registers. + * When suspending usb bus, registers needs to be backuped + * if controller power is disabled once suspended. + * + * @hsotg: Programming view of the DWC_otg controller + */ +static int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_dregs_backup *dr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Backup dev regs */ + dr = &hsotg->dr_backup; + + dr->dcfg = readl(hsotg->regs + DCFG); + dr->dctl = readl(hsotg->regs + DCTL); + dr->daintmsk = readl(hsotg->regs + DAINTMSK); + dr->diepmsk = readl(hsotg->regs + DIEPMSK); + dr->doepmsk = readl(hsotg->regs + DOEPMSK); + + for (i = 0; i < hsotg->num_of_eps; i++) { + /* Backup IN EPs */ + dr->diepctl[i] = readl(hsotg->regs + DIEPCTL(i)); + + /* Ensure DATA PID is correctly configured */ + if (dr->diepctl[i] & DXEPCTL_DPID) + dr->diepctl[i] |= DXEPCTL_SETD1PID; + else + dr->diepctl[i] |= DXEPCTL_SETD0PID; + + dr->dieptsiz[i] = readl(hsotg->regs + DIEPTSIZ(i)); + dr->diepdma[i] = readl(hsotg->regs + DIEPDMA(i)); + + /* Backup OUT EPs */ + dr->doepctl[i] = readl(hsotg->regs + DOEPCTL(i)); + + /* Ensure DATA PID is correctly configured */ + if (dr->doepctl[i] & DXEPCTL_DPID) + dr->doepctl[i] |= DXEPCTL_SETD1PID; + else + dr->doepctl[i] |= DXEPCTL_SETD0PID; + + dr->doeptsiz[i] = readl(hsotg->regs + DOEPTSIZ(i)); + dr->doepdma[i] = readl(hsotg->regs + DOEPDMA(i)); + } + dr->valid = true; + return 0; +} + +/** + * dwc2_restore_device_registers() - Restore controller device registers. + * When resuming usb bus, device registers needs to be restored + * if controller power were disabled. + * + * @hsotg: Programming view of the DWC_otg controller + */ +static int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_dregs_backup *dr; + u32 dctl; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Restore dev regs */ + dr = &hsotg->dr_backup; + if (!dr->valid) { + dev_err(hsotg->dev, "%s: no device registers to restore\n", + __func__); + return -EINVAL; + } + dr->valid = false; + + writel(dr->dcfg, hsotg->regs + DCFG); + writel(dr->dctl, hsotg->regs + DCTL); + writel(dr->daintmsk, hsotg->regs + DAINTMSK); + writel(dr->diepmsk, hsotg->regs + DIEPMSK); + writel(dr->doepmsk, hsotg->regs + DOEPMSK); + + for (i = 0; i < hsotg->num_of_eps; i++) { + /* Restore IN EPs */ + writel(dr->diepctl[i], hsotg->regs + DIEPCTL(i)); + writel(dr->dieptsiz[i], hsotg->regs + DIEPTSIZ(i)); + writel(dr->diepdma[i], hsotg->regs + DIEPDMA(i)); + + /* Restore OUT EPs */ + writel(dr->doepctl[i], hsotg->regs + DOEPCTL(i)); + writel(dr->doeptsiz[i], hsotg->regs + DOEPTSIZ(i)); + writel(dr->doepdma[i], hsotg->regs + DOEPDMA(i)); + } + + /* Set the Power-On Programming done bit */ + dctl = readl(hsotg->regs + DCTL); + dctl |= DCTL_PWRONPRGDONE; + writel(dctl, hsotg->regs + DCTL); + + return 0; +} +#else +static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg) +{ return 0; } + +static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg) +{ return 0; } +#endif + +/** + * dwc2_backup_global_registers() - Backup global controller registers. + * When suspending usb bus, registers needs to be backuped + * if controller power is disabled once suspended. + * + * @hsotg: Programming view of the DWC_otg controller + */ +static int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_gregs_backup *gr; + int i; + + /* Backup global regs */ + gr = &hsotg->gr_backup; + + gr->gotgctl = readl(hsotg->regs + GOTGCTL); + gr->gintmsk = readl(hsotg->regs + GINTMSK); + gr->gahbcfg = readl(hsotg->regs + GAHBCFG); + gr->gusbcfg = readl(hsotg->regs + GUSBCFG); + gr->grxfsiz = readl(hsotg->regs + GRXFSIZ); + gr->gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ); + gr->hptxfsiz = readl(hsotg->regs + HPTXFSIZ); + gr->gdfifocfg = readl(hsotg->regs + GDFIFOCFG); + for (i = 0; i < MAX_EPS_CHANNELS; i++) + gr->dtxfsiz[i] = readl(hsotg->regs + DPTXFSIZN(i)); + + gr->valid = true; + return 0; +} + +/** + * dwc2_restore_global_registers() - Restore controller global registers. + * When resuming usb bus, device registers needs to be restored + * if controller power were disabled. + * + * @hsotg: Programming view of the DWC_otg controller + */ +static int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_gregs_backup *gr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Restore global regs */ + gr = &hsotg->gr_backup; + if (!gr->valid) { + dev_err(hsotg->dev, "%s: no global registers to restore\n", + __func__); + return -EINVAL; + } + gr->valid = false; + + writel(0xffffffff, hsotg->regs + GINTSTS); + writel(gr->gotgctl, hsotg->regs + GOTGCTL); + writel(gr->gintmsk, hsotg->regs + GINTMSK); + writel(gr->gusbcfg, hsotg->regs + GUSBCFG); + writel(gr->gahbcfg, hsotg->regs + GAHBCFG); + writel(gr->grxfsiz, hsotg->regs + GRXFSIZ); + writel(gr->gnptxfsiz, hsotg->regs + GNPTXFSIZ); + writel(gr->hptxfsiz, hsotg->regs + HPTXFSIZ); + writel(gr->gdfifocfg, hsotg->regs + GDFIFOCFG); + for (i = 0; i < MAX_EPS_CHANNELS; i++) + writel(gr->dtxfsiz[i], hsotg->regs + DPTXFSIZN(i)); + + return 0; +} + +/** + * dwc2_exit_hibernation() - Exit controller from Partial Power Down. + * + * @hsotg: Programming view of the DWC_otg controller + * @restore: Controller registers need to be restored + */ +int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore) +{ + u32 pcgcctl; + int ret = 0; + + if (!hsotg->core_params->hibernation) + return -ENOTSUPP; + + pcgcctl = readl(hsotg->regs + PCGCTL); + pcgcctl &= ~PCGCTL_STOPPCLK; + writel(pcgcctl, hsotg->regs + PCGCTL); + + pcgcctl = readl(hsotg->regs + PCGCTL); + pcgcctl &= ~PCGCTL_PWRCLMP; + writel(pcgcctl, hsotg->regs + PCGCTL); + + pcgcctl = readl(hsotg->regs + PCGCTL); + pcgcctl &= ~PCGCTL_RSTPDWNMODULE; + writel(pcgcctl, hsotg->regs + PCGCTL); + + udelay(100); + if (restore) { + ret = dwc2_restore_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore registers\n", + __func__); + return ret; + } + if (dwc2_is_host_mode(hsotg)) { + ret = dwc2_restore_host_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore host registers\n", + __func__); + return ret; + } + } else { + ret = dwc2_restore_device_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore device registers\n", + __func__); + return ret; + } + } + } + + return ret; +} + +/** + * dwc2_enter_hibernation() - Put controller in Partial Power Down. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg) +{ + u32 pcgcctl; + int ret = 0; + + if (!hsotg->core_params->hibernation) + return -ENOTSUPP; + + /* Backup all registers */ + ret = dwc2_backup_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup global registers\n", + __func__); + return ret; + } + + if (dwc2_is_host_mode(hsotg)) { + ret = dwc2_backup_host_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup host registers\n", + __func__); + return ret; + } + } else { + ret = dwc2_backup_device_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup device registers\n", + __func__); + return ret; + } + } + + /* Put the controller in low power state */ + pcgcctl = readl(hsotg->regs + PCGCTL); + + pcgcctl |= PCGCTL_PWRCLMP; + writel(pcgcctl, hsotg->regs + PCGCTL); + ndelay(20); + + pcgcctl |= PCGCTL_RSTPDWNMODULE; + writel(pcgcctl, hsotg->regs + PCGCTL); + ndelay(20); + + pcgcctl |= PCGCTL_STOPPCLK; + writel(pcgcctl, hsotg->regs + PCGCTL); + + return ret; +} + /** * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, * used in both device and host modes @@ -77,8 +435,10 @@ static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) if (hsotg->core_params->dma_enable <= 0) intmsk |= GINTSTS_RXFLVL; + if (hsotg->core_params->external_id_pin_ctl <= 0) + intmsk |= GINTSTS_CONIDSTSCHNG; - intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP | + intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP | GINTSTS_SESSREQINT; writel(intmsk, hsotg->regs + GINTMSK); @@ -2602,6 +2962,40 @@ static void dwc2_set_param_uframe_sched(struct dwc2_hsotg *hsotg, int val) hsotg->core_params->uframe_sched = val; } +static void dwc2_set_param_external_id_pin_ctl(struct dwc2_hsotg *hsotg, + int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter external_id_pin_ctl\n", + val); + dev_err(hsotg->dev, "external_id_pin_ctl must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting external_id_pin_ctl to %d\n", val); + } + + hsotg->core_params->external_id_pin_ctl = val; +} + +static void dwc2_set_param_hibernation(struct dwc2_hsotg *hsotg, + int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter hibernation\n", + val); + dev_err(hsotg->dev, "hibernation must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting hibernation to %d\n", val); + } + + hsotg->core_params->hibernation = val; +} + /* * This function is called during module intialization to pass module parameters * for the DWC_otg core. @@ -2646,6 +3040,8 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg, dwc2_set_param_ahbcfg(hsotg, params->ahbcfg); dwc2_set_param_otg_ver(hsotg, params->otg_ver); dwc2_set_param_uframe_sched(hsotg, params->uframe_sched); + dwc2_set_param_external_id_pin_ctl(hsotg, params->external_id_pin_ctl); + dwc2_set_param_hibernation(hsotg, params->hibernation); } /** @@ -2814,6 +3210,22 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) return 0; } +/* + * Sets all parameters to the given value. + * + * Assumes that the dwc2_core_params struct contains only integers. + */ +void dwc2_set_all_params(struct dwc2_core_params *params, int value) +{ + int *p = (int *)params; + size_t size = sizeof(*params) / sizeof(*p); + int i; + + for (i = 0; i < size; i++) + p[i] = value; +} + + u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg) { return hsotg->core_params->otg_ver == 1 ? 0x0200 : 0x0103; diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index f74304b12652..0ed87620941b 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -331,6 +331,17 @@ enum dwc2_ep0_state { * by the driver and are ignored in this * configuration value. * @uframe_sched: True to enable the microframe scheduler + * @external_id_pin_ctl: Specifies whether ID pin is handled externally. + * Disable CONIDSTSCHNG controller interrupt in such + * case. + * 0 - No (default) + * 1 - Yes + * @hibernation: Specifies whether the controller support hibernation. + * If hibernation is enabled, the controller will enter + * hibernation in both peripheral and host mode when + * needed. + * 0 - No (default) + * 1 - Yes * * The following parameters may be specified when starting the module. These * parameters define how the DWC_otg controller should be configured. A @@ -368,6 +379,8 @@ struct dwc2_core_params { int reload_ctl; int ahbcfg; int uframe_sched; + int external_id_pin_ctl; + int hibernation; }; /** @@ -452,6 +465,85 @@ struct dwc2_hw_params { #define DWC2_CTRL_BUFF_SIZE 8 /** + * struct dwc2_gregs_backup - Holds global registers state before entering partial + * power down + * @gotgctl: Backup of GOTGCTL register + * @gintmsk: Backup of GINTMSK register + * @gahbcfg: Backup of GAHBCFG register + * @gusbcfg: Backup of GUSBCFG register + * @grxfsiz: Backup of GRXFSIZ register + * @gnptxfsiz: Backup of GNPTXFSIZ register + * @gi2cctl: Backup of GI2CCTL register + * @hptxfsiz: Backup of HPTXFSIZ register + * @gdfifocfg: Backup of GDFIFOCFG register + * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint + * @gpwrdn: Backup of GPWRDN register + */ +struct dwc2_gregs_backup { + u32 gotgctl; + u32 gintmsk; + u32 gahbcfg; + u32 gusbcfg; + u32 grxfsiz; + u32 gnptxfsiz; + u32 gi2cctl; + u32 hptxfsiz; + u32 pcgcctl; + u32 gdfifocfg; + u32 dtxfsiz[MAX_EPS_CHANNELS]; + u32 gpwrdn; + bool valid; +}; + +/** + * struct dwc2_dregs_backup - Holds device registers state before entering partial + * power down + * @dcfg: Backup of DCFG register + * @dctl: Backup of DCTL register + * @daintmsk: Backup of DAINTMSK register + * @diepmsk: Backup of DIEPMSK register + * @doepmsk: Backup of DOEPMSK register + * @diepctl: Backup of DIEPCTL register + * @dieptsiz: Backup of DIEPTSIZ register + * @diepdma: Backup of DIEPDMA register + * @doepctl: Backup of DOEPCTL register + * @doeptsiz: Backup of DOEPTSIZ register + * @doepdma: Backup of DOEPDMA register + */ +struct dwc2_dregs_backup { + u32 dcfg; + u32 dctl; + u32 daintmsk; + u32 diepmsk; + u32 doepmsk; + u32 diepctl[MAX_EPS_CHANNELS]; + u32 dieptsiz[MAX_EPS_CHANNELS]; + u32 diepdma[MAX_EPS_CHANNELS]; + u32 doepctl[MAX_EPS_CHANNELS]; + u32 doeptsiz[MAX_EPS_CHANNELS]; + u32 doepdma[MAX_EPS_CHANNELS]; + bool valid; +}; + +/** + * struct dwc2_hregs_backup - Holds host registers state before entering partial + * power down + * @hcfg: Backup of HCFG register + * @haintmsk: Backup of HAINTMSK register + * @hcintmsk: Backup of HCINTMSK register + * @hptr0: Backup of HPTR0 register + * @hfir: Backup of HFIR register + */ +struct dwc2_hregs_backup { + u32 hcfg; + u32 haintmsk; + u32 hcintmsk[MAX_EPS_CHANNELS]; + u32 hprt0; + u32 hfir; + bool valid; +}; + +/** * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic * and periodic schedules * @@ -481,6 +573,9 @@ struct dwc2_hw_params { * interrupt * @wkp_timer: Timer object for handling Wakeup Detected interrupt * @lx_state: Lx state of connected device + * @gregs_backup: Backup of global registers during suspend + * @dregs_backup: Backup of device registers during suspend + * @hregs_backup: Backup of host registers during suspend * * These are for host mode: * @@ -593,6 +688,8 @@ struct dwc2_hsotg { struct dwc2_core_params *core_params; enum usb_otg_state op_state; enum usb_dr_mode dr_mode; + unsigned int hcd_enabled:1; + unsigned int gadget_enabled:1; struct phy *phy; struct usb_phy *uphy; @@ -611,11 +708,12 @@ struct dwc2_hsotg { struct work_struct wf_otg; struct timer_list wkp_timer; enum dwc2_lx_state lx_state; + struct dwc2_gregs_backup gr_backup; + struct dwc2_dregs_backup dr_backup; + struct dwc2_hregs_backup hr_backup; struct dentry *debug_root; - struct dentry *debug_file; - struct dentry *debug_testmode; - struct dentry *debug_fifo; + struct debugfs_regset32 *regset; /* DWC OTG HW Release versions */ #define DWC2_CORE_REV_2_71a 0x4f54271a @@ -749,6 +847,8 @@ enum dwc2_halt_status { * and the DWC_otg controller */ extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg); +extern int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg); +extern int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore); /* * Host core Functions. @@ -981,6 +1081,15 @@ extern void dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val); extern void dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val); +extern void dwc2_set_parameters(struct dwc2_hsotg *hsotg, + const struct dwc2_core_params *params); + +extern void dwc2_set_all_params(struct dwc2_core_params *params, int value); + +extern int dwc2_get_hwparams(struct dwc2_hsotg *hsotg); + + + /* * Dump core registers and SPRAM */ @@ -1003,6 +1112,8 @@ extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, bool reset); extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg); extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2); +extern int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode); +#define dwc2_is_device_connected(hsotg) (hsotg->connected) #else static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2) { return 0; } @@ -1016,6 +1127,10 @@ static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, bool reset) {} static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {} static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {} +static inline int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, + int testmode) +{ return 0; } +#define dwc2_is_device_connected(hsotg) (0) #endif #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) @@ -1023,14 +1138,12 @@ extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg); extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg); extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg); #else -static inline void dwc2_set_all_params(struct dwc2_core_params *params, int value) {} static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) { return 0; } static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {} static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {} static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {} -static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, - const struct dwc2_core_params *params) +static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq) { return 0; } #endif diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 6cf047878dba..927be1e8b3dc 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -334,6 +334,7 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) { + int ret; dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); @@ -345,6 +346,11 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) /* Clear Remote Wakeup Signaling */ dctl &= ~DCTL_RMTWKUPSIG; writel(dctl, hsotg->regs + DCTL); + ret = dwc2_exit_hibernation(hsotg, true); + if (ret && (ret != -ENOTSUPP)) + dev_err(hsotg->dev, "exit hibernation failed\n"); + + call_gadget(hsotg, resume); } /* Change to L0 state */ hsotg->lx_state = DWC2_L0; @@ -397,6 +403,7 @@ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) { u32 dsts; + int ret; dev_dbg(hsotg->dev, "USB SUSPEND\n"); @@ -411,10 +418,43 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n", !!(dsts & DSTS_SUSPSTS), hsotg->hw_params.power_optimized); + if ((dsts & DSTS_SUSPSTS) && hsotg->hw_params.power_optimized) { + /* Ignore suspend request before enumeration */ + if (!dwc2_is_device_connected(hsotg)) { + dev_dbg(hsotg->dev, + "ignore suspend request before enumeration\n"); + goto clear_int; + } + + ret = dwc2_enter_hibernation(hsotg); + if (ret) { + if (ret != -ENOTSUPP) + dev_err(hsotg->dev, + "enter hibernation failed\n"); + goto skip_power_saving; + } + + udelay(100); + + /* Ask phy to be suspended */ + if (!IS_ERR_OR_NULL(hsotg->uphy)) + usb_phy_set_suspend(hsotg->uphy, true); +skip_power_saving: + /* + * Change to L2 (suspend) state before releasing + * spinlock + */ + hsotg->lx_state = DWC2_L2; + + /* Call gadget suspend callback */ + call_gadget(hsotg, suspend); + } } else { if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); + /* Change to L2 (suspend) state */ + hsotg->lx_state = DWC2_L2; /* Clear the a_peripheral flag, back to a_host */ spin_unlock(&hsotg->lock); dwc2_hcd_start(hsotg); @@ -423,9 +463,7 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) } } - /* Change to L2 (suspend) state */ - hsotg->lx_state = DWC2_L2; - +clear_int: /* Clear interrupt */ writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); } @@ -522,4 +560,3 @@ out: spin_unlock(&hsotg->lock); return retval; } -EXPORT_SYMBOL_GPL(dwc2_handle_common_intr); diff --git a/drivers/usb/dwc2/debug.h b/drivers/usb/dwc2/debug.h new file mode 100644 index 000000000000..12dbd1daec87 --- /dev/null +++ b/drivers/usb/dwc2/debug.h @@ -0,0 +1,27 @@ +/** + * debug.h - Designware USB2 DRD controller debug header + * + * Copyright (C) 2015 Intel Corporation + * Mian Yousaf Kaukab <yousaf.kaukab@intel.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "core.h" + +#ifdef CONFIG_DEBUG_FS +extern int dwc2_debugfs_init(struct dwc2_hsotg *); +extern void dwc2_debugfs_exit(struct dwc2_hsotg *); +#else +static inline int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg) +{ } +#endif diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c new file mode 100644 index 000000000000..ef2ee3d9a25d --- /dev/null +++ b/drivers/usb/dwc2/debugfs.c @@ -0,0 +1,771 @@ +/** + * debugfs.c - Designware USB2 DRD controller debugfs + * + * Copyright (C) 2015 Intel Corporation + * Mian Yousaf Kaukab <yousaf.kaukab@intel.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/spinlock.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> + +#include "core.h" +#include "debug.h" + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +/** + * testmode_write - debugfs: change usb test mode + * @seq: The seq file to write to. + * @v: Unused parameter. + * + * This debugfs entry modify the current usb test mode. + */ +static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t + count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct dwc2_hsotg *hsotg = s->private; + unsigned long flags; + u32 testmode = 0; + char buf[32]; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (!strncmp(buf, "test_j", 6)) + testmode = TEST_J; + else if (!strncmp(buf, "test_k", 6)) + testmode = TEST_K; + else if (!strncmp(buf, "test_se0_nak", 12)) + testmode = TEST_SE0_NAK; + else if (!strncmp(buf, "test_packet", 11)) + testmode = TEST_PACKET; + else if (!strncmp(buf, "test_force_enable", 17)) + testmode = TEST_FORCE_EN; + else + testmode = 0; + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_set_test_mode(hsotg, testmode); + spin_unlock_irqrestore(&hsotg->lock, flags); + return count; +} + +/** + * testmode_show - debugfs: show usb test mode state + * @seq: The seq file to write to. + * @v: Unused parameter. + * + * This debugfs entry shows which usb test mode is currently enabled. + */ +static int testmode_show(struct seq_file *s, void *unused) +{ + struct dwc2_hsotg *hsotg = s->private; + unsigned long flags; + int dctl; + + spin_lock_irqsave(&hsotg->lock, flags); + dctl = readl(hsotg->regs + DCTL); + dctl &= DCTL_TSTCTL_MASK; + dctl >>= DCTL_TSTCTL_SHIFT; + spin_unlock_irqrestore(&hsotg->lock, flags); + + switch (dctl) { + case 0: + seq_puts(s, "no test\n"); + break; + case TEST_J: + seq_puts(s, "test_j\n"); + break; + case TEST_K: + seq_puts(s, "test_k\n"); + break; + case TEST_SE0_NAK: + seq_puts(s, "test_se0_nak\n"); + break; + case TEST_PACKET: + seq_puts(s, "test_packet\n"); + break; + case TEST_FORCE_EN: + seq_puts(s, "test_force_enable\n"); + break; + default: + seq_printf(s, "UNKNOWN %d\n", dctl); + } + + return 0; +} + +static int testmode_open(struct inode *inode, struct file *file) +{ + return single_open(file, testmode_show, inode->i_private); +} + +static const struct file_operations testmode_fops = { + .owner = THIS_MODULE, + .open = testmode_open, + .write = testmode_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * state_show - debugfs: show overall driver and device state. + * @seq: The seq file to write to. + * @v: Unused parameter. + * + * This debugfs entry shows the overall state of the hardware and + * some general information about each of the endpoints available + * to the system. + */ +static int state_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + void __iomem *regs = hsotg->regs; + int idx; + + seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", + readl(regs + DCFG), + readl(regs + DCTL), + readl(regs + DSTS)); + + seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", + readl(regs + DIEPMSK), readl(regs + DOEPMSK)); + + seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", + readl(regs + GINTMSK), + readl(regs + GINTSTS)); + + seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", + readl(regs + DAINTMSK), + readl(regs + DAINT)); + + seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", + readl(regs + GNPTXSTS), + readl(regs + GRXSTSR)); + + seq_puts(seq, "\nEndpoint status:\n"); + + for (idx = 0; idx < hsotg->num_of_eps; idx++) { + u32 in, out; + + in = readl(regs + DIEPCTL(idx)); + out = readl(regs + DOEPCTL(idx)); + + seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", + idx, in, out); + + in = readl(regs + DIEPTSIZ(idx)); + out = readl(regs + DOEPTSIZ(idx)); + + seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", + in, out); + + seq_puts(seq, "\n"); + } + + return 0; +} + +static int state_open(struct inode *inode, struct file *file) +{ + return single_open(file, state_show, inode->i_private); +} + +static const struct file_operations state_fops = { + .owner = THIS_MODULE, + .open = state_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * fifo_show - debugfs: show the fifo information + * @seq: The seq_file to write data to. + * @v: Unused parameter. + * + * Show the FIFO information for the overall fifo and all the + * periodic transmission FIFOs. + */ +static int fifo_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + void __iomem *regs = hsotg->regs; + u32 val; + int idx; + + seq_puts(seq, "Non-periodic FIFOs:\n"); + seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); + + val = readl(regs + GNPTXFSIZ); + seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_DEPTH_MASK); + + seq_puts(seq, "\nPeriodic TXFIFOs:\n"); + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { + val = readl(regs + DPTXFSIZN(idx)); + + seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); + } + + return 0; +} + +static int fifo_open(struct inode *inode, struct file *file) +{ + return single_open(file, fifo_show, inode->i_private); +} + +static const struct file_operations fifo_fops = { + .owner = THIS_MODULE, + .open = fifo_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const char *decode_direction(int is_in) +{ + return is_in ? "in" : "out"; +} + +/** + * ep_show - debugfs: show the state of an endpoint. + * @seq: The seq_file to write data to. + * @v: Unused parameter. + * + * This debugfs entry shows the state of the given endpoint (one is + * registered for each available). + */ +static int ep_show(struct seq_file *seq, void *v) +{ + struct s3c_hsotg_ep *ep = seq->private; + struct dwc2_hsotg *hsotg = ep->parent; + struct s3c_hsotg_req *req; + void __iomem *regs = hsotg->regs; + int index = ep->index; + int show_limit = 15; + unsigned long flags; + + seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n", + ep->index, ep->ep.name, decode_direction(ep->dir_in)); + + /* first show the register state */ + + seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", + readl(regs + DIEPCTL(index)), + readl(regs + DOEPCTL(index))); + + seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", + readl(regs + DIEPDMA(index)), + readl(regs + DOEPDMA(index))); + + seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", + readl(regs + DIEPINT(index)), + readl(regs + DOEPINT(index))); + + seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", + readl(regs + DIEPTSIZ(index)), + readl(regs + DOEPTSIZ(index))); + + seq_puts(seq, "\n"); + seq_printf(seq, "mps %d\n", ep->ep.maxpacket); + seq_printf(seq, "total_data=%ld\n", ep->total_data); + + seq_printf(seq, "request list (%p,%p):\n", + ep->queue.next, ep->queue.prev); + + spin_lock_irqsave(&hsotg->lock, flags); + + list_for_each_entry(req, &ep->queue, queue) { + if (--show_limit < 0) { + seq_puts(seq, "not showing more requests...\n"); + break; + } + + seq_printf(seq, "%c req %p: %d bytes @%p, ", + req == ep->req ? '*' : ' ', + req, req->req.length, req->req.buf); + seq_printf(seq, "%d done, res %d\n", + req->req.actual, req->req.status); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} + +static int ep_open(struct inode *inode, struct file *file) +{ + return single_open(file, ep_show, inode->i_private); +} + +static const struct file_operations ep_fops = { + .owner = THIS_MODULE, + .open = ep_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * s3c_hsotg_create_debug - create debugfs directory and files + * @hsotg: The driver state + * + * Create the debugfs files to allow the user to get information + * about the state of the system. The directory name is created + * with the same name as the device itself, in case we end up + * with multiple blocks in future systems. + */ +static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) +{ + struct dentry *root; + struct dentry *file; + unsigned epidx; + + root = hsotg->debug_root; + + /* create general state file */ + + file = debugfs_create_file("state", S_IRUGO, root, hsotg, &state_fops); + if (IS_ERR(file)) + dev_err(hsotg->dev, "%s: failed to create state\n", __func__); + + file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, hsotg, + &testmode_fops); + if (IS_ERR(file)) + dev_err(hsotg->dev, "%s: failed to create testmode\n", + __func__); + + file = debugfs_create_file("fifo", S_IRUGO, root, hsotg, &fifo_fops); + if (IS_ERR(file)) + dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__); + + /* Create one file for each out endpoint */ + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { + struct s3c_hsotg_ep *ep; + + ep = hsotg->eps_out[epidx]; + if (ep) { + file = debugfs_create_file(ep->name, S_IRUGO, + root, ep, &ep_fops); + if (IS_ERR(file)) + dev_err(hsotg->dev, "failed to create %s debug file\n", + ep->name); + } + } + /* Create one file for each in endpoint. EP0 is handled with out eps */ + for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) { + struct s3c_hsotg_ep *ep; + + ep = hsotg->eps_in[epidx]; + if (ep) { + file = debugfs_create_file(ep->name, S_IRUGO, + root, ep, &ep_fops); + if (IS_ERR(file)) + dev_err(hsotg->dev, "failed to create %s debug file\n", + ep->name); + } + } +} +#else +static inline void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) {} +#endif + +/* s3c_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */ + +#define dump_register(nm) \ +{ \ + .name = #nm, \ + .offset = nm, \ +} + +static const struct debugfs_reg32 dwc2_regs[] = { + /* + * Accessing registers like this can trigger mode mismatch interrupt. + * However, according to dwc2 databook, the register access, in this + * case, is completed on the processor bus but is ignored by the core + * and does not affect its operation. + */ + dump_register(GOTGCTL), + dump_register(GOTGINT), + dump_register(GAHBCFG), + dump_register(GUSBCFG), + dump_register(GRSTCTL), + dump_register(GINTSTS), + dump_register(GINTMSK), + dump_register(GRXSTSR), + dump_register(GRXSTSP), + dump_register(GRXFSIZ), + dump_register(GNPTXFSIZ), + dump_register(GNPTXSTS), + dump_register(GI2CCTL), + dump_register(GPVNDCTL), + dump_register(GGPIO), + dump_register(GUID), + dump_register(GSNPSID), + dump_register(GHWCFG1), + dump_register(GHWCFG2), + dump_register(GHWCFG3), + dump_register(GHWCFG4), + dump_register(GLPMCFG), + dump_register(GPWRDN), + dump_register(GDFIFOCFG), + dump_register(ADPCTL), + dump_register(HPTXFSIZ), + dump_register(DPTXFSIZN(1)), + dump_register(DPTXFSIZN(2)), + dump_register(DPTXFSIZN(3)), + dump_register(DPTXFSIZN(4)), + dump_register(DPTXFSIZN(5)), + dump_register(DPTXFSIZN(6)), + dump_register(DPTXFSIZN(7)), + dump_register(DPTXFSIZN(8)), + dump_register(DPTXFSIZN(9)), + dump_register(DPTXFSIZN(10)), + dump_register(DPTXFSIZN(11)), + dump_register(DPTXFSIZN(12)), + dump_register(DPTXFSIZN(13)), + dump_register(DPTXFSIZN(14)), + dump_register(DPTXFSIZN(15)), + dump_register(DCFG), + dump_register(DCTL), + dump_register(DSTS), + dump_register(DIEPMSK), + dump_register(DOEPMSK), + dump_register(DAINT), + dump_register(DAINTMSK), + dump_register(DTKNQR1), + dump_register(DTKNQR2), + dump_register(DTKNQR3), + dump_register(DTKNQR4), + dump_register(DVBUSDIS), + dump_register(DVBUSPULSE), + dump_register(DIEPCTL(0)), + dump_register(DIEPCTL(1)), + dump_register(DIEPCTL(2)), + dump_register(DIEPCTL(3)), + dump_register(DIEPCTL(4)), + dump_register(DIEPCTL(5)), + dump_register(DIEPCTL(6)), + dump_register(DIEPCTL(7)), + dump_register(DIEPCTL(8)), + dump_register(DIEPCTL(9)), + dump_register(DIEPCTL(10)), + dump_register(DIEPCTL(11)), + dump_register(DIEPCTL(12)), + dump_register(DIEPCTL(13)), + dump_register(DIEPCTL(14)), + dump_register(DIEPCTL(15)), + dump_register(DOEPCTL(0)), + dump_register(DOEPCTL(1)), + dump_register(DOEPCTL(2)), + dump_register(DOEPCTL(3)), + dump_register(DOEPCTL(4)), + dump_register(DOEPCTL(5)), + dump_register(DOEPCTL(6)), + dump_register(DOEPCTL(7)), + dump_register(DOEPCTL(8)), + dump_register(DOEPCTL(9)), + dump_register(DOEPCTL(10)), + dump_register(DOEPCTL(11)), + dump_register(DOEPCTL(12)), + dump_register(DOEPCTL(13)), + dump_register(DOEPCTL(14)), + dump_register(DOEPCTL(15)), + dump_register(DIEPINT(0)), + dump_register(DIEPINT(1)), + dump_register(DIEPINT(2)), + dump_register(DIEPINT(3)), + dump_register(DIEPINT(4)), + dump_register(DIEPINT(5)), + dump_register(DIEPINT(6)), + dump_register(DIEPINT(7)), + dump_register(DIEPINT(8)), + dump_register(DIEPINT(9)), + dump_register(DIEPINT(10)), + dump_register(DIEPINT(11)), + dump_register(DIEPINT(12)), + dump_register(DIEPINT(13)), + dump_register(DIEPINT(14)), + dump_register(DIEPINT(15)), + dump_register(DOEPINT(0)), + dump_register(DOEPINT(1)), + dump_register(DOEPINT(2)), + dump_register(DOEPINT(3)), + dump_register(DOEPINT(4)), + dump_register(DOEPINT(5)), + dump_register(DOEPINT(6)), + dump_register(DOEPINT(7)), + dump_register(DOEPINT(8)), + dump_register(DOEPINT(9)), + dump_register(DOEPINT(10)), + dump_register(DOEPINT(11)), + dump_register(DOEPINT(12)), + dump_register(DOEPINT(13)), + dump_register(DOEPINT(14)), + dump_register(DOEPINT(15)), + dump_register(DIEPTSIZ(0)), + dump_register(DIEPTSIZ(1)), + dump_register(DIEPTSIZ(2)), + dump_register(DIEPTSIZ(3)), + dump_register(DIEPTSIZ(4)), + dump_register(DIEPTSIZ(5)), + dump_register(DIEPTSIZ(6)), + dump_register(DIEPTSIZ(7)), + dump_register(DIEPTSIZ(8)), + dump_register(DIEPTSIZ(9)), + dump_register(DIEPTSIZ(10)), + dump_register(DIEPTSIZ(11)), + dump_register(DIEPTSIZ(12)), + dump_register(DIEPTSIZ(13)), + dump_register(DIEPTSIZ(14)), + dump_register(DIEPTSIZ(15)), + dump_register(DOEPTSIZ(0)), + dump_register(DOEPTSIZ(1)), + dump_register(DOEPTSIZ(2)), + dump_register(DOEPTSIZ(3)), + dump_register(DOEPTSIZ(4)), + dump_register(DOEPTSIZ(5)), + dump_register(DOEPTSIZ(6)), + dump_register(DOEPTSIZ(7)), + dump_register(DOEPTSIZ(8)), + dump_register(DOEPTSIZ(9)), + dump_register(DOEPTSIZ(10)), + dump_register(DOEPTSIZ(11)), + dump_register(DOEPTSIZ(12)), + dump_register(DOEPTSIZ(13)), + dump_register(DOEPTSIZ(14)), + dump_register(DOEPTSIZ(15)), + dump_register(DIEPDMA(0)), + dump_register(DIEPDMA(1)), + dump_register(DIEPDMA(2)), + dump_register(DIEPDMA(3)), + dump_register(DIEPDMA(4)), + dump_register(DIEPDMA(5)), + dump_register(DIEPDMA(6)), + dump_register(DIEPDMA(7)), + dump_register(DIEPDMA(8)), + dump_register(DIEPDMA(9)), + dump_register(DIEPDMA(10)), + dump_register(DIEPDMA(11)), + dump_register(DIEPDMA(12)), + dump_register(DIEPDMA(13)), + dump_register(DIEPDMA(14)), + dump_register(DIEPDMA(15)), + dump_register(DOEPDMA(0)), + dump_register(DOEPDMA(1)), + dump_register(DOEPDMA(2)), + dump_register(DOEPDMA(3)), + dump_register(DOEPDMA(4)), + dump_register(DOEPDMA(5)), + dump_register(DOEPDMA(6)), + dump_register(DOEPDMA(7)), + dump_register(DOEPDMA(8)), + dump_register(DOEPDMA(9)), + dump_register(DOEPDMA(10)), + dump_register(DOEPDMA(11)), + dump_register(DOEPDMA(12)), + dump_register(DOEPDMA(13)), + dump_register(DOEPDMA(14)), + dump_register(DOEPDMA(15)), + dump_register(DTXFSTS(0)), + dump_register(DTXFSTS(1)), + dump_register(DTXFSTS(2)), + dump_register(DTXFSTS(3)), + dump_register(DTXFSTS(4)), + dump_register(DTXFSTS(5)), + dump_register(DTXFSTS(6)), + dump_register(DTXFSTS(7)), + dump_register(DTXFSTS(8)), + dump_register(DTXFSTS(9)), + dump_register(DTXFSTS(10)), + dump_register(DTXFSTS(11)), + dump_register(DTXFSTS(12)), + dump_register(DTXFSTS(13)), + dump_register(DTXFSTS(14)), + dump_register(DTXFSTS(15)), + dump_register(PCGCTL), + dump_register(HCFG), + dump_register(HFIR), + dump_register(HFNUM), + dump_register(HPTXSTS), + dump_register(HAINT), + dump_register(HAINTMSK), + dump_register(HFLBADDR), + dump_register(HPRT0), + dump_register(HCCHAR(0)), + dump_register(HCCHAR(1)), + dump_register(HCCHAR(2)), + dump_register(HCCHAR(3)), + dump_register(HCCHAR(4)), + dump_register(HCCHAR(5)), + dump_register(HCCHAR(6)), + dump_register(HCCHAR(7)), + dump_register(HCCHAR(8)), + dump_register(HCCHAR(9)), + dump_register(HCCHAR(10)), + dump_register(HCCHAR(11)), + dump_register(HCCHAR(12)), + dump_register(HCCHAR(13)), + dump_register(HCCHAR(14)), + dump_register(HCCHAR(15)), + dump_register(HCSPLT(0)), + dump_register(HCSPLT(1)), + dump_register(HCSPLT(2)), + dump_register(HCSPLT(3)), + dump_register(HCSPLT(4)), + dump_register(HCSPLT(5)), + dump_register(HCSPLT(6)), + dump_register(HCSPLT(7)), + dump_register(HCSPLT(8)), + dump_register(HCSPLT(9)), + dump_register(HCSPLT(10)), + dump_register(HCSPLT(11)), + dump_register(HCSPLT(12)), + dump_register(HCSPLT(13)), + dump_register(HCSPLT(14)), + dump_register(HCSPLT(15)), + dump_register(HCINT(0)), + dump_register(HCINT(1)), + dump_register(HCINT(2)), + dump_register(HCINT(3)), + dump_register(HCINT(4)), + dump_register(HCINT(5)), + dump_register(HCINT(6)), + dump_register(HCINT(7)), + dump_register(HCINT(8)), + dump_register(HCINT(9)), + dump_register(HCINT(10)), + dump_register(HCINT(11)), + dump_register(HCINT(12)), + dump_register(HCINT(13)), + dump_register(HCINT(14)), + dump_register(HCINT(15)), + dump_register(HCINTMSK(0)), + dump_register(HCINTMSK(1)), + dump_register(HCINTMSK(2)), + dump_register(HCINTMSK(3)), + dump_register(HCINTMSK(4)), + dump_register(HCINTMSK(5)), + dump_register(HCINTMSK(6)), + dump_register(HCINTMSK(7)), + dump_register(HCINTMSK(8)), + dump_register(HCINTMSK(9)), + dump_register(HCINTMSK(10)), + dump_register(HCINTMSK(11)), + dump_register(HCINTMSK(12)), + dump_register(HCINTMSK(13)), + dump_register(HCINTMSK(14)), + dump_register(HCINTMSK(15)), + dump_register(HCTSIZ(0)), + dump_register(HCTSIZ(1)), + dump_register(HCTSIZ(2)), + dump_register(HCTSIZ(3)), + dump_register(HCTSIZ(4)), + dump_register(HCTSIZ(5)), + dump_register(HCTSIZ(6)), + dump_register(HCTSIZ(7)), + dump_register(HCTSIZ(8)), + dump_register(HCTSIZ(9)), + dump_register(HCTSIZ(10)), + dump_register(HCTSIZ(11)), + dump_register(HCTSIZ(12)), + dump_register(HCTSIZ(13)), + dump_register(HCTSIZ(14)), + dump_register(HCTSIZ(15)), + dump_register(HCDMA(0)), + dump_register(HCDMA(1)), + dump_register(HCDMA(2)), + dump_register(HCDMA(3)), + dump_register(HCDMA(4)), + dump_register(HCDMA(5)), + dump_register(HCDMA(6)), + dump_register(HCDMA(7)), + dump_register(HCDMA(8)), + dump_register(HCDMA(9)), + dump_register(HCDMA(10)), + dump_register(HCDMA(11)), + dump_register(HCDMA(12)), + dump_register(HCDMA(13)), + dump_register(HCDMA(14)), + dump_register(HCDMA(15)), + dump_register(HCDMAB(0)), + dump_register(HCDMAB(1)), + dump_register(HCDMAB(2)), + dump_register(HCDMAB(3)), + dump_register(HCDMAB(4)), + dump_register(HCDMAB(5)), + dump_register(HCDMAB(6)), + dump_register(HCDMAB(7)), + dump_register(HCDMAB(8)), + dump_register(HCDMAB(9)), + dump_register(HCDMAB(10)), + dump_register(HCDMAB(11)), + dump_register(HCDMAB(12)), + dump_register(HCDMAB(13)), + dump_register(HCDMAB(14)), + dump_register(HCDMAB(15)), +}; + +int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) +{ + int ret; + struct dentry *file; + + hsotg->debug_root = debugfs_create_dir(dev_name(hsotg->dev), NULL); + if (!hsotg->debug_root) { + ret = -ENOMEM; + goto err0; + } + + /* Add gadget debugfs nodes */ + s3c_hsotg_create_debug(hsotg); + + hsotg->regset = devm_kzalloc(hsotg->dev, sizeof(*hsotg->regset), + GFP_KERNEL); + if (!hsotg->regset) { + ret = -ENOMEM; + goto err1; + } + + hsotg->regset->regs = dwc2_regs; + hsotg->regset->nregs = ARRAY_SIZE(dwc2_regs); + hsotg->regset->base = hsotg->regs; + + file = debugfs_create_regset32("regdump", S_IRUGO, hsotg->debug_root, + hsotg->regset); + if (!file) { + ret = -ENOMEM; + goto err1; + } + + return 0; +err1: + debugfs_remove_recursive(hsotg->debug_root); +err0: + return ret; +} + +void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg) +{ + debugfs_remove_recursive(hsotg->debug_root); + hsotg->debug_root = NULL; +} diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 6a30887082cd..4d47b7c09238 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -20,7 +20,6 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/debugfs.h> #include <linux/mutex.h> #include <linux/seq_file.h> #include <linux/delay.h> @@ -35,7 +34,6 @@ #include <linux/usb/gadget.h> #include <linux/usb/phy.h> #include <linux/platform_data/s3c-hsotg.h> -#include <linux/uaccess.h> #include "core.h" #include "hw.h" @@ -792,6 +790,13 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, ep->name, req, req->length, req->buf, req->no_interrupt, req->zero, req->short_not_ok); + /* Prevent new request submission when controller is suspended */ + if (hs->lx_state == DWC2_L2) { + dev_dbg(hs->dev, "%s: don't submit request while suspended\n", + __func__); + return -EAGAIN; + } + /* initialise status of the request */ INIT_LIST_HEAD(&hs_req->queue); req->actual = 0; @@ -894,7 +899,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg, * @testmode: requested usb test mode * Enable usb Test Mode requested by the Host. */ -static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode) +int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode) { int dctl = readl(hsotg->regs + DCTL); @@ -2185,7 +2190,6 @@ void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg) call_gadget(hsotg, disconnect); } -EXPORT_SYMBOL_GPL(s3c_hsotg_disconnect); /** * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler @@ -2310,8 +2314,9 @@ void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT | GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF | GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST | - GINTSTS_ENUMDONE | GINTSTS_OTGINT | - GINTSTS_USBSUSP | GINTSTS_WKUPINT, + GINTSTS_RESETDET | GINTSTS_ENUMDONE | + GINTSTS_OTGINT | GINTSTS_USBSUSP | + GINTSTS_WKUPINT, hsotg->regs + GINTMSK); if (using_dma(hsotg)) @@ -2477,7 +2482,19 @@ irq_retry: } } - if (gintsts & GINTSTS_USBRST) { + if (gintsts & GINTSTS_RESETDET) { + dev_dbg(hsotg->dev, "%s: USBRstDet\n", __func__); + + writel(GINTSTS_RESETDET, hsotg->regs + GINTSTS); + + /* This event must be used only if controller is suspended */ + if (hsotg->lx_state == DWC2_L2) { + dwc2_exit_hibernation(hsotg, true); + hsotg->lx_state = DWC2_L0; + } + } + + if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) { u32 usb_status = readl(hsotg->regs + GOTGCTL); @@ -2497,6 +2514,7 @@ irq_retry: kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET); + hsotg->lx_state = DWC2_L0; s3c_hsotg_core_init_disconnected(hsotg, true); } } @@ -2745,7 +2763,7 @@ error: * s3c_hsotg_ep_disable - disable given endpoint * @ep: The endpoint to disable. */ -static int s3c_hsotg_ep_disable_force(struct usb_ep *ep, bool force) +static int s3c_hsotg_ep_disable(struct usb_ep *ep) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); struct dwc2_hsotg *hsotg = hs_ep->parent; @@ -2788,10 +2806,6 @@ static int s3c_hsotg_ep_disable_force(struct usb_ep *ep, bool force) return 0; } -static int s3c_hsotg_ep_disable(struct usb_ep *ep) -{ - return s3c_hsotg_ep_disable_force(ep, false); -} /** * on_list - check request is on the given endpoint * @ep: The endpoint to check. @@ -3187,6 +3201,14 @@ static int s3c_hsotg_vbus_session(struct usb_gadget *gadget, int is_active) spin_lock_irqsave(&hsotg->lock, flags); if (is_active) { + /* + * If controller is hibernated, it must exit from hibernation + * before being initialized + */ + if (hsotg->lx_state == DWC2_L2) { + dwc2_exit_hibernation(hsotg, false); + hsotg->lx_state = DWC2_L0; + } /* Kill any ep0 requests as controller will be reinitialized */ kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET); s3c_hsotg_core_init_disconnected(hsotg, false); @@ -3391,404 +3413,6 @@ static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg) #endif } -/** - * testmode_write - debugfs: change usb test mode - * @seq: The seq file to write to. - * @v: Unused parameter. - * - * This debugfs entry modify the current usb test mode. - */ -static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t - count, loff_t *ppos) -{ - struct seq_file *s = file->private_data; - struct dwc2_hsotg *hsotg = s->private; - unsigned long flags; - u32 testmode = 0; - char buf[32]; - - if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) - return -EFAULT; - - if (!strncmp(buf, "test_j", 6)) - testmode = TEST_J; - else if (!strncmp(buf, "test_k", 6)) - testmode = TEST_K; - else if (!strncmp(buf, "test_se0_nak", 12)) - testmode = TEST_SE0_NAK; - else if (!strncmp(buf, "test_packet", 11)) - testmode = TEST_PACKET; - else if (!strncmp(buf, "test_force_enable", 17)) - testmode = TEST_FORCE_EN; - else - testmode = 0; - - spin_lock_irqsave(&hsotg->lock, flags); - s3c_hsotg_set_test_mode(hsotg, testmode); - spin_unlock_irqrestore(&hsotg->lock, flags); - return count; -} - -/** - * testmode_show - debugfs: show usb test mode state - * @seq: The seq file to write to. - * @v: Unused parameter. - * - * This debugfs entry shows which usb test mode is currently enabled. - */ -static int testmode_show(struct seq_file *s, void *unused) -{ - struct dwc2_hsotg *hsotg = s->private; - unsigned long flags; - int dctl; - - spin_lock_irqsave(&hsotg->lock, flags); - dctl = readl(hsotg->regs + DCTL); - dctl &= DCTL_TSTCTL_MASK; - dctl >>= DCTL_TSTCTL_SHIFT; - spin_unlock_irqrestore(&hsotg->lock, flags); - - switch (dctl) { - case 0: - seq_puts(s, "no test\n"); - break; - case TEST_J: - seq_puts(s, "test_j\n"); - break; - case TEST_K: - seq_puts(s, "test_k\n"); - break; - case TEST_SE0_NAK: - seq_puts(s, "test_se0_nak\n"); - break; - case TEST_PACKET: - seq_puts(s, "test_packet\n"); - break; - case TEST_FORCE_EN: - seq_puts(s, "test_force_enable\n"); - break; - default: - seq_printf(s, "UNKNOWN %d\n", dctl); - } - - return 0; -} - -static int testmode_open(struct inode *inode, struct file *file) -{ - return single_open(file, testmode_show, inode->i_private); -} - -static const struct file_operations testmode_fops = { - .owner = THIS_MODULE, - .open = testmode_open, - .write = testmode_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/** - * state_show - debugfs: show overall driver and device state. - * @seq: The seq file to write to. - * @v: Unused parameter. - * - * This debugfs entry shows the overall state of the hardware and - * some general information about each of the endpoints available - * to the system. - */ -static int state_show(struct seq_file *seq, void *v) -{ - struct dwc2_hsotg *hsotg = seq->private; - void __iomem *regs = hsotg->regs; - int idx; - - seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", - readl(regs + DCFG), - readl(regs + DCTL), - readl(regs + DSTS)); - - seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", - readl(regs + DIEPMSK), readl(regs + DOEPMSK)); - - seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", - readl(regs + GINTMSK), - readl(regs + GINTSTS)); - - seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", - readl(regs + DAINTMSK), - readl(regs + DAINT)); - - seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", - readl(regs + GNPTXSTS), - readl(regs + GRXSTSR)); - - seq_puts(seq, "\nEndpoint status:\n"); - - for (idx = 0; idx < hsotg->num_of_eps; idx++) { - u32 in, out; - - in = readl(regs + DIEPCTL(idx)); - out = readl(regs + DOEPCTL(idx)); - - seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", - idx, in, out); - - in = readl(regs + DIEPTSIZ(idx)); - out = readl(regs + DOEPTSIZ(idx)); - - seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", - in, out); - - seq_puts(seq, "\n"); - } - - return 0; -} - -static int state_open(struct inode *inode, struct file *file) -{ - return single_open(file, state_show, inode->i_private); -} - -static const struct file_operations state_fops = { - .owner = THIS_MODULE, - .open = state_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/** - * fifo_show - debugfs: show the fifo information - * @seq: The seq_file to write data to. - * @v: Unused parameter. - * - * Show the FIFO information for the overall fifo and all the - * periodic transmission FIFOs. - */ -static int fifo_show(struct seq_file *seq, void *v) -{ - struct dwc2_hsotg *hsotg = seq->private; - void __iomem *regs = hsotg->regs; - u32 val; - int idx; - - seq_puts(seq, "Non-periodic FIFOs:\n"); - seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); - - val = readl(regs + GNPTXFSIZ); - seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", - val >> FIFOSIZE_DEPTH_SHIFT, - val & FIFOSIZE_DEPTH_MASK); - - seq_puts(seq, "\nPeriodic TXFIFOs:\n"); - - for (idx = 1; idx < hsotg->num_of_eps; idx++) { - val = readl(regs + DPTXFSIZN(idx)); - - seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, - val >> FIFOSIZE_DEPTH_SHIFT, - val & FIFOSIZE_STARTADDR_MASK); - } - - return 0; -} - -static int fifo_open(struct inode *inode, struct file *file) -{ - return single_open(file, fifo_show, inode->i_private); -} - -static const struct file_operations fifo_fops = { - .owner = THIS_MODULE, - .open = fifo_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - - -static const char *decode_direction(int is_in) -{ - return is_in ? "in" : "out"; -} - -/** - * ep_show - debugfs: show the state of an endpoint. - * @seq: The seq_file to write data to. - * @v: Unused parameter. - * - * This debugfs entry shows the state of the given endpoint (one is - * registered for each available). - */ -static int ep_show(struct seq_file *seq, void *v) -{ - struct s3c_hsotg_ep *ep = seq->private; - struct dwc2_hsotg *hsotg = ep->parent; - struct s3c_hsotg_req *req; - void __iomem *regs = hsotg->regs; - int index = ep->index; - int show_limit = 15; - unsigned long flags; - - seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n", - ep->index, ep->ep.name, decode_direction(ep->dir_in)); - - /* first show the register state */ - - seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", - readl(regs + DIEPCTL(index)), - readl(regs + DOEPCTL(index))); - - seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", - readl(regs + DIEPDMA(index)), - readl(regs + DOEPDMA(index))); - - seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", - readl(regs + DIEPINT(index)), - readl(regs + DOEPINT(index))); - - seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", - readl(regs + DIEPTSIZ(index)), - readl(regs + DOEPTSIZ(index))); - - seq_puts(seq, "\n"); - seq_printf(seq, "mps %d\n", ep->ep.maxpacket); - seq_printf(seq, "total_data=%ld\n", ep->total_data); - - seq_printf(seq, "request list (%p,%p):\n", - ep->queue.next, ep->queue.prev); - - spin_lock_irqsave(&hsotg->lock, flags); - - list_for_each_entry(req, &ep->queue, queue) { - if (--show_limit < 0) { - seq_puts(seq, "not showing more requests...\n"); - break; - } - - seq_printf(seq, "%c req %p: %d bytes @%p, ", - req == ep->req ? '*' : ' ', - req, req->req.length, req->req.buf); - seq_printf(seq, "%d done, res %d\n", - req->req.actual, req->req.status); - } - - spin_unlock_irqrestore(&hsotg->lock, flags); - - return 0; -} - -static int ep_open(struct inode *inode, struct file *file) -{ - return single_open(file, ep_show, inode->i_private); -} - -static const struct file_operations ep_fops = { - .owner = THIS_MODULE, - .open = ep_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/** - * s3c_hsotg_create_debug - create debugfs directory and files - * @hsotg: The driver state - * - * Create the debugfs files to allow the user to get information - * about the state of the system. The directory name is created - * with the same name as the device itself, in case we end up - * with multiple blocks in future systems. - */ -static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) -{ - struct dentry *root; - unsigned epidx; - - root = debugfs_create_dir(dev_name(hsotg->dev), NULL); - hsotg->debug_root = root; - if (IS_ERR(root)) { - dev_err(hsotg->dev, "cannot create debug root\n"); - return; - } - - /* create general state file */ - - hsotg->debug_file = debugfs_create_file("state", S_IRUGO, root, - hsotg, &state_fops); - - if (IS_ERR(hsotg->debug_file)) - dev_err(hsotg->dev, "%s: failed to create state\n", __func__); - - hsotg->debug_testmode = debugfs_create_file("testmode", - S_IRUGO | S_IWUSR, root, - hsotg, &testmode_fops); - - if (IS_ERR(hsotg->debug_testmode)) - dev_err(hsotg->dev, "%s: failed to create testmode\n", - __func__); - - hsotg->debug_fifo = debugfs_create_file("fifo", S_IRUGO, root, - hsotg, &fifo_fops); - - if (IS_ERR(hsotg->debug_fifo)) - dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__); - - /* Create one file for each out endpoint */ - for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { - struct s3c_hsotg_ep *ep; - - ep = hsotg->eps_out[epidx]; - if (ep) { - ep->debugfs = debugfs_create_file(ep->name, S_IRUGO, - root, ep, &ep_fops); - - if (IS_ERR(ep->debugfs)) - dev_err(hsotg->dev, "failed to create %s debug file\n", - ep->name); - } - } - /* Create one file for each in endpoint. EP0 is handled with out eps */ - for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) { - struct s3c_hsotg_ep *ep; - - ep = hsotg->eps_in[epidx]; - if (ep) { - ep->debugfs = debugfs_create_file(ep->name, S_IRUGO, - root, ep, &ep_fops); - - if (IS_ERR(ep->debugfs)) - dev_err(hsotg->dev, "failed to create %s debug file\n", - ep->name); - } - } -} - -/** - * s3c_hsotg_delete_debug - cleanup debugfs entries - * @hsotg: The driver state - * - * Cleanup (remove) the debugfs files for use on module exit. - */ -static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg) -{ - unsigned epidx; - - for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { - if (hsotg->eps_in[epidx]) - debugfs_remove(hsotg->eps_in[epidx]->debugfs); - if (hsotg->eps_out[epidx]) - debugfs_remove(hsotg->eps_out[epidx]->debugfs); - } - - debugfs_remove(hsotg->debug_file); - debugfs_remove(hsotg->debug_testmode); - debugfs_remove(hsotg->debug_fifo); - debugfs_remove(hsotg->debug_root); -} - #ifdef CONFIG_OF static void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg) { @@ -3896,6 +3520,8 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) hsotg->gadget.max_speed = USB_SPEED_HIGH; hsotg->gadget.ops = &s3c_hsotg_gadget_ops; hsotg->gadget.name = dev_name(dev); + if (hsotg->dr_mode == USB_DR_MODE_OTG) + hsotg->gadget.is_otg = 1; /* reset the system */ @@ -4028,8 +3654,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) if (ret) goto err_supplies; - s3c_hsotg_create_debug(hsotg); - s3c_hsotg_dump(hsotg); return 0; @@ -4041,7 +3665,6 @@ err_clk: return ret; } -EXPORT_SYMBOL_GPL(dwc2_gadget_init); /** * s3c_hsotg_remove - remove function for hsotg driver @@ -4050,18 +3673,19 @@ EXPORT_SYMBOL_GPL(dwc2_gadget_init); int s3c_hsotg_remove(struct dwc2_hsotg *hsotg) { usb_del_gadget_udc(&hsotg->gadget); - s3c_hsotg_delete_debug(hsotg); clk_disable_unprepare(hsotg->clk); return 0; } -EXPORT_SYMBOL_GPL(s3c_hsotg_remove); int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg) { unsigned long flags; int ret = 0; + if (hsotg->lx_state != DWC2_L0) + return ret; + mutex_lock(&hsotg->init_mutex); if (hsotg->driver) { @@ -4095,13 +3719,15 @@ int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg) return ret; } -EXPORT_SYMBOL_GPL(s3c_hsotg_suspend); int s3c_hsotg_resume(struct dwc2_hsotg *hsotg) { unsigned long flags; int ret = 0; + if (hsotg->lx_state == DWC2_L2) + return ret; + mutex_lock(&hsotg->init_mutex); if (hsotg->driver) { @@ -4124,4 +3750,3 @@ int s3c_hsotg_resume(struct dwc2_hsotg *hsotg) return ret; } -EXPORT_SYMBOL_GPL(s3c_hsotg_resume); diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index c78c8740db1d..f845c41fe9e5 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -257,6 +257,14 @@ static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) */ channel->qh = NULL; } + /* All channels have been freed, mark them available */ + if (hsotg->core_params->uframe_sched > 0) { + hsotg->available_host_channels = + hsotg->core_params->host_channels; + } else { + hsotg->non_periodic_channels = 0; + hsotg->periodic_channels = 0; + } } /** @@ -349,12 +357,11 @@ void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) writel(0, hsotg->regs + HPRT0); } +/* Caller must hold driver lock */ static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, - struct dwc2_hcd_urb *urb, void **ep_handle, - gfp_t mem_flags) + struct dwc2_hcd_urb *urb, struct dwc2_qh *qh, + struct dwc2_qtd *qtd) { - struct dwc2_qtd *qtd; - unsigned long flags; u32 intr_mask; int retval; int dev_speed; @@ -378,18 +385,15 @@ static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, return -ENODEV; } - qtd = kzalloc(sizeof(*qtd), mem_flags); if (!qtd) - return -ENOMEM; + return -EINVAL; dwc2_hcd_qtd_init(qtd, urb); - retval = dwc2_hcd_qtd_add(hsotg, qtd, (struct dwc2_qh **)ep_handle, - mem_flags); + retval = dwc2_hcd_qtd_add(hsotg, qtd, qh); if (retval) { dev_err(hsotg->dev, "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", retval); - kfree(qtd); return retval; } @@ -405,11 +409,9 @@ static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, */ return 0; - spin_lock_irqsave(&hsotg->lock, flags); tr_type = dwc2_hcd_select_transactions(hsotg); if (tr_type != DWC2_TRANSACTION_NONE) dwc2_hcd_queue_transactions(hsotg, tr_type); - spin_unlock_irqrestore(&hsotg->lock, flags); } return 0; @@ -713,9 +715,7 @@ static int dwc2_hc_setup_align_buf(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, /* 3072 = 3 max-size Isoc packets */ buf_size = 3072; - qh->dw_align_buf = dma_alloc_coherent(hsotg->dev, buf_size, - &qh->dw_align_buf_dma, - GFP_ATOMIC); + qh->dw_align_buf = kmalloc(buf_size, GFP_ATOMIC | GFP_DMA); if (!qh->dw_align_buf) return -ENOMEM; qh->dw_align_buf_size = buf_size; @@ -740,6 +740,15 @@ static int dwc2_hc_setup_align_buf(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, } } + qh->dw_align_buf_dma = dma_map_single(hsotg->dev, + qh->dw_align_buf, qh->dw_align_buf_size, + chan->ep_is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE); + if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { + dev_err(hsotg->dev, "can't map align_buf\n"); + chan->align_buf = 0; + return -EINVAL; + } + chan->align_buf = qh->dw_align_buf_dma; return 0; } @@ -1527,7 +1536,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, hprt0 |= HPRT0_RES; writel(hprt0, hsotg->regs + HPRT0); hprt0 &= ~HPRT0_SUSP; - usleep_range(100000, 150000); + msleep(USB_RESUME_TIMEOUT); hprt0 &= ~HPRT0_RES; writel(hprt0, hsotg->regs + HPRT0); @@ -1608,7 +1617,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, dev_dbg(hsotg->dev, "GetHubDescriptor\n"); hub_desc = (struct usb_hub_descriptor *)buf; hub_desc->bDescLength = 9; - hub_desc->bDescriptorType = 0x29; + hub_desc->bDescriptorType = USB_DT_HUB; hub_desc->bNbrPorts = 1; hub_desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_COMMON_LPSM | @@ -1766,6 +1775,15 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, /* Not supported */ break; + case USB_PORT_FEAT_TEST: + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_TEST\n"); + hprt0 &= ~HPRT0_TSTCTL_MASK; + hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT; + writel(hprt0, hsotg->regs + HPRT0); + break; + default: retval = -EINVAL; dev_err(hsotg->dev, @@ -2305,6 +2323,22 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd) usleep_range(1000, 3000); } +static int _dwc2_hcd_suspend(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + hsotg->lx_state = DWC2_L2; + return 0; +} + +static int _dwc2_hcd_resume(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + hsotg->lx_state = DWC2_L0; + return 0; +} + /* Returns the current frame number */ static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) { @@ -2407,6 +2441,9 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, u32 tflags = 0; void *buf; unsigned long flags; + struct dwc2_qh *qh; + bool qh_allocated = false; + struct dwc2_qtd *qtd; if (dbg_urb(urb)) { dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); @@ -2460,7 +2497,7 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, "%s: unaligned transfer with no transfer_buffer", __func__); retval = -EINVAL; - goto fail1; + goto fail0; } } @@ -2485,34 +2522,63 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, urb->iso_frame_desc[i].length); urb->hcpriv = dwc2_urb; + qh = (struct dwc2_qh *) ep->hcpriv; + /* Create QH for the endpoint if it doesn't exist */ + if (!qh) { + qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags); + if (!qh) { + retval = -ENOMEM; + goto fail0; + } + ep->hcpriv = qh; + qh_allocated = true; + } + + qtd = kzalloc(sizeof(*qtd), mem_flags); + if (!qtd) { + retval = -ENOMEM; + goto fail1; + } spin_lock_irqsave(&hsotg->lock, flags); retval = usb_hcd_link_urb_to_ep(hcd, urb); - spin_unlock_irqrestore(&hsotg->lock, flags); if (retval) - goto fail1; + goto fail2; - retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, &ep->hcpriv, mem_flags); + retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd); if (retval) - goto fail2; + goto fail3; if (alloc_bandwidth) { - spin_lock_irqsave(&hsotg->lock, flags); dwc2_allocate_bus_bandwidth(hcd, dwc2_hcd_get_ep_bandwidth(hsotg, ep), urb); - spin_unlock_irqrestore(&hsotg->lock, flags); } + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; -fail2: - spin_lock_irqsave(&hsotg->lock, flags); +fail3: dwc2_urb->priv = NULL; usb_hcd_unlink_urb_from_ep(hcd, urb); +fail2: spin_unlock_irqrestore(&hsotg->lock, flags); -fail1: urb->hcpriv = NULL; + kfree(qtd); +fail1: + if (qh_allocated) { + struct dwc2_qtd *qtd2, *qtd2_tmp; + + ep->hcpriv = NULL; + dwc2_hcd_qh_unlink(hsotg, qh); + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list, + qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh); + dwc2_hcd_qh_free(hsotg, qh); + } +fail0: kfree(dwc2_urb); return retval; @@ -2675,6 +2741,9 @@ static struct hc_driver dwc2_hc_driver = { .hub_status_data = _dwc2_hcd_hub_status_data, .hub_control = _dwc2_hcd_hub_control, .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, + + .bus_suspend = _dwc2_hcd_suspend, + .bus_resume = _dwc2_hcd_resume, }; /* @@ -2740,8 +2809,6 @@ static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) destroy_workqueue(hsotg->wq_otg); } - kfree(hsotg->core_params); - hsotg->core_params = NULL; del_timer(&hsotg->wkp_timer); } @@ -2754,29 +2821,12 @@ static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) } /* - * Sets all parameters to the given value. - * - * Assumes that the dwc2_core_params struct contains only integers. - */ -void dwc2_set_all_params(struct dwc2_core_params *params, int value) -{ - int *p = (int *)params; - size_t size = sizeof(*params) / sizeof(*p); - int i; - - for (i = 0; i < size; i++) - p[i] = value; -} -EXPORT_SYMBOL_GPL(dwc2_set_all_params); - -/* * Initializes the HCD. This function allocates memory for and initializes the * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the * USB bus with the core and calls the hc_driver->start() function. It returns * a negative error on failure. */ -int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, - const struct dwc2_core_params *params) +int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq) { struct usb_hcd *hcd; struct dwc2_host_chan *channel; @@ -2789,12 +2839,6 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); - /* Detect config values from hardware */ - retval = dwc2_get_hwparams(hsotg); - - if (retval) - return retval; - retval = -ENOMEM; hcfg = readl(hsotg->regs + HCFG); @@ -2813,15 +2857,6 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, hsotg->last_frame_num = HFNUM_MAX_FRNUM; #endif - hsotg->core_params = kzalloc(sizeof(*hsotg->core_params), GFP_KERNEL); - if (!hsotg->core_params) - goto error1; - - dwc2_set_all_params(hsotg->core_params, -1); - - /* Validate parameter values */ - dwc2_set_parameters(hsotg, params); - /* Check if the bus driver or platform code has setup a dma_mask */ if (hsotg->core_params->dma_enable > 0 && hsotg->dev->dma_mask == NULL) { @@ -2939,6 +2974,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, /* Don't support SG list at this point */ hcd->self.sg_tablesize = 0; + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_host(hsotg->uphy->otg, &hcd->self); + /* * Finish generic HCD initialization and start the HCD. This function * allocates the DMA buffer pool, registers the USB bus, requests the @@ -2971,7 +3009,6 @@ error1: dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); return retval; } -EXPORT_SYMBOL_GPL(dwc2_hcd_init); /* * Removes the HCD. @@ -2992,6 +3029,9 @@ void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) return; } + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_host(hsotg->uphy->otg, NULL); + usb_remove_hcd(hcd); hsotg->priv = NULL; dwc2_hcd_release(hsotg); @@ -3002,4 +3042,3 @@ void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) kfree(hsotg->frame_num_array); #endif } -EXPORT_SYMBOL_GPL(dwc2_hcd_remove); diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index e69a843d8928..fc1054965552 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -451,13 +451,8 @@ static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe) return !dwc2_hcd_is_pipe_in(pipe); } -extern int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, - const struct dwc2_core_params *params); +extern int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq); extern void dwc2_hcd_remove(struct dwc2_hsotg *hsotg); -extern void dwc2_set_parameters(struct dwc2_hsotg *hsotg, - const struct dwc2_core_params *params); -extern void dwc2_set_all_params(struct dwc2_core_params *params, int value); -extern int dwc2_get_hwparams(struct dwc2_hsotg *hsotg); /* Transaction Execution Functions */ extern enum dwc2_transaction_type dwc2_hcd_select_transactions( @@ -468,6 +463,9 @@ extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, /* Schedule Queue Functions */ /* Implemented in hcd_queue.c */ extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg); +extern struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, + gfp_t mem_flags); extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); @@ -476,7 +474,7 @@ extern void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, extern void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb); extern int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, - struct dwc2_qh **qh, gfp_t mem_flags); + struct dwc2_qh *qh); /* Unlinks and frees a QTD */ static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg, diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index 551ba878b003..4cc95df4262d 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -350,6 +350,9 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) dev_vdbg(hsotg->dev, "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n", hprt0); + if (hsotg->lx_state != DWC2_L0) + usb_hcd_resume_root_hub(hsotg->priv); + hsotg->flags.b.port_connect_status_change = 1; hsotg->flags.b.port_connect_status = 1; hprt0_modify |= HPRT0_CONNDET; @@ -463,10 +466,15 @@ static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg, } /* Non DWORD-aligned buffer case handling */ - if (chan->align_buf && xfer_length && chan->ep_is_in) { + if (chan->align_buf && xfer_length) { dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); - memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf, - xfer_length); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + chan->qh->dw_align_buf_size, + chan->ep_is_in ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + if (chan->ep_is_in) + memcpy(urb->buf + urb->actual_length, + chan->qh->dw_align_buf, xfer_length); } dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n", @@ -552,13 +560,18 @@ static enum dwc2_halt_status dwc2_update_isoc_urb_state( chan, chnum, qtd, halt_status, NULL); /* Non DWORD-aligned buffer case handling */ - if (chan->align_buf && frame_desc->actual_length && - chan->ep_is_in) { + if (chan->align_buf && frame_desc->actual_length) { dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); - memcpy(urb->buf + frame_desc->offset + - qtd->isoc_split_offset, chan->qh->dw_align_buf, - frame_desc->actual_length); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + chan->qh->dw_align_buf_size, + chan->ep_is_in ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + if (chan->ep_is_in) + memcpy(urb->buf + frame_desc->offset + + qtd->isoc_split_offset, + chan->qh->dw_align_buf, + frame_desc->actual_length); } break; case DWC2_HC_XFER_FRAME_OVERRUN: @@ -581,13 +594,18 @@ static enum dwc2_halt_status dwc2_update_isoc_urb_state( chan, chnum, qtd, halt_status, NULL); /* Non DWORD-aligned buffer case handling */ - if (chan->align_buf && frame_desc->actual_length && - chan->ep_is_in) { + if (chan->align_buf && frame_desc->actual_length) { dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); - memcpy(urb->buf + frame_desc->offset + - qtd->isoc_split_offset, chan->qh->dw_align_buf, - frame_desc->actual_length); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + chan->qh->dw_align_buf_size, + chan->ep_is_in ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + if (chan->ep_is_in) + memcpy(urb->buf + frame_desc->offset + + qtd->isoc_split_offset, + chan->qh->dw_align_buf, + frame_desc->actual_length); } /* Skip whole frame */ @@ -923,6 +941,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, if (chan->align_buf) { dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + chan->qh->dw_align_buf_size, DMA_FROM_DEVICE); memcpy(qtd->urb->buf + frame_desc->offset + qtd->isoc_split_offset, chan->qh->dw_align_buf, len); } @@ -1152,8 +1172,14 @@ static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg, /* Non DWORD-aligned buffer case handling */ if (chan->align_buf && xfer_length && chan->ep_is_in) { dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); - memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf, - xfer_length); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + chan->qh->dw_align_buf_size, + chan->ep_is_in ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + if (chan->ep_is_in) + memcpy(urb->buf + urb->actual_length, + chan->qh->dw_align_buf, + xfer_length); } urb->actual_length += xfer_length; @@ -1182,6 +1208,16 @@ static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, int chnum, struct dwc2_qtd *qtd) { + if (!qtd) { + dev_dbg(hsotg->dev, "%s: qtd is NULL\n", __func__); + return; + } + + if (!qtd->urb) { + dev_dbg(hsotg->dev, "%s: qtd->urb is NULL\n", __func__); + return; + } + if (dbg_hc(chan)) dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NAK Received--\n", chnum); diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index bb97838bc6c0..3ad63d392e13 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -191,7 +191,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, * * Return: Pointer to the newly allocated QH, or NULL on error */ -static struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, +struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, struct dwc2_hcd_urb *urb, gfp_t mem_flags) { @@ -229,11 +229,13 @@ static struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, */ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { - if (hsotg->core_params->dma_desc_enable > 0) + if (hsotg->core_params->dma_desc_enable > 0) { dwc2_hcd_qh_free_ddma(hsotg, qh); - else if (qh->dw_align_buf) - dma_free_coherent(hsotg->dev, qh->dw_align_buf_size, - qh->dw_align_buf, qh->dw_align_buf_dma); + } else { + /* kfree(NULL) is safe */ + kfree(qh->dw_align_buf); + qh->dw_align_buf_dma = (dma_addr_t)0; + } kfree(qh); } @@ -761,67 +763,36 @@ void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) /** * dwc2_hcd_qtd_add() - Adds a QTD to the QTD-list of a QH + * Caller must hold driver lock. * * @hsotg: The DWC HCD structure * @qtd: The QTD to add - * @qh: Out parameter to return queue head - * @atomic_alloc: Flag to do atomic alloc if needed + * @qh: Queue head to add qtd to * * Return: 0 if successful, negative error code otherwise * - * Finds the correct QH to place the QTD into. If it does not find a QH, it - * will create a new QH. If the QH to which the QTD is added is not currently - * scheduled, it is placed into the proper schedule based on its EP type. + * If the QH to which the QTD is added is not currently scheduled, it is placed + * into the proper schedule based on its EP type. */ int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, - struct dwc2_qh **qh, gfp_t mem_flags) + struct dwc2_qh *qh) { - struct dwc2_hcd_urb *urb = qtd->urb; - unsigned long flags; - int allocated = 0; int retval; - /* - * Get the QH which holds the QTD-list to insert to. Create QH if it - * doesn't exist. - */ - if (*qh == NULL) { - *qh = dwc2_hcd_qh_create(hsotg, urb, mem_flags); - if (*qh == NULL) - return -ENOMEM; - allocated = 1; + if (unlikely(!qh)) { + dev_err(hsotg->dev, "%s: Invalid QH\n", __func__); + retval = -EINVAL; + goto fail; } - spin_lock_irqsave(&hsotg->lock, flags); - - retval = dwc2_hcd_qh_add(hsotg, *qh); + retval = dwc2_hcd_qh_add(hsotg, qh); if (retval) goto fail; - qtd->qh = *qh; - list_add_tail(&qtd->qtd_list_entry, &(*qh)->qtd_list); - spin_unlock_irqrestore(&hsotg->lock, flags); + qtd->qh = qh; + list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list); return 0; - fail: - if (allocated) { - struct dwc2_qtd *qtd2, *qtd2_tmp; - struct dwc2_qh *qh_tmp = *qh; - - *qh = NULL; - dwc2_hcd_qh_unlink(hsotg, qh_tmp); - - /* Free each QTD in the QH's QTD list */ - list_for_each_entry_safe(qtd2, qtd2_tmp, &qh_tmp->qtd_list, - qtd_list_entry) - dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh_tmp); - - spin_unlock_irqrestore(&hsotg->lock, flags); - dwc2_hcd_qh_free(hsotg, qh_tmp); - } else { - spin_unlock_irqrestore(&hsotg->lock, flags); - } - return retval; } diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index a4e724b0a62e..ae419615a176 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -50,113 +50,97 @@ #include <linux/usb/hcd.h> #include <linux/usb/ch11.h> +#include <linux/platform_device.h> +#include <linux/usb/usb_phy_generic.h> -#include "core.h" -#include "hcd.h" - -#define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0 -static const char dwc2_driver_name[] = "dwc2"; - -static const struct dwc2_core_params dwc2_module_params = { - .otg_cap = -1, - .otg_ver = -1, - .dma_enable = -1, - .dma_desc_enable = 0, - .speed = -1, - .enable_dynamic_fifo = -1, - .en_multiple_tx_fifo = -1, - .host_rx_fifo_size = 1024, - .host_nperio_tx_fifo_size = 256, - .host_perio_tx_fifo_size = 1024, - .max_transfer_size = 65535, - .max_packet_count = 511, - .host_channels = -1, - .phy_type = -1, - .phy_utmi_width = -1, - .phy_ulpi_ddr = -1, - .phy_ulpi_ext_vbus = -1, - .i2c_enable = -1, - .ulpi_fs_ls = -1, - .host_support_fs_ls_low_power = -1, - .host_ls_low_power_phy_clk = -1, - .ts_dline = -1, - .reload_ctl = -1, - .ahbcfg = -1, - .uframe_sched = -1, +static const char dwc2_driver_name[] = "dwc2-pci"; + +struct dwc2_pci_glue { + struct platform_device *dwc2; + struct platform_device *phy; }; -/** - * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the - * DWC_otg driver - * - * @dev: Bus device - * - * This routine is called, for example, when the rmmod command is executed. The - * device may or may not be electrically present. If it is present, the driver - * stops device processing. Any resources used on behalf of this device are - * freed. - */ -static void dwc2_driver_remove(struct pci_dev *dev) +static void dwc2_pci_remove(struct pci_dev *pci) { - struct dwc2_hsotg *hsotg = pci_get_drvdata(dev); + struct dwc2_pci_glue *glue = pci_get_drvdata(pci); - dwc2_hcd_remove(hsotg); - pci_disable_device(dev); + platform_device_unregister(glue->dwc2); + usb_phy_generic_unregister(glue->phy); + kfree(glue); + pci_set_drvdata(pci, NULL); } -/** - * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg - * driver - * - * @dev: Bus device - * - * This routine creates the driver components required to control the device - * (core, HCD, and PCD) and initializes the device. The driver components are - * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved - * in the device private data. This allows the driver to access the dwc2_hsotg - * structure on subsequent calls to driver methods for this device. - */ -static int dwc2_driver_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int dwc2_pci_probe(struct pci_dev *pci, + const struct pci_device_id *id) { - struct dwc2_hsotg *hsotg; - int retval; + struct resource res[2]; + struct platform_device *dwc2; + struct platform_device *phy; + int ret; + struct device *dev = &pci->dev; + struct dwc2_pci_glue *glue; + + ret = pcim_enable_device(pci); + if (ret) { + dev_err(dev, "failed to enable pci device\n"); + return -ENODEV; + } + + pci_set_master(pci); - hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); - if (!hsotg) + dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO); + if (!dwc2) { + dev_err(dev, "couldn't allocate dwc2 device\n"); return -ENOMEM; + } - hsotg->dev = &dev->dev; - hsotg->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]); - if (IS_ERR(hsotg->regs)) - return PTR_ERR(hsotg->regs); + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); - dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", - (unsigned long)pci_resource_start(dev, 0), hsotg->regs); + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = "dwc2"; + res[0].flags = IORESOURCE_MEM; - if (pci_enable_device(dev) < 0) - return -ENODEV; + res[1].start = pci->irq; + res[1].name = "dwc2"; + res[1].flags = IORESOURCE_IRQ; - pci_set_master(dev); + ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(dev, "couldn't add resources to dwc2 device\n"); + return ret; + } - retval = devm_request_irq(hsotg->dev, dev->irq, - dwc2_handle_common_intr, IRQF_SHARED, - dev_name(hsotg->dev), hsotg); - if (retval) - return retval; + dwc2->dev.parent = dev; - spin_lock_init(&hsotg->lock); - retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params); - if (retval) { - pci_disable_device(dev); - return retval; + phy = usb_phy_generic_register(); + if (IS_ERR(phy)) { + dev_err(dev, "error registering generic PHY (%ld)\n", + PTR_ERR(phy)); + return PTR_ERR(phy); } - pci_set_drvdata(dev, hsotg); + ret = platform_device_add(dwc2); + if (ret) { + dev_err(dev, "failed to register dwc2 device\n"); + goto err; + } + + glue = kzalloc(sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->phy = phy; + glue->dwc2 = dwc2; + pci_set_drvdata(pci, glue); - return retval; + return 0; +err: + usb_phy_generic_unregister(phy); + platform_device_put(dwc2); + return ret; } static const struct pci_device_id dwc2_pci_ids[] = { @@ -174,8 +158,8 @@ MODULE_DEVICE_TABLE(pci, dwc2_pci_ids); static struct pci_driver dwc2_pci_driver = { .name = dwc2_driver_name, .id_table = dwc2_pci_ids, - .probe = dwc2_driver_probe, - .remove = dwc2_driver_remove, + .probe = dwc2_pci_probe, + .remove = dwc2_pci_remove, }; module_pci_driver(dwc2_pci_driver); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index ae095f009b4f..90935304185a 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -47,6 +47,7 @@ #include "core.h" #include "hcd.h" +#include "debug.h" static const char dwc2_driver_name[] = "dwc2"; @@ -76,6 +77,8 @@ static const struct dwc2_core_params params_bcm2835 = { .reload_ctl = 0, .ahbcfg = 0x10, .uframe_sched = 0, + .external_id_pin_ctl = -1, + .hibernation = -1, }; static const struct dwc2_core_params params_rk3066 = { @@ -104,6 +107,8 @@ static const struct dwc2_core_params params_rk3066 = { .reload_ctl = -1, .ahbcfg = 0x7, /* INCR16 */ .uframe_sched = -1, + .external_id_pin_ctl = -1, + .hibernation = -1, }; /** @@ -121,8 +126,11 @@ static int dwc2_driver_remove(struct platform_device *dev) { struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); - dwc2_hcd_remove(hsotg); - s3c_hsotg_remove(hsotg); + dwc2_debugfs_exit(hsotg); + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); + if (hsotg->gadget_enabled) + s3c_hsotg_remove(hsotg); return 0; } @@ -234,15 +242,43 @@ static int dwc2_driver_probe(struct platform_device *dev) spin_lock_init(&hsotg->lock); mutex_init(&hsotg->init_mutex); - retval = dwc2_gadget_init(hsotg, irq); - if (retval) - return retval; - retval = dwc2_hcd_init(hsotg, irq, params); + + /* Detect config values from hardware */ + retval = dwc2_get_hwparams(hsotg); if (retval) return retval; + hsotg->core_params = devm_kzalloc(&dev->dev, + sizeof(*hsotg->core_params), GFP_KERNEL); + if (!hsotg->core_params) + return -ENOMEM; + + dwc2_set_all_params(hsotg->core_params, -1); + + /* Validate parameter values */ + dwc2_set_parameters(hsotg, params); + + if (hsotg->dr_mode != USB_DR_MODE_HOST) { + retval = dwc2_gadget_init(hsotg, irq); + if (retval) + return retval; + hsotg->gadget_enabled = 1; + } + + if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { + retval = dwc2_hcd_init(hsotg, irq); + if (retval) { + if (hsotg->gadget_enabled) + s3c_hsotg_remove(hsotg); + return retval; + } + hsotg->hcd_enabled = 1; + } + platform_set_drvdata(dev, hsotg); + dwc2_debugfs_init(hsotg); + return retval; } diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index edbf9c85af7e..dede32e809b6 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -11,6 +11,13 @@ config USB_DWC3 if USB_DWC3 +config USB_DWC3_ULPI + bool "Register ULPI PHY Interface" + depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3 + help + Select this if you have ULPI type PHY attached to your DWC3 + controller. + choice bool "DWC3 Mode Selection" default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET) @@ -104,11 +111,4 @@ config USB_DWC3_DEBUG help Say Y here to enable debugging messages on DWC3 Driver. -config DWC3_HOST_USB3_LPM_ENABLE - bool "Enable USB3 LPM Capability" - depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y - default n - help - Select this when you want to enable USB3 LPM with dwc3 xhci host. - endif diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 46172f47f02d..c7076e37c4ed 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -15,6 +15,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),) dwc3-y += gadget.o ep0.o endif +ifneq ($(CONFIG_USB_DWC3_ULPI),) + dwc3-y += ulpi.o +endif + ifneq ($(CONFIG_DEBUG_FS),) dwc3-y += debugfs.o endif diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 9f0e209b8f6c..ff5773c66b84 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -117,6 +117,33 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) } /** + * dwc3_soft_reset - Issue soft reset + * @dwc: Pointer to our controller context structure + */ +static int dwc3_soft_reset(struct dwc3 *dwc) +{ + unsigned long timeout; + u32 reg; + + timeout = jiffies + msecs_to_jiffies(500); + dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); + do { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (!(reg & DWC3_DCTL_CSFTRST)) + break; + + if (time_after(jiffies, timeout)) { + dev_err(dwc->dev, "Reset Timed Out\n"); + return -ETIMEDOUT; + } + + cpu_relax(); + } while (true); + + return 0; +} + +/** * dwc3_free_one_event_buffer - Frees one event buffer * @dwc: Pointer to our controller context structure * @evt: Pointer to event buffer to be freed @@ -367,10 +394,15 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) /** * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core * @dwc: Pointer to our controller context structure + * + * Returns 0 on success. The USB PHY interfaces are configured but not + * initialized. The PHY interfaces and the PHYs get initialized together with + * the core in dwc3_core_init. */ -static void dwc3_phy_setup(struct dwc3 *dwc) +static int dwc3_phy_setup(struct dwc3 *dwc) { u32 reg; + int ret; reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); @@ -409,10 +441,43 @@ static void dwc3_phy_setup(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); - mdelay(100); - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + /* Select the HS PHY interface */ + switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { + case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI: + if (dwc->hsphy_interface && + !strncmp(dwc->hsphy_interface, "utmi", 4)) { + reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI; + break; + } else if (dwc->hsphy_interface && + !strncmp(dwc->hsphy_interface, "ulpi", 4)) { + reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } else { + dev_warn(dwc->dev, "HSPHY Interface not defined\n"); + + /* Relying on default value. */ + if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) + break; + } + /* FALLTHROUGH */ + case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: + /* Making sure the interface and PHY are operational */ + ret = dwc3_soft_reset(dwc); + if (ret) + return ret; + + udelay(1); + + ret = dwc3_ulpi_init(dwc); + if (ret) + return ret; + /* FALLTHROUGH */ + default: + break; + } + /* * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to * '0' during coreConsultant configuration. So default value will @@ -427,7 +492,7 @@ static void dwc3_phy_setup(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - mdelay(100); + return 0; } /** @@ -438,7 +503,6 @@ static void dwc3_phy_setup(struct dwc3 *dwc) */ static int dwc3_core_init(struct dwc3 *dwc) { - unsigned long timeout; u32 hwparams4 = dwc->hwparams.hwparams4; u32 reg; int ret; @@ -466,21 +530,9 @@ static int dwc3_core_init(struct dwc3 *dwc) } /* issue device SoftReset too */ - timeout = jiffies + msecs_to_jiffies(500); - dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); - do { - reg = dwc3_readl(dwc->regs, DWC3_DCTL); - if (!(reg & DWC3_DCTL_CSFTRST)) - break; - - if (time_after(jiffies, timeout)) { - dev_err(dwc->dev, "Reset Timed Out\n"); - ret = -ETIMEDOUT; - goto err0; - } - - cpu_relax(); - } while (true); + ret = dwc3_soft_reset(dwc); + if (ret) + goto err0; ret = dwc3_core_soft_reset(dwc); if (ret) @@ -555,8 +607,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); - dwc3_phy_setup(dwc); - ret = dwc3_alloc_scratch_buffers(dwc); if (ret) goto err1; @@ -774,17 +824,13 @@ static int dwc3_probe(struct platform_device *pdev) * since it will be requested by the xhci-plat driver. */ regs = devm_ioremap_resource(dev, res); - if (IS_ERR(regs)) - return PTR_ERR(regs); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + goto err0; + } dwc->regs = regs; dwc->regs_size = resource_size(res); - /* - * restore res->start back to its original value so that, - * in case the probe is deferred, we don't end up getting error in - * request the memory region the next time probe is called. - */ - res->start -= DWC3_GLOBALS_REGS_START; /* default to highest possible threshold */ lpm_nyet_threshold = 0xff; @@ -808,6 +854,8 @@ static int dwc3_probe(struct platform_device *pdev) "snps,is-utmi-l1-suspend"); of_property_read_u8(node, "snps,hird-threshold", &hird_threshold); + dwc->usb3_lpm_capable = of_property_read_bool(node, + "snps,usb3_lpm_capable"); dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); @@ -838,6 +886,8 @@ static int dwc3_probe(struct platform_device *pdev) "snps,tx_de_emphasis_quirk"); of_property_read_u8(node, "snps,tx_de_emphasis", &tx_de_emphasis); + of_property_read_string(node, "snps,hsphy_interface", + &dwc->hsphy_interface); } else if (pdata) { dwc->maximum_speed = pdata->maximum_speed; dwc->has_lpm_erratum = pdata->has_lpm_erratum; @@ -848,6 +898,7 @@ static int dwc3_probe(struct platform_device *pdev) hird_threshold = pdata->hird_threshold; dwc->needs_fifo_resize = pdata->tx_fifo_resize; + dwc->usb3_lpm_capable = pdata->usb3_lpm_capable; dwc->dr_mode = pdata->dr_mode; dwc->disable_scramble_quirk = pdata->disable_scramble_quirk; @@ -864,6 +915,8 @@ static int dwc3_probe(struct platform_device *pdev) dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk; if (pdata->tx_de_emphasis) tx_de_emphasis = pdata->tx_de_emphasis; + + dwc->hsphy_interface = pdata->hsphy_interface; } /* default to superspeed if no maximum_speed passed */ @@ -876,12 +929,18 @@ static int dwc3_probe(struct platform_device *pdev) dwc->hird_threshold = hird_threshold | (dwc->is_utmi_l1_suspend << 4); + platform_set_drvdata(pdev, dwc); + dwc3_cache_hwparams(dwc); + + ret = dwc3_phy_setup(dwc); + if (ret) + goto err0; + ret = dwc3_core_get_phy(dwc); if (ret) - return ret; + goto err0; spin_lock_init(&dwc->lock); - platform_set_drvdata(pdev, dwc); if (!dev->dma_mask) { dev->dma_mask = dev->parent->dma_mask; @@ -893,13 +952,11 @@ static int dwc3_probe(struct platform_device *pdev) pm_runtime_get_sync(dev); pm_runtime_forbid(dev); - dwc3_cache_hwparams(dwc); - ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); if (ret) { dev_err(dwc->dev, "failed to allocate event buffers\n"); ret = -ENOMEM; - goto err0; + goto err1; } if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) @@ -913,58 +970,67 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); - goto err0; + goto err1; } usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); ret = phy_power_on(dwc->usb2_generic_phy); if (ret < 0) - goto err1; + goto err2; ret = phy_power_on(dwc->usb3_generic_phy); if (ret < 0) - goto err_usb2phy_power; + goto err3; ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err_usb3phy_power; + goto err4; } ret = dwc3_core_init_mode(dwc); if (ret) - goto err2; + goto err5; ret = dwc3_debugfs_init(dwc); if (ret) { dev_err(dev, "failed to initialize debugfs\n"); - goto err3; + goto err6; } pm_runtime_allow(dev); return 0; -err3: +err6: dwc3_core_exit_mode(dwc); -err2: +err5: dwc3_event_buffers_cleanup(dwc); -err_usb3phy_power: +err4: phy_power_off(dwc->usb3_generic_phy); -err_usb2phy_power: +err3: phy_power_off(dwc->usb2_generic_phy); -err1: +err2: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); dwc3_core_exit(dwc); -err0: +err1: dwc3_free_event_buffers(dwc); + dwc3_ulpi_exit(dwc); + +err0: + /* + * restore res->start back to its original value so that, in case the + * probe is deferred, we don't end up getting error in request the + * memory region the next time probe is called. + */ + res->start -= DWC3_GLOBALS_REGS_START; return ret; } @@ -972,6 +1038,14 @@ err0: static int dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* + * restore res->start back to its original value so that, in case the + * probe is deferred, we don't end up getting error in request the + * memory region the next time probe is called. + */ + res->start -= DWC3_GLOBALS_REGS_START; dwc3_debugfs_exit(dwc); dwc3_core_exit_mode(dwc); @@ -984,6 +1058,7 @@ static int dwc3_remove(struct platform_device *pdev) phy_power_off(dwc->usb3_generic_phy); dwc3_core_exit(dwc); + dwc3_ulpi_exit(dwc); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index d201910b892f..044778884585 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -30,6 +30,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/otg.h> +#include <linux/ulpi/interface.h> #include <linux/phy/phy.h> @@ -173,6 +174,15 @@ /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) +#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4) + +/* Global USB2 PHY Vendor Control Register */ +#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25) +#define DWC3_GUSB2PHYACC_BUSY (1 << 23) +#define DWC3_GUSB2PHYACC_WRITE (1 << 22) +#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16) +#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8) +#define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff) /* Global USB3 PIPE Control Register */ #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) @@ -339,7 +349,7 @@ #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 -#define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1) +#define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F) #define DWC3_DGCMD_CMDACT (1 << 10) #define DWC3_DGCMD_CMDIOC (1 << 8) @@ -355,7 +365,7 @@ #define DWC3_DEPCMD_PARAM_SHIFT 16 #define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT) #define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) -#define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1) +#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F) #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) #define DWC3_DEPCMD_CMDACT (1 << 10) #define DWC3_DEPCMD_CMDIOC (1 << 8) @@ -652,6 +662,7 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @ulpi: pointer to ulpi interface * @dcfg: saved contents of DCFG register * @gctl: saved contents of GCTL register * @isoch_delay: wValue from Set Isochronous Delay request; @@ -673,6 +684,7 @@ struct dwc3_scratchpad_array { * @test_mode_nr: test feature selector * @lpm_nyet_threshold: LPM NYET response threshold * @hird_threshold: HIRD threshold + * @hsphy_interface: "utmi" or "ulpi" * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer @@ -689,6 +701,7 @@ struct dwc3_scratchpad_array { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued * @three_stage_setup: set if we perform a three phase setup + * @usb3_lpm_capable: set if hadrware supports Link Power Management * @disable_scramble_quirk: set if we enable the disable scramble quirk * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk @@ -738,6 +751,8 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + struct ulpi *ulpi; + void __iomem *regs; size_t regs_size; @@ -799,6 +814,8 @@ struct dwc3 { u8 lpm_nyet_threshold; u8 hird_threshold; + const char *hsphy_interface; + unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; @@ -812,6 +829,7 @@ struct dwc3 { unsigned setup_packet_pending:1; unsigned start_config_issued:1; unsigned three_stage_setup:1; + unsigned usb3_lpm_capable:1; unsigned disable_scramble_quirk:1; unsigned u2exit_lfps_quirk:1; @@ -1033,4 +1051,14 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc) } #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */ +#if IS_ENABLED(CONFIG_USB_DWC3_ULPI) +int dwc3_ulpi_init(struct dwc3 *dwc); +void dwc3_ulpi_exit(struct dwc3 *dwc); +#else +static inline int dwc3_ulpi_init(struct dwc3 *dwc) +{ return 0; } +static inline void dwc3_ulpi_exit(struct dwc3 *dwc) +{ } +#endif + #endif /* __DRIVERS_USB_DWC3_CORE_H */ diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 52e0c4e5e48e..6b486a36863c 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -65,8 +65,8 @@ #define USBOTGSS_IRQENABLE_SET_MISC 0x003c #define USBOTGSS_IRQENABLE_CLR_MISC 0x0040 #define USBOTGSS_IRQMISC_OFFSET 0x03fc -#define USBOTGSS_UTMI_OTG_CTRL 0x0080 -#define USBOTGSS_UTMI_OTG_STATUS 0x0084 +#define USBOTGSS_UTMI_OTG_STATUS 0x0080 +#define USBOTGSS_UTMI_OTG_CTRL 0x0084 #define USBOTGSS_UTMI_OTG_OFFSET 0x0480 #define USBOTGSS_TXFIFO_DEPTH 0x0508 #define USBOTGSS_RXFIFO_DEPTH 0x050c @@ -98,20 +98,20 @@ #define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3) #define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0) -/* UTMI_OTG_CTRL REGISTER */ -#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) -#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) -#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) -#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) - /* UTMI_OTG_STATUS REGISTER */ -#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) -#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) -#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) -#define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) -#define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) -#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) -#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) +#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS (1 << 5) +#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS (1 << 4) +#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS (1 << 3) +#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP (1 << 0) + +/* UTMI_OTG_CTRL REGISTER */ +#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE (1 << 31) +#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT (1 << 9) +#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE (1 << 8) +#define USBOTGSS_UTMI_OTG_CTRL_IDDIG (1 << 4) +#define USBOTGSS_UTMI_OTG_CTRL_SESSEND (1 << 3) +#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID (1 << 2) +#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID (1 << 1) struct dwc3_omap { struct device *dev; @@ -119,7 +119,7 @@ struct dwc3_omap { int irq; void __iomem *base; - u32 utmi_otg_status; + u32 utmi_otg_ctrl; u32 utmi_otg_offset; u32 irqmisc_offset; u32 irq_eoi_offset; @@ -153,15 +153,15 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offset); } -static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap) +static u32 dwc3_omap_read_utmi_ctrl(struct dwc3_omap *omap) { - return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS + + return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_CTRL + omap->utmi_otg_offset); } -static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value) +static void dwc3_omap_write_utmi_ctrl(struct dwc3_omap *omap, u32 value) { - dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS + + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_CTRL + omap->utmi_otg_offset, value); } @@ -235,25 +235,25 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, } } - val = dwc3_omap_read_utmi_status(omap); - val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG - | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID - | USBOTGSS_UTMI_OTG_STATUS_SESSEND); - val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID - | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; - dwc3_omap_write_utmi_status(omap, val); + val = dwc3_omap_read_utmi_ctrl(omap); + val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID + | USBOTGSS_UTMI_OTG_CTRL_SESSEND); + val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID + | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + dwc3_omap_write_utmi_ctrl(omap, val); break; case OMAP_DWC3_VBUS_VALID: dev_dbg(omap->dev, "VBUS Connect\n"); - val = dwc3_omap_read_utmi_status(omap); - val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND; - val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG - | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID - | USBOTGSS_UTMI_OTG_STATUS_SESSVALID - | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; - dwc3_omap_write_utmi_status(omap, val); + val = dwc3_omap_read_utmi_ctrl(omap); + val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND; + val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID + | USBOTGSS_UTMI_OTG_CTRL_SESSVALID + | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + dwc3_omap_write_utmi_ctrl(omap, val); break; case OMAP_DWC3_ID_FLOAT: @@ -263,13 +263,13 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, case OMAP_DWC3_VBUS_OFF: dev_dbg(omap->dev, "VBUS Disconnect\n"); - val = dwc3_omap_read_utmi_status(omap); - val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID - | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID - | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT); - val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND - | USBOTGSS_UTMI_OTG_STATUS_IDDIG; - dwc3_omap_write_utmi_status(omap, val); + val = dwc3_omap_read_utmi_ctrl(omap); + val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID + | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT); + val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND + | USBOTGSS_UTMI_OTG_CTRL_IDDIG; + dwc3_omap_write_utmi_ctrl(omap, val); break; default: @@ -325,15 +325,6 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) return IRQ_HANDLED; } -static int dwc3_omap_remove_core(struct device *dev, void *c) -{ - struct platform_device *pdev = to_platform_device(dev); - - of_device_unregister(pdev); - - return 0; -} - static void dwc3_omap_enable_irqs(struct dwc3_omap *omap) { u32 reg; @@ -431,22 +422,22 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap) struct device_node *node = omap->dev->of_node; int utmi_mode = 0; - reg = dwc3_omap_read_utmi_status(omap); + reg = dwc3_omap_read_utmi_ctrl(omap); of_property_read_u32(node, "utmi-mode", &utmi_mode); switch (utmi_mode) { case DWC3_OMAP_UTMI_MODE_SW: - reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + reg |= USBOTGSS_UTMI_OTG_CTRL_SW_MODE; break; case DWC3_OMAP_UTMI_MODE_HW: - reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + reg &= ~USBOTGSS_UTMI_OTG_CTRL_SW_MODE; break; default: dev_dbg(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode); } - dwc3_omap_write_utmi_status(omap, reg); + dwc3_omap_write_utmi_ctrl(omap, reg); } static int dwc3_omap_extcon_register(struct dwc3_omap *omap) @@ -600,7 +591,7 @@ static int dwc3_omap_remove(struct platform_device *pdev) if (omap->extcon_id_dev.edev) extcon_unregister_interest(&omap->extcon_id_dev); dwc3_omap_disable_irqs(omap); - device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core); + of_platform_depopulate(omap->dev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -623,7 +614,7 @@ static int dwc3_omap_suspend(struct device *dev) { struct dwc3_omap *omap = dev_get_drvdata(dev); - omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap); + omap->utmi_otg_ctrl = dwc3_omap_read_utmi_ctrl(omap); dwc3_omap_disable_irqs(omap); return 0; @@ -633,7 +624,7 @@ static int dwc3_omap_resume(struct device *dev) { struct dwc3_omap *omap = dev_get_drvdata(dev); - dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status); + dwc3_omap_write_utmi_ctrl(omap, omap->utmi_otg_ctrl); dwc3_omap_enable_irqs(omap); pm_runtime_disable(dev); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 8d950569d557..27e4fc896e9d 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -21,11 +21,11 @@ #include <linux/slab.h> #include <linux/pci.h> #include <linux/platform_device.h> +#include <linux/gpio/consumer.h> +#include <linux/acpi.h> #include "platform_data.h" -/* FIXME define these in <linux/pci_ids.h> */ -#define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd #define PCI_DEVICE_ID_INTEL_BYT 0x0f37 #define PCI_DEVICE_ID_INTEL_MRFLD 0x119e @@ -33,6 +33,15 @@ #define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30 #define PCI_DEVICE_ID_INTEL_SPTH 0xa130 +static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; +static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = { + { "reset-gpios", &reset_gpios, 1 }, + { "cs-gpios", &cs_gpios, 1 }, + { }, +}; + static int dwc3_pci_quirks(struct pci_dev *pdev) { if (pdev->vendor == PCI_VENDOR_ID_AMD && @@ -67,6 +76,30 @@ static int dwc3_pci_quirks(struct pci_dev *pdev) sizeof(pdata)); } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_BYT) { + struct gpio_desc *gpio; + + acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev), + acpi_dwc3_byt_gpios); + + /* These GPIOs will turn on the USB2 PHY */ + gpio = gpiod_get(&pdev->dev, "cs"); + if (!IS_ERR(gpio)) { + gpiod_direction_output(gpio, 0); + gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); + } + + gpio = gpiod_get(&pdev->dev, "reset"); + if (!IS_ERR(gpio)) { + gpiod_direction_output(gpio, 0); + gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); + usleep_range(10000, 11000); + } + } + return 0; } @@ -130,6 +163,7 @@ err: static void dwc3_pci_remove(struct pci_dev *pci) { + acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev)); platform_device_unregister(pci_get_drvdata(pci)); } diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 2ef3c8d6a9db..69e769c35cf5 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -727,6 +727,10 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY"); ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); break; + case USB_REQ_SET_INTERFACE: + dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE"); + dwc->start_config_issued = false; + /* Fall through */ default: dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver"); ret = dwc3_ep0_delegate_req(dwc, ctrl); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a03a485205c7..333a7c0078fc 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -291,6 +291,8 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param) dwc3_trace(trace_dwc3_gadget, "Command Complete --> %d", DWC3_DGCMD_STATUS(reg)); + if (DWC3_DGCMD_STATUS(reg)) + return -EINVAL; return 0; } @@ -328,6 +330,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, dwc3_trace(trace_dwc3_gadget, "Command Complete --> %d", DWC3_DEPCMD_STATUS(reg)); + if (DWC3_DEPCMD_STATUS(reg)) + return -EINVAL; return 0; } @@ -1855,32 +1859,27 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, unsigned int i; int ret; + req = next_request(&dep->req_queued); + if (!req) { + WARN_ON_ONCE(1); + return 1; + } + i = 0; do { - req = next_request(&dep->req_queued); - if (!req) { - WARN_ON_ONCE(1); - return 1; - } - i = 0; - do { - slot = req->start_slot + i; - if ((slot == DWC3_TRB_NUM - 1) && + slot = req->start_slot + i; + if ((slot == DWC3_TRB_NUM - 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) - slot++; - slot %= DWC3_TRB_NUM; - trb = &dep->trb_pool[slot]; - - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status); - if (ret) - break; - }while (++i < req->request.num_mapped_sgs); - - dwc3_gadget_giveback(dep, req, status); + slot++; + slot %= DWC3_TRB_NUM; + trb = &dep->trb_pool[slot]; + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, + event, status); if (ret) break; - } while (1); + } while (++i < req->request.num_mapped_sgs); + + dwc3_gadget_giveback(dep, req, status); if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && list_empty(&dep->req_queued)) { @@ -1907,12 +1906,16 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, { unsigned status = 0; int clean_busy; + u32 is_xfer_complete; + + is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE); if (event->status & DEPEVT_STATUS_BUSERR) status = -ECONNRESET; clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); - if (clean_busy) + if (clean_busy && (is_xfer_complete || + usb_endpoint_xfer_isoc(dep->endpoint.desc))) dep->flags &= ~DWC3_EP_BUSY; /* diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 12bfd3c5405e..c679f63783ae 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -49,9 +49,7 @@ int dwc3_host_init(struct dwc3 *dwc) memset(&pdata, 0, sizeof(pdata)); -#ifdef CONFIG_DWC3_HOST_USB3_LPM_ENABLE - pdata.usb3_lpm_capable = 1; -#endif + pdata.usb3_lpm_capable = dwc->usb3_lpm_capable; ret = platform_device_add_data(xhci, &pdata, sizeof(pdata)); if (ret) { diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h index a3a3b6d5668c..d3614ecbb9ca 100644 --- a/drivers/usb/dwc3/platform_data.h +++ b/drivers/usb/dwc3/platform_data.h @@ -24,6 +24,7 @@ struct dwc3_platform_data { enum usb_device_speed maximum_speed; enum usb_dr_mode dr_mode; bool tx_fifo_resize; + bool usb3_lpm_capable; unsigned is_utmi_l1_suspend:1; u8 hird_threshold; @@ -44,4 +45,6 @@ struct dwc3_platform_data { unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; + + const char *hsphy_interface; }; diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c new file mode 100644 index 000000000000..ec004c6d76f2 --- /dev/null +++ b/drivers/usb/dwc3/ulpi.c @@ -0,0 +1,91 @@ +/** + * ulpi.c - DesignWare USB3 Controller's ULPI PHY interface + * + * Copyright (C) 2015 Intel Corporation + * + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/ulpi/regs.h> + +#include "core.h" +#include "io.h" + +#define DWC3_ULPI_ADDR(a) \ + ((a >= ULPI_EXT_VENDOR_SPECIFIC) ? \ + DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \ + DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a)) + +static int dwc3_ulpi_busyloop(struct dwc3 *dwc) +{ + unsigned count = 1000; + u32 reg; + + while (count--) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0)); + if (!(reg & DWC3_GUSB2PHYACC_BUSY)) + return 0; + cpu_relax(); + } + + return -ETIMEDOUT; +} + +static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr) +{ + struct dwc3 *dwc = dev_get_drvdata(ops->dev); + u32 reg; + int ret; + + reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg); + + ret = dwc3_ulpi_busyloop(dwc); + if (ret) + return ret; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0)); + + return DWC3_GUSB2PHYACC_DATA(reg); +} + +static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val) +{ + struct dwc3 *dwc = dev_get_drvdata(ops->dev); + u32 reg; + + reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); + reg |= DWC3_GUSB2PHYACC_WRITE | val; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg); + + return dwc3_ulpi_busyloop(dwc); +} + +static struct ulpi_ops dwc3_ulpi_ops = { + .read = dwc3_ulpi_read, + .write = dwc3_ulpi_write, +}; + +int dwc3_ulpi_init(struct dwc3 *dwc) +{ + /* Register the interface */ + dwc->ulpi = ulpi_register_interface(dwc->dev, &dwc3_ulpi_ops); + if (IS_ERR(dwc->ulpi)) { + dev_err(dwc->dev, "failed to register ULPI interface"); + return PTR_ERR(dwc->ulpi); + } + + return 0; +} + +void dwc3_ulpi_exit(struct dwc3 *dwc) +{ + if (dwc->ulpi) { + ulpi_unregister_interface(dwc->ulpi); + dwc->ulpi = NULL; + } +} diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b454d05be583..bcf83c0a6e62 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -196,6 +196,9 @@ config USB_F_MIDI config USB_F_HID tristate +config USB_F_PRINTER + tristate + choice tristate "USB Gadget Drivers" default USB_ETH @@ -434,6 +437,20 @@ config USB_CONFIGFS_F_UVC device. It provides a userspace API to process UVC control requests and stream video data to the host. +config USB_CONFIGFS_F_PRINTER + bool "Printer function" + select USB_F_PRINTER + depends on USB_CONFIGFS + help + The Printer function channels data between the USB host and a + userspace program driving the print engine. The user space + program reads and writes the device file /dev/g_printer<X> to + receive or send printer data. It can use ioctl calls to + the device file to get or set printer status. + + For more information, see Documentation/usb/gadget_printer.txt + which includes sample code for accessing the device file. + source "drivers/usb/gadget/legacy/Kconfig" endchoice diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 13adfd1a3f54..58b4657fc721 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1161,11 +1161,11 @@ static struct usb_gadget_string_container *copy_gadget_strings( * This function will create a deep copy of usb_gadget_strings and usb_string * and attach it to the cdev. The actual string (usb_string.s) will not be * copied but only a referenced will be made. The struct usb_gadget_strings - * array may contain multiple languges and should be NULL terminated. + * array may contain multiple languages and should be NULL terminated. * The ->language pointer of each struct usb_gadget_strings has to contain the * same amount of entries. * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first - * usb_string entry of es-ES containts the translation of the first usb_string + * usb_string entry of es-ES contains the translation of the first usb_string * entry of en-US. Therefore both entries become the same id assign. */ struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev, @@ -1472,6 +1472,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) req->length = 0; gadget->ep0->driver_data = cdev; + /* + * Don't let non-standard requests match any of the cases below + * by accident. + */ + if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) + goto unknown; + switch (ctrl->bRequest) { /* we handle all standard USB descriptors */ @@ -1751,6 +1758,13 @@ unknown: * take such requests too, if that's ever needed: to work * in config 0, etc. */ + if (cdev->config) { + list_for_each_entry(f, &cdev->config->functions, list) + if (f->req_match && f->req_match(f, ctrl)) + goto try_fun_setup; + f = NULL; + } + switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) @@ -1768,7 +1782,7 @@ unknown: f = NULL; break; } - +try_fun_setup: if (f && f->setup) value = f->setup(f, ctrl); else { diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index c42765b3a060..289e20119fea 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -571,7 +571,7 @@ static struct config_group *function_make( if (IS_ERR(fi)) return ERR_CAST(fi); - ret = config_item_set_name(&fi->group.cg_item, name); + ret = config_item_set_name(&fi->group.cg_item, "%s", name); if (ret) { usb_put_function_instance(fi); return ERR_PTR(ret); @@ -1295,6 +1295,7 @@ static void purge_configs_funcs(struct gadget_info *gi) } } c->next_interface_id = 0; + memset(c->interface, 0, sizeof(c->interface)); c->superspeed = 0; c->highspeed = 0; c->fullspeed = 0; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 0567cca1465e..919cdfdda78b 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -258,15 +258,25 @@ struct usb_ep *usb_ep_autoconfig_ss( /* First, apply chip-specific "best usage" knowledge. * This might make a good usb_gadget_ops hook ... */ - if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) { - /* ep-e, ep-f are PIO with only 64 byte fifos */ - ep = find_ep (gadget, "ep-e"); - if (ep && ep_matches(gadget, ep, desc, ep_comp)) - goto found_ep; - ep = find_ep (gadget, "ep-f"); + if (gadget_is_net2280(gadget)) { + char name[8]; + + if (type == USB_ENDPOINT_XFER_INT) { + /* ep-e, ep-f are PIO with only 64 byte fifos */ + ep = find_ep(gadget, "ep-e"); + if (ep && ep_matches(gadget, ep, desc, ep_comp)) + goto found_ep; + ep = find_ep(gadget, "ep-f"); + if (ep && ep_matches(gadget, ep, desc, ep_comp)) + goto found_ep; + } + + /* USB3380: use same address for usb and hardware endpoints */ + snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc), + usb_endpoint_dir_in(desc) ? "in" : "out"); + ep = find_ep(gadget, name); if (ep && ep_matches(gadget, ep, desc, ep_comp)) goto found_ep; - } else if (gadget_is_goku (gadget)) { if (USB_ENDPOINT_XFER_INT == type) { /* single buffering is enough */ diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile index f71b1aaa0edf..bd7def576955 100644 --- a/drivers/usb/gadget/function/Makefile +++ b/drivers/usb/gadget/function/Makefile @@ -42,3 +42,5 @@ usb_f_midi-y := f_midi.o obj-$(CONFIG_USB_F_MIDI) += usb_f_midi.o usb_f_hid-y := f_hid.o obj-$(CONFIG_USB_F_HID) += usb_f_hid.o +usb_f_printer-y := f_printer.o +obj-$(CONFIG_USB_F_PRINTER) += usb_f_printer.o diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 175c9956cbe3..6e7be91e6097 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -23,6 +23,7 @@ #include <linux/export.h> #include <linux/hid.h> #include <linux/module.h> +#include <linux/uio.h> #include <asm/unaligned.h> #include <linux/usb/composite.h> @@ -314,7 +315,6 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, return ret; } - set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags); return len; } break; @@ -655,9 +655,10 @@ static void ffs_user_copy_worker(struct work_struct *work) unuse_mm(io_data->mm); } - aio_complete(io_data->kiocb, ret, ret); + io_data->kiocb->ki_complete(io_data->kiocb, ret, ret); - if (io_data->ffs->ffs_eventfd && !io_data->kiocb->ki_eventfd) + if (io_data->ffs->ffs_eventfd && + !(io_data->kiocb->ki_flags & IOCB_EVENTFD)) eventfd_signal(io_data->ffs->ffs_eventfd, 1); usb_ep_free_request(io_data->ep, io_data->req); @@ -845,7 +846,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) ret = ep->status; if (io_data->read && ret > 0) { ret = copy_to_iter(data, ret, &io_data->data); - if (unlikely(iov_iter_count(&io_data->data))) + if (!ret) ret = -EFAULT; } } @@ -923,7 +924,8 @@ static ssize_t ffs_epfile_write_iter(struct kiocb *kiocb, struct iov_iter *from) kiocb->private = p; - kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); + if (p->aio) + kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); res = ffs_epfile_io(kiocb->ki_filp, p); if (res == -EIOCBQUEUED) @@ -967,7 +969,8 @@ static ssize_t ffs_epfile_read_iter(struct kiocb *kiocb, struct iov_iter *to) kiocb->private = p; - kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); + if (p->aio) + kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); res = ffs_epfile_io(kiocb->ki_filp, p); if (res == -EIOCBQUEUED) @@ -1059,8 +1062,6 @@ static const struct file_operations ffs_epfile_operations = { .llseek = no_llseek, .open = ffs_epfile_open, - .write = new_sync_write, - .read = new_sync_read, .write_iter = ffs_epfile_write_iter, .read_iter = ffs_epfile_read_iter, .release = ffs_epfile_release, @@ -1463,8 +1464,7 @@ static void ffs_data_clear(struct ffs_data *ffs) { ENTER(); - if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags)) - ffs_closed(ffs); + ffs_closed(ffs); BUG_ON(ffs->gadget); @@ -3422,9 +3422,13 @@ static int ffs_ready(struct ffs_data *ffs) ffs_obj->desc_ready = true; ffs_obj->ffs_data = ffs; - if (ffs_obj->ffs_ready_callback) + if (ffs_obj->ffs_ready_callback) { ret = ffs_obj->ffs_ready_callback(ffs); + if (ret) + goto done; + } + set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags); done: ffs_dev_unlock(); return ret; @@ -3433,6 +3437,7 @@ done: static void ffs_closed(struct ffs_data *ffs) { struct ffs_dev *ffs_obj; + struct f_fs_opts *opts; ENTER(); ffs_dev_lock(); @@ -3443,11 +3448,17 @@ static void ffs_closed(struct ffs_data *ffs) ffs_obj->desc_ready = false; - if (ffs_obj->ffs_closed_callback) + if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags) && + ffs_obj->ffs_closed_callback) ffs_obj->ffs_closed_callback(ffs); - if (!ffs_obj->opts || ffs_obj->opts->no_configfs - || !ffs_obj->opts->func_inst.group.cg_item.ci_parent) + if (ffs_obj->opts) + opts = ffs_obj->opts; + else + goto done; + + if (opts->no_configfs || !opts->func_inst.group.cg_item.ci_parent + || !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount)) goto done; unregister_gadget_item(ffs_obj->opts-> diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index a2612fb79eff..6df9715a4bcd 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -437,12 +437,20 @@ static int hidg_setup(struct usb_function *f, | USB_REQ_GET_DESCRIPTOR): switch (value >> 8) { case HID_DT_HID: + { + struct hid_descriptor hidg_desc_copy = hidg_desc; + VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: HID\n"); + hidg_desc_copy.desc[0].bDescriptorType = HID_DT_REPORT; + hidg_desc_copy.desc[0].wDescriptorLength = + cpu_to_le16(hidg->report_desc_length); + length = min_t(unsigned short, length, - hidg_desc.bLength); - memcpy(req->buf, &hidg_desc, length); + hidg_desc_copy.bLength); + memcpy(req->buf, &hidg_desc_copy, length); goto respond; break; + } case HID_DT_REPORT: VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: REPORT\n"); length = min_t(unsigned short, length, @@ -632,6 +640,10 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f) hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); hidg_fs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); + /* + * We can use hidg_desc struct here but we should not relay + * that its content won't change after returning from this function. + */ hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT; hidg_desc.desc[0].wDescriptorLength = cpu_to_le16(hidg->report_desc_length); @@ -687,6 +699,10 @@ static inline int hidg_get_minor(void) int ret; ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL); + if (ret >= HIDG_MINORS) { + ida_simple_remove(&hidg_ida, ret); + ret = -ENODEV; + } return ret; } @@ -908,7 +924,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) /* disable/free request and end point */ usb_ep_disable(hidg->in_ep); - usb_ep_dequeue(hidg->in_ep, hidg->req); kfree(hidg->req->buf); usb_ep_free_request(hidg->in_ep, hidg->req); diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 811929cd4c9e..f936268d26c6 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -1085,7 +1085,7 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) if (!curlun) { /* Unsupported LUNs are okay */ common->bad_lun_okay = 1; memset(buf, 0, 36); - buf[0] = 0x7f; /* Unsupported, no device-type */ + buf[0] = TYPE_NO_LUN; /* Unsupported, no device-type */ buf[4] = 31; /* Additional length */ return 36; } @@ -2624,13 +2624,10 @@ static ssize_t file_store(struct device *dev, struct device_attribute *attr, return fsg_store_file(curlun, filesem, buf, count); } -static DEVICE_ATTR_RW(ro); static DEVICE_ATTR_RW(nofua); -static DEVICE_ATTR_RW(file); - -static struct device_attribute dev_attr_ro_cdrom = __ATTR_RO(ro); -static struct device_attribute dev_attr_file_nonremovable = __ATTR_RO(file); - +/* mode wil be set in fsg_lun_attr_is_visible() */ +static DEVICE_ATTR(ro, 0, ro_show, ro_store); +static DEVICE_ATTR(file, 0, file_show, file_store); /****************************** FSG COMMON ******************************/ @@ -2745,40 +2742,10 @@ error_release: } EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers); -static inline void fsg_common_remove_sysfs(struct fsg_lun *lun) -{ - device_remove_file(&lun->dev, &dev_attr_nofua); - /* - * device_remove_file() => - * - * here the attr (e.g. dev_attr_ro) is only used to be passed to: - * - * sysfs_remove_file() => - * - * here e.g. both dev_attr_ro_cdrom and dev_attr_ro are in - * the same namespace and - * from here only attr->name is passed to: - * - * sysfs_hash_and_remove() - * - * attr->name is the same for dev_attr_ro_cdrom and - * dev_attr_ro - * attr->name is the same for dev_attr_file and - * dev_attr_file_nonremovable - * - * so we don't differentiate between removing e.g. dev_attr_ro_cdrom - * and dev_attr_ro - */ - device_remove_file(&lun->dev, &dev_attr_ro); - device_remove_file(&lun->dev, &dev_attr_file); -} - void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs) { - if (sysfs) { - fsg_common_remove_sysfs(lun); + if (sysfs) device_unregister(&lun->dev); - } fsg_lun_close(lun); kfree(lun); } @@ -2819,7 +2786,7 @@ int fsg_common_set_nluns(struct fsg_common *common, int nluns) return -EINVAL; } - curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL); + curlun = kcalloc(FSG_MAX_LUNS, sizeof(*curlun), GFP_KERNEL); if (unlikely(!curlun)) return -ENOMEM; @@ -2829,8 +2796,6 @@ int fsg_common_set_nluns(struct fsg_common *common, int nluns) common->luns = curlun; common->nluns = nluns; - pr_info("Number of LUNs=%d\n", common->nluns); - return 0; } EXPORT_SYMBOL_GPL(fsg_common_set_nluns); @@ -2877,41 +2842,35 @@ int fsg_common_set_cdev(struct fsg_common *common, } EXPORT_SYMBOL_GPL(fsg_common_set_cdev); -static inline int fsg_common_add_sysfs(struct fsg_common *common, - struct fsg_lun *lun) -{ - int rc; +static struct attribute *fsg_lun_dev_attrs[] = { + &dev_attr_ro.attr, + &dev_attr_file.attr, + &dev_attr_nofua.attr, + NULL +}; - rc = device_register(&lun->dev); - if (rc) { - put_device(&lun->dev); - return rc; - } +static umode_t fsg_lun_dev_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct fsg_lun *lun = fsg_lun_from_dev(dev); - rc = device_create_file(&lun->dev, - lun->cdrom - ? &dev_attr_ro_cdrom - : &dev_attr_ro); - if (rc) - goto error; - rc = device_create_file(&lun->dev, - lun->removable - ? &dev_attr_file - : &dev_attr_file_nonremovable); - if (rc) - goto error; - rc = device_create_file(&lun->dev, &dev_attr_nofua); - if (rc) - goto error; + if (attr == &dev_attr_ro.attr) + return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO); + if (attr == &dev_attr_file.attr) + return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO; + return attr->mode; +} - return 0; +static const struct attribute_group fsg_lun_dev_group = { + .attrs = fsg_lun_dev_attrs, + .is_visible = fsg_lun_dev_is_visible, +}; -error: - /* removing nonexistent files is a no-op */ - fsg_common_remove_sysfs(lun); - device_unregister(&lun->dev); - return rc; -} +static const struct attribute_group *fsg_lun_dev_groups[] = { + &fsg_lun_dev_group, + NULL +}; int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, unsigned int id, const char *name, @@ -2949,13 +2908,15 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, } else { lun->dev.release = fsg_lun_release; lun->dev.parent = &common->gadget->dev; + lun->dev.groups = fsg_lun_dev_groups; dev_set_drvdata(&lun->dev, &common->filesem); dev_set_name(&lun->dev, "%s", name); lun->name = dev_name(&lun->dev); - rc = fsg_common_add_sysfs(common, lun); + rc = device_register(&lun->dev); if (rc) { pr_info("failed to register LUN%d: %d\n", id, rc); + put_device(&lun->dev); goto error_sysfs; } } @@ -2973,7 +2934,7 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, if (fsg_lun_is_open(lun)) { p = "(error)"; if (pathbuf) { - p = d_path(&lun->filp->f_path, pathbuf, PATH_MAX); + p = file_path(lun->filp, pathbuf, PATH_MAX); if (IS_ERR(p)) p = "(error)"; } @@ -2988,10 +2949,8 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, return 0; error_lun: - if (common->sysfs) { - fsg_common_remove_sysfs(lun); + if (common->sysfs) device_unregister(&lun->dev); - } fsg_lun_close(lun); common->luns[id] = NULL; error_sysfs: @@ -3077,8 +3036,6 @@ static void fsg_common_release(struct kref *ref) struct fsg_lun *lun = *lun_it; if (!lun) continue; - if (common->sysfs) - fsg_common_remove_sysfs(lun); fsg_lun_close(lun); if (common->sysfs) device_unregister(&lun->dev); @@ -3604,14 +3561,26 @@ static struct usb_function *fsg_alloc(struct usb_function_instance *fi) struct fsg_opts *opts = fsg_opts_from_func_inst(fi); struct fsg_common *common = opts->common; struct fsg_dev *fsg; + unsigned nluns, i; fsg = kzalloc(sizeof(*fsg), GFP_KERNEL); if (unlikely(!fsg)) return ERR_PTR(-ENOMEM); mutex_lock(&opts->lock); + if (!opts->refcnt) { + for (nluns = i = 0; i < FSG_MAX_LUNS; ++i) + if (common->luns[i]) + nluns = i + 1; + if (!nluns) + pr_warn("No LUNS defined, continuing anyway\n"); + else + common->nluns = nluns; + pr_info("Number of LUNs=%u\n", common->nluns); + } opts->refcnt++; mutex_unlock(&opts->lock); + fsg->function.name = FSG_DRIVER_DESC; fsg->function.bind = fsg_bind; fsg->function.unbind = fsg_unbind; diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 259b656c0b3e..ad50a67c1465 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -973,7 +973,13 @@ static ssize_t f_midi_opts_id_show(struct f_midi_opts *opts, char *page) int result; mutex_lock(&opts->lock); - result = strlcpy(page, opts->id, PAGE_SIZE); + if (opts->id) { + result = strlcpy(page, opts->id, PAGE_SIZE); + } else { + page[0] = 0; + result = 0; + } + mutex_unlock(&opts->lock); return result; @@ -1139,7 +1145,7 @@ static struct usb_function *f_midi_alloc(struct usb_function_instance *fi) if (opts->id && !midi->id) { status = -ENOMEM; mutex_unlock(&opts->lock); - goto kstrdup_fail; + goto setup_fail; } midi->in_ports = opts->in_ports; midi->out_ports = opts->out_ports; @@ -1158,8 +1164,6 @@ static struct usb_function *f_midi_alloc(struct usb_function_instance *fi) return &midi->func; -kstrdup_fail: - f_midi_unregister_card(midi); setup_fail: for (--i; i >= 0; i--) kfree(midi->in_port[i]); diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c new file mode 100644 index 000000000000..357f63f47b42 --- /dev/null +++ b/drivers/usb/gadget/function/f_printer.c @@ -0,0 +1,1479 @@ +/* + * f_printer.c - USB printer function driver + * + * Copied from drivers/usb/gadget/legacy/printer.c, + * which was: + * + * printer.c -- Printer gadget driver + * + * Copyright (C) 2003-2005 David Brownell + * Copyright (C) 2006 Craig W. Nadler + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/idr.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/moduleparam.h> +#include <linux/fs.h> +#include <linux/poll.h> +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/cdev.h> + +#include <asm/byteorder.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/uaccess.h> +#include <asm/unaligned.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/composite.h> +#include <linux/usb/gadget.h> +#include <linux/usb/g_printer.h> + +#include "u_printer.h" + +#define PNP_STRING_LEN 1024 +#define PRINTER_MINORS 4 +#define GET_DEVICE_ID 0 +#define GET_PORT_STATUS 1 +#define SOFT_RESET 2 + +static int major, minors; +static struct class *usb_gadget_class; +static DEFINE_IDA(printer_ida); +static DEFINE_MUTEX(printer_ida_lock); /* protects access do printer_ida */ + +/*-------------------------------------------------------------------------*/ + +struct printer_dev { + spinlock_t lock; /* lock this structure */ + /* lock buffer lists during read/write calls */ + struct mutex lock_printer_io; + struct usb_gadget *gadget; + s8 interface; + struct usb_ep *in_ep, *out_ep; + + struct list_head rx_reqs; /* List of free RX structs */ + struct list_head rx_reqs_active; /* List of Active RX xfers */ + struct list_head rx_buffers; /* List of completed xfers */ + /* wait until there is data to be read. */ + wait_queue_head_t rx_wait; + struct list_head tx_reqs; /* List of free TX structs */ + struct list_head tx_reqs_active; /* List of Active TX xfers */ + /* Wait until there are write buffers available to use. */ + wait_queue_head_t tx_wait; + /* Wait until all write buffers have been sent. */ + wait_queue_head_t tx_flush_wait; + struct usb_request *current_rx_req; + size_t current_rx_bytes; + u8 *current_rx_buf; + u8 printer_status; + u8 reset_printer; + int minor; + struct cdev printer_cdev; + u8 printer_cdev_open; + wait_queue_head_t wait; + unsigned q_len; + char *pnp_string; /* We don't own memory! */ + struct usb_function function; +}; + +static inline struct printer_dev *func_to_printer(struct usb_function *f) +{ + return container_of(f, struct printer_dev, function); +} + +/*-------------------------------------------------------------------------*/ + +/* + * DESCRIPTORS ... most are static, but strings and (full) configuration + * descriptors are built on demand. + */ + +/* holds our biggest descriptor */ +#define USB_DESC_BUFSIZE 256 +#define USB_BUFSIZE 8192 + +static struct usb_interface_descriptor intf_desc = { + .bLength = sizeof(intf_desc), + .bDescriptorType = USB_DT_INTERFACE, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_PRINTER, + .bInterfaceSubClass = 1, /* Printer Sub-Class */ + .bInterfaceProtocol = 2, /* Bi-Directional */ + .iInterface = 0 +}; + +static struct usb_endpoint_descriptor fs_ep_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK +}; + +static struct usb_endpoint_descriptor fs_ep_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK +}; + +static struct usb_descriptor_header *fs_printer_function[] = { + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &fs_ep_in_desc, + (struct usb_descriptor_header *) &fs_ep_out_desc, + NULL +}; + +/* + * usb 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + */ + +static struct usb_endpoint_descriptor hs_ep_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512) +}; + +static struct usb_endpoint_descriptor hs_ep_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512) +}; + +static struct usb_qualifier_descriptor dev_qualifier = { + .bLength = sizeof(dev_qualifier), + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_PRINTER, + .bNumConfigurations = 1 +}; + +static struct usb_descriptor_header *hs_printer_function[] = { + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &hs_ep_in_desc, + (struct usb_descriptor_header *) &hs_ep_out_desc, + NULL +}; + +/* + * Added endpoint descriptors for 3.0 devices + */ + +static struct usb_endpoint_descriptor ss_ep_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = { + .bLength = sizeof(ss_ep_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_endpoint_descriptor ss_ep_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = { + .bLength = sizeof(ss_ep_out_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_descriptor_header *ss_printer_function[] = { + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &ss_ep_in_desc, + (struct usb_descriptor_header *) &ss_ep_in_comp_desc, + (struct usb_descriptor_header *) &ss_ep_out_desc, + (struct usb_descriptor_header *) &ss_ep_out_comp_desc, + NULL +}; + +/* maxpacket and other transfer characteristics vary by speed. */ +static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *fs, + struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *ss) +{ + switch (gadget->speed) { + case USB_SPEED_SUPER: + return ss; + case USB_SPEED_HIGH: + return hs; + default: + return fs; + } +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, gfp_flags); + + if (req != NULL) { + req->length = len; + req->buf = kmalloc(len, gfp_flags); + if (req->buf == NULL) { + usb_ep_free_request(ep, req); + return NULL; + } + } + + return req; +} + +static void +printer_req_free(struct usb_ep *ep, struct usb_request *req) +{ + if (ep != NULL && req != NULL) { + kfree(req->buf); + usb_ep_free_request(ep, req); + } +} + +/*-------------------------------------------------------------------------*/ + +static void rx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct printer_dev *dev = ep->driver_data; + int status = req->status; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + + list_del_init(&req->list); /* Remode from Active List */ + + switch (status) { + + /* normal completion */ + case 0: + if (req->actual > 0) { + list_add_tail(&req->list, &dev->rx_buffers); + DBG(dev, "G_Printer : rx length %d\n", req->actual); + } else { + list_add(&req->list, &dev->rx_reqs); + } + break; + + /* software-driven interface shutdown */ + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + VDBG(dev, "rx shutdown, code %d\n", status); + list_add(&req->list, &dev->rx_reqs); + break; + + /* for hardware automagic (such as pxa) */ + case -ECONNABORTED: /* endpoint reset */ + DBG(dev, "rx %s reset\n", ep->name); + list_add(&req->list, &dev->rx_reqs); + break; + + /* data overrun */ + case -EOVERFLOW: + /* FALLTHROUGH */ + + default: + DBG(dev, "rx status %d\n", status); + list_add(&req->list, &dev->rx_reqs); + break; + } + + wake_up_interruptible(&dev->rx_wait); + spin_unlock_irqrestore(&dev->lock, flags); +} + +static void tx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct printer_dev *dev = ep->driver_data; + + switch (req->status) { + default: + VDBG(dev, "tx err %d\n", req->status); + /* FALLTHROUGH */ + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + break; + case 0: + break; + } + + spin_lock(&dev->lock); + /* Take the request struct off the active list and put it on the + * free list. + */ + list_del_init(&req->list); + list_add(&req->list, &dev->tx_reqs); + wake_up_interruptible(&dev->tx_wait); + if (likely(list_empty(&dev->tx_reqs_active))) + wake_up_interruptible(&dev->tx_flush_wait); + + spin_unlock(&dev->lock); +} + +/*-------------------------------------------------------------------------*/ + +static int +printer_open(struct inode *inode, struct file *fd) +{ + struct printer_dev *dev; + unsigned long flags; + int ret = -EBUSY; + + dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); + + spin_lock_irqsave(&dev->lock, flags); + + if (!dev->printer_cdev_open) { + dev->printer_cdev_open = 1; + fd->private_data = dev; + ret = 0; + /* Change the printer status to show that it's on-line. */ + dev->printer_status |= PRINTER_SELECTED; + } + + spin_unlock_irqrestore(&dev->lock, flags); + + DBG(dev, "printer_open returned %x\n", ret); + return ret; +} + +static int +printer_close(struct inode *inode, struct file *fd) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + dev->printer_cdev_open = 0; + fd->private_data = NULL; + /* Change printer status to show that the printer is off-line. */ + dev->printer_status &= ~PRINTER_SELECTED; + spin_unlock_irqrestore(&dev->lock, flags); + + DBG(dev, "printer_close\n"); + + return 0; +} + +/* This function must be called with interrupts turned off. */ +static void +setup_rx_reqs(struct printer_dev *dev) +{ + struct usb_request *req; + + while (likely(!list_empty(&dev->rx_reqs))) { + int error; + + req = container_of(dev->rx_reqs.next, + struct usb_request, list); + list_del_init(&req->list); + + /* The USB Host sends us whatever amount of data it wants to + * so we always set the length field to the full USB_BUFSIZE. + * If the amount of data is more than the read() caller asked + * for it will be stored in the request buffer until it is + * asked for by read(). + */ + req->length = USB_BUFSIZE; + req->complete = rx_complete; + + /* here, we unlock, and only unlock, to avoid deadlock. */ + spin_unlock(&dev->lock); + error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); + spin_lock(&dev->lock); + if (error) { + DBG(dev, "rx submit --> %d\n", error); + list_add(&req->list, &dev->rx_reqs); + break; + } + /* if the req is empty, then add it into dev->rx_reqs_active. */ + else if (list_empty(&req->list)) + list_add(&req->list, &dev->rx_reqs_active); + } +} + +static ssize_t +printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + size_t size; + size_t bytes_copied; + struct usb_request *req; + /* This is a pointer to the current USB rx request. */ + struct usb_request *current_rx_req; + /* This is the number of bytes in the current rx buffer. */ + size_t current_rx_bytes; + /* This is a pointer to the current rx buffer. */ + u8 *current_rx_buf; + + if (len == 0) + return -EINVAL; + + DBG(dev, "printer_read trying to read %d bytes\n", (int)len); + + mutex_lock(&dev->lock_printer_io); + spin_lock_irqsave(&dev->lock, flags); + + /* We will use this flag later to check if a printer reset happened + * after we turn interrupts back on. + */ + dev->reset_printer = 0; + + setup_rx_reqs(dev); + + bytes_copied = 0; + current_rx_req = dev->current_rx_req; + current_rx_bytes = dev->current_rx_bytes; + current_rx_buf = dev->current_rx_buf; + dev->current_rx_req = NULL; + dev->current_rx_bytes = 0; + dev->current_rx_buf = NULL; + + /* Check if there is any data in the read buffers. Please note that + * current_rx_bytes is the number of bytes in the current rx buffer. + * If it is zero then check if there are any other rx_buffers that + * are on the completed list. We are only out of data if all rx + * buffers are empty. + */ + if ((current_rx_bytes == 0) && + (likely(list_empty(&dev->rx_buffers)))) { + /* Turn interrupts back on before sleeping. */ + spin_unlock_irqrestore(&dev->lock, flags); + + /* + * If no data is available check if this is a NON-Blocking + * call or not. + */ + if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + /* Sleep until data is available */ + wait_event_interruptible(dev->rx_wait, + (likely(!list_empty(&dev->rx_buffers)))); + spin_lock_irqsave(&dev->lock, flags); + } + + /* We have data to return then copy it to the caller's buffer.*/ + while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers))) + && len) { + if (current_rx_bytes == 0) { + req = container_of(dev->rx_buffers.next, + struct usb_request, list); + list_del_init(&req->list); + + if (req->actual && req->buf) { + current_rx_req = req; + current_rx_bytes = req->actual; + current_rx_buf = req->buf; + } else { + list_add(&req->list, &dev->rx_reqs); + continue; + } + } + + /* Don't leave irqs off while doing memory copies */ + spin_unlock_irqrestore(&dev->lock, flags); + + if (len > current_rx_bytes) + size = current_rx_bytes; + else + size = len; + + size -= copy_to_user(buf, current_rx_buf, size); + bytes_copied += size; + len -= size; + buf += size; + + spin_lock_irqsave(&dev->lock, flags); + + /* We've disconnected or reset so return. */ + if (dev->reset_printer) { + list_add(¤t_rx_req->list, &dev->rx_reqs); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + /* If we not returning all the data left in this RX request + * buffer then adjust the amount of data left in the buffer. + * Othewise if we are done with this RX request buffer then + * requeue it to get any incoming data from the USB host. + */ + if (size < current_rx_bytes) { + current_rx_bytes -= size; + current_rx_buf += size; + } else { + list_add(¤t_rx_req->list, &dev->rx_reqs); + current_rx_bytes = 0; + current_rx_buf = NULL; + current_rx_req = NULL; + } + } + + dev->current_rx_req = current_rx_req; + dev->current_rx_bytes = current_rx_bytes; + dev->current_rx_buf = current_rx_buf; + + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + + DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); + + if (bytes_copied) + return bytes_copied; + else + return -EAGAIN; +} + +static ssize_t +printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + size_t size; /* Amount of data in a TX request. */ + size_t bytes_copied = 0; + struct usb_request *req; + + DBG(dev, "printer_write trying to send %d bytes\n", (int)len); + + if (len == 0) + return -EINVAL; + + mutex_lock(&dev->lock_printer_io); + spin_lock_irqsave(&dev->lock, flags); + + /* Check if a printer reset happens while we have interrupts on */ + dev->reset_printer = 0; + + /* Check if there is any available write buffers */ + if (likely(list_empty(&dev->tx_reqs))) { + /* Turn interrupts back on before sleeping. */ + spin_unlock_irqrestore(&dev->lock, flags); + + /* + * If write buffers are available check if this is + * a NON-Blocking call or not. + */ + if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + /* Sleep until a write buffer is available */ + wait_event_interruptible(dev->tx_wait, + (likely(!list_empty(&dev->tx_reqs)))); + spin_lock_irqsave(&dev->lock, flags); + } + + while (likely(!list_empty(&dev->tx_reqs)) && len) { + + if (len > USB_BUFSIZE) + size = USB_BUFSIZE; + else + size = len; + + req = container_of(dev->tx_reqs.next, struct usb_request, + list); + list_del_init(&req->list); + + req->complete = tx_complete; + req->length = size; + + /* Check if we need to send a zero length packet. */ + if (len > size) + /* They will be more TX requests so no yet. */ + req->zero = 0; + else + /* If the data amount is not a multiple of the + * maxpacket size then send a zero length packet. + */ + req->zero = ((len % dev->in_ep->maxpacket) == 0); + + /* Don't leave irqs off while doing memory copies */ + spin_unlock_irqrestore(&dev->lock, flags); + + if (copy_from_user(req->buf, buf, size)) { + list_add(&req->list, &dev->tx_reqs); + mutex_unlock(&dev->lock_printer_io); + return bytes_copied; + } + + bytes_copied += size; + len -= size; + buf += size; + + spin_lock_irqsave(&dev->lock, flags); + + /* We've disconnected or reset so free the req and buffer */ + if (dev->reset_printer) { + list_add(&req->list, &dev->tx_reqs); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { + list_add(&req->list, &dev->tx_reqs); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + return -EAGAIN; + } + + list_add(&req->list, &dev->tx_reqs_active); + + } + + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + + DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); + + if (bytes_copied) + return bytes_copied; + else + return -EAGAIN; +} + +static int +printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync) +{ + struct printer_dev *dev = fd->private_data; + struct inode *inode = file_inode(fd); + unsigned long flags; + int tx_list_empty; + + mutex_lock(&inode->i_mutex); + spin_lock_irqsave(&dev->lock, flags); + tx_list_empty = (likely(list_empty(&dev->tx_reqs))); + spin_unlock_irqrestore(&dev->lock, flags); + + if (!tx_list_empty) { + /* Sleep until all data has been sent */ + wait_event_interruptible(dev->tx_flush_wait, + (likely(list_empty(&dev->tx_reqs_active)))); + } + mutex_unlock(&inode->i_mutex); + + return 0; +} + +static unsigned int +printer_poll(struct file *fd, poll_table *wait) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + int status = 0; + + mutex_lock(&dev->lock_printer_io); + spin_lock_irqsave(&dev->lock, flags); + setup_rx_reqs(dev); + spin_unlock_irqrestore(&dev->lock, flags); + mutex_unlock(&dev->lock_printer_io); + + poll_wait(fd, &dev->rx_wait, wait); + poll_wait(fd, &dev->tx_wait, wait); + + spin_lock_irqsave(&dev->lock, flags); + if (likely(!list_empty(&dev->tx_reqs))) + status |= POLLOUT | POLLWRNORM; + + if (likely(dev->current_rx_bytes) || + likely(!list_empty(&dev->rx_buffers))) + status |= POLLIN | POLLRDNORM; + + spin_unlock_irqrestore(&dev->lock, flags); + + return status; +} + +static long +printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) +{ + struct printer_dev *dev = fd->private_data; + unsigned long flags; + int status = 0; + + DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg); + + /* handle ioctls */ + + spin_lock_irqsave(&dev->lock, flags); + + switch (code) { + case GADGET_GET_PRINTER_STATUS: + status = (int)dev->printer_status; + break; + case GADGET_SET_PRINTER_STATUS: + dev->printer_status = (u8)arg; + break; + default: + /* could not handle ioctl */ + DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n", + code); + status = -ENOTTY; + } + + spin_unlock_irqrestore(&dev->lock, flags); + + return status; +} + +/* used after endpoint configuration */ +static const struct file_operations printer_io_operations = { + .owner = THIS_MODULE, + .open = printer_open, + .read = printer_read, + .write = printer_write, + .fsync = printer_fsync, + .poll = printer_poll, + .unlocked_ioctl = printer_ioctl, + .release = printer_close, + .llseek = noop_llseek, +}; + +/*-------------------------------------------------------------------------*/ + +static int +set_printer_interface(struct printer_dev *dev) +{ + int result = 0; + + dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc, + &ss_ep_in_desc); + dev->in_ep->driver_data = dev; + + dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc, + &hs_ep_out_desc, &ss_ep_out_desc); + dev->out_ep->driver_data = dev; + + result = usb_ep_enable(dev->in_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); + goto done; + } + + result = usb_ep_enable(dev->out_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); + goto done; + } + +done: + /* on error, disable any endpoints */ + if (result != 0) { + (void) usb_ep_disable(dev->in_ep); + (void) usb_ep_disable(dev->out_ep); + dev->in_ep->desc = NULL; + dev->out_ep->desc = NULL; + } + + /* caller is responsible for cleanup on error */ + return result; +} + +static void printer_reset_interface(struct printer_dev *dev) +{ + if (dev->interface < 0) + return; + + DBG(dev, "%s\n", __func__); + + if (dev->in_ep->desc) + usb_ep_disable(dev->in_ep); + + if (dev->out_ep->desc) + usb_ep_disable(dev->out_ep); + + dev->in_ep->desc = NULL; + dev->out_ep->desc = NULL; + dev->interface = -1; +} + +/* Change our operational Interface. */ +static int set_interface(struct printer_dev *dev, unsigned number) +{ + int result = 0; + + /* Free the current interface */ + printer_reset_interface(dev); + + result = set_printer_interface(dev); + if (result) + printer_reset_interface(dev); + else + dev->interface = number; + + if (!result) + INFO(dev, "Using interface %x\n", number); + + return result; +} + +static void printer_soft_reset(struct printer_dev *dev) +{ + struct usb_request *req; + + INFO(dev, "Received Printer Reset Request\n"); + + if (usb_ep_disable(dev->in_ep)) + DBG(dev, "Failed to disable USB in_ep\n"); + if (usb_ep_disable(dev->out_ep)) + DBG(dev, "Failed to disable USB out_ep\n"); + + if (dev->current_rx_req != NULL) { + list_add(&dev->current_rx_req->list, &dev->rx_reqs); + dev->current_rx_req = NULL; + } + dev->current_rx_bytes = 0; + dev->current_rx_buf = NULL; + dev->reset_printer = 1; + + while (likely(!(list_empty(&dev->rx_buffers)))) { + req = container_of(dev->rx_buffers.next, struct usb_request, + list); + list_del_init(&req->list); + list_add(&req->list, &dev->rx_reqs); + } + + while (likely(!(list_empty(&dev->rx_reqs_active)))) { + req = container_of(dev->rx_buffers.next, struct usb_request, + list); + list_del_init(&req->list); + list_add(&req->list, &dev->rx_reqs); + } + + while (likely(!(list_empty(&dev->tx_reqs_active)))) { + req = container_of(dev->tx_reqs_active.next, + struct usb_request, list); + list_del_init(&req->list); + list_add(&req->list, &dev->tx_reqs); + } + + if (usb_ep_enable(dev->in_ep)) + DBG(dev, "Failed to enable USB in_ep\n"); + if (usb_ep_enable(dev->out_ep)) + DBG(dev, "Failed to enable USB out_ep\n"); + + wake_up_interruptible(&dev->rx_wait); + wake_up_interruptible(&dev->tx_wait); + wake_up_interruptible(&dev->tx_flush_wait); +} + +/*-------------------------------------------------------------------------*/ + +static bool gprinter_req_match(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct printer_dev *dev = func_to_printer(f); + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE || + (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS) + return false; + + switch (ctrl->bRequest) { + case GET_DEVICE_ID: + w_index >>= 8; + if (w_length <= PNP_STRING_LEN && + (USB_DIR_IN & ctrl->bRequestType)) + break; + return false; + case GET_PORT_STATUS: + if (!w_value && w_length == 1 && + (USB_DIR_IN & ctrl->bRequestType)) + break; + return false; + case SOFT_RESET: + if (!w_value && !w_length && + !(USB_DIR_IN & ctrl->bRequestType)) + break; + /* fall through */ + default: + return false; + } + return w_index == dev->interface; +} + +/* + * The setup() callback implements all the ep0 functionality that's not + * handled lower down. + */ +static int printer_func_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct printer_dev *dev = func_to_printer(f); + struct usb_composite_dev *cdev = f->config->cdev; + struct usb_request *req = cdev->req; + int value = -EOPNOTSUPP; + u16 wIndex = le16_to_cpu(ctrl->wIndex); + u16 wValue = le16_to_cpu(ctrl->wValue); + u16 wLength = le16_to_cpu(ctrl->wLength); + + DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); + + switch (ctrl->bRequestType&USB_TYPE_MASK) { + case USB_TYPE_CLASS: + switch (ctrl->bRequest) { + case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */ + /* Only one printer interface is supported. */ + if ((wIndex>>8) != dev->interface) + break; + + value = (dev->pnp_string[0] << 8) | dev->pnp_string[1]; + memcpy(req->buf, dev->pnp_string, value); + DBG(dev, "1284 PNP String: %x %s\n", value, + &dev->pnp_string[2]); + break; + + case GET_PORT_STATUS: /* Get Port Status */ + /* Only one printer interface is supported. */ + if (wIndex != dev->interface) + break; + + *(u8 *)req->buf = dev->printer_status; + value = min_t(u16, wLength, 1); + break; + + case SOFT_RESET: /* Soft Reset */ + /* Only one printer interface is supported. */ + if (wIndex != dev->interface) + break; + + printer_soft_reset(dev); + + value = 0; + break; + + default: + goto unknown; + } + break; + + default: +unknown: + VDBG(dev, + "unknown ctrl req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + /* host either stalls (value < 0) or reports success */ + if (value >= 0) { + req->length = value; + req->zero = value < wLength; + value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + ERROR(dev, "%s:%d Error!\n", __func__, __LINE__); + req->status = 0; + } + } + return value; +} + +static int printer_func_bind(struct usb_configuration *c, + struct usb_function *f) +{ + struct usb_gadget *gadget = c->cdev->gadget; + struct printer_dev *dev = func_to_printer(f); + struct device *pdev; + struct usb_composite_dev *cdev = c->cdev; + struct usb_ep *in_ep; + struct usb_ep *out_ep = NULL; + struct usb_request *req; + dev_t devt; + int id; + int ret; + u32 i; + + id = usb_interface_id(c, f); + if (id < 0) + return id; + intf_desc.bInterfaceNumber = id; + + /* finish hookup to lower layer ... */ + dev->gadget = gadget; + + /* all we really need is bulk IN/OUT */ + in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc); + if (!in_ep) { +autoconf_fail: + dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n", + cdev->gadget->name); + return -ENODEV; + } + in_ep->driver_data = in_ep; /* claim */ + + out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc); + if (!out_ep) + goto autoconf_fail; + out_ep->driver_data = out_ep; /* claim */ + + /* assumes that all endpoints are dual-speed */ + hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; + hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; + ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + + ret = usb_assign_descriptors(f, fs_printer_function, + hs_printer_function, ss_printer_function); + if (ret) + return ret; + + dev->in_ep = in_ep; + dev->out_ep = out_ep; + + ret = -ENOMEM; + for (i = 0; i < dev->q_len; i++) { + req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); + if (!req) + goto fail_tx_reqs; + list_add(&req->list, &dev->tx_reqs); + } + + for (i = 0; i < dev->q_len; i++) { + req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL); + if (!req) + goto fail_rx_reqs; + list_add(&req->list, &dev->rx_reqs); + } + + /* Setup the sysfs files for the printer gadget. */ + devt = MKDEV(major, dev->minor); + pdev = device_create(usb_gadget_class, NULL, devt, + NULL, "g_printer%d", dev->minor); + if (IS_ERR(pdev)) { + ERROR(dev, "Failed to create device: g_printer\n"); + ret = PTR_ERR(pdev); + goto fail_rx_reqs; + } + + /* + * Register a character device as an interface to a user mode + * program that handles the printer specific functionality. + */ + cdev_init(&dev->printer_cdev, &printer_io_operations); + dev->printer_cdev.owner = THIS_MODULE; + ret = cdev_add(&dev->printer_cdev, devt, 1); + if (ret) { + ERROR(dev, "Failed to open char device\n"); + goto fail_cdev_add; + } + + return 0; + +fail_cdev_add: + device_destroy(usb_gadget_class, devt); + +fail_rx_reqs: + while (!list_empty(&dev->rx_reqs)) { + req = container_of(dev->rx_reqs.next, struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->out_ep, req); + } + +fail_tx_reqs: + while (!list_empty(&dev->tx_reqs)) { + req = container_of(dev->tx_reqs.next, struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->in_ep, req); + } + + return ret; + +} + +static int printer_func_set_alt(struct usb_function *f, + unsigned intf, unsigned alt) +{ + struct printer_dev *dev = func_to_printer(f); + int ret = -ENOTSUPP; + + if (!alt) + ret = set_interface(dev, intf); + + return ret; +} + +static void printer_func_disable(struct usb_function *f) +{ + struct printer_dev *dev = func_to_printer(f); + unsigned long flags; + + DBG(dev, "%s\n", __func__); + + spin_lock_irqsave(&dev->lock, flags); + printer_reset_interface(dev); + spin_unlock_irqrestore(&dev->lock, flags); +} + +static inline struct f_printer_opts +*to_f_printer_opts(struct config_item *item) +{ + return container_of(to_config_group(item), struct f_printer_opts, + func_inst.group); +} + +CONFIGFS_ATTR_STRUCT(f_printer_opts); +CONFIGFS_ATTR_OPS(f_printer_opts); + +static void printer_attr_release(struct config_item *item) +{ + struct f_printer_opts *opts = to_f_printer_opts(item); + + usb_put_function_instance(&opts->func_inst); +} + +static struct configfs_item_operations printer_item_ops = { + .release = printer_attr_release, + .show_attribute = f_printer_opts_attr_show, + .store_attribute = f_printer_opts_attr_store, +}; + +static ssize_t f_printer_opts_pnp_string_show(struct f_printer_opts *opts, + char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = strlcpy(page, opts->pnp_string + 2, PNP_STRING_LEN - 2); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t f_printer_opts_pnp_string_store(struct f_printer_opts *opts, + const char *page, size_t len) +{ + int result, l; + + mutex_lock(&opts->lock); + result = strlcpy(opts->pnp_string + 2, page, PNP_STRING_LEN - 2); + l = strlen(opts->pnp_string + 2) + 2; + opts->pnp_string[0] = (l >> 8) & 0xFF; + opts->pnp_string[1] = l & 0xFF; + mutex_unlock(&opts->lock); + + return result; +} + +static struct f_printer_opts_attribute f_printer_opts_pnp_string = + __CONFIGFS_ATTR(pnp_string, S_IRUGO | S_IWUSR, + f_printer_opts_pnp_string_show, + f_printer_opts_pnp_string_store); + +static ssize_t f_printer_opts_q_len_show(struct f_printer_opts *opts, + char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = sprintf(page, "%d\n", opts->q_len); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t f_printer_opts_q_len_store(struct f_printer_opts *opts, + const char *page, size_t len) +{ + int ret; + u16 num; + + mutex_lock(&opts->lock); + if (opts->refcnt) { + ret = -EBUSY; + goto end; + } + + ret = kstrtou16(page, 0, &num); + if (ret) + goto end; + + opts->q_len = (unsigned)num; + ret = len; +end: + mutex_unlock(&opts->lock); + return ret; +} + +static struct f_printer_opts_attribute f_printer_opts_q_len = + __CONFIGFS_ATTR(q_len, S_IRUGO | S_IWUSR, f_printer_opts_q_len_show, + f_printer_opts_q_len_store); + +static struct configfs_attribute *printer_attrs[] = { + &f_printer_opts_pnp_string.attr, + &f_printer_opts_q_len.attr, + NULL, +}; + +static struct config_item_type printer_func_type = { + .ct_item_ops = &printer_item_ops, + .ct_attrs = printer_attrs, + .ct_owner = THIS_MODULE, +}; + +static inline int gprinter_get_minor(void) +{ + int ret; + + ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL); + if (ret >= PRINTER_MINORS) { + ida_simple_remove(&printer_ida, ret); + ret = -ENODEV; + } + + return ret; +} + +static inline void gprinter_put_minor(int minor) +{ + ida_simple_remove(&printer_ida, minor); +} + +static int gprinter_setup(int); +static void gprinter_cleanup(void); + +static void gprinter_free_inst(struct usb_function_instance *f) +{ + struct f_printer_opts *opts; + + opts = container_of(f, struct f_printer_opts, func_inst); + + mutex_lock(&printer_ida_lock); + + gprinter_put_minor(opts->minor); + if (idr_is_empty(&printer_ida.idr)) + gprinter_cleanup(); + + mutex_unlock(&printer_ida_lock); + + kfree(opts); +} + +static struct usb_function_instance *gprinter_alloc_inst(void) +{ + struct f_printer_opts *opts; + struct usb_function_instance *ret; + int status = 0; + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + + mutex_init(&opts->lock); + opts->func_inst.free_func_inst = gprinter_free_inst; + ret = &opts->func_inst; + + mutex_lock(&printer_ida_lock); + + if (idr_is_empty(&printer_ida.idr)) { + status = gprinter_setup(PRINTER_MINORS); + if (status) { + ret = ERR_PTR(status); + kfree(opts); + goto unlock; + } + } + + opts->minor = gprinter_get_minor(); + if (opts->minor < 0) { + ret = ERR_PTR(opts->minor); + kfree(opts); + if (idr_is_empty(&printer_ida.idr)) + gprinter_cleanup(); + goto unlock; + } + config_group_init_type_name(&opts->func_inst.group, "", + &printer_func_type); + +unlock: + mutex_unlock(&printer_ida_lock); + return ret; +} + +static void gprinter_free(struct usb_function *f) +{ + struct printer_dev *dev = func_to_printer(f); + struct f_printer_opts *opts; + + opts = container_of(f->fi, struct f_printer_opts, func_inst); + kfree(dev); + mutex_lock(&opts->lock); + --opts->refcnt; + mutex_unlock(&opts->lock); +} + +static void printer_func_unbind(struct usb_configuration *c, + struct usb_function *f) +{ + struct printer_dev *dev; + struct usb_request *req; + + dev = func_to_printer(f); + + device_destroy(usb_gadget_class, MKDEV(major, dev->minor)); + + /* Remove Character Device */ + cdev_del(&dev->printer_cdev); + + /* we must already have been disconnected ... no i/o may be active */ + WARN_ON(!list_empty(&dev->tx_reqs_active)); + WARN_ON(!list_empty(&dev->rx_reqs_active)); + + /* Free all memory for this driver. */ + while (!list_empty(&dev->tx_reqs)) { + req = container_of(dev->tx_reqs.next, struct usb_request, + list); + list_del(&req->list); + printer_req_free(dev->in_ep, req); + } + + if (dev->current_rx_req != NULL) + printer_req_free(dev->out_ep, dev->current_rx_req); + + while (!list_empty(&dev->rx_reqs)) { + req = container_of(dev->rx_reqs.next, + struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->out_ep, req); + } + + while (!list_empty(&dev->rx_buffers)) { + req = container_of(dev->rx_buffers.next, + struct usb_request, list); + list_del(&req->list); + printer_req_free(dev->out_ep, req); + } + usb_free_all_descriptors(f); +} + +static struct usb_function *gprinter_alloc(struct usb_function_instance *fi) +{ + struct printer_dev *dev; + struct f_printer_opts *opts; + + opts = container_of(fi, struct f_printer_opts, func_inst); + + mutex_lock(&opts->lock); + if (opts->minor >= minors) { + mutex_unlock(&opts->lock); + return ERR_PTR(-ENOENT); + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + mutex_unlock(&opts->lock); + return ERR_PTR(-ENOMEM); + } + + ++opts->refcnt; + dev->minor = opts->minor; + dev->pnp_string = opts->pnp_string; + dev->q_len = opts->q_len; + mutex_unlock(&opts->lock); + + dev->function.name = "printer"; + dev->function.bind = printer_func_bind; + dev->function.setup = printer_func_setup; + dev->function.unbind = printer_func_unbind; + dev->function.set_alt = printer_func_set_alt; + dev->function.disable = printer_func_disable; + dev->function.req_match = gprinter_req_match; + dev->function.free_func = gprinter_free; + + INIT_LIST_HEAD(&dev->tx_reqs); + INIT_LIST_HEAD(&dev->rx_reqs); + INIT_LIST_HEAD(&dev->rx_buffers); + INIT_LIST_HEAD(&dev->tx_reqs_active); + INIT_LIST_HEAD(&dev->rx_reqs_active); + + spin_lock_init(&dev->lock); + mutex_init(&dev->lock_printer_io); + init_waitqueue_head(&dev->rx_wait); + init_waitqueue_head(&dev->tx_wait); + init_waitqueue_head(&dev->tx_flush_wait); + + dev->interface = -1; + dev->printer_cdev_open = 0; + dev->printer_status = PRINTER_NOT_ERROR; + dev->current_rx_req = NULL; + dev->current_rx_bytes = 0; + dev->current_rx_buf = NULL; + + return &dev->function; +} + +DECLARE_USB_FUNCTION_INIT(printer, gprinter_alloc_inst, gprinter_alloc); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Craig Nadler"); + +static int gprinter_setup(int count) +{ + int status; + dev_t devt; + + usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); + if (IS_ERR(usb_gadget_class)) { + status = PTR_ERR(usb_gadget_class); + usb_gadget_class = NULL; + pr_err("unable to create usb_gadget class %d\n", status); + return status; + } + + status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget"); + if (status) { + pr_err("alloc_chrdev_region %d\n", status); + class_destroy(usb_gadget_class); + usb_gadget_class = NULL; + return status; + } + + major = MAJOR(devt); + minors = count; + + return status; +} + +static void gprinter_cleanup(void) +{ + if (major) { + unregister_chrdev_region(MKDEV(major, 0), minors); + major = minors = 0; + } + class_destroy(usb_gadget_class); + usb_gadget_class = NULL; +} diff --git a/drivers/usb/gadget/function/f_rndis.c b/drivers/usb/gadget/function/f_rndis.c index 829edf878dac..32985dade838 100644 --- a/drivers/usb/gadget/function/f_rndis.c +++ b/drivers/usb/gadget/function/f_rndis.c @@ -76,7 +76,7 @@ struct f_rndis { u8 ethaddr[ETH_ALEN]; u32 vendorID; const char *manufacturer; - int config; + struct rndis_params *params; struct usb_ep *notify; struct usb_request *notify_req; @@ -453,7 +453,7 @@ static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req) /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */ // spin_lock(&dev->lock); - status = rndis_msg_parser(rndis->config, (u8 *) req->buf); + status = rndis_msg_parser(rndis->params, (u8 *) req->buf); if (status < 0) pr_err("RNDIS command error %d, %d/%d\n", status, req->actual, req->length); @@ -499,12 +499,12 @@ rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) u32 n; /* return the result */ - buf = rndis_get_next_response(rndis->config, &n); + buf = rndis_get_next_response(rndis->params, &n); if (buf) { memcpy(req->buf, buf, n); req->complete = rndis_response_complete; req->context = rndis; - rndis_free_response(rndis->config, buf); + rndis_free_response(rndis->params, buf); value = n; } /* else stalls ... spec says to avoid that */ @@ -597,7 +597,7 @@ static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt) if (IS_ERR(net)) return PTR_ERR(net); - rndis_set_param_dev(rndis->config, net, + rndis_set_param_dev(rndis->params, net, &rndis->port.cdc_filter); } else goto fail; @@ -617,7 +617,7 @@ static void rndis_disable(struct usb_function *f) DBG(cdev, "rndis deactivated\n"); - rndis_uninit(rndis->config); + rndis_uninit(rndis->params); gether_disconnect(&rndis->port); usb_ep_disable(rndis->notify); @@ -640,9 +640,9 @@ static void rndis_open(struct gether *geth) DBG(cdev, "%s\n", __func__); - rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, + rndis_set_param_medium(rndis->params, RNDIS_MEDIUM_802_3, bitrate(cdev->gadget) / 100); - rndis_signal_connect(rndis->config); + rndis_signal_connect(rndis->params); } static void rndis_close(struct gether *geth) @@ -651,8 +651,8 @@ static void rndis_close(struct gether *geth) DBG(geth->func.config->cdev, "%s\n", __func__); - rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); - rndis_signal_disconnect(rndis->config); + rndis_set_param_medium(rndis->params, RNDIS_MEDIUM_802_3, 0); + rndis_signal_disconnect(rndis->params); } /*-------------------------------------------------------------------------*/ @@ -796,11 +796,11 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) rndis->port.open = rndis_open; rndis->port.close = rndis_close; - rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); - rndis_set_host_mac(rndis->config, rndis->ethaddr); + rndis_set_param_medium(rndis->params, RNDIS_MEDIUM_802_3, 0); + rndis_set_host_mac(rndis->params, rndis->ethaddr); if (rndis->manufacturer && rndis->vendorID && - rndis_set_param_vendor(rndis->config, rndis->vendorID, + rndis_set_param_vendor(rndis->params, rndis->vendorID, rndis->manufacturer)) { status = -EINVAL; goto fail_free_descs; @@ -944,7 +944,7 @@ static void rndis_free(struct usb_function *f) struct f_rndis_opts *opts; rndis = func_to_rndis(f); - rndis_deregister(rndis->config); + rndis_deregister(rndis->params); opts = container_of(f->fi, struct f_rndis_opts, func_inst); kfree(rndis); mutex_lock(&opts->lock); @@ -968,7 +968,7 @@ static struct usb_function *rndis_alloc(struct usb_function_instance *fi) { struct f_rndis *rndis; struct f_rndis_opts *opts; - int status; + struct rndis_params *params; /* allocate and initialize one new instance */ rndis = kzalloc(sizeof(*rndis), GFP_KERNEL); @@ -1002,36 +1002,16 @@ static struct usb_function *rndis_alloc(struct usb_function_instance *fi) rndis->port.func.disable = rndis_disable; rndis->port.func.free_func = rndis_free; - status = rndis_register(rndis_response_available, rndis); - if (status < 0) { + params = rndis_register(rndis_response_available, rndis); + if (IS_ERR(params)) { kfree(rndis); - return ERR_PTR(status); + return ERR_CAST(params); } - rndis->config = status; + rndis->params = params; return &rndis->port.func; } -DECLARE_USB_FUNCTION(rndis, rndis_alloc_inst, rndis_alloc); - -static int __init rndis_mod_init(void) -{ - int ret; - - ret = rndis_init(); - if (ret) - return ret; - - return usb_function_register(&rndisusb_func); -} -module_init(rndis_mod_init); - -static void __exit rndis_mod_exit(void) -{ - usb_function_unregister(&rndisusb_func); - rndis_exit(); -} -module_exit(rndis_mod_exit); - +DECLARE_USB_FUNCTION_INIT(rndis, rndis_alloc_inst, rndis_alloc); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Brownell"); diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c index 9719abfb6145..7856b3394494 100644 --- a/drivers/usb/gadget/function/f_uac1.c +++ b/drivers/usb/gadget/function/f_uac1.c @@ -588,7 +588,10 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt) if (intf == 1) { if (alt == 1) { - config_ep_by_speed(cdev->gadget, f, out_ep); + err = config_ep_by_speed(cdev->gadget, f, out_ep); + if (err) + return err; + usb_ep_enable(out_ep); out_ep->driver_data = audio; audio->copy_buf = f_audio_buffer_alloc(audio_buf_size); diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 6d3eb8b00a48..531861547253 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -1162,14 +1162,14 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt) factor = 1000; } else { ep_desc = &hs_epin_desc; - factor = 125; + factor = 8000; } /* pre-compute some values for iso_complete() */ uac2->p_framesize = opts->p_ssize * num_channels(opts->p_chmask); rate = opts->p_srate * uac2->p_framesize; - uac2->p_interval = (1 << (ep_desc->bInterval - 1)) * factor; + uac2->p_interval = factor / (1 << (ep_desc->bInterval - 1)); uac2->p_pktsize = min_t(unsigned int, rate / uac2->p_interval, prm->max_psize); diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 76891adfba7a..cf0df8fbba89 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -222,7 +222,7 @@ uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req) v4l2_event.type = UVC_EVENT_DATA; uvc_event->data.length = req->actual; memcpy(&uvc_event->data.data, req->buf, req->actual); - v4l2_event_queue(uvc->vdev, &v4l2_event); + v4l2_event_queue(&uvc->vdev, &v4l2_event); } } @@ -256,7 +256,7 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) memset(&v4l2_event, 0, sizeof(v4l2_event)); v4l2_event.type = UVC_EVENT_SETUP; memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req)); - v4l2_event_queue(uvc->vdev, &v4l2_event); + v4l2_event_queue(&uvc->vdev, &v4l2_event); return 0; } @@ -315,7 +315,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt) memset(&v4l2_event, 0, sizeof(v4l2_event)); v4l2_event.type = UVC_EVENT_CONNECT; uvc_event->speed = cdev->gadget->speed; - v4l2_event_queue(uvc->vdev, &v4l2_event); + v4l2_event_queue(&uvc->vdev, &v4l2_event); uvc->state = UVC_STATE_CONNECTED; } @@ -343,7 +343,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt) memset(&v4l2_event, 0, sizeof(v4l2_event)); v4l2_event.type = UVC_EVENT_STREAMOFF; - v4l2_event_queue(uvc->vdev, &v4l2_event); + v4l2_event_queue(&uvc->vdev, &v4l2_event); uvc->state = UVC_STATE_CONNECTED; return 0; @@ -370,7 +370,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt) memset(&v4l2_event, 0, sizeof(v4l2_event)); v4l2_event.type = UVC_EVENT_STREAMON; - v4l2_event_queue(uvc->vdev, &v4l2_event); + v4l2_event_queue(&uvc->vdev, &v4l2_event); return USB_GADGET_DELAYED_STATUS; default: @@ -388,7 +388,7 @@ uvc_function_disable(struct usb_function *f) memset(&v4l2_event, 0, sizeof(v4l2_event)); v4l2_event.type = UVC_EVENT_DISCONNECT; - v4l2_event_queue(uvc->vdev, &v4l2_event); + v4l2_event_queue(&uvc->vdev, &v4l2_event); uvc->state = UVC_STATE_DISCONNECTED; @@ -435,24 +435,19 @@ static int uvc_register_video(struct uvc_device *uvc) { struct usb_composite_dev *cdev = uvc->func.config->cdev; - struct video_device *video; /* TODO reference counting. */ - video = video_device_alloc(); - if (video == NULL) - return -ENOMEM; + uvc->vdev.v4l2_dev = &uvc->v4l2_dev; + uvc->vdev.fops = &uvc_v4l2_fops; + uvc->vdev.ioctl_ops = &uvc_v4l2_ioctl_ops; + uvc->vdev.release = video_device_release_empty; + uvc->vdev.vfl_dir = VFL_DIR_TX; + uvc->vdev.lock = &uvc->video.mutex; + strlcpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name)); - video->v4l2_dev = &uvc->v4l2_dev; - video->fops = &uvc_v4l2_fops; - video->ioctl_ops = &uvc_v4l2_ioctl_ops; - video->release = video_device_release; - video->vfl_dir = VFL_DIR_TX; - strlcpy(video->name, cdev->gadget->name, sizeof(video->name)); + video_set_drvdata(&uvc->vdev, uvc); - uvc->vdev = video; - video_set_drvdata(video, uvc); - - return video_register_device(video, VFL_TYPE_GRABBER, -1); + return video_register_device(&uvc->vdev, VFL_TYPE_GRABBER, -1); } #define UVC_COPY_DESCRIPTOR(mem, dst, desc) \ @@ -765,8 +760,6 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) error: v4l2_device_unregister(&uvc->v4l2_dev); - if (uvc->vdev) - video_device_release(uvc->vdev); if (uvc->control_ep) uvc->control_ep->driver_data = NULL; @@ -897,7 +890,7 @@ static void uvc_unbind(struct usb_configuration *c, struct usb_function *f) INFO(cdev, "%s\n", __func__); - video_unregister_device(uvc->vdev); + video_unregister_device(&uvc->vdev); v4l2_device_unregister(&uvc->v4l2_dev); uvc->control_ep->driver_data = NULL; uvc->video.ep->driver_data = NULL; @@ -918,6 +911,7 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi) if (uvc == NULL) return ERR_PTR(-ENOMEM); + mutex_init(&uvc->video.mutex); uvc->state = UVC_STATE_DISCONNECTED; opts = fi_to_f_uvc_opts(fi); diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 95d2324f6977..70d3917cc003 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -25,6 +25,7 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/errno.h> +#include <linux/idr.h> #include <linux/list.h> #include <linux/proc_fs.h> #include <linux/slab.h> @@ -57,17 +58,26 @@ MODULE_PARM_DESC (rndis_debug, "enable debugging"); #define rndis_debug 0 #endif -#define RNDIS_MAX_CONFIGS 1 +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +#define NAME_TEMPLATE "driver/rndis-%03d" -static rndis_params rndis_per_dev_params[RNDIS_MAX_CONFIGS]; +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +static DEFINE_IDA(rndis_ida); /* Driver Version */ static const __le32 rndis_driver_version = cpu_to_le32(1); /* Function Prototypes */ -static rndis_resp_t *rndis_add_response(int configNr, u32 length); +static rndis_resp_t *rndis_add_response(struct rndis_params *params, + u32 length); + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static const struct file_operations rndis_proc_fops; +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ /* supported OIDs */ static const u32 oid_supported_list[] = @@ -160,7 +170,7 @@ static const u32 oid_supported_list[] = /* NDIS Functions */ -static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, +static int gen_ndis_query_resp(struct rndis_params *params, u32 OID, u8 *buf, unsigned buf_len, rndis_resp_t *r) { int retval = -ENOTSUPP; @@ -192,7 +202,7 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, outbuf = (__le32 *)&resp[1]; resp->InformationBufferOffset = cpu_to_le32(16); - net = rndis_per_dev_params[configNr].dev; + net = params->dev; stats = dev_get_stats(net, &temp); switch (OID) { @@ -225,7 +235,7 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* mandatory */ case RNDIS_OID_GEN_MEDIA_SUPPORTED: pr_debug("%s: RNDIS_OID_GEN_MEDIA_SUPPORTED\n", __func__); - *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); + *outbuf = cpu_to_le32(params->medium); retval = 0; break; @@ -233,16 +243,15 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, case RNDIS_OID_GEN_MEDIA_IN_USE: pr_debug("%s: RNDIS_OID_GEN_MEDIA_IN_USE\n", __func__); /* one medium, one transport... (maybe you do it better) */ - *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); + *outbuf = cpu_to_le32(params->medium); retval = 0; break; /* mandatory */ case RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE: pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].dev->mtu); + if (params->dev) { + *outbuf = cpu_to_le32(params->dev->mtu); retval = 0; } break; @@ -251,21 +260,18 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, case RNDIS_OID_GEN_LINK_SPEED: if (rndis_debug > 1) pr_debug("%s: RNDIS_OID_GEN_LINK_SPEED\n", __func__); - if (rndis_per_dev_params[configNr].media_state - == RNDIS_MEDIA_STATE_DISCONNECTED) + if (params->media_state == RNDIS_MEDIA_STATE_DISCONNECTED) *outbuf = cpu_to_le32(0); else - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].speed); + *outbuf = cpu_to_le32(params->speed); retval = 0; break; /* mandatory */ case RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE: pr_debug("%s: RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].dev->mtu); + if (params->dev) { + *outbuf = cpu_to_le32(params->dev->mtu); retval = 0; } break; @@ -273,9 +279,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* mandatory */ case RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE: pr_debug("%s: RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__); - if (rndis_per_dev_params[configNr].dev) { - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].dev->mtu); + if (params->dev) { + *outbuf = cpu_to_le32(params->dev->mtu); retval = 0; } break; @@ -283,20 +288,16 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* mandatory */ case RNDIS_OID_GEN_VENDOR_ID: pr_debug("%s: RNDIS_OID_GEN_VENDOR_ID\n", __func__); - *outbuf = cpu_to_le32( - rndis_per_dev_params[configNr].vendorID); + *outbuf = cpu_to_le32(params->vendorID); retval = 0; break; /* mandatory */ case RNDIS_OID_GEN_VENDOR_DESCRIPTION: pr_debug("%s: RNDIS_OID_GEN_VENDOR_DESCRIPTION\n", __func__); - if (rndis_per_dev_params[configNr].vendorDescr) { - length = strlen(rndis_per_dev_params[configNr]. - vendorDescr); - memcpy(outbuf, - rndis_per_dev_params[configNr].vendorDescr, - length); + if (params->vendorDescr) { + length = strlen(params->vendorDescr); + memcpy(outbuf, params->vendorDescr, length); } else { outbuf[0] = 0; } @@ -313,7 +314,7 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* mandatory */ case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER\n", __func__); - *outbuf = cpu_to_le32(*rndis_per_dev_params[configNr].filter); + *outbuf = cpu_to_le32(*params->filter); retval = 0; break; @@ -328,8 +329,7 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, case RNDIS_OID_GEN_MEDIA_CONNECT_STATUS: if (rndis_debug > 1) pr_debug("%s: RNDIS_OID_GEN_MEDIA_CONNECT_STATUS\n", __func__); - *outbuf = cpu_to_le32(rndis_per_dev_params[configNr] - .media_state); + *outbuf = cpu_to_le32(params->media_state); retval = 0; break; @@ -409,11 +409,9 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* mandatory */ case RNDIS_OID_802_3_PERMANENT_ADDRESS: pr_debug("%s: RNDIS_OID_802_3_PERMANENT_ADDRESS\n", __func__); - if (rndis_per_dev_params[configNr].dev) { + if (params->dev) { length = ETH_ALEN; - memcpy(outbuf, - rndis_per_dev_params[configNr].host_mac, - length); + memcpy(outbuf, params->host_mac, length); retval = 0; } break; @@ -421,11 +419,9 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* mandatory */ case RNDIS_OID_802_3_CURRENT_ADDRESS: pr_debug("%s: RNDIS_OID_802_3_CURRENT_ADDRESS\n", __func__); - if (rndis_per_dev_params[configNr].dev) { + if (params->dev) { length = ETH_ALEN; - memcpy(outbuf, - rndis_per_dev_params [configNr].host_mac, - length); + memcpy(outbuf, params->host_mac, length); retval = 0; } break; @@ -490,12 +486,11 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, return retval; } -static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, - rndis_resp_t *r) +static int gen_ndis_set_resp(struct rndis_params *params, u32 OID, + u8 *buf, u32 buf_len, rndis_resp_t *r) { rndis_set_cmplt_type *resp; int i, retval = -ENOTSUPP; - struct rndis_params *params; if (!r) return -ENOMEM; @@ -514,7 +509,6 @@ static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, } } - params = &rndis_per_dev_params[configNr]; switch (OID) { case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: @@ -563,16 +557,16 @@ static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, * Response Functions */ -static int rndis_init_response(int configNr, rndis_init_msg_type *buf) +static int rndis_init_response(struct rndis_params *params, + rndis_init_msg_type *buf) { rndis_init_cmplt_type *resp; rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; if (!params->dev) return -ENOTSUPP; - r = rndis_add_response(configNr, sizeof(rndis_init_cmplt_type)); + r = rndis_add_response(params, sizeof(rndis_init_cmplt_type)); if (!r) return -ENOMEM; resp = (rndis_init_cmplt_type *)r->buf; @@ -599,11 +593,11 @@ static int rndis_init_response(int configNr, rndis_init_msg_type *buf) return 0; } -static int rndis_query_response(int configNr, rndis_query_msg_type *buf) +static int rndis_query_response(struct rndis_params *params, + rndis_query_msg_type *buf) { rndis_query_cmplt_type *resp; rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; /* pr_debug("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID)); */ if (!params->dev) @@ -615,7 +609,7 @@ static int rndis_query_response(int configNr, rndis_query_msg_type *buf) * rndis_query_cmplt_type followed by data. * oid_supported_list is the largest data reply */ - r = rndis_add_response(configNr, + r = rndis_add_response(params, sizeof(oid_supported_list) + sizeof(rndis_query_cmplt_type)); if (!r) return -ENOMEM; @@ -624,7 +618,7 @@ static int rndis_query_response(int configNr, rndis_query_msg_type *buf) resp->MessageType = cpu_to_le32(RNDIS_MSG_QUERY_C); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - if (gen_ndis_query_resp(configNr, le32_to_cpu(buf->OID), + if (gen_ndis_query_resp(params, le32_to_cpu(buf->OID), le32_to_cpu(buf->InformationBufferOffset) + 8 + (u8 *)buf, le32_to_cpu(buf->InformationBufferLength), @@ -641,14 +635,14 @@ static int rndis_query_response(int configNr, rndis_query_msg_type *buf) return 0; } -static int rndis_set_response(int configNr, rndis_set_msg_type *buf) +static int rndis_set_response(struct rndis_params *params, + rndis_set_msg_type *buf) { u32 BufLength, BufOffset; rndis_set_cmplt_type *resp; rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - r = rndis_add_response(configNr, sizeof(rndis_set_cmplt_type)); + r = rndis_add_response(params, sizeof(rndis_set_cmplt_type)); if (!r) return -ENOMEM; resp = (rndis_set_cmplt_type *)r->buf; @@ -671,7 +665,7 @@ static int rndis_set_response(int configNr, rndis_set_msg_type *buf) resp->MessageType = cpu_to_le32(RNDIS_MSG_SET_C); resp->MessageLength = cpu_to_le32(16); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - if (gen_ndis_set_resp(configNr, le32_to_cpu(buf->OID), + if (gen_ndis_set_resp(params, le32_to_cpu(buf->OID), ((u8 *)buf) + 8 + BufOffset, BufLength, r)) resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); else @@ -681,13 +675,13 @@ static int rndis_set_response(int configNr, rndis_set_msg_type *buf) return 0; } -static int rndis_reset_response(int configNr, rndis_reset_msg_type *buf) +static int rndis_reset_response(struct rndis_params *params, + rndis_reset_msg_type *buf) { rndis_reset_cmplt_type *resp; rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; - r = rndis_add_response(configNr, sizeof(rndis_reset_cmplt_type)); + r = rndis_add_response(params, sizeof(rndis_reset_cmplt_type)); if (!r) return -ENOMEM; resp = (rndis_reset_cmplt_type *)r->buf; @@ -702,16 +696,15 @@ static int rndis_reset_response(int configNr, rndis_reset_msg_type *buf) return 0; } -static int rndis_keepalive_response(int configNr, +static int rndis_keepalive_response(struct rndis_params *params, rndis_keepalive_msg_type *buf) { rndis_keepalive_cmplt_type *resp; rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; /* host "should" check only in RNDIS_DATA_INITIALIZED state */ - r = rndis_add_response(configNr, sizeof(rndis_keepalive_cmplt_type)); + r = rndis_add_response(params, sizeof(rndis_keepalive_cmplt_type)); if (!r) return -ENOMEM; resp = (rndis_keepalive_cmplt_type *)r->buf; @@ -729,17 +722,15 @@ static int rndis_keepalive_response(int configNr, /* * Device to Host Comunication */ -static int rndis_indicate_status_msg(int configNr, u32 status) +static int rndis_indicate_status_msg(struct rndis_params *params, u32 status) { rndis_indicate_status_msg_type *resp; rndis_resp_t *r; - struct rndis_params *params = rndis_per_dev_params + configNr; if (params->state == RNDIS_UNINITIALIZED) return -ENOTSUPP; - r = rndis_add_response(configNr, - sizeof(rndis_indicate_status_msg_type)); + r = rndis_add_response(params, sizeof(rndis_indicate_status_msg_type)); if (!r) return -ENOMEM; resp = (rndis_indicate_status_msg_type *)r->buf; @@ -754,53 +745,48 @@ static int rndis_indicate_status_msg(int configNr, u32 status) return 0; } -int rndis_signal_connect(int configNr) +int rndis_signal_connect(struct rndis_params *params) { - rndis_per_dev_params[configNr].media_state - = RNDIS_MEDIA_STATE_CONNECTED; - return rndis_indicate_status_msg(configNr, - RNDIS_STATUS_MEDIA_CONNECT); + params->media_state = RNDIS_MEDIA_STATE_CONNECTED; + return rndis_indicate_status_msg(params, RNDIS_STATUS_MEDIA_CONNECT); } EXPORT_SYMBOL_GPL(rndis_signal_connect); -int rndis_signal_disconnect(int configNr) +int rndis_signal_disconnect(struct rndis_params *params) { - rndis_per_dev_params[configNr].media_state - = RNDIS_MEDIA_STATE_DISCONNECTED; - return rndis_indicate_status_msg(configNr, - RNDIS_STATUS_MEDIA_DISCONNECT); + params->media_state = RNDIS_MEDIA_STATE_DISCONNECTED; + return rndis_indicate_status_msg(params, RNDIS_STATUS_MEDIA_DISCONNECT); } EXPORT_SYMBOL_GPL(rndis_signal_disconnect); -void rndis_uninit(int configNr) +void rndis_uninit(struct rndis_params *params) { u8 *buf; u32 length; - if (configNr >= RNDIS_MAX_CONFIGS) + if (!params) return; - rndis_per_dev_params[configNr].state = RNDIS_UNINITIALIZED; + params->state = RNDIS_UNINITIALIZED; /* drain the response queue */ - while ((buf = rndis_get_next_response(configNr, &length))) - rndis_free_response(configNr, buf); + while ((buf = rndis_get_next_response(params, &length))) + rndis_free_response(params, buf); } EXPORT_SYMBOL_GPL(rndis_uninit); -void rndis_set_host_mac(int configNr, const u8 *addr) +void rndis_set_host_mac(struct rndis_params *params, const u8 *addr) { - rndis_per_dev_params[configNr].host_mac = addr; + params->host_mac = addr; } EXPORT_SYMBOL_GPL(rndis_set_host_mac); /* * Message Parser */ -int rndis_msg_parser(u8 configNr, u8 *buf) +int rndis_msg_parser(struct rndis_params *params, u8 *buf) { u32 MsgType, MsgLength; __le32 *tmp; - struct rndis_params *params; if (!buf) return -ENOMEM; @@ -809,9 +795,8 @@ int rndis_msg_parser(u8 configNr, u8 *buf) MsgType = get_unaligned_le32(tmp++); MsgLength = get_unaligned_le32(tmp++); - if (configNr >= RNDIS_MAX_CONFIGS) + if (!params) return -ENOTSUPP; - params = &rndis_per_dev_params[configNr]; /* NOTE: RNDIS is *EXTREMELY* chatty ... Windows constantly polls for * rx/tx statistics and link status, in addition to KEEPALIVE traffic @@ -824,8 +809,7 @@ int rndis_msg_parser(u8 configNr, u8 *buf) pr_debug("%s: RNDIS_MSG_INIT\n", __func__); params->state = RNDIS_INITIALIZED; - return rndis_init_response(configNr, - (rndis_init_msg_type *)buf); + return rndis_init_response(params, (rndis_init_msg_type *)buf); case RNDIS_MSG_HALT: pr_debug("%s: RNDIS_MSG_HALT\n", @@ -838,17 +822,16 @@ int rndis_msg_parser(u8 configNr, u8 *buf) return 0; case RNDIS_MSG_QUERY: - return rndis_query_response(configNr, + return rndis_query_response(params, (rndis_query_msg_type *)buf); case RNDIS_MSG_SET: - return rndis_set_response(configNr, - (rndis_set_msg_type *)buf); + return rndis_set_response(params, (rndis_set_msg_type *)buf); case RNDIS_MSG_RESET: pr_debug("%s: RNDIS_MSG_RESET\n", __func__); - return rndis_reset_response(configNr, + return rndis_reset_response(params, (rndis_reset_msg_type *)buf); case RNDIS_MSG_KEEPALIVE: @@ -856,7 +839,7 @@ int rndis_msg_parser(u8 configNr, u8 *buf) if (rndis_debug > 1) pr_debug("%s: RNDIS_MSG_KEEPALIVE\n", __func__); - return rndis_keepalive_response(configNr, + return rndis_keepalive_response(params, (rndis_keepalive_msg_type *) buf); @@ -876,71 +859,131 @@ int rndis_msg_parser(u8 configNr, u8 *buf) } EXPORT_SYMBOL_GPL(rndis_msg_parser); -int rndis_register(void (*resp_avail)(void *v), void *v) +static inline int rndis_get_nr(void) { - u8 i; + return ida_simple_get(&rndis_ida, 0, 0, GFP_KERNEL); +} + +static inline void rndis_put_nr(int nr) +{ + ida_simple_remove(&rndis_ida, nr); +} + +struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v) +{ + struct rndis_params *params; + int i; if (!resp_avail) - return -EINVAL; + return ERR_PTR(-EINVAL); + + i = rndis_get_nr(); + if (i < 0) { + pr_debug("failed\n"); + + return ERR_PTR(-ENODEV); + } + + params = kzalloc(sizeof(*params), GFP_KERNEL); + if (!params) { + rndis_put_nr(i); - for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { - if (!rndis_per_dev_params[i].used) { - rndis_per_dev_params[i].used = 1; - rndis_per_dev_params[i].resp_avail = resp_avail; - rndis_per_dev_params[i].v = v; - pr_debug("%s: configNr = %d\n", __func__, i); - return i; + return ERR_PTR(-ENOMEM); + } + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + { + struct proc_dir_entry *proc_entry; + char name[20]; + + sprintf(name, NAME_TEMPLATE, i); + proc_entry = proc_create_data(name, 0660, NULL, + &rndis_proc_fops, params); + if (!proc_entry) { + kfree(params); + rndis_put_nr(i); + + return ERR_PTR(-EIO); } } - pr_debug("failed\n"); +#endif + + params->confignr = i; + params->used = 1; + params->state = RNDIS_UNINITIALIZED; + params->media_state = RNDIS_MEDIA_STATE_DISCONNECTED; + params->resp_avail = resp_avail; + params->v = v; + INIT_LIST_HEAD(&(params->resp_queue)); + pr_debug("%s: configNr = %d\n", __func__, i); - return -ENODEV; + return params; } EXPORT_SYMBOL_GPL(rndis_register); -void rndis_deregister(int configNr) +void rndis_deregister(struct rndis_params *params) { + int i; + pr_debug("%s:\n", __func__); - if (configNr >= RNDIS_MAX_CONFIGS) return; - rndis_per_dev_params[configNr].used = 0; + if (!params) + return; + + i = params->confignr; + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + { + char name[20]; + + sprintf(name, NAME_TEMPLATE, i); + remove_proc_entry(name, NULL); + } +#endif + + kfree(params); + rndis_put_nr(i); } EXPORT_SYMBOL_GPL(rndis_deregister); - -int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) +int rndis_set_param_dev(struct rndis_params *params, struct net_device *dev, + u16 *cdc_filter) { pr_debug("%s:\n", __func__); if (!dev) return -EINVAL; - if (configNr >= RNDIS_MAX_CONFIGS) return -1; + if (!params) + return -1; - rndis_per_dev_params[configNr].dev = dev; - rndis_per_dev_params[configNr].filter = cdc_filter; + params->dev = dev; + params->filter = cdc_filter; return 0; } EXPORT_SYMBOL_GPL(rndis_set_param_dev); -int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr) +int rndis_set_param_vendor(struct rndis_params *params, u32 vendorID, + const char *vendorDescr) { pr_debug("%s:\n", __func__); if (!vendorDescr) return -1; - if (configNr >= RNDIS_MAX_CONFIGS) return -1; + if (!params) + return -1; - rndis_per_dev_params[configNr].vendorID = vendorID; - rndis_per_dev_params[configNr].vendorDescr = vendorDescr; + params->vendorID = vendorID; + params->vendorDescr = vendorDescr; return 0; } EXPORT_SYMBOL_GPL(rndis_set_param_vendor); -int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed) +int rndis_set_param_medium(struct rndis_params *params, u32 medium, u32 speed) { pr_debug("%s: %u %u\n", __func__, medium, speed); - if (configNr >= RNDIS_MAX_CONFIGS) return -1; + if (!params) + return -1; - rndis_per_dev_params[configNr].medium = medium; - rndis_per_dev_params[configNr].speed = speed; + params->medium = medium; + params->speed = speed; return 0; } @@ -961,13 +1004,12 @@ void rndis_add_hdr(struct sk_buff *skb) } EXPORT_SYMBOL_GPL(rndis_add_hdr); -void rndis_free_response(int configNr, u8 *buf) +void rndis_free_response(struct rndis_params *params, u8 *buf) { rndis_resp_t *r; struct list_head *act, *tmp; - list_for_each_safe(act, tmp, - &(rndis_per_dev_params[configNr].resp_queue)) + list_for_each_safe(act, tmp, &(params->resp_queue)) { r = list_entry(act, rndis_resp_t, list); if (r && r->buf == buf) { @@ -978,15 +1020,14 @@ void rndis_free_response(int configNr, u8 *buf) } EXPORT_SYMBOL_GPL(rndis_free_response); -u8 *rndis_get_next_response(int configNr, u32 *length) +u8 *rndis_get_next_response(struct rndis_params *params, u32 *length) { rndis_resp_t *r; struct list_head *act, *tmp; if (!length) return NULL; - list_for_each_safe(act, tmp, - &(rndis_per_dev_params[configNr].resp_queue)) + list_for_each_safe(act, tmp, &(params->resp_queue)) { r = list_entry(act, rndis_resp_t, list); if (!r->send) { @@ -1000,7 +1041,7 @@ u8 *rndis_get_next_response(int configNr, u32 *length) } EXPORT_SYMBOL_GPL(rndis_get_next_response); -static rndis_resp_t *rndis_add_response(int configNr, u32 length) +static rndis_resp_t *rndis_add_response(struct rndis_params *params, u32 length) { rndis_resp_t *r; @@ -1012,8 +1053,7 @@ static rndis_resp_t *rndis_add_response(int configNr, u32 length) r->length = length; r->send = 0; - list_add_tail(&r->list, - &(rndis_per_dev_params[configNr].resp_queue)); + list_add_tail(&r->list, &(params->resp_queue)); return r; } @@ -1103,11 +1143,11 @@ static ssize_t rndis_proc_write(struct file *file, const char __user *buffer, break; case 'C': case 'c': - rndis_signal_connect(p->confignr); + rndis_signal_connect(p); break; case 'D': case 'd': - rndis_signal_disconnect(p->confignr); + rndis_signal_disconnect(p); break; default: if (fl_speed) p->speed = speed; @@ -1137,54 +1177,4 @@ static const struct file_operations rndis_proc_fops = { #define NAME_TEMPLATE "driver/rndis-%03d" -static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS]; - #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ - - -int rndis_init(void) -{ - u8 i; - - for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - char name [20]; - - sprintf(name, NAME_TEMPLATE, i); - rndis_connect_state[i] = proc_create_data(name, 0660, NULL, - &rndis_proc_fops, - (void *)(rndis_per_dev_params + i)); - if (!rndis_connect_state[i]) { - pr_debug("%s: remove entries", __func__); - while (i) { - sprintf(name, NAME_TEMPLATE, --i); - remove_proc_entry(name, NULL); - } - pr_debug("\n"); - return -EIO; - } -#endif - rndis_per_dev_params[i].confignr = i; - rndis_per_dev_params[i].used = 0; - rndis_per_dev_params[i].state = RNDIS_UNINITIALIZED; - rndis_per_dev_params[i].media_state - = RNDIS_MEDIA_STATE_DISCONNECTED; - INIT_LIST_HEAD(&(rndis_per_dev_params[i].resp_queue)); - } - - return 0; -} - -void rndis_exit(void) -{ -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - u8 i; - char name[20]; - - for (i = 0; i < RNDIS_MAX_CONFIGS; i++) { - sprintf(name, NAME_TEMPLATE, i); - remove_proc_entry(name, NULL); - } -#endif -} - diff --git a/drivers/usb/gadget/function/rndis.h b/drivers/usb/gadget/function/rndis.h index 0f4abb4c3775..ef92eb66d8ad 100644 --- a/drivers/usb/gadget/function/rndis.h +++ b/drivers/usb/gadget/function/rndis.h @@ -177,7 +177,7 @@ typedef struct rndis_resp_t typedef struct rndis_params { - u8 confignr; + int confignr; u8 used; u16 saved_filter; enum rndis_state state; @@ -197,24 +197,25 @@ typedef struct rndis_params } rndis_params; /* RNDIS Message parser and other useless functions */ -int rndis_msg_parser (u8 configNr, u8 *buf); -int rndis_register(void (*resp_avail)(void *v), void *v); -void rndis_deregister (int configNr); -int rndis_set_param_dev (u8 configNr, struct net_device *dev, +int rndis_msg_parser(struct rndis_params *params, u8 *buf); +struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v); +void rndis_deregister(struct rndis_params *params); +int rndis_set_param_dev(struct rndis_params *params, struct net_device *dev, u16 *cdc_filter); -int rndis_set_param_vendor (u8 configNr, u32 vendorID, +int rndis_set_param_vendor(struct rndis_params *params, u32 vendorID, const char *vendorDescr); -int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed); -void rndis_add_hdr (struct sk_buff *skb); +int rndis_set_param_medium(struct rndis_params *params, u32 medium, + u32 speed); +void rndis_add_hdr(struct sk_buff *skb); int rndis_rm_hdr(struct gether *port, struct sk_buff *skb, struct sk_buff_head *list); -u8 *rndis_get_next_response (int configNr, u32 *length); -void rndis_free_response (int configNr, u8 *buf); - -void rndis_uninit (int configNr); -int rndis_signal_connect (int configNr); -int rndis_signal_disconnect (int configNr); -int rndis_state (int configNr); -extern void rndis_set_host_mac (int configNr, const u8 *addr); +u8 *rndis_get_next_response(struct rndis_params *params, u32 *length); +void rndis_free_response(struct rndis_params *params, u8 *buf); + +void rndis_uninit(struct rndis_params *params); +int rndis_signal_connect(struct rndis_params *params); +int rndis_signal_disconnect(struct rndis_params *params); +int rndis_state(struct rndis_params *params); +extern void rndis_set_host_mac(struct rndis_params *params, const u8 *addr); #endif /* _LINUX_RNDIS_H */ diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index 648f9e489b39..d62683017cf3 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -341,7 +341,7 @@ ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, down_read(filesem); if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */ - p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1); + p = file_path(curlun->filp, buf, PAGE_SIZE - 1); if (IS_ERR(p)) rc = PTR_ERR(p); else { diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h new file mode 100644 index 000000000000..0e2c49d4274e --- /dev/null +++ b/drivers/usb/gadget/function/u_printer.h @@ -0,0 +1,37 @@ +/* + * u_printer.h + * + * Utility definitions for the printer function + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef U_PRINTER_H +#define U_PRINTER_H + +#include <linux/usb/composite.h> + +#define PNP_STRING_LEN 1024 + +struct f_printer_opts { + struct usb_function_instance func_inst; + int minor; + char pnp_string[PNP_STRING_LEN]; + unsigned q_len; + + /* + * Protect the data from concurrent access by read/write + * and create symlink/remove symlink + */ + struct mutex lock; + int refcnt; +}; + +#endif /* U_PRINTER_H */ diff --git a/drivers/usb/gadget/function/u_rndis.h b/drivers/usb/gadget/function/u_rndis.h index e902aa42a297..4eafd5050545 100644 --- a/drivers/usb/gadget/function/u_rndis.h +++ b/drivers/usb/gadget/function/u_rndis.h @@ -39,8 +39,6 @@ struct f_rndis_opts { int refcnt; }; -int rndis_init(void); -void rndis_exit(void); void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net); #endif /* U_RNDIS_H */ diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 491082aaf103..7ee057930ae7 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -113,6 +113,7 @@ struct gs_port { int write_allocated; struct gs_buf port_write_buf; wait_queue_head_t drain_wait; /* wait while writes drain */ + bool write_busy; /* REVISIT this state ... */ struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ @@ -363,7 +364,7 @@ __acquires(&port->port_lock) int status = 0; bool do_tty_wake = false; - while (!list_empty(pool)) { + while (!port->write_busy && !list_empty(pool)) { struct usb_request *req; int len; @@ -393,9 +394,11 @@ __acquires(&port->port_lock) * NOTE that we may keep sending data for a while after * the TTY closed (dev->ioport->port_tty is NULL). */ + port->write_busy = true; spin_unlock(&port->port_lock); status = usb_ep_queue(in, req, GFP_ATOMIC); spin_lock(&port->port_lock); + port->write_busy = false; if (status) { pr_debug("%s: %s %s err %d\n", @@ -912,7 +915,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch) unsigned long flags; int status; - pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n", + pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n", port->port_num, tty, ch, __builtin_return_address(0)); spin_lock_irqsave(&port->port_lock, flags); diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h index f67695cb28f8..7d3bb6272e06 100644 --- a/drivers/usb/gadget/function/uvc.h +++ b/drivers/usb/gadget/function/uvc.h @@ -56,7 +56,6 @@ struct uvc_event #include <linux/usb/composite.h> #include <linux/usb/gadget.h> #include <linux/videodev2.h> -#include <linux/version.h> #include <media/v4l2-fh.h> #include <media/v4l2-device.h> @@ -115,6 +114,7 @@ struct uvc_video unsigned int width; unsigned int height; unsigned int imagesize; + struct mutex mutex; /* protects frame parameters */ /* Requests */ unsigned int req_size; @@ -143,7 +143,7 @@ enum uvc_state struct uvc_device { - struct video_device *vdev; + struct video_device vdev; struct v4l2_device v4l2_dev; enum uvc_state state; struct usb_function func; diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c index 8ea8b3b227b4..d617c39a0052 100644 --- a/drivers/usb/gadget/function/uvc_queue.c +++ b/drivers/usb/gadget/function/uvc_queue.c @@ -104,29 +104,16 @@ static void uvc_buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&queue->irqlock, flags); } -static void uvc_wait_prepare(struct vb2_queue *vq) -{ - struct uvc_video_queue *queue = vb2_get_drv_priv(vq); - - mutex_unlock(&queue->mutex); -} - -static void uvc_wait_finish(struct vb2_queue *vq) -{ - struct uvc_video_queue *queue = vb2_get_drv_priv(vq); - - mutex_lock(&queue->mutex); -} - static struct vb2_ops uvc_queue_qops = { .queue_setup = uvc_queue_setup, .buf_prepare = uvc_buffer_prepare, .buf_queue = uvc_buffer_queue, - .wait_prepare = uvc_wait_prepare, - .wait_finish = uvc_wait_finish, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, }; -int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) +int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type, + struct mutex *lock) { int ret; @@ -135,6 +122,7 @@ int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) queue->queue.drv_priv = queue; queue->queue.buf_struct_size = sizeof(struct uvc_buffer); queue->queue.ops = &uvc_queue_qops; + queue->queue.lock = lock; queue->queue.mem_ops = &vb2_vmalloc_memops; queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC | V4L2_BUF_FLAG_TSTAMP_SRC_EOF; @@ -142,7 +130,6 @@ int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) if (ret) return ret; - mutex_init(&queue->mutex); spin_lock_init(&queue->irqlock); INIT_LIST_HEAD(&queue->irqqueue); queue->flags = 0; @@ -155,9 +142,7 @@ int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) */ void uvcg_free_buffers(struct uvc_video_queue *queue) { - mutex_lock(&queue->mutex); vb2_queue_release(&queue->queue); - mutex_unlock(&queue->mutex); } /* @@ -168,22 +153,14 @@ int uvcg_alloc_buffers(struct uvc_video_queue *queue, { int ret; - mutex_lock(&queue->mutex); ret = vb2_reqbufs(&queue->queue, rb); - mutex_unlock(&queue->mutex); return ret ? ret : rb->count; } int uvcg_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf) { - int ret; - - mutex_lock(&queue->mutex); - ret = vb2_querybuf(&queue->queue, buf); - mutex_unlock(&queue->mutex); - - return ret; + return vb2_querybuf(&queue->queue, buf); } int uvcg_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf) @@ -191,18 +168,14 @@ int uvcg_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf) unsigned long flags; int ret; - mutex_lock(&queue->mutex); ret = vb2_qbuf(&queue->queue, buf); if (ret < 0) - goto done; + return ret; spin_lock_irqsave(&queue->irqlock, flags); ret = (queue->flags & UVC_QUEUE_PAUSED) != 0; queue->flags &= ~UVC_QUEUE_PAUSED; spin_unlock_irqrestore(&queue->irqlock, flags); - -done: - mutex_unlock(&queue->mutex); return ret; } @@ -213,13 +186,7 @@ done: int uvcg_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf, int nonblocking) { - int ret; - - mutex_lock(&queue->mutex); - ret = vb2_dqbuf(&queue->queue, buf, nonblocking); - mutex_unlock(&queue->mutex); - - return ret; + return vb2_dqbuf(&queue->queue, buf, nonblocking); } /* @@ -231,24 +198,12 @@ int uvcg_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf, unsigned int uvcg_queue_poll(struct uvc_video_queue *queue, struct file *file, poll_table *wait) { - unsigned int ret; - - mutex_lock(&queue->mutex); - ret = vb2_poll(&queue->queue, file, wait); - mutex_unlock(&queue->mutex); - - return ret; + return vb2_poll(&queue->queue, file, wait); } int uvcg_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma) { - int ret; - - mutex_lock(&queue->mutex); - ret = vb2_mmap(&queue->queue, vma); - mutex_unlock(&queue->mutex); - - return ret; + return vb2_mmap(&queue->queue, vma); } #ifndef CONFIG_MMU @@ -260,12 +215,7 @@ int uvcg_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma) unsigned long uvcg_queue_get_unmapped_area(struct uvc_video_queue *queue, unsigned long pgoff) { - unsigned long ret; - - mutex_lock(&queue->mutex); - ret = vb2_get_unmapped_area(&queue->queue, 0, 0, pgoff, 0); - mutex_unlock(&queue->mutex); - return ret; + return vb2_get_unmapped_area(&queue->queue, 0, 0, pgoff, 0); } #endif @@ -327,18 +277,17 @@ int uvcg_queue_enable(struct uvc_video_queue *queue, int enable) unsigned long flags; int ret = 0; - mutex_lock(&queue->mutex); if (enable) { ret = vb2_streamon(&queue->queue, queue->queue.type); if (ret < 0) - goto done; + return ret; queue->sequence = 0; queue->buf_used = 0; } else { ret = vb2_streamoff(&queue->queue, queue->queue.type); if (ret < 0) - goto done; + return ret; spin_lock_irqsave(&queue->irqlock, flags); INIT_LIST_HEAD(&queue->irqqueue); @@ -353,8 +302,6 @@ int uvcg_queue_enable(struct uvc_video_queue *queue, int enable) spin_unlock_irqrestore(&queue->irqlock, flags); } -done: - mutex_unlock(&queue->mutex); return ret; } diff --git a/drivers/usb/gadget/function/uvc_queue.h b/drivers/usb/gadget/function/uvc_queue.h index 03919c724961..01ca9eab3481 100644 --- a/drivers/usb/gadget/function/uvc_queue.h +++ b/drivers/usb/gadget/function/uvc_queue.h @@ -41,7 +41,6 @@ struct uvc_buffer { struct uvc_video_queue { struct vb2_queue queue; - struct mutex mutex; /* Protects queue */ unsigned int flags; __u32 sequence; @@ -57,7 +56,8 @@ static inline int uvc_queue_streaming(struct uvc_video_queue *queue) return vb2_is_streaming(&queue->queue); } -int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type); +int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type, + struct mutex *lock); void uvcg_free_buffers(struct uvc_video_queue *queue); diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c index 8b818fd027b3..f4ccbd56f4d2 100644 --- a/drivers/usb/gadget/function/uvc_v4l2.c +++ b/drivers/usb/gadget/function/uvc_v4l2.c @@ -14,7 +14,6 @@ #include <linux/device.h> #include <linux/errno.h> #include <linux/list.h> -#include <linux/mutex.h> #include <linux/videodev2.h> #include <linux/vmalloc.h> #include <linux/wait.h> @@ -77,7 +76,8 @@ uvc_v4l2_querycap(struct file *file, void *fh, struct v4l2_capability *cap) strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev), sizeof(cap->bus_info)); - cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } @@ -312,8 +312,10 @@ uvc_v4l2_release(struct file *file) uvc_function_disconnect(uvc); + mutex_lock(&video->mutex); uvcg_video_enable(video, 0); uvcg_free_buffers(&video->queue); + mutex_unlock(&video->mutex); file->private_data = NULL; v4l2_fh_del(&handle->vfh); @@ -357,7 +359,7 @@ struct v4l2_file_operations uvc_v4l2_fops = { .owner = THIS_MODULE, .open = uvc_v4l2_open, .release = uvc_v4l2_release, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, .mmap = uvc_v4l2_mmap, .poll = uvc_v4l2_poll, #ifndef CONFIG_MMU diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index 50a5e637ca35..3d0d5d94a62f 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -391,7 +391,8 @@ int uvcg_video_init(struct uvc_video *video) video->imagesize = 320 * 240 * 2; /* Initialize the video buffers queue. */ - uvcg_queue_init(&video->queue, V4L2_BUF_TYPE_VIDEO_OUTPUT); + uvcg_queue_init(&video->queue, V4L2_BUF_TYPE_VIDEO_OUTPUT, + &video->mutex); return 0; } diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 113c87e22117..d5a7102de696 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -301,6 +301,7 @@ config USB_MIDI_GADGET config USB_G_PRINTER tristate "Printer Gadget" select USB_LIBCOMPOSITE + select USB_F_PRINTER help The Printer Gadget channels data between the USB host and a userspace program driving the print engine. The user space diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c index c30b7b572465..1194b09ae746 100644 --- a/drivers/usb/gadget/legacy/acm_ms.c +++ b/drivers/usb/gadget/legacy/acm_ms.c @@ -121,7 +121,7 @@ static struct usb_function *f_msg; /* * We _always_ have both ACM and mass storage functions. */ -static int __init acm_ms_do_config(struct usb_configuration *c) +static int acm_ms_do_config(struct usb_configuration *c) { struct fsg_opts *opts; int status; @@ -174,7 +174,7 @@ static struct usb_configuration acm_ms_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init acm_ms_bind(struct usb_composite_dev *cdev) +static int acm_ms_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct fsg_opts *opts; @@ -249,7 +249,7 @@ fail_get_msg: return status; } -static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) +static int acm_ms_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_msg); usb_put_function_instance(fi_msg); @@ -258,13 +258,13 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver acm_ms_driver = { +static struct usb_composite_driver acm_ms_driver = { .name = "g_acm_ms", .dev = &device_desc, .max_speed = USB_SPEED_SUPER, .strings = dev_strings, .bind = acm_ms_bind, - .unbind = __exit_p(acm_ms_unbind), + .unbind = acm_ms_unbind, }; module_usb_composite_driver(acm_ms_driver); diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c index f46a3956e43d..f289caf18a45 100644 --- a/drivers/usb/gadget/legacy/audio.c +++ b/drivers/usb/gadget/legacy/audio.c @@ -167,7 +167,7 @@ static const struct usb_descriptor_header *otg_desc[] = { /*-------------------------------------------------------------------------*/ -static int __init audio_do_config(struct usb_configuration *c) +static int audio_do_config(struct usb_configuration *c) { int status; @@ -216,7 +216,7 @@ static struct usb_configuration audio_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init audio_bind(struct usb_composite_dev *cdev) +static int audio_bind(struct usb_composite_dev *cdev) { #ifndef CONFIG_GADGET_UAC1 struct f_uac2_opts *uac2_opts; @@ -276,7 +276,7 @@ fail: return status; } -static int __exit audio_unbind(struct usb_composite_dev *cdev) +static int audio_unbind(struct usb_composite_dev *cdev) { #ifdef CONFIG_GADGET_UAC1 if (!IS_ERR_OR_NULL(f_uac1)) @@ -292,13 +292,13 @@ static int __exit audio_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver audio_driver = { +static struct usb_composite_driver audio_driver = { .name = "g_audio", .dev = &device_desc, .strings = audio_strings, .max_speed = USB_SPEED_HIGH, .bind = audio_bind, - .unbind = __exit_p(audio_unbind), + .unbind = audio_unbind, }; module_usb_composite_driver(audio_driver); diff --git a/drivers/usb/gadget/legacy/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c index 2e85d9473478..afd3e37921a7 100644 --- a/drivers/usb/gadget/legacy/cdc2.c +++ b/drivers/usb/gadget/legacy/cdc2.c @@ -104,7 +104,7 @@ static struct usb_function_instance *fi_ecm; /* * We _always_ have both CDC ECM and CDC ACM functions. */ -static int __init cdc_do_config(struct usb_configuration *c) +static int cdc_do_config(struct usb_configuration *c) { int status; @@ -153,7 +153,7 @@ static struct usb_configuration cdc_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init cdc_bind(struct usb_composite_dev *cdev) +static int cdc_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct f_ecm_opts *ecm_opts; @@ -211,7 +211,7 @@ fail: return status; } -static int __exit cdc_unbind(struct usb_composite_dev *cdev) +static int cdc_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_acm); usb_put_function_instance(fi_serial); @@ -222,13 +222,13 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver cdc_driver = { +static struct usb_composite_driver cdc_driver = { .name = "g_cdc", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = cdc_bind, - .unbind = __exit_p(cdc_unbind), + .unbind = cdc_unbind, }; module_usb_composite_driver(cdc_driver); diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c index 633683a72a11..204b10b1a7e7 100644 --- a/drivers/usb/gadget/legacy/dbgp.c +++ b/drivers/usb/gadget/legacy/dbgp.c @@ -284,7 +284,7 @@ fail_1: return -ENODEV; } -static int __init dbgp_bind(struct usb_gadget *gadget, +static int dbgp_bind(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { int err, stp; @@ -406,7 +406,7 @@ fail: return err; } -static __refdata struct usb_gadget_driver dbgp_driver = { +static struct usb_gadget_driver dbgp_driver = { .function = "dbgp", .max_speed = USB_SPEED_HIGH, .bind = dbgp_bind, diff --git a/drivers/usb/gadget/legacy/ether.c b/drivers/usb/gadget/legacy/ether.c index c5fdc61cdc4a..a3323dca218f 100644 --- a/drivers/usb/gadget/legacy/ether.c +++ b/drivers/usb/gadget/legacy/ether.c @@ -222,7 +222,7 @@ static struct usb_function *f_rndis; * the first one present. That's to make Microsoft's drivers happy, * and to follow DOCSIS 1.0 (cable modem standard). */ -static int __init rndis_do_config(struct usb_configuration *c) +static int rndis_do_config(struct usb_configuration *c) { int status; @@ -264,7 +264,7 @@ MODULE_PARM_DESC(use_eem, "use CDC EEM mode"); /* * We _always_ have an ECM, CDC Subset, or EEM configuration. */ -static int __init eth_do_config(struct usb_configuration *c) +static int eth_do_config(struct usb_configuration *c) { int status = 0; @@ -318,7 +318,7 @@ static struct usb_configuration eth_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init eth_bind(struct usb_composite_dev *cdev) +static int eth_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct f_eem_opts *eem_opts = NULL; @@ -447,7 +447,7 @@ fail: return status; } -static int __exit eth_unbind(struct usb_composite_dev *cdev) +static int eth_unbind(struct usb_composite_dev *cdev) { if (has_rndis()) { usb_put_function(f_rndis); @@ -466,13 +466,13 @@ static int __exit eth_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver eth_driver = { +static struct usb_composite_driver eth_driver = { .name = "g_ether", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, .bind = eth_bind, - .unbind = __exit_p(eth_unbind), + .unbind = eth_unbind, }; module_usb_composite_driver(eth_driver); diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c index b01b88e1b716..e821931c965c 100644 --- a/drivers/usb/gadget/legacy/g_ffs.c +++ b/drivers/usb/gadget/legacy/g_ffs.c @@ -163,7 +163,7 @@ static int gfs_unbind(struct usb_composite_dev *cdev); static int gfs_do_config(struct usb_configuration *c); -static __refdata struct usb_composite_driver gfs_driver = { +static struct usb_composite_driver gfs_driver = { .name = DRIVER_NAME, .dev = &gfs_dev_desc, .strings = gfs_dev_strings, @@ -304,8 +304,10 @@ static int functionfs_ready_callback(struct ffs_data *ffs) gfs_registered = true; ret = usb_composite_probe(&gfs_driver); - if (unlikely(ret < 0)) + if (unlikely(ret < 0)) { + ++missing_funcs; gfs_registered = false; + } return ret; } diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c index e02a095294ac..da19c486b61e 100644 --- a/drivers/usb/gadget/legacy/gmidi.c +++ b/drivers/usb/gadget/legacy/gmidi.c @@ -118,7 +118,7 @@ static struct usb_gadget_strings *dev_strings[] = { static struct usb_function_instance *fi_midi; static struct usb_function *f_midi; -static int __exit midi_unbind(struct usb_composite_dev *dev) +static int midi_unbind(struct usb_composite_dev *dev) { usb_put_function(f_midi); usb_put_function_instance(fi_midi); @@ -133,7 +133,7 @@ static struct usb_configuration midi_config = { .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW, }; -static int __init midi_bind_config(struct usb_configuration *c) +static int midi_bind_config(struct usb_configuration *c) { int status; @@ -150,7 +150,7 @@ static int __init midi_bind_config(struct usb_configuration *c) return 0; } -static int __init midi_bind(struct usb_composite_dev *cdev) +static int midi_bind(struct usb_composite_dev *cdev) { struct f_midi_opts *midi_opts; int status; @@ -185,13 +185,13 @@ put: return status; } -static __refdata struct usb_composite_driver midi_driver = { +static struct usb_composite_driver midi_driver = { .name = (char *) longname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = midi_bind, - .unbind = __exit_p(midi_unbind), + .unbind = midi_unbind, }; module_usb_composite_driver(midi_driver); diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c index 614b06d80b41..2baa572686c6 100644 --- a/drivers/usb/gadget/legacy/hid.c +++ b/drivers/usb/gadget/legacy/hid.c @@ -106,7 +106,7 @@ static struct usb_gadget_strings *dev_strings[] = { /****************************** Configurations ******************************/ -static int __init do_config(struct usb_configuration *c) +static int do_config(struct usb_configuration *c) { struct hidg_func_node *e, *n; int status = 0; @@ -147,7 +147,7 @@ static struct usb_configuration config_driver = { /****************************** Gadget Bind ******************************/ -static int __init hid_bind(struct usb_composite_dev *cdev) +static int hid_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct list_head *tmp; @@ -205,7 +205,7 @@ put: return status; } -static int __exit hid_unbind(struct usb_composite_dev *cdev) +static int hid_unbind(struct usb_composite_dev *cdev) { struct hidg_func_node *n; @@ -216,7 +216,7 @@ static int __exit hid_unbind(struct usb_composite_dev *cdev) return 0; } -static int __init hidg_plat_driver_probe(struct platform_device *pdev) +static int hidg_plat_driver_probe(struct platform_device *pdev) { struct hidg_func_descriptor *func = dev_get_platdata(&pdev->dev); struct hidg_func_node *entry; @@ -252,13 +252,13 @@ static int hidg_plat_driver_remove(struct platform_device *pdev) /****************************** Some noise ******************************/ -static __refdata struct usb_composite_driver hidg_driver = { +static struct usb_composite_driver hidg_driver = { .name = "g_hid", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = hid_bind, - .unbind = __exit_p(hid_unbind), + .unbind = hid_unbind, }; static struct platform_driver hidg_plat_driver = { diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 200f9a584064..f454c7af489c 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -26,6 +26,7 @@ #include <linux/poll.h> #include <linux/mmu_context.h> #include <linux/aio.h> +#include <linux/uio.h> #include <linux/device.h> #include <linux/moduleparam.h> @@ -469,7 +470,7 @@ static void ep_user_copy_worker(struct work_struct *work) ret = -EFAULT; /* completing the iocb can drop the ctx and mm, don't touch mm after */ - aio_complete(iocb, ret, ret); + iocb->ki_complete(iocb, ret, ret); kfree(priv->buf); kfree(priv->to_free); @@ -497,7 +498,8 @@ static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req) kfree(priv); iocb->private = NULL; /* aio_complete() reports bytes-transferred _and_ faults */ - aio_complete(iocb, req->actual ? req->actual : req->status, + + iocb->ki_complete(iocb, req->actual ? req->actual : req->status, req->status); } else { /* ep_copy_to_user() won't report both; we hide some faults */ @@ -697,8 +699,6 @@ static const struct file_operations ep_io_operations = { .open = ep_open, .release = ep_release, .llseek = no_llseek, - .read = new_sync_read, - .write = new_sync_write, .unlocked_ioctl = ep_ioctl, .read_iter = ep_read_iter, .write_iter = ep_write_iter, @@ -769,9 +769,12 @@ ep_config (struct ep_data *data, const char *buf, size_t len) if (data->dev->state == STATE_DEV_UNBOUND) { value = -ENOENT; goto gone; - } else if ((ep = data->ep) == NULL) { - value = -ENODEV; - goto gone; + } else { + ep = data->ep; + if (ep == NULL) { + value = -ENODEV; + goto gone; + } } switch (data->dev->gadget->speed) { case USB_SPEED_LOW: @@ -1505,7 +1508,7 @@ static void destroy_ep_files (struct dev_data *dev) list_del_init (&ep->epfiles); dentry = ep->dentry; ep->dentry = NULL; - parent = dentry->d_parent->d_inode; + parent = d_inode(dentry->d_parent); /* break link to controller */ if (ep->state == STATE_EP_ENABLED) diff --git a/drivers/usb/gadget/legacy/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c index 8e27a8c96444..e7bfb081f111 100644 --- a/drivers/usb/gadget/legacy/mass_storage.c +++ b/drivers/usb/gadget/legacy/mass_storage.c @@ -130,7 +130,7 @@ static int msg_thread_exits(struct fsg_common *common) return 0; } -static int __init msg_do_config(struct usb_configuration *c) +static int msg_do_config(struct usb_configuration *c) { struct fsg_opts *opts; int ret; @@ -170,7 +170,7 @@ static struct usb_configuration msg_config_driver = { /****************************** Gadget Bind ******************************/ -static int __init msg_bind(struct usb_composite_dev *cdev) +static int msg_bind(struct usb_composite_dev *cdev) { static const struct fsg_operations ops = { .thread_exits = msg_thread_exits, @@ -248,7 +248,7 @@ static int msg_unbind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static __refdata struct usb_composite_driver msg_driver = { +static struct usb_composite_driver msg_driver = { .name = "g_mass_storage", .dev = &msg_device_desc, .max_speed = USB_SPEED_SUPER, diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c index 39d27bb343b4..b21b51f0c9fa 100644 --- a/drivers/usb/gadget/legacy/multi.c +++ b/drivers/usb/gadget/legacy/multi.c @@ -149,7 +149,7 @@ static struct usb_function *f_acm_rndis; static struct usb_function *f_rndis; static struct usb_function *f_msg_rndis; -static __init int rndis_do_config(struct usb_configuration *c) +static int rndis_do_config(struct usb_configuration *c) { struct fsg_opts *fsg_opts; int ret; @@ -237,7 +237,7 @@ static struct usb_function *f_acm_multi; static struct usb_function *f_ecm; static struct usb_function *f_msg_multi; -static __init int cdc_do_config(struct usb_configuration *c) +static int cdc_do_config(struct usb_configuration *c) { struct fsg_opts *fsg_opts; int ret; @@ -466,7 +466,7 @@ fail: return status; } -static int __exit multi_unbind(struct usb_composite_dev *cdev) +static int multi_unbind(struct usb_composite_dev *cdev) { #ifdef CONFIG_USB_G_MULTI_CDC usb_put_function(f_msg_multi); @@ -497,13 +497,13 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev) /****************************** Some noise ******************************/ -static __refdata struct usb_composite_driver multi_driver = { +static struct usb_composite_driver multi_driver = { .name = "g_multi", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = multi_bind, - .unbind = __exit_p(multi_unbind), + .unbind = multi_unbind, .needs_serial = 1, }; diff --git a/drivers/usb/gadget/legacy/ncm.c b/drivers/usb/gadget/legacy/ncm.c index e90e23db2acb..6ce7421412e9 100644 --- a/drivers/usb/gadget/legacy/ncm.c +++ b/drivers/usb/gadget/legacy/ncm.c @@ -107,7 +107,7 @@ static struct usb_function *f_ncm; /*-------------------------------------------------------------------------*/ -static int __init ncm_do_config(struct usb_configuration *c) +static int ncm_do_config(struct usb_configuration *c) { int status; @@ -143,7 +143,7 @@ static struct usb_configuration ncm_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init gncm_bind(struct usb_composite_dev *cdev) +static int gncm_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct f_ncm_opts *ncm_opts; @@ -186,7 +186,7 @@ fail: return status; } -static int __exit gncm_unbind(struct usb_composite_dev *cdev) +static int gncm_unbind(struct usb_composite_dev *cdev) { if (!IS_ERR_OR_NULL(f_ncm)) usb_put_function(f_ncm); @@ -195,13 +195,13 @@ static int __exit gncm_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver ncm_driver = { +static struct usb_composite_driver ncm_driver = { .name = "g_ncm", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = gncm_bind, - .unbind = __exit_p(gncm_unbind), + .unbind = gncm_unbind, }; module_usb_composite_driver(ncm_driver); diff --git a/drivers/usb/gadget/legacy/nokia.c b/drivers/usb/gadget/legacy/nokia.c index 9b8fd701648c..4bb498a38a1c 100644 --- a/drivers/usb/gadget/legacy/nokia.c +++ b/drivers/usb/gadget/legacy/nokia.c @@ -118,7 +118,7 @@ static struct usb_function_instance *fi_obex1; static struct usb_function_instance *fi_obex2; static struct usb_function_instance *fi_phonet; -static int __init nokia_bind_config(struct usb_configuration *c) +static int nokia_bind_config(struct usb_configuration *c) { struct usb_function *f_acm; struct usb_function *f_phonet = NULL; @@ -224,7 +224,7 @@ err_get_acm: return status; } -static int __init nokia_bind(struct usb_composite_dev *cdev) +static int nokia_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; int status; @@ -307,7 +307,7 @@ err_usb: return status; } -static int __exit nokia_unbind(struct usb_composite_dev *cdev) +static int nokia_unbind(struct usb_composite_dev *cdev) { if (!IS_ERR_OR_NULL(f_obex1_cfg2)) usb_put_function(f_obex1_cfg2); @@ -338,13 +338,13 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver nokia_driver = { +static struct usb_composite_driver nokia_driver = { .name = "g_nokia", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_HIGH, .bind = nokia_bind, - .unbind = __exit_p(nokia_unbind), + .unbind = nokia_unbind, }; module_usb_composite_driver(nokia_driver); diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c index 90545980542f..1ce7df1060a5 100644 --- a/drivers/usb/gadget/legacy/printer.c +++ b/drivers/usb/gadget/legacy/printer.c @@ -12,29 +12,7 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/moduleparam.h> -#include <linux/fs.h> -#include <linux/poll.h> -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/cdev.h> - #include <asm/byteorder.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/uaccess.h> -#include <asm/unaligned.h> #include <linux/usb/ch9.h> #include <linux/usb/composite.h> @@ -46,50 +24,12 @@ USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_DESC "Printer Gadget" -#define DRIVER_VERSION "2007 OCT 06" +#define DRIVER_VERSION "2015 FEB 17" -static DEFINE_MUTEX(printer_mutex); static const char shortname [] = "printer"; static const char driver_desc [] = DRIVER_DESC; -static dev_t g_printer_devno; - -static struct class *usb_gadget_class; - -/*-------------------------------------------------------------------------*/ - -struct printer_dev { - spinlock_t lock; /* lock this structure */ - /* lock buffer lists during read/write calls */ - struct mutex lock_printer_io; - struct usb_gadget *gadget; - s8 interface; - struct usb_ep *in_ep, *out_ep; - - struct list_head rx_reqs; /* List of free RX structs */ - struct list_head rx_reqs_active; /* List of Active RX xfers */ - struct list_head rx_buffers; /* List of completed xfers */ - /* wait until there is data to be read. */ - wait_queue_head_t rx_wait; - struct list_head tx_reqs; /* List of free TX structs */ - struct list_head tx_reqs_active; /* List of Active TX xfers */ - /* Wait until there are write buffers available to use. */ - wait_queue_head_t tx_wait; - /* Wait until all write buffers have been sent. */ - wait_queue_head_t tx_flush_wait; - struct usb_request *current_rx_req; - size_t current_rx_bytes; - u8 *current_rx_buf; - u8 printer_status; - u8 reset_printer; - struct cdev printer_cdev; - struct device *pdev; - u8 printer_cdev_open; - wait_queue_head_t wait; - struct usb_function function; -}; - -static struct printer_dev usb_printer_gadget; +#include "u_printer.h" /*-------------------------------------------------------------------------*/ @@ -120,6 +60,9 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); #define QLEN qlen +static struct usb_function_instance *fi_printer; +static struct usb_function *f_printer; + /*-------------------------------------------------------------------------*/ /* @@ -127,10 +70,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); * descriptors are built on demand. */ -/* holds our biggest descriptor */ -#define USB_DESC_BUFSIZE 256 -#define USB_BUFSIZE 8192 - static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, @@ -143,108 +82,6 @@ static struct usb_device_descriptor device_desc = { .bNumConfigurations = 1 }; -static struct usb_interface_descriptor intf_desc = { - .bLength = sizeof intf_desc, - .bDescriptorType = USB_DT_INTERFACE, - .bNumEndpoints = 2, - .bInterfaceClass = USB_CLASS_PRINTER, - .bInterfaceSubClass = 1, /* Printer Sub-Class */ - .bInterfaceProtocol = 2, /* Bi-Directional */ - .iInterface = 0 -}; - -static struct usb_endpoint_descriptor fs_ep_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK -}; - -static struct usb_endpoint_descriptor fs_ep_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK -}; - -static struct usb_descriptor_header *fs_printer_function[] = { - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &fs_ep_in_desc, - (struct usb_descriptor_header *) &fs_ep_out_desc, - NULL -}; - -/* - * usb 2.0 devices need to expose both high speed and full speed - * descriptors, unless they only run at full speed. - */ - -static struct usb_endpoint_descriptor hs_ep_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512) -}; - -static struct usb_endpoint_descriptor hs_ep_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512) -}; - -static struct usb_qualifier_descriptor dev_qualifier = { - .bLength = sizeof dev_qualifier, - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PRINTER, - .bNumConfigurations = 1 -}; - -static struct usb_descriptor_header *hs_printer_function[] = { - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &hs_ep_in_desc, - (struct usb_descriptor_header *) &hs_ep_out_desc, - NULL -}; - -/* - * Added endpoint descriptors for 3.0 devices - */ - -static struct usb_endpoint_descriptor ss_ep_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = { - .bLength = sizeof(ss_ep_in_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, -}; - -static struct usb_endpoint_descriptor ss_ep_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(1024), -}; - -static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = { - .bLength = sizeof(ss_ep_out_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, -}; - -static struct usb_descriptor_header *ss_printer_function[] = { - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &ss_ep_in_desc, - (struct usb_descriptor_header *) &ss_ep_in_comp_desc, - (struct usb_descriptor_header *) &ss_ep_out_desc, - (struct usb_descriptor_header *) &ss_ep_out_comp_desc, - NULL -}; - static struct usb_otg_descriptor otg_descriptor = { .bLength = sizeof otg_descriptor, .bDescriptorType = USB_DT_OTG, @@ -256,29 +93,13 @@ static const struct usb_descriptor_header *otg_desc[] = { NULL, }; -/* maxpacket and other transfer characteristics vary by speed. */ -static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget, - struct usb_endpoint_descriptor *fs, - struct usb_endpoint_descriptor *hs, - struct usb_endpoint_descriptor *ss) -{ - switch (gadget->speed) { - case USB_SPEED_SUPER: - return ss; - case USB_SPEED_HIGH: - return hs; - default: - return fs; - } -} - /*-------------------------------------------------------------------------*/ /* descriptors that are built on-demand */ static char product_desc [40] = DRIVER_DESC; static char serial_num [40] = "1"; -static char pnp_string [1024] = +static char pnp_string[PNP_STRING_LEN] = "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"; /* static strings, in UTF-8 */ @@ -299,921 +120,19 @@ static struct usb_gadget_strings *dev_strings[] = { NULL, }; -/*-------------------------------------------------------------------------*/ - -static struct usb_request * -printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags) -{ - struct usb_request *req; - - req = usb_ep_alloc_request(ep, gfp_flags); - - if (req != NULL) { - req->length = len; - req->buf = kmalloc(len, gfp_flags); - if (req->buf == NULL) { - usb_ep_free_request(ep, req); - return NULL; - } - } - - return req; -} - -static void -printer_req_free(struct usb_ep *ep, struct usb_request *req) -{ - if (ep != NULL && req != NULL) { - kfree(req->buf); - usb_ep_free_request(ep, req); - } -} - -/*-------------------------------------------------------------------------*/ - -static void rx_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct printer_dev *dev = ep->driver_data; - int status = req->status; - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - - list_del_init(&req->list); /* Remode from Active List */ - - switch (status) { - - /* normal completion */ - case 0: - if (req->actual > 0) { - list_add_tail(&req->list, &dev->rx_buffers); - DBG(dev, "G_Printer : rx length %d\n", req->actual); - } else { - list_add(&req->list, &dev->rx_reqs); - } - break; - - /* software-driven interface shutdown */ - case -ECONNRESET: /* unlink */ - case -ESHUTDOWN: /* disconnect etc */ - VDBG(dev, "rx shutdown, code %d\n", status); - list_add(&req->list, &dev->rx_reqs); - break; - - /* for hardware automagic (such as pxa) */ - case -ECONNABORTED: /* endpoint reset */ - DBG(dev, "rx %s reset\n", ep->name); - list_add(&req->list, &dev->rx_reqs); - break; - - /* data overrun */ - case -EOVERFLOW: - /* FALLTHROUGH */ - - default: - DBG(dev, "rx status %d\n", status); - list_add(&req->list, &dev->rx_reqs); - break; - } - - wake_up_interruptible(&dev->rx_wait); - spin_unlock_irqrestore(&dev->lock, flags); -} - -static void tx_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct printer_dev *dev = ep->driver_data; - - switch (req->status) { - default: - VDBG(dev, "tx err %d\n", req->status); - /* FALLTHROUGH */ - case -ECONNRESET: /* unlink */ - case -ESHUTDOWN: /* disconnect etc */ - break; - case 0: - break; - } - - spin_lock(&dev->lock); - /* Take the request struct off the active list and put it on the - * free list. - */ - list_del_init(&req->list); - list_add(&req->list, &dev->tx_reqs); - wake_up_interruptible(&dev->tx_wait); - if (likely(list_empty(&dev->tx_reqs_active))) - wake_up_interruptible(&dev->tx_flush_wait); - - spin_unlock(&dev->lock); -} - -/*-------------------------------------------------------------------------*/ - -static int -printer_open(struct inode *inode, struct file *fd) -{ - struct printer_dev *dev; - unsigned long flags; - int ret = -EBUSY; - - mutex_lock(&printer_mutex); - dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); - - spin_lock_irqsave(&dev->lock, flags); - - if (!dev->printer_cdev_open) { - dev->printer_cdev_open = 1; - fd->private_data = dev; - ret = 0; - /* Change the printer status to show that it's on-line. */ - dev->printer_status |= PRINTER_SELECTED; - } - - spin_unlock_irqrestore(&dev->lock, flags); - - DBG(dev, "printer_open returned %x\n", ret); - mutex_unlock(&printer_mutex); - return ret; -} - -static int -printer_close(struct inode *inode, struct file *fd) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - dev->printer_cdev_open = 0; - fd->private_data = NULL; - /* Change printer status to show that the printer is off-line. */ - dev->printer_status &= ~PRINTER_SELECTED; - spin_unlock_irqrestore(&dev->lock, flags); - - DBG(dev, "printer_close\n"); - - return 0; -} - -/* This function must be called with interrupts turned off. */ -static void -setup_rx_reqs(struct printer_dev *dev) -{ - struct usb_request *req; - - while (likely(!list_empty(&dev->rx_reqs))) { - int error; - - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del_init(&req->list); - - /* The USB Host sends us whatever amount of data it wants to - * so we always set the length field to the full USB_BUFSIZE. - * If the amount of data is more than the read() caller asked - * for it will be stored in the request buffer until it is - * asked for by read(). - */ - req->length = USB_BUFSIZE; - req->complete = rx_complete; - - /* here, we unlock, and only unlock, to avoid deadlock. */ - spin_unlock(&dev->lock); - error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); - spin_lock(&dev->lock); - if (error) { - DBG(dev, "rx submit --> %d\n", error); - list_add(&req->list, &dev->rx_reqs); - break; - } - /* if the req is empty, then add it into dev->rx_reqs_active. */ - else if (list_empty(&req->list)) { - list_add(&req->list, &dev->rx_reqs_active); - } - } -} - -static ssize_t -printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - size_t size; - size_t bytes_copied; - struct usb_request *req; - /* This is a pointer to the current USB rx request. */ - struct usb_request *current_rx_req; - /* This is the number of bytes in the current rx buffer. */ - size_t current_rx_bytes; - /* This is a pointer to the current rx buffer. */ - u8 *current_rx_buf; - - if (len == 0) - return -EINVAL; - - DBG(dev, "printer_read trying to read %d bytes\n", (int)len); - - mutex_lock(&dev->lock_printer_io); - spin_lock_irqsave(&dev->lock, flags); - - /* We will use this flag later to check if a printer reset happened - * after we turn interrupts back on. - */ - dev->reset_printer = 0; - - setup_rx_reqs(dev); - - bytes_copied = 0; - current_rx_req = dev->current_rx_req; - current_rx_bytes = dev->current_rx_bytes; - current_rx_buf = dev->current_rx_buf; - dev->current_rx_req = NULL; - dev->current_rx_bytes = 0; - dev->current_rx_buf = NULL; - - /* Check if there is any data in the read buffers. Please note that - * current_rx_bytes is the number of bytes in the current rx buffer. - * If it is zero then check if there are any other rx_buffers that - * are on the completed list. We are only out of data if all rx - * buffers are empty. - */ - if ((current_rx_bytes == 0) && - (likely(list_empty(&dev->rx_buffers)))) { - /* Turn interrupts back on before sleeping. */ - spin_unlock_irqrestore(&dev->lock, flags); - - /* - * If no data is available check if this is a NON-Blocking - * call or not. - */ - if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - /* Sleep until data is available */ - wait_event_interruptible(dev->rx_wait, - (likely(!list_empty(&dev->rx_buffers)))); - spin_lock_irqsave(&dev->lock, flags); - } - - /* We have data to return then copy it to the caller's buffer.*/ - while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers))) - && len) { - if (current_rx_bytes == 0) { - req = container_of(dev->rx_buffers.next, - struct usb_request, list); - list_del_init(&req->list); - - if (req->actual && req->buf) { - current_rx_req = req; - current_rx_bytes = req->actual; - current_rx_buf = req->buf; - } else { - list_add(&req->list, &dev->rx_reqs); - continue; - } - } - - /* Don't leave irqs off while doing memory copies */ - spin_unlock_irqrestore(&dev->lock, flags); - - if (len > current_rx_bytes) - size = current_rx_bytes; - else - size = len; - - size -= copy_to_user(buf, current_rx_buf, size); - bytes_copied += size; - len -= size; - buf += size; - - spin_lock_irqsave(&dev->lock, flags); - - /* We've disconnected or reset so return. */ - if (dev->reset_printer) { - list_add(¤t_rx_req->list, &dev->rx_reqs); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - /* If we not returning all the data left in this RX request - * buffer then adjust the amount of data left in the buffer. - * Othewise if we are done with this RX request buffer then - * requeue it to get any incoming data from the USB host. - */ - if (size < current_rx_bytes) { - current_rx_bytes -= size; - current_rx_buf += size; - } else { - list_add(¤t_rx_req->list, &dev->rx_reqs); - current_rx_bytes = 0; - current_rx_buf = NULL; - current_rx_req = NULL; - } - } - - dev->current_rx_req = current_rx_req; - dev->current_rx_bytes = current_rx_bytes; - dev->current_rx_buf = current_rx_buf; - - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - - DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); - - if (bytes_copied) - return bytes_copied; - else - return -EAGAIN; -} - -static ssize_t -printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - size_t size; /* Amount of data in a TX request. */ - size_t bytes_copied = 0; - struct usb_request *req; - - DBG(dev, "printer_write trying to send %d bytes\n", (int)len); - - if (len == 0) - return -EINVAL; - - mutex_lock(&dev->lock_printer_io); - spin_lock_irqsave(&dev->lock, flags); - - /* Check if a printer reset happens while we have interrupts on */ - dev->reset_printer = 0; - - /* Check if there is any available write buffers */ - if (likely(list_empty(&dev->tx_reqs))) { - /* Turn interrupts back on before sleeping. */ - spin_unlock_irqrestore(&dev->lock, flags); - - /* - * If write buffers are available check if this is - * a NON-Blocking call or not. - */ - if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - /* Sleep until a write buffer is available */ - wait_event_interruptible(dev->tx_wait, - (likely(!list_empty(&dev->tx_reqs)))); - spin_lock_irqsave(&dev->lock, flags); - } - - while (likely(!list_empty(&dev->tx_reqs)) && len) { - - if (len > USB_BUFSIZE) - size = USB_BUFSIZE; - else - size = len; - - req = container_of(dev->tx_reqs.next, struct usb_request, - list); - list_del_init(&req->list); - - req->complete = tx_complete; - req->length = size; - - /* Check if we need to send a zero length packet. */ - if (len > size) - /* They will be more TX requests so no yet. */ - req->zero = 0; - else - /* If the data amount is not a multple of the - * maxpacket size then send a zero length packet. - */ - req->zero = ((len % dev->in_ep->maxpacket) == 0); - - /* Don't leave irqs off while doing memory copies */ - spin_unlock_irqrestore(&dev->lock, flags); - - if (copy_from_user(req->buf, buf, size)) { - list_add(&req->list, &dev->tx_reqs); - mutex_unlock(&dev->lock_printer_io); - return bytes_copied; - } - - bytes_copied += size; - len -= size; - buf += size; - - spin_lock_irqsave(&dev->lock, flags); - - /* We've disconnected or reset so free the req and buffer */ - if (dev->reset_printer) { - list_add(&req->list, &dev->tx_reqs); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { - list_add(&req->list, &dev->tx_reqs); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - return -EAGAIN; - } - - list_add(&req->list, &dev->tx_reqs_active); - - } - - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - - DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); - - if (bytes_copied) { - return bytes_copied; - } else { - return -EAGAIN; - } -} - -static int -printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync) -{ - struct printer_dev *dev = fd->private_data; - struct inode *inode = file_inode(fd); - unsigned long flags; - int tx_list_empty; - - mutex_lock(&inode->i_mutex); - spin_lock_irqsave(&dev->lock, flags); - tx_list_empty = (likely(list_empty(&dev->tx_reqs))); - spin_unlock_irqrestore(&dev->lock, flags); - - if (!tx_list_empty) { - /* Sleep until all data has been sent */ - wait_event_interruptible(dev->tx_flush_wait, - (likely(list_empty(&dev->tx_reqs_active)))); - } - mutex_unlock(&inode->i_mutex); - - return 0; -} - -static unsigned int -printer_poll(struct file *fd, poll_table *wait) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - int status = 0; - - mutex_lock(&dev->lock_printer_io); - spin_lock_irqsave(&dev->lock, flags); - setup_rx_reqs(dev); - spin_unlock_irqrestore(&dev->lock, flags); - mutex_unlock(&dev->lock_printer_io); - - poll_wait(fd, &dev->rx_wait, wait); - poll_wait(fd, &dev->tx_wait, wait); - - spin_lock_irqsave(&dev->lock, flags); - if (likely(!list_empty(&dev->tx_reqs))) - status |= POLLOUT | POLLWRNORM; - - if (likely(dev->current_rx_bytes) || - likely(!list_empty(&dev->rx_buffers))) - status |= POLLIN | POLLRDNORM; - - spin_unlock_irqrestore(&dev->lock, flags); - - return status; -} - -static long -printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) -{ - struct printer_dev *dev = fd->private_data; - unsigned long flags; - int status = 0; - - DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg); - - /* handle ioctls */ - - spin_lock_irqsave(&dev->lock, flags); - - switch (code) { - case GADGET_GET_PRINTER_STATUS: - status = (int)dev->printer_status; - break; - case GADGET_SET_PRINTER_STATUS: - dev->printer_status = (u8)arg; - break; - default: - /* could not handle ioctl */ - DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n", - code); - status = -ENOTTY; - } - - spin_unlock_irqrestore(&dev->lock, flags); - - return status; -} - -/* used after endpoint configuration */ -static const struct file_operations printer_io_operations = { - .owner = THIS_MODULE, - .open = printer_open, - .read = printer_read, - .write = printer_write, - .fsync = printer_fsync, - .poll = printer_poll, - .unlocked_ioctl = printer_ioctl, - .release = printer_close, - .llseek = noop_llseek, -}; - -/*-------------------------------------------------------------------------*/ - -static int -set_printer_interface(struct printer_dev *dev) -{ - int result = 0; - - dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc, - &ss_ep_in_desc); - dev->in_ep->driver_data = dev; - - dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc, - &hs_ep_out_desc, &ss_ep_out_desc); - dev->out_ep->driver_data = dev; - - result = usb_ep_enable(dev->in_ep); - if (result != 0) { - DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); - goto done; - } - - result = usb_ep_enable(dev->out_ep); - if (result != 0) { - DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); - goto done; - } - -done: - /* on error, disable any endpoints */ - if (result != 0) { - (void) usb_ep_disable(dev->in_ep); - (void) usb_ep_disable(dev->out_ep); - dev->in_ep->desc = NULL; - dev->out_ep->desc = NULL; - } - - /* caller is responsible for cleanup on error */ - return result; -} - -static void printer_reset_interface(struct printer_dev *dev) -{ - if (dev->interface < 0) - return; - - DBG(dev, "%s\n", __func__); - - if (dev->in_ep->desc) - usb_ep_disable(dev->in_ep); - - if (dev->out_ep->desc) - usb_ep_disable(dev->out_ep); - - dev->in_ep->desc = NULL; - dev->out_ep->desc = NULL; - dev->interface = -1; -} - -/* Change our operational Interface. */ -static int set_interface(struct printer_dev *dev, unsigned number) -{ - int result = 0; - - /* Free the current interface */ - printer_reset_interface(dev); - - result = set_printer_interface(dev); - if (result) - printer_reset_interface(dev); - else - dev->interface = number; - - if (!result) - INFO(dev, "Using interface %x\n", number); - - return result; -} - -static void printer_soft_reset(struct printer_dev *dev) -{ - struct usb_request *req; - - INFO(dev, "Received Printer Reset Request\n"); - - if (usb_ep_disable(dev->in_ep)) - DBG(dev, "Failed to disable USB in_ep\n"); - if (usb_ep_disable(dev->out_ep)) - DBG(dev, "Failed to disable USB out_ep\n"); - - if (dev->current_rx_req != NULL) { - list_add(&dev->current_rx_req->list, &dev->rx_reqs); - dev->current_rx_req = NULL; - } - dev->current_rx_bytes = 0; - dev->current_rx_buf = NULL; - dev->reset_printer = 1; - - while (likely(!(list_empty(&dev->rx_buffers)))) { - req = container_of(dev->rx_buffers.next, struct usb_request, - list); - list_del_init(&req->list); - list_add(&req->list, &dev->rx_reqs); - } - - while (likely(!(list_empty(&dev->rx_reqs_active)))) { - req = container_of(dev->rx_buffers.next, struct usb_request, - list); - list_del_init(&req->list); - list_add(&req->list, &dev->rx_reqs); - } - - while (likely(!(list_empty(&dev->tx_reqs_active)))) { - req = container_of(dev->tx_reqs_active.next, - struct usb_request, list); - list_del_init(&req->list); - list_add(&req->list, &dev->tx_reqs); - } - - if (usb_ep_enable(dev->in_ep)) - DBG(dev, "Failed to enable USB in_ep\n"); - if (usb_ep_enable(dev->out_ep)) - DBG(dev, "Failed to enable USB out_ep\n"); - - wake_up_interruptible(&dev->rx_wait); - wake_up_interruptible(&dev->tx_wait); - wake_up_interruptible(&dev->tx_flush_wait); -} - -/*-------------------------------------------------------------------------*/ - -/* - * The setup() callback implements all the ep0 functionality that's not - * handled lower down. - */ -static int printer_func_setup(struct usb_function *f, - const struct usb_ctrlrequest *ctrl) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - struct usb_composite_dev *cdev = f->config->cdev; - struct usb_request *req = cdev->req; - int value = -EOPNOTSUPP; - u16 wIndex = le16_to_cpu(ctrl->wIndex); - u16 wValue = le16_to_cpu(ctrl->wValue); - u16 wLength = le16_to_cpu(ctrl->wLength); - - DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); - - switch (ctrl->bRequestType&USB_TYPE_MASK) { - case USB_TYPE_CLASS: - switch (ctrl->bRequest) { - case 0: /* Get the IEEE-1284 PNP String */ - /* Only one printer interface is supported. */ - if ((wIndex>>8) != dev->interface) - break; - - value = (pnp_string[0]<<8)|pnp_string[1]; - memcpy(req->buf, pnp_string, value); - DBG(dev, "1284 PNP String: %x %s\n", value, - &pnp_string[2]); - break; - - case 1: /* Get Port Status */ - /* Only one printer interface is supported. */ - if (wIndex != dev->interface) - break; - - *(u8 *)req->buf = dev->printer_status; - value = min(wLength, (u16) 1); - break; - - case 2: /* Soft Reset */ - /* Only one printer interface is supported. */ - if (wIndex != dev->interface) - break; - - printer_soft_reset(dev); - - value = 0; - break; - - default: - goto unknown; - } - break; - - default: -unknown: - VDBG(dev, - "unknown ctrl req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - wValue, wIndex, wLength); - break; - } - /* host either stalls (value < 0) or reports success */ - return value; -} - -static int __init printer_func_bind(struct usb_configuration *c, - struct usb_function *f) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - struct usb_composite_dev *cdev = c->cdev; - struct usb_ep *in_ep; - struct usb_ep *out_ep = NULL; - int id; - int ret; - - id = usb_interface_id(c, f); - if (id < 0) - return id; - intf_desc.bInterfaceNumber = id; - - /* all we really need is bulk IN/OUT */ - in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc); - if (!in_ep) { -autoconf_fail: - dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n", - cdev->gadget->name); - return -ENODEV; - } - in_ep->driver_data = in_ep; /* claim */ - - out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc); - if (!out_ep) - goto autoconf_fail; - out_ep->driver_data = out_ep; /* claim */ - - /* assumes that all endpoints are dual-speed */ - hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; - hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; - ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; - ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; - - ret = usb_assign_descriptors(f, fs_printer_function, - hs_printer_function, ss_printer_function); - if (ret) - return ret; - - dev->in_ep = in_ep; - dev->out_ep = out_ep; - return 0; -} - -static void printer_func_unbind(struct usb_configuration *c, - struct usb_function *f) -{ - usb_free_all_descriptors(f); -} - -static int printer_func_set_alt(struct usb_function *f, - unsigned intf, unsigned alt) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - int ret = -ENOTSUPP; - - if (!alt) - ret = set_interface(dev, intf); - - return ret; -} - -static void printer_func_disable(struct usb_function *f) -{ - struct printer_dev *dev = container_of(f, struct printer_dev, function); - unsigned long flags; - - DBG(dev, "%s\n", __func__); - - spin_lock_irqsave(&dev->lock, flags); - printer_reset_interface(dev); - spin_unlock_irqrestore(&dev->lock, flags); -} - -static void printer_cfg_unbind(struct usb_configuration *c) -{ - struct printer_dev *dev; - struct usb_request *req; - - dev = &usb_printer_gadget; - - DBG(dev, "%s\n", __func__); - - /* Remove sysfs files */ - device_destroy(usb_gadget_class, g_printer_devno); - - /* Remove Character Device */ - cdev_del(&dev->printer_cdev); - - /* we must already have been disconnected ... no i/o may be active */ - WARN_ON(!list_empty(&dev->tx_reqs_active)); - WARN_ON(!list_empty(&dev->rx_reqs_active)); - - /* Free all memory for this driver. */ - while (!list_empty(&dev->tx_reqs)) { - req = container_of(dev->tx_reqs.next, struct usb_request, - list); - list_del(&req->list); - printer_req_free(dev->in_ep, req); - } - - if (dev->current_rx_req != NULL) - printer_req_free(dev->out_ep, dev->current_rx_req); - - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->out_ep, req); - } - - while (!list_empty(&dev->rx_buffers)) { - req = container_of(dev->rx_buffers.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->out_ep, req); - } -} - static struct usb_configuration printer_cfg_driver = { .label = "printer", - .unbind = printer_cfg_unbind, .bConfigurationValue = 1, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, }; -static int __init printer_bind_config(struct usb_configuration *c) +static int printer_do_config(struct usb_configuration *c) { struct usb_gadget *gadget = c->cdev->gadget; - struct printer_dev *dev; - int status = -ENOMEM; - size_t len; - u32 i; - struct usb_request *req; + int status = 0; usb_ep_autoconfig_reset(gadget); - dev = &usb_printer_gadget; - - dev->function.name = shortname; - dev->function.bind = printer_func_bind; - dev->function.setup = printer_func_setup; - dev->function.unbind = printer_func_unbind; - dev->function.set_alt = printer_func_set_alt; - dev->function.disable = printer_func_disable; - - status = usb_add_function(c, &dev->function); - if (status) - return status; - - /* Setup the sysfs files for the printer gadget. */ - dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, - NULL, "g_printer"); - if (IS_ERR(dev->pdev)) { - ERROR(dev, "Failed to create device: g_printer\n"); - status = PTR_ERR(dev->pdev); - goto fail; - } - - /* - * Register a character device as an interface to a user mode - * program that handles the printer specific functionality. - */ - cdev_init(&dev->printer_cdev, &printer_io_operations); - dev->printer_cdev.owner = THIS_MODULE; - status = cdev_add(&dev->printer_cdev, g_printer_devno, 1); - if (status) { - ERROR(dev, "Failed to open char device\n"); - goto fail; - } - - if (iPNPstring) - strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2); - - len = strlen(pnp_string); - pnp_string[0] = (len >> 8) & 0xFF; - pnp_string[1] = len & 0xFF; - usb_gadget_set_selfpowered(gadget); if (gadget_is_otg(gadget)) { @@ -1222,87 +141,65 @@ static int __init printer_bind_config(struct usb_configuration *c) printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - spin_lock_init(&dev->lock); - mutex_init(&dev->lock_printer_io); - INIT_LIST_HEAD(&dev->tx_reqs); - INIT_LIST_HEAD(&dev->tx_reqs_active); - INIT_LIST_HEAD(&dev->rx_reqs); - INIT_LIST_HEAD(&dev->rx_reqs_active); - INIT_LIST_HEAD(&dev->rx_buffers); - init_waitqueue_head(&dev->rx_wait); - init_waitqueue_head(&dev->tx_wait); - init_waitqueue_head(&dev->tx_flush_wait); - - dev->interface = -1; - dev->printer_cdev_open = 0; - dev->printer_status = PRINTER_NOT_ERROR; - dev->current_rx_req = NULL; - dev->current_rx_bytes = 0; - dev->current_rx_buf = NULL; - - for (i = 0; i < QLEN; i++) { - req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); - if (!req) { - while (!list_empty(&dev->tx_reqs)) { - req = container_of(dev->tx_reqs.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->in_ep, req); - } - return -ENOMEM; - } - list_add(&req->list, &dev->tx_reqs); - } - - for (i = 0; i < QLEN; i++) { - req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL); - if (!req) { - while (!list_empty(&dev->rx_reqs)) { - req = container_of(dev->rx_reqs.next, - struct usb_request, list); - list_del(&req->list); - printer_req_free(dev->out_ep, req); - } - return -ENOMEM; - } - list_add(&req->list, &dev->rx_reqs); - } - - /* finish hookup to lower layer ... */ - dev->gadget = gadget; + f_printer = usb_get_function(fi_printer); + if (IS_ERR(f_printer)) + return PTR_ERR(f_printer); - INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); - return 0; + status = usb_add_function(c, f_printer); + if (status < 0) + usb_put_function(f_printer); -fail: - printer_cfg_unbind(c); return status; } -static int printer_unbind(struct usb_composite_dev *cdev) +static int printer_bind(struct usb_composite_dev *cdev) { - return 0; -} + struct f_printer_opts *opts; + int ret, len; -static int __init printer_bind(struct usb_composite_dev *cdev) -{ - int ret; + fi_printer = usb_get_function_instance("printer"); + if (IS_ERR(fi_printer)) + return PTR_ERR(fi_printer); + + if (iPNPstring) + strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2); + + len = strlen(pnp_string); + pnp_string[0] = (len >> 8) & 0xFF; + pnp_string[1] = len & 0xFF; + + opts = container_of(fi_printer, struct f_printer_opts, func_inst); + opts->minor = 0; + memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN); + opts->q_len = QLEN; ret = usb_string_ids_tab(cdev, strings); - if (ret < 0) + if (ret < 0) { + usb_put_function_instance(fi_printer); return ret; + } device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id; device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id; device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id; - ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); - if (ret) + ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config); + if (ret) { + usb_put_function_instance(fi_printer); return ret; + } usb_composite_overwrite_options(cdev, &coverwrite); return ret; } -static __refdata struct usb_composite_driver printer_driver = { +static int printer_unbind(struct usb_composite_dev *cdev) +{ + usb_put_function(f_printer); + usb_put_function_instance(fi_printer); + + return 0; +} + +static struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, .strings = dev_strings, @@ -1311,47 +208,7 @@ static __refdata struct usb_composite_driver printer_driver = { .unbind = printer_unbind, }; -static int __init -init(void) -{ - int status; - - usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); - if (IS_ERR(usb_gadget_class)) { - status = PTR_ERR(usb_gadget_class); - pr_err("unable to create usb_gadget class %d\n", status); - return status; - } - - status = alloc_chrdev_region(&g_printer_devno, 0, 1, - "USB printer gadget"); - if (status) { - pr_err("alloc_chrdev_region %d\n", status); - class_destroy(usb_gadget_class); - return status; - } - - status = usb_composite_probe(&printer_driver); - if (status) { - class_destroy(usb_gadget_class); - unregister_chrdev_region(g_printer_devno, 1); - pr_err("usb_gadget_probe_driver %x\n", status); - } - - return status; -} -module_init(init); - -static void __exit -cleanup(void) -{ - mutex_lock(&usb_printer_gadget.lock_printer_io); - usb_composite_unregister(&printer_driver); - unregister_chrdev_region(g_printer_devno, 1); - class_destroy(usb_gadget_class); - mutex_unlock(&usb_printer_gadget.lock_printer_io); -} -module_exit(cleanup); +module_usb_composite_driver(printer_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Craig Nadler"); diff --git a/drivers/usb/gadget/legacy/serial.c b/drivers/usb/gadget/legacy/serial.c index 1f5f978d35d5..8b7528f9b78e 100644 --- a/drivers/usb/gadget/legacy/serial.c +++ b/drivers/usb/gadget/legacy/serial.c @@ -174,7 +174,7 @@ out: return ret; } -static int __init gs_bind(struct usb_composite_dev *cdev) +static int gs_bind(struct usb_composite_dev *cdev) { int status; @@ -230,7 +230,7 @@ static int gs_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver gserial_driver = { +static struct usb_composite_driver gserial_driver = { .name = "g_serial", .dev = &device_desc, .strings = dev_strings, diff --git a/drivers/usb/gadget/legacy/tcm_usb_gadget.c b/drivers/usb/gadget/legacy/tcm_usb_gadget.c index 6e0a019aad54..c3c48088fced 100644 --- a/drivers/usb/gadget/legacy/tcm_usb_gadget.c +++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.c @@ -16,12 +16,10 @@ #include <linux/usb/composite.h> #include <linux/usb/gadget.h> #include <linux/usb/storage.h> -#include <scsi/scsi.h> #include <scsi/scsi_tcq.h> #include <target/target_core_base.h> #include <target/target_core_fabric.h> #include <target/target_core_fabric_configfs.h> -#include <target/target_core_configfs.h> #include <target/configfs_macros.h> #include <asm/unaligned.h> @@ -29,8 +27,6 @@ USB_GADGET_COMPOSITE_OPTIONS(); -static struct target_fabric_configfs *usbg_fabric_configfs; - static inline struct f_uas *to_f_uas(struct usb_function *f) { return container_of(f, struct f_uas, function); @@ -1112,6 +1108,7 @@ static int usbg_submit_command(struct f_uas *fu, memcpy(cmd->cmd_buf, cmd_iu->cdb, cmd_len); cmd->tag = be16_to_cpup(&cmd_iu->tag); + cmd->se_cmd.tag = cmd->tag; if (fu->flags & USBG_USE_STREAMS) { if (cmd->tag > UASP_SS_EP_COMP_NUM_STREAMS) goto err; @@ -1245,6 +1242,7 @@ static int bot_submit_command(struct f_uas *fu, cmd->unpacked_lun = cbw->Lun; cmd->is_read = cbw->Flags & US_BULK_FLAG_IN ? 1 : 0; cmd->data_len = le32_to_cpu(cbw->DataTransferLength); + cmd->se_cmd.tag = le32_to_cpu(cmd->bot_tag); INIT_WORK(&cmd->work, bot_cmd_work); ret = queue_work(tpg->workqueue, &cmd->work); @@ -1274,23 +1272,6 @@ static char *usbg_get_fabric_name(void) return "usb_gadget"; } -static u8 usbg_get_fabric_proto_ident(struct se_portal_group *se_tpg) -{ - struct usbg_tpg *tpg = container_of(se_tpg, - struct usbg_tpg, se_tpg); - struct usbg_tport *tport = tpg->tport; - u8 proto_id; - - switch (tport->tport_proto_id) { - case SCSI_PROTOCOL_SAS: - default: - proto_id = sas_get_fabric_proto_ident(se_tpg); - break; - } - - return proto_id; -} - static char *usbg_get_fabric_wwn(struct se_portal_group *se_tpg) { struct usbg_tpg *tpg = container_of(se_tpg, @@ -1307,97 +1288,6 @@ static u16 usbg_get_tag(struct se_portal_group *se_tpg) return tpg->tport_tpgt; } -static u32 usbg_get_default_depth(struct se_portal_group *se_tpg) -{ - return 1; -} - -static u32 usbg_get_pr_transport_id( - struct se_portal_group *se_tpg, - struct se_node_acl *se_nacl, - struct t10_pr_registration *pr_reg, - int *format_code, - unsigned char *buf) -{ - struct usbg_tpg *tpg = container_of(se_tpg, - struct usbg_tpg, se_tpg); - struct usbg_tport *tport = tpg->tport; - int ret = 0; - - switch (tport->tport_proto_id) { - case SCSI_PROTOCOL_SAS: - default: - ret = sas_get_pr_transport_id(se_tpg, se_nacl, pr_reg, - format_code, buf); - break; - } - - return ret; -} - -static u32 usbg_get_pr_transport_id_len( - struct se_portal_group *se_tpg, - struct se_node_acl *se_nacl, - struct t10_pr_registration *pr_reg, - int *format_code) -{ - struct usbg_tpg *tpg = container_of(se_tpg, - struct usbg_tpg, se_tpg); - struct usbg_tport *tport = tpg->tport; - int ret = 0; - - switch (tport->tport_proto_id) { - case SCSI_PROTOCOL_SAS: - default: - ret = sas_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, - format_code); - break; - } - - return ret; -} - -static char *usbg_parse_pr_out_transport_id( - struct se_portal_group *se_tpg, - const char *buf, - u32 *out_tid_len, - char **port_nexus_ptr) -{ - struct usbg_tpg *tpg = container_of(se_tpg, - struct usbg_tpg, se_tpg); - struct usbg_tport *tport = tpg->tport; - char *tid = NULL; - - switch (tport->tport_proto_id) { - case SCSI_PROTOCOL_SAS: - default: - tid = sas_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, - port_nexus_ptr); - } - - return tid; -} - -static struct se_node_acl *usbg_alloc_fabric_acl(struct se_portal_group *se_tpg) -{ - struct usbg_nacl *nacl; - - nacl = kzalloc(sizeof(struct usbg_nacl), GFP_KERNEL); - if (!nacl) - return NULL; - - return &nacl->se_node_acl; -} - -static void usbg_release_fabric_acl( - struct se_portal_group *se_tpg, - struct se_node_acl *se_nacl) -{ - struct usbg_nacl *nacl = container_of(se_nacl, - struct usbg_nacl, se_node_acl); - kfree(nacl); -} - static u32 usbg_tpg_get_inst_index(struct se_portal_group *se_tpg) { return 1; @@ -1448,18 +1338,6 @@ static void usbg_set_default_node_attrs(struct se_node_acl *nacl) return; } -static u32 usbg_get_task_tag(struct se_cmd *se_cmd) -{ - struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, - se_cmd); - struct f_uas *fu = cmd->fu; - - if (fu->flags & USBG_IS_BOT) - return le32_to_cpu(cmd->bot_tag); - else - return cmd->tag; -} - static int usbg_get_cmd_state(struct se_cmd *se_cmd) { return 0; @@ -1489,50 +1367,11 @@ static const char *usbg_check_wwn(const char *name) return n; } -static struct se_node_acl *usbg_make_nodeacl( - struct se_portal_group *se_tpg, - struct config_group *group, - const char *name) -{ - struct se_node_acl *se_nacl, *se_nacl_new; - struct usbg_nacl *nacl; - u64 wwpn = 0; - u32 nexus_depth; - const char *wnn_name; - - wnn_name = usbg_check_wwn(name); - if (!wnn_name) - return ERR_PTR(-EINVAL); - se_nacl_new = usbg_alloc_fabric_acl(se_tpg); - if (!(se_nacl_new)) - return ERR_PTR(-ENOMEM); - - nexus_depth = 1; - /* - * se_nacl_new may be released by core_tpg_add_initiator_node_acl() - * when converting a NodeACL from demo mode -> explict - */ - se_nacl = core_tpg_add_initiator_node_acl(se_tpg, se_nacl_new, - name, nexus_depth); - if (IS_ERR(se_nacl)) { - usbg_release_fabric_acl(se_tpg, se_nacl_new); - return se_nacl; - } - /* - * Locate our struct usbg_nacl and set the FC Nport WWPN - */ - nacl = container_of(se_nacl, struct usbg_nacl, se_node_acl); - nacl->iport_wwpn = wwpn; - snprintf(nacl->iport_name, sizeof(nacl->iport_name), "%s", name); - return se_nacl; -} - -static void usbg_drop_nodeacl(struct se_node_acl *se_acl) +static int usbg_init_nodeacl(struct se_node_acl *se_nacl, const char *name) { - struct usbg_nacl *nacl = container_of(se_acl, - struct usbg_nacl, se_node_acl); - core_tpg_del_initiator_node_acl(se_acl->se_tpg, se_acl, 1); - kfree(nacl); + if (!usbg_check_wwn(name)) + return -EINVAL; + return 0; } struct usbg_tpg *the_only_tpg_I_currently_have; @@ -1572,9 +1411,11 @@ static struct se_portal_group *usbg_make_tpg( tpg->tport = tport; tpg->tport_tpgt = tpgt; - ret = core_tpg_register(&usbg_fabric_configfs->tf_ops, wwn, - &tpg->se_tpg, tpg, - TRANSPORT_TPG_TYPE_NORMAL); + /* + * SPC doesn't assign a protocol identifier for USB-SCSI, so we + * pretend to be SAS.. + */ + ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS); if (ret < 0) { destroy_workqueue(tpg->workqueue); kfree(tpg); @@ -1864,21 +1705,16 @@ static int usbg_check_stop_free(struct se_cmd *se_cmd) return 1; } -static struct target_core_fabric_ops usbg_ops = { +static const struct target_core_fabric_ops usbg_ops = { + .module = THIS_MODULE, + .name = "usb_gadget", .get_fabric_name = usbg_get_fabric_name, - .get_fabric_proto_ident = usbg_get_fabric_proto_ident, .tpg_get_wwn = usbg_get_fabric_wwn, .tpg_get_tag = usbg_get_tag, - .tpg_get_default_depth = usbg_get_default_depth, - .tpg_get_pr_transport_id = usbg_get_pr_transport_id, - .tpg_get_pr_transport_id_len = usbg_get_pr_transport_id_len, - .tpg_parse_pr_out_transport_id = usbg_parse_pr_out_transport_id, .tpg_check_demo_mode = usbg_check_true, .tpg_check_demo_mode_cache = usbg_check_false, .tpg_check_demo_mode_write_protect = usbg_check_false, .tpg_check_prod_mode_write_protect = usbg_check_false, - .tpg_alloc_fabric_acl = usbg_alloc_fabric_acl, - .tpg_release_fabric_acl = usbg_release_fabric_acl, .tpg_get_inst_index = usbg_tpg_get_inst_index, .release_cmd = usbg_release_cmd, .shutdown_session = usbg_shutdown_session, @@ -1888,7 +1724,6 @@ static struct target_core_fabric_ops usbg_ops = { .write_pending = usbg_send_write_request, .write_pending_status = usbg_write_pending_status, .set_default_node_attributes = usbg_set_default_node_attrs, - .get_task_tag = usbg_get_task_tag, .get_cmd_state = usbg_get_cmd_state, .queue_data_in = usbg_send_read_response, .queue_status = usbg_send_status_response, @@ -1902,50 +1737,10 @@ static struct target_core_fabric_ops usbg_ops = { .fabric_drop_tpg = usbg_drop_tpg, .fabric_post_link = usbg_port_link, .fabric_pre_unlink = usbg_port_unlink, - .fabric_make_np = NULL, - .fabric_drop_np = NULL, - .fabric_make_nodeacl = usbg_make_nodeacl, - .fabric_drop_nodeacl = usbg_drop_nodeacl, -}; + .fabric_init_nodeacl = usbg_init_nodeacl, -static int usbg_register_configfs(void) -{ - struct target_fabric_configfs *fabric; - int ret; - - fabric = target_fabric_configfs_init(THIS_MODULE, "usb_gadget"); - if (IS_ERR(fabric)) { - printk(KERN_ERR "target_fabric_configfs_init() failed\n"); - return PTR_ERR(fabric); - } - - fabric->tf_ops = usbg_ops; - fabric->tf_cit_tmpl.tfc_wwn_cit.ct_attrs = usbg_wwn_attrs; - fabric->tf_cit_tmpl.tfc_tpg_base_cit.ct_attrs = usbg_base_attrs; - fabric->tf_cit_tmpl.tfc_tpg_attrib_cit.ct_attrs = NULL; - fabric->tf_cit_tmpl.tfc_tpg_param_cit.ct_attrs = NULL; - fabric->tf_cit_tmpl.tfc_tpg_np_base_cit.ct_attrs = NULL; - fabric->tf_cit_tmpl.tfc_tpg_nacl_base_cit.ct_attrs = NULL; - fabric->tf_cit_tmpl.tfc_tpg_nacl_attrib_cit.ct_attrs = NULL; - fabric->tf_cit_tmpl.tfc_tpg_nacl_auth_cit.ct_attrs = NULL; - fabric->tf_cit_tmpl.tfc_tpg_nacl_param_cit.ct_attrs = NULL; - ret = target_fabric_configfs_register(fabric); - if (ret < 0) { - printk(KERN_ERR "target_fabric_configfs_register() failed" - " for usb-gadget\n"); - return ret; - } - usbg_fabric_configfs = fabric; - return 0; -}; - -static void usbg_deregister_configfs(void) -{ - if (!(usbg_fabric_configfs)) - return; - - target_fabric_configfs_deregister(usbg_fabric_configfs); - usbg_fabric_configfs = NULL; + .tfc_wwn_attrs = usbg_wwn_attrs, + .tfc_tpg_base_attrs = usbg_base_attrs, }; /* Start gadget.c code */ @@ -2433,7 +2228,7 @@ static int usb_target_bind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver usbg_driver = { +static struct usb_composite_driver usbg_driver = { .name = "g_target", .dev = &usbg_device_desc, .strings = usbg_strings, @@ -2454,16 +2249,13 @@ static void usbg_detach(struct usbg_tpg *tpg) static int __init usb_target_gadget_init(void) { - int ret; - - ret = usbg_register_configfs(); - return ret; + return target_register_template(&usbg_ops); } module_init(usb_target_gadget_init); static void __exit usb_target_gadget_exit(void) { - usbg_deregister_configfs(); + target_unregister_template(&usbg_ops); } module_exit(usb_target_gadget_exit); diff --git a/drivers/usb/gadget/legacy/tcm_usb_gadget.h b/drivers/usb/gadget/legacy/tcm_usb_gadget.h index 8289219925b8..0b749e1aa2f1 100644 --- a/drivers/usb/gadget/legacy/tcm_usb_gadget.h +++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.h @@ -6,7 +6,6 @@ #include <linux/usb/composite.h> #include <linux/usb/uas.h> #include <linux/usb/storage.h> -#include <scsi/scsi.h> #include <target/target_core_base.h> #include <target/target_core_fabric.h> @@ -25,15 +24,6 @@ enum { #define USB_G_ALT_INT_BBB 0 #define USB_G_ALT_INT_UAS 1 -struct usbg_nacl { - /* Binary World Wide unique Port Name for SAS Initiator port */ - u64 iport_wwpn; - /* ASCII formatted WWPN for Sas Initiator port */ - char iport_name[USBG_NAMELEN]; - /* Returned by usbg_make_nodeacl() */ - struct se_node_acl se_node_acl; -}; - struct tcm_usbg_nexus { struct se_session *tvn_se_sess; }; @@ -53,8 +43,6 @@ struct usbg_tpg { }; struct usbg_tport { - /* SCSI protocol the tport is providing */ - u8 tport_proto_id; /* Binary World Wide unique Port Name for SAS Target port */ u64 tport_wwpn; /* ASCII formatted WWPN for SAS Target port */ diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c index 04a3da20f742..72c976bf3530 100644 --- a/drivers/usb/gadget/legacy/webcam.c +++ b/drivers/usb/gadget/legacy/webcam.c @@ -334,7 +334,7 @@ static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = { * USB configuration */ -static int __init +static int webcam_config_bind(struct usb_configuration *c) { int status = 0; @@ -358,7 +358,7 @@ static struct usb_configuration webcam_config_driver = { .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW, }; -static int /* __init_or_exit */ +static int webcam_unbind(struct usb_composite_dev *cdev) { if (!IS_ERR_OR_NULL(f_uvc)) @@ -368,7 +368,7 @@ webcam_unbind(struct usb_composite_dev *cdev) return 0; } -static int __init +static int webcam_bind(struct usb_composite_dev *cdev) { struct f_uvc_opts *uvc_opts; @@ -422,7 +422,7 @@ error: * Driver */ -static __refdata struct usb_composite_driver webcam_driver = { +static struct usb_composite_driver webcam_driver = { .name = "g_webcam", .dev = &webcam_device_descriptor, .strings = webcam_device_strings, diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c index 5ee95152493c..c986e8addb90 100644 --- a/drivers/usb/gadget/legacy/zero.c +++ b/drivers/usb/gadget/legacy/zero.c @@ -272,7 +272,7 @@ static struct usb_function_instance *func_inst_lb; module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(qlen, "depth of loopback queue"); -static int __init zero_bind(struct usb_composite_dev *cdev) +static int zero_bind(struct usb_composite_dev *cdev) { struct f_ss_opts *ss_opts; struct f_lb_opts *lb_opts; @@ -400,7 +400,7 @@ static int zero_unbind(struct usb_composite_dev *cdev) return 0; } -static __refdata struct usb_composite_driver zero_driver = { +static struct usb_composite_driver zero_driver = { .name = "zero", .dev = &device_desc, .strings = dev_strings, diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index 2fbedca3c2b4..fc4226462f8f 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -1942,7 +1942,7 @@ err_unprepare_fclk: return retval; } -static int __exit at91udc_remove(struct platform_device *pdev) +static int at91udc_remove(struct platform_device *pdev) { struct at91_udc *udc = platform_get_drvdata(pdev); unsigned long flags; @@ -2018,7 +2018,7 @@ static int at91udc_resume(struct platform_device *pdev) #endif static struct platform_driver at91_udc_driver = { - .remove = __exit_p(at91udc_remove), + .remove = at91udc_remove, .shutdown = at91udc_shutdown, .suspend = at91udc_suspend, .resume = at91udc_resume, diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index d79cb35dbf8a..4095cce05e6a 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -152,7 +152,7 @@ static int regs_dbg_open(struct inode *inode, struct file *file) spin_lock_irq(&udc->lock); for (i = 0; i < inode->i_size / 4; i++) - data[i] = __raw_readl(udc->regs + i * 4); + data[i] = usba_io_readl(udc->regs + i * 4); spin_unlock_irq(&udc->lock); file->private_data = data; @@ -704,8 +704,8 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, unsigned long flags; int ret; - DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n", - ep->ep.name, req->req.length, req->req.dma, + DBG(DBG_DMA, "%s: req l/%u d/%pad %c%c%c\n", + ep->ep.name, req->req.length, &req->req.dma, req->req.zero ? 'Z' : 'z', req->req.short_not_ok ? 'S' : 's', req->req.no_interrupt ? 'I' : 'i'); @@ -1249,7 +1249,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, if (crq->wLength != cpu_to_le16(sizeof(status))) goto stall; ep->state = DATA_STAGE_IN; - __raw_writew(status, ep->fifo); + usba_io_writew(status, ep->fifo); usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); break; } @@ -1739,7 +1739,72 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) return IRQ_HANDLED; } -static irqreturn_t usba_vbus_irq(int irq, void *devid) +static int start_clock(struct usba_udc *udc) +{ + int ret; + + if (udc->clocked) + return 0; + + ret = clk_prepare_enable(udc->pclk); + if (ret) + return ret; + ret = clk_prepare_enable(udc->hclk); + if (ret) { + clk_disable_unprepare(udc->pclk); + return ret; + } + + udc->clocked = true; + return 0; +} + +static void stop_clock(struct usba_udc *udc) +{ + if (!udc->clocked) + return; + + clk_disable_unprepare(udc->hclk); + clk_disable_unprepare(udc->pclk); + + udc->clocked = false; +} + +static int usba_start(struct usba_udc *udc) +{ + unsigned long flags; + int ret; + + ret = start_clock(udc); + if (ret) + return ret; + + spin_lock_irqsave(&udc->lock, flags); + toggle_bias(udc, 1); + usba_writel(udc, CTRL, USBA_ENABLE_MASK); + usba_int_enb_set(udc, USBA_END_OF_RESET); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static void usba_stop(struct usba_udc *udc) +{ + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + reset_all_endpoints(udc); + + /* This will also disable the DP pullup */ + toggle_bias(udc, 0); + usba_writel(udc, CTRL, USBA_DISABLE_MASK); + spin_unlock_irqrestore(&udc->lock, flags); + + stop_clock(udc); +} + +static irqreturn_t usba_vbus_irq_thread(int irq, void *devid) { struct usba_udc *udc = devid; int vbus; @@ -1747,35 +1812,22 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid) /* debounce */ udelay(10); - spin_lock(&udc->lock); - - /* May happen if Vbus pin toggles during probe() */ - if (!udc->driver) - goto out; + mutex_lock(&udc->vbus_mutex); vbus = vbus_is_present(udc); if (vbus != udc->vbus_prev) { if (vbus) { - toggle_bias(udc, 1); - usba_writel(udc, CTRL, USBA_ENABLE_MASK); - usba_int_enb_set(udc, USBA_END_OF_RESET); + usba_start(udc); } else { - udc->gadget.speed = USB_SPEED_UNKNOWN; - reset_all_endpoints(udc); - toggle_bias(udc, 0); - usba_writel(udc, CTRL, USBA_DISABLE_MASK); - if (udc->driver->disconnect) { - spin_unlock(&udc->lock); + usba_stop(udc); + + if (udc->driver->disconnect) udc->driver->disconnect(&udc->gadget); - spin_lock(&udc->lock); - } } udc->vbus_prev = vbus; } -out: - spin_unlock(&udc->lock); - + mutex_unlock(&udc->vbus_mutex); return IRQ_HANDLED; } @@ -1787,55 +1839,47 @@ static int atmel_usba_start(struct usb_gadget *gadget, unsigned long flags; spin_lock_irqsave(&udc->lock, flags); - udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; udc->driver = driver; spin_unlock_irqrestore(&udc->lock, flags); - ret = clk_prepare_enable(udc->pclk); - if (ret) - return ret; - ret = clk_prepare_enable(udc->hclk); - if (ret) { - clk_disable_unprepare(udc->pclk); - return ret; - } + mutex_lock(&udc->vbus_mutex); - udc->vbus_prev = 0; if (gpio_is_valid(udc->vbus_pin)) enable_irq(gpio_to_irq(udc->vbus_pin)); /* If Vbus is present, enable the controller and wait for reset */ - spin_lock_irqsave(&udc->lock, flags); - if (vbus_is_present(udc) && udc->vbus_prev == 0) { - toggle_bias(udc, 1); - usba_writel(udc, CTRL, USBA_ENABLE_MASK); - usba_int_enb_set(udc, USBA_END_OF_RESET); + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) { + ret = usba_start(udc); + if (ret) + goto err; } - spin_unlock_irqrestore(&udc->lock, flags); + mutex_unlock(&udc->vbus_mutex); return 0; + +err: + if (gpio_is_valid(udc->vbus_pin)) + disable_irq(gpio_to_irq(udc->vbus_pin)); + + mutex_unlock(&udc->vbus_mutex); + + spin_lock_irqsave(&udc->lock, flags); + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + udc->driver = NULL; + spin_unlock_irqrestore(&udc->lock, flags); + return ret; } static int atmel_usba_stop(struct usb_gadget *gadget) { struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); - unsigned long flags; if (gpio_is_valid(udc->vbus_pin)) disable_irq(gpio_to_irq(udc->vbus_pin)); - spin_lock_irqsave(&udc->lock, flags); - udc->gadget.speed = USB_SPEED_UNKNOWN; - reset_all_endpoints(udc); - spin_unlock_irqrestore(&udc->lock, flags); - - /* This will also disable the DP pullup */ - toggle_bias(udc, 0); - usba_writel(udc, CTRL, USBA_DISABLE_MASK); - - clk_disable_unprepare(udc->hclk); - clk_disable_unprepare(udc->pclk); + usba_stop(udc); udc->driver = NULL; @@ -2057,6 +2101,7 @@ static int usba_udc_probe(struct platform_device *pdev) return PTR_ERR(hclk); spin_lock_init(&udc->lock); + mutex_init(&udc->vbus_mutex); udc->pdev = pdev; udc->pclk = pclk; udc->hclk = hclk; @@ -2111,17 +2156,17 @@ static int usba_udc_probe(struct platform_device *pdev) if (gpio_is_valid(udc->vbus_pin)) { if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) { - ret = devm_request_irq(&pdev->dev, - gpio_to_irq(udc->vbus_pin), - usba_vbus_irq, 0, + irq_set_status_flags(gpio_to_irq(udc->vbus_pin), + IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(&pdev->dev, + gpio_to_irq(udc->vbus_pin), NULL, + usba_vbus_irq_thread, IRQF_ONESHOT, "atmel_usba_udc", udc); if (ret) { udc->vbus_pin = -ENODEV; dev_warn(&udc->pdev->dev, "failed to request vbus irq; " "assuming always on\n"); - } else { - disable_irq(gpio_to_irq(udc->vbus_pin)); } } else { /* gpio_request fail so use -EINVAL for gpio_is_valid */ @@ -2132,6 +2177,7 @@ static int usba_udc_probe(struct platform_device *pdev) ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (ret) return ret; + device_init_wakeup(&pdev->dev, 1); usba_init_debugfs(udc); for (i = 1; i < udc->num_ep; i++) @@ -2140,13 +2186,14 @@ static int usba_udc_probe(struct platform_device *pdev) return 0; } -static int __exit usba_udc_remove(struct platform_device *pdev) +static int usba_udc_remove(struct platform_device *pdev) { struct usba_udc *udc; int i; udc = platform_get_drvdata(pdev); + device_init_wakeup(&pdev->dev, 0); usb_del_gadget_udc(&udc->gadget); for (i = 1; i < udc->num_ep; i++) @@ -2156,10 +2203,65 @@ static int __exit usba_udc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int usba_udc_suspend(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + mutex_lock(&udc->vbus_mutex); + + if (!device_may_wakeup(dev)) { + usba_stop(udc); + goto out; + } + + /* + * Device may wake up. We stay clocked if we failed + * to request vbus irq, assuming always on. + */ + if (gpio_is_valid(udc->vbus_pin)) { + usba_stop(udc); + enable_irq_wake(gpio_to_irq(udc->vbus_pin)); + } + +out: + mutex_unlock(&udc->vbus_mutex); + return 0; +} + +static int usba_udc_resume(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + if (device_may_wakeup(dev) && gpio_is_valid(udc->vbus_pin)) + disable_irq_wake(gpio_to_irq(udc->vbus_pin)); + + /* If Vbus is present, enable the controller and wait for reset */ + mutex_lock(&udc->vbus_mutex); + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) + usba_start(udc); + mutex_unlock(&udc->vbus_mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume); + static struct platform_driver udc_driver = { - .remove = __exit_p(usba_udc_remove), + .remove = usba_udc_remove, .driver = { .name = "atmel_usba_udc", + .pm = &usba_udc_pm_ops, .of_match_table = of_match_ptr(atmel_udc_dt_ids), }, }; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 497cd18836f3..ea448a344767 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -191,18 +191,28 @@ | USBA_BF(name, value)) /* Register access macros */ +#ifdef CONFIG_AVR32 +#define usba_io_readl __raw_readl +#define usba_io_writel __raw_writel +#define usba_io_writew __raw_writew +#else +#define usba_io_readl readl_relaxed +#define usba_io_writel writel_relaxed +#define usba_io_writew writew_relaxed +#endif + #define usba_readl(udc, reg) \ - __raw_readl((udc)->regs + USBA_##reg) + usba_io_readl((udc)->regs + USBA_##reg) #define usba_writel(udc, reg, value) \ - __raw_writel((value), (udc)->regs + USBA_##reg) + usba_io_writel((value), (udc)->regs + USBA_##reg) #define usba_ep_readl(ep, reg) \ - __raw_readl((ep)->ep_regs + USBA_EPT_##reg) + usba_io_readl((ep)->ep_regs + USBA_EPT_##reg) #define usba_ep_writel(ep, reg, value) \ - __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg) + usba_io_writel((value), (ep)->ep_regs + USBA_EPT_##reg) #define usba_dma_readl(ep, reg) \ - __raw_readl((ep)->dma_regs + USBA_DMA_##reg) + usba_io_readl((ep)->dma_regs + USBA_DMA_##reg) #define usba_dma_writel(ep, reg, value) \ - __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg) + usba_io_writel((value), (ep)->dma_regs + USBA_DMA_##reg) /* Calculate base address for a given endpoint or DMA controller */ #define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) @@ -313,6 +323,9 @@ struct usba_udc { /* Protect hw registers from concurrent modifications */ spinlock_t lock; + /* Mutex to prevent concurrent start or stop */ + struct mutex vbus_mutex; + void __iomem *regs; void __iomem *fifo; @@ -328,6 +341,7 @@ struct usba_udc { struct clk *hclk; struct usba_ep *usba_ep; bool bias_pulse_needed; + bool clocked; u16 devstatus; diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c index b04980cf6dc4..1efa61265d8d 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_ep.c +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c @@ -779,7 +779,7 @@ static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req) /* The current hw dequeue pointer */ tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(0)); deq_ptr_64 = tmp_32; - tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(1)); + tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS1(0)); deq_ptr_64 |= ((u64)tmp_32 << 32); /* we have the dma addr of next bd that will be fetched by hardware */ diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 8dda48445f6f..181112c88f43 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -1923,7 +1923,7 @@ static inline void ss_hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof *desc); - desc->bDescriptorType = 0x2a; + desc->bDescriptorType = USB_DT_SS_HUB; desc->bDescLength = 12; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | @@ -1936,7 +1936,7 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc) static inline void hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof *desc); - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | @@ -2631,7 +2631,7 @@ static int __init init(void) return -EINVAL; if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) { - pr_err("Number of emulated UDC must be in range of 1…%d\n", + pr_err("Number of emulated UDC must be in range of 1...%d\n", MAX_NUM_UDC); return -EINVAL; } diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c index e547ea7f56b1..1137e3384218 100644 --- a/drivers/usb/gadget/udc/fotg210-udc.c +++ b/drivers/usb/gadget/udc/fotg210-udc.c @@ -1171,7 +1171,7 @@ static int fotg210_udc_probe(struct platform_device *pdev) udc_name, fotg210); if (ret < 0) { pr_err("request_irq error (%d)\n", ret); - goto err_irq; + goto err_req; } ret = usb_add_gadget_udc(&pdev->dev, &fotg210->gadget); @@ -1183,7 +1183,6 @@ static int fotg210_udc_probe(struct platform_device *pdev) return 0; err_add_udc: -err_irq: free_irq(ires->start, fotg210); err_req: diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index 55fcb930f92e..c60022b46a48 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -2525,7 +2525,7 @@ err_kfree: /* Driver removal function * Free resources and finish pending transactions */ -static int __exit fsl_udc_remove(struct platform_device *pdev) +static int fsl_udc_remove(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -2663,7 +2663,7 @@ static const struct platform_device_id fsl_udc_devtype[] = { }; MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { - .remove = __exit_p(fsl_udc_remove), + .remove = fsl_udc_remove, /* Just for FSL i.mx SoC currently */ .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c index fb4df159d32d..3970f453de49 100644 --- a/drivers/usb/gadget/udc/fusb300_udc.c +++ b/drivers/usb/gadget/udc/fusb300_udc.c @@ -1342,7 +1342,7 @@ static const struct usb_gadget_ops fusb300_gadget_ops = { .udc_stop = fusb300_udc_stop, }; -static int __exit fusb300_remove(struct platform_device *pdev) +static int fusb300_remove(struct platform_device *pdev) { struct fusb300 *fusb300 = platform_get_drvdata(pdev); @@ -1492,7 +1492,7 @@ clean_up: } static struct platform_driver fusb300_driver = { - .remove = __exit_p(fusb300_remove), + .remove = fusb300_remove, .driver = { .name = (char *) udc_name, }, diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c index 5b9176e7202a..9e8d842e8c08 100644 --- a/drivers/usb/gadget/udc/goku_udc.c +++ b/drivers/usb/gadget/udc/goku_udc.c @@ -1024,35 +1024,79 @@ static const char proc_node_name [] = "driver/udc"; static void dump_intmask(struct seq_file *m, const char *label, u32 mask) { /* int_status is the same format ... */ - seq_printf(m, - "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n", - label, mask, - (mask & INT_PWRDETECT) ? " power" : "", - (mask & INT_SYSERROR) ? " sys" : "", - (mask & INT_MSTRDEND) ? " in-dma" : "", - (mask & INT_MSTWRTMOUT) ? " wrtmo" : "", - - (mask & INT_MSTWREND) ? " out-dma" : "", - (mask & INT_MSTWRSET) ? " wrset" : "", - (mask & INT_ERR) ? " err" : "", - (mask & INT_SOF) ? " sof" : "", - - (mask & INT_EP3NAK) ? " ep3nak" : "", - (mask & INT_EP2NAK) ? " ep2nak" : "", - (mask & INT_EP1NAK) ? " ep1nak" : "", - (mask & INT_EP3DATASET) ? " ep3" : "", - - (mask & INT_EP2DATASET) ? " ep2" : "", - (mask & INT_EP1DATASET) ? " ep1" : "", - (mask & INT_STATUSNAK) ? " ep0snak" : "", - (mask & INT_STATUS) ? " ep0status" : "", - - (mask & INT_SETUP) ? " setup" : "", - (mask & INT_ENDPOINT0) ? " ep0" : "", - (mask & INT_USBRESET) ? " reset" : "", - (mask & INT_SUSPEND) ? " suspend" : ""); + seq_printf(m, "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n", + label, mask, + (mask & INT_PWRDETECT) ? " power" : "", + (mask & INT_SYSERROR) ? " sys" : "", + (mask & INT_MSTRDEND) ? " in-dma" : "", + (mask & INT_MSTWRTMOUT) ? " wrtmo" : "", + + (mask & INT_MSTWREND) ? " out-dma" : "", + (mask & INT_MSTWRSET) ? " wrset" : "", + (mask & INT_ERR) ? " err" : "", + (mask & INT_SOF) ? " sof" : "", + + (mask & INT_EP3NAK) ? " ep3nak" : "", + (mask & INT_EP2NAK) ? " ep2nak" : "", + (mask & INT_EP1NAK) ? " ep1nak" : "", + (mask & INT_EP3DATASET) ? " ep3" : "", + + (mask & INT_EP2DATASET) ? " ep2" : "", + (mask & INT_EP1DATASET) ? " ep1" : "", + (mask & INT_STATUSNAK) ? " ep0snak" : "", + (mask & INT_STATUS) ? " ep0status" : "", + + (mask & INT_SETUP) ? " setup" : "", + (mask & INT_ENDPOINT0) ? " ep0" : "", + (mask & INT_USBRESET) ? " reset" : "", + (mask & INT_SUSPEND) ? " suspend" : ""); +} + +static const char *udc_ep_state(enum ep0state state) +{ + switch (state) { + case EP0_DISCONNECT: + return "ep0_disconnect"; + case EP0_IDLE: + return "ep0_idle"; + case EP0_IN: + return "ep0_in"; + case EP0_OUT: + return "ep0_out"; + case EP0_STATUS: + return "ep0_status"; + case EP0_STALL: + return "ep0_stall"; + case EP0_SUSPEND: + return "ep0_suspend"; + } + + return "ep0_?"; } +static const char *udc_ep_status(u32 status) +{ + switch (status & EPxSTATUS_EP_MASK) { + case EPxSTATUS_EP_READY: + return "ready"; + case EPxSTATUS_EP_DATAIN: + return "packet"; + case EPxSTATUS_EP_FULL: + return "full"; + case EPxSTATUS_EP_TX_ERR: /* host will retry */ + return "tx_err"; + case EPxSTATUS_EP_RX_ERR: + return "rx_err"; + case EPxSTATUS_EP_BUSY: /* ep0 only */ + return "busy"; + case EPxSTATUS_EP_STALL: + return "stall"; + case EPxSTATUS_EP_INVALID: /* these "can't happen" */ + return "invalid"; + } + + return "?"; +} static int udc_proc_read(struct seq_file *m, void *v) { @@ -1068,29 +1112,18 @@ static int udc_proc_read(struct seq_file *m, void *v) tmp = readl(®s->power_detect); is_usb_connected = tmp & PW_DETECT; seq_printf(m, - "%s - %s\n" - "%s version: %s %s\n" - "Gadget driver: %s\n" - "Host %s, %s\n" - "\n", - pci_name(dev->pdev), driver_desc, - driver_name, DRIVER_VERSION, dmastr(), - dev->driver ? dev->driver->driver.name : "(none)", - is_usb_connected - ? ((tmp & PW_PULLUP) ? "full speed" : "powered") - : "disconnected", - ({const char *state; - switch(dev->ep0state){ - case EP0_DISCONNECT: state = "ep0_disconnect"; break; - case EP0_IDLE: state = "ep0_idle"; break; - case EP0_IN: state = "ep0_in"; break; - case EP0_OUT: state = "ep0_out"; break; - case EP0_STATUS: state = "ep0_status"; break; - case EP0_STALL: state = "ep0_stall"; break; - case EP0_SUSPEND: state = "ep0_suspend"; break; - default: state = "ep0_?"; break; - } state; }) - ); + "%s - %s\n" + "%s version: %s %s\n" + "Gadget driver: %s\n" + "Host %s, %s\n" + "\n", + pci_name(dev->pdev), driver_desc, + driver_name, DRIVER_VERSION, dmastr(), + dev->driver ? dev->driver->driver.name : "(none)", + is_usb_connected + ? ((tmp & PW_PULLUP) ? "full speed" : "powered") + : "disconnected", + udc_ep_state(dev->ep0state)); dump_intmask(m, "int_status", readl(®s->int_status)); dump_intmask(m, "int_enable", readl(®s->int_enable)); @@ -1099,31 +1132,30 @@ static int udc_proc_read(struct seq_file *m, void *v) goto done; /* registers for (active) device and ep0 */ - if (seq_printf(m, "\nirqs %lu\ndataset %02x " - "single.bcs %02x.%02x state %x addr %u\n", - dev->irqs, readl(®s->DataSet), - readl(®s->EPxSingle), readl(®s->EPxBCS), - readl(®s->UsbState), - readl(®s->address)) < 0) + seq_printf(m, "\nirqs %lu\ndataset %02x single.bcs %02x.%02x state %x addr %u\n", + dev->irqs, readl(®s->DataSet), + readl(®s->EPxSingle), readl(®s->EPxBCS), + readl(®s->UsbState), + readl(®s->address)); + if (seq_has_overflowed(m)) goto done; tmp = readl(®s->dma_master); - if (seq_printf(m, - "dma %03X =" EIGHTBITS "%s %s\n", tmp, - (tmp & MST_EOPB_DIS) ? " eopb-" : "", - (tmp & MST_EOPB_ENA) ? " eopb+" : "", - (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "", - (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "", - - (tmp & MST_RD_EOPB) ? " eopb" : "", - (tmp & MST_RD_RESET) ? " in_reset" : "", - (tmp & MST_WR_RESET) ? " out_reset" : "", - (tmp & MST_RD_ENA) ? " IN" : "", - - (tmp & MST_WR_ENA) ? " OUT" : "", - (tmp & MST_CONNECTION) - ? "ep1in/ep2out" - : "ep1out/ep2in") < 0) + seq_printf(m, "dma %03X =" EIGHTBITS "%s %s\n", + tmp, + (tmp & MST_EOPB_DIS) ? " eopb-" : "", + (tmp & MST_EOPB_ENA) ? " eopb+" : "", + (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "", + (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "", + + (tmp & MST_RD_EOPB) ? " eopb" : "", + (tmp & MST_RD_RESET) ? " in_reset" : "", + (tmp & MST_WR_RESET) ? " out_reset" : "", + (tmp & MST_RD_ENA) ? " IN" : "", + + (tmp & MST_WR_ENA) ? " OUT" : "", + (tmp & MST_CONNECTION) ? "ep1in/ep2out" : "ep1out/ep2in"); + if (seq_has_overflowed(m)) goto done; /* dump endpoint queues */ @@ -1135,44 +1167,23 @@ static int udc_proc_read(struct seq_file *m, void *v) continue; tmp = readl(ep->reg_status); - if (seq_printf(m, - "%s %s max %u %s, irqs %lu, " - "status %02x (%s) " FOURBITS "\n", - ep->ep.name, - ep->is_in ? "in" : "out", - ep->ep.maxpacket, - ep->dma ? "dma" : "pio", - ep->irqs, - tmp, ({ char *s; - switch (tmp & EPxSTATUS_EP_MASK) { - case EPxSTATUS_EP_READY: - s = "ready"; break; - case EPxSTATUS_EP_DATAIN: - s = "packet"; break; - case EPxSTATUS_EP_FULL: - s = "full"; break; - case EPxSTATUS_EP_TX_ERR: // host will retry - s = "tx_err"; break; - case EPxSTATUS_EP_RX_ERR: - s = "rx_err"; break; - case EPxSTATUS_EP_BUSY: /* ep0 only */ - s = "busy"; break; - case EPxSTATUS_EP_STALL: - s = "stall"; break; - case EPxSTATUS_EP_INVALID: // these "can't happen" - s = "invalid"; break; - default: - s = "?"; break; - } s; }), - (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", - (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", - (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", - (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "" - ) < 0) + seq_printf(m, "%s %s max %u %s, irqs %lu, status %02x (%s) " FOURBITS "\n", + ep->ep.name, + ep->is_in ? "in" : "out", + ep->ep.maxpacket, + ep->dma ? "dma" : "pio", + ep->irqs, + tmp, udc_ep_status(tmp), + (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", + (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", + (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", + (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""); + if (seq_has_overflowed(m)) goto done; if (list_empty(&ep->queue)) { - if (seq_puts(m, "\t(nothing queued)\n") < 0) + seq_puts(m, "\t(nothing queued)\n"); + if (seq_has_overflowed(m)) goto done; continue; } @@ -1187,10 +1198,10 @@ static int udc_proc_read(struct seq_file *m, void *v) } else tmp = req->req.actual; - if (seq_printf(m, - "\treq %p len %u/%u buf %p\n", - &req->req, tmp, req->req.length, - req->req.buf) < 0) + seq_printf(m, "\treq %p len %u/%u buf %p\n", + &req->req, tmp, req->req.length, + req->req.buf); + if (seq_has_overflowed(m)) goto done; } } diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 27fd41333f71..3b6a7852822d 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -1803,23 +1803,14 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep, req = container_of(_req, struct lpc32xx_request, req); ep = container_of(_ep, struct lpc32xx_ep, ep); - if (!_req || !_req->complete || !_req->buf || + if (!_ep || !_req || !_req->complete || !_req->buf || !list_empty(&req->queue)) return -EINVAL; udc = ep->udc; - if (!_ep) { - dev_dbg(udc->dev, "invalid ep\n"); - return -EINVAL; - } - - - if ((!udc) || (!udc->driver) || - (udc->gadget.speed == USB_SPEED_UNKNOWN)) { - dev_dbg(udc->dev, "invalid device\n"); - return -EINVAL; - } + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + return -EPIPE; if (ep->lep) { struct lpc32xx_usbd_dd_gad *dd; diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c index 8c7c83c93713..309706fe4bf0 100644 --- a/drivers/usb/gadget/udc/m66592-udc.c +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -1528,7 +1528,7 @@ static const struct usb_gadget_ops m66592_gadget_ops = { .pullup = m66592_pullup, }; -static int __exit m66592_remove(struct platform_device *pdev) +static int m66592_remove(struct platform_device *pdev) { struct m66592 *m66592 = platform_get_drvdata(pdev); @@ -1695,7 +1695,7 @@ clean_up: /*-------------------------------------------------------------------------*/ static struct platform_driver m66592_driver = { - .remove = __exit_p(m66592_remove), + .remove = m66592_remove, .driver = { .name = (char *) udc_name, }, diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c index d32160d6463f..5da37c957b53 100644 --- a/drivers/usb/gadget/udc/mv_udc_core.c +++ b/drivers/usb/gadget/udc/mv_udc_core.c @@ -2167,7 +2167,7 @@ static int mv_udc_probe(struct platform_device *pdev) return -ENODEV; } - udc->phy_regs = ioremap(r->start, resource_size(r)); + udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (udc->phy_regs == NULL) { dev_err(&pdev->dev, "failed to map phy I/O memory\n"); return -EBUSY; diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index d2c0bf65e345..2bee912ca65b 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -80,6 +80,13 @@ static const char *const ep_name[] = { "ep-e", "ep-f", "ep-g", "ep-h", }; +/* Endpoint names for usb3380 advance mode */ +static const char *const ep_name_adv[] = { + ep0name, + "ep1in", "ep2out", "ep3in", "ep4out", + "ep1out", "ep2in", "ep3out", "ep4in", +}; + /* mode 0 == ep-{a,b,c,d} 1K fifo each * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable @@ -116,6 +123,11 @@ static char *type_string(u8 bmAttributes) #define valid_bit cpu_to_le32(BIT(VALID_BIT)) #define dma_done_ie cpu_to_le32(BIT(DMA_DONE_INTERRUPT_ENABLE)) +static void ep_clear_seqnum(struct net2280_ep *ep); +static void stop_activity(struct net2280 *dev, + struct usb_gadget_driver *driver); +static void ep0_start(struct net2280 *dev); + /*-------------------------------------------------------------------------*/ static inline void enable_pciirqenb(struct net2280_ep *ep) { @@ -135,34 +147,49 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct net2280 *dev; struct net2280_ep *ep; - u32 max, tmp; + u32 max; + u32 tmp = 0; + u32 type; unsigned long flags; static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 }; + int ret = 0; ep = container_of(_ep, struct net2280_ep, ep); if (!_ep || !desc || ep->desc || _ep->name == ep0name || - desc->bDescriptorType != USB_DT_ENDPOINT) + desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_err("%s: failed at line=%d\n", __func__, __LINE__); return -EINVAL; + } dev = ep->dev; - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + ret = -ESHUTDOWN; + goto print_err; + } /* erratum 0119 workaround ties up an endpoint number */ - if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) - return -EDOM; + if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) { + ret = -EDOM; + goto print_err; + } if (dev->quirks & PLX_SUPERSPEED) { - if ((desc->bEndpointAddress & 0x0f) >= 0x0c) - return -EDOM; + if ((desc->bEndpointAddress & 0x0f) >= 0x0c) { + ret = -EDOM; + goto print_err; + } ep->is_in = !!usb_endpoint_dir_in(desc); - if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) - return -EINVAL; + if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) { + ret = -EINVAL; + goto print_err; + } } /* sanity check ep-e/ep-f since their fifos are small */ max = usb_endpoint_maxp(desc) & 0x1fff; - if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) - return -ERANGE; + if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) { + ret = -ERANGE; + goto print_err; + } spin_lock_irqsave(&dev->lock, flags); _ep->maxpacket = max & 0x7ff; @@ -178,27 +205,42 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) /* set type, direction, address; reset fifo counters */ writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat); - tmp = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); - if (tmp == USB_ENDPOINT_XFER_INT) { + + if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) { + tmp = readl(&ep->cfg->ep_cfg); + /* If USB ep number doesn't match hardware ep number */ + if ((tmp & 0xf) != usb_endpoint_num(desc)) { + ret = -EINVAL; + spin_unlock_irqrestore(&dev->lock, flags); + goto print_err; + } + if (ep->is_in) + tmp &= ~USB3380_EP_CFG_MASK_IN; + else + tmp &= ~USB3380_EP_CFG_MASK_OUT; + } + type = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + if (type == USB_ENDPOINT_XFER_INT) { /* erratum 0105 workaround prevents hs NYET */ if (dev->chiprev == 0100 && dev->gadget.speed == USB_SPEED_HIGH && !(desc->bEndpointAddress & USB_DIR_IN)) writel(BIT(CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); - } else if (tmp == USB_ENDPOINT_XFER_BULK) { + } else if (type == USB_ENDPOINT_XFER_BULK) { /* catch some particularly blatant driver bugs */ if ((dev->gadget.speed == USB_SPEED_SUPER && max != 1024) || (dev->gadget.speed == USB_SPEED_HIGH && max != 512) || (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { spin_unlock_irqrestore(&dev->lock, flags); - return -ERANGE; + ret = -ERANGE; + goto print_err; } } - ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC); + ep->is_iso = (type == USB_ENDPOINT_XFER_ISOC); /* Enable this endpoint */ if (dev->quirks & PLX_LEGACY) { - tmp <<= ENDPOINT_TYPE; + tmp |= type << ENDPOINT_TYPE; tmp |= desc->bEndpointAddress; /* default full fifo lines */ tmp |= (4 << ENDPOINT_BYTE_COUNT); @@ -207,17 +249,17 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) } else { /* In Legacy mode, only OUT endpoints are used */ if (dev->enhanced_mode && ep->is_in) { - tmp <<= IN_ENDPOINT_TYPE; + tmp |= type << IN_ENDPOINT_TYPE; tmp |= BIT(IN_ENDPOINT_ENABLE); - /* Not applicable to Legacy */ - tmp |= BIT(ENDPOINT_DIRECTION); } else { - tmp <<= OUT_ENDPOINT_TYPE; + tmp |= type << OUT_ENDPOINT_TYPE; tmp |= BIT(OUT_ENDPOINT_ENABLE); tmp |= (ep->is_in << ENDPOINT_DIRECTION); } - tmp |= usb_endpoint_num(desc); + tmp |= (4 << ENDPOINT_BYTE_COUNT); + if (!dev->enhanced_mode) + tmp |= usb_endpoint_num(desc); tmp |= (ep->ep.maxburst << MAX_BURST_SIZE); } @@ -235,6 +277,8 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) BIT(CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); } + if (dev->quirks & PLX_SUPERSPEED) + ep_clear_seqnum(ep); writel(tmp, &ep->cfg->ep_cfg); /* enable irqs */ @@ -271,7 +315,11 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) /* pci writes may still be posted */ spin_unlock_irqrestore(&dev->lock, flags); - return 0; + return ret; + +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret); + return ret; } static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec) @@ -416,6 +464,13 @@ static void ep_reset_338x(struct net2280_regs __iomem *regs, BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) | BIT(DATA_OUT_PING_TOKEN_INTERRUPT) | BIT(DATA_IN_TOKEN_INTERRUPT), &ep->regs->ep_stat); + + tmp = readl(&ep->cfg->ep_cfg); + if (ep->is_in) + tmp &= ~USB3380_EP_CFG_MASK_IN; + else + tmp &= ~USB3380_EP_CFG_MASK_OUT; + writel(tmp, &ep->cfg->ep_cfg); } static void nuke(struct net2280_ep *); @@ -426,9 +481,10 @@ static int net2280_disable(struct usb_ep *_ep) unsigned long flags; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || !ep->desc || _ep->name == ep0name) + if (!_ep || !ep->desc || _ep->name == ep0name) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -EINVAL; - + } spin_lock_irqsave(&ep->dev->lock, flags); nuke(ep); @@ -458,8 +514,10 @@ static struct usb_request struct net2280_ep *ep; struct net2280_request *req; - if (!_ep) + if (!_ep) { + pr_err("%s: Invalid ep\n", __func__); return NULL; + } ep = container_of(_ep, struct net2280_ep, ep); req = kzalloc(sizeof(*req), gfp_flags); @@ -491,8 +549,11 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req) struct net2280_request *req; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || !_req) + if (!_ep || !_req) { + dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n", + __func__, _ep, _req); return; + } req = container_of(_req, struct net2280_request, req); WARN_ON(!list_empty(&req->queue)); @@ -896,35 +957,44 @@ net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) struct net2280_ep *ep; struct net2280 *dev; unsigned long flags; + int ret = 0; /* we always require a cpu-view buffer, so that we can * always use pio (as fallback or whatever). */ - req = container_of(_req, struct net2280_request, req); - if (!_req || !_req->complete || !_req->buf || - !list_empty(&req->queue)) - return -EINVAL; - if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) - return -EDOM; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -EINVAL; + } + req = container_of(_req, struct net2280_request, req); + if (!_req || !_req->complete || !_req->buf || + !list_empty(&req->queue)) { + ret = -EINVAL; + goto print_err; + } + if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) { + ret = -EDOM; + goto print_err; + } dev = ep->dev; - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + ret = -ESHUTDOWN; + goto print_err; + } /* FIXME implement PIO fallback for ZLPs with DMA */ - if (ep->dma && _req->length == 0) - return -EOPNOTSUPP; + if (ep->dma && _req->length == 0) { + ret = -EOPNOTSUPP; + goto print_err; + } /* set up dma mapping in case the caller didn't */ if (ep->dma) { - int ret; - ret = usb_gadget_map_request(&dev->gadget, _req, ep->is_in); if (ret) - return ret; + goto print_err; } ep_vdbg(dev, "%s queue req %p, len %d buf %p\n", @@ -1013,7 +1083,11 @@ done: spin_unlock_irqrestore(&dev->lock, flags); /* pci writes may still be posted */ - return 0; + return ret; + +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret); + return ret; } static inline void @@ -1134,8 +1208,11 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req) int stopped; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0) || !_req) + if (!_ep || (!ep->desc && ep->num != 0) || !_req) { + pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n", + __func__, _ep, _req); return -EINVAL; + } spin_lock_irqsave(&ep->dev->lock, flags); stopped = ep->stopped; @@ -1157,6 +1234,8 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req) } if (&req->req != _req) { spin_unlock_irqrestore(&ep->dev->lock, flags); + dev_err(&ep->dev->pdev->dev, "%s: Request mismatch\n", + __func__); return -EINVAL; } @@ -1214,20 +1293,28 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) int retval = 0; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -EINVAL; - if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + retval = -ESHUTDOWN; + goto print_err; + } if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03) - == USB_ENDPOINT_XFER_ISOC) - return -EINVAL; + == USB_ENDPOINT_XFER_ISOC) { + retval = -EINVAL; + goto print_err; + } spin_lock_irqsave(&ep->dev->lock, flags); - if (!list_empty(&ep->queue)) + if (!list_empty(&ep->queue)) { retval = -EAGAIN; - else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) + goto print_unlock; + } else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) { retval = -EAGAIN; - else { + goto print_unlock; + } else { ep_vdbg(ep->dev, "%s %s %s\n", _ep->name, value ? "set" : "clear", wedged ? "wedge" : "halt"); @@ -1251,6 +1338,12 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) spin_unlock_irqrestore(&ep->dev->lock, flags); return retval; + +print_unlock: + spin_unlock_irqrestore(&ep->dev->lock, flags); +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, retval); + return retval; } static int net2280_set_halt(struct usb_ep *_ep, int value) @@ -1260,8 +1353,10 @@ static int net2280_set_halt(struct usb_ep *_ep, int value) static int net2280_set_wedge(struct usb_ep *_ep) { - if (!_ep || _ep->name == ep0name) + if (!_ep || _ep->name == ep0name) { + pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep); return -EINVAL; + } return net2280_set_halt_and_wedge(_ep, 1, 1); } @@ -1271,14 +1366,22 @@ static int net2280_fifo_status(struct usb_ep *_ep) u32 avail; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return -ENODEV; - if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(&ep->dev->pdev->dev, + "%s: Invalid driver=%p or speed=%d\n", + __func__, ep->dev->driver, ep->dev->gadget.speed); return -ESHUTDOWN; + } avail = readl(&ep->regs->ep_avail) & (BIT(12) - 1); - if (avail > ep->fifo_size) + if (avail > ep->fifo_size) { + dev_err(&ep->dev->pdev->dev, "%s: Fifo overflow\n", __func__); return -EOVERFLOW; + } if (ep->is_in) avail = ep->fifo_size - avail; return avail; @@ -1289,10 +1392,16 @@ static void net2280_fifo_flush(struct usb_ep *_ep) struct net2280_ep *ep; ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep || (!ep->desc && ep->num != 0)) + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); return; - if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(&ep->dev->pdev->dev, + "%s: Invalid driver=%p or speed=%d\n", + __func__, ep->dev->driver, ep->dev->gadget.speed); return; + } writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat); (void) readl(&ep->regs->ep_rsp); @@ -1389,11 +1498,14 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on) spin_lock_irqsave(&dev->lock, flags); tmp = readl(&dev->usb->usbctl); dev->softconnect = (is_on != 0); - if (is_on) - tmp |= BIT(USB_DETECT_ENABLE); - else - tmp &= ~BIT(USB_DETECT_ENABLE); - writel(tmp, &dev->usb->usbctl); + if (is_on) { + ep0_start(dev); + writel(tmp | BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); + } else { + writel(tmp & ~BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); + stop_activity(dev, dev->driver); + } + spin_unlock_irqrestore(&dev->lock, flags); return 0; @@ -1781,8 +1893,8 @@ static void defect7374_enable_data_eps_zero(struct net2280 *dev) tmp = ((0 << ENDPOINT_NUMBER) | BIT(ENDPOINT_DIRECTION) | (2 << OUT_ENDPOINT_TYPE) | (2 << IN_ENDPOINT_TYPE) | ((dev->enhanced_mode) ? - BIT(OUT_ENDPOINT_ENABLE) : BIT(ENDPOINT_ENABLE)) | - BIT(IN_ENDPOINT_ENABLE)); + BIT(OUT_ENDPOINT_ENABLE) | BIT(IN_ENDPOINT_ENABLE) : + BIT(ENDPOINT_ENABLE))); for (i = 1; i < 5; i++) writel(tmp, &dev->ep[i].cfg->ep_cfg); @@ -1896,9 +2008,15 @@ static void usb_reset_338x(struct net2280 *dev) /* clear old dma and irq state */ for (tmp = 0; tmp < 4; tmp++) { struct net2280_ep *ep = &dev->ep[tmp + 1]; + struct net2280_dma_regs __iomem *dma; - if (ep->dma) + if (ep->dma) { abort_dma(ep); + } else { + dma = &dev->dma[tmp]; + writel(BIT(DMA_ABORT), &dma->dmastat); + writel(0, &dma->dmactl); + } } writel(~0, &dev->regs->irqstat0), writel(~0, &dev->regs->irqstat1); @@ -1977,7 +2095,7 @@ static void usb_reinit_338x(struct net2280 *dev) for (i = 0; i < dev->n_ep; i++) { struct net2280_ep *ep = &dev->ep[i]; - ep->ep.name = ep_name[i]; + ep->ep.name = dev->enhanced_mode ? ep_name_adv[i] : ep_name[i]; ep->dev = dev; ep->num = i; @@ -1986,14 +2104,18 @@ static void usb_reinit_338x(struct net2280 *dev) if (dev->enhanced_mode) { ep->cfg = &dev->epregs[ne[i]]; + /* + * Set USB endpoint number, hardware allows same number + * in both directions. + */ + if (i > 0 && i < 5) + writel(ne[i], &ep->cfg->ep_cfg); ep->regs = (struct net2280_ep_regs __iomem *) (((void __iomem *)&dev->epregs[ne[i]]) + ep_reg_addr[i]); - ep->fiforegs = &dev->fiforegs[i]; } else { ep->cfg = &dev->epregs[i]; ep->regs = &dev->epregs[i]; - ep->fiforegs = &dev->fiforegs[i]; } ep->fifo_size = (i != 0) ? 2048 : 512; @@ -2186,7 +2308,6 @@ static int net2280_start(struct usb_gadget *_gadget, dev->ep[i].irqs = 0; /* hook up the driver ... */ - dev->softconnect = 1; driver->driver.bus = NULL; dev->driver = driver; @@ -2798,6 +2919,26 @@ next_endpoints3: return; } +static void usb338x_handle_ep_intr(struct net2280 *dev, u32 stat0) +{ + u32 index; + u32 bit; + + for (index = 0; index < ARRAY_SIZE(ep_bit); index++) { + bit = BIT(ep_bit[index]); + + if (!stat0) + break; + + if (!(stat0 & bit)) + continue; + + stat0 &= ~bit; + + handle_ep_small(&dev->ep[index]); + } +} + static void handle_stat0_irqs(struct net2280 *dev, u32 stat) { struct net2280_ep *ep; @@ -3022,20 +3163,31 @@ do_stall: #undef w_length next_endpoints: - /* endpoint data irq ? */ - scratch = stat & 0x7f; - stat &= ~0x7f; - for (num = 0; scratch; num++) { - u32 t; - - /* do this endpoint's FIFO and queue need tending? */ - t = BIT(num); - if ((scratch & t) == 0) - continue; - scratch ^= t; + if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) { + u32 mask = (BIT(ENDPOINT_0_INTERRUPT) | + USB3380_IRQSTAT0_EP_INTR_MASK_IN | + USB3380_IRQSTAT0_EP_INTR_MASK_OUT); + + if (stat & mask) { + usb338x_handle_ep_intr(dev, stat & mask); + stat &= ~mask; + } + } else { + /* endpoint data irq ? */ + scratch = stat & 0x7f; + stat &= ~0x7f; + for (num = 0; scratch; num++) { + u32 t; + + /* do this endpoint's FIFO and queue need tending? */ + t = BIT(num); + if ((scratch & t) == 0) + continue; + scratch ^= t; - ep = &dev->ep[num]; - handle_ep_small(ep); + ep = &dev->ep[num]; + handle_ep_small(ep); + } } if (stat) @@ -3052,6 +3204,8 @@ next_endpoints: BIT(PCI_RETRY_ABORT_INTERRUPT)) static void handle_stat1_irqs(struct net2280 *dev, u32 stat) +__releases(dev->lock) +__acquires(dev->lock) { struct net2280_ep *ep; u32 tmp, num, mask, scratch; @@ -3373,8 +3527,6 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) u32 usbstat; dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *) (base + 0x00b4); - dev->fiforegs = (struct usb338x_fifo_regs __iomem *) - (base + 0x0500); dev->llregs = (struct usb338x_ll_regs __iomem *) (base + 0x0700); dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *) diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h index ac8d5a20a378..4dff60d34f73 100644 --- a/drivers/usb/gadget/udc/net2280.h +++ b/drivers/usb/gadget/udc/net2280.h @@ -96,7 +96,6 @@ struct net2280_ep { struct net2280_ep_regs __iomem *regs; struct net2280_dma_regs __iomem *dma; struct net2280_dma *dummy; - struct usb338x_fifo_regs __iomem *fiforegs; dma_addr_t td_dma; /* of dummy */ struct net2280 *dev; unsigned long irqs; @@ -181,7 +180,6 @@ struct net2280 { struct net2280_dma_regs __iomem *dma; struct net2280_dep_regs __iomem *dep; struct net2280_ep_regs __iomem *epregs; - struct usb338x_fifo_regs __iomem *fiforegs; struct usb338x_ll_regs __iomem *llregs; struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 6a855fc9bd84..b51226abade6 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -93,50 +93,46 @@ static void handle_ep(struct pxa_ep *ep); static int state_dbg_show(struct seq_file *s, void *p) { struct pxa_udc *udc = s->private; - int pos = 0, ret; u32 tmp; - ret = -ENODEV; if (!udc->driver) - goto out; + return -ENODEV; /* basic device status */ - pos += seq_printf(s, DRIVER_DESC "\n" - "%s version: %s\nGadget driver: %s\n", - driver_name, DRIVER_VERSION, - udc->driver ? udc->driver->driver.name : "(none)"); + seq_printf(s, DRIVER_DESC "\n" + "%s version: %s\n" + "Gadget driver: %s\n", + driver_name, DRIVER_VERSION, + udc->driver ? udc->driver->driver.name : "(none)"); tmp = udc_readl(udc, UDCCR); - pos += seq_printf(s, - "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), " - "con=%d,inter=%d,altinter=%d\n", tmp, - (tmp & UDCCR_OEN) ? " oen":"", - (tmp & UDCCR_AALTHNP) ? " aalthnp":"", - (tmp & UDCCR_AHNP) ? " rem" : "", - (tmp & UDCCR_BHNP) ? " rstir" : "", - (tmp & UDCCR_DWRE) ? " dwre" : "", - (tmp & UDCCR_SMAC) ? " smac" : "", - (tmp & UDCCR_EMCE) ? " emce" : "", - (tmp & UDCCR_UDR) ? " udr" : "", - (tmp & UDCCR_UDA) ? " uda" : "", - (tmp & UDCCR_UDE) ? " ude" : "", - (tmp & UDCCR_ACN) >> UDCCR_ACN_S, - (tmp & UDCCR_AIN) >> UDCCR_AIN_S, - (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S); + seq_printf(s, + "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), con=%d,inter=%d,altinter=%d\n", + tmp, + (tmp & UDCCR_OEN) ? " oen":"", + (tmp & UDCCR_AALTHNP) ? " aalthnp":"", + (tmp & UDCCR_AHNP) ? " rem" : "", + (tmp & UDCCR_BHNP) ? " rstir" : "", + (tmp & UDCCR_DWRE) ? " dwre" : "", + (tmp & UDCCR_SMAC) ? " smac" : "", + (tmp & UDCCR_EMCE) ? " emce" : "", + (tmp & UDCCR_UDR) ? " udr" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : "", + (tmp & UDCCR_ACN) >> UDCCR_ACN_S, + (tmp & UDCCR_AIN) >> UDCCR_AIN_S, + (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S); /* registers for device and ep0 */ - pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n", - udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1)); - pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n", - udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1)); - pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR)); - pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, " - "reconfig=%lu\n", - udc->stats.irqs_reset, udc->stats.irqs_suspend, - udc->stats.irqs_resume, udc->stats.irqs_reconfig); - - ret = 0; -out: - return ret; + seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n", + udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1)); + seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n", + udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1)); + seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR)); + seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, reconfig=%lu\n", + udc->stats.irqs_reset, udc->stats.irqs_suspend, + udc->stats.irqs_resume, udc->stats.irqs_reconfig); + + return 0; } static int queues_dbg_show(struct seq_file *s, void *p) @@ -144,75 +140,67 @@ static int queues_dbg_show(struct seq_file *s, void *p) struct pxa_udc *udc = s->private; struct pxa_ep *ep; struct pxa27x_request *req; - int pos = 0, i, maxpkt, ret; + int i, maxpkt; - ret = -ENODEV; if (!udc->driver) - goto out; + return -ENODEV; /* dump endpoint queues */ for (i = 0; i < NR_PXA_ENDPOINTS; i++) { ep = &udc->pxa_ep[i]; maxpkt = ep->fifo_size; - pos += seq_printf(s, "%-12s max_pkt=%d %s\n", - EPNAME(ep), maxpkt, "pio"); + seq_printf(s, "%-12s max_pkt=%d %s\n", + EPNAME(ep), maxpkt, "pio"); if (list_empty(&ep->queue)) { - pos += seq_printf(s, "\t(nothing queued)\n"); + seq_puts(s, "\t(nothing queued)\n"); continue; } list_for_each_entry(req, &ep->queue, queue) { - pos += seq_printf(s, "\treq %p len %d/%d buf %p\n", - &req->req, req->req.actual, - req->req.length, req->req.buf); + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); } } - ret = 0; -out: - return ret; + return 0; } static int eps_dbg_show(struct seq_file *s, void *p) { struct pxa_udc *udc = s->private; struct pxa_ep *ep; - int pos = 0, i, ret; + int i; u32 tmp; - ret = -ENODEV; if (!udc->driver) - goto out; + return -ENODEV; ep = &udc->pxa_ep[0]; tmp = udc_ep_readl(ep, UDCCSR); - pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp, - (tmp & UDCCSR0_SA) ? " sa" : "", - (tmp & UDCCSR0_RNE) ? " rne" : "", - (tmp & UDCCSR0_FST) ? " fst" : "", - (tmp & UDCCSR0_SST) ? " sst" : "", - (tmp & UDCCSR0_DME) ? " dme" : "", - (tmp & UDCCSR0_IPR) ? " ipr" : "", - (tmp & UDCCSR0_OPC) ? " opc" : ""); + seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", + tmp, + (tmp & UDCCSR0_SA) ? " sa" : "", + (tmp & UDCCSR0_RNE) ? " rne" : "", + (tmp & UDCCSR0_FST) ? " fst" : "", + (tmp & UDCCSR0_SST) ? " sst" : "", + (tmp & UDCCSR0_DME) ? " dme" : "", + (tmp & UDCCSR0_IPR) ? " ipr" : "", + (tmp & UDCCSR0_OPC) ? " opc" : ""); for (i = 0; i < NR_PXA_ENDPOINTS; i++) { ep = &udc->pxa_ep[i]; tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR); - pos += seq_printf(s, "%-12s: " - "IN %lu(%lu reqs), OUT %lu(%lu reqs), " - "irqs=%lu, udccr=0x%08x, udccsr=0x%03x, " - "udcbcr=%d\n", - EPNAME(ep), - ep->stats.in_bytes, ep->stats.in_ops, - ep->stats.out_bytes, ep->stats.out_ops, - ep->stats.irqs, - tmp, udc_ep_readl(ep, UDCCSR), - udc_ep_readl(ep, UDCBCR)); + seq_printf(s, "%-12s: IN %lu(%lu reqs), OUT %lu(%lu reqs), irqs=%lu, udccr=0x%08x, udccsr=0x%03x, udcbcr=%d\n", + EPNAME(ep), + ep->stats.in_bytes, ep->stats.in_ops, + ep->stats.out_bytes, ep->stats.out_ops, + ep->stats.irqs, + tmp, udc_ep_readl(ep, UDCCSR), + udc_ep_readl(ep, UDCBCR)); } - ret = 0; -out: - return ret; + return 0; } static int eps_dbg_open(struct inode *inode, struct file *file) @@ -2399,7 +2387,7 @@ static struct pxa_udc memory = { }; #if defined(CONFIG_OF) -static struct of_device_id udc_pxa_dt_ids[] = { +static const struct of_device_id udc_pxa_dt_ids[] = { { .compatible = "marvell,pxa270-udc" }, {} }; diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index 2495fe9c95c5..0293f7169dee 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1820,7 +1820,7 @@ static const struct usb_gadget_ops r8a66597_gadget_ops = { .set_selfpowered = r8a66597_set_selfpowered, }; -static int __exit r8a66597_remove(struct platform_device *pdev) +static int r8a66597_remove(struct platform_device *pdev) { struct r8a66597 *r8a66597 = platform_get_drvdata(pdev); @@ -1974,7 +1974,7 @@ clean_up2: /*-------------------------------------------------------------------------*/ static struct platform_driver r8a66597_driver = { - .remove = __exit_p(r8a66597_remove), + .remove = r8a66597_remove, .driver = { .name = (char *) udc_name, }, diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index b808951491cc..5d9aa81969b4 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -92,40 +92,38 @@ static struct s3c2410_udc_mach_info *udc_info; static uint32_t s3c2410_ticks = 0; -static int dprintk(int level, const char *fmt, ...) +__printf(2, 3) +static void dprintk(int level, const char *fmt, ...) { - static char printk_buf[1024]; static long prevticks; static int invocation; + struct va_format vaf; va_list args; - int len; if (level > USB_S3C2410_DEBUG_LEVEL) - return 0; + return; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; if (s3c2410_ticks != prevticks) { prevticks = s3c2410_ticks; invocation = 0; } - len = scnprintf(printk_buf, - sizeof(printk_buf), "%1lu.%02d USB: ", - prevticks, invocation++); + pr_debug("%1lu.%02d USB: %pV", prevticks, invocation++, &vaf); - va_start(args, fmt); - len = vscnprintf(printk_buf+len, - sizeof(printk_buf)-len, fmt, args); va_end(args); - - pr_debug("%s", printk_buf); - return len; } #else -static int dprintk(int level, const char *fmt, ...) +__printf(2, 3) +static void dprintk(int level, const char *fmt, ...) { - return 0; } #endif + static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) { u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; @@ -1487,7 +1485,7 @@ static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on) dprintk(DEBUG_NORMAL, "%s()\n", __func__); - s3c2410_udc_set_pullup(udc, is_on ? 0 : 1); + s3c2410_udc_set_pullup(udc, is_on); return 0; } diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index 5a81cb086b99..89ed5e71a199 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -35,6 +35,8 @@ * @dev - the child device to the actual controller * @gadget - the gadget. For use by the class code * @list - for use by the udc class driver + * @vbus - for udcs who care about vbus status, this value is real vbus status; + * for udcs who do not care about vbus status, this value is always true * * This represents the internal data structure which is used by the UDC-class * to hold information about udc driver and gadget together. @@ -44,6 +46,7 @@ struct usb_udc { struct usb_gadget *gadget; struct device dev; struct list_head list; + bool vbus; }; static struct class *udc_class; @@ -57,13 +60,15 @@ static DEFINE_MUTEX(udc_lock); int usb_gadget_map_request(struct usb_gadget *gadget, struct usb_request *req, int is_in) { + struct device *dev = gadget->dev.parent; + if (req->length == 0) return 0; if (req->num_sgs) { int mapped; - mapped = dma_map_sg(&gadget->dev, req->sg, req->num_sgs, + mapped = dma_map_sg(dev, req->sg, req->num_sgs, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); if (mapped == 0) { dev_err(&gadget->dev, "failed to map SGs\n"); @@ -72,11 +77,11 @@ int usb_gadget_map_request(struct usb_gadget *gadget, req->num_mapped_sgs = mapped; } else { - req->dma = dma_map_single(&gadget->dev, req->buf, req->length, + req->dma = dma_map_single(dev, req->buf, req->length, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - if (dma_mapping_error(&gadget->dev, req->dma)) { - dev_err(&gadget->dev, "failed to map buffer\n"); + if (dma_mapping_error(dev, req->dma)) { + dev_err(dev, "failed to map buffer\n"); return -EFAULT; } } @@ -92,12 +97,12 @@ void usb_gadget_unmap_request(struct usb_gadget *gadget, return; if (req->num_mapped_sgs) { - dma_unmap_sg(&gadget->dev, req->sg, req->num_mapped_sgs, + dma_unmap_sg(gadget->dev.parent, req->sg, req->num_mapped_sgs, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); req->num_mapped_sgs = 0; } else { - dma_unmap_single(&gadget->dev, req->dma, req->length, + dma_unmap_single(gadget->dev.parent, req->dma, req->length, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); } } @@ -128,21 +133,11 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request); static void usb_gadget_state_work(struct work_struct *work) { - struct usb_gadget *gadget = work_to_gadget(work); - struct usb_udc *udc = NULL; - - mutex_lock(&udc_lock); - list_for_each_entry(udc, &udc_list, list) - if (udc->gadget == gadget) - goto found; - mutex_unlock(&udc_lock); - - return; - -found: - mutex_unlock(&udc_lock); + struct usb_gadget *gadget = work_to_gadget(work); + struct usb_udc *udc = gadget->udc; - sysfs_notify(&udc->dev.kobj, NULL, "state"); + if (udc) + sysfs_notify(&udc->dev.kobj, NULL, "state"); } void usb_gadget_set_state(struct usb_gadget *gadget, @@ -155,6 +150,34 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state); /* ------------------------------------------------------------------------- */ +static void usb_udc_connect_control(struct usb_udc *udc) +{ + if (udc->vbus) + usb_gadget_connect(udc->gadget); + else + usb_gadget_disconnect(udc->gadget); +} + +/** + * usb_udc_vbus_handler - updates the udc core vbus status, and try to + * connect or disconnect gadget + * @gadget: The gadget which vbus change occurs + * @status: The vbus status + * + * The udc driver calls it when it wants to connect or disconnect gadget + * according to vbus status. + */ +void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status) +{ + struct usb_udc *udc = gadget->udc; + + if (udc) { + udc->vbus = status; + usb_udc_connect_control(udc); + } +} +EXPORT_SYMBOL_GPL(usb_udc_vbus_handler); + /** * usb_gadget_udc_reset - notifies the udc core that bus reset occurs * @gadget: The gadget which bus reset occurs @@ -278,6 +301,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, goto err3; udc->gadget = gadget; + gadget->udc = udc; mutex_lock(&udc_lock); list_add_tail(&udc->list, &udc_list); @@ -287,6 +311,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, goto err4; usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED); + udc->vbus = true; mutex_unlock(&udc_lock); @@ -298,6 +323,7 @@ err4: err3: put_device(&udc->dev); + device_del(&gadget->dev); err2: put_device(&gadget->dev); @@ -348,21 +374,14 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) */ void usb_del_gadget_udc(struct usb_gadget *gadget) { - struct usb_udc *udc = NULL; - - mutex_lock(&udc_lock); - list_for_each_entry(udc, &udc_list, list) - if (udc->gadget == gadget) - goto found; - - dev_err(gadget->dev.parent, "gadget not registered.\n"); - mutex_unlock(&udc_lock); + struct usb_udc *udc = gadget->udc; - return; + if (!udc) + return; -found: dev_vdbg(gadget->dev.parent, "unregistering gadget\n"); + mutex_lock(&udc_lock); list_del(&udc->list); mutex_unlock(&udc_lock); @@ -397,7 +416,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri driver->unbind(udc->gadget); goto err1; } - usb_gadget_connect(udc->gadget); + usb_udc_connect_control(udc); kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); return 0; diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index dd3e9fd31b80..1f24274477ab 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -2071,8 +2071,8 @@ static int xudc_probe(struct platform_device *pdev) /* Map the registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); udc->addr = devm_ioremap_resource(&pdev->dev, res); - if (!udc->addr) - return -ENOMEM; + if (IS_ERR(udc->addr)) + return PTR_ERR(udc->addr); irq = platform_get_irq(pdev, 0); if (irq < 0) { diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e46dc2b..8afc3c1efdab 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -137,7 +137,7 @@ config XPS_USB_HCD_XILINX devices only. config USB_EHCI_FSL - bool "Support for Freescale PPC on-chip EHCI USB controller" + tristate "Support for Freescale PPC on-chip EHCI USB controller" depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF @@ -198,7 +198,7 @@ config USB_EHCI_HCD_AT91 config USB_EHCI_MSM tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" - depends on ARCH_MSM || ARCH_QCOM + depends on ARCH_QCOM select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for the USB Host controller present on the @@ -295,7 +295,7 @@ config USB_OCTEON_EHCI bool "Octeon on-chip EHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC default n - select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN select USB_EHCI_HCD_PLATFORM help This option is deprecated now and the driver was removed, use @@ -568,7 +568,7 @@ config USB_OCTEON_OHCI bool "Octeon on-chip OHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC default USB_OCTEON_EHCI - select USB_OHCI_BIG_ENDIAN_MMIO + select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN select USB_OHCI_LITTLE_ENDIAN select USB_OHCI_HCD_PLATFORM help diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 65b0b6a58599..754efaa8ccf8 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -24,7 +24,9 @@ endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ -obj-$(CONFIG_PCI) += pci-quirks.o +ifneq ($(CONFIG_USB), ) + obj-$(CONFIG_PCI) += pci-quirks.o +endif obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o @@ -70,6 +72,7 @@ obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o +obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 524cbf26d992..b26b96e25a13 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -628,7 +628,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) unsigned i; __hc32 tag; - if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC))) + seen = kmalloc(DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC); + if (!seen) return 0; seen_count = 0; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index ab4eee3df97a..5352e74b92e2 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,6 +1,6 @@ /* * Copyright 2005-2009 MontaVista Software, Inc. - * Copyright 2008,2012 Freescale Semiconductor, Inc. + * Copyright 2008,2012,2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -24,29 +24,38 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/types.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/err.h> +#include <linux/usb.h> +#include <linux/usb/ehci_def.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> #include <linux/platform_device.h> #include <linux/fsl_devices.h> +#include "ehci.h" #include "ehci-fsl.h" +#define DRIVER_DESC "Freescale EHCI Host controller driver" +#define DRV_NAME "ehci-fsl" + +static struct hc_driver __read_mostly fsl_ehci_hc_driver; + /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ -/** - * usb_hcd_fsl_probe - initialize FSL-based HCDs - * @drvier: Driver to be used for this HCD +/* + * fsl_ehci_drv_probe - initialize FSL-based HCDs * @pdev: USB Host Controller being probed * Context: !in_interrupt() * * Allocates basic resources for this USB host controller. * */ -static int usb_hcd_fsl_probe(const struct hc_driver *driver, - struct platform_device *pdev) +static int fsl_ehci_drv_probe(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata; struct usb_hcd *hcd; @@ -86,7 +95,8 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, } irq = res->start; - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + hcd = usb_create_hcd(&fsl_ehci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); if (!hcd) { retval = -ENOMEM; goto err1; @@ -159,38 +169,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, return retval; } -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - -/** - * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs - * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_fsl_probe(). - * - */ -static void usb_hcd_fsl_remove(struct usb_hcd *hcd, - struct platform_device *pdev) -{ - struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); - - if (!IS_ERR_OR_NULL(hcd->usb_phy)) { - otg_set_host(hcd->usb_phy->otg, NULL); - usb_put_phy(hcd->usb_phy); - } - - usb_remove_hcd(hcd); - - /* - * do platform specific un-initialization: - * release iomux pins, disable clock, etc. - */ - if (pdata->exit) - pdata->exit(pdev); - usb_put_hcd(hcd); -} - static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) @@ -636,79 +614,77 @@ static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) #define ehci_start_port_reset NULL #endif /* CONFIG_USB_OTG */ +static struct ehci_driver_overrides ehci_fsl_overrides __initdata = { + .extra_priv_size = sizeof(struct ehci_fsl), + .reset = ehci_fsl_setup, +}; -static const struct hc_driver ehci_fsl_hc_driver = { - .description = hcd_name, - .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_fsl), +/** + * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_fsl_probe(). + * + */ - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY | HCD_BH, +static int fsl_ehci_drv_remove(struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); - /* - * basic lifecycle operations - */ - .reset = ehci_fsl_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, + if (!IS_ERR_OR_NULL(hcd->usb_phy)) { + otg_set_host(hcd->usb_phy->otg, NULL); + usb_put_phy(hcd->usb_phy); + } - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, + usb_remove_hcd(hcd); /* - * scheduling support + * do platform specific un-initialization: + * release iomux pins, disable clock, etc. */ - .get_frame_number = ehci_get_frame, + if (pdata->exit) + pdata->exit(pdev); + usb_put_hcd(hcd); - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .start_port_reset = ehci_start_port_reset, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, + return 0; +} + +static struct platform_driver ehci_fsl_driver = { + .probe = fsl_ehci_drv_probe, + .remove = fsl_ehci_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "fsl-ehci", + .pm = EHCI_FSL_PM_OPS, + }, }; -static int ehci_fsl_drv_probe(struct platform_device *pdev) +static int __init ehci_fsl_init(void) { if (usb_disabled()) return -ENODEV; - /* FIXME we only want one one probe() not two */ - return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); -} + pr_info(DRV_NAME ": " DRIVER_DESC "\n"); -static int ehci_fsl_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); + ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides); - /* FIXME we only want one one remove() not two */ - usb_hcd_fsl_remove(hcd, pdev); - return 0; + fsl_ehci_hc_driver.product_desc = + "Freescale On-Chip EHCI Host Controller"; + fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset; + + + return platform_driver_register(&ehci_fsl_driver); } +module_init(ehci_fsl_init); -MODULE_ALIAS("platform:fsl-ehci"); +static void __exit ehci_fsl_cleanup(void) +{ + platform_driver_unregister(&ehci_fsl_driver); +} +module_exit(ehci_fsl_cleanup); -static struct platform_driver ehci_fsl_driver = { - .probe = ehci_fsl_drv_probe, - .remove = ehci_fsl_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "fsl-ehci", - .pm = EHCI_FSL_PM_OPS, - }, -}; +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 85e56d1abd23..c63d82c91f10 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -239,7 +239,7 @@ static void tdi_reset (struct ehci_hcd *ehci) * Reset a non-running (STS_HALT == 1) controller. * Must be called with interrupts enabled and the lock not held. */ -static int ehci_reset (struct ehci_hcd *ehci) +int ehci_reset(struct ehci_hcd *ehci) { int retval; u32 command = ehci_readl(ehci, &ehci->regs->command); @@ -275,6 +275,7 @@ static int ehci_reset (struct ehci_hcd *ehci) ehci->resuming_ports = 0; return retval; } +EXPORT_SYMBOL_GPL(ehci_reset); /* * Idle the controller (turn off the schedules). @@ -792,12 +793,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) ehci->reset_done[i] == 0)) continue; - /* start 20 msec resume signaling from this port, - * and make hub_wq collect PORT_STAT_C_SUSPEND to - * stop that signaling. Use 5 ms extra for safety, - * like usb_port_resume() does. + /* start USB_RESUME_TIMEOUT msec resume signaling from + * this port, and make hub_wq collect + * PORT_STAT_C_SUSPEND to stop that signaling. */ - ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); + ehci->reset_done[i] = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); set_bit(i, &ehci->resuming_ports); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); usb_hcd_start_port_resume(&hcd->self, i); @@ -1250,11 +1251,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR (DRIVER_AUTHOR); MODULE_LICENSE ("GPL"); -#ifdef CONFIG_USB_EHCI_FSL -#include "ehci-fsl.c" -#define PLATFORM_DRIVER ehci_fsl_driver -#endif - #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 87cf86f38b36..22abb6830dfa 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -155,7 +155,7 @@ static int ehci_port_change(struct ehci_hcd *ehci) return 0; } -static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, +void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, bool suspending, bool do_wakeup) { int port; @@ -220,6 +220,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, spin_unlock_irq(&ehci->lock); } +EXPORT_SYMBOL_GPL(ehci_adjust_port_wakeup_flags); static int ehci_bus_suspend (struct usb_hcd *hcd) { @@ -471,10 +472,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd) ehci_writel(ehci, temp, &ehci->regs->port_status [i]); } - /* msleep for 20ms only if code is trying to resume port */ + /* + * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume + * port + */ if (resume_needed) { spin_unlock_irq(&ehci->lock); - msleep(20); + msleep(USB_RESUME_TIMEOUT); spin_lock_irq(&ehci->lock); if (ehci->shutdown) goto shutdown; @@ -688,7 +692,7 @@ ehci_hub_descriptor ( int ports = HCS_N_PORTS (ehci->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -942,7 +946,7 @@ int ehci_hub_control( temp &= ~PORT_WAKE_BITS; ehci_writel(ehci, temp | PORT_RESUME, status_reg); ehci->reset_done[wIndex] = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); set_bit(wIndex, &ehci->resuming_ports); usb_hcd_start_port_resume(&hcd->self, wIndex); break; diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 9db74ca7e5b9..275c92e53a59 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -88,13 +88,20 @@ static int ehci_msm_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); + if (!res) { + dev_err(&pdev->dev, "Unable to get memory resource\n"); + ret = -ENODEV; goto put_hcd; } + hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); + hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto put_hcd; + } /* * OTG driver takes care of PHY initialization, clock management, diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index f6eafecab15c..bfcbb9aa8816 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -29,7 +29,13 @@ #define wrl(off, val) writel_relaxed((val), hcd->regs + (off)) #define USB_CMD 0x140 +#define USB_CMD_RUN BIT(0) +#define USB_CMD_RESET BIT(1) #define USB_MODE 0x1a8 +#define USB_MODE_MASK GENMASK(1, 0) +#define USB_MODE_DEVICE 0x2 +#define USB_MODE_HOST 0x3 +#define USB_MODE_SDIS BIT(4) #define USB_CAUSE 0x310 #define USB_MASK 0x314 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) @@ -69,8 +75,8 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) /* * Reset controller */ - wrl(USB_CMD, rdl(USB_CMD) | 0x2); - while (rdl(USB_CMD) & 0x2); + wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); + while (rdl(USB_CMD) & USB_CMD_RESET); /* * GL# USB-10: Set IPG for non start of frame packets @@ -112,16 +118,16 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) /* * Stop and reset controller */ - wrl(USB_CMD, rdl(USB_CMD) & ~0x1); - wrl(USB_CMD, rdl(USB_CMD) | 0x2); - while (rdl(USB_CMD) & 0x2); + wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN); + wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); + while (rdl(USB_CMD) & USB_CMD_RESET); /* * GL# USB-5 Streaming disable REG_USB_MODE[4]=1 * TBD: This need to be done after each reset! * GL# USB-4 Setup USB Host mode */ - wrl(USB_MODE, 0x13); + wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST); } static void diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index d8a75a51d6d4..2593def13cea 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -88,15 +88,13 @@ static int ehci_platform_power_on(struct platform_device *dev) } for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { - if (priv->phys[phy_num]) { - ret = phy_init(priv->phys[phy_num]); - if (ret) - goto err_exit_phy; - ret = phy_power_on(priv->phys[phy_num]); - if (ret) { - phy_exit(priv->phys[phy_num]); - goto err_exit_phy; - } + ret = phy_init(priv->phys[phy_num]); + if (ret) + goto err_exit_phy; + ret = phy_power_on(priv->phys[phy_num]); + if (ret) { + phy_exit(priv->phys[phy_num]); + goto err_exit_phy; } } @@ -104,10 +102,8 @@ static int ehci_platform_power_on(struct platform_device *dev) err_exit_phy: while (--phy_num >= 0) { - if (priv->phys[phy_num]) { - phy_power_off(priv->phys[phy_num]); - phy_exit(priv->phys[phy_num]); - } + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); } err_disable_clks: while (--clk >= 0) @@ -123,10 +119,8 @@ static void ehci_platform_power_off(struct platform_device *dev) int clk, phy_num; for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { - if (priv->phys[phy_num]) { - phy_power_off(priv->phys[phy_num]); - phy_exit(priv->phys[phy_num]); - } + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); } for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) @@ -154,7 +148,6 @@ static int ehci_platform_probe(struct platform_device *dev) struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); struct ehci_platform_priv *priv; struct ehci_hcd *ehci; - const char *phy_name; int err, irq, phy_num, clk = 0; if (usb_disabled()) @@ -202,38 +195,28 @@ static int ehci_platform_probe(struct platform_device *dev) "needs-reset-on-resume")) pdata->reset_on_resume = 1; + if (of_property_read_bool(dev->dev.of_node, + "has-transaction-translator")) + pdata->has_tt = 1; + priv->num_phys = of_count_phandle_with_args(dev->dev.of_node, "phys", "#phy-cells"); - priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1; - priv->phys = devm_kcalloc(&dev->dev, priv->num_phys, - sizeof(struct phy *), GFP_KERNEL); - if (!priv->phys) - return -ENOMEM; + if (priv->num_phys > 0) { + priv->phys = devm_kcalloc(&dev->dev, priv->num_phys, + sizeof(struct phy *), GFP_KERNEL); + if (!priv->phys) + return -ENOMEM; + } else + priv->num_phys = 0; for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { - err = of_property_read_string_index( - dev->dev.of_node, - "phy-names", phy_num, - &phy_name); - - if (err < 0) { - if (priv->num_phys > 1) { - dev_err(&dev->dev, "phy-names not provided"); - goto err_put_hcd; - } else - phy_name = "usb"; - } - - priv->phys[phy_num] = devm_phy_get(&dev->dev, - phy_name); - if (IS_ERR(priv->phys[phy_num])) { - err = PTR_ERR(priv->phys[phy_num]); - if ((priv->num_phys > 1) || - (err == -EPROBE_DEFER)) - goto err_put_hcd; - priv->phys[phy_num] = NULL; - } + priv->phys[phy_num] = devm_of_phy_get_by_index( + &dev->dev, dev->dev.of_node, phy_num); + if (IS_ERR(priv->phys[phy_num])) { + err = PTR_ERR(priv->phys[phy_num]); + goto err_put_hcd; + } } for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index ff9af29b4e9f..4031b372008e 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -304,6 +304,7 @@ struct dma_aligned_buffer { static void free_dma_aligned_buffer(struct urb *urb) { struct dma_aligned_buffer *temp; + size_t length; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; @@ -311,9 +312,14 @@ static void free_dma_aligned_buffer(struct urb *urb) temp = container_of(urb->transfer_buffer, struct dma_aligned_buffer, data); - if (usb_urb_dir_in(urb)) - memcpy(temp->old_xfer_buffer, temp->data, - urb->transfer_buffer_length); + if (usb_urb_dir_in(urb)) { + if (usb_pipeisoc(urb->pipe)) + length = urb->transfer_buffer_length; + else + length = urb->actual_length; + + memcpy(temp->old_xfer_buffer, temp->data, length); + } urb->transfer_buffer = temp->old_xfer_buffer; kfree(temp->kmalloc_ptr); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 52ef0844a180..f700157cd084 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -868,10 +868,13 @@ extern void ehci_init_driver(struct hc_driver *drv, extern int ehci_setup(struct usb_hcd *hcd); extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr, u32 mask, u32 done, int usec); +extern int ehci_reset(struct ehci_hcd *ehci); #ifdef CONFIG_PM extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup); extern int ehci_resume(struct usb_hcd *hcd, bool force_reset); +extern void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, + bool suspending, bool do_wakeup); #endif /* CONFIG_PM */ extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c index 70116a65262c..3bacdd7befe9 100644 --- a/drivers/usb/host/fhci-hub.c +++ b/drivers/usb/host/fhci-hub.c @@ -30,7 +30,7 @@ /* virtual root hub specific descriptor */ static u8 root_hub_des[] = { 0x09, /* blength */ - 0x29, /* bDescriptorType;hub-descriptor */ + USB_DT_HUB, /* bDescriptorType;hub-descriptor */ 0x01, /* bNbrPorts */ HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */ 0x00, /* per-port power, no overcurrent */ diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 475b21fd373b..000ed80ab592 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1509,7 +1509,7 @@ fotg210_hub_descriptor( int ports = HCS_N_PORTS(fotg210->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* fotg210 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -1595,7 +1595,7 @@ static int fotg210_hub_control( /* resume signaling for 20 msec */ fotg210_writel(fotg210, temp | PORT_RESUME, status_reg); fotg210->reset_done[wIndex] = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); break; case USB_PORT_FEAT_C_SUSPEND: clear_bit(wIndex, &fotg210->port_c_suspend); diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 7e325e90d7d9..5e0d60035216 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -126,6 +126,8 @@ static int usb_get_ver_info(struct device_node *np) /* * returns 1 for usb controller version 1.6 * returns 2 for usb controller version 2.2 + * returns 3 for usb controller version 2.4 + * returns 4 for usb controller version 2.5 * returns 0 otherwise */ if (of_device_is_compatible(np, "fsl-usb2-dr")) { @@ -135,6 +137,8 @@ static int usb_get_ver_info(struct device_node *np) ver = FSL_USB_VER_2_2; else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.4")) ver = FSL_USB_VER_2_4; + else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.5")) + ver = FSL_USB_VER_2_5; else /* for previous controller versions */ ver = FSL_USB_VER_OLD; @@ -150,6 +154,10 @@ static int usb_get_ver_info(struct device_node *np) ver = FSL_USB_VER_1_6; else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2")) ver = FSL_USB_VER_2_2; + else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.4")) + ver = FSL_USB_VER_2_4; + else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.5")) + ver = FSL_USB_VER_2_5; else /* for previous controller versions */ ver = FSL_USB_VER_OLD; } diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c index a83eefefffda..1fd8718a9f11 100644 --- a/drivers/usb/host/fusbh200-hcd.c +++ b/drivers/usb/host/fusbh200-hcd.c @@ -499,7 +499,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) unsigned i; __hc32 tag; - if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC))) + seen = kmalloc(DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC); + if (!seen) return 0; seen_count = 0; @@ -1467,7 +1468,7 @@ fusbh200_hub_descriptor ( int ports = HCS_N_PORTS (fusbh200->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* fusbh200 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -1550,10 +1551,9 @@ static int fusbh200_hub_control ( if ((temp & PORT_PE) == 0) goto error; - /* resume signaling for 20 msec */ fusbh200_writel(fusbh200, temp | PORT_RESUME, status_reg); fusbh200->reset_done[wIndex] = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); break; case USB_PORT_FEAT_C_SUSPEND: clear_bit(wIndex, &fusbh200->port_c_suspend); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 6a2ad550b120..f542045dc2a6 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1474,7 +1474,7 @@ static int get_hub_descriptor(struct usb_hcd *hcd, struct usb_hub_descriptor *desc) { struct imx21 *imx21 = hcd_to_imx21(hcd); - desc->bDescriptorType = 0x29; /* HUB descriptor */ + desc->bDescriptorType = USB_DT_HUB; /* HUB descriptor */ desc->bHubContrCurrent = 0; desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 113d0cc6cc43..d089b3fb7a13 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -500,7 +500,8 @@ static void start_atl_transfers(struct isp116x *isp116x) if (isp116x->periodic_count) { isp116x->fmindex = index = (isp116x->fmindex + 1) & (PERIODIC_SIZE - 1); - if ((load = isp116x->load[index])) { + load = isp116x->load[index]; + if (load) { /* Bring all int transfers for this frame into the active queue */ isp116x->atl_active = last_ep = @@ -943,7 +944,7 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x, { u32 reg = isp116x->rhdesca; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->bHubContrCurrent = 0; desc->bNbrPorts = (u8) (reg & 0x3); @@ -1490,7 +1491,7 @@ static int isp116x_bus_resume(struct usb_hcd *hcd) spin_unlock_irq(&isp116x->lock); hcd->state = HC_STATE_RESUMING; - msleep(20); + msleep(USB_RESUME_TIMEOUT); /* Go operational */ spin_lock_irq(&isp116x->lock); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index b32ab60cad1e..6cf82ee460a6 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -1538,7 +1538,7 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd, DBG(3, "%s: enter\n", __func__); - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->bHubContrCurrent = 0; desc->bNbrPorts = reg & 0x3; diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index a98833cbfcf3..fc1fd403973a 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1659,7 +1659,7 @@ hub_descriptor(struct usb_hub_descriptor *desc) /* * See Table 11-13: Hub Descriptor in USB 2.0 spec. */ - desc->bDescriptorType = 0x29; /* hub descriptor */ + desc->bDescriptorType = USB_DT_HUB; /* hub descriptor */ desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 7cce85a1f7dc..15df00cceed9 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -39,7 +39,6 @@ struct ohci_at91_priv { struct clk *iclk; struct clk *fclk; - struct clk *uclk; struct clk *hclk; bool clocked; bool wakeup; /* Saved wake-up state for resume */ @@ -64,10 +63,8 @@ static void at91_start_clock(struct ohci_at91_priv *ohci_at91) { if (ohci_at91->clocked) return; - if (IS_ENABLED(CONFIG_COMMON_CLK)) { - clk_set_rate(ohci_at91->uclk, 48000000); - clk_prepare_enable(ohci_at91->uclk); - } + + clk_set_rate(ohci_at91->fclk, 48000000); clk_prepare_enable(ohci_at91->hclk); clk_prepare_enable(ohci_at91->iclk); clk_prepare_enable(ohci_at91->fclk); @@ -78,11 +75,10 @@ static void at91_stop_clock(struct ohci_at91_priv *ohci_at91) { if (!ohci_at91->clocked) return; + clk_disable_unprepare(ohci_at91->fclk); clk_disable_unprepare(ohci_at91->iclk); clk_disable_unprepare(ohci_at91->hclk); - if (IS_ENABLED(CONFIG_COMMON_CLK)) - clk_disable_unprepare(ohci_at91->uclk); ohci_at91->clocked = false; } @@ -191,14 +187,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, retval = PTR_ERR(ohci_at91->hclk); goto err; } - if (IS_ENABLED(CONFIG_COMMON_CLK)) { - ohci_at91->uclk = devm_clk_get(dev, "usb_clk"); - if (IS_ERR(ohci_at91->uclk)) { - dev_err(dev, "failed to get uclk\n"); - retval = PTR_ERR(ohci_at91->uclk); - goto err; - } - } board = hcd->self.controller->platform_data; ohci = hcd_to_ohci(hcd); diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 04f2186939d2..c3eded317495 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -491,7 +491,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) char *next; unsigned i; - if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC))) + seen = kmalloc(DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC); + if (!seen) return 0; seen_count = 0; @@ -506,7 +507,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) /* dump a snapshot of the periodic schedule (and load) */ spin_lock_irqsave (&ohci->lock, flags); for (i = 0; i < NUM_INTS; i++) { - if (!(ed = ohci->periodic [i])) + ed = ohci->periodic[i]; + if (!ed) continue; temp = scnprintf (next, size, "%2d [%3d]:", i, ohci->load [i]); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 1dab9dfbca6a..760cb57e954e 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -155,7 +155,8 @@ static int ohci_urb_enqueue ( int retval = 0; /* every endpoint has a ed, locate and maybe (re)initialize it */ - if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval))) + ed = ed_get(ohci, urb->ep, urb->dev, pipe, urb->interval); + if (! ed) return -ENOMEM; /* for the private part of the URB we need the number of TDs (size) */ diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index fe2aedd8a54d..ed678c17c4ea 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -536,7 +536,7 @@ ohci_hub_descriptor ( u32 rh = roothub_a (ohci); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24; desc->bHubContrCurrent = 0; diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 185ceee52d47..c2669f185f65 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -57,15 +57,13 @@ static int ohci_platform_power_on(struct platform_device *dev) } for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { - if (priv->phys[phy_num]) { - ret = phy_init(priv->phys[phy_num]); - if (ret) - goto err_exit_phy; - ret = phy_power_on(priv->phys[phy_num]); - if (ret) { - phy_exit(priv->phys[phy_num]); - goto err_exit_phy; - } + ret = phy_init(priv->phys[phy_num]); + if (ret) + goto err_exit_phy; + ret = phy_power_on(priv->phys[phy_num]); + if (ret) { + phy_exit(priv->phys[phy_num]); + goto err_exit_phy; } } @@ -73,10 +71,8 @@ static int ohci_platform_power_on(struct platform_device *dev) err_exit_phy: while (--phy_num >= 0) { - if (priv->phys[phy_num]) { - phy_power_off(priv->phys[phy_num]); - phy_exit(priv->phys[phy_num]); - } + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); } err_disable_clks: while (--clk >= 0) @@ -92,10 +88,8 @@ static void ohci_platform_power_off(struct platform_device *dev) int clk, phy_num; for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { - if (priv->phys[phy_num]) { - phy_power_off(priv->phys[phy_num]); - phy_exit(priv->phys[phy_num]); - } + phy_power_off(priv->phys[phy_num]); + phy_exit(priv->phys[phy_num]); } for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--) @@ -123,7 +117,6 @@ static int ohci_platform_probe(struct platform_device *dev) struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); struct ohci_platform_priv *priv; struct ohci_hcd *ohci; - const char *phy_name; int err, irq, phy_num, clk = 0; if (usb_disabled()) @@ -174,36 +167,22 @@ static int ohci_platform_probe(struct platform_device *dev) priv->num_phys = of_count_phandle_with_args(dev->dev.of_node, "phys", "#phy-cells"); - priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1; - priv->phys = devm_kcalloc(&dev->dev, priv->num_phys, - sizeof(struct phy *), GFP_KERNEL); - if (!priv->phys) - return -ENOMEM; + if (priv->num_phys > 0) { + priv->phys = devm_kcalloc(&dev->dev, priv->num_phys, + sizeof(struct phy *), GFP_KERNEL); + if (!priv->phys) + return -ENOMEM; + } else + priv->num_phys = 0; for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { - err = of_property_read_string_index( - dev->dev.of_node, - "phy-names", phy_num, - &phy_name); - - if (err < 0) { - if (priv->num_phys > 1) { - dev_err(&dev->dev, "phy-names not provided"); - goto err_put_hcd; - } else - phy_name = "usb"; - } - - priv->phys[phy_num] = devm_phy_get(&dev->dev, - phy_name); - if (IS_ERR(priv->phys[phy_num])) { - err = PTR_ERR(priv->phys[phy_num]); - if ((priv->num_phys > 1) || - (err == -EPROBE_DEFER)) - goto err_put_hcd; - priv->phys[phy_num] = NULL; - } + priv->phys[phy_num] = devm_of_phy_get_by_index( + &dev->dev, dev->dev.of_node, phy_num); + if (IS_ERR(priv->phys[phy_num])) { + err = PTR_ERR(priv->phys[phy_num]); + goto err_put_hcd; + } } for (clk = 0; clk < OHCI_MAX_CLKS; clk++) { diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index 1463c398d322..d029bbe9eb36 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -407,7 +407,8 @@ static struct ed *ed_get ( spin_lock_irqsave (&ohci->lock, flags); - if (!(ed = ep->hcpriv)) { + ed = ep->hcpriv; + if (!ed) { struct td *td; int is_out; u32 info; @@ -980,10 +981,6 @@ rescan_all: int completed, modified; __hc32 *prev; - /* Is this ED already invisible to the hardware? */ - if (ed->state == ED_IDLE) - goto ed_idle; - /* only take off EDs that the HC isn't using, accounting for * frame counter wraps and EDs with partially retired TDs */ @@ -1011,12 +1008,10 @@ skip_ed: } /* ED's now officially unlinked, hc doesn't see */ - ed->state = ED_IDLE; ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H); ed->hwNextED = 0; wmb(); ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE); -ed_idle: /* reentrancy: if we drop the schedule lock, someone might * have modified this list. normally it's just prepending @@ -1087,6 +1082,7 @@ rescan_this: if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; + ed->state = ED_IDLE; list_del(&ed->in_use_list); } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index e9a6eec39142..cfcfadfc94fc 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -58,7 +58,7 @@ #define CCR_PM_CKRNEN 0x0002 #define CCR_PM_USBPW1 0x0004 #define CCR_PM_USBPW2 0x0008 -#define CCR_PM_USBPW3 0x0008 +#define CCR_PM_USBPW3 0x0010 #define CCR_PM_PMEE 0x0100 #define CCR_PM_PMES 0x8000 diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index ef7efb278b15..6352f54e65a1 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -445,7 +445,7 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu, int ports = HCS_N_PORTS(oxu->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = 10; /* oxu 1.0, 2.3.9 says 20ms max */ desc->bHubContrCurrent = 0; @@ -2500,11 +2500,12 @@ static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd) || oxu->reset_done[i] != 0) continue; - /* start 20 msec resume signaling from this port, - * and make hub_wq collect PORT_STAT_C_SUSPEND to + /* start USB_RESUME_TIMEOUT resume signaling from this + * port, and make hub_wq collect PORT_STAT_C_SUSPEND to * stop that signaling. */ - oxu->reset_done[i] = jiffies + msecs_to_jiffies(20); + oxu->reset_done[i] = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); oxu_dbg(oxu, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, oxu->reset_done[i]); } diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index bdc82fea0a1f..4cbd0633c5c2 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2136,7 +2136,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf) static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597, struct usb_hub_descriptor *desc) { - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bHubContrCurrent = 0; desc->bNbrPorts = r8a66597->max_root_hub; desc->bDescLength = 9; @@ -2301,7 +2301,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) rh->port &= ~USB_PORT_STAT_SUSPEND; rh->port |= USB_PORT_STAT_C_SUSPEND << 16; r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg); - msleep(50); + msleep(USB_RESUME_TIMEOUT); r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg); } diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 4f4ba1ea9e9b..fd2a11473be7 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1091,7 +1091,7 @@ sl811h_hub_descriptor ( ) { u16 temp = 0; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bHubContrCurrent = 0; desc->bNbrPorts = 1; @@ -1259,7 +1259,7 @@ sl811h_hub_control( sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); mod_timer(&sl811->timer, jiffies - + msecs_to_jiffies(20)); + + msecs_to_jiffies(USB_RESUME_TIMEOUT)); break; case USB_PORT_FEAT_POWER: port_power(sl811, 0); @@ -1809,7 +1809,6 @@ struct platform_driver sl811h_driver = { .resume = sl811h_resume, .driver = { .name = (char *) hcd_name, - .owner = THIS_MODULE, }, }; EXPORT_SYMBOL(sl811h_driver); diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c index ffc32f4b1b1b..62b6b7804c66 100644 --- a/drivers/usb/host/ssb-hcd.c +++ b/drivers/usb/host/ssb-hcd.c @@ -105,7 +105,7 @@ static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool { struct platform_device *hci_dev; struct resource hci_res[2]; - int ret = -ENOMEM; + int ret; memset(hci_res, 0, sizeof(hci_res)); @@ -119,7 +119,7 @@ static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool hci_dev = platform_device_alloc(ohci ? "ohci-platform" : "ehci-platform" , 0); if (!hci_dev) - return NULL; + return ERR_PTR(-ENOMEM); hci_dev->dev.parent = dev->dev; hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; @@ -166,7 +166,8 @@ static int ssb_hcd_probe(struct ssb_device *dev, if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) return -EOPNOTSUPP; - usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL); + usb_dev = devm_kzalloc(dev->dev, sizeof(struct ssb_hcd_device), + GFP_KERNEL); if (!usb_dev) return -ENOMEM; @@ -181,10 +182,8 @@ static int ssb_hcd_probe(struct ssb_device *dev, start = ssb_admatch_base(tmp); len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp); usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len); - if (IS_ERR(usb_dev->ohci_dev)) { - err = PTR_ERR(usb_dev->ohci_dev); - goto err_free_usb_dev; - } + if (IS_ERR(usb_dev->ohci_dev)) + return PTR_ERR(usb_dev->ohci_dev); if (coreid == SSB_DEV_USB20_HOST) { start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */ @@ -200,8 +199,6 @@ static int ssb_hcd_probe(struct ssb_device *dev, err_unregister_ohci_dev: platform_device_unregister(usb_dev->ohci_dev); -err_free_usb_dev: - kfree(usb_dev); return err; } diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index ad97e8a1ad1c..d51687780b61 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2584,7 +2584,7 @@ static int u132_roothub_descriptor(struct u132 *u132, retval = u132_read_pcimem(u132, roothub.a, &rh_a); if (retval) return retval; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bPwrOn2PwrGood = (rh_a & RH_A_POTPGT) >> 24; desc->bHubContrCurrent = 0; desc->bNbrPorts = u132->num_ports; diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 19ba5eafb31e..ece9e37e89fe 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -15,7 +15,7 @@ static const __u8 root_hub_hub_des[] = { 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + USB_DT_HUB, /* __u8 bDescriptorType; Hub-descriptor */ 0x02, /* __u8 bNbrPorts; */ HUB_CHAR_NO_LPSM | /* __u16 wHubCharacteristics; */ HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */ @@ -166,7 +166,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci) /* Port received a wakeup request */ set_bit(port, &uhci->resuming_ports); uhci->ports_timeout = jiffies + - msecs_to_jiffies(25); + msecs_to_jiffies(USB_RESUME_TIMEOUT); usb_hcd_start_port_resume( &uhci_to_hcd(uhci)->self, port); @@ -338,7 +338,8 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, uhci_finish_suspend(uhci, port, port_addr); /* USB v2.0 7.1.7.5 */ - uhci->ports_timeout = jiffies + msecs_to_jiffies(50); + uhci->ports_timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); break; case USB_PORT_FEAT_POWER: /* UHCI has no power switching */ diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index d7b363a418de..43626c44683b 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -313,8 +313,7 @@ error_wusbhc_create: uwb_rc_put(wusbhc->uwb_rc); error: whc_clean_up(whc); - if (usb_hcd) - usb_put_hcd(usb_hcd); + usb_put_hcd(usb_hcd); return ret; } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0827d7c96527..78241b5550df 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 pls = status_reg & PORT_PLS_MASK; /* resume state is a xHCI internal state. - * Do not report it to usb core. + * Do not report it to usb core, instead, pretend to be U3, + * thus usb core knows it's not ready for transfer */ - if (pls == XDEV_RESUME) + if (pls == XDEV_RESUME) { + *status |= USB_SS_PORT_LS_U3; return; + } /* When the CAS bit is set then warm reset * should be performed on port @@ -588,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_RESET << 16; /* USB3.0 only */ if (hcd->speed == HCD_USB3) { - if ((raw_port_status & PORT_PLC)) + /* Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + if ((raw_port_status & PORT_PLC) && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) status |= USB_PORT_STAT_C_LINK_STATE << 16; if ((raw_port_status & PORT_WRC)) status |= USB_PORT_STAT_C_BH_RESET << 16; @@ -1120,10 +1130,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd) spin_lock_irqsave(&xhci->lock, flags); if (hcd->self.root_hub->do_remote_wakeup) { - if (bus_state->resuming_ports) { + if (bus_state->resuming_ports || /* USB2 */ + bus_state->port_remote_wakeup) { /* USB3 */ spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "suspend failed because " - "a port is resuming\n"); + xhci_dbg(xhci, "suspend failed because a port is resuming\n"); return -EBUSY; } } @@ -1184,6 +1194,10 @@ int xhci_bus_resume(struct usb_hcd *hcd) struct xhci_bus_state *bus_state; u32 temp; unsigned long flags; + unsigned long port_was_suspended = 0; + bool need_usb2_u3_exit = false; + int slot_id; + int sret; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1207,7 +1221,6 @@ int xhci_bus_resume(struct usb_hcd *hcd) /* Check whether need resume ports. If needed resume port and disable remote wakeup */ u32 temp; - int slot_id; temp = readl(port_array[port_index]); if (DEV_SUPERSPEED(temp)) @@ -1216,39 +1229,47 @@ int xhci_bus_resume(struct usb_hcd *hcd) temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); if (test_bit(port_index, &bus_state->bus_suspended) && (temp & PORT_PLS_MASK)) { - if (DEV_SUPERSPEED(temp)) { - xhci_set_link_state(xhci, port_array, - port_index, XDEV_U0); - } else { + set_bit(port_index, &port_was_suspended); + if (!DEV_SUPERSPEED(temp)) { xhci_set_link_state(xhci, port_array, port_index, XDEV_RESUME); - - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); - spin_lock_irqsave(&xhci->lock, flags); - - xhci_set_link_state(xhci, port_array, - port_index, XDEV_U0); + need_usb2_u3_exit = true; } - /* wait for the port to enter U0 and report port link - * state change. - */ - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); - spin_lock_irqsave(&xhci->lock, flags); - - /* Clear PLC */ - xhci_test_and_clear_bit(xhci, port_array, port_index, - PORT_PLC); - - slot_id = xhci_find_slot_id_by_port(hcd, - xhci, port_index + 1); - if (slot_id) - xhci_ring_device(xhci, slot_id); } else writel(temp, port_array[port_index]); } + if (need_usb2_u3_exit) { + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(20); + spin_lock_irqsave(&xhci->lock, flags); + } + + port_index = max_ports; + while (port_index--) { + if (!(port_was_suspended & BIT(port_index))) + continue; + /* Clear PLC to poll it later after XDEV_U0 */ + xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); + xhci_set_link_state(xhci, port_array, port_index, XDEV_U0); + } + + port_index = max_ports; + while (port_index--) { + if (!(port_was_suspended & BIT(port_index))) + continue; + /* Poll and Clear PLC */ + sret = xhci_handshake(port_array[port_index], PORT_PLC, + PORT_PLC, 10 * 1000); + if (sret) + xhci_warn(xhci, "port %d resume PLC timeout\n", + port_index); + xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); + if (slot_id) + xhci_ring_device(xhci, slot_id); + } + (void) readl(&xhci->op_regs->command); bus_state->next_statechange = jiffies + msecs_to_jiffies(5); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index f8336408ef07..9a8c936cd42c 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1427,10 +1427,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Attempt to use the ring cache */ if (virt_dev->num_rings_cached == 0) return -ENOMEM; + virt_dev->num_rings_cached--; virt_dev->eps[ep_index].new_ring = virt_dev->ring_cache[virt_dev->num_rings_cached]; virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; - virt_dev->num_rings_cached--; xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring, 1, type); } @@ -1792,7 +1792,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int size; int i, j, num_ports; - del_timer_sync(&xhci->cmd_timer); + if (timer_pending(&xhci->cmd_timer)) + del_timer_sync(&xhci->cmd_timer); /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2af32e26fafc..5590eac2b22d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -23,10 +23,15 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/acpi.h> #include "xhci.h" #include "xhci-trace.h" +#define PORT2_SSIC_CONFIG_REG2 0x883c +#define PROG_DONE (1 << 30) +#define SSIC_PORT_UNUSED (1 << 31) + /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 @@ -45,6 +50,13 @@ static const char hcd_name[] = "xhci_hcd"; static struct hc_driver __read_mostly xhci_pci_hc_driver; +static int xhci_pci_setup(struct usb_hcd *hcd); + +static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { + .extra_priv_size = sizeof(struct xhci_hcd), + .reset = xhci_pci_setup, +}; + /* called after powerup, by probe or system-pm "wakeup" */ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) { @@ -169,20 +181,63 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } /* + * In some Intel xHCI controllers, in order to get D3 working, + * through a vendor specific SSIC CONFIG register at offset 0x883c, + * SSIC PORT need to be marked as "unused" before putting xHCI + * into D3. After D3 exit, the SSIC port need to be marked as "used". + * Without this change, xHCI might not enter D3 state. * Make sure PME works on some Intel xHCI controllers by writing 1 to clear * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 */ -static void xhci_pme_quirk(struct xhci_hcd *xhci) +static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) { + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); u32 val; void __iomem *reg; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + + reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; + + /* Notify SSIC that SSIC profile programming is not done */ + val = readl(reg) & ~PROG_DONE; + writel(val, reg); + + /* Mark SSIC port as unused(suspend) or used(resume) */ + val = readl(reg); + if (suspend) + val |= SSIC_PORT_UNUSED; + else + val &= ~SSIC_PORT_UNUSED; + writel(val, reg); + + /* Notify SSIC that SSIC profile programming is done */ + val = readl(reg) | PROG_DONE; + writel(val, reg); + readl(reg); + } + reg = (void __iomem *) xhci->cap_regs + 0x80a4; val = readl(reg); writel(val | BIT(28), reg); readl(reg); } +#ifdef CONFIG_ACPI +static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) +{ + static const u8 intel_dsm_uuid[] = { + 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45, + 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23, + }; + acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL); +} +#else + static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } +#endif /* CONFIG_ACPI */ + /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { @@ -206,7 +261,6 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (!retval) return retval; - kfree(xhci); return retval; } @@ -247,11 +301,6 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) goto dealloc_usb2_hcd; } - /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset) - * is called by usb_add_hcd(). - */ - *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; - retval = usb_add_hcd(xhci->shared_hcd, dev->irq, IRQF_SHARED); if (retval) @@ -262,6 +311,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) + xhci_pme_acpi_rtd3_enable(dev); + /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ pm_runtime_put_noidle(&dev->dev); @@ -290,8 +342,6 @@ static void xhci_pci_remove(struct pci_dev *dev) /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) pci_set_power_state(dev, PCI_D3hot); - - kfree(xhci); } #ifdef CONFIG_PM @@ -308,7 +358,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) pdev->no_d3cold = true; if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(xhci); + xhci_pme_quirk(hcd, true); return xhci_suspend(xhci, do_wakeup); } @@ -341,7 +391,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) usb_enable_intel_xhci_ports(pdev); if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(xhci); + xhci_pme_quirk(hcd, false); retval = xhci_resume(xhci, hibernated); return retval; @@ -379,7 +429,7 @@ static struct pci_driver xhci_pci_driver = { static int __init xhci_pci_init(void) { - xhci_init_driver(&xhci_pci_hc_driver, xhci_pci_setup); + xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); #ifdef CONFIG_PM xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; xhci_pci_hc_driver.pci_resume = xhci_pci_resume; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 0e11d61408ff..890ad9d9d329 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/usb/phy.h> #include <linux/slab.h> #include <linux/usb/xhci_pdriver.h> @@ -25,6 +26,15 @@ static struct hc_driver __read_mostly xhci_plat_hc_driver; +static int xhci_plat_setup(struct usb_hcd *hcd); +static int xhci_plat_start(struct usb_hcd *hcd); + +static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { + .extra_priv_size = sizeof(struct xhci_hcd), + .reset = xhci_plat_setup, + .start = xhci_plat_start, +}; + static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) { /* @@ -126,47 +136,57 @@ static int xhci_plat_probe(struct platform_device *pdev) goto disable_clk; } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) - goto disable_clk; - device_wakeup_enable(hcd->self.controller); - /* USB 2.0 roothub is stored in the platform_device now. */ - hcd = platform_get_drvdata(pdev); xhci = hcd_to_xhci(hcd); xhci->clk = clk; + xhci->main_hcd = hcd; xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, dev_name(&pdev->dev), hcd); if (!xhci->shared_hcd) { ret = -ENOMEM; - goto dealloc_usb2_hcd; + goto disable_clk; } if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || (pdata && pdata->usb3_lpm_capable)) xhci->quirks |= XHCI_LPM_SUPPORT; - /* - * Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset) - * is called by usb_add_hcd(). - */ - *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; if (HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; + hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + if (IS_ERR(hcd->usb_phy)) { + ret = PTR_ERR(hcd->usb_phy); + if (ret == -EPROBE_DEFER) + goto put_usb3_hcd; + hcd->usb_phy = NULL; + } else { + ret = usb_phy_init(hcd->usb_phy); + if (ret) + goto put_usb3_hcd; + } + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto disable_usb_phy; + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) - goto put_usb3_hcd; + goto dealloc_usb2_hcd; return 0; -put_usb3_hcd: - usb_put_hcd(xhci->shared_hcd); dealloc_usb2_hcd: usb_remove_hcd(hcd); +disable_usb_phy: + usb_phy_shutdown(hcd->usb_phy); + +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); + disable_clk: if (!IS_ERR(clk)) clk_disable_unprepare(clk); @@ -184,13 +204,14 @@ static int xhci_plat_remove(struct platform_device *dev) struct clk *clk = xhci->clk; usb_remove_hcd(xhci->shared_hcd); - usb_put_hcd(xhci->shared_hcd); + usb_phy_shutdown(hcd->usb_phy); usb_remove_hcd(hcd); + usb_put_hcd(xhci->shared_hcd); + if (!IS_ERR(clk)) clk_disable_unprepare(clk); usb_put_hcd(hcd); - kfree(xhci); return 0; } @@ -254,8 +275,7 @@ MODULE_ALIAS("platform:xhci-hcd"); static int __init xhci_plat_init(void) { - xhci_init_driver(&xhci_plat_hc_driver, xhci_plat_setup); - xhci_plat_hc_driver.start = xhci_plat_start; + xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); return platform_driver_register(&usb_xhci_driver); } module_init(xhci_plat_init); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 73485fa4372f..32f4d564494a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -82,7 +82,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, return 0; /* offset in TRBs */ segment_offset = trb - seg->trbs; - if (segment_offset > TRBS_PER_SEGMENT) + if (segment_offset >= TRBS_PER_SEGMENT) return 0; return seg->dma + (segment_offset * sizeof(*trb)); } @@ -238,7 +238,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + ring->cycle_state ^= 1; } } ring->enq_seg = ring->enq_seg->next; @@ -1546,6 +1546,9 @@ static void handle_port_status(struct xhci_hcd *xhci, usb_hcd_resume_root_hub(hcd); } + if (hcd->speed == HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE) + bus_state->port_remote_wakeup &= ~(1 << faked_port_index); + if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) { xhci_dbg(xhci, "port resume event for port %d\n", port_id); @@ -1574,7 +1577,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } else { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + - msecs_to_jiffies(20); + msecs_to_jiffies(USB_RESUME_TIMEOUT); set_bit(faked_port_index, &bus_state->resuming_ports); mod_timer(&hcd->rh_timer, bus_state->resume_done[faked_port_index]); @@ -1934,7 +1937,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, td->urb->actual_length = td->urb->transfer_buffer_length - EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)); - else + else if (!td->urb_length_set) td->urb->actual_length = 0; return finish_td(xhci, td, event_trb, event, ep, status, false); @@ -2026,8 +2029,13 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, break; case COMP_DEV_ERR: case COMP_STALL: + frame->status = -EPROTO; + skip_td = true; + break; case COMP_TX_ERR: frame->status = -EPROTO; + if (event_trb != td->last_trb) + return 0; skip_td = true; break; case COMP_STOP: @@ -2640,7 +2648,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) xhci_halt(xhci); hw_died: spin_unlock(&xhci->lock); - return -ESHUTDOWN; + return IRQ_HANDLED; } /* @@ -2809,7 +2817,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + ring->cycle_state ^= 1; } ring->enq_seg = ring->enq_seg->next; ring->enqueue = ring->enq_seg->trbs; @@ -3776,8 +3784,11 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, { int reserved_trbs = xhci->cmd_ring_reserved_trbs; int ret; - if (xhci->xhc_state & XHCI_STATE_DYING) + + if (xhci->xhc_state) { + xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); return -ESHUTDOWN; + } if (!command_must_succeed) reserved_trbs++; diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index dde3959b7a33..59c05653b2ea 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -14,6 +14,13 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM xhci-hcd +/* + * The TRACE_SYSTEM_VAR defaults to TRACE_SYSTEM, but must be a + * legitimate C variable. It is not exported to user space. + */ +#undef TRACE_SYSTEM_VAR +#define TRACE_SYSTEM_VAR xhci_hcd + #if !defined(__XHCI_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) #define __XHCI_TRACE_H diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ec8ac1674854..526ebc0c7e72 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -660,12 +660,6 @@ static void xhci_only_stop_hcd(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); - - /* The shared_hcd is going to be deallocated shortly (the USB core only - * calls this function when allocation fails in usb_add_hcd(), or - * usb_remove_hcd() is called). So we need to unset xHCI's pointer. - */ - xhci->shared_hcd = NULL; spin_unlock_irq(&xhci->lock); } @@ -897,6 +891,9 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; + if (!hcd->state) + return 0; + if (hcd->state != HC_STATE_SUSPENDED || xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; @@ -983,6 +980,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) int retval = 0; bool comp_timer_running = false; + if (!hcd->state) + return 0; + /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. */ @@ -3453,6 +3453,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) return -EINVAL; } + if (virt_dev->tt_info) + old_active_eps = virt_dev->tt_info->active_eps; + if (virt_dev->udev != udev) { /* If the virt_dev and the udev does not match, this virt_dev * may belong to another udev. @@ -3682,18 +3685,21 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); unsigned long flags; - int ret; + int ret, slot_id; struct xhci_command *command; command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); if (!command) return 0; + /* xhci->slot_id and xhci->addr_dev are not thread-safe */ + mutex_lock(&xhci->mutex); spin_lock_irqsave(&xhci->lock, flags); command->completion = &xhci->addr_dev; ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); + mutex_unlock(&xhci->mutex); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); kfree(command); return 0; @@ -3702,8 +3708,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) spin_unlock_irqrestore(&xhci->lock, flags); wait_for_completion(command->completion); + slot_id = xhci->slot_id; + mutex_unlock(&xhci->mutex); - if (!xhci->slot_id || command->status != COMP_SUCCESS) { + if (!slot_id || command->status != COMP_SUCCESS) { xhci_err(xhci, "Error while assigning device slot ID\n"); xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", HCS_MAX_SLOTS( @@ -3728,11 +3736,11 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) * xhci_discover_or_reset_device(), which may be called as part of * mass storage driver error handling. */ - if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { + if (!xhci_alloc_virt_device(xhci, slot_id, udev, GFP_NOIO)) { xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); goto disable_slot; } - udev->slot_id = xhci->slot_id; + udev->slot_id = slot_id; #ifndef CONFIG_USB_DEFAULT_PERSIST /* @@ -3764,8 +3772,6 @@ disable_slot: /* * Issue an Address Device command and optionally send a corresponding * SetAddress request to the device. - * We should be protected by the usb_address0_mutex in hub_wq's hub_port_init, - * so we should only issue and wait on one address command at the same time. */ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, enum xhci_setup_dev setup) @@ -3778,12 +3784,15 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u64 temp_64; - struct xhci_command *command; + struct xhci_command *command = NULL; + + mutex_lock(&xhci->mutex); if (!udev->slot_id) { xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Bad Slot ID %d", udev->slot_id); - return -EINVAL; + ret = -EINVAL; + goto out; } virt_dev = xhci->devs[udev->slot_id]; @@ -3796,7 +3805,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, */ xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n", udev->slot_id); - return -EINVAL; + ret = -EINVAL; + goto out; } if (setup == SETUP_CONTEXT_ONLY) { @@ -3804,13 +3814,15 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) == SLOT_STATE_DEFAULT) { xhci_dbg(xhci, "Slot already in default state\n"); - return 0; + goto out; } } command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); - if (!command) - return -ENOMEM; + if (!command) { + ret = -ENOMEM; + goto out; + } command->in_ctx = virt_dev->in_ctx; command->completion = &xhci->addr_dev; @@ -3820,8 +3832,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); - kfree(command); - return -EINVAL; + ret = -EINVAL; + goto out; } /* * If this is the first Set Address since device plug-in or @@ -3848,8 +3860,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "FIXME: allocate a command ring segment"); - kfree(command); - return ret; + goto out; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); @@ -3896,10 +3907,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, ret = -EINVAL; break; } - if (ret) { - kfree(command); - return ret; - } + if (ret) + goto out; temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Op regs DCBAA ptr = %#016llx", temp_64); @@ -3932,8 +3941,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Internal device address = %d", le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK); +out: + mutex_unlock(&xhci->mutex); kfree(command); - return 0; + return ret; } int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) @@ -4832,10 +4843,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) hcd->self.no_stop_on_short = 1; if (usb_hcd_is_primary_hcd(hcd)) { - xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); - if (!xhci) - return -ENOMEM; - *((struct xhci_hcd **) hcd->hcd_priv) = xhci; + xhci = hcd_to_xhci(hcd); xhci->main_hcd = hcd; /* Mark the first roothub as being USB 2.0. * The xHCI driver will register the USB 3.0 roothub. @@ -4855,6 +4863,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) return 0; } + mutex_init(&xhci->mutex); xhci->cap_regs = hcd->regs; xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); @@ -4883,13 +4892,13 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) - goto error; + return retval; xhci_dbg(xhci, "Resetting HCD\n"); /* Reset the internal HC memory state and registers. */ retval = xhci_reset(xhci); if (retval) - goto error; + return retval; xhci_dbg(xhci, "Reset complete\n"); /* Set dma_mask and coherent_dma_mask to 64-bits, @@ -4904,16 +4913,13 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) /* Initialize HCD and host controller data structures. */ retval = xhci_init(hcd); if (retval) - goto error; + return retval; xhci_dbg(xhci, "Called HCD init\n"); xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%08x\n", xhci->hcc_params, xhci->hci_version, xhci->quirks); return 0; -error: - kfree(xhci); - return retval; } EXPORT_SYMBOL_GPL(xhci_gen_setup); @@ -4978,11 +4984,21 @@ static const struct hc_driver xhci_hc_driver = { .find_raw_port_number = xhci_find_raw_port_number, }; -void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)) +void xhci_init_driver(struct hc_driver *drv, + const struct xhci_driver_overrides *over) { - BUG_ON(!setup_fn); + BUG_ON(!over); + + /* Copy the generic table to drv then apply the overrides */ *drv = xhci_hc_driver; - drv->reset = setup_fn; + + if (over) { + drv->hcd_priv_size += over->extra_priv_size; + if (over->reset) + drv->reset = over->reset; + if (over->start) + drv->start = over->start; + } } EXPORT_SYMBOL_GPL(xhci_init_driver); @@ -5011,4 +5027,12 @@ static int __init xhci_hcd_init(void) BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); return 0; } + +/* + * If an init function is provided, an exit function must also be provided + * to allow module unload. + */ +static void __exit xhci_hcd_fini(void) { } + module_init(xhci_hcd_init); +module_exit(xhci_hcd_fini); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8e421b89632d..ed2ebf647c38 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -285,6 +285,7 @@ struct xhci_op_regs { #define XDEV_U0 (0x0 << 5) #define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) +#define XDEV_INACTIVE (0x6 << 5) #define XDEV_RESUME (0xf << 5) /* true: port has power (see HCC_PPC) */ #define PORT_POWER (1 << 9) @@ -1267,7 +1268,7 @@ union xhci_trb { * since the command ring is 64-byte aligned. * It must also be greater than 16. */ -#define TRBS_PER_SEGMENT 64 +#define TRBS_PER_SEGMENT 256 /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) @@ -1497,6 +1498,8 @@ struct xhci_hcd { struct list_head lpm_failed_devs; /* slot enabling and address device helpers */ + /* these are not thread safe so use mutex */ + struct mutex mutex; struct completion addr_dev; int slot_id; /* For USB 3.0 LPM enable/disable. */ @@ -1591,10 +1594,24 @@ struct xhci_hcd { #define COMP_MODE_RCVRY_MSECS 2000 }; +/* Platform specific overrides to generic XHCI hc_driver ops */ +struct xhci_driver_overrides { + size_t extra_priv_size; + int (*reset)(struct usb_hcd *hcd); + int (*start)(struct usb_hcd *hcd); +}; + /* convert between an HCD pointer and the corresponding EHCI_HCD */ static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd) { - return *((struct xhci_hcd **) (hcd->hcd_priv)); + struct usb_hcd *primary_hcd; + + if (usb_hcd_is_primary_hcd(hcd)) + primary_hcd = hcd; + else + primary_hcd = hcd->primary_hcd; + + return (struct xhci_hcd *) (primary_hcd->hcd_priv); } static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) @@ -1748,7 +1765,8 @@ int xhci_run(struct usb_hcd *hcd); void xhci_stop(struct usb_hcd *hcd); void xhci_shutdown(struct usb_hcd *hcd); int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); -void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)); +void xhci_init_driver(struct hc_driver *drv, + const struct xhci_driver_overrides *over); #ifdef CONFIG_PM int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup); diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index a62865af53cc..5cf2633cdb04 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -347,7 +347,8 @@ static int mdc800_usb_waitForIRQ (int mode, int msec) { mdc800->camera_request_ready=1+mode; - wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken, msec*HZ/1000); + wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken, + msecs_to_jiffies(msec)); mdc800->irq_woken = 0; if (mdc800->camera_request_ready>0) @@ -743,8 +744,9 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l mutex_unlock(&mdc800->io_lock); return len-left; } - wait_event_timeout(mdc800->download_wait, mdc800->downloaded, - TO_DOWNLOAD_GET_READY*HZ/1000); + wait_event_timeout(mdc800->download_wait, + mdc800->downloaded, + msecs_to_jiffies(TO_DOWNLOAD_GET_READY)); mdc800->downloaded = 0; if (mdc800->download_urb->status != 0) { @@ -867,7 +869,8 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s mutex_unlock(&mdc800->io_lock); return -EIO; } - wait_event_timeout(mdc800->write_wait, mdc800->written, TO_WRITE_GET_READY*HZ/1000); + wait_event_timeout(mdc800->write_wait, mdc800->written, + msecs_to_jiffies(TO_WRITE_GET_READY)); mdc800->written = 0; if (mdc800->state == WORKING) { diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 6431d08c8d9d..a4dbb0cd80da 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -635,7 +635,6 @@ static struct scsi_host_template mts_scsi_host_template = { .sg_tablesize = SG_ALL, .can_queue = 1, .this_id = -1, - .cmd_per_lun = 1, .use_clustering = 1, .emulated = 1, .slave_alloc = mts_slave_alloc, diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c index 3cb98b1d5d29..ac31d19cc54b 100644 --- a/drivers/usb/isp1760/isp1760-hcd.c +++ b/drivers/usb/isp1760/isp1760-hcd.c @@ -1758,7 +1758,7 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv, int ports = HCS_N_PORTS(priv->hcs_params); u16 temp; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; /* priv 1.0, 2.3.9 says 20ms max */ desc->bPwrOn2PwrGood = 10; desc->bHubContrCurrent = 0; @@ -1869,7 +1869,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_RESUME); priv->reset_done = jiffies + - msecs_to_jiffies(20); + msecs_to_jiffies(USB_RESUME_TIMEOUT); } break; case USB_PORT_FEAT_C_SUSPEND: diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c index 3fc4fe770253..18ebf5b1f256 100644 --- a/drivers/usb/isp1760/isp1760-udc.c +++ b/drivers/usb/isp1760/isp1760-udc.c @@ -812,6 +812,8 @@ static struct usb_request *isp1760_ep_alloc_request(struct usb_ep *ep, struct isp1760_request *req; req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; return &req->req; } diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 76d77206e011..f7a7fc21be8a 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -255,3 +255,16 @@ config USB_LINK_LAYER_TEST This driver is for generating specific traffic for Super Speed Link Layer Test Device. Say Y only when you want to conduct USB Super Speed Link Layer Test for host controllers. + +config USB_CHAOSKEY + tristate "ChaosKey random number generator driver support" + depends on HW_RANDOM + help + Say Y here if you want to connect an AltusMetrum ChaosKey to + your computer's USB port. The ChaosKey is a hardware random + number generator which hooks into the kernel entropy pool to + ensure a large supply of entropy for /dev/random and + /dev/urandom and also provides direct access via /dev/chaoskeyX + + To compile this driver as a module, choose M here: the + module will be called chaoskey. diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 65b0402c1ca1..45fd4ac39d3e 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o obj-$(CONFIG_USB_YUREX) += yurex.o obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o +obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index b3d245ef46ef..a0a3827b4aff 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -329,7 +329,7 @@ error: pdata->urbdata, pdata->urb->transfer_dma); usb_free_urb(pdata->urb); } - if (pdata->bd && !IS_ERR(pdata->bd)) + if (!IS_ERR(pdata->bd)) backlight_device_unregister(pdata->bd); kfree(pdata->msgdata); } diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c new file mode 100644 index 000000000000..3ad5d19e4d04 --- /dev/null +++ b/drivers/usb/misc/chaoskey.c @@ -0,0 +1,532 @@ +/* + * chaoskey - driver for ChaosKey device from Altus Metrum. + * + * This device provides true random numbers using a noise source based + * on a reverse-biased p-n junction in avalanche breakdown. More + * details can be found at http://chaoskey.org + * + * The driver connects to the kernel hardware RNG interface to provide + * entropy for /dev/random and other kernel activities. It also offers + * a separate /dev/ entry to allow for direct access to the random + * bit stream. + * + * Copyright © 2015 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/wait.h> +#include <linux/hw_random.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +static struct usb_driver chaoskey_driver; +static struct usb_class_driver chaoskey_class; +static int chaoskey_rng_read(struct hwrng *rng, void *data, + size_t max, bool wait); + +#define usb_dbg(usb_if, format, arg...) \ + dev_dbg(&(usb_if)->dev, format, ## arg) + +#define usb_err(usb_if, format, arg...) \ + dev_err(&(usb_if)->dev, format, ## arg) + +/* Version Information */ +#define DRIVER_VERSION "v0.1" +#define DRIVER_AUTHOR "Keith Packard, keithp@keithp.com" +#define DRIVER_DESC "Altus Metrum ChaosKey driver" +#define DRIVER_SHORT "chaoskey" + +MODULE_VERSION(DRIVER_VERSION); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define CHAOSKEY_VENDOR_ID 0x1d50 /* OpenMoko */ +#define CHAOSKEY_PRODUCT_ID 0x60c6 /* ChaosKey */ + +#define CHAOSKEY_BUF_LEN 64 /* max size of USB full speed packet */ + +#define NAK_TIMEOUT (HZ) /* stall/wait timeout for device */ + +#ifdef CONFIG_USB_DYNAMIC_MINORS +#define USB_CHAOSKEY_MINOR_BASE 0 +#else + +/* IOWARRIOR_MINOR_BASE + 16, not official yet */ +#define USB_CHAOSKEY_MINOR_BASE 224 +#endif + +static const struct usb_device_id chaoskey_table[] = { + { USB_DEVICE(CHAOSKEY_VENDOR_ID, CHAOSKEY_PRODUCT_ID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, chaoskey_table); + +/* Driver-local specific stuff */ +struct chaoskey { + struct usb_interface *interface; + char in_ep; + struct mutex lock; + struct mutex rng_lock; + int open; /* open count */ + int present; /* device not disconnected */ + int size; /* size of buf */ + int valid; /* bytes of buf read */ + int used; /* bytes of buf consumed */ + char *name; /* product + serial */ + struct hwrng hwrng; /* Embedded struct for hwrng */ + int hwrng_registered; /* registered with hwrng API */ + wait_queue_head_t wait_q; /* for timeouts */ + char *buf; +}; + +static void chaoskey_free(struct chaoskey *dev) +{ + usb_dbg(dev->interface, "free"); + kfree(dev->name); + kfree(dev->buf); + kfree(dev); +} + +static int chaoskey_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *altsetting = interface->cur_altsetting; + int i; + int in_ep = -1; + struct chaoskey *dev; + int result; + int size; + + usb_dbg(interface, "probe %s-%s", udev->product, udev->serial); + + /* Find the first bulk IN endpoint and its packet size */ + for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { + if (usb_endpoint_is_bulk_in(&altsetting->endpoint[i].desc)) { + in_ep = usb_endpoint_num(&altsetting->endpoint[i].desc); + size = usb_endpoint_maxp(&altsetting->endpoint[i].desc); + break; + } + } + + /* Validate endpoint and size */ + if (in_ep == -1) { + usb_dbg(interface, "no IN endpoint found"); + return -ENODEV; + } + if (size <= 0) { + usb_dbg(interface, "invalid size (%d)", size); + return -ENODEV; + } + + if (size > CHAOSKEY_BUF_LEN) { + usb_dbg(interface, "size reduced from %d to %d\n", + size, CHAOSKEY_BUF_LEN); + size = CHAOSKEY_BUF_LEN; + } + + /* Looks good, allocate and initialize */ + + dev = kzalloc(sizeof(struct chaoskey), GFP_KERNEL); + + if (dev == NULL) + return -ENOMEM; + + dev->buf = kmalloc(size, GFP_KERNEL); + + if (dev->buf == NULL) { + kfree(dev); + return -ENOMEM; + } + + /* Construct a name using the product and serial values. Each + * device needs a unique name for the hwrng code + */ + + if (udev->product && udev->serial) { + dev->name = kmalloc(strlen(udev->product) + 1 + + strlen(udev->serial) + 1, GFP_KERNEL); + if (dev->name == NULL) { + kfree(dev->buf); + kfree(dev); + return -ENOMEM; + } + + strcpy(dev->name, udev->product); + strcat(dev->name, "-"); + strcat(dev->name, udev->serial); + } + + dev->interface = interface; + + dev->in_ep = in_ep; + + dev->size = size; + dev->present = 1; + + init_waitqueue_head(&dev->wait_q); + + mutex_init(&dev->lock); + mutex_init(&dev->rng_lock); + + usb_set_intfdata(interface, dev); + + result = usb_register_dev(interface, &chaoskey_class); + if (result) { + usb_err(interface, "Unable to allocate minor number."); + usb_set_intfdata(interface, NULL); + chaoskey_free(dev); + return result; + } + + dev->hwrng.name = dev->name ? dev->name : chaoskey_driver.name; + dev->hwrng.read = chaoskey_rng_read; + + /* Set the 'quality' metric. Quality is measured in units of + * 1/1024's of a bit ("mills"). This should be set to 1024, + * but there is a bug in the hwrng core which masks it with + * 1023. + * + * The patch that has been merged to the crypto development + * tree for that bug limits the value to 1024 at most, so by + * setting this to 1024 + 1023, we get 1023 before the fix is + * merged and 1024 afterwards. We'll patch this driver once + * both bits of code are in the same tree. + */ + dev->hwrng.quality = 1024 + 1023; + + dev->hwrng_registered = (hwrng_register(&dev->hwrng) == 0); + if (!dev->hwrng_registered) + usb_err(interface, "Unable to register with hwrng"); + + usb_enable_autosuspend(udev); + + usb_dbg(interface, "chaoskey probe success, size %d", dev->size); + return 0; +} + +static void chaoskey_disconnect(struct usb_interface *interface) +{ + struct chaoskey *dev; + + usb_dbg(interface, "disconnect"); + dev = usb_get_intfdata(interface); + if (!dev) { + usb_dbg(interface, "disconnect failed - no dev"); + return; + } + + if (dev->hwrng_registered) + hwrng_unregister(&dev->hwrng); + + usb_deregister_dev(interface, &chaoskey_class); + + usb_set_intfdata(interface, NULL); + mutex_lock(&dev->lock); + + dev->present = 0; + + if (!dev->open) { + mutex_unlock(&dev->lock); + chaoskey_free(dev); + } else + mutex_unlock(&dev->lock); + + usb_dbg(interface, "disconnect done"); +} + +static int chaoskey_open(struct inode *inode, struct file *file) +{ + struct chaoskey *dev; + struct usb_interface *interface; + + /* get the interface from minor number and driver information */ + interface = usb_find_interface(&chaoskey_driver, iminor(inode)); + if (!interface) + return -ENODEV; + + usb_dbg(interface, "open"); + + dev = usb_get_intfdata(interface); + if (!dev) { + usb_dbg(interface, "open (dev)"); + return -ENODEV; + } + + file->private_data = dev; + mutex_lock(&dev->lock); + ++dev->open; + mutex_unlock(&dev->lock); + + usb_dbg(interface, "open success"); + return 0; +} + +static int chaoskey_release(struct inode *inode, struct file *file) +{ + struct chaoskey *dev = file->private_data; + struct usb_interface *interface; + + if (dev == NULL) + return -ENODEV; + + interface = dev->interface; + + usb_dbg(interface, "release"); + + mutex_lock(&dev->lock); + + usb_dbg(interface, "open count at release is %d", dev->open); + + if (dev->open <= 0) { + usb_dbg(interface, "invalid open count (%d)", dev->open); + mutex_unlock(&dev->lock); + return -ENODEV; + } + + --dev->open; + + if (!dev->present) { + if (dev->open == 0) { + mutex_unlock(&dev->lock); + chaoskey_free(dev); + } else + mutex_unlock(&dev->lock); + } else + mutex_unlock(&dev->lock); + + usb_dbg(interface, "release success"); + return 0; +} + +/* Fill the buffer. Called with dev->lock held + */ +static int _chaoskey_fill(struct chaoskey *dev) +{ + DEFINE_WAIT(wait); + int result; + int this_read; + struct usb_device *udev = interface_to_usbdev(dev->interface); + + usb_dbg(dev->interface, "fill"); + + /* Return immediately if someone called before the buffer was + * empty */ + if (dev->valid != dev->used) { + usb_dbg(dev->interface, "not empty yet (valid %d used %d)", + dev->valid, dev->used); + return 0; + } + + /* Bail if the device has been removed */ + if (!dev->present) { + usb_dbg(dev->interface, "device not present"); + return -ENODEV; + } + + /* Make sure the device is awake */ + result = usb_autopm_get_interface(dev->interface); + if (result) { + usb_dbg(dev->interface, "wakeup failed (result %d)", result); + return result; + } + + result = usb_bulk_msg(udev, + usb_rcvbulkpipe(udev, dev->in_ep), + dev->buf, dev->size, &this_read, + NAK_TIMEOUT); + + /* Let the device go back to sleep eventually */ + usb_autopm_put_interface(dev->interface); + + if (result == 0) { + dev->valid = this_read; + dev->used = 0; + } + + usb_dbg(dev->interface, "bulk_msg result %d this_read %d", + result, this_read); + + return result; +} + +static ssize_t chaoskey_read(struct file *file, + char __user *buffer, + size_t count, + loff_t *ppos) +{ + struct chaoskey *dev; + ssize_t read_count = 0; + int this_time; + int result = 0; + unsigned long remain; + + dev = file->private_data; + + if (dev == NULL || !dev->present) + return -ENODEV; + + usb_dbg(dev->interface, "read %zu", count); + + while (count > 0) { + + /* Grab the rng_lock briefly to ensure that the hwrng interface + * gets priority over other user access + */ + result = mutex_lock_interruptible(&dev->rng_lock); + if (result) + goto bail; + mutex_unlock(&dev->rng_lock); + + result = mutex_lock_interruptible(&dev->lock); + if (result) + goto bail; + if (dev->valid == dev->used) { + result = _chaoskey_fill(dev); + if (result) { + mutex_unlock(&dev->lock); + goto bail; + } + + /* Read returned zero bytes */ + if (dev->used == dev->valid) { + mutex_unlock(&dev->lock); + goto bail; + } + } + + this_time = dev->valid - dev->used; + if (this_time > count) + this_time = count; + + remain = copy_to_user(buffer, dev->buf + dev->used, this_time); + if (remain) { + result = -EFAULT; + + /* Consume the bytes that were copied so we don't leak + * data to user space + */ + dev->used += this_time - remain; + mutex_unlock(&dev->lock); + goto bail; + } + + count -= this_time; + read_count += this_time; + buffer += this_time; + dev->used += this_time; + mutex_unlock(&dev->lock); + } +bail: + if (read_count) { + usb_dbg(dev->interface, "read %zu bytes", read_count); + return read_count; + } + usb_dbg(dev->interface, "empty read, result %d", result); + return result; +} + +static int chaoskey_rng_read(struct hwrng *rng, void *data, + size_t max, bool wait) +{ + struct chaoskey *dev = container_of(rng, struct chaoskey, hwrng); + int this_time; + + usb_dbg(dev->interface, "rng_read max %zu wait %d", max, wait); + + if (!dev->present) { + usb_dbg(dev->interface, "device not present"); + return 0; + } + + /* Hold the rng_lock until we acquire the device lock so that + * this operation gets priority over other user access to the + * device + */ + mutex_lock(&dev->rng_lock); + + mutex_lock(&dev->lock); + + mutex_unlock(&dev->rng_lock); + + /* Try to fill the buffer if empty. It doesn't actually matter + * if _chaoskey_fill works; we'll just return zero bytes as + * the buffer will still be empty + */ + if (dev->valid == dev->used) + (void) _chaoskey_fill(dev); + + this_time = dev->valid - dev->used; + if (this_time > max) + this_time = max; + + memcpy(data, dev->buf, this_time); + + dev->used += this_time; + + mutex_unlock(&dev->lock); + + usb_dbg(dev->interface, "rng_read this_time %d\n", this_time); + return this_time; +} + +#ifdef CONFIG_PM +static int chaoskey_suspend(struct usb_interface *interface, + pm_message_t message) +{ + usb_dbg(interface, "suspend"); + return 0; +} + +static int chaoskey_resume(struct usb_interface *interface) +{ + usb_dbg(interface, "resume"); + return 0; +} +#else +#define chaoskey_suspend NULL +#define chaoskey_resume NULL +#endif + +/* file operation pointers */ +static const struct file_operations chaoskey_fops = { + .owner = THIS_MODULE, + .read = chaoskey_read, + .open = chaoskey_open, + .release = chaoskey_release, + .llseek = default_llseek, +}; + +/* class driver information */ +static struct usb_class_driver chaoskey_class = { + .name = "chaoskey%d", + .fops = &chaoskey_fops, + .minor_base = USB_CHAOSKEY_MINOR_BASE, +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver chaoskey_driver = { + .name = DRIVER_SHORT, + .probe = chaoskey_probe, + .disconnect = chaoskey_disconnect, + .suspend = chaoskey_suspend, + .resume = chaoskey_resume, + .reset_resume = chaoskey_resume, + .id_table = chaoskey_table, + .supports_autosuspend = 1, +}; + +module_usb_driver(chaoskey_driver); + diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 82503a7ff6c8..cce22ff1c2eb 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -69,12 +69,6 @@ #define USB_DEVICE_ID_LD_HYBRID 0x2090 /* USB Product ID of Automotive Hybrid */ #define USB_DEVICE_ID_LD_HEATCONTROL 0x20A0 /* USB Product ID of Heat control */ -#define USB_VENDOR_ID_VERNIER 0x08f7 -#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 -#define USB_DEVICE_ID_VERNIER_SKIP 0x0003 -#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 -#define USB_DEVICE_ID_VERNIER_LCSPEC 0x0006 - #ifdef CONFIG_USB_DYNAMIC_MINORS #define USB_LD_MINOR_BASE 0 #else @@ -115,10 +109,6 @@ static const struct usb_device_id ld_usb_table[] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LCSPEC) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, ld_usb_table); diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 97cd9e24bd25..7771be3ac178 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -574,7 +574,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, } if (read_timeout) { - timeout = jiffies + read_timeout * HZ / 1000; + timeout = jiffies + msecs_to_jiffies(read_timeout); } /* wait for data */ @@ -592,7 +592,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, /* reset read timeout during read or write activity */ if (read_timeout && (dev->read_buffer_length || dev->interrupt_out_busy)) { - timeout = jiffies + read_timeout * HZ / 1000; + timeout = jiffies + msecs_to_jiffies(read_timeout); } /* check for read timeout */ if (read_timeout && time_after (jiffies, timeout)) { @@ -831,7 +831,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev->read_buffer_length = 0; dev->read_packet_length = 0; spin_lock_init (&dev->read_buffer_lock); - dev->packet_timeout_jiffies = packet_timeout * HZ / 1000; + dev->packet_timeout_jiffies = msecs_to_jiffies(packet_timeout); dev->read_last_arrival = jiffies; init_waitqueue_head (&dev->read_wait); diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c index 62cb8cd08403..86b4e4b2ab9a 100644 --- a/drivers/usb/misc/lvstest.c +++ b/drivers/usb/misc/lvstest.c @@ -4,7 +4,7 @@ * Test pattern generation for Link Layer Validation System Tests * * Copyright (C) 2014 ST Microelectronics - * Pratyush Anand <pratyush.anand@st.com> + * Pratyush Anand <pratyush.anand@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 022dc0008f2a..306d6852ebc7 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2316,10 +2316,12 @@ sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init) /* Set mode 0x03 */ SiSUSBSetMode(sisusb->SiS_Pr, 0x03); - if (!(myfont = find_font("VGA8x16"))) + myfont = find_font("VGA8x16"); + if (!myfont) return 1; - if (!(tempbuf = vmalloc(8192))) + tempbuf = vmalloc(8192); + if (!tempbuf) return 1; for (i = 0; i < 256; i++) @@ -2342,7 +2344,8 @@ sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init) if (init && !sisusb->scrbuf) { - if ((tempbuf = vmalloc(8192))) { + tempbuf = vmalloc(8192); + if (tempbuf) { i = 4096; tempbufb = (u16 *)tempbuf; @@ -2417,11 +2420,13 @@ sisusb_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor = iminor(inode); - if (!(interface = usb_find_interface(&sisusb_driver, subminor))) { + interface = usb_find_interface(&sisusb_driver, subminor); + if (!interface) { return -ENODEV; } - if (!(sisusb = usb_get_intfdata(interface))) { + sisusb = usb_get_intfdata(interface); + if (!sisusb) { return -ENODEV; } @@ -2488,7 +2493,8 @@ sisusb_release(struct inode *inode, struct file *file) { struct sisusb_usb_data *sisusb; - if (!(sisusb = file->private_data)) + sisusb = file->private_data; + if (!sisusb) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2520,7 +2526,8 @@ sisusb_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) u16 buf16; u32 buf32, address; - if (!(sisusb = file->private_data)) + sisusb = file->private_data; + if (!sisusb) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2662,7 +2669,8 @@ sisusb_write(struct file *file, const char __user *buffer, size_t count, u16 buf16; u32 buf32, address; - if (!(sisusb = file->private_data)) + sisusb = file->private_data; + if (!sisusb) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2805,7 +2813,8 @@ sisusb_lseek(struct file *file, loff_t offset, int orig) struct sisusb_usb_data *sisusb; loff_t ret; - if (!(sisusb = file->private_data)) + sisusb = file->private_data; + if (!sisusb) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2970,7 +2979,8 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) long retval = 0; u32 __user *argp = (u32 __user *)arg; - if (!(sisusb = file->private_data)) + sisusb = file->private_data; + if (!sisusb) return -ENODEV; mutex_lock(&sisusb->lock); @@ -3084,7 +3094,8 @@ static int sisusb_probe(struct usb_interface *intf, dev->devnum); /* Allocate memory for our private */ - if (!(sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL))) { + sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL); + if (!sisusb) { dev_err(&dev->dev, "Failed to allocate memory for private data\n"); return -ENOMEM; } @@ -3093,7 +3104,8 @@ static int sisusb_probe(struct usb_interface *intf, mutex_init(&(sisusb->lock)); /* Register device */ - if ((retval = usb_register_dev(intf, &usb_sisusb_class))) { + retval = usb_register_dev(intf, &usb_sisusb_class); + if (retval) { dev_err(&sisusb->sisusb_dev->dev, "Failed to get a minor for device %d\n", dev->devnum); retval = -ENODEV; @@ -3214,7 +3226,8 @@ static void sisusb_disconnect(struct usb_interface *intf) struct sisusb_usb_data *sisusb; /* This should *not* happen */ - if (!(sisusb = usb_get_intfdata(intf))) + sisusb = usb_get_intfdata(intf); + if (!sisusb) return; #ifdef INCL_SISUSB_CON diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c index a638c4e9a947..ace343088915 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -169,7 +169,8 @@ sisusb_get_sisusb_lock_and_check(unsigned short console) if (in_atomic()) return NULL; - if (!(sisusb = sisusb_get_sisusb(console))) + sisusb = sisusb_get_sisusb(console); + if (!sisusb) return NULL; mutex_lock(&sisusb->lock); @@ -214,7 +215,8 @@ sisusbcon_init(struct vc_data *c, int init) * are set up/restored. */ - if (!(sisusb = sisusb_get_sisusb(c->vc_num))) + sisusb = sisusb_get_sisusb(c->vc_num); + if (!sisusb) return; mutex_lock(&sisusb->lock); @@ -277,7 +279,8 @@ sisusbcon_deinit(struct vc_data *c) * and others, ie not under our control. */ - if (!(sisusb = sisusb_get_sisusb(c->vc_num))) + sisusb = sisusb_get_sisusb(c->vc_num); + if (!sisusb) return; mutex_lock(&sisusb->lock); @@ -369,7 +372,8 @@ sisusbcon_putc(struct vc_data *c, int ch, int y, int x) struct sisusb_usb_data *sisusb; ssize_t written; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return; /* sisusb->lock is down */ @@ -395,7 +399,8 @@ sisusbcon_putcs(struct vc_data *c, const unsigned short *s, u16 *dest; int i; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return; /* sisusb->lock is down */ @@ -433,7 +438,8 @@ sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width) if (width <= 0 || height <= 0) return; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return; /* sisusb->lock is down */ @@ -486,7 +492,8 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx, if (width <= 0 || height <= 0) return; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return; /* sisusb->lock is down */ @@ -520,7 +527,8 @@ sisusbcon_switch(struct vc_data *c) * Returnvalue != 0 naturally means the opposite. */ - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return 0; /* sisusb->lock is down */ @@ -569,7 +577,8 @@ sisusbcon_save_screen(struct vc_data *c) * buffer. */ - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return; /* sisusb->lock is down */ @@ -602,7 +611,8 @@ sisusbcon_set_palette(struct vc_data *c, unsigned char *table) if (!CON_IS_VISIBLE(c)) return -EINVAL; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return -EINVAL; /* sisusb->lock is down */ @@ -637,7 +647,8 @@ sisusbcon_blank(struct vc_data *c, int blank, int mode_switch) ssize_t written; int ret = 0; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return 0; /* sisusb->lock is down */ @@ -721,7 +732,8 @@ sisusbcon_scrolldelta(struct vc_data *c, int lines) /* The return value does not seem to be used */ - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return 0; /* sisusb->lock is down */ @@ -779,7 +791,8 @@ sisusbcon_cursor(struct vc_data *c, int mode) struct sisusb_usb_data *sisusb; int from, to, baseline; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return; /* sisusb->lock is down */ @@ -906,7 +919,8 @@ sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines) if (!lines) return 1; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return 0; /* sisusb->lock is down */ @@ -1018,7 +1032,8 @@ sisusbcon_set_origin(struct vc_data *c) * screenbuffer as the origin. */ - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return 0; /* sisusb->lock is down */ @@ -1047,7 +1062,8 @@ sisusbcon_resize(struct vc_data *c, unsigned int newcols, unsigned int newrows, struct sisusb_usb_data *sisusb; int fh; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return -ENODEV; fh = sisusb->current_font_height; @@ -1286,7 +1302,8 @@ sisusbcon_font_set(struct vc_data *c, struct console_font *font, if (font->width != 8 || (charcount != 256 && charcount != 512)) return -EINVAL; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return -ENODEV; /* sisusb->lock is down */ @@ -1326,7 +1343,8 @@ sisusbcon_font_get(struct vc_data *c, struct console_font *font) { struct sisusb_usb_data *sisusb; - if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); + if (!sisusb) return -ENODEV; /* sisusb->lock is down */ diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 258d2f546e43..64ff5b91752d 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -186,8 +186,31 @@ static int usb3503_probe(struct usb3503 *hub) hub->mode = pdata->initial_mode; } else if (np) { struct clk *clk; + u32 rate = 0; hub->port_off_mask = 0; + if (!of_property_read_u32(np, "refclk-frequency", &rate)) { + switch (rate) { + case 38400000: + case 26000000: + case 19200000: + case 12000000: + hub->secondary_ref_clk = 0; + break; + case 24000000: + case 27000000: + case 25000000: + case 50000000: + hub->secondary_ref_clk = 1; + break; + default: + dev_err(dev, + "unsupported reference clock rate (%d)\n", + (int) rate); + return -EINVAL; + } + } + clk = devm_clk_get(dev, "refclk"); if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) { dev_err(dev, "unable to request refclk (%ld)\n", @@ -196,31 +219,9 @@ static int usb3503_probe(struct usb3503 *hub) } if (!IS_ERR(clk)) { - u32 rate = 0; hub->clk = clk; - if (!of_property_read_u32(np, "refclk-frequency", - &rate)) { - - switch (rate) { - case 38400000: - case 26000000: - case 19200000: - case 12000000: - hub->secondary_ref_clk = 0; - break; - case 24000000: - case 27000000: - case 25000000: - case 50000000: - hub->secondary_ref_clk = 1; - break; - default: - dev_err(dev, - "unsupported reference clock rate (%d)\n", - (int) rate); - return -EINVAL; - } + if (rate != 0) { err = clk_set_rate(hub->clk, rate); if (err) { dev_err(dev, diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 588d62a73e1a..bbd029c9c725 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -714,7 +714,8 @@ static int uss720_probe(struct usb_interface *intf, /* * Allocate parport interface */ - if (!(priv = kzalloc(sizeof(struct parport_uss720_private), GFP_KERNEL))) { + priv = kzalloc(sizeof(struct parport_uss720_private), GFP_KERNEL); + if (!priv) { usb_put_dev(usbdev); return -ENOMEM; } @@ -723,7 +724,8 @@ static int uss720_probe(struct usb_interface *intf, kref_init(&priv->ref_count); spin_lock_init(&priv->asynclock); INIT_LIST_HEAD(&priv->asynclist); - if (!(pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_uss720_ops))) { + pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_uss720_ops); + if (!pp) { printk(KERN_WARNING "uss720: could not register parport\n"); goto probe_abort; } diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 9a62e89d6dc0..3598f1a62673 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -675,7 +675,8 @@ static int mon_bin_open(struct inode *inode, struct file *file) int rc; mutex_lock(&mon_lock); - if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) { + mbus = mon_bus_lookup(iminor(inode)); + if (mbus == NULL) { mutex_unlock(&mon_lock); return -ENODEV; } @@ -1018,8 +1019,8 @@ static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg return -EINVAL; size = CHUNK_ALIGN(arg); - if ((vec = kzalloc(sizeof(struct mon_pgmap) * (size/CHUNK_SIZE), - GFP_KERNEL)) == NULL) { + vec = kzalloc(sizeof(struct mon_pgmap) * (size / CHUNK_SIZE), GFP_KERNEL); + if (vec == NULL) { ret = -ENOMEM; break; } diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 10405119985c..f7c292f4891e 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -96,7 +96,8 @@ static void mon_submit(struct usb_bus *ubus, struct urb *urb) { struct mon_bus *mbus; - if ((mbus = ubus->mon_bus) != NULL) + mbus = ubus->mon_bus; + if (mbus != NULL) mon_bus_submit(mbus, urb); mon_bus_submit(&mon_bus0, urb); } @@ -122,7 +123,8 @@ static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error) { struct mon_bus *mbus; - if ((mbus = ubus->mon_bus) != NULL) + mbus = ubus->mon_bus; + if (mbus != NULL) mon_bus_submit_error(mbus, urb, error); mon_bus_submit_error(&mon_bus0, urb, error); } @@ -148,7 +150,8 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb, int status) { struct mon_bus *mbus; - if ((mbus = ubus->mon_bus) != NULL) + mbus = ubus->mon_bus; + if (mbus != NULL) mon_bus_complete(mbus, urb, status); mon_bus_complete(&mon_bus0, urb, status); } @@ -280,7 +283,8 @@ static void mon_bus_init(struct usb_bus *ubus) { struct mon_bus *mbus; - if ((mbus = kzalloc(sizeof(struct mon_bus), GFP_KERNEL)) == NULL) + mbus = kzalloc(sizeof(struct mon_bus), GFP_KERNEL); + if (mbus == NULL) goto err_alloc; kref_init(&mbus->ref); spin_lock_init(&mbus->lock); diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c index ebd6189a5014..5388a339cfb8 100644 --- a/drivers/usb/mon/mon_stat.c +++ b/drivers/usb/mon/mon_stat.c @@ -28,7 +28,8 @@ static int mon_stat_open(struct inode *inode, struct file *file) struct mon_bus *mbus; struct snap *sp; - if ((sp = kmalloc(sizeof(struct snap), GFP_KERNEL)) == NULL) + sp = kmalloc(sizeof(struct snap), GFP_KERNEL); + if (sp == NULL) return -ENOMEM; mbus = inode->i_private; diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 220fd4d3b41c..c41fe588d14d 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -438,11 +438,15 @@ static void am35x_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) } static const struct musb_platform_ops am35x_ops = { - .quirks = MUSB_INDEXED_EP, + .quirks = MUSB_DMA_INVENTRA | MUSB_INDEXED_EP, .init = am35x_musb_init, .exit = am35x_musb_exit, .read_fifo = am35x_read_fifo, +#ifdef CONFIG_USB_INVENTRA_DMA + .dma_init = musbhs_dma_controller_create, + .dma_exit = musbhs_dma_controller_destroy, +#endif .enable = am35x_musb_enable, .disable = am35x_musb_disable, @@ -565,7 +569,7 @@ static int am35x_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int am35x_suspend(struct device *dev) { struct am35x_glue *glue = dev_get_drvdata(dev); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 6123b748d262..310238c6b5cd 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -465,6 +465,7 @@ static int bfin_musb_exit(struct musb *musb) } static const struct musb_platform_ops bfin_ops = { + .quirks = MUSB_DMA_INVENTRA, .init = bfin_musb_init, .exit = bfin_musb_exit, @@ -477,6 +478,10 @@ static const struct musb_platform_ops bfin_ops = { .fifo_mode = 2, .read_fifo = bfin_read_fifo, .write_fifo = bfin_write_fifo, +#ifdef CONFIG_USB_INVENTRA_DMA + .dma_init = musbhs_dma_controller_create, + .dma_exit = musbhs_dma_controller_destroy, +#endif .enable = bfin_musb_enable, .disable = bfin_musb_disable, diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 904fb85d85a6..cc134109b056 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1297,7 +1297,8 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) EXPORT_SYMBOL_GPL(cppi_interrupt); /* Instantiate a software object representing a DMA controller. */ -struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *mregs) +struct dma_controller * +cppi_dma_controller_create(struct musb *musb, void __iomem *mregs) { struct cppi *controller; struct device *dev = musb->controller; @@ -1334,7 +1335,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *mr if (irq > 0) { if (request_irq(irq, cppi_interrupt, 0, "cppi-dma", musb)) { dev_err(dev, "request_irq %d failed!\n", irq); - dma_controller_destroy(&controller->controller); + musb_dma_controller_destroy(&controller->controller); return NULL; } controller->irq = irq; @@ -1343,11 +1344,12 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *mr cppi_controller_start(controller); return &controller->controller; } +EXPORT_SYMBOL_GPL(cppi_dma_controller_create); /* * Destroy a previously-instantiated DMA controller. */ -void dma_controller_destroy(struct dma_controller *c) +void cppi_dma_controller_destroy(struct dma_controller *c) { struct cppi *cppi; @@ -1363,6 +1365,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(cppi); } +EXPORT_SYMBOL_GPL(cppi_dma_controller_destroy); /* * Context: controller irqlocked, endpoint selected diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 9a9c82a4d35d..b03d3b867fca 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -458,11 +458,15 @@ static int da8xx_musb_exit(struct musb *musb) } static const struct musb_platform_ops da8xx_ops = { - .quirks = MUSB_INDEXED_EP, + .quirks = MUSB_DMA_CPPI | MUSB_INDEXED_EP, .init = da8xx_musb_init, .exit = da8xx_musb_exit, .fifo_mode = 2, +#ifdef CONFIG_USB_TI_CPPI_DMA + .dma_init = cppi_dma_controller_create, + .dma_exit = cppi_dma_controller_destroy, +#endif .enable = da8xx_musb_enable, .disable = da8xx_musb_disable, diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 3c1d9b211b51..cee61a51645e 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -284,7 +284,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) * mask, state, "vector", and EOI registers. */ cppi = container_of(musb->dma_controller, struct cppi, controller); - if (is_cppi_enabled() && musb->dma_controller && !cppi->irq) + if (is_cppi_enabled(musb) && musb->dma_controller && !cppi->irq) retval = cppi_interrupt(irq, __hci); /* ack and handle non-CPPI interrupts */ @@ -491,9 +491,14 @@ static int davinci_musb_exit(struct musb *musb) } static const struct musb_platform_ops davinci_ops = { + .quirks = MUSB_DMA_CPPI, .init = davinci_musb_init, .exit = davinci_musb_exit, +#ifdef CONFIG_USB_TI_CPPI_DMA + .dma_init = cppi_dma_controller_create, + .dma_exit = cppi_dma_controller_destroy, +#endif .enable = davinci_musb_enable, .disable = davinci_musb_disable, diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c index bb7b26325a74..5e5a8fa005f8 100644 --- a/drivers/usb/musb/jz4740.c +++ b/drivers/usb/musb/jz4740.c @@ -105,8 +105,12 @@ static int jz4740_musb_exit(struct musb *musb) return 0; } +/* + * DMA has not been confirmed to work with CONFIG_USB_INVENTRA_DMA, + * so let's not set up the dma function pointers yet. + */ static const struct musb_platform_ops jz4740_musb_ops = { - .quirks = MUSB_INDEXED_EP, + .quirks = MUSB_DMA_INVENTRA | MUSB_INDEXED_EP, .fifo_mode = 2, .init = jz4740_musb_init, .exit = jz4740_musb_exit, diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 067920f2d570..514a6cdaeff6 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -99,6 +99,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/usb.h> #include "musb_core.h" @@ -250,6 +251,11 @@ static u32 musb_indexed_ep_offset(u8 epnum, u16 offset) return 0x10 + offset; } +static u32 musb_default_busctl_offset(u8 epnum, u16 offset) +{ + return 0x80 + (0x08 * epnum) + offset; +} + static u8 musb_default_readb(const void __iomem *addr, unsigned offset) { return __raw_readb(addr + offset); @@ -308,7 +314,7 @@ static void musb_default_write_fifo(struct musb_hw_ep *hw_ep, u16 len, index += len & ~0x03; } if (len & 0x02) { - musb_writew(fifo, 0, *(u16 *)&src[index]); + __raw_writew(*(u16 *)&src[index], fifo); index += 2; } } else { @@ -318,7 +324,7 @@ static void musb_default_write_fifo(struct musb_hw_ep *hw_ep, u16 len, } } if (len & 0x01) - musb_writeb(fifo, 0, src[index]); + __raw_writeb(src[index], fifo); } else { /* byte aligned */ iowrite8_rep(fifo, src, len); @@ -350,7 +356,7 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) index = len & ~0x03; } if (len & 0x02) { - *(u16 *)&dst[index] = musb_readw(fifo, 0); + *(u16 *)&dst[index] = __raw_readw(fifo); index += 2; } } else { @@ -360,7 +366,7 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) } } if (len & 0x01) - dst[index] = musb_readb(fifo, 0); + dst[index] = __raw_readb(fifo); } else { /* byte aligned */ ioread8_rep(fifo, dst, len); @@ -388,6 +394,15 @@ EXPORT_SYMBOL_GPL(musb_readl); void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); EXPORT_SYMBOL_GPL(musb_writel); +#ifndef CONFIG_MUSB_PIO_ONLY +struct dma_controller * +(*musb_dma_controller_create)(struct musb *musb, void __iomem *base); +EXPORT_SYMBOL(musb_dma_controller_create); + +void (*musb_dma_controller_destroy)(struct dma_controller *c); +EXPORT_SYMBOL(musb_dma_controller_destroy); +#endif + /* * New style IO functions */ @@ -507,7 +522,8 @@ void musb_hnp_stop(struct musb *musb) musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16); } -static void musb_generic_disable(struct musb *musb); +static void musb_recover_from_babble(struct musb *musb); + /* * Interrupt Service Routine to record USB "global" interrupts. * Since these do not happen often and signify things of @@ -534,35 +550,21 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, */ if (int_usb & MUSB_INTR_RESUME) { handled = IRQ_HANDLED; - dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->otg->state)); + dev_dbg(musb->controller, "RESUME (%s)\n", + usb_otg_state_string(musb->xceiv->otg->state)); if (devctl & MUSB_DEVCTL_HM) { - void __iomem *mbase = musb->mregs; - u8 power; - switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: /* remote wakeup? later, GetPortStatus * will stop RESUME signaling */ - power = musb_readb(musb->mregs, MUSB_POWER); - if (power & MUSB_POWER_SUSPENDM) { - /* spurious */ - musb->int_usb &= ~MUSB_INTR_SUSPEND; - dev_dbg(musb->controller, "Spurious SUSPENDM\n"); - break; - } - - power &= ~MUSB_POWER_SUSPENDM; - musb_writeb(mbase, MUSB_POWER, - power | MUSB_POWER_RESUME); - musb->port1_status |= (USB_PORT_STAT_C_SUSPEND << 16) | MUSB_PORT_STAT_RESUME; musb->rh_timer = jiffies - + msecs_to_jiffies(20); + + msecs_to_jiffies(USB_RESUME_TIMEOUT); musb->need_finish_resume = 1; musb->xceiv->otg->state = OTG_STATE_A_HOST; @@ -775,10 +777,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb->ep0_stage = MUSB_EP0_START; - /* flush endpoints when transitioning from Device Mode */ - if (is_peripheral_active(musb)) { - /* REVISIT HNP; just force disconnect */ - } musb->intrtxe = musb->epmask; musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); musb->intrrxe = musb->epmask & 0xfffe; @@ -879,20 +877,19 @@ b_host: */ if (int_usb & MUSB_INTR_RESET) { handled = IRQ_HANDLED; - if ((devctl & MUSB_DEVCTL_HM) != 0) { + if (devctl & MUSB_DEVCTL_HM) { /* - * Looks like non-HS BABBLE can be ignored, but - * HS BABBLE is an error condition. For HS the solution - * is to avoid babble in the first place and fix what - * caused BABBLE. When HS BABBLE happens we can only - * stop the session. + * When BABBLE happens what we can depends on which + * platform MUSB is running, because some platforms + * implemented proprietary means for 'recovering' from + * Babble conditions. One such platform is AM335x. In + * most cases, however, the only thing we can do is + * drop the session. */ - if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV)) - dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl); - else { - ERR("Stopping host session -- babble\n"); - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - } + dev_err(musb->controller, "Babble\n"); + + if (is_host_active(musb)) + musb_recover_from_babble(musb); } else { dev_dbg(musb->controller, "BUS RESET as %s\n", usb_otg_state_string(musb->xceiv->otg->state)); @@ -931,13 +928,6 @@ b_host: } } - /* handle babble condition */ - if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb)) { - musb_generic_disable(musb); - schedule_delayed_work(&musb->recover_work, - msecs_to_jiffies(100)); - } - #if 0 /* REVISIT ... this would be for multiplexing periodic endpoints, or * supporting transfer phasing to prevent exceeding ISO bandwidth @@ -990,7 +980,7 @@ b_host: /*-------------------------------------------------------------------------*/ -static void musb_generic_disable(struct musb *musb) +static void musb_disable_interrupts(struct musb *musb) { void __iomem *mbase = musb->mregs; u16 temp; @@ -1002,16 +992,35 @@ static void musb_generic_disable(struct musb *musb) musb->intrrxe = 0; musb_writew(mbase, MUSB_INTRRXE, 0); - /* off */ - musb_writeb(mbase, MUSB_DEVCTL, 0); - /* flush pending interrupts */ temp = musb_readb(mbase, MUSB_INTRUSB); temp = musb_readw(mbase, MUSB_INTRTX); temp = musb_readw(mbase, MUSB_INTRRX); +} + +static void musb_enable_interrupts(struct musb *musb) +{ + void __iomem *regs = musb->mregs; + + /* Set INT enable registers, enable interrupts */ + musb->intrtxe = musb->epmask; + musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(regs, MUSB_INTRUSBE, 0xf7); } +static void musb_generic_disable(struct musb *musb) +{ + void __iomem *mbase = musb->mregs; + + musb_disable_interrupts(musb); + + /* off */ + musb_writeb(mbase, MUSB_DEVCTL, 0); +} + /* * Program the HDRC to start (enable interrupts, dma, etc.). */ @@ -1022,13 +1031,7 @@ void musb_start(struct musb *musb) dev_dbg(musb->controller, "<== devctl %02x\n", devctl); - /* Set INT enable registers, enable interrupts */ - musb->intrtxe = musb->epmask; - musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(regs, MUSB_INTRUSBE, 0xf7); - + musb_enable_interrupts(musb); musb_writeb(regs, MUSB_TESTMODE, 0); /* put into basic highspeed mode and start session */ @@ -1546,7 +1549,6 @@ static int musb_core_init(u16 musb_type, struct musb *musb) #endif hw_ep->regs = musb->io.ep_offset(i, 0) + mbase; - hw_ep->target_regs = musb_read_target_reg_base(i, mbase); hw_ep->rx_reinit = 1; hw_ep->tx_reinit = 1; @@ -1587,9 +1589,12 @@ static int musb_core_init(u16 musb_type, struct musb *musb) irqreturn_t musb_interrupt(struct musb *musb) { irqreturn_t retval = IRQ_NONE; + unsigned long status; + unsigned long epnum; u8 devctl; - int ep_num; - u32 reg; + + if (!musb->int_usb && !musb->int_tx && !musb->int_rx) + return IRQ_NONE; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); @@ -1597,56 +1602,57 @@ irqreturn_t musb_interrupt(struct musb *musb) is_host_active(musb) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); - /* the core can interrupt us for multiple reasons; docs have - * a generic interrupt flowchart to follow + /** + * According to Mentor Graphics' documentation, flowchart on page 98, + * IRQ should be handled as follows: + * + * . Resume IRQ + * . Session Request IRQ + * . VBUS Error IRQ + * . Suspend IRQ + * . Connect IRQ + * . Disconnect IRQ + * . Reset/Babble IRQ + * . SOF IRQ (we're not using this one) + * . Endpoint 0 IRQ + * . TX Endpoints + * . RX Endpoints + * + * We will be following that flowchart in order to avoid any problems + * that might arise with internal Finite State Machine. */ - if (musb->int_usb) - retval |= musb_stage0_irq(musb, musb->int_usb, - devctl); - /* "stage 1" is handling endpoint irqs */ + if (musb->int_usb) + retval |= musb_stage0_irq(musb, musb->int_usb, devctl); - /* handle endpoint 0 first */ if (musb->int_tx & 1) { if (is_host_active(musb)) retval |= musb_h_ep0_irq(musb); else retval |= musb_g_ep0_irq(musb); + + /* we have just handled endpoint 0 IRQ, clear it */ + musb->int_tx &= ~BIT(0); } - /* RX on endpoints 1-15 */ - reg = musb->int_rx >> 1; - ep_num = 1; - while (reg) { - if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval = ep->rx_irq(...) */ - retval = IRQ_HANDLED; - if (is_host_active(musb)) - musb_host_rx(musb, ep_num); - else - musb_g_rx(musb, ep_num); - } + status = musb->int_tx; - reg >>= 1; - ep_num++; + for_each_set_bit(epnum, &status, 16) { + retval = IRQ_HANDLED; + if (is_host_active(musb)) + musb_host_tx(musb, epnum); + else + musb_g_tx(musb, epnum); } - /* TX on endpoints 1-15 */ - reg = musb->int_tx >> 1; - ep_num = 1; - while (reg) { - if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval |= ep->tx_irq(...) */ - retval = IRQ_HANDLED; - if (is_host_active(musb)) - musb_host_tx(musb, ep_num); - else - musb_g_tx(musb, ep_num); - } - reg >>= 1; - ep_num++; + status = musb->int_rx; + + for_each_set_bit(epnum, &status, 16) { + retval = IRQ_HANDLED; + if (is_host_active(musb)) + musb_host_rx(musb, epnum); + else + musb_g_rx(musb, epnum); } return retval; @@ -1665,15 +1671,13 @@ void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) /* called with controller lock already held */ if (!epnum) { -#ifndef CONFIG_USB_TUSB_OMAP_DMA - if (!is_cppi_enabled()) { + if (!is_cppi_enabled(musb)) { /* endpoint 0 */ if (is_host_active(musb)) musb_h_ep0_irq(musb); else musb_g_ep0_irq(musb); } -#endif } else { /* endpoints 1..15 */ if (transmit) { @@ -1825,33 +1829,44 @@ static void musb_irq_work(struct work_struct *data) } } -/* Recover from babble interrupt conditions */ -static void musb_recover_work(struct work_struct *data) +static void musb_recover_from_babble(struct musb *musb) { - struct musb *musb = container_of(data, struct musb, recover_work.work); - int status, ret; + int ret; + u8 devctl; - ret = musb_platform_reset(musb); - if (ret) + musb_disable_interrupts(musb); + + /* + * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give + * it some slack and wait for 10us. + */ + udelay(10); + + ret = musb_platform_recover(musb); + if (ret) { + musb_enable_interrupts(musb); return; + } - usb_phy_vbus_off(musb->xceiv); - usleep_range(100, 200); + /* drop session bit */ + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - usb_phy_vbus_on(musb->xceiv); - usleep_range(100, 200); + /* tell usbcore about it */ + musb_root_disconnect(musb); /* * When a babble condition occurs, the musb controller * removes the session bit and the endpoint config is lost. */ if (musb->dyn_fifo) - status = ep_config_from_table(musb); + ret = ep_config_from_table(musb); else - status = ep_config_from_hw(musb); + ret = ep_config_from_hw(musb); - /* start the session again */ - if (status == 0) + /* restart session */ + if (ret == 0) musb_start(musb); } @@ -2017,13 +2032,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (musb->ops->quirks) musb->io.quirks = musb->ops->quirks; - /* At least tusb6010 has it's own offsets.. */ - if (musb->ops->ep_offset) - musb->io.ep_offset = musb->ops->ep_offset; - if (musb->ops->ep_select) - musb->io.ep_select = musb->ops->ep_select; - - /* ..and some devices use indexed offset or flat offset */ + /* Most devices use indexed offset or flat offset */ if (musb->io.quirks & MUSB_INDEXED_EP) { musb->io.ep_offset = musb_indexed_ep_offset; musb->io.ep_select = musb_indexed_ep_select; @@ -2031,6 +2040,17 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->io.ep_offset = musb_flat_ep_offset; musb->io.ep_select = musb_flat_ep_select; } + /* And override them with platform specific ops if specified. */ + if (musb->ops->ep_offset) + musb->io.ep_offset = musb->ops->ep_offset; + if (musb->ops->ep_select) + musb->io.ep_select = musb->ops->ep_select; + + /* At least tusb6010 has its own offsets */ + if (musb->ops->ep_offset) + musb->io.ep_offset = musb->ops->ep_offset; + if (musb->ops->ep_select) + musb->io.ep_select = musb->ops->ep_select; if (musb->ops->fifo_mode) fifo_mode = musb->ops->fifo_mode; @@ -2042,6 +2062,11 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) else musb->io.fifo_offset = musb_default_fifo_offset; + if (musb->ops->busctl_offset) + musb->io.busctl_offset = musb->ops->busctl_offset; + else + musb->io.busctl_offset = musb_default_busctl_offset; + if (musb->ops->readb) musb_readb = musb->ops->readb; if (musb->ops->writeb) @@ -2055,6 +2080,15 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (musb->ops->writel) musb_writel = musb->ops->writel; +#ifndef CONFIG_MUSB_PIO_ONLY + if (!musb->ops->dma_init || !musb->ops->dma_exit) { + dev_err(dev, "DMA controller not set\n"); + goto fail2; + } + musb_dma_controller_create = musb->ops->dma_init; + musb_dma_controller_destroy = musb->ops->dma_exit; +#endif + if (musb->ops->read_fifo) musb->io.read_fifo = musb->ops->read_fifo; else @@ -2074,7 +2108,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_get_sync(musb->controller); if (use_dma && dev->dma_mask) { - musb->dma_controller = dma_controller_create(musb, musb->mregs); + musb->dma_controller = + musb_dma_controller_create(musb, musb->mregs); if (IS_ERR(musb->dma_controller)) { status = PTR_ERR(musb->dma_controller); goto fail2_5; @@ -2087,7 +2122,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* Init IRQ workqueue before request_irq */ INIT_WORK(&musb->irq_work, musb_irq_work); - INIT_DELAYED_WORK(&musb->recover_work, musb_recover_work); INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset); INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume); @@ -2183,11 +2217,10 @@ fail4: fail3: cancel_work_sync(&musb->irq_work); - cancel_delayed_work_sync(&musb->recover_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); if (musb->dma_controller) - dma_controller_destroy(musb->dma_controller); + musb_dma_controller_destroy(musb->dma_controller); fail2_5: pm_runtime_put_sync(musb->controller); @@ -2246,10 +2279,9 @@ static int musb_remove(struct platform_device *pdev) musb_shutdown(pdev); if (musb->dma_controller) - dma_controller_destroy(musb->dma_controller); + musb_dma_controller_destroy(musb->dma_controller); cancel_work_sync(&musb->irq_work); - cancel_delayed_work_sync(&musb->recover_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); musb_free(musb); @@ -2315,18 +2347,18 @@ static void musb_save_context(struct musb *musb) musb_readb(epio, MUSB_RXINTERVAL); musb->context.index_regs[i].txfunaddr = - musb_read_txfunaddr(musb_base, i); + musb_read_txfunaddr(musb, i); musb->context.index_regs[i].txhubaddr = - musb_read_txhubaddr(musb_base, i); + musb_read_txhubaddr(musb, i); musb->context.index_regs[i].txhubport = - musb_read_txhubport(musb_base, i); + musb_read_txhubport(musb, i); musb->context.index_regs[i].rxfunaddr = - musb_read_rxfunaddr(musb_base, i); + musb_read_rxfunaddr(musb, i); musb->context.index_regs[i].rxhubaddr = - musb_read_rxhubaddr(musb_base, i); + musb_read_rxhubaddr(musb, i); musb->context.index_regs[i].rxhubport = - musb_read_rxhubport(musb_base, i); + musb_read_rxhubport(musb, i); } } @@ -2334,7 +2366,6 @@ static void musb_restore_context(struct musb *musb) { int i; void __iomem *musb_base = musb->mregs; - void __iomem *ep_target_regs; void __iomem *epio; u8 power; @@ -2395,21 +2426,18 @@ static void musb_restore_context(struct musb *musb) musb_writeb(epio, MUSB_RXINTERVAL, musb->context.index_regs[i].rxinterval); - musb_write_txfunaddr(musb_base, i, + musb_write_txfunaddr(musb, i, musb->context.index_regs[i].txfunaddr); - musb_write_txhubaddr(musb_base, i, + musb_write_txhubaddr(musb, i, musb->context.index_regs[i].txhubaddr); - musb_write_txhubport(musb_base, i, + musb_write_txhubport(musb, i, musb->context.index_regs[i].txhubport); - ep_target_regs = - musb_read_target_reg_base(i, musb_base); - - musb_write_rxfunaddr(ep_target_regs, + musb_write_rxfunaddr(musb, i, musb->context.index_regs[i].rxfunaddr); - musb_write_rxhubaddr(ep_target_regs, + musb_write_rxhubaddr(musb, i, musb->context.index_regs[i].rxhubaddr); - musb_write_rxhubport(ep_target_regs, + musb_write_rxhubport(musb, i, musb->context.index_regs[i].rxhubport); } musb_writeb(musb_base, MUSB_INDEX, musb->context.index); @@ -2463,7 +2491,7 @@ static int musb_resume(struct device *dev) if (musb->need_finish_resume) { musb->need_finish_resume = 0; schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(20)); + msecs_to_jiffies(USB_RESUME_TIMEOUT)); } /* @@ -2506,7 +2534,7 @@ static int musb_runtime_resume(struct device *dev) if (musb->need_finish_resume) { musb->need_finish_resume = 0; schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(20)); + msecs_to_jiffies(USB_RESUME_TIMEOUT)); } return 0; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 5e65958f7915..4b886d0f6bdf 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -67,7 +67,6 @@ struct musb_ep; #include "musb_dma.h" #include "musb_io.h" -#include "musb_regs.h" #include "musb_gadget.h" #include <linux/usb/hcd.h> @@ -157,13 +156,18 @@ struct musb_io; * @writel: write 32 bits * @read_fifo: reads the fifo * @write_fifo: writes to fifo + * @dma_init: platform specific dma init function + * @dma_exit: platform specific dma exit function * @init: turns on clocks, sets up platform-specific registers, etc * @exit: undoes @init * @set_mode: forcefully changes operating mode - * @try_ilde: tries to idle the IP + * @try_idle: tries to idle the IP + * @recover: platform-specific babble recovery * @vbus_status: returns vbus status if possible * @set_vbus: forces vbus status * @adjust_channel_params: pre check for standard dma channel_program func + * @pre_root_reset_end: called before the root usb port reset flag gets cleared + * @post_root_reset_end: called after the root usb port reset flag gets cleared */ struct musb_platform_ops { @@ -186,6 +190,7 @@ struct musb_platform_ops { void (*ep_select)(void __iomem *mbase, u8 epnum); u16 fifo_mode; u32 (*fifo_offset)(u8 epnum); + u32 (*busctl_offset)(u8 epnum, u16 offset); u8 (*readb)(const void __iomem *addr, unsigned offset); void (*writeb)(void __iomem *addr, unsigned offset, u8 data); u16 (*readw)(const void __iomem *addr, unsigned offset); @@ -194,9 +199,12 @@ struct musb_platform_ops { void (*writel)(void __iomem *addr, unsigned offset, u32 data); void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); + struct dma_controller * + (*dma_init) (struct musb *musb, void __iomem *base); + void (*dma_exit)(struct dma_controller *c); int (*set_mode)(struct musb *musb, u8 mode); void (*try_idle)(struct musb *musb, unsigned long timeout); - int (*reset)(struct musb *musb); + int (*recover)(struct musb *musb); int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); @@ -204,6 +212,8 @@ struct musb_platform_ops { int (*adjust_channel_params)(struct dma_channel *channel, u16 packet_sz, u8 *mode, dma_addr_t *dma_addr, u32 *len); + void (*pre_root_reset_end)(struct musb *musb); + void (*post_root_reset_end)(struct musb *musb); }; /* @@ -240,8 +250,6 @@ struct musb_hw_ep { void __iomem *fifo_sync_va; #endif - void __iomem *target_regs; - /* currently scheduled peripheral endpoint */ struct musb_qh *in_qh; struct musb_qh *out_qh; @@ -300,7 +308,6 @@ struct musb { irqreturn_t (*isr)(int, void *); struct work_struct irq_work; - struct delayed_work recover_work; struct delayed_work deassert_reset_work; struct delayed_work finish_resume_work; u16 hwvers; @@ -437,6 +444,9 @@ struct musb { #endif }; +/* This must be included after struct musb is defined */ +#include "musb_regs.h" + static inline struct musb *gadget_to_musb(struct usb_gadget *g) { return container_of(g, struct musb, g); @@ -558,12 +568,12 @@ static inline void musb_platform_try_idle(struct musb *musb, musb->ops->try_idle(musb, timeout); } -static inline int musb_platform_reset(struct musb *musb) +static inline int musb_platform_recover(struct musb *musb) { - if (!musb->ops->reset) - return -EINVAL; + if (!musb->ops->recover) + return 0; - return musb->ops->reset(musb); + return musb->ops->recover(musb); } static inline int musb_platform_get_vbus_status(struct musb *musb) @@ -590,4 +600,16 @@ static inline int musb_platform_exit(struct musb *musb) return musb->ops->exit(musb); } +static inline void musb_platform_pre_root_reset_end(struct musb *musb) +{ + if (musb->ops->pre_root_reset_end) + musb->ops->pre_root_reset_end(musb); +} + +static inline void musb_platform_post_root_reset_end(struct musb *musb) +{ + if (musb->ops->post_root_reset_end) + musb->ops->post_root_reset_end(musb); +} + #endif /* __MUSB_CORE_H__ */ diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index be84562d021b..4d1b44c232ee 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -225,10 +225,12 @@ static void cppi41_dma_callback(void *private_data) struct dma_channel *channel = private_data; struct cppi41_dma_channel *cppi41_channel = channel->private_data; struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + struct cppi41_dma_controller *controller; struct musb *musb = hw_ep->musb; unsigned long flags; struct dma_tx_state txstate; u32 transferred; + int is_hs = 0; bool empty; spin_lock_irqsave(&musb->lock, flags); @@ -248,61 +250,59 @@ static void cppi41_dma_callback(void *private_data) transferred < cppi41_channel->packet_sz) cppi41_channel->prog_len = 0; - empty = musb_is_tx_fifo_empty(hw_ep); - if (empty) { + if (cppi41_channel->is_tx) + empty = musb_is_tx_fifo_empty(hw_ep); + + if (!cppi41_channel->is_tx || empty) { cppi41_trans_done(cppi41_channel); - } else { - struct cppi41_dma_controller *controller; - int is_hs = 0; - /* - * On AM335x it has been observed that the TX interrupt fires - * too early that means the TXFIFO is not yet empty but the DMA - * engine says that it is done with the transfer. We don't - * receive a FIFO empty interrupt so the only thing we can do is - * to poll for the bit. On HS it usually takes 2us, on FS around - * 110us - 150us depending on the transfer size. - * We spin on HS (no longer than than 25us and setup a timer on - * FS to check for the bit and complete the transfer. - */ - controller = cppi41_channel->controller; + goto out; + } - if (is_host_active(musb)) { - if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED) - is_hs = 1; - } else { - if (musb->g.speed == USB_SPEED_HIGH) - is_hs = 1; - } - if (is_hs) { - unsigned wait = 25; - - do { - empty = musb_is_tx_fifo_empty(hw_ep); - if (empty) - break; - wait--; - if (!wait) - break; - udelay(1); - } while (1); + /* + * On AM335x it has been observed that the TX interrupt fires + * too early that means the TXFIFO is not yet empty but the DMA + * engine says that it is done with the transfer. We don't + * receive a FIFO empty interrupt so the only thing we can do is + * to poll for the bit. On HS it usually takes 2us, on FS around + * 110us - 150us depending on the transfer size. + * We spin on HS (no longer than than 25us and setup a timer on + * FS to check for the bit and complete the transfer. + */ + controller = cppi41_channel->controller; + + if (is_host_active(musb)) { + if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED) + is_hs = 1; + } else { + if (musb->g.speed == USB_SPEED_HIGH) + is_hs = 1; + } + if (is_hs) { + unsigned wait = 25; + do { empty = musb_is_tx_fifo_empty(hw_ep); if (empty) { cppi41_trans_done(cppi41_channel); goto out; } - } - list_add_tail(&cppi41_channel->tx_check, - &controller->early_tx_list); - if (!hrtimer_is_queued(&controller->early_tx)) { - unsigned long usecs = cppi41_channel->total_len / 10; + wait--; + if (!wait) + break; + cpu_relax(); + } while (1); + } + list_add_tail(&cppi41_channel->tx_check, + &controller->early_tx_list); + if (!hrtimer_is_queued(&controller->early_tx)) { + unsigned long usecs = cppi41_channel->total_len / 10; - hrtimer_start_range_ns(&controller->early_tx, + hrtimer_start_range_ns(&controller->early_tx, ktime_set(0, usecs * NSEC_PER_USEC), 20 * NSEC_PER_USEC, HRTIMER_MODE_REL); - } } + out: spin_unlock_irqrestore(&musb->lock, flags); } @@ -678,7 +678,7 @@ err: return ret; } -void dma_controller_destroy(struct dma_controller *c) +void cppi41_dma_controller_destroy(struct dma_controller *c) { struct cppi41_dma_controller *controller = container_of(c, struct cppi41_dma_controller, controller); @@ -687,9 +687,10 @@ void dma_controller_destroy(struct dma_controller *c) cppi41_dma_controller_stop(controller); kfree(controller); } +EXPORT_SYMBOL_GPL(cppi41_dma_controller_destroy); -struct dma_controller *dma_controller_create(struct musb *musb, - void __iomem *base) +struct dma_controller * +cppi41_dma_controller_create(struct musb *musb, void __iomem *base) { struct cppi41_dma_controller *controller; int ret = 0; @@ -726,3 +727,4 @@ kzalloc_fail: return ERR_PTR(ret); return NULL; } +EXPORT_SYMBOL_GPL(cppi41_dma_controller_create); diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 78a283e9ce40..9b22d946c089 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -191,9 +191,16 @@ static ssize_t musb_test_mode_write(struct file *file, { struct seq_file *s = file->private_data; struct musb *musb = s->private; - u8 test = 0; + u8 test; char buf[18]; + test = musb_readb(musb->mregs, MUSB_TESTMODE); + if (test) { + dev_err(musb->controller, "Error: test mode is already set. " + "Please do USB Bus Reset to start a new test.\n"); + return count; + } + memset(buf, 0x00, sizeof(buf)); if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) @@ -238,6 +245,90 @@ static const struct file_operations musb_test_mode_fops = { .release = single_release, }; +static int musb_softconnect_show(struct seq_file *s, void *unused) +{ + struct musb *musb = s->private; + u8 reg; + int connect; + + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_HOST: + case OTG_STATE_A_WAIT_BCON: + reg = musb_readb(musb->mregs, MUSB_DEVCTL); + connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0; + break; + default: + connect = -1; + } + + seq_printf(s, "%d\n", connect); + + return 0; +} + +static int musb_softconnect_open(struct inode *inode, struct file *file) +{ + return single_open(file, musb_softconnect_show, inode->i_private); +} + +static ssize_t musb_softconnect_write(struct file *file, + const char __user *ubuf, size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct musb *musb = s->private; + char buf[2]; + u8 reg; + + memset(buf, 0x00, sizeof(buf)); + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (!strncmp(buf, "0", 1)) { + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_HOST: + musb_root_disconnect(musb); + reg = musb_readb(musb->mregs, MUSB_DEVCTL); + reg &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, reg); + break; + default: + break; + } + } else if (!strncmp(buf, "1", 1)) { + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_WAIT_BCON: + /* + * musb_save_context() called in musb_runtime_suspend() + * might cache devctl with SESSION bit cleared during + * soft-disconnect, so specifically set SESSION bit + * here to preserve it for musb_runtime_resume(). + */ + musb->context.devctl |= MUSB_DEVCTL_SESSION; + reg = musb_readb(musb->mregs, MUSB_DEVCTL); + reg |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, reg); + break; + default: + break; + } + } + + return count; +} + +/* + * In host mode, connect/disconnect the bus without physically + * remove the devices. + */ +static const struct file_operations musb_softconnect_fops = { + .open = musb_softconnect_open, + .write = musb_softconnect_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + int musb_init_debugfs(struct musb *musb) { struct dentry *root; @@ -264,6 +355,13 @@ int musb_init_debugfs(struct musb *musb) goto err1; } + file = debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, + root, musb, &musb_softconnect_fops); + if (!file) { + ret = -ENOMEM; + goto err1; + } + musb->debugfs_root = root; return 0; diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 1d44faa86252..46357e183b4c 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -68,16 +68,41 @@ struct musb_hw_ep; #define is_dma_capable() (1) #endif -#if defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA) -#define is_cppi_enabled() 1 +#ifdef CONFIG_USB_UX500_DMA +#define musb_dma_ux500(musb) (musb->io.quirks & MUSB_DMA_UX500) +#else +#define musb_dma_ux500(musb) 0 +#endif + +#ifdef CONFIG_USB_TI_CPPI41_DMA +#define musb_dma_cppi41(musb) (musb->io.quirks & MUSB_DMA_CPPI41) +#else +#define musb_dma_cppi41(musb) 0 +#endif + +#ifdef CONFIG_USB_TI_CPPI_DMA +#define musb_dma_cppi(musb) (musb->io.quirks & MUSB_DMA_CPPI) #else -#define is_cppi_enabled() 0 +#define musb_dma_cppi(musb) 0 #endif #ifdef CONFIG_USB_TUSB_OMAP_DMA -#define tusb_dma_omap() 1 +#define tusb_dma_omap(musb) (musb->io.quirks & MUSB_DMA_TUSB_OMAP) +#else +#define tusb_dma_omap(musb) 0 +#endif + +#ifdef CONFIG_USB_INVENTRA_DMA +#define musb_dma_inventra(musb) (musb->io.quirks & MUSB_DMA_INVENTRA) #else -#define tusb_dma_omap() 0 +#define musb_dma_inventra(musb) 0 +#endif + +#if defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA) +#define is_cppi_enabled(musb) \ + (musb_dma_cppi(musb) || musb_dma_cppi41(musb)) +#else +#define is_cppi_enabled(musb) 0 #endif /* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1 @@ -177,19 +202,41 @@ struct dma_controller { extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit); #ifdef CONFIG_MUSB_PIO_ONLY -static inline struct dma_controller *dma_controller_create(struct musb *m, - void __iomem *io) +static inline struct dma_controller * +musb_dma_controller_create(struct musb *m, void __iomem *io) { return NULL; } -static inline void dma_controller_destroy(struct dma_controller *d) { } +static inline void musb_dma_controller_destroy(struct dma_controller *d) { } #else -extern struct dma_controller *dma_controller_create(struct musb *, void __iomem *); +extern struct dma_controller * +(*musb_dma_controller_create)(struct musb *, void __iomem *); -extern void dma_controller_destroy(struct dma_controller *); +extern void (*musb_dma_controller_destroy)(struct dma_controller *); #endif +/* Platform specific DMA functions */ +extern struct dma_controller * +musbhs_dma_controller_create(struct musb *musb, void __iomem *base); +extern void musbhs_dma_controller_destroy(struct dma_controller *c); + +extern struct dma_controller * +tusb_dma_controller_create(struct musb *musb, void __iomem *base); +extern void tusb_dma_controller_destroy(struct dma_controller *c); + +extern struct dma_controller * +cppi_dma_controller_create(struct musb *musb, void __iomem *base); +extern void cppi_dma_controller_destroy(struct dma_controller *c); + +extern struct dma_controller * +cppi41_dma_controller_create(struct musb *musb, void __iomem *base); +extern void cppi41_dma_controller_destroy(struct dma_controller *c); + +extern struct dma_controller * +ux500_dma_controller_create(struct musb *musb, void __iomem *base); +extern void ux500_dma_controller_destroy(struct dma_controller *c); + #endif /* __MUSB_DMA_H__ */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index a900c9877195..1334a3de31b8 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -119,7 +119,7 @@ struct dsps_musb_wrapper { unsigned iddig:5; unsigned iddig_mux:5; /* miscellaneous stuff */ - u8 poll_seconds; + unsigned poll_timeout; }; /* @@ -225,9 +225,8 @@ static void dsps_musb_enable(struct musb *musb) dsps_writel(reg_base, wrp->epintr_set, epmask); dsps_writel(reg_base, wrp->coreintr_set, coremask); - /* Force the DRVVBUS IRQ so we can start polling for ID change. */ - dsps_writel(reg_base, wrp->coreintr_set, - (1 << wrp->drvvbus) << wrp->usb_shift); + /* start polling for ID change. */ + mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout)); dsps_musb_try_idle(musb, 0); } @@ -285,7 +284,8 @@ static void otg_timer(unsigned long _musb) } if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); break; case OTG_STATE_A_WAIT_VFALL: musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; @@ -330,28 +330,6 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n", usbintr, epintr); - /* - * DRVVBUS IRQs are the only proxy we have (a very poor one!) for - * DSPS IP's missing ID change IRQ. We need an ID change IRQ to - * switch appropriately between halves of the OTG state machine. - * Managing DEVCTL.SESSION per Mentor docs requires that we know its - * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. - * Also, DRVVBUS pulses for SRP (but not at 5V) ... - */ - if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) { - pr_info("CAUTION: musb: Babble Interrupt Occurred\n"); - - /* - * When a babble condition occurs, the musb controller removes - * the session and is no longer in host mode. Hence, all - * devices connected to its root hub get disconnected. - * - * Hand this error down to the musb core isr, so it can - * recover. - */ - musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT; - musb->int_tx = musb->int_rx = 0; - } if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { int drvvbus = dsps_readl(reg_base, wrp->status); @@ -374,8 +352,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; - mod_timer(&glue->timer, - jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); @@ -404,7 +382,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) /* Poll for ID change in OTG port mode */ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); out: spin_unlock_irqrestore(&musb->lock, flags); @@ -453,7 +432,7 @@ static int dsps_musb_init(struct musb *musb) musb->ctrl_base = reg_base; /* NOP driver needs change if supporting dual instance */ - musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0); + musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0); if (IS_ERR(musb->xceiv)) return PTR_ERR(musb->xceiv); @@ -497,7 +476,7 @@ static int dsps_musb_init(struct musb *musb) * logic enabled. */ val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL); - if (val == MUSB_BABBLE_RCV_DISABLE) { + if (val & MUSB_BABBLE_RCV_DISABLE) { glue->sw_babble_enabled = true; val |= MUSB_BABBLE_SW_SESSION_CTRL; dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val); @@ -571,7 +550,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode) return 0; } -static bool sw_babble_control(struct musb *musb) +static bool dsps_sw_babble_control(struct musb *musb) { u8 babble_ctl; bool session_restart = false; @@ -622,50 +601,53 @@ static bool sw_babble_control(struct musb *musb) return session_restart; } -static int dsps_musb_reset(struct musb *musb) +static int dsps_musb_recover(struct musb *musb) { struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); - const struct dsps_musb_wrapper *wrp = glue->wrp; - int session_restart = 0, error; + int session_restart = 0; if (glue->sw_babble_enabled) - session_restart = sw_babble_control(musb); - /* - * In case of new silicon version babble condition can be recovered - * without resetting the MUSB. But for older silicon versions, MUSB - * reset is needed - */ - if (session_restart || !glue->sw_babble_enabled) { - dev_info(musb->controller, "Restarting MUSB to recover from Babble\n"); - dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset)); - usleep_range(100, 200); - usb_phy_shutdown(musb->xceiv); - error = phy_power_off(musb->phy); - if (error) - dev_err(dev, "phy shutdown failed: %i\n", error); - usleep_range(100, 200); - usb_phy_init(musb->xceiv); - error = phy_power_on(musb->phy); - if (error) - dev_err(dev, "phy powerup failed: %i\n", error); + session_restart = dsps_sw_babble_control(musb); + else session_restart = 1; + + return session_restart ? 0 : -EPIPE; +} + +/* Similar to am35x, dm81xx support only 32-bit read operation */ +static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) +{ + void __iomem *fifo = hw_ep->fifo; + + if (len >= 4) { + ioread32_rep(fifo, dst, len >> 2); + dst += len & ~0x03; + len &= 0x03; } - return !session_restart; + /* Read any remaining 1 to 3 bytes */ + if (len > 0) { + u32 val = musb_readl(fifo, 0); + memcpy(dst, &val, len); + } } static struct musb_platform_ops dsps_ops = { - .quirks = MUSB_INDEXED_EP, + .quirks = MUSB_DMA_CPPI41 | MUSB_INDEXED_EP, .init = dsps_musb_init, .exit = dsps_musb_exit, +#ifdef CONFIG_USB_TI_CPPI41_DMA + .dma_init = cppi41_dma_controller_create, + .dma_exit = cppi41_dma_controller_destroy, +#endif .enable = dsps_musb_enable, .disable = dsps_musb_disable, .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, - .reset = dsps_musb_reset, + .recover = dsps_musb_recover, }; static u64 musb_dmamask = DMA_BIT_MASK(32); @@ -737,7 +719,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; - musb->dev.of_node = of_node_get(dn); glue->musb = musb; @@ -802,6 +783,9 @@ static int dsps_probe(struct platform_device *pdev) } wrp = match->data; + if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816")) + dsps_ops.read_fifo = dsps_read_fifo32; + /* allocate glue */ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) @@ -873,12 +857,14 @@ static const struct dsps_musb_wrapper am33xx_driver_data = { .rxep_shift = 16, .rxep_mask = 0xfffe, .rxep_bitmap = (0xfffe << 16), - .poll_seconds = 2, + .poll_timeout = 2000, /* ms */ }; static const struct of_device_id musb_dsps_of_match[] = { { .compatible = "ti,musb-am33xx", - .data = (void *) &am33xx_driver_data, }, + .data = &am33xx_driver_data, }, + { .compatible = "ti,musb-dm816", + .data = &am33xx_driver_data, }, { }, }; MODULE_DEVICE_TABLE(of, musb_dsps_of_match); @@ -929,7 +915,8 @@ static int dsps_resume(struct device *dev) dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode); if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) - mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); return 0; } diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index b2d9040c7685..625d482f1a97 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -366,7 +366,7 @@ static void txstate(struct musb *musb, struct musb_request *req) } #endif - if (is_cppi_enabled()) { + if (is_cppi_enabled(musb)) { /* program endpoint CSR first, then setup DMA */ csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE | @@ -402,7 +402,7 @@ static void txstate(struct musb *musb, struct musb_request *req) musb_writew(epio, MUSB_TXCSR, csr); /* invariant: prequest->buf is non-null */ } - } else if (tusb_dma_omap()) + } else if (tusb_dma_omap(musb)) use_dma = use_dma && c->channel_program( musb_ep->dma, musb_ep->packet_sz, request->zero, @@ -489,6 +489,7 @@ void musb_g_tx(struct musb *musb, u8 epnum) if (request) { u8 is_dma = 0; + bool short_packet = false; if (dma && (csr & MUSB_TXCSR_DMAENAB)) { is_dma = 1; @@ -507,15 +508,18 @@ void musb_g_tx(struct musb *musb, u8 epnum) * First, maybe a terminating short packet. Some DMA * engines might handle this by themselves. */ - if ((request->zero && request->length + if ((request->zero && request->length) && (request->length % musb_ep->packet_sz == 0) && (request->actual == request->length)) -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) - || (is_dma && (!dma->desired_mode || + short_packet = true; + + if ((musb_dma_inventra(musb) || musb_dma_ux500(musb)) && + (is_dma && (!dma->desired_mode || (request->actual & - (musb_ep->packet_sz - 1)))) -#endif - ) { + (musb_ep->packet_sz - 1))))) + short_packet = true; + + if (short_packet) { /* * On DMA completion, FIFO may not be * available yet... @@ -595,7 +599,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) return; } - if (is_cppi_enabled() && is_buffer_mapped(req)) { + if (is_cppi_enabled(musb) && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; @@ -772,7 +776,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA - if (tusb_dma_omap() && is_buffer_mapped(req)) { + if (tusb_dma_omap(musb) && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; u32 dma_addr = request->dma + request->actual; @@ -1876,44 +1880,6 @@ err: return retval; } -static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver) -{ - int i; - struct musb_hw_ep *hw_ep; - - /* don't disconnect if it's not connected */ - if (musb->g.speed == USB_SPEED_UNKNOWN) - driver = NULL; - else - musb->g.speed = USB_SPEED_UNKNOWN; - - /* deactivate the hardware */ - if (musb->softconnect) { - musb->softconnect = 0; - musb_pullup(musb, 0); - } - musb_stop(musb); - - /* killing any outstanding requests will quiesce the driver; - * then report disconnect - */ - if (driver) { - for (i = 0, hw_ep = musb->endpoints; - i < musb->nr_endpoints; - i++, hw_ep++) { - musb_ep_select(musb->mregs, i); - if (hw_ep->is_shared_fifo /* || !epnum */) { - nuke(&hw_ep->ep_in, -ESHUTDOWN); - } else { - if (hw_ep->max_packet_sz_tx) - nuke(&hw_ep->ep_in, -ESHUTDOWN); - if (hw_ep->max_packet_sz_rx) - nuke(&hw_ep->ep_out, -ESHUTDOWN); - } - } - } -} - /* * Unregister the gadget driver. Used by gadget drivers when * unregistering themselves from the controller. @@ -1940,7 +1906,7 @@ static int musb_gadget_stop(struct usb_gadget *g) (void) musb_gadget_vbus_draw(&musb->g, 0); musb->xceiv->otg->state = OTG_STATE_UNDEFINED; - stop_activity(musb, NULL); + musb_stop(musb); otg_set_peripheral(musb->xceiv->otg, NULL); musb->is_active = 0; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index c3d5fc9dfb5b..26c65e66cc0f 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -181,7 +181,7 @@ static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep) /* NOTE: no locks here; caller should lock and select EP */ txcsr = musb_readw(ep->regs, MUSB_TXCSR); txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS; - if (is_cppi_enabled()) + if (is_cppi_enabled(ep->musb)) txcsr |= MUSB_TXCSR_DMAMODE; musb_writew(ep->regs, MUSB_TXCSR, txcsr); } @@ -294,7 +294,7 @@ start: if (!hw_ep->tx_channel) musb_h_tx_start(hw_ep); - else if (is_cppi_enabled() || tusb_dma_omap()) + else if (is_cppi_enabled(musb) || tusb_dma_omap(musb)) musb_h_tx_dma_start(hw_ep); } } @@ -555,8 +555,9 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err) * the busy/not-empty tests are basically paranoia. */ static void -musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) +musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) { + struct musb_hw_ep *ep = musb->endpoints + epnum; u16 csr; /* NOTE: we know the "rx" fifo reinit never triggers for ep0. @@ -594,10 +595,9 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) { - musb_write_rxfunaddr(ep->target_regs, qh->addr_reg); - musb_write_rxhubaddr(ep->target_regs, qh->h_addr_reg); - musb_write_rxhubport(ep->target_regs, qh->h_port_reg); - + musb_write_rxfunaddr(musb, epnum, qh->addr_reg); + musb_write_rxhubaddr(musb, epnum, qh->h_addr_reg); + musb_write_rxhubport(musb, epnum, qh->h_port_reg); } else musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg); @@ -617,23 +617,22 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) ep->rx_reinit = 0; } -static bool musb_tx_dma_program(struct dma_controller *dma, +static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma, struct musb_hw_ep *hw_ep, struct musb_qh *qh, - struct urb *urb, u32 offset, u32 length) + struct urb *urb, u32 offset, + u32 *length, u8 *mode) { struct dma_channel *channel = hw_ep->tx_channel; void __iomem *epio = hw_ep->regs; u16 pkt_size = qh->maxpacket; u16 csr; - u8 mode; -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) - if (length > channel->max_len) - length = channel->max_len; + if (*length > channel->max_len) + *length = channel->max_len; csr = musb_readw(epio, MUSB_TXCSR); - if (length > pkt_size) { - mode = 1; + if (*length > pkt_size) { + *mode = 1; csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB; /* autoset shouldn't be set in high bandwidth */ /* @@ -649,15 +648,28 @@ static bool musb_tx_dma_program(struct dma_controller *dma, can_bulk_split(hw_ep->musb, qh->type))) csr |= MUSB_TXCSR_AUTOSET; } else { - mode = 0; + *mode = 0; csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ } channel->desired_mode = mode; musb_writew(epio, MUSB_TXCSR, csr); -#else - if (!is_cppi_enabled() && !tusb_dma_omap()) - return false; + + return 0; +} + +static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + u32 offset, + u32 *length, + u8 *mode) +{ + struct dma_channel *channel = hw_ep->tx_channel; + + if (!is_cppi_enabled(hw_ep->musb) && !tusb_dma_omap(hw_ep->musb)) + return -ENODEV; channel->actual_len = 0; @@ -665,8 +677,28 @@ static bool musb_tx_dma_program(struct dma_controller *dma, * TX uses "RNDIS" mode automatically but needs help * to identify the zero-length-final-packet case. */ - mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; -#endif + *mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; + + return 0; +} + +static bool musb_tx_dma_program(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, struct musb_qh *qh, + struct urb *urb, u32 offset, u32 length) +{ + struct dma_channel *channel = hw_ep->tx_channel; + u16 pkt_size = qh->maxpacket; + u8 mode; + int res; + + if (musb_dma_inventra(hw_ep->musb) || musb_dma_ux500(hw_ep->musb)) + res = musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, + offset, &length, &mode); + else + res = musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, + offset, &length, &mode); + if (res) + return false; qh->segsize = length; @@ -678,6 +710,9 @@ static bool musb_tx_dma_program(struct dma_controller *dma, if (!dma->channel_program(channel, pkt_size, mode, urb->transfer_dma + offset, length)) { + void __iomem *epio = hw_ep->regs; + u16 csr; + dma->channel_release(channel); hw_ep->tx_channel = NULL; @@ -801,9 +836,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) { - musb_write_txfunaddr(mbase, epnum, qh->addr_reg); - musb_write_txhubaddr(mbase, epnum, qh->h_addr_reg); - musb_write_txhubport(mbase, epnum, qh->h_port_reg); + musb_write_txfunaddr(musb, epnum, qh->addr_reg); + musb_write_txhubaddr(musb, epnum, qh->h_addr_reg); + musb_write_txhubport(musb, epnum, qh->h_port_reg); /* FIXME if !epnum, do the same for RX ... */ } else musb_writeb(mbase, MUSB_FADDR, qh->addr_reg); @@ -875,7 +910,7 @@ finish: u16 csr; if (hw_ep->rx_reinit) { - musb_rx_reinit(musb, qh, hw_ep); + musb_rx_reinit(musb, qh, epnum); /* init new state: toggle and NYET, maybe DMA later */ if (usb_gettoggle(urb->dev, qh->epnum, 0)) @@ -901,7 +936,7 @@ finish: /* kick things off */ - if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { + if ((is_cppi_enabled(musb) || tusb_dma_omap(musb)) && dma_channel) { /* Candidate for DMA */ dma_channel->actual_len = 0L; qh->segsize = len; @@ -1441,7 +1476,7 @@ done: } else if ((usb_pipeisoc(pipe) || transfer_pending) && dma) { if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, offset, length)) { - if (is_cppi_enabled() || tusb_dma_omap()) + if (is_cppi_enabled(musb) || tusb_dma_omap(musb)) musb_h_tx_dma_start(hw_ep); return; } @@ -1498,9 +1533,47 @@ done: MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); } +#ifdef CONFIG_USB_TI_CPPI41_DMA +/* Seems to set up ISO for cppi41 and not advance len. See commit c57c41d */ +static int musb_rx_dma_iso_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len) +{ + struct dma_channel *channel = hw_ep->tx_channel; + void __iomem *epio = hw_ep->regs; + dma_addr_t *buf; + u32 length, res; + u16 val; -#ifdef CONFIG_USB_INVENTRA_DMA + buf = (void *)urb->iso_frame_desc[qh->iso_idx].offset + + (u32)urb->transfer_dma; + + length = urb->iso_frame_desc[qh->iso_idx].length; + val = musb_readw(epio, MUSB_RXCSR); + val |= MUSB_RXCSR_DMAENAB; + musb_writew(hw_ep->regs, MUSB_RXCSR, val); + + res = dma->channel_program(channel, qh->maxpacket, 0, + (u32)buf, length); + + return res; +} +#else +static inline int musb_rx_dma_iso_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len) +{ + return false; +} +#endif + +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ + defined(CONFIG_USB_TI_CPPI41_DMA) /* Host side RX (IN) using Mentor DMA works as follows: submit_urb -> - if queue was empty, ProgramEndpoint @@ -1535,7 +1608,194 @@ done: * thus be a great candidate for using mode 1 ... for all but the * last packet of one URB's transfer. */ +static int musb_rx_dma_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len) +{ + struct dma_channel *channel = hw_ep->rx_channel; + void __iomem *epio = hw_ep->regs; + u16 val; + int pipe; + bool done; + + pipe = urb->pipe; + + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != -EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) { + done = true; + } else { + /* REVISIT: Why ignore return value here? */ + if (musb_dma_cppi41(hw_ep->musb)) + done = musb_rx_dma_iso_cppi41(dma, hw_ep, qh, + urb, len); + done = false; + } + + } else { + /* done if urb buffer is full or short packet is recd */ + done = (urb->actual_length + len >= + urb->transfer_buffer_length + || channel->actual_len < qh->maxpacket + || channel->rx_packet_done); + } + + /* send IN token for next packet, without AUTOREQ */ + if (!done) { + val = musb_readw(epio, MUSB_RXCSR); + val |= MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | val); + } + + return done; +} + +/* Disadvantage of using mode 1: + * It's basically usable only for mass storage class; essentially all + * other protocols also terminate transfers on short packets. + * + * Details: + * An extra IN token is sent at the end of the transfer (due to AUTOREQ) + * If you try to use mode 1 for (transfer_buffer_length - 512), and try + * to use the extra IN token to grab the last packet using mode 0, then + * the problem is that you cannot be sure when the device will send the + * last packet and RxPktRdy set. Sometimes the packet is recd too soon + * such that it gets lost when RxCSR is re-set at the end of the mode 1 + * transfer, while sometimes it is recd just a little late so that if you + * try to configure for mode 0 soon after the mode 1 transfer is + * completed, you will find rxcount 0. Okay, so you might think why not + * wait for an interrupt when the pkt is recd. Well, you won't get any! + */ +static int musb_rx_dma_in_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len, + u8 iso_err) +{ + struct musb *musb = hw_ep->musb; + void __iomem *epio = hw_ep->regs; + struct dma_channel *channel = hw_ep->rx_channel; + u16 rx_count, val; + int length, pipe, done; + dma_addr_t buf; + + rx_count = musb_readw(epio, MUSB_RXCOUNT); + pipe = urb->pipe; + + if (usb_pipeisoc(pipe)) { + int d_status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + if (iso_err) { + d_status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (d_status == 0) { + d_status = -EOVERFLOW; + urb->error_count++; + } + dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = d_status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + urb->actual_length; + } + + channel->desired_mode = 0; +#ifdef USE_MODE1 + /* because of the issue below, mode 1 will + * only rarely behave with correct semantics. + */ + if ((urb->transfer_flags & URB_SHORT_NOT_OK) + && (urb->transfer_buffer_length - urb->actual_length) + > qh->maxpacket) + channel->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + channel->desired_mode = 0; + } else { + length = urb->transfer_buffer_length; + } +#endif + + /* See comments above on disadvantages of using mode 1 */ + val = musb_readw(epio, MUSB_RXCSR); + val &= ~MUSB_RXCSR_H_REQPKT; + + if (channel->desired_mode == 0) + val &= ~MUSB_RXCSR_H_AUTOREQ; + else + val |= MUSB_RXCSR_H_AUTOREQ; + val |= MUSB_RXCSR_DMAENAB; + + /* autoclear shouldn't be set in high bandwidth */ + if (qh->hb_mult == 1) + val |= MUSB_RXCSR_AUTOCLEAR; + + musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | val); + + /* REVISIT if when actual_length != 0, + * transfer_buffer_length needs to be + * adjusted first... + */ + done = dma->channel_program(channel, qh->maxpacket, + channel->desired_mode, + buf, length); + + if (!done) { + dma->channel_release(channel); + hw_ep->rx_channel = NULL; + channel = NULL; + val = musb_readw(epio, MUSB_RXCSR); + val &= ~(MUSB_RXCSR_DMAENAB + | MUSB_RXCSR_H_AUTOREQ + | MUSB_RXCSR_AUTOCLEAR); + musb_writew(epio, MUSB_RXCSR, val); + } + + return done; +} +#else +static inline int musb_rx_dma_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len) +{ + return false; +} + +static inline int musb_rx_dma_in_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len, + u8 iso_err) +{ + return false; +} #endif /* @@ -1546,6 +1806,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) { struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; + struct dma_controller *c = musb->dma_controller; void __iomem *epio = hw_ep->regs; struct musb_qh *qh = hw_ep->in_qh; size_t xfer_len; @@ -1661,9 +1922,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) */ /* FIXME this is _way_ too much in-line logic for Mentor DMA */ - -#if !defined(CONFIG_USB_INVENTRA_DMA) && !defined(CONFIG_USB_UX500_DMA) - if (rx_csr & MUSB_RXCSR_H_REQPKT) { + if (!musb_dma_inventra(musb) && !musb_dma_ux500(musb) && + (rx_csr & MUSB_RXCSR_H_REQPKT)) { /* REVISIT this happened for a while on some short reads... * the cleanup still needs investigation... looks bad... * and also duplicates dma cleanup code above ... plus, @@ -1684,7 +1944,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | rx_csr); } -#endif + if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) { xfer_len = dma->actual_len; @@ -1694,67 +1954,18 @@ void musb_host_rx(struct musb *musb, u8 epnum) | MUSB_RXCSR_RXPKTRDY); musb_writew(hw_ep->regs, MUSB_RXCSR, val); -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ - defined(CONFIG_USB_TI_CPPI41_DMA) - if (usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length = xfer_len; - - /* even if there was an error, we did the dma - * for iso_frame_desc->length - */ - if (d->status != -EILSEQ && d->status != -EOVERFLOW) - d->status = 0; - - if (++qh->iso_idx >= urb->number_of_packets) { - done = true; - } else { -#if defined(CONFIG_USB_TI_CPPI41_DMA) - struct dma_controller *c; - dma_addr_t *buf; - u32 length, ret; - - c = musb->dma_controller; - buf = (void *) - urb->iso_frame_desc[qh->iso_idx].offset - + (u32)urb->transfer_dma; - - length = - urb->iso_frame_desc[qh->iso_idx].length; - - val |= MUSB_RXCSR_DMAENAB; - musb_writew(hw_ep->regs, MUSB_RXCSR, val); - - ret = c->channel_program(dma, qh->maxpacket, - 0, (u32) buf, length); -#endif - done = false; - } - - } else { - /* done if urb buffer is full or short packet is recd */ - done = (urb->actual_length + xfer_len >= - urb->transfer_buffer_length - || dma->actual_len < qh->maxpacket - || dma->rx_packet_done); - } - - /* send IN token for next packet, without AUTOREQ */ - if (!done) { - val |= MUSB_RXCSR_H_REQPKT; - musb_writew(epio, MUSB_RXCSR, - MUSB_RXCSR_H_WZC_BITS | val); + if (musb_dma_inventra(musb) || musb_dma_ux500(musb) || + musb_dma_cppi41(musb)) { + done = musb_rx_dma_inventra_cppi41(c, hw_ep, qh, urb, xfer_len); + dev_dbg(hw_ep->musb->controller, + "ep %d dma %s, rxcsr %04x, rxcount %d\n", + epnum, done ? "off" : "reset", + musb_readw(epio, MUSB_RXCSR), + musb_readw(epio, MUSB_RXCOUNT)); + } else { + done = true; } - dev_dbg(musb->controller, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum, - done ? "off" : "reset", - musb_readw(epio, MUSB_RXCSR), - musb_readw(epio, MUSB_RXCOUNT)); -#else - done = true; -#endif } else if (urb->status == -EINPROGRESS) { /* if no errors, be sure a packet is ready for unloading */ if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) { @@ -1772,126 +1983,24 @@ void musb_host_rx(struct musb *musb, u8 epnum) } /* we are expecting IN packets */ -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ - defined(CONFIG_USB_TI_CPPI41_DMA) - if (dma) { - struct dma_controller *c; - u16 rx_count; - int ret, length; - dma_addr_t buf; - - rx_count = musb_readw(epio, MUSB_RXCOUNT); - - dev_dbg(musb->controller, "RX%d count %d, buffer 0x%llx len %d/%d\n", - epnum, rx_count, - (unsigned long long) urb->transfer_dma - + urb->actual_length, - qh->offset, - urb->transfer_buffer_length); - - c = musb->dma_controller; - - if (usb_pipeisoc(pipe)) { - int d_status = 0; - struct usb_iso_packet_descriptor *d; - - d = urb->iso_frame_desc + qh->iso_idx; - - if (iso_err) { - d_status = -EILSEQ; - urb->error_count++; - } - if (rx_count > d->length) { - if (d_status == 0) { - d_status = -EOVERFLOW; - urb->error_count++; - } - dev_dbg(musb->controller, "** OVERFLOW %d into %d\n",\ - rx_count, d->length); - - length = d->length; - } else - length = rx_count; - d->status = d_status; - buf = urb->transfer_dma + d->offset; - } else { - length = rx_count; - buf = urb->transfer_dma + - urb->actual_length; - } - - dma->desired_mode = 0; -#ifdef USE_MODE1 - /* because of the issue below, mode 1 will - * only rarely behave with correct semantics. - */ - if ((urb->transfer_flags & - URB_SHORT_NOT_OK) - && (urb->transfer_buffer_length - - urb->actual_length) - > qh->maxpacket) - dma->desired_mode = 1; - if (rx_count < hw_ep->max_packet_sz_rx) { - length = rx_count; - dma->desired_mode = 0; - } else { - length = urb->transfer_buffer_length; - } -#endif - -/* Disadvantage of using mode 1: - * It's basically usable only for mass storage class; essentially all - * other protocols also terminate transfers on short packets. - * - * Details: - * An extra IN token is sent at the end of the transfer (due to AUTOREQ) - * If you try to use mode 1 for (transfer_buffer_length - 512), and try - * to use the extra IN token to grab the last packet using mode 0, then - * the problem is that you cannot be sure when the device will send the - * last packet and RxPktRdy set. Sometimes the packet is recd too soon - * such that it gets lost when RxCSR is re-set at the end of the mode 1 - * transfer, while sometimes it is recd just a little late so that if you - * try to configure for mode 0 soon after the mode 1 transfer is - * completed, you will find rxcount 0. Okay, so you might think why not - * wait for an interrupt when the pkt is recd. Well, you won't get any! - */ - - val = musb_readw(epio, MUSB_RXCSR); - val &= ~MUSB_RXCSR_H_REQPKT; - - if (dma->desired_mode == 0) - val &= ~MUSB_RXCSR_H_AUTOREQ; + if ((musb_dma_inventra(musb) || musb_dma_ux500(musb) || + musb_dma_cppi41(musb)) && dma) { + dev_dbg(hw_ep->musb->controller, + "RX%d count %d, buffer 0x%llx len %d/%d\n", + epnum, musb_readw(epio, MUSB_RXCOUNT), + (unsigned long long) urb->transfer_dma + + urb->actual_length, + qh->offset, + urb->transfer_buffer_length); + + done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, + urb, xfer_len, + iso_err); + if (done) + goto finish; else - val |= MUSB_RXCSR_H_AUTOREQ; - val |= MUSB_RXCSR_DMAENAB; - - /* autoclear shouldn't be set in high bandwidth */ - if (qh->hb_mult == 1) - val |= MUSB_RXCSR_AUTOCLEAR; - - musb_writew(epio, MUSB_RXCSR, - MUSB_RXCSR_H_WZC_BITS | val); - - /* REVISIT if when actual_length != 0, - * transfer_buffer_length needs to be - * adjusted first... - */ - ret = c->channel_program( - dma, qh->maxpacket, - dma->desired_mode, buf, length); - - if (!ret) { - c->channel_release(dma); - hw_ep->rx_channel = NULL; - dma = NULL; - val = musb_readw(epio, MUSB_RXCSR); - val &= ~(MUSB_RXCSR_DMAENAB - | MUSB_RXCSR_H_AUTOREQ - | MUSB_RXCSR_AUTOCLEAR); - musb_writew(epio, MUSB_RXCSR, val); - } + dev_err(musb->controller, "error: rx_dma failed\n"); } -#endif /* Mentor DMA */ if (!dma) { unsigned int received_len; @@ -2512,6 +2621,7 @@ static void musb_free_temp_buffer(struct urb *urb) { enum dma_data_direction dir; struct musb_temp_buffer *temp; + size_t length; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; @@ -2522,8 +2632,12 @@ static void musb_free_temp_buffer(struct urb *urb) data); if (dir == DMA_FROM_DEVICE) { - memcpy(temp->old_xfer_buffer, temp->data, - urb->transfer_buffer_length); + if (usb_pipeisoc(urb->pipe)) + length = urb->transfer_buffer_length; + else + length = urb->actual_length; + + memcpy(temp->old_xfer_buffer, temp->data, length); } urb->transfer_buffer = temp->old_xfer_buffer; kfree(temp->kmalloc_ptr); diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index 8a57a6f4b3a6..17a80ae20674 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -47,6 +47,7 @@ * @fifo_offset: platform specific function to get fifo offset * @read_fifo: platform specific function to read fifo * @write_fifo: platform specific function to write fifo + * @busctl_offset: platform specific function to get busctl offset */ struct musb_io { u32 quirks; @@ -55,6 +56,7 @@ struct musb_io { u32 (*fifo_offset)(u8 epnum); void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); + u32 (*busctl_offset)(u8 epnum, u16 offset); }; /* Do not add new entries here, add them the struct musb_io instead */ diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 11f0be07491e..cff5bcf0d00f 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -300,9 +300,6 @@ #define MUSB_RXHUBADDR 0x06 #define MUSB_RXHUBPORT 0x07 -#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \ - (0x80 + (8*(_epnum)) + (_offset)) - static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) { musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); @@ -364,78 +361,84 @@ static inline u16 musb_read_hwvers(void __iomem *mbase) return musb_readw(mbase, MUSB_HWVERS); } -static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase) -{ - return (MUSB_BUSCTL_OFFSET(i, 0) + mbase); -} - -static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs, +static inline void musb_write_rxfunaddr(struct musb *musb, u8 epnum, u8 qh_addr_reg) { - musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg); + musb_writeb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR), + qh_addr_reg); } -static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs, +static inline void musb_write_rxhubaddr(struct musb *musb, u8 epnum, u8 qh_h_addr_reg) { - musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg); + musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBADDR), + qh_h_addr_reg); } -static inline void musb_write_rxhubport(void __iomem *ep_target_regs, +static inline void musb_write_rxhubport(struct musb *musb, u8 epnum, u8 qh_h_port_reg) { - musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg); + musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBPORT), + qh_h_port_reg); } -static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum, +static inline void musb_write_txfunaddr(struct musb *musb, u8 epnum, u8 qh_addr_reg) { - musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR), - qh_addr_reg); + musb_writeb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR), + qh_addr_reg); } -static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum, +static inline void musb_write_txhubaddr(struct musb *musb, u8 epnum, u8 qh_addr_reg) { - musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR), + musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBADDR), qh_addr_reg); } -static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, +static inline void musb_write_txhubport(struct musb *musb, u8 epnum, u8 qh_h_port_reg) { - musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT), + musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBPORT), qh_h_port_reg); } -static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_rxfunaddr(struct musb *musb, u8 epnum) { - return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR)); + return musb_readb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR)); } -static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_rxhubaddr(struct musb *musb, u8 epnum) { - return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR)); + return musb_readb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_RXHUBADDR)); } -static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_rxhubport(struct musb *musb, u8 epnum) { - return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT)); + return musb_readb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_RXHUBPORT)); } -static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_txfunaddr(struct musb *musb, u8 epnum) { - return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR)); + return musb_readb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR)); } -static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_txhubaddr(struct musb *musb, u8 epnum) { - return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR)); + return musb_readb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_TXHUBADDR)); } -static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum) { - return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT)); + return musb_readb(musb->mregs, + musb->io.busctl_offset(epnum, MUSB_TXHUBPORT)); } #else /* CONFIG_BLACKFIN */ @@ -556,22 +559,17 @@ static inline u16 musb_read_hwvers(void __iomem *mbase) return MUSB_HWVERS_1900; } -static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase) -{ - return NULL; -} - -static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs, +static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum, u8 qh_addr_req) { } -static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs, +static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum, u8 qh_h_addr_reg) { } -static inline void musb_write_rxhubport(void __iomem *ep_target_regs, +static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum, u8 qh_h_port_reg) { } diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 294e159f4afe..92d5f718659b 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -136,7 +136,7 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) /* later, GetPortStatus will stop RESUME signaling */ musb->port1_status |= MUSB_PORT_STAT_RESUME; schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(20)); + msecs_to_jiffies(USB_RESUME_TIMEOUT)); } } @@ -195,8 +195,10 @@ void musb_port_reset(struct musb *musb, bool do_reset) msecs_to_jiffies(50)); } else { dev_dbg(musb->controller, "root port reset stopped\n"); + musb_platform_pre_root_reset_end(musb); musb_writeb(mbase, MUSB_POWER, power & ~MUSB_POWER_RESET); + musb_platform_post_root_reset_end(musb); power = musb_readb(mbase, MUSB_POWER); if (power & MUSB_POWER_HSMODE) { @@ -273,9 +275,7 @@ static int musb_has_gadget(struct musb *musb) #ifdef CONFIG_USB_MUSB_HOST return 1; #else - if (musb->port_mode == MUSB_PORT_MODE_HOST) - return 1; - return musb->g.dev.driver != NULL; + return musb->port_mode == MUSB_PORT_MODE_HOST; #endif } @@ -345,7 +345,7 @@ int musb_hub_control( struct usb_hub_descriptor *desc = (void *)buf; desc->bDescLength = 9; - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bNbrPorts = 1; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */ diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index ab7ec09a8afe..7539c3188ffc 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -357,7 +357,7 @@ done: return retval; } -void dma_controller_destroy(struct dma_controller *c) +void musbhs_dma_controller_destroy(struct dma_controller *c) { struct musb_dma_controller *controller = container_of(c, struct musb_dma_controller, controller); @@ -369,8 +369,10 @@ void dma_controller_destroy(struct dma_controller *c) kfree(controller); } +EXPORT_SYMBOL_GPL(musbhs_dma_controller_destroy); -struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) +struct dma_controller *musbhs_dma_controller_create(struct musb *musb, + void __iomem *base) { struct musb_dma_controller *controller; struct device *dev = musb->controller; @@ -398,7 +400,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba if (request_irq(irq, dma_controller_irq, 0, dev_name(musb->controller), &controller->controller)) { dev_err(dev, "request_irq %d failed!\n", irq); - dma_controller_destroy(&controller->controller); + musb_dma_controller_destroy(&controller->controller); return NULL; } @@ -407,3 +409,4 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba return &controller->controller; } +EXPORT_SYMBOL_GPL(musbhs_dma_controller_create); diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index cc752d8c7773..70f2b8a2e6cf 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -493,6 +493,11 @@ static int omap2430_musb_exit(struct musb *musb) } static const struct musb_platform_ops omap2430_ops = { + .quirks = MUSB_DMA_INVENTRA, +#ifdef CONFIG_USB_INVENTRA_DMA + .dma_init = musbhs_dma_controller_create, + .dma_exit = musbhs_dma_controller_destroy, +#endif .init = omap2430_musb_init, .exit = omap2430_musb_exit, diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 3a5ffd575438..df7c9f46be54 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -890,7 +890,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci) dev_dbg(musb->controller, "DMA IRQ %08x\n", dma_src); real_dma_src = ~real_dma_src & dma_src; - if (tusb_dma_omap() && real_dma_src) { + if (tusb_dma_omap(musb) && real_dma_src) { int tx_source = (real_dma_src & 0xffff); int i; @@ -1181,7 +1181,7 @@ static int tusb_musb_exit(struct musb *musb) } static const struct musb_platform_ops tusb_ops = { - .quirks = MUSB_IN_TUSB, + .quirks = MUSB_DMA_TUSB_OMAP | MUSB_IN_TUSB, .init = tusb_musb_init, .exit = tusb_musb_exit, @@ -1192,6 +1192,10 @@ static const struct musb_platform_ops tusb_ops = { .writeb = tusb_writeb, .read_fifo = tusb_read_fifo, .write_fifo = tusb_write_fifo, +#ifdef CONFIG_USB_TUSB_OMAP_DMA + .dma_init = tusb_dma_controller_create, + .dma_exit = tusb_dma_controller_destroy, +#endif .enable = tusb_musb_enable, .disable = tusb_musb_disable, diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h index aec86c86ce32..72cdad23ced9 100644 --- a/drivers/usb/musb/tusb6010.h +++ b/drivers/usb/musb/tusb6010.h @@ -12,12 +12,6 @@ #ifndef __TUSB6010_H__ #define __TUSB6010_H__ -#ifdef CONFIG_USB_TUSB_OMAP_DMA -#define tusb_dma_omap() 1 -#else -#define tusb_dma_omap() 0 -#endif - /* VLYNQ control register. 32-bit at offset 0x000 */ #define TUSB_VLYNQ_CTRL 0x004 diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 3ce152c0408e..4c82077da475 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -625,7 +625,7 @@ static void tusb_omap_dma_release(struct dma_channel *channel) channel = NULL; } -void dma_controller_destroy(struct dma_controller *c) +void tusb_dma_controller_destroy(struct dma_controller *c) { struct tusb_omap_dma *tusb_dma; int i; @@ -644,8 +644,10 @@ void dma_controller_destroy(struct dma_controller *c) kfree(tusb_dma); } +EXPORT_SYMBOL_GPL(tusb_dma_controller_destroy); -struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) +struct dma_controller * +tusb_dma_controller_create(struct musb *musb, void __iomem *base) { void __iomem *tbase = musb->ctrl_base; struct tusb_omap_dma *tusb_dma; @@ -701,7 +703,8 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba return &tusb_dma->controller; cleanup: - dma_controller_destroy(&tusb_dma->controller); + musb_dma_controller_destroy(&tusb_dma->controller); out: return NULL; } +EXPORT_SYMBOL_GPL(tusb_dma_controller_create); diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index abf72728825f..39168fe9b406 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -188,7 +188,11 @@ static int ux500_musb_exit(struct musb *musb) } static const struct musb_platform_ops ux500_ops = { - .quirks = MUSB_INDEXED_EP, + .quirks = MUSB_DMA_UX500 | MUSB_INDEXED_EP, +#ifdef CONFIG_USB_UX500_DMA + .dma_init = ux500_dma_controller_create, + .dma_exit = ux500_dma_controller_destroy, +#endif .init = ux500_musb_init, .exit = ux500_musb_exit, .fifo_mode = 5, @@ -338,7 +342,7 @@ static int ux500_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ux500_suspend(struct device *dev) { struct ux500_glue *glue = dev_get_drvdata(dev); diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index e93845c26bdb..d0b6a1cd7f62 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -359,7 +359,7 @@ static int ux500_dma_controller_start(struct ux500_dma_controller *controller) return 0; } -void dma_controller_destroy(struct dma_controller *c) +void ux500_dma_controller_destroy(struct dma_controller *c) { struct ux500_dma_controller *controller = container_of(c, struct ux500_dma_controller, controller); @@ -367,9 +367,10 @@ void dma_controller_destroy(struct dma_controller *c) ux500_dma_controller_stop(controller); kfree(controller); } +EXPORT_SYMBOL_GPL(ux500_dma_controller_destroy); -struct dma_controller *dma_controller_create(struct musb *musb, - void __iomem *base) +struct dma_controller * +ux500_dma_controller_create(struct musb *musb, void __iomem *base) { struct ux500_dma_controller *controller; struct platform_device *pdev = to_platform_device(musb->controller); @@ -407,3 +408,4 @@ plat_get_fail: kzalloc_fail: return NULL; } +EXPORT_SYMBOL_GPL(ux500_dma_controller_create); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 52d3d58252e1..869c0cfcad98 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -91,7 +91,7 @@ config TWL6030_USB config USB_GPIO_VBUS tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST select USB_PHY help Provides simple GPIO VBUS sensing for controllers with an @@ -139,8 +139,9 @@ config USB_ISP1301 config USB_MSM_OTG tristate "Qualcomm on-chip USB OTG controller support" - depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST) + depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST) depends on RESET_CONTROLLER + depends on EXTCON select USB_PHY help Enable this to support the USB OTG transceiver on Qualcomm chips. It @@ -186,29 +187,16 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called phy-rcar-usb. -config USB_RCAR_GEN2_PHY - tristate "Renesas R-Car Gen2 USB PHY support" - depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST - select USB_PHY - help - Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver. - It is typically used to control internal USB PHY for USBHS, - and to configure shared USB channels 0 and 2. - This driver supports R8A7790 and R8A7791. - - To compile this driver as a module, choose M here: the - module will be called phy-rcar-gen2-usb. - config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM || ARM64 + select USB_ULPI_VIEWPORT help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. config USB_ULPI_VIEWPORT bool - depends on USB_ULPI help Provides read/write operations to the ULPI phy register set for controllers with a viewport register (e.g. Chipidea/ARC controllers). diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 75f2bba58c84..e36ab1d46d8b 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o -obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o obj-$(CONFIG_USB_ULPI) += phy-ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c index 7ea0154da9d5..66ffa82457a8 100644 --- a/drivers/usb/phy/of.c +++ b/drivers/usb/phy/of.c @@ -27,7 +27,7 @@ static const char *const usbphy_modes[] = { * @np: Pointer to the given device_node * * The function gets phy interface string from property 'phy_type', - * and returns the correspondig enum usb_phy_interface + * and returns the corresponding enum usb_phy_interface */ enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np) { diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 0b1bd2369293..0c912d3950a5 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -277,7 +277,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab) dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n", ret); - ret = regulator_set_optimum_mode(ab->v_ulpi, 28000); + ret = regulator_set_load(ab->v_ulpi, 28000); if (ret < 0) dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n", ret); @@ -317,7 +317,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab) ab->saved_v_ulpi, ret); } - ret = regulator_set_optimum_mode(ab->v_ulpi, 0); + ret = regulator_set_load(ab->v_ulpi, 0); if (ret < 0) dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n", ret); @@ -893,7 +893,7 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab) /* * Disconnection Sequence: - * 1. Disconect Interrupt + * 1. Disconnect Interrupt * 2. Disable regulators * 3. Disable AB clock * 4. Disable the Phy @@ -1179,7 +1179,7 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev, } err = devm_request_threaded_irq(&pdev->dev, irq, NULL, ab8500_usb_link_status_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, + IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, "usb-link-status", ab); if (err < 0) { dev_err(ab->dev, "request_irq failed for link status irq\n"); @@ -1195,7 +1195,7 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev, } err = devm_request_threaded_irq(&pdev->dev, irq, NULL, ab8500_usb_disconnect_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, + IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, "usb-id-fall", ab); if (err < 0) { dev_err(ab->dev, "request_irq failed for ID fall irq\n"); @@ -1211,7 +1211,7 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev, } err = devm_request_threaded_irq(&pdev->dev, irq, NULL, ab8500_usb_disconnect_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, + IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, "usb-vbus-fall", ab); if (err < 0) { dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); @@ -1504,7 +1504,7 @@ static int ab8500_usb_remove(struct platform_device *pdev) return 0; } -static struct platform_device_id ab8500_usb_devtype[] = { +static const struct platform_device_id ab8500_usb_devtype[] = { { .name = "ab8500-usb", }, { .name = "ab8540-usb", }, { .name = "ab9540-usb", }, diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 70be50b734b2..deee68eafb72 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -62,14 +62,14 @@ static int nop_set_suspend(struct usb_phy *x, int suspend) return 0; } -static void nop_reset_set(struct usb_phy_generic *nop, int asserted) +static void nop_reset(struct usb_phy_generic *nop) { if (!nop->gpiod_reset) return; - gpiod_direction_output(nop->gpiod_reset, !asserted); + gpiod_set_value(nop->gpiod_reset, 1); usleep_range(10000, 20000); - gpiod_set_value(nop->gpiod_reset, asserted); + gpiod_set_value(nop->gpiod_reset, 0); } /* interface to regulator framework */ @@ -151,8 +151,7 @@ int usb_gen_phy_init(struct usb_phy *phy) if (!IS_ERR(nop->clk)) clk_prepare_enable(nop->clk); - /* De-assert RESET */ - nop_reset_set(nop, 0); + nop_reset(nop); return 0; } @@ -162,8 +161,7 @@ void usb_gen_phy_shutdown(struct usb_phy *phy) { struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); - /* Assert RESET */ - nop_reset_set(nop, 1); + gpiod_set_value(nop->gpiod_reset, 1); if (!IS_ERR(nop->clk)) clk_disable_unprepare(nop->clk); diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c index 1e0e10dd6ba5..3af263cc0caa 100644 --- a/drivers/usb/phy/phy-isp1301-omap.c +++ b/drivers/usb/phy/phy-isp1301-omap.c @@ -94,7 +94,7 @@ struct isp1301 { #if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) -#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) +#if defined(CONFIG_TPS65010) || (defined(CONFIG_TPS65010_MODULE) && defined(MODULE)) #include <linux/i2c/tps65010.h> diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 000fd892455f..00c49bb1bd29 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -142,27 +142,22 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) int ret = 0; if (on) { - ret = regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_HPM_LOAD); + ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD); if (ret < 0) { pr_err("Could not set HPM for v1p8\n"); return ret; } - ret = regulator_set_optimum_mode(motg->v3p3, - USB_PHY_3P3_HPM_LOAD); + ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD); if (ret < 0) { pr_err("Could not set HPM for v3p3\n"); - regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_LPM_LOAD); + regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD); return ret; } } else { - ret = regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_LPM_LOAD); + ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD); if (ret < 0) pr_err("Could not set LPM for v1p8\n"); - ret = regulator_set_optimum_mode(motg->v3p3, - USB_PHY_3P3_LPM_LOAD); + ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD); if (ret < 0) pr_err("Could not set LPM for v3p3\n"); } @@ -245,8 +240,14 @@ static void ulpi_init(struct msm_otg *motg) static int msm_phy_notify_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); int val; + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; + usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A)); + } + /* * Put the transceiver in non-driving mode. Otherwise host * may not detect soft-disconnection. @@ -263,9 +264,7 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) { int ret; - if (motg->pdata->link_clk_reset) - ret = motg->pdata->link_clk_reset(motg->clk, assert); - else if (assert) + if (assert) ret = reset_control_assert(motg->link_rst); else ret = reset_control_deassert(motg->link_rst); @@ -281,9 +280,7 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg) { int ret = 0; - if (motg->pdata->phy_clk_reset) - ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk); - else if (motg->phy_rst) + if (motg->phy_rst) ret = reset_control_reset(motg->phy_rst); if (ret) @@ -431,6 +428,24 @@ static int msm_phy_init(struct usb_phy *phy) ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); } + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; + ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A)); + + val = readl(USB_GENCONFIG_2); + val |= GENCONFIG_2_SESS_VLD_CTRL_EN; + writel(val, USB_GENCONFIG_2); + + val = readl(USB_USBCMD); + val |= USBCMD_SESS_VLD_CTRL; + writel(val, USB_USBCMD); + + val = ulpi_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, val, ULPI_FUNC_CTRL); + } + if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); @@ -1445,9 +1460,42 @@ static const struct of_device_id msm_otg_dt_match[] = { }; MODULE_DEVICE_TABLE(of, msm_otg_dt_match); +static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_usb_cable *vbus = container_of(nb, struct msm_usb_cable, nb); + struct msm_otg *motg = container_of(vbus, struct msm_otg, vbus); + + if (event) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + +static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_usb_cable *id = container_of(nb, struct msm_usb_cable, nb); + struct msm_otg *motg = container_of(id, struct msm_otg, id); + + if (event) + clear_bit(ID, &motg->inputs); + else + set_bit(ID, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) { struct msm_otg_platform_data *pdata; + struct extcon_dev *ext_id, *ext_vbus; const struct of_device_id *id; struct device_node *node = pdev->dev.of_node; struct property *prop; @@ -1496,6 +1544,54 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; } + motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup"); + + ext_id = ERR_PTR(-ENODEV); + ext_vbus = ERR_PTR(-ENODEV); + if (of_property_read_bool(node, "extcon")) { + + /* Each one of them is not mandatory */ + ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) + return PTR_ERR(ext_vbus); + + ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1); + if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) + return PTR_ERR(ext_id); + } + + if (!IS_ERR(ext_vbus)) { + motg->vbus.nb.notifier_call = msm_otg_vbus_notifier; + ret = extcon_register_interest(&motg->vbus.conn, ext_vbus->name, + "USB", &motg->vbus.nb); + if (ret < 0) { + dev_err(&pdev->dev, "register VBUS notifier failed\n"); + return ret; + } + + ret = extcon_get_cable_state(ext_vbus, "USB"); + if (ret) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + } + + if (!IS_ERR(ext_id)) { + motg->id.nb.notifier_call = msm_otg_id_notifier; + ret = extcon_register_interest(&motg->id.conn, ext_id->name, + "USB-HOST", &motg->id.nb); + if (ret < 0) { + dev_err(&pdev->dev, "register ID notifier failed\n"); + return ret; + } + + ret = extcon_get_cable_state(ext_id, "USB-HOST"); + if (ret) + clear_bit(ID, &motg->inputs); + else + set_bit(ID, &motg->inputs); + } + prop = of_find_property(node, "qcom,phy-init-sequence", &len); if (!prop || !len) return 0; @@ -1551,16 +1647,6 @@ static int msm_otg_probe(struct platform_device *pdev) phy = &motg->phy; phy->dev = &pdev->dev; - if (motg->pdata->phy_clk_reset) { - motg->phy_reset_clk = devm_clk_get(&pdev->dev, - np ? "phy" : "usb_phy_clk"); - - if (IS_ERR(motg->phy_reset_clk)) { - dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); - return PTR_ERR(motg->phy_reset_clk); - } - } - motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk"); if (IS_ERR(motg->clk)) { dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); @@ -1719,6 +1805,11 @@ static int msm_otg_remove(struct platform_device *pdev) if (phy->otg->host || phy->otg->gadget) return -EBUSY; + if (motg->id.conn.edev) + extcon_unregister_interest(&motg->id.conn); + if (motg->vbus.conn.edev) + extcon_unregister_interest(&motg->vbus.conn); + msm_otg_debugfs_cleanup(); cancel_delayed_work_sync(&motg->chg_work); cancel_work_sync(&motg->sm_work); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 8f7cb068d29b..3fcc0483a081 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -217,6 +217,9 @@ static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy) { unsigned int vbus_value; + if (!mxs_phy->regmap_anatop) + return false; + if (mxs_phy->port_id == 0) regmap_read(mxs_phy->regmap_anatop, ANADIG_USB1_VBUS_DET_STAT, diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c deleted file mode 100644 index f83808413ba2..000000000000 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Renesas R-Car Gen2 USB phy driver - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/platform_data/usb-rcar-gen2-phy.h> -#include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/usb/otg.h> - -struct rcar_gen2_usb_phy_priv { - struct usb_phy phy; - void __iomem *base; - struct clk *clk; - spinlock_t lock; - int usecount; - u32 ugctrl2; -}; - -#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy) - -/* Low Power Status register */ -#define USBHS_LPSTS_REG 0x02 -#define USBHS_LPSTS_SUSPM (1 << 14) - -/* USB General control register */ -#define USBHS_UGCTRL_REG 0x80 -#define USBHS_UGCTRL_CONNECT (1 << 2) -#define USBHS_UGCTRL_PLLRESET (1 << 0) - -/* USB General control register 2 */ -#define USBHS_UGCTRL2_REG 0x84 -#define USBHS_UGCTRL2_USB0_PCI (1 << 4) -#define USBHS_UGCTRL2_USB0_HS (3 << 4) -#define USBHS_UGCTRL2_USB2_PCI (0 << 31) -#define USBHS_UGCTRL2_USB2_SS (1 << 31) - -/* USB General status register */ -#define USBHS_UGSTS_REG 0x88 -#define USBHS_UGSTS_LOCK (3 << 8) - -/* Enable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_enable(void __iomem *base) -{ - u32 val; - int i; - - /* USBHS PHY power on */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val |= USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - for (i = 0; i < 20; i++) { - val = ioread32(base + USBHS_UGSTS_REG); - if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; - } - udelay(1); - } - - /* Timed out waiting for the PLL lock */ - return -ETIMEDOUT; -} - -/* Disable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_disable(void __iomem *base) -{ - u32 val; - - /* USBHS PHY power off */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val &= ~USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; -} - -/* Setup USB channels */ -static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv) -{ - u32 val; - - clk_prepare_enable(priv->clk); - - /* Set USB channels in the USBHS UGCTRL2 register */ - val = ioread32(priv->base + USBHS_UGCTRL2_REG); - val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS); - val |= priv->ugctrl2; - iowrite32(val, priv->base + USBHS_UGCTRL2_REG); -} - -/* Shutdown USB channels */ -static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv) -{ - __rcar_gen2_usbhs_phy_disable(priv->base); - clk_disable_unprepare(priv->clk); -} - -static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - int retval; - - spin_lock_irqsave(&priv->lock, flags); - retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) : - __rcar_gen2_usbhs_phy_enable(priv->base); - spin_unlock_irqrestore(&priv->lock, flags); - return retval; -} - -static int rcar_gen2_usb_phy_init(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - /* - * Enable the clock and setup USB channels - * if it's the first user - */ - if (!priv->usecount++) - __rcar_gen2_usb_phy_init(priv); - spin_unlock_irqrestore(&priv->lock, flags); - return 0; -} - -static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!priv->usecount) { - dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n"); - goto out; - } - - /* Disable everything if it's the last user */ - if (!--priv->usecount) - __rcar_gen2_usb_phy_shutdown(priv); -out: - spin_unlock_irqrestore(&priv->lock, flags); -} - -static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct rcar_gen2_phy_platform_data *pdata; - struct rcar_gen2_usb_phy_priv *priv; - struct resource *res; - void __iomem *base; - struct clk *clk; - int retval; - - pdata = dev_get_platdata(dev); - if (!pdata) { - dev_err(dev, "No platform data\n"); - return -EINVAL; - } - - clk = devm_clk_get(dev, "usbhs"); - if (IS_ERR(clk)) { - dev_err(dev, "Can't get the clock\n"); - return PTR_ERR(clk); - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - spin_lock_init(&priv->lock); - priv->clk = clk; - priv->base = base; - priv->ugctrl2 = pdata->chan0_pci ? - USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS; - priv->ugctrl2 |= pdata->chan2_pci ? - USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS; - priv->phy.dev = dev; - priv->phy.label = dev_name(dev); - priv->phy.init = rcar_gen2_usb_phy_init; - priv->phy.shutdown = rcar_gen2_usb_phy_shutdown; - priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend; - - retval = usb_add_phy_dev(&priv->phy); - if (retval < 0) { - dev_err(dev, "Failed to add USB phy\n"); - return retval; - } - - platform_set_drvdata(pdev, priv); - - return retval; -} - -static int rcar_gen2_usb_phy_remove(struct platform_device *pdev) -{ - struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev); - - usb_remove_phy(&priv->phy); - - return 0; -} - -static struct platform_driver rcar_gen2_usb_phy_driver = { - .driver = { - .name = "usb_phy_rcar_gen2", - }, - .probe = rcar_gen2_usb_phy_probe, - .remove = rcar_gen2_usb_phy_remove, -}; - -module_platform_driver(rcar_gen2_usb_phy_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy"); -MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>"); diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c index 845f658276b1..b40d6a87d694 100644 --- a/drivers/usb/phy/phy-tahvo.c +++ b/drivers/usb/phy/phy-tahvo.c @@ -60,10 +60,11 @@ struct tahvo_usb { struct extcon_dev extcon; }; -static const char *tahvo_cable[] = { - "USB-HOST", - "USB", - NULL, +static const unsigned int tahvo_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + + EXTCON_NONE, }; static ssize_t vbus_state_show(struct device *device, @@ -401,7 +402,8 @@ static int tahvo_usb_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, tu); tu->irq = platform_get_irq(pdev, 0); - ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt, 0, + ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt, + IRQF_ONESHOT, "tahvo-vbus", tu); if (ret) { dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n", diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 2f9735b35338..98f75d2842b7 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -22,6 +22,11 @@ static LIST_HEAD(phy_list); static LIST_HEAD(phy_bind_list); static DEFINE_SPINLOCK(phy_lock); +struct phy_devm { + struct usb_phy *phy; + struct notifier_block *nb; +}; + static struct usb_phy *__usb_find_phy(struct list_head *list, enum usb_phy_type type) { @@ -79,9 +84,20 @@ static void devm_usb_phy_release(struct device *dev, void *res) usb_put_phy(phy); } +static void devm_usb_phy_release2(struct device *dev, void *_res) +{ + struct phy_devm *res = _res; + + if (res->nb) + usb_unregister_notifier(res->phy, res->nb); + usb_put_phy(res->phy); +} + static int devm_usb_phy_match(struct device *dev, void *res, void *match_data) { - return res == match_data; + struct usb_phy **phy = res; + + return *phy == match_data; } /** @@ -151,40 +167,30 @@ err0: EXPORT_SYMBOL_GPL(usb_get_phy); /** - * devm_usb_get_phy_by_phandle - find the USB PHY by phandle + * devm_usb_get_phy_by_node - find the USB PHY by device_node * @dev - device that requests this phy - * @phandle - name of the property holding the phy phandle value - * @index - the index of the phy + * @node - the device_node for the phy device. + * @nb - a notifier_block to register with the phy. * - * Returns the phy driver associated with the given phandle value, + * Returns the phy driver associated with the given device_node, * after getting a refcount to it, -ENODEV if there is no such phy or - * -EPROBE_DEFER if there is a phandle to the phy, but the device is - * not yet loaded. While at that, it also associates the device with + * -EPROBE_DEFER if the device is not yet loaded. While at that, it + * also associates the device with * the phy using devres. On driver detach, release function is invoked * on the devres data, then, devres data is freed. * - * For use by USB host and peripheral drivers. + * For use by peripheral drivers for devices related to a phy, + * such as a charger. */ -struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, - const char *phandle, u8 index) +struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, + struct device_node *node, + struct notifier_block *nb) { - struct usb_phy *phy = ERR_PTR(-ENOMEM), **ptr; + struct usb_phy *phy = ERR_PTR(-ENOMEM); + struct phy_devm *ptr; unsigned long flags; - struct device_node *node; - - if (!dev->of_node) { - dev_dbg(dev, "device does not have a device node entry\n"); - return ERR_PTR(-EINVAL); - } - node = of_parse_phandle(dev->of_node, phandle, index); - if (!node) { - dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle, - dev->of_node->full_name); - return ERR_PTR(-ENODEV); - } - - ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); + ptr = devres_alloc(devm_usb_phy_release2, sizeof(*ptr), GFP_KERNEL); if (!ptr) { dev_dbg(dev, "failed to allocate memory for devres\n"); goto err0; @@ -203,8 +209,10 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, devres_free(ptr); goto err1; } - - *ptr = phy; + if (nb) + usb_register_notifier(phy, nb); + ptr->phy = phy; + ptr->nb = nb; devres_add(dev, ptr); get_device(phy->dev); @@ -213,10 +221,47 @@ err1: spin_unlock_irqrestore(&phy_lock, flags); err0: - of_node_put(node); return phy; } +EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_node); + +/** + * devm_usb_get_phy_by_phandle - find the USB PHY by phandle + * @dev - device that requests this phy + * @phandle - name of the property holding the phy phandle value + * @index - the index of the phy + * + * Returns the phy driver associated with the given phandle value, + * after getting a refcount to it, -ENODEV if there is no such phy or + * -EPROBE_DEFER if there is a phandle to the phy, but the device is + * not yet loaded. While at that, it also associates the device with + * the phy using devres. On driver detach, release function is invoked + * on the devres data, then, devres data is freed. + * + * For use by USB host and peripheral drivers. + */ +struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, + const char *phandle, u8 index) +{ + struct device_node *node; + struct usb_phy *phy; + + if (!dev->of_node) { + dev_dbg(dev, "device does not have a device node entry\n"); + return ERR_PTR(-EINVAL); + } + + node = of_parse_phandle(dev->of_node, phandle, index); + if (!node) { + dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle, + dev->of_node->full_name); + return ERR_PTR(-ENODEV); + } + phy = devm_usb_get_phy_by_node(dev, node, NULL); + of_node_put(node); + return phy; +} EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle); /** diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 4cf77d3c3bd2..e8bf40808b39 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -276,6 +276,16 @@ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, } /* + * interrupt functions + */ +void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit) +{ + u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0); + + usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask); +} + +/* * local functions */ static void usbhsc_set_buswait(struct usbhs_priv *priv) @@ -456,11 +466,15 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) static const struct of_device_id usbhs_of_match[] = { { .compatible = "renesas,usbhs-r8a7790", - .data = (void *)USBHS_TYPE_R8A7790, + .data = (void *)USBHS_TYPE_RCAR_GEN2, }, { .compatible = "renesas,usbhs-r8a7791", - .data = (void *)USBHS_TYPE_R8A7791, + .data = (void *)USBHS_TYPE_RCAR_GEN2, + }, + { + .compatible = "renesas,usbhs-r8a7794", + .data = (void *)USBHS_TYPE_RCAR_GEN2, }, { }, }; @@ -487,6 +501,9 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev) if (gpio > 0) dparam->enable_gpio = gpio; + if (dparam->type == USBHS_TYPE_RCAR_GEN2) + dparam->has_usb_dmac = 1; + return info; } @@ -540,8 +557,7 @@ static int usbhs_probe(struct platform_device *pdev) sizeof(struct renesas_usbhs_driver_param)); switch (priv->dparam.type) { - case USBHS_TYPE_R8A7790: - case USBHS_TYPE_R8A7791: + case USBHS_TYPE_RCAR_GEN2: priv->pfunc = usbhs_rcar2_ops; if (!priv->dparam.pipe_type) { priv->dparam.pipe_type = usbhsc_new_pipe_type; diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index fc96e924edc4..8c5fc12ad778 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -193,6 +193,7 @@ struct usbhs_priv; #define TYPE_BULK (1 << 14) #define TYPE_INT (2 << 14) #define TYPE_ISO (3 << 14) +#define BFRE (1 << 10) /* BRDY Interrupt Operation Spec. */ #define DBLB (1 << 9) /* Double Buffer Mode */ #define SHTNAK (1 << 7) /* Pipe Disable in Transfer End */ #define DIR_OUT (1 << 4) /* Transfer Direction */ @@ -216,6 +217,7 @@ struct usbhs_priv; #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ #define SQCLR (1 << 8) /* Toggle Bit Clear */ #define SQSET (1 << 7) /* Toggle Bit Set */ +#define SQMON (1 << 6) /* Toggle Bit Check */ #define PBUSY (1 << 5) /* Pipe Busy */ #define PID_MASK (0x3) /* Response PID */ #define PID_NAK 0 @@ -324,6 +326,11 @@ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub, u16 hubport, u16 speed); /* + * interrupt functions + */ +void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit); + +/* * data */ struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev); diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index d891bff39d66..c0f5c652d272 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -611,6 +611,8 @@ struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = { static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done) { struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); if (usbhs_pipe_is_busy(pipe)) return 0; @@ -624,6 +626,9 @@ static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_data_sequence(pipe, pkt->sequence); pkt->sequence = -1; /* -1 sequence will be ignored */ + if (usbhs_pipe_is_dcp(pipe)) + usbhsf_fifo_clear(pipe, fifo); + usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); usbhs_pipe_enable(pipe); usbhs_pipe_running(pipe, 1); @@ -673,7 +678,14 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done) *is_done = 1; usbhsf_rx_irq_ctrl(pipe, 0); usbhs_pipe_running(pipe, 0); - usbhs_pipe_disable(pipe); /* disable pipe first */ + /* + * If function mode, since this controller is possible to enter + * Control Write status stage at this timing, this driver + * should not disable the pipe. If such a case happens, this + * controller is not able to complete the status stage. + */ + if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_disable(pipe); /* disable pipe first */ } /* @@ -813,7 +825,8 @@ static void xfer_work(struct work_struct *work) desc->callback = usbhsf_dma_complete; desc->callback_param = pipe; - if (dmaengine_submit(desc) < 0) { + pkt->cookie = dmaengine_submit(desc); + if (pkt->cookie < 0) { dev_err(dev, "Failed to submit dma descriptor\n"); return; } @@ -822,10 +835,10 @@ static void xfer_work(struct work_struct *work) fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); usbhs_pipe_running(pipe, 1); - usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); - usbhs_pipe_enable(pipe); usbhsf_dma_start(pipe, fifo); + usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); dma_async_issue_pending(chan); + usbhs_pipe_enable(pipe); } /* @@ -838,6 +851,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) struct usbhs_fifo *fifo; int len = pkt->length - pkt->actual; int ret; + uintptr_t align_mask; if (usbhs_pipe_is_busy(pipe)) return 0; @@ -847,10 +861,14 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_is_dcp(pipe)) goto usbhsf_pio_prepare_push; - if (len & 0x7) /* 8byte alignment */ + /* check data length if this driver don't use USB-DMAC */ + if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7) goto usbhsf_pio_prepare_push; - if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + /* check buffer alignment */ + align_mask = usbhs_get_dparam(priv, has_usb_dmac) ? + USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7; + if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask) goto usbhsf_pio_prepare_push; /* return at this time if the pipe is running */ @@ -924,7 +942,85 @@ struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = { /* * DMA pop handler */ -static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) + +static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt, + int *is_done) +{ + return usbhsf_prepare_pop(pkt, is_done); +} + +static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, + int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo; + int ret; + + if (usbhs_pipe_is_busy(pipe)) + return 0; + + /* use PIO if packet is less than pio_dma_border or pipe is DCP */ + if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || + usbhs_pipe_is_dcp(pipe)) + goto usbhsf_pio_prepare_pop; + + fifo = usbhsf_get_dma_fifo(priv, pkt); + if (!fifo) + goto usbhsf_pio_prepare_pop; + + if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1)) + goto usbhsf_pio_prepare_pop; + + usbhs_pipe_config_change_bfre(pipe, 1); + + ret = usbhsf_fifo_select(pipe, fifo, 0); + if (ret < 0) + goto usbhsf_pio_prepare_pop; + + if (usbhsf_dma_map(pkt) < 0) + goto usbhsf_pio_prepare_pop_unselect; + + /* DMA */ + + /* + * usbhs_fifo_dma_pop_handler :: prepare + * enabled irq to come here. + * but it is no longer needed for DMA. disable it. + */ + usbhsf_rx_irq_ctrl(pipe, 0); + + pkt->trans = pkt->length; + + INIT_WORK(&pkt->work, xfer_work); + schedule_work(&pkt->work); + + return 0; + +usbhsf_pio_prepare_pop_unselect: + usbhsf_fifo_unselect(pipe, fifo); +usbhsf_pio_prepare_pop: + + /* + * change handler to PIO + */ + pkt->handler = &usbhs_fifo_pio_pop_handler; + usbhs_pipe_config_change_bfre(pipe, 0); + + return pkt->handler->prepare(pkt, is_done); +} + +static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); + + if (usbhs_get_dparam(priv, has_usb_dmac)) + return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done); + else + return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done); +} + +static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) { struct usbhs_pipe *pipe = pkt->pipe; struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); @@ -993,7 +1089,16 @@ usbhsf_pio_prepare_pop: return pkt->handler->try_run(pkt, is_done); } -static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) +static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); + + BUG_ON(usbhs_get_dparam(priv, has_usb_dmac)); + + return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done); +} + +static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) { struct usbhs_pipe *pipe = pkt->pipe; int maxp = usbhs_pipe_get_maxpacket(pipe); @@ -1017,8 +1122,68 @@ static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) return 0; } +static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt, + struct dma_chan *chan, int dtln) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct dma_tx_state state; + size_t received_size; + int maxp = usbhs_pipe_get_maxpacket(pipe); + + dmaengine_tx_status(chan, pkt->cookie, &state); + received_size = pkt->length - state.residue; + + if (dtln) { + received_size -= USBHS_USB_DMAC_XFER_SIZE; + received_size &= ~(maxp - 1); + received_size += dtln; + } + + return received_size; +} + +static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt, + int *is_done) +{ + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); + struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); + int rcv_len; + + /* + * Since the driver disables rx_irq in DMA mode, the interrupt handler + * cannot the BRDYSTS. So, the function clears it here because the + * driver may use PIO mode next time. + */ + usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe)); + + rcv_len = usbhsf_fifo_rcv_len(priv, fifo); + usbhsf_fifo_clear(pipe, fifo); + pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len); + + usbhsf_dma_stop(pipe, fifo); + usbhsf_dma_unmap(pkt); + usbhsf_fifo_unselect(pipe, pipe->fifo); + + /* The driver can assume the rx transaction is always "done" */ + *is_done = 1; + + return 0; +} + +static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); + + if (usbhs_get_dparam(priv, has_usb_dmac)) + return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done); + else + return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done); +} + struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = { - .prepare = usbhsf_prepare_pop, + .prepare = usbhsf_dma_prepare_pop, .try_run = usbhsf_dma_try_pop, .dma_done = usbhsf_dma_pop_done }; @@ -1069,23 +1234,35 @@ static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo) &fifo->rx_slave); } -static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo) +static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo, + int channel) { - fifo->tx_chan = dma_request_slave_channel_reason(dev, "tx"); - if (IS_ERR(fifo->tx_chan)) - fifo->tx_chan = NULL; - fifo->rx_chan = dma_request_slave_channel_reason(dev, "rx"); - if (IS_ERR(fifo->rx_chan)) - fifo->rx_chan = NULL; + char name[16]; + + /* + * To avoid complex handing for DnFIFOs, the driver uses each + * DnFIFO as TX or RX direction (not bi-direction). + * So, the driver uses odd channels for TX, even channels for RX. + */ + snprintf(name, sizeof(name), "ch%d", channel); + if (channel & 1) { + fifo->tx_chan = dma_request_slave_channel_reason(dev, name); + if (IS_ERR(fifo->tx_chan)) + fifo->tx_chan = NULL; + } else { + fifo->rx_chan = dma_request_slave_channel_reason(dev, name); + if (IS_ERR(fifo->rx_chan)) + fifo->rx_chan = NULL; + } } -static void usbhsf_dma_init(struct usbhs_priv *priv, - struct usbhs_fifo *fifo) +static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, + int channel) { struct device *dev = usbhs_priv_to_dev(priv); if (dev->of_node) - usbhsf_dma_init_dt(dev, fifo); + usbhsf_dma_init_dt(dev, fifo, channel); else usbhsf_dma_init_pdev(fifo); @@ -1231,7 +1408,7 @@ do { \ usbhs_get_dparam(priv, d##channel##_tx_id); \ fifo->rx_slave.shdma_slave.slave_id = \ usbhs_get_dparam(priv, d##channel##_rx_id); \ - usbhsf_dma_init(priv, fifo); \ + usbhsf_dma_init(priv, fifo, channel); \ } while (0) #define USBHS_DFIFO_INIT(priv, fifo, channel) \ diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index f07037c1185f..c7d9b86d51bf 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -44,10 +44,11 @@ struct usbhs_fifo_info { struct usbhs_fifo dfifo[USBHS_MAX_NUM_DFIFO]; }; #define usbhsf_get_dnfifo(p, n) (&((p)->fifo_info.dfifo[n])) -#define usbhs_for_each_dfifo(priv, dfifo, i) \ - for ((i) = 0, dfifo = usbhsf_get_dnfifo(priv, (i)); \ - ((i) < USBHS_MAX_NUM_DFIFO); \ - (i)++, dfifo = usbhsf_get_dnfifo(priv, (i))) +#define usbhs_for_each_dfifo(priv, dfifo, i) \ + for ((i) = 0; \ + ((i) < USBHS_MAX_NUM_DFIFO) && \ + ((dfifo) = usbhsf_get_dnfifo(priv, (i))); \ + (i)++) struct usbhs_pkt_handle; struct usbhs_pkt { @@ -58,6 +59,7 @@ struct usbhs_pkt { struct usbhs_pkt *pkt); struct work_struct work; dma_addr_t dma; + dma_cookie_t cookie; void *buf; int length; int trans; diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 9a705b15b3a1..d4be5d594896 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -218,10 +218,14 @@ static int usbhs_status_get_each_irq(struct usbhs_priv *priv, /******************** spin lock ********************/ usbhs_lock(priv, flags); state->intsts0 = usbhs_read(priv, INTSTS0); - state->intsts1 = usbhs_read(priv, INTSTS1); - intenb0 = usbhs_read(priv, INTENB0); - intenb1 = usbhs_read(priv, INTENB1); + + if (usbhs_mod_is_host(priv)) { + state->intsts1 = usbhs_read(priv, INTSTS1); + intenb1 = usbhs_read(priv, INTENB1); + } else { + state->intsts1 = intenb1 = 0; + } /* mask */ if (mod) { @@ -275,7 +279,8 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) * - Function :: VALID bit should 0 */ usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); - usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); + if (usbhs_mod_is_host(priv)) + usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); @@ -303,19 +308,20 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) if (irq_state.intsts0 & BRDY) usbhs_mod_call(priv, irq_ready, priv, &irq_state); - /* INTSTS1 */ - if (irq_state.intsts1 & ATTCH) - usbhs_mod_call(priv, irq_attch, priv, &irq_state); - - if (irq_state.intsts1 & DTCH) - usbhs_mod_call(priv, irq_dtch, priv, &irq_state); + if (usbhs_mod_is_host(priv)) { + /* INTSTS1 */ + if (irq_state.intsts1 & ATTCH) + usbhs_mod_call(priv, irq_attch, priv, &irq_state); - if (irq_state.intsts1 & SIGN) - usbhs_mod_call(priv, irq_sign, priv, &irq_state); + if (irq_state.intsts1 & DTCH) + usbhs_mod_call(priv, irq_dtch, priv, &irq_state); - if (irq_state.intsts1 & SACK) - usbhs_mod_call(priv, irq_sack, priv, &irq_state); + if (irq_state.intsts1 & SIGN) + usbhs_mod_call(priv, irq_sign, priv, &irq_state); + if (irq_state.intsts1 & SACK) + usbhs_mod_call(priv, irq_sack, priv, &irq_state); + } return IRQ_HANDLED; } @@ -334,7 +340,8 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) * - update INTSTS0 */ usbhs_write(priv, INTENB0, 0); - usbhs_write(priv, INTENB1, 0); + if (usbhs_mod_is_host(priv)) + usbhs_write(priv, INTENB1, 0); usbhs_write(priv, BEMPENB, 0); usbhs_write(priv, BRDYENB, 0); @@ -368,25 +375,27 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) intenb0 |= BRDYE; } - /* - * INTSTS1 - */ - if (mod->irq_attch) - intenb1 |= ATTCHE; + if (usbhs_mod_is_host(priv)) { + /* + * INTSTS1 + */ + if (mod->irq_attch) + intenb1 |= ATTCHE; - if (mod->irq_dtch) - intenb1 |= DTCHE; + if (mod->irq_dtch) + intenb1 |= DTCHE; - if (mod->irq_sign) - intenb1 |= SIGNE; + if (mod->irq_sign) + intenb1 |= SIGNE; - if (mod->irq_sack) - intenb1 |= SACKE; + if (mod->irq_sack) + intenb1 |= SACKE; + } } if (intenb0) usbhs_write(priv, INTENB0, intenb0); - if (intenb1) + if (usbhs_mod_is_host(priv) && intenb1) usbhs_write(priv, INTENB1, intenb1); } diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index e0384af77e56..dc2aa3261202 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -119,18 +119,34 @@ struct usbhsg_recip_handle { /* * queue push/pop */ -static void usbhsg_queue_pop(struct usbhsg_uep *uep, - struct usbhsg_request *ureq, - int status) +static void __usbhsg_queue_pop(struct usbhsg_uep *uep, + struct usbhsg_request *ureq, + int status) { struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); struct device *dev = usbhsg_gpriv_to_dev(gpriv); + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe)); ureq->req.status = status; + spin_unlock(usbhs_priv_to_lock(priv)); usb_gadget_giveback_request(&uep->ep, &ureq->req); + spin_lock(usbhs_priv_to_lock(priv)); +} + +static void usbhsg_queue_pop(struct usbhsg_uep *uep, + struct usbhsg_request *ureq, + int status) +{ + struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); + unsigned long flags; + + usbhs_lock(priv, flags); + __usbhsg_queue_pop(uep, ureq, status); + usbhs_unlock(priv, flags); } static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 96eead619282..bd050359926c 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1229,7 +1229,7 @@ static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv, break; case GetHubDescriptor: - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bHubContrCurrent = 0; desc->bNbrPorts = roothub_id; desc->bDescLength = 9; diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index 007f45abe96c..4f9c3356127a 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -84,6 +84,17 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, usbhs_bset(priv, pipe_reg, mask, val); } +static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, + u16 dcp_reg, u16 pipe_reg) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + + if (usbhs_pipe_is_dcp(pipe)) + return usbhs_read(priv, dcp_reg); + else + return usbhs_read(priv, pipe_reg); +} + /* * DCPCFG/PIPECFG functions */ @@ -92,6 +103,11 @@ static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); } +static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe) +{ + return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG); +} + /* * PIPEnTRN/PIPEnTRE functions */ @@ -616,6 +632,11 @@ void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence) usbhsp_pipectrl_set(pipe, mask, val); } +static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe) +{ + return !!(usbhsp_pipectrl_get(pipe) & SQMON); +} + void usbhs_pipe_clear(struct usbhs_pipe *pipe) { if (usbhs_pipe_is_dcp(pipe)) { @@ -626,6 +647,24 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe) } } +void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable) +{ + int sequence; + + if (usbhs_pipe_is_dcp(pipe)) + return; + + usbhsp_pipe_select(pipe); + /* check if the driver needs to change the BFRE value */ + if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE))) + return; + + sequence = usbhs_pipe_get_data_sequence(pipe); + usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0); + usbhs_pipe_clear(pipe); + usbhs_pipe_data_sequence(pipe, sequence); +} + static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) { struct usbhs_pipe *pos, *pipe; diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index d24a05972370..b0bc7b603016 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -97,6 +97,7 @@ void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len); void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo); void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, u16 epnum, u16 maxp); +void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable); #define usbhs_pipe_sequence_data0(pipe) usbhs_pipe_data_sequence(pipe, 0) #define usbhs_pipe_sequence_data1(pipe) usbhs_pipe_data_sequence(pipe, 1) diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index b7cf1982d1d9..56ecb8b5115d 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -171,7 +171,7 @@ config USB_SERIAL_FTDI_SIO ---help--- Say Y here if you want to use a FTDI SIO single port USB to serial converter device. The implementation I have is called the USC-1000. - This driver has also be tested with the 245 and 232 devices. + This driver has also been tested with the 245 and 232 devices. See <http://ftdi-usb-sio.sourceforge.net/> for more information on this driver and the device. diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index ede4f5fcfadd..c73808f095bb 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -325,7 +325,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - ch341_close(port); goto out; } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 84ce2d74894c..eac7ccaa3c85 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -127,6 +127,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ + { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ @@ -185,6 +187,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ + { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index c5dc233db2d9..972f5a5fe577 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -19,10 +19,11 @@ #include <linux/serial.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/serial_reg.h> static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1934, 0x0706) }, @@ -30,37 +31,218 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -#define CONTROL_DTR 0x01 -#define CONTROL_RTS 0x02 +/* Maximum baudrate for F81232 */ +#define F81232_MAX_BAUDRATE 115200 -#define UART_STATE 0x08 -#define UART_STATE_TRANSIENT_MASK 0x74 -#define UART_DCD 0x01 -#define UART_DSR 0x02 -#define UART_BREAK_ERROR 0x04 -#define UART_RING 0x08 -#define UART_FRAME_ERROR 0x10 -#define UART_PARITY_ERROR 0x20 -#define UART_OVERRUN_ERROR 0x40 -#define UART_CTS 0x80 +/* USB Control EP parameter */ +#define F81232_REGISTER_REQUEST 0xa0 +#define F81232_GET_REGISTER 0xc0 +#define F81232_SET_REGISTER 0x40 + +#define SERIAL_BASE_ADDRESS 0x0120 +#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) +#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) +#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) +#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) +#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) +#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) struct f81232_private { - spinlock_t lock; - u8 line_control; - u8 line_status; + struct mutex lock; + u8 modem_control; + u8 modem_status; + struct work_struct interrupt_work; + struct usb_serial_port *port; }; +static int calc_baud_divisor(speed_t baudrate) +{ + return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate); +} + +static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(*val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + status = usb_control_msg(dev, + usb_rcvctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_GET_REGISTER, + reg, + 0, + tmp, + sizeof(*val), + USB_CTRL_GET_TIMEOUT); + if (status != sizeof(*val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + *val = *tmp; + } + + kfree(tmp); + return status; +} + +static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + *tmp = val; + + status = usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_SET_REGISTER, + reg, + 0, + tmp, + sizeof(val), + USB_CTRL_SET_TIMEOUT); + if (status != sizeof(val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + } + + kfree(tmp); + return status; +} + +static void f81232_read_msr(struct usb_serial_port *port) +{ + int status; + u8 current_msr; + struct tty_struct *tty; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + status = f81232_get_register(port, MODEM_STATUS_REGISTER, + ¤t_msr); + if (status) { + dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); + mutex_unlock(&priv->lock); + return; + } + + if (!(current_msr & UART_MSR_ANY_DELTA)) { + mutex_unlock(&priv->lock); + return; + } + + priv->modem_status = current_msr; + + if (current_msr & UART_MSR_DCTS) + port->icount.cts++; + if (current_msr & UART_MSR_DDSR) + port->icount.dsr++; + if (current_msr & UART_MSR_TERI) + port->icount.rng++; + if (current_msr & UART_MSR_DDCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + current_msr & UART_MSR_DCD); + + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); + mutex_unlock(&priv->lock); +} + +static int f81232_set_mctrl(struct usb_serial_port *port, + unsigned int set, unsigned int clear) +{ + u8 val; + int status; + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) + return 0; /* no change */ + + /* 'set' takes precedence over 'clear' */ + clear &= ~set; + + /* force enable interrupt with OUT2 */ + mutex_lock(&priv->lock); + val = UART_MCR_OUT2 | priv->modem_control; + + if (clear & TIOCM_DTR) + val &= ~UART_MCR_DTR; + + if (clear & TIOCM_RTS) + val &= ~UART_MCR_RTS; + + if (set & TIOCM_DTR) + val |= UART_MCR_DTR; + + if (set & TIOCM_RTS) + val |= UART_MCR_RTS; + + dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, + val, priv->modem_control); + + status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s set MCR status < 0\n", __func__); + mutex_unlock(&priv->lock); + return status; + } + + priv->modem_control = val; + mutex_unlock(&priv->lock); + + return 0; +} + static void f81232_update_line_status(struct usb_serial_port *port, unsigned char *data, - unsigned int actual_length) + size_t actual_length) { - /* - * FIXME: Update port->icount, and call - * - * wake_up_interruptible(&port->port.delta_msr_wait); - * - * on MSR changes. - */ + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (!actual_length) + return; + + switch (data[0] & 0x07) { + case 0x00: /* msr change */ + dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); + schedule_work(&priv->interrupt_work); + break; + case 0x02: /* tx-empty */ + break; + case 0x04: /* rx data available */ + break; + case 0x06: /* lsr change */ + /* we can forget it. the LSR will read from bulk-in */ + dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); + break; + } } static void f81232_read_int_callback(struct urb *urb) @@ -104,55 +286,55 @@ exit: static void f81232_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct f81232_private *priv = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; - char tty_flag = TTY_NORMAL; - unsigned long flags; - u8 line_status; - int i; - - /* update line status */ - spin_lock_irqsave(&priv->lock, flags); - line_status = priv->line_status; - priv->line_status &= ~UART_STATE_TRANSIENT_MASK; - spin_unlock_irqrestore(&priv->lock, flags); - - if (!urb->actual_length) + char tty_flag; + unsigned int i; + u8 lsr; + + /* + * When opening the port we get a 1-byte packet with the current LSR, + * which we discard. + */ + if ((urb->actual_length < 2) || (urb->actual_length % 2)) return; - /* break takes precedence over parity, */ - /* which takes precedence over framing errors */ - if (line_status & UART_BREAK_ERROR) - tty_flag = TTY_BREAK; - else if (line_status & UART_PARITY_ERROR) - tty_flag = TTY_PARITY; - else if (line_status & UART_FRAME_ERROR) - tty_flag = TTY_FRAME; - dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag); - - /* overrun is special, not associated with a char */ - if (line_status & UART_OVERRUN_ERROR) - tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); - - if (port->port.console && port->sysrq) { - for (i = 0; i < urb->actual_length; ++i) - if (!usb_serial_handle_sysrq_char(port, data[i])) - tty_insert_flip_char(&port->port, data[i], - tty_flag); - } else { - tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, - urb->actual_length); + /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ + + for (i = 0; i < urb->actual_length; i += 2) { + tty_flag = TTY_NORMAL; + lsr = data[i]; + + if (lsr & UART_LSR_BRK_ERROR_BITS) { + if (lsr & UART_LSR_BI) { + tty_flag = TTY_BREAK; + port->icount.brk++; + usb_serial_handle_break(port); + } else if (lsr & UART_LSR_PE) { + tty_flag = TTY_PARITY; + port->icount.parity++; + } else if (lsr & UART_LSR_FE) { + tty_flag = TTY_FRAME; + port->icount.frame++; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + } + + if (port->port.console && port->sysrq) { + if (usb_serial_handle_sysrq_char(port, data[i + 1])) + continue; + } + + tty_insert_flip_char(&port->port, data[i + 1], tty_flag); } tty_flip_buffer_push(&port->port); } -static int set_control_lines(struct usb_device *dev, u8 value) -{ - /* FIXME - Stubbed out for now */ - return 0; -} - static void f81232_break_ctl(struct tty_struct *tty, int break_state) { /* FIXME - Stubbed out for now */ @@ -164,37 +346,198 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state) */ } +static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate) +{ + u8 lcr; + int divisor; + int status = 0; + + divisor = calc_baud_divisor(baudrate); + + status = f81232_get_register(port, LINE_CONTROL_REGISTER, + &lcr); /* get LCR */ + if (status) { + dev_err(&port->dev, "%s failed to get LCR: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr | UART_LCR_DLAB); /* Enable DLAB */ + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, + divisor & 0x00ff); /* low */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", + __func__, status); + goto reapply_lcr; + } + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + (divisor & 0xff00) >> 8); /* high */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", + __func__, status); + } + +reapply_lcr: + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr & ~UART_LCR_DLAB); + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + } +} + +static int f81232_port_enable(struct usb_serial_port *port) +{ + u8 val; + int status; + + /* fifo on, trigger8, clear TX/RX*/ + val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT; + + status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s failed to set FCR: %d\n", + __func__, status); + return status; + } + + /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + UART_IER_MSI); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static int f81232_port_disable(struct usb_serial_port *port) +{ + int status; + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + static void f81232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - /* FIXME - Stubbed out for now */ + u8 new_lcr = 0; + int status = 0; + speed_t baudrate; /* Don't change anything if nothing has changed */ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; - /* Do the real work here... */ - if (old_termios) - tty_termios_copy_hw(&tty->termios, old_termios); + if (C_BAUD(tty) == B0) + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + + baudrate = tty_get_baud_rate(tty); + if (baudrate > 0) { + if (baudrate > F81232_MAX_BAUDRATE) { + baudrate = F81232_MAX_BAUDRATE; + tty_encode_baud_rate(tty, baudrate, baudrate); + } + f81232_set_baudrate(port, baudrate); + } + + if (C_PARENB(tty)) { + new_lcr |= UART_LCR_PARITY; + + if (!C_PARODD(tty)) + new_lcr |= UART_LCR_EPAR; + + if (C_CMSPAR(tty)) + new_lcr |= UART_LCR_SPAR; + } + + if (C_CSTOPB(tty)) + new_lcr |= UART_LCR_STOP; + + switch (C_CSIZE(tty)) { + case CS5: + new_lcr |= UART_LCR_WLEN5; + break; + case CS6: + new_lcr |= UART_LCR_WLEN6; + break; + case CS7: + new_lcr |= UART_LCR_WLEN7; + break; + default: + case CS8: + new_lcr |= UART_LCR_WLEN8; + break; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); + if (status) { + dev_err(&port->dev, "%s failed to set LCR: %d\n", + __func__, status); + } } static int f81232_tiocmget(struct tty_struct *tty) { - /* FIXME - Stubbed out for now */ - return 0; + int r; + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *port_priv = usb_get_serial_port_data(port); + u8 mcr, msr; + + /* force get current MSR changed state */ + f81232_read_msr(port); + + mutex_lock(&port_priv->lock); + mcr = port_priv->modem_control; + msr = port_priv->modem_status; + mutex_unlock(&port_priv->lock); + + r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | + (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | + (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | + (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | + (msr & UART_MSR_RI ? TIOCM_RI : 0) | + (msr & UART_MSR_DSR ? TIOCM_DSR : 0); + + return r; } static int f81232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { - /* FIXME - Stubbed out for now */ - return 0; + struct usb_serial_port *port = tty->driver_data; + + return f81232_set_mctrl(port, set, clear); } static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { int result; + result = f81232_port_enable(port); + if (result) + return result; + /* Setup termios */ if (tty) f81232_set_termios(tty, port, NULL); @@ -217,59 +560,73 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) static void f81232_close(struct usb_serial_port *port) { + f81232_port_disable(port); usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } static void f81232_dtr_rts(struct usb_serial_port *port, int on) { - struct f81232_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - u8 control; - - spin_lock_irqsave(&priv->lock, flags); - /* Change DTR and RTS */ if (on) - priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); else - priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - control = priv->line_control; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, control); + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); } static int f81232_carrier_raised(struct usb_serial_port *port) { + u8 msr; struct f81232_private *priv = usb_get_serial_port_data(port); - if (priv->line_status & UART_DCD) + + mutex_lock(&priv->lock); + msr = priv->modem_status; + mutex_unlock(&priv->lock); + + if (msr & UART_MSR_DCD) return 1; return 0; } +static int f81232_get_serial_info(struct usb_serial_port *port, + unsigned long arg) +{ + struct serial_struct ser; + + memset(&ser, 0, sizeof(ser)); + + ser.type = PORT_16550A; + ser.line = port->minor; + ser.port = port->port_number; + ser.baud_base = F81232_MAX_BAUDRATE; + + if (copy_to_user((void __user *)arg, &ser, sizeof(ser))) + return -EFAULT; + + return 0; +} + static int f81232_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - struct serial_struct ser; struct usb_serial_port *port = tty->driver_data; switch (cmd) { case TIOCGSERIAL: - memset(&ser, 0, sizeof ser); - ser.type = PORT_16654; - ser.line = port->minor; - ser.port = port->port_number; - ser.baud_base = 460800; - - if (copy_to_user((void __user *)arg, &ser, sizeof ser)) - return -EFAULT; - - return 0; + return f81232_get_serial_info(port, arg); default: break; } return -ENOIOCTLCMD; } +static void f81232_interrupt_work(struct work_struct *work) +{ + struct f81232_private *priv = + container_of(work, struct f81232_private, interrupt_work); + + f81232_read_msr(priv->port); +} + static int f81232_port_probe(struct usb_serial_port *port) { struct f81232_private *priv; @@ -278,11 +635,13 @@ static int f81232_port_probe(struct usb_serial_port *port) if (!priv) return -ENOMEM; - spin_lock_init(&priv->lock); + mutex_init(&priv->lock); + INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); usb_set_serial_port_data(port, priv); port->port.drain_delay = 256; + priv->port = port; return 0; } @@ -308,7 +667,7 @@ static struct usb_serial_driver f81232_device = { .bulk_out_size = 256, .open = f81232_open, .close = f81232_close, - .dtr_rts = f81232_dtr_rts, + .dtr_rts = f81232_dtr_rts, .carrier_raised = f81232_carrier_raised, .ioctl = f81232_ioctl, .break_ctl = f81232_break_ctl, @@ -330,5 +689,6 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); -MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org"); +MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); +MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8eb68a31cab6..4c8b3b82103d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -699,6 +699,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) }, { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) }, { USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) }, { USB_DEVICE(XSENS_VID, XSENS_MTW_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4e4f46f3c89c..792e054126de 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -155,6 +155,7 @@ #define XSENS_AWINDA_STATION_PID 0x0101 #define XSENS_AWINDA_DONGLE_PID 0x0102 #define XSENS_MTW_PID 0x0200 /* Xsens MTw */ +#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */ #define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */ /* Xsens devices using FTDI VID */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 4f70df33975a..78b4f64c6b00 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -121,26 +121,26 @@ static DEFINE_SPINLOCK(release_lock); static const unsigned int dummy; /* for clarity in register access fns */ enum mos_regs { - THR, /* serial port regs */ - RHR, - IER, - FCR, - ISR, - LCR, - MCR, - LSR, - MSR, - SPR, - DLL, - DLM, - DPR, /* parallel port regs */ - DSR, - DCR, - ECR, - SP1_REG, /* device control regs */ - SP2_REG, /* serial port 2 (7720 only) */ - PP_REG, - SP_CONTROL_REG, + MOS7720_THR, /* serial port regs */ + MOS7720_RHR, + MOS7720_IER, + MOS7720_FCR, + MOS7720_ISR, + MOS7720_LCR, + MOS7720_MCR, + MOS7720_LSR, + MOS7720_MSR, + MOS7720_SPR, + MOS7720_DLL, + MOS7720_DLM, + MOS7720_DPR, /* parallel port regs */ + MOS7720_DSR, + MOS7720_DCR, + MOS7720_ECR, + MOS7720_SP1_REG, /* device control regs */ + MOS7720_SP2_REG, /* serial port 2 (7720 only) */ + MOS7720_PP_REG, + MOS7720_SP_CONTROL_REG, }; /* @@ -150,26 +150,26 @@ enum mos_regs { static inline __u16 get_reg_index(enum mos_regs reg) { static const __u16 mos7715_index_lookup_table[] = { - 0x00, /* THR */ - 0x00, /* RHR */ - 0x01, /* IER */ - 0x02, /* FCR */ - 0x02, /* ISR */ - 0x03, /* LCR */ - 0x04, /* MCR */ - 0x05, /* LSR */ - 0x06, /* MSR */ - 0x07, /* SPR */ - 0x00, /* DLL */ - 0x01, /* DLM */ - 0x00, /* DPR */ - 0x01, /* DSR */ - 0x02, /* DCR */ - 0x0a, /* ECR */ - 0x01, /* SP1_REG */ - 0x02, /* SP2_REG (7720 only) */ - 0x04, /* PP_REG (7715 only) */ - 0x08, /* SP_CONTROL_REG */ + 0x00, /* MOS7720_THR */ + 0x00, /* MOS7720_RHR */ + 0x01, /* MOS7720_IER */ + 0x02, /* MOS7720_FCR */ + 0x02, /* MOS7720_ISR */ + 0x03, /* MOS7720_LCR */ + 0x04, /* MOS7720_MCR */ + 0x05, /* MOS7720_LSR */ + 0x06, /* MOS7720_MSR */ + 0x07, /* MOS7720_SPR */ + 0x00, /* MOS7720_DLL */ + 0x01, /* MOS7720_DLM */ + 0x00, /* MOS7720_DPR */ + 0x01, /* MOS7720_DSR */ + 0x02, /* MOS7720_DCR */ + 0x0a, /* MOS7720_ECR */ + 0x01, /* MOS7720_SP1_REG */ + 0x02, /* MOS7720_SP2_REG (7720 only) */ + 0x04, /* MOS7720_PP_REG (7715 only) */ + 0x08, /* MOS7720_SP_CONTROL_REG */ }; return mos7715_index_lookup_table[reg]; } @@ -181,10 +181,10 @@ static inline __u16 get_reg_index(enum mos_regs reg) static inline __u16 get_reg_value(enum mos_regs reg, unsigned int serial_portnum) { - if (reg >= SP1_REG) /* control reg */ + if (reg >= MOS7720_SP1_REG) /* control reg */ return 0x0000; - else if (reg >= DPR) /* parallel port reg (7715 only) */ + else if (reg >= MOS7720_DPR) /* parallel port reg (7715 only) */ return 0x0100; else /* serial port reg */ @@ -252,7 +252,8 @@ static inline int mos7715_change_mode(struct mos7715_parport *mos_parport, enum mos7715_pp_modes mode) { mos_parport->shadowECR = mode; - write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR); + write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR, + mos_parport->shadowECR); return 0; } @@ -486,7 +487,7 @@ static void parport_mos7715_write_data(struct parport *pp, unsigned char d) if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, SPP); - write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d); + write_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, (__u8)d); parport_epilogue(pp); } @@ -497,7 +498,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp) if (parport_prologue(pp) < 0) return 0; - read_mos_reg(mos_parport->serial, dummy, DPR, &d); + read_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, &d); parport_epilogue(pp); return d; } @@ -510,7 +511,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d) if (parport_prologue(pp) < 0) return; data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0); - write_mos_reg(mos_parport->serial, dummy, DCR, data); + write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, data); mos_parport->shadowDCR = data; parport_epilogue(pp); } @@ -543,7 +544,8 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp, if (parport_prologue(pp) < 0) return 0; mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val; - write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, + mos_parport->shadowDCR); dcr = mos_parport->shadowDCR & 0x0f; parport_epilogue(pp); return dcr; @@ -581,7 +583,8 @@ static void parport_mos7715_data_forward(struct parport *pp) return; mos7715_change_mode(mos_parport, PS2); mos_parport->shadowDCR &= ~0x20; - write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, + mos_parport->shadowDCR); parport_epilogue(pp); } @@ -593,7 +596,8 @@ static void parport_mos7715_data_reverse(struct parport *pp) return; mos7715_change_mode(mos_parport, PS2); mos_parport->shadowDCR |= 0x20; - write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, + mos_parport->shadowDCR); parport_epilogue(pp); } @@ -633,8 +637,10 @@ static void parport_mos7715_restore_state(struct parport *pp, spin_unlock(&release_lock); return; } - write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR); - write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR); + write_parport_reg_nonblock(mos_parport, MOS7720_DCR, + mos_parport->shadowDCR); + write_parport_reg_nonblock(mos_parport, MOS7720_ECR, + mos_parport->shadowECR); spin_unlock(&release_lock); } @@ -714,14 +720,16 @@ static int mos7715_parport_init(struct usb_serial *serial) init_completion(&mos_parport->syncmsg_compl); /* cycle parallel port reset bit */ - write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80); - write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00); + write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x80); + write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x00); /* initialize device registers */ mos_parport->shadowDCR = DCR_INIT_VAL; - write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, + mos_parport->shadowDCR); mos_parport->shadowECR = ECR_INIT_VAL; - write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR); + write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR, + mos_parport->shadowECR); /* register with parport core */ mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE, @@ -1033,45 +1041,49 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) /* Initialize MCS7720 -- Write Init values to corresponding Registers * * Register Index - * 0 : THR/RHR - * 1 : IER - * 2 : FCR - * 3 : LCR - * 4 : MCR - * 5 : LSR - * 6 : MSR - * 7 : SPR + * 0 : MOS7720_THR/MOS7720_RHR + * 1 : MOS7720_IER + * 2 : MOS7720_FCR + * 3 : MOS7720_LCR + * 4 : MOS7720_MCR + * 5 : MOS7720_LSR + * 6 : MOS7720_MSR + * 7 : MOS7720_SPR * * 0x08 : SP1/2 Control Reg */ port_number = port->port_number; - read_mos_reg(serial, port_number, LSR, &data); + read_mos_reg(serial, port_number, MOS7720_LSR, &data); dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); - write_mos_reg(serial, dummy, SP1_REG, 0x02); - write_mos_reg(serial, dummy, SP2_REG, 0x02); + write_mos_reg(serial, dummy, MOS7720_SP1_REG, 0x02); + write_mos_reg(serial, dummy, MOS7720_SP2_REG, 0x02); - write_mos_reg(serial, port_number, IER, 0x00); - write_mos_reg(serial, port_number, FCR, 0x00); + write_mos_reg(serial, port_number, MOS7720_IER, 0x00); + write_mos_reg(serial, port_number, MOS7720_FCR, 0x00); - write_mos_reg(serial, port_number, FCR, 0xcf); + write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf); mos7720_port->shadowLCR = 0x03; - write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, MOS7720_LCR, + mos7720_port->shadowLCR); mos7720_port->shadowMCR = 0x0b; - write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + write_mos_reg(serial, port_number, MOS7720_MCR, + mos7720_port->shadowMCR); - write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00); - read_mos_reg(serial, dummy, SP_CONTROL_REG, &data); + write_mos_reg(serial, port_number, MOS7720_SP_CONTROL_REG, 0x00); + read_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, &data); data = data | (port->port_number + 1); - write_mos_reg(serial, dummy, SP_CONTROL_REG, data); + write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, data); mos7720_port->shadowLCR = 0x83; - write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); - write_mos_reg(serial, port_number, THR, 0x0c); - write_mos_reg(serial, port_number, IER, 0x00); + write_mos_reg(serial, port_number, MOS7720_LCR, + mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, MOS7720_THR, 0x0c); + write_mos_reg(serial, port_number, MOS7720_IER, 0x00); mos7720_port->shadowLCR = 0x03; - write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); - write_mos_reg(serial, port_number, IER, 0x0c); + write_mos_reg(serial, port_number, MOS7720_LCR, + mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, MOS7720_IER, 0x0c); response = usb_submit_urb(port->read_urb, GFP_KERNEL); if (response) @@ -1144,8 +1156,8 @@ static void mos7720_close(struct usb_serial_port *port) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - write_mos_reg(serial, port->port_number, MCR, 0x00); - write_mos_reg(serial, port->port_number, IER, 0x00); + write_mos_reg(serial, port->port_number, MOS7720_MCR, 0x00); + write_mos_reg(serial, port->port_number, MOS7720_IER, 0x00); mos7720_port->open = 0; } @@ -1169,7 +1181,8 @@ static void mos7720_break(struct tty_struct *tty, int break_state) data = mos7720_port->shadowLCR & ~UART_LCR_SBC; mos7720_port->shadowLCR = data; - write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port->port_number, MOS7720_LCR, + mos7720_port->shadowLCR); } /* @@ -1297,7 +1310,7 @@ static void mos7720_throttle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR &= ~UART_MCR_RTS; - write_mos_reg(port->serial, port->port_number, MCR, + write_mos_reg(port->serial, port->port_number, MOS7720_MCR, mos7720_port->shadowMCR); } } @@ -1327,7 +1340,7 @@ static void mos7720_unthrottle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR |= UART_MCR_RTS; - write_mos_reg(port->serial, port->port_number, MCR, + write_mos_reg(port->serial, port->port_number, MOS7720_MCR, mos7720_port->shadowMCR); } } @@ -1352,35 +1365,39 @@ static int set_higher_rates(struct moschip_port *mos7720_port, dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); port_number = port->port_number; - write_mos_reg(serial, port_number, IER, 0x00); - write_mos_reg(serial, port_number, FCR, 0x00); - write_mos_reg(serial, port_number, FCR, 0xcf); + write_mos_reg(serial, port_number, MOS7720_IER, 0x00); + write_mos_reg(serial, port_number, MOS7720_FCR, 0x00); + write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf); mos7720_port->shadowMCR = 0x0b; - write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); - write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00); + write_mos_reg(serial, port_number, MOS7720_MCR, + mos7720_port->shadowMCR); + write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x00); /*********************************************** * Set for higher rates * ***********************************************/ /* writing baud rate verbatum into uart clock field clearly not right */ if (port_number == 0) - sp_reg = SP1_REG; + sp_reg = MOS7720_SP1_REG; else - sp_reg = SP2_REG; + sp_reg = MOS7720_SP2_REG; write_mos_reg(serial, dummy, sp_reg, baud * 0x10); - write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03); + write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x03); mos7720_port->shadowMCR = 0x2b; - write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + write_mos_reg(serial, port_number, MOS7720_MCR, + mos7720_port->shadowMCR); /*********************************************** * Set DLL/DLM ***********************************************/ mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB; - write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); - write_mos_reg(serial, port_number, DLL, 0x01); - write_mos_reg(serial, port_number, DLM, 0x00); + write_mos_reg(serial, port_number, MOS7720_LCR, + mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, MOS7720_DLL, 0x01); + write_mos_reg(serial, port_number, MOS7720_DLM, 0x00); mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB; - write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, MOS7720_LCR, + mos7720_port->shadowLCR); return 0; } @@ -1488,15 +1505,16 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, /* Enable access to divisor latch */ mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB; - write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR); /* Write the divisor */ - write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff)); - write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8)); + write_mos_reg(serial, number, MOS7720_DLL, (__u8)(divisor & 0xff)); + write_mos_reg(serial, number, MOS7720_DLM, + (__u8)((divisor & 0xff00) >> 8)); /* Disable access to divisor latch */ mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB; - write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR); return status; } @@ -1600,14 +1618,16 @@ static void change_port_settings(struct tty_struct *tty, /* Disable Interrupts */ - write_mos_reg(serial, port_number, IER, 0x00); - write_mos_reg(serial, port_number, FCR, 0x00); - write_mos_reg(serial, port_number, FCR, 0xcf); + write_mos_reg(serial, port_number, MOS7720_IER, 0x00); + write_mos_reg(serial, port_number, MOS7720_FCR, 0x00); + write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf); /* Send the updated LCR value to the mos7720 */ - write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, MOS7720_LCR, + mos7720_port->shadowLCR); mos7720_port->shadowMCR = 0x0b; - write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + write_mos_reg(serial, port_number, MOS7720_MCR, + mos7720_port->shadowMCR); /* set up the MCR register and send it to the mos7720 */ mos7720_port->shadowMCR = UART_MCR_OUT2; @@ -1619,14 +1639,17 @@ static void change_port_settings(struct tty_struct *tty, /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ if (port_number) - write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); + write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, + 0x01); else - write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); + write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, + 0x02); } else mos7720_port->shadowMCR &= ~(UART_MCR_XONANY); - write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + write_mos_reg(serial, port_number, MOS7720_MCR, + mos7720_port->shadowMCR); /* Determine divisor based on baud rate */ baud = tty_get_baud_rate(tty); @@ -1639,7 +1662,7 @@ static void change_port_settings(struct tty_struct *tty, if (baud >= 230400) { set_higher_rates(mos7720_port, baud); /* Enable Interrupts */ - write_mos_reg(serial, port_number, IER, 0x0c); + write_mos_reg(serial, port_number, MOS7720_IER, 0x0c); return; } @@ -1650,7 +1673,7 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & CBAUD) tty_encode_baud_rate(tty, baud, baud); /* Enable Interrupts */ - write_mos_reg(serial, port_number, IER, 0x0c); + write_mos_reg(serial, port_number, MOS7720_IER, 0x0c); if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_KERNEL); @@ -1725,7 +1748,7 @@ static int get_lsr_info(struct tty_struct *tty, count = mos7720_chars_in_buffer(tty); if (count == 0) { - read_mos_reg(port->serial, port_number, LSR, &data); + read_mos_reg(port->serial, port_number, MOS7720_LSR, &data); if ((data & (UART_LSR_TEMT | UART_LSR_THRE)) == (UART_LSR_TEMT | UART_LSR_THRE)) { dev_dbg(&port->dev, "%s -- Empty\n", __func__); @@ -1782,7 +1805,7 @@ static int mos7720_tiocmset(struct tty_struct *tty, mcr &= ~UART_MCR_LOOP; mos7720_port->shadowMCR = mcr; - write_mos_reg(port->serial, port->port_number, MCR, + write_mos_reg(port->serial, port->port_number, MOS7720_MCR, mos7720_port->shadowMCR); return 0; @@ -1827,7 +1850,7 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, } mos7720_port->shadowMCR = mcr; - write_mos_reg(port->serial, port->port_number, MCR, + write_mos_reg(port->serial, port->port_number, MOS7720_MCR, mos7720_port->shadowMCR); return 0; @@ -1942,7 +1965,7 @@ static int mos7720_startup(struct usb_serial *serial) } #endif /* LSR For Port 1 */ - read_mos_reg(serial, 0, LSR, &data); + read_mos_reg(serial, 0, MOS7720_LSR, &data); dev_dbg(&dev->dev, "LSR:%x\n", data); return 0; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index e4473a9109cf..8ac9b55f05af 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2301,17 +2301,14 @@ static int mos7840_port_probe(struct usb_serial_port *port) goto error; } - init_timer(&mos7840_port->led_timer1); - mos7840_port->led_timer1.function = mos7840_led_off; + setup_timer(&mos7840_port->led_timer1, mos7840_led_off, + (unsigned long)mos7840_port); mos7840_port->led_timer1.expires = jiffies + msecs_to_jiffies(LED_ON_MS); - mos7840_port->led_timer1.data = (unsigned long)mos7840_port; - - init_timer(&mos7840_port->led_timer2); - mos7840_port->led_timer2.function = mos7840_led_flag_off; + setup_timer(&mos7840_port->led_timer2, mos7840_led_flag_off, + (unsigned long)mos7840_port); mos7840_port->led_timer2.expires = jiffies + msecs_to_jiffies(LED_OFF_MS); - mos7840_port->led_timer2.data = (unsigned long)mos7840_port; /* Turn off LED */ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0c0c53359ad..876423b8892c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1099,6 +1099,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff), .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */ + { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x9041, 0xff), + .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC7305/MC7355 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), @@ -1765,6 +1767,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, { } /* Terminating entry */ diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 829604d11f3f..f5257af33ecf 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -61,7 +61,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) }, { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, - { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1), .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65), diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 71fd9da1d6e7..e3b7af8adfb7 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -62,10 +62,6 @@ #define ALCATEL_VENDOR_ID 0x11f7 #define ALCATEL_PRODUCT_ID 0x02df -/* Samsung I330 phone cradle */ -#define SAMSUNG_VENDOR_ID 0x04e8 -#define SAMSUNG_PRODUCT_ID 0x8001 - #define SIEMENS_VENDOR_ID 0x11f5 #define SIEMENS_PRODUCT_ID_SX1 0x0001 #define SIEMENS_PRODUCT_ID_X65 0x0003 diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 9c63897b3a56..d156545728c2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -145,7 +145,6 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */ {DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */ {DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */ - {DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */ {DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */ {DEVICE_SWI(0x1199, 0x9053)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9054)}, /* Sierra Wireless Modem */ @@ -158,6 +157,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81b1)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */ /* Huawei devices */ {DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 46179a0828eb..07d1ecd564f7 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF), .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x1199, 0x68AB) }, /* Sierra Wireless AR8550 */ /* AT&T Direct IP LTE modems */ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF), .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 529066bbc7e8..46f1f13b41f1 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1306,6 +1306,7 @@ static void __exit usb_serial_exit(void) tty_unregister_driver(usb_serial_tty_driver); put_tty_driver(usb_serial_tty_driver); bus_unregister(&usb_serial_bus_type); + idr_destroy(&serial_minors); } diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index bf2bd40e5f2a..60afb39eb73c 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -95,7 +95,7 @@ static const struct usb_device_id id_table[] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, - { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), + { USB_DEVICE_INTERFACE_CLASS(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID, 0xff), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 62c2d9daa7d6..171fa7d793bc 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -42,6 +42,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-alauda" MODULE_DESCRIPTION("Driver for Alauda-based card readers"); MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>"); @@ -207,7 +210,8 @@ static struct alauda_card_info alauda_card_ids[] = { { 0,} }; -static struct alauda_card_info *alauda_card_find_id(unsigned char id) { +static struct alauda_card_info *alauda_card_find_id(unsigned char id) +{ int i; for (i = 0; alauda_card_ids[i].id != 0; i++) @@ -223,7 +227,8 @@ static struct alauda_card_info *alauda_card_find_id(unsigned char id) { static unsigned char parity[256]; static unsigned char ecc2[256]; -static void nand_init_ecc(void) { +static void nand_init_ecc(void) +{ int i, j, a; parity[0] = 0; @@ -247,7 +252,8 @@ static void nand_init_ecc(void) { } /* compute 3-byte ecc on 256 bytes */ -static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { +static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) +{ int i, j, a; unsigned char par = 0, bit, bits[8] = {0}; @@ -270,11 +276,13 @@ static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { ecc[2] = ecc2[par]; } -static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) { +static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) +{ return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); } -static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { +static void nand_store_ecc(unsigned char *data, unsigned char *ecc) +{ memcpy(data, ecc, 3); } @@ -1227,6 +1235,8 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } +static struct scsi_host_template alauda_host_template; + static int alauda_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1234,7 +1244,8 @@ static int alauda_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - alauda_usb_ids) + alauda_unusual_dev_list); + (id - alauda_usb_ids) + alauda_unusual_dev_list, + &alauda_host_template); if (result) return result; @@ -1248,7 +1259,7 @@ static int alauda_probe(struct usb_interface *intf, } static struct usb_driver alauda_driver = { - .name = "ums-alauda", + .name = DRV_NAME, .probe = alauda_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -1261,4 +1272,4 @@ static struct usb_driver alauda_driver = { .no_dynamic_id = 1, }; -module_usb_driver(alauda_driver); +module_usb_stor_driver(alauda_driver, alauda_host_template, DRV_NAME); diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 8514a2d82b72..c80d3dec9a34 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -30,6 +30,8 @@ #include "scsiglue.h" #include "debug.h" +#define DRV_NAME "ums-cypress" + MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB"); MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>"); MODULE_LICENSE("GPL"); @@ -96,13 +98,13 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */ goto invalid_fld; /* check protocol */ - switch((save_cmnd[1] >> 1) & 0xf) { - case 3: /*no DATA */ - case 4: /* PIO in */ - case 5: /* PIO out */ - break; - default: - goto invalid_fld; + switch ((save_cmnd[1] >> 1) & 0xf) { + case 3: /*no DATA */ + case 4: /* PIO in */ + case 5: /* PIO out */ + break; + default: + goto invalid_fld; } /* first build the ATACB command */ @@ -132,8 +134,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) || save_cmnd[11]) goto invalid_fld; } - } - else { /* ATA12 */ + } else { /* ATA12 */ srb->cmnd[ 6] = save_cmnd[3]; /* features */ srb->cmnd[ 7] = save_cmnd[4]; /* sector count */ srb->cmnd[ 8] = save_cmnd[5]; /* lba low */ @@ -242,6 +243,7 @@ end: srb->cmd_len = 12; } +static struct scsi_host_template cypress_host_template; static int cypress_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -251,7 +253,8 @@ static int cypress_probe(struct usb_interface *intf, struct usb_device *device; result = usb_stor_probe1(&us, intf, id, - (id - cypress_usb_ids) + cypress_unusual_dev_list); + (id - cypress_usb_ids) + cypress_unusual_dev_list, + &cypress_host_template); if (result) return result; @@ -274,7 +277,7 @@ static int cypress_probe(struct usb_interface *intf, } static struct usb_driver cypress_driver = { - .name = "ums-cypress", + .name = DRV_NAME, .probe = cypress_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -287,4 +290,4 @@ static struct usb_driver cypress_driver = { .no_dynamic_id = 1, }; -module_usb_driver(cypress_driver); +module_usb_stor_driver(cypress_driver, cypress_host_template, DRV_NAME); diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 7b17c2169812..aa4f51944a4a 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -59,6 +59,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-datafab" MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>"); @@ -721,6 +724,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } +static struct scsi_host_template datafab_host_template; + static int datafab_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -728,7 +733,8 @@ static int datafab_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - datafab_usb_ids) + datafab_unusual_dev_list); + (id - datafab_usb_ids) + datafab_unusual_dev_list, + &datafab_host_template); if (result) return result; @@ -742,7 +748,7 @@ static int datafab_probe(struct usb_interface *intf, } static struct usb_driver datafab_driver = { - .name = "ums-datafab", + .name = DRV_NAME, .probe = datafab_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -755,4 +761,4 @@ static struct usb_driver datafab_driver = { .no_dynamic_id = 1, }; -module_usb_driver(datafab_driver); +module_usb_stor_driver(datafab_driver, datafab_host_template, DRV_NAME); diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 56f782bef36b..f3cf4cecd2b7 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -28,6 +28,7 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" #define SD_INIT1_FIRMWARE "ene-ub6250/sd_init1.bin" #define SD_INIT2_FIRMWARE "ene-ub6250/sd_init2.bin" @@ -36,6 +37,8 @@ #define MSP_RW_FIRMWARE "ene-ub6250/msp_rdwr.bin" #define MS_RW_FIRMWARE "ene-ub6250/ms_rdwr.bin" +#define DRV_NAME "ums_eneub6250" + MODULE_DESCRIPTION("Driver for ENE UB6250 reader"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(SD_INIT1_FIRMWARE); @@ -2307,6 +2310,7 @@ static int ene_transport(struct scsi_cmnd *srb, struct us_data *us) return 0; } +static struct scsi_host_template ene_ub6250_host_template; static int ene_ub6250_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -2316,7 +2320,8 @@ static int ene_ub6250_probe(struct usb_interface *intf, struct us_data *us; result = usb_stor_probe1(&us, intf, id, - (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list); + (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list, + &ene_ub6250_host_template); if (result) return result; @@ -2404,7 +2409,7 @@ static int ene_ub6250_reset_resume(struct usb_interface *iface) #endif static struct usb_driver ene_ub6250_driver = { - .name = "ums_eneub6250", + .name = DRV_NAME, .probe = ene_ub6250_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -2417,4 +2422,4 @@ static struct usb_driver ene_ub6250_driver = { .no_dynamic_id = 1, }; -module_usb_driver(ene_ub6250_driver); +module_usb_stor_driver(ene_ub6250_driver, ene_ub6250_host_template, DRV_NAME); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index ef16068b7087..3f2b08966b9d 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -34,6 +34,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-freecom" MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor"); MODULE_AUTHOR("David Brown <usb-storage@davidb.org>"); @@ -523,6 +526,8 @@ static void pdump(struct us_data *us, void *ibuffer, int length) } #endif +static struct scsi_host_template freecom_host_template; + static int freecom_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -530,7 +535,8 @@ static int freecom_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - freecom_usb_ids) + freecom_unusual_dev_list); + (id - freecom_usb_ids) + freecom_unusual_dev_list, + &freecom_host_template); if (result) return result; @@ -544,7 +550,7 @@ static int freecom_probe(struct usb_interface *intf, } static struct usb_driver freecom_driver = { - .name = "ums-freecom", + .name = DRV_NAME, .probe = freecom_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -557,4 +563,4 @@ static struct usb_driver freecom_driver = { .no_dynamic_id = 1, }; -module_usb_driver(freecom_driver); +module_usb_stor_driver(freecom_driver, freecom_host_template, DRV_NAME); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 599d8bff26c3..1bac215202d2 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -60,6 +60,8 @@ #include "debug.h" #include "scsiglue.h" +#define DRV_NAME "ums-isd200" + MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); MODULE_LICENSE("GPL"); @@ -737,7 +739,7 @@ static void isd200_log_config(struct us_data *us, struct isd200_info *info) info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); - usb_stor_dbg(us, " ATA 3 State Supsend: 0x%x\n", + usb_stor_dbg(us, " ATA 3 State Suspend: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); usb_stor_dbg(us, " Descriptor Override: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); @@ -1537,6 +1539,8 @@ static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) isd200_srb_set_bufflen(srb, orig_bufflen); } +static struct scsi_host_template isd200_host_template; + static int isd200_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1544,7 +1548,8 @@ static int isd200_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - isd200_usb_ids) + isd200_unusual_dev_list); + (id - isd200_usb_ids) + isd200_unusual_dev_list, + &isd200_host_template); if (result) return result; @@ -1556,7 +1561,7 @@ static int isd200_probe(struct usb_interface *intf, } static struct usb_driver isd200_driver = { - .name = "ums-isd200", + .name = DRV_NAME, .probe = isd200_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -1569,4 +1574,4 @@ static struct usb_driver isd200_driver = { .no_dynamic_id = 1, }; -module_usb_driver(isd200_driver); +module_usb_stor_driver(isd200_driver, isd200_host_template, DRV_NAME); diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index 563078be6547..ee613e258db0 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -56,7 +56,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" +#define DRV_NAME "ums-jumpshot" MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader"); MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>"); @@ -647,6 +649,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } +static struct scsi_host_template jumpshot_host_template; + static int jumpshot_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -654,7 +658,8 @@ static int jumpshot_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list); + (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list, + &jumpshot_host_template); if (result) return result; @@ -668,7 +673,7 @@ static int jumpshot_probe(struct usb_interface *intf, } static struct usb_driver jumpshot_driver = { - .name = "ums-jumpshot", + .name = DRV_NAME, .probe = jumpshot_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -681,4 +686,4 @@ static struct usb_driver jumpshot_driver = { .no_dynamic_id = 1, }; -module_usb_driver(jumpshot_driver); +module_usb_stor_driver(jumpshot_driver, jumpshot_host_template, DRV_NAME); diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index 94d16ee5e84b..ae201e69475c 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -28,6 +28,9 @@ #include "usb.h" #include "transport.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-karma" MODULE_DESCRIPTION("Driver for Rio Karma"); MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>"); @@ -200,6 +203,8 @@ out: return ret; } +static struct scsi_host_template karma_host_template; + static int karma_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -207,7 +212,8 @@ static int karma_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - karma_usb_ids) + karma_unusual_dev_list); + (id - karma_usb_ids) + karma_unusual_dev_list, + &karma_host_template); if (result) return result; @@ -220,7 +226,7 @@ static int karma_probe(struct usb_interface *intf, } static struct usb_driver karma_driver = { - .name = "ums-karma", + .name = DRV_NAME, .probe = karma_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -233,4 +239,4 @@ static struct usb_driver karma_driver = { .no_dynamic_id = 1, }; -module_usb_driver(karma_driver); +module_usb_stor_driver(karma_driver, karma_host_template, DRV_NAME); diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 74e2aa23b045..acc3d03d8c1e 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -35,6 +35,9 @@ #include <linux/usb/input.h> #include "usb.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-onetouch" MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver"); MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>"); @@ -283,6 +286,8 @@ static void onetouch_release_input(void *onetouch_) } } +static struct scsi_host_template onetouch_host_template; + static int onetouch_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -290,7 +295,8 @@ static int onetouch_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - onetouch_usb_ids) + onetouch_unusual_dev_list); + (id - onetouch_usb_ids) + onetouch_unusual_dev_list, + &onetouch_host_template); if (result) return result; @@ -301,7 +307,7 @@ static int onetouch_probe(struct usb_interface *intf, } static struct usb_driver onetouch_driver = { - .name = "ums-onetouch", + .name = DRV_NAME, .probe = onetouch_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -314,4 +320,4 @@ static struct usb_driver onetouch_driver = { .no_dynamic_id = 1, }; -module_usb_driver(onetouch_driver); +module_usb_stor_driver(onetouch_driver, onetouch_host_template, DRV_NAME); diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 27e4a580d2ed..20433563a601 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -39,6 +39,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-realtek" MODULE_DESCRIPTION("Driver for Realtek USB Card Reader"); MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>"); @@ -1034,6 +1037,8 @@ INIT_FAIL: return -EIO; } +static struct scsi_host_template realtek_cr_host_template; + static int realtek_cr_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1044,7 +1049,8 @@ static int realtek_cr_probe(struct usb_interface *intf, result = usb_stor_probe1(&us, intf, id, (id - realtek_cr_ids) + - realtek_cr_unusual_dev_list); + realtek_cr_unusual_dev_list, + &realtek_cr_host_template); if (result) return result; @@ -1054,7 +1060,7 @@ static int realtek_cr_probe(struct usb_interface *intf, } static struct usb_driver realtek_cr_driver = { - .name = "ums-realtek", + .name = DRV_NAME, .probe = realtek_cr_probe, .disconnect = usb_stor_disconnect, /* .suspend = usb_stor_suspend, */ @@ -1070,4 +1076,4 @@ static struct usb_driver realtek_cr_driver = { .no_dynamic_id = 1, }; -module_usb_driver(realtek_cr_driver); +module_usb_stor_driver(realtek_cr_driver, realtek_cr_host_template, DRV_NAME); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 0e400f382f3a..dba51362d2e2 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -456,17 +456,13 @@ static int write_info(struct Scsi_Host *host, char *buffer, int length) return length; } -/* we use this macro to help us write into the buffer */ -#undef SPRINTF -#define SPRINTF(args...) seq_printf(m, ## args) - static int show_info (struct seq_file *m, struct Scsi_Host *host) { struct us_data *us = host_to_us(host); const char *string; /* print the controller name */ - SPRINTF(" Host scsi%d: usb-storage\n", host->host_no); + seq_printf(m, " Host scsi%d: usb-storage\n", host->host_no); /* print product, vendor, and serial number strings */ if (us->pusb_dev->manufacturer) @@ -475,26 +471,26 @@ static int show_info (struct seq_file *m, struct Scsi_Host *host) string = us->unusual_dev->vendorName; else string = "Unknown"; - SPRINTF(" Vendor: %s\n", string); + seq_printf(m, " Vendor: %s\n", string); if (us->pusb_dev->product) string = us->pusb_dev->product; else if (us->unusual_dev->productName) string = us->unusual_dev->productName; else string = "Unknown"; - SPRINTF(" Product: %s\n", string); + seq_printf(m, " Product: %s\n", string); if (us->pusb_dev->serial) string = us->pusb_dev->serial; else string = "None"; - SPRINTF("Serial Number: %s\n", string); + seq_printf(m, "Serial Number: %s\n", string); /* show the protocol and transport */ - SPRINTF(" Protocol: %s\n", us->protocol_name); - SPRINTF(" Transport: %s\n", us->transport_name); + seq_printf(m, " Protocol: %s\n", us->protocol_name); + seq_printf(m, " Transport: %s\n", us->transport_name); /* show the device flags */ - SPRINTF(" Quirks:"); + seq_printf(m, " Quirks:"); #define US_FLAG(name, value) \ if (us->fflags & value) seq_printf(m, " " #name); @@ -540,7 +536,7 @@ static struct device_attribute *sysfs_device_attr_list[] = { * this defines our host template, with which we'll allocate hosts */ -struct scsi_host_template usb_stor_host_template = { +static const struct scsi_host_template usb_stor_host_template = { /* basic userland interface stuff */ .name = "usb-storage", .proc_name = "usb-storage", @@ -558,7 +554,6 @@ struct scsi_host_template usb_stor_host_template = { /* queue commands only, only one command per LUN */ .can_queue = 1, - .cmd_per_lun = 1, /* unknown initiator id */ .this_id = -1, @@ -592,6 +587,16 @@ struct scsi_host_template usb_stor_host_template = { .module = THIS_MODULE }; +void usb_stor_host_template_init(struct scsi_host_template *sht, + const char *name, struct module *owner) +{ + *sht = usb_stor_host_template; + sht->name = name; + sht->proc_name = name; + sht->module = owner; +} +EXPORT_SYMBOL_GPL(usb_stor_host_template_init); + /* To Report "Illegal Request: Invalid Field in CDB */ unsigned char usb_stor_sense_invalidCDB[18] = { [0] = 0x70, /* current error */ diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h index ffa1cca93d2c..5494d87607fb 100644 --- a/drivers/usb/storage/scsiglue.h +++ b/drivers/usb/storage/scsiglue.h @@ -41,8 +41,9 @@ extern void usb_stor_report_device_reset(struct us_data *us); extern void usb_stor_report_bus_reset(struct us_data *us); +extern void usb_stor_host_template_init(struct scsi_host_template *sht, + const char *name, struct module *owner); extern unsigned char usb_stor_sense_invalidCDB[18]; -extern struct scsi_host_template usb_stor_host_template; #endif diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 3847053d732c..b74603689b9e 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -52,6 +52,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-sddr09" MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader"); MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>"); @@ -1738,6 +1741,8 @@ usb_stor_sddr09_init(struct us_data *us) { return sddr09_common_init(us); } +static struct scsi_host_template sddr09_host_template; + static int sddr09_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1745,7 +1750,8 @@ static int sddr09_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - sddr09_usb_ids) + sddr09_unusual_dev_list); + (id - sddr09_usb_ids) + sddr09_unusual_dev_list, + &sddr09_host_template); if (result) return result; @@ -1766,7 +1772,7 @@ static int sddr09_probe(struct usb_interface *intf, } static struct usb_driver sddr09_driver = { - .name = "ums-sddr09", + .name = DRV_NAME, .probe = sddr09_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -1779,4 +1785,4 @@ static struct usb_driver sddr09_driver = { .no_dynamic_id = 1, }; -module_usb_driver(sddr09_driver); +module_usb_stor_driver(sddr09_driver, sddr09_host_template, DRV_NAME); diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index aacedef9667c..e5e0a25ecd96 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -34,6 +34,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-sddr55" MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader"); MODULE_AUTHOR("Simon Munton"); @@ -968,6 +971,7 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer? } +static struct scsi_host_template sddr55_host_template; static int sddr55_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -976,7 +980,8 @@ static int sddr55_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - sddr55_usb_ids) + sddr55_unusual_dev_list); + (id - sddr55_usb_ids) + sddr55_unusual_dev_list, + &sddr55_host_template); if (result) return result; @@ -990,7 +995,7 @@ static int sddr55_probe(struct usb_interface *intf, } static struct usb_driver sddr55_driver = { - .name = "ums-sddr55", + .name = DRV_NAME, .probe = sddr55_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -1003,4 +1008,4 @@ static struct usb_driver sddr55_driver = { .no_dynamic_id = 1, }; -module_usb_driver(sddr55_driver); +module_usb_stor_driver(sddr55_driver, sddr55_host_template, DRV_NAME); diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 008d805c3d21..a3ec86b913a1 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -53,6 +53,9 @@ #include "transport.h" #include "protocol.h" #include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-usbat" MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable"); MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>"); @@ -1834,6 +1837,8 @@ static int init_usbat_flash(struct us_data *us) return init_usbat(us, USBAT_DEV_FLASH); } +static struct scsi_host_template usbat_host_template; + static int usbat_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1841,7 +1846,8 @@ static int usbat_probe(struct usb_interface *intf, int result; result = usb_stor_probe1(&us, intf, id, - (id - usbat_usb_ids) + usbat_unusual_dev_list); + (id - usbat_usb_ids) + usbat_unusual_dev_list, + &usbat_host_template); if (result) return result; @@ -1858,7 +1864,7 @@ static int usbat_probe(struct usb_interface *intf, } static struct usb_driver usbat_driver = { - .name = "ums-usbat", + .name = DRV_NAME, .probe = usbat_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -1871,4 +1877,4 @@ static struct usb_driver usbat_driver = { .no_dynamic_id = 1, }; -module_usb_driver(usbat_driver); +module_usb_stor_driver(usbat_driver, usbat_host_template, DRV_NAME); diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h index 9893d696fc97..f58caa9e6a27 100644 --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -51,7 +51,8 @@ static int uas_find_endpoints(struct usb_host_interface *alt, } static int uas_use_uas_driver(struct usb_interface *intf, - const struct usb_device_id *id) + const struct usb_device_id *id, + unsigned long *flags_ret) { struct usb_host_endpoint *eps[4] = { }; struct usb_device *udev = interface_to_usbdev(intf); @@ -73,7 +74,7 @@ static int uas_use_uas_driver(struct usb_interface *intf, * this writing the following versions exist: * ASM1051 - no uas support version * ASM1051 - with broken (*) uas support - * ASM1053 - with working uas support + * ASM1053 - with working uas support, but problems with large xfers * ASM1153 - with working uas support * * Devices with these chips re-use a number of device-ids over the @@ -103,6 +104,9 @@ static int uas_use_uas_driver(struct usb_interface *intf, } else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) { /* Possibly an ASM1051, disable uas */ flags |= US_FL_IGNORE_UAS; + } else { + /* ASM1053, these have issues with large transfers */ + flags |= US_FL_MAX_SECTORS_240; } } @@ -132,5 +136,8 @@ static int uas_use_uas_driver(struct usb_interface *intf, return 0; } + if (flags_ret) + *flags_ret = flags; + return 1; } diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 6cdabdc119a7..f68921909552 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -759,7 +759,10 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) static int uas_slave_alloc(struct scsi_device *sdev) { - sdev->hostdata = (void *)sdev->host->hostdata; + struct uas_dev_info *devinfo = + (struct uas_dev_info *)sdev->host->hostdata; + + sdev->hostdata = devinfo; /* USB has unusual DMA-alignment requirements: Although the * starting address of each scatter-gather element doesn't matter, @@ -778,6 +781,11 @@ static int uas_slave_alloc(struct scsi_device *sdev) */ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + if (devinfo->flags & US_FL_MAX_SECTORS_64) + blk_queue_max_hw_sectors(sdev->request_queue, 64); + else if (devinfo->flags & US_FL_MAX_SECTORS_240) + blk_queue_max_hw_sectors(sdev->request_queue, 240); + return 0; } @@ -803,7 +811,6 @@ static struct scsi_host_template uas_host_template = { .can_queue = 65536, /* Is there a limit on the _host_ ? */ .this_id = -1, .sg_tablesize = SG_NONE, - .cmd_per_lun = 1, /* until we override it */ .skip_settle_delay = 1, .use_blk_tags = 1, }; @@ -887,8 +894,9 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) struct Scsi_Host *shost = NULL; struct uas_dev_info *devinfo; struct usb_device *udev = interface_to_usbdev(intf); + unsigned long dev_flags; - if (!uas_use_uas_driver(intf, id)) + if (!uas_use_uas_driver(intf, id, &dev_flags)) return -ENODEV; if (uas_switch_interface(udev, intf)) @@ -910,8 +918,7 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) devinfo->udev = udev; devinfo->resetting = 0; devinfo->shutdown = 0; - devinfo->flags = id->driver_info; - usb_stor_adjust_quirks(udev, &devinfo->flags); + devinfo->flags = dev_flags; init_usb_anchor(&devinfo->cmd_urbs); init_usb_anchor(&devinfo->sense_urbs); init_usb_anchor(&devinfo->data_urbs); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d684b4b8108f..6b2479123de7 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -766,6 +766,13 @@ UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_GO_SLOW ), +/* Reported by Christian Schaller <cschalle@redhat.com> */ +UNUSUAL_DEV( 0x059f, 0x0651, 0x0000, 0x0000, + "LaCie", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT ), + /* Submitted by Joel Bourquard <numlock@freesurf.ch> * Some versions of this device need the SubClass and Protocol overrides * while others don't. @@ -2058,6 +2065,18 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), +/* Reported by Oliver Neukum <oneukum@suse.com> + * This device morphes spontaneously into another device if the access + * pattern of Windows isn't followed. Thus writable media would be dirty + * if the initial instance is used. So the device is limited to its + * virtual CD. + * And yes, the concept that BCD goes up to 9 is not heeded */ +UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff, + "ZTE,Incorporated", + "ZTE WCDMA Technologies MSM", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + /* Reported by Sven Geggus <sven-usbst@geggus.net> * This encrypted pen drive returns bogus data for the initial READ(10). */ @@ -2067,6 +2086,17 @@ UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_INITIAL_READ10 ), +/* Reported by Hans de Goede <hdegoede@redhat.com> + * These are mini projectors using USB for both power and video data transport + * The usb-storage interface is a virtual windows driver CD, which the gm12u320 + * driver automatically converts into framebuffer & kms dri device nodes. + */ +UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff, + "Grain-media Technology Corp.", + "USB3.0 Device GM12U320", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + /* Patch by Richard Schütz <r.schtz@t-online.de> * This external hard drive enclosure uses a JMicron chip which * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5600c33fcadb..43576ed31ccd 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -76,6 +76,8 @@ #include "uas-detect.h" #endif +#define DRV_NAME "usb-storage" + /* Some informational data */ MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); @@ -479,7 +481,8 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT | US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE | - US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES); + US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES | + US_FL_MAX_SECTORS_240); p = quirks; while (*p) { @@ -520,6 +523,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) case 'f': f |= US_FL_NO_REPORT_OPCODES; break; + case 'g': + f |= US_FL_MAX_SECTORS_240; + break; case 'h': f |= US_FL_CAPACITY_HEURISTICS; break; @@ -920,7 +926,8 @@ static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) int usb_stor_probe1(struct us_data **pus, struct usb_interface *intf, const struct usb_device_id *id, - struct us_unusual_dev *unusual_dev) + struct us_unusual_dev *unusual_dev, + struct scsi_host_template *sht) { struct Scsi_Host *host; struct us_data *us; @@ -932,7 +939,7 @@ int usb_stor_probe1(struct us_data **pus, * Ask the SCSI layer to allocate a host structure, with extra * space at the end for our private us_data structure. */ - host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us)); + host = scsi_host_alloc(sht, sizeof(*us)); if (!host) { dev_warn(&intf->dev, "Unable to allocate the scsi host\n"); return -ENOMEM; @@ -1069,6 +1076,8 @@ void usb_stor_disconnect(struct usb_interface *intf) } EXPORT_SYMBOL_GPL(usb_stor_disconnect); +static struct scsi_host_template usb_stor_host_template; + /* The main probe routine for standard devices */ static int storage_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -1080,7 +1089,7 @@ static int storage_probe(struct usb_interface *intf, /* If uas is enabled and this device can do uas then ignore it. */ #if IS_ENABLED(CONFIG_USB_UAS) - if (uas_use_uas_driver(intf, id)) + if (uas_use_uas_driver(intf, id, NULL)) return -ENXIO; #endif @@ -1109,7 +1118,8 @@ static int storage_probe(struct usb_interface *intf, id->idVendor, id->idProduct); } - result = usb_stor_probe1(&us, intf, id, unusual_dev); + result = usb_stor_probe1(&us, intf, id, unusual_dev, + &usb_stor_host_template); if (result) return result; @@ -1120,7 +1130,7 @@ static int storage_probe(struct usb_interface *intf, } static struct usb_driver usb_storage_driver = { - .name = "usb-storage", + .name = DRV_NAME, .probe = storage_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, @@ -1133,4 +1143,4 @@ static struct usb_driver usb_storage_driver = { .soft_unbind = 1, }; -module_usb_driver(usb_storage_driver); +module_usb_stor_driver(usb_storage_driver, usb_stor_host_template, DRV_NAME); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 307e339a9478..da0ad3241728 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -197,11 +197,25 @@ extern int usb_stor_post_reset(struct usb_interface *iface); extern int usb_stor_probe1(struct us_data **pus, struct usb_interface *intf, const struct usb_device_id *id, - struct us_unusual_dev *unusual_dev); + struct us_unusual_dev *unusual_dev, + struct scsi_host_template *sht); extern int usb_stor_probe2(struct us_data *us); extern void usb_stor_disconnect(struct usb_interface *intf); extern void usb_stor_adjust_quirks(struct usb_device *dev, unsigned long *fflags); +#define module_usb_stor_driver(__driver, __sht, __name) \ +static int __init __driver##_init(void) \ +{ \ + usb_stor_host_template_init(&(__sht), __name, THIS_MODULE); \ + return usb_register(&(__driver)); \ +} \ +module_init(__driver##_init); \ +static void __exit __driver##_exit(void) \ +{ \ + usb_deregister(&(__driver)); \ +} \ +module_exit(__driver##_exit) + #endif diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 11f6f61c2381..e9ef1eccdace 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -216,7 +216,7 @@ done: static inline void hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof(*desc)); - desc->bDescriptorType = 0x29; + desc->bDescriptorType = USB_DT_HUB; desc->bDescLength = 9; desc->wHubCharacteristics = __constant_cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index aa5af817f31c..a082fe62b1f0 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -182,7 +182,7 @@ static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, if (wLength < length) return -ENOSPC; descr->bDescLength = 7 + 2 * temp; - descr->bDescriptorType = 0x29; /* HUB type */ + descr->bDescriptorType = USB_DT_HUB; /* HUB type */ descr->bNbrPorts = wusbhc->ports_max; descr->wHubCharacteristics = cpu_to_le16( HUB_CHAR_COMMON_LPSM /* All ports power at once */ |