diff options
Diffstat (limited to 'include/linux/mmc/host.h')
| -rw-r--r-- | include/linux/mmc/host.h | 56 |
1 files changed, 53 insertions, 3 deletions
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 1d09562ccf73..0beba1e5e1ed 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -12,6 +12,7 @@ #include <linux/leds.h> #include <linux/sched.h> +#include <linux/fault-inject.h> #include <linux/mmc/core.h> #include <linux/mmc/pm.h> @@ -55,10 +56,13 @@ struct mmc_ios { #define MMC_TIMING_UHS_SDR50 3 #define MMC_TIMING_UHS_SDR104 4 #define MMC_TIMING_UHS_DDR50 5 +#define MMC_TIMING_MMC_HS200 6 #define MMC_SDR_MODE 0 #define MMC_1_2V_DDR_MODE 1 #define MMC_1_8V_DDR_MODE 2 +#define MMC_1_2V_SDR_MODE 3 +#define MMC_1_8V_SDR_MODE 4 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -108,6 +112,9 @@ struct mmc_host_ops { * It is optional for the host to implement pre_req and post_req in * order to support double buffering of requests (prepare one * request while another request is active). + * pre_req() must always be followed by a post_req(). + * To undo a call made to pre_req(), call post_req() with + * a nonzero err condition. */ void (*post_req)(struct mmc_host *host, struct mmc_request *req, int err); @@ -144,9 +151,12 @@ struct mmc_host_ops { void (*init_card)(struct mmc_host *host, struct mmc_card *card); int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios); - int (*execute_tuning)(struct mmc_host *host); + + /* The tuning command opcode value is different for SD and eMMC cards */ + int (*execute_tuning)(struct mmc_host *host, u32 opcode); void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); + void (*hw_reset)(struct mmc_host *host); }; struct mmc_card; @@ -162,6 +172,11 @@ struct mmc_async_req { int (*err_check) (struct mmc_card *, struct mmc_async_req *); }; +struct mmc_hotplug { + unsigned int irq; + void *handler_priv; +}; + struct mmc_host { struct device *parent; struct device class_dev; @@ -229,17 +244,36 @@ struct mmc_host { #define MMC_CAP_MAX_CURRENT_600 (1 << 28) /* Host max current limit is 600mA */ #define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */ #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ +#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ + + unsigned int caps2; /* More host capabilities */ + +#define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */ +#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ +#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ +#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ +#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */ +#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ +#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ + MMC_CAP2_HS200_1_2V_SDR) mmc_pm_flag_t pm_caps; /* supported pm features */ + unsigned int power_notify_type; +#define MMC_HOST_PW_NOTIFY_NONE 0 +#define MMC_HOST_PW_NOTIFY_SHORT 1 +#define MMC_HOST_PW_NOTIFY_LONG 2 #ifdef CONFIG_MMC_CLKGATE int clk_requests; /* internal reference counter */ unsigned int clk_delay; /* number of MCI clk hold cycles */ bool clk_gated; /* clock gated */ - struct work_struct clk_gate_work; /* delayed clock gate */ + struct delayed_work clk_gate_work; /* delayed clock gate */ unsigned int clk_old; /* old clock value cache */ spinlock_t clk_lock; /* lock for clk fields */ struct mutex clk_gate_mutex; /* mutex for clock gating */ + struct device_attribute clkgate_delay_attr; + unsigned long clkgate_delay; #endif /* host specific block data */ @@ -280,6 +314,8 @@ struct mmc_host { int claim_cnt; /* "claim" nesting count */ struct delayed_work detect; + int detect_change; /* card detect flag */ + struct mmc_hotplug hotplug; const struct mmc_bus_ops *bus_ops; /* current bus driver */ unsigned int bus_refs; /* reference counter */ @@ -302,6 +338,12 @@ struct mmc_host { struct mmc_async_req *areq; /* active async req */ +#ifdef CONFIG_FAIL_MMC_REQUEST + struct fault_attr fail_mmc_request; +#endif + + unsigned int actual_clock; /* Actual HC clock rate */ + unsigned long private[0] ____cacheline_aligned; }; @@ -330,6 +372,8 @@ extern int mmc_power_restore_host(struct mmc_host *host); extern void mmc_detect_change(struct mmc_host *, unsigned long delay); extern void mmc_request_done(struct mmc_host *, struct mmc_request *); +extern int mmc_cache_ctrl(struct mmc_host *, u8); + static inline void mmc_signal_sdio_irq(struct mmc_host *host) { host->ops->enable_sdio_irq(host, 0); @@ -373,7 +417,7 @@ static inline void mmc_set_disable_delay(struct mmc_host *host, } /* Module parameter */ -extern int mmc_assume_removable; +extern bool mmc_assume_removable; static inline int mmc_card_is_removable(struct mmc_host *host) { @@ -394,4 +438,10 @@ static inline int mmc_host_cmd23(struct mmc_host *host) { return host->caps & MMC_CAP_CMD23; } + +static inline int mmc_boot_partition_access(struct mmc_host *host) +{ + return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC); +} + #endif /* LINUX_MMC_HOST_H */ |