diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/clk-provider.h | 16 | ||||
| -rw-r--r-- | include/linux/dma/ipu-dma.h | 177 | ||||
| -rw-r--r-- | include/linux/irqchip/versatile-fpga.h | 13 | ||||
| -rw-r--r-- | include/linux/mfd/db8500-prcmu.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/dbx500-prcmu.h | 10 | ||||
| -rw-r--r-- | include/linux/mm.h | 4 | ||||
| -rw-r--r-- | include/linux/mmzone.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/asoc-imx-ssi.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-imx.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/omap_ocp2scp.h | 31 | ||||
| -rw-r--r-- | include/linux/platform_data/uio_pruss.h | 3 | ||||
| -rw-r--r-- | include/linux/rio.h | 2 | ||||
| -rw-r--r-- | include/linux/sh_clk.h | 9 | ||||
| -rw-r--r-- | include/linux/tegra-ahb.h | 19 | ||||
| -rw-r--r-- | include/linux/vexpress.h | 121 |
15 files changed, 402 insertions, 15 deletions
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index c12731582920..172d5bdaf03d 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -53,9 +53,13 @@ struct clk_hw; * @disable: Disable the clock atomically. Called with enable_lock held. * This function must not sleep. * - * @recalc_rate Recalculate the rate of this clock, by quering hardware. The + * @is_enabled: Queries the hardware to determine if the clock is enabled. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. + * + * @recalc_rate Recalculate the rate of this clock, by querying hardware. The * parent rate is an input parameter. It is up to the caller to - * insure that the prepare_mutex is held across this call. + * ensure that the prepare_mutex is held across this call. * Returns the calculated rate. Optional, but recommended - if * this op is not set then clock rate will be initialized to 0. * @@ -89,7 +93,7 @@ struct clk_hw; * implementations to split any work between atomic (enable) and sleepable * (prepare) contexts. If enabling a clock requires code that might sleep, * this must be done in clk_prepare. Clock enable code that will never be - * called in a sleepable context may be implement in clk_enable. + * called in a sleepable context may be implemented in clk_enable. * * Typically, drivers will call clk_prepare when a clock may be needed later * (eg. when a device is opened), and clk_enable when the clock is actually @@ -335,11 +339,11 @@ const char *__clk_get_name(struct clk *clk); struct clk_hw *__clk_get_hw(struct clk *clk); u8 __clk_get_num_parents(struct clk *clk); struct clk *__clk_get_parent(struct clk *clk); -inline int __clk_get_enable_count(struct clk *clk); -inline int __clk_get_prepare_count(struct clk *clk); +unsigned int __clk_get_enable_count(struct clk *clk); +unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); -int __clk_is_enabled(struct clk *clk); +bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); /* diff --git a/include/linux/dma/ipu-dma.h b/include/linux/dma/ipu-dma.h new file mode 100644 index 000000000000..18031115c668 --- /dev/null +++ b/include/linux/dma/ipu-dma.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_DMA_IPU_DMA_H +#define __LINUX_DMA_IPU_DMA_H + +#include <linux/types.h> +#include <linux/dmaengine.h> + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif /* __LINUX_DMA_IPU_DMA_H */ diff --git a/include/linux/irqchip/versatile-fpga.h b/include/linux/irqchip/versatile-fpga.h new file mode 100644 index 000000000000..1fac9651d3ca --- /dev/null +++ b/include/linux/irqchip/versatile-fpga.h @@ -0,0 +1,13 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct device_node; +struct pt_regs; + +void fpga_handle_irq(struct pt_regs *regs); +void fpga_irq_init(void __iomem *, const char *, int, int, u32, + struct device_node *node); +int fpga_irq_of_init(struct device_node *node, + struct device_node *parent); + +#endif diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index b82f6ee66a0b..6ee4247df11e 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -515,7 +515,6 @@ enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); struct prcmu_fw_version *prcmu_get_fw_version(void); -int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); @@ -564,6 +563,7 @@ int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); int db8500_prcmu_set_ape_opp(u8 opp); int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_request_ape_opp_100_voltage(bool enable); int db8500_prcmu_set_ddr_opp(u8 opp); int db8500_prcmu_get_ddr_opp(void); @@ -610,7 +610,7 @@ static inline int db8500_prcmu_get_ape_opp(void) return APE_100_OPP; } -static inline int prcmu_request_ape_opp_100_voltage(bool enable) +static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable) { return 0; } diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index c410d99bd667..c202d6c4d879 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -336,6 +336,11 @@ static inline int prcmu_get_ape_opp(void) return db8500_prcmu_get_ape_opp(); } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return db8500_prcmu_request_ape_opp_100_voltage(enable); +} + static inline void prcmu_system_reset(u16 reset_code) { return db8500_prcmu_system_reset(reset_code); @@ -507,6 +512,11 @@ static inline int prcmu_get_ape_opp(void) return APE_100_OPP; } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + static inline int prcmu_set_arm_opp(u8 opp) { return 0; diff --git a/include/linux/mm.h b/include/linux/mm.h index fa0680402738..bcaab4e6fe91 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1684,9 +1684,5 @@ static inline unsigned int debug_guardpage_minorder(void) { return 0; } static inline bool page_is_guard(struct page *page) { return false; } #endif /* CONFIG_DEBUG_PAGEALLOC */ -extern void reset_zone_present_pages(void); -extern void fixup_zone_present_pages(int nid, unsigned long start_pfn, - unsigned long end_pfn); - #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 50aaca81f63d..a23923ba8263 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -752,7 +752,7 @@ extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn, unsigned long size, enum memmap_context context); -extern void lruvec_init(struct lruvec *lruvec, struct zone *zone); +extern void lruvec_init(struct lruvec *lruvec); static inline struct zone *lruvec_zone(struct lruvec *lruvec) { diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h index 63f3c2804239..92c7fd72f636 100644 --- a/include/linux/platform_data/asoc-imx-ssi.h +++ b/include/linux/platform_data/asoc-imx-ssi.h @@ -17,5 +17,7 @@ struct imx_ssi_platform_data { void (*ac97_warm_reset)(struct snd_ac97 *ac97); }; +extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); + #endif /* __MACH_SSI_H */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 1b9080385b46..f6d30cc1cb77 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -61,7 +61,9 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx-dma"); + !strcmp(dev_name(chan->device->dev), "imx1-dma") || + !strcmp(dev_name(chan->device->dev), "imx21-dma") || + !strcmp(dev_name(chan->device->dev), "imx27-dma"); } #endif diff --git a/include/linux/platform_data/omap_ocp2scp.h b/include/linux/platform_data/omap_ocp2scp.h new file mode 100644 index 000000000000..5c6c3939355f --- /dev/null +++ b/include/linux/platform_data/omap_ocp2scp.h @@ -0,0 +1,31 @@ +/* + * omap_ocp2scp.h -- ocp2scp header file + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_OMAP_OCP2SCP_H +#define __DRIVERS_OMAP_OCP2SCP_H + +struct omap_ocp2scp_dev { + const char *drv_name; + struct resource *res; +}; + +struct omap_ocp2scp_platform_data { + int dev_cnt; + struct omap_ocp2scp_dev **devices; +}; +#endif /* __DRIVERS_OMAP_OCP2SCP_H */ diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h index f39140aabc6f..3d47d219827f 100644 --- a/include/linux/platform_data/uio_pruss.h +++ b/include/linux/platform_data/uio_pruss.h @@ -20,6 +20,7 @@ /* To configure the PRUSS INTC base offset for UIO driver */ struct uio_pruss_pdata { - u32 pintc_base; + u32 pintc_base; + struct gen_pool *sram_pool; }; #endif /* _UIO_PRUSS_H_ */ diff --git a/include/linux/rio.h b/include/linux/rio.h index 4187da511006..a3e784278667 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -275,9 +275,11 @@ struct rio_id_table { * struct rio_net - RIO network info * @node: Node in global list of RIO networks * @devices: List of devices in this network + * @switches: List of switches in this netowrk * @mports: List of master ports accessing this network * @hport: Default port for accessing this network * @id: RIO network ID + * @destid_table: destID allocation table */ struct rio_net { struct list_head node; /* node in list of networks */ diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 50910913b268..60c72395ec6b 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -199,4 +199,13 @@ int sh_clk_div6_reparent_register(struct clk *clks, int nr); #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } #define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } +/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */ +#define SH_CLK_FSIDIV(_reg, _parent) \ +{ \ + .enable_reg = (void __iomem *)_reg, \ + .parent = _parent, \ +} + +int sh_clk_fsidiv_register(struct clk *clks, int nr); + #endif /* __SH_CLOCK_H */ diff --git a/include/linux/tegra-ahb.h b/include/linux/tegra-ahb.h new file mode 100644 index 000000000000..f1cd075ceee1 --- /dev/null +++ b/include/linux/tegra-ahb.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __LINUX_AHB_H__ +#define __LINUX_AHB_H__ + +extern int tegra_ahb_enable_smmu(struct device_node *ahb); + +#endif /* __LINUX_AHB_H__ */ diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h new file mode 100644 index 000000000000..c52215ff4245 --- /dev/null +++ b/include/linux/vexpress.h @@ -0,0 +1,121 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#ifndef _LINUX_VEXPRESS_H +#define _LINUX_VEXPRESS_H + +#include <linux/device.h> + +#define VEXPRESS_SITE_MB 0 +#define VEXPRESS_SITE_DB1 1 +#define VEXPRESS_SITE_DB2 2 +#define VEXPRESS_SITE_MASTER 0xf + +#define VEXPRESS_CONFIG_STATUS_DONE 0 +#define VEXPRESS_CONFIG_STATUS_WAIT 1 + +#define VEXPRESS_GPIO_MMC_CARDIN 0 +#define VEXPRESS_GPIO_MMC_WPROT 1 +#define VEXPRESS_GPIO_FLASH_WPn 2 + +#define VEXPRESS_RES_FUNC(_site, _func) \ +{ \ + .start = (_site), \ + .end = (_func), \ + .flags = IORESOURCE_BUS, \ +} + +/* Config bridge API */ + +/** + * struct vexpress_config_bridge_info - description of the platform + * configuration infrastructure bridge. + * + * @name: Bridge name + * + * @func_get: Obtains pointer to a configuration function for a given + * device or a Device Tree node, to be used with @func_put + * and @func_exec. The node pointer should take precedence + * over device pointer when both are passed. + * + * @func_put: Tells the bridge that the function will not be used any + * more, so all allocated resources can be released. + * + * @func_exec: Executes a configuration function read or write operation. + * The offset selects a 32 bit word of the value accessed. + * Must return VEXPRESS_CONFIG_STATUS_DONE when operation + * is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when + * will be completed in some time or negative value in case + * of error. + */ +struct vexpress_config_bridge_info { + const char *name; + void *(*func_get)(struct device *dev, struct device_node *node); + void (*func_put)(void *func); + int (*func_exec)(void *func, int offset, bool write, u32 *data); +}; + +struct vexpress_config_bridge; + +struct vexpress_config_bridge *vexpress_config_bridge_register( + struct device_node *node, + struct vexpress_config_bridge_info *info); +void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge); + +void vexpress_config_complete(struct vexpress_config_bridge *bridge, + int status); + +/* Config function API */ + +struct vexpress_config_func; + +struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, + struct device_node *node); +#define vexpress_config_func_get_by_dev(dev) \ + __vexpress_config_func_get(dev, NULL) +#define vexpress_config_func_get_by_node(node) \ + __vexpress_config_func_get(NULL, node) +void vexpress_config_func_put(struct vexpress_config_func *func); + +/* Both may sleep! */ +int vexpress_config_read(struct vexpress_config_func *func, int offset, + u32 *data); +int vexpress_config_write(struct vexpress_config_func *func, int offset, + u32 data); + +/* Platform control */ + +u32 vexpress_get_procid(int site); +u32 vexpress_get_hbi(int site); +void *vexpress_get_24mhz_clock_base(void); +void vexpress_flags_set(u32 data); + +#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node) +#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL) +unsigned __vexpress_get_site(struct device *dev, struct device_node *node); + +void vexpress_sysreg_early_init(void __iomem *base); +void vexpress_sysreg_of_early_init(void); + +void vexpress_power_off(void); +void vexpress_restart(char str, const char *cmd); + +/* Clocks */ + +struct clk *vexpress_osc_setup(struct device *dev); +void vexpress_osc_of_setup(struct device_node *node); + +void vexpress_clk_init(void __iomem *sp810_base); +void vexpress_clk_of_init(void); + +#endif |