diff options
Diffstat (limited to 'include')
27 files changed, 287 insertions, 94 deletions
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 2e34db82a643..622fc505d3e1 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -144,6 +144,7 @@ struct bcma_host_ops { /* Chip IDs of PCIe devices */ #define BCMA_CHIP_ID_BCM4313 0x4313 +#define BCMA_CHIP_ID_BCM43142 43142 #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index b8b09eac60a4..c49e1a159e6e 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -330,6 +330,8 @@ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ +#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100 +#define BCMA_CC_PMU_STAT_WDRESET 0x00000080 #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ @@ -355,6 +357,11 @@ #define BCMA_CC_REGCTL_DATA 0x065C #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ +#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ +#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF +#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000 +#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ /* NAND flash MLC controller registers (corerev >= 38) */ #define BCMA_CC_NAND_REVISION 0x0C00 @@ -435,6 +442,23 @@ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 +/* PMU rev 15 */ +#define BCMA_CC_PMU15_PLL_PLLCTL0 0 +#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003 +#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0 +#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC +#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2 +#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000 +#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22 +#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000 +#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24 +#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000 +#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27 +#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000 +#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30 +#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000 +#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31 + /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 /* HT clock for systems with PMU-enabled chipcommon */ @@ -507,6 +531,37 @@ #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) +#define BCMA_RES_4314_LPLDO_PU BIT(0) +#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1) +#define BCMA_RES_4314_PMU_BG_PU BIT(2) +#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3) +#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4) +#define BCMA_RES_4314_CLDO_PU BIT(5) +#define BCMA_RES_4314_LPLDO2_LVM BIT(6) +#define BCMA_RES_4314_WL_PMU_PU BIT(7) +#define BCMA_RES_4314_LNLDO_PU BIT(8) +#define BCMA_RES_4314_LDO3P3_PU BIT(9) +#define BCMA_RES_4314_OTP_PU BIT(10) +#define BCMA_RES_4314_XTAL_PU BIT(11) +#define BCMA_RES_4314_WL_PWRSW_PU BIT(12) +#define BCMA_RES_4314_LQ_AVAIL BIT(13) +#define BCMA_RES_4314_LOGIC_RET BIT(14) +#define BCMA_RES_4314_MEM_SLEEP BIT(15) +#define BCMA_RES_4314_MACPHY_RET BIT(16) +#define BCMA_RES_4314_WL_CORE_READY BIT(17) +#define BCMA_RES_4314_ILP_REQ BIT(18) +#define BCMA_RES_4314_ALP_AVAIL BIT(19) +#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20) +#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21) +#define BCMA_RES_4314_RX_PWRSW_PU BIT(22) +#define BCMA_RES_4314_RADIO_PU BIT(23) +#define BCMA_RES_4314_VCO_LDO_PU BIT(24) +#define BCMA_RES_4314_AFE_LDO_PU BIT(25) +#define BCMA_RES_4314_RX_LDO_PU BIT(26) +#define BCMA_RES_4314_TX_LDO_PU BIT(27) +#define BCMA_RES_4314_HT_AVAIL BIT(28) +#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29) + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ diff --git a/include/linux/can/platform/flexcan.h b/include/linux/can/platform/flexcan.h deleted file mode 100644 index 72b713ab57e9..000000000000 --- a/include/linux/can/platform/flexcan.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2010 Marc Kleine-Budde <kernel@pengutronix.de> - * - * This file is released under the GPLv2 - * - */ - -#ifndef __CAN_PLATFORM_FLEXCAN_H -#define __CAN_PLATFORM_FLEXCAN_H - -/** - * struct flexcan_platform_data - flex CAN controller platform data - * @transceiver_enable: - called to power on/off the transceiver - * - */ -struct flexcan_platform_data { - void (*transceiver_switch)(int enable); -}; - -#endif /* __CAN_PLATFORM_FLEXCAN_H */ diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h index 8074a9711cf1..bb1c8096a7eb 100644 --- a/include/linux/mlx4/cmd.h +++ b/include/linux/mlx4/cmd.h @@ -111,6 +111,7 @@ enum { MLX4_CMD_INIT2INIT_QP = 0x2d, MLX4_CMD_SUSPEND_QP = 0x32, MLX4_CMD_UNSUSPEND_QP = 0x33, + MLX4_CMD_UPDATE_QP = 0x61, /* special QP and management commands */ MLX4_CMD_CONF_SPECIAL_QP = 0x23, MLX4_CMD_MAD_IFC = 0x24, diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index a51b0134ce18..52c23a892bab 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -157,7 +157,8 @@ enum { MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN = 1LL << 4, MLX4_DEV_CAP_FLAG2_TS = 1LL << 5, MLX4_DEV_CAP_FLAG2_VLAN_CONTROL = 1LL << 6, - MLX4_DEV_CAP_FLAG2_FSM = 1LL << 7 + MLX4_DEV_CAP_FLAG2_FSM = 1LL << 7, + MLX4_DEV_CAP_FLAG2_UPDATE_QP = 1LL << 8 }; enum { diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index 352eec9df1b8..262deac02c9e 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -152,6 +152,8 @@ enum { /* fl */ }; enum { /* vlan_control */ MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6, + MLX4_VLAN_CTRL_ETH_TX_BLOCK_PRIO_TAGGED = 1 << 5, /* 802.1p priority tag */ + MLX4_VLAN_CTRL_ETH_TX_BLOCK_UNTAGGED = 1 << 4, MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2, MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */ MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0 @@ -206,6 +208,40 @@ struct mlx4_qp_context { u32 reserved5[10]; }; +struct mlx4_update_qp_context { + __be64 qp_mask; + __be64 primary_addr_path_mask; + __be64 secondary_addr_path_mask; + u64 reserved1; + struct mlx4_qp_context qp_context; + u64 reserved2[58]; +}; + +enum { + MLX4_UPD_QP_MASK_PM_STATE = 32, + MLX4_UPD_QP_MASK_VSD = 33, +}; + +enum { + MLX4_UPD_QP_PATH_MASK_PKEY_INDEX = 0 + 32, + MLX4_UPD_QP_PATH_MASK_FSM = 1 + 32, + MLX4_UPD_QP_PATH_MASK_MAC_INDEX = 2 + 32, + MLX4_UPD_QP_PATH_MASK_FVL = 3 + 32, + MLX4_UPD_QP_PATH_MASK_CV = 4 + 32, + MLX4_UPD_QP_PATH_MASK_VLAN_INDEX = 5 + 32, + MLX4_UPD_QP_PATH_MASK_ETH_HIDE_CQE_VLAN = 6 + 32, + MLX4_UPD_QP_PATH_MASK_ETH_TX_BLOCK_UNTAGGED = 7 + 32, + MLX4_UPD_QP_PATH_MASK_ETH_TX_BLOCK_1P = 8 + 32, + MLX4_UPD_QP_PATH_MASK_ETH_TX_BLOCK_TAGGED = 9 + 32, + MLX4_UPD_QP_PATH_MASK_ETH_RX_BLOCK_UNTAGGED = 10 + 32, + MLX4_UPD_QP_PATH_MASK_ETH_RX_BLOCK_1P = 11 + 32, + MLX4_UPD_QP_PATH_MASK_ETH_RX_BLOCK_TAGGED = 12 + 32, + MLX4_UPD_QP_PATH_MASK_FEUP = 13 + 32, + MLX4_UPD_QP_PATH_MASK_SCHED_QUEUE = 14 + 32, + MLX4_UPD_QP_PATH_MASK_IF_COUNTER_INDEX = 15 + 32, + MLX4_UPD_QP_PATH_MASK_FVL_RX = 16 + 32, +}; + enum { /* param3 */ MLX4_STRIP_VLAN = 1 << 30 }; diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 86fde81ac2e6..7a6c396a263b 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -85,6 +85,22 @@ int netlink_attachskb(struct sock *sk, struct sk_buff *skb, void netlink_detachskb(struct sock *sk, struct sk_buff *skb); int netlink_sendskb(struct sock *sk, struct sk_buff *skb); +static inline struct sk_buff * +netlink_skb_clone(struct sk_buff *skb, gfp_t gfp_mask) +{ + struct sk_buff *nskb; + + nskb = skb_clone(skb, gfp_mask); + if (!nskb) + return NULL; + + /* This is a large skb, set destructor callback to release head */ + if (is_vmalloc_addr(skb->head)) + nskb->destructor = skb->destructor; + + return nskb; +} + /* * skb should fit one page. This choice is good for headerless malloc. * But we should limit to 8K so that userspace does not have to diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h index 1ade657d5fc1..b7174998c24a 100644 --- a/include/linux/platform_data/brcmfmac-sdio.h +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -90,6 +90,10 @@ void __init brcmfmac_init_pdata(void) * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are * used for registering the irq using request_irq function. * + * broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher align requirement + * than 32 bytes for each scatterlist item. + * * power_on: This function is called by the brcmfmac when the module gets * loaded. This can be particularly useful for low power devices. The platform * spcific routine may for example decide to power up the complete device. @@ -116,6 +120,7 @@ struct brcmfmac_sdio_platform_data { bool oob_irq_supported; unsigned int oob_irq_nr; unsigned long oob_irq_flags; + bool broken_sg_support; void (*power_on)(void); void (*power_off)(void); void (*reset)(void); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index a7393adea0b5..6b06023e8a08 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2384,6 +2384,7 @@ extern void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len); extern int skb_shift(struct sk_buff *tgt, struct sk_buff *skb, int shiftlen); +extern void skb_scrub_packet(struct sk_buff *skb); extern struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features); diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 21f702704f24..f68eaf574d7e 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -155,6 +155,7 @@ extern bool ipv6_chk_mcast_addr(struct net_device *dev, const struct in6_addr *group, const struct in6_addr *src_addr); +extern void ipv6_mc_dad_complete(struct inet6_dev *idev); /* * identify MLD packets for MLD filter exceptions */ diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index e0512aaef4b8..3c592cf473da 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -107,7 +107,6 @@ enum { HCI_MGMT, HCI_PAIRABLE, HCI_SERVICE_CACHE, - HCI_LINK_KEYS, HCI_DEBUG_KEYS, HCI_UNREGISTER, diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 7cb6d360d147..f77885ea78c2 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -117,13 +117,6 @@ struct oob_data { u8 randomizer[16]; }; -struct le_scan_params { - u8 type; - u16 interval; - u16 window; - int timeout; -}; - #define HCI_MAX_SHORT_NAME_LENGTH 10 struct amp_assoc { @@ -283,9 +276,6 @@ struct hci_dev { struct delayed_work le_scan_disable; - struct work_struct le_scan; - struct le_scan_params le_scan_params; - __s8 adv_tx_power; __u8 adv_data[HCI_MAX_AD_LENGTH]; __u8 adv_data_len; @@ -432,6 +422,7 @@ void hci_inquiry_cache_update_resolve(struct hci_dev *hdev, struct inquiry_entry *ie); bool hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data, bool name_known, bool *ssp); +void hci_inquiry_cache_flush(struct hci_dev *hdev); /* ----- HCI Connections ----- */ enum { @@ -1114,6 +1105,16 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event); BIT(BDADDR_LE_PUBLIC) | \ BIT(BDADDR_LE_RANDOM)) +/* These LE scan and inquiry parameters were chosen according to LE General + * Discovery Procedure specification. + */ +#define DISCOV_LE_SCAN_WIN 0x12 +#define DISCOV_LE_SCAN_INT 0x12 +#define DISCOV_LE_TIMEOUT msecs_to_jiffies(10240) +#define DISCOV_INTERLEAVED_TIMEOUT msecs_to_jiffies(5120) +#define DISCOV_INTERLEAVED_INQUIRY_LEN 0x04 +#define DISCOV_BREDR_INQUIRY_LEN 0x08 + int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len); int mgmt_index_added(struct hci_dev *hdev); int mgmt_index_removed(struct hci_dev *hdev); @@ -1169,10 +1170,7 @@ int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 ssp, u8 *eir, u16 eir_len); int mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, s8 rssi, u8 *name, u8 name_len); -int mgmt_start_discovery_failed(struct hci_dev *hdev, u8 status); -int mgmt_stop_discovery_failed(struct hci_dev *hdev, u8 status); int mgmt_discovering(struct hci_dev *hdev, u8 discovering); -int mgmt_interleaved_discovery(struct hci_dev *hdev); int mgmt_device_blocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); bool mgmt_valid_hdev(struct hci_dev *hdev); @@ -1212,11 +1210,6 @@ void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency, u16 to_multiplier); void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8], __u8 ltk[16]); -int hci_do_inquiry(struct hci_dev *hdev, u8 length); -int hci_cancel_inquiry(struct hci_dev *hdev); -int hci_le_scan(struct hci_dev *hdev, u8 type, u16 interval, u16 window, - int timeout); -int hci_cancel_le_scan(struct hci_dev *hdev); u8 bdaddr_to_le(u8 bdaddr_type); diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index fb94cf13c777..1a966afbbfa8 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -242,7 +242,7 @@ struct l2cap_conn_rsp { #define L2CAP_CID_SIGNALING 0x0001 #define L2CAP_CID_CONN_LESS 0x0002 #define L2CAP_CID_A2MP 0x0003 -#define L2CAP_CID_LE_DATA 0x0004 +#define L2CAP_CID_ATT 0x0004 #define L2CAP_CID_LE_SIGNALING 0x0005 #define L2CAP_CID_SMP 0x0006 #define L2CAP_CID_DYN_START 0x0040 diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 6a43c34ce96f..7b0730aeb892 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -188,6 +188,8 @@ struct ieee80211_channel { * when used with 802.11g (on the 2.4 GHz band); filled by the * core code when registering the wiphy. * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. + * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode + * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode */ enum ieee80211_rate_flags { IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, @@ -195,6 +197,8 @@ enum ieee80211_rate_flags { IEEE80211_RATE_MANDATORY_B = 1<<2, IEEE80211_RATE_MANDATORY_G = 1<<3, IEEE80211_RATE_ERP_G = 1<<4, + IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5, + IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6, }; /** @@ -433,6 +437,30 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, u32 prohibited_flags); /** + * ieee80211_chandef_rate_flags - returns rate flags for a channel + * + * In some channel types, not all rates may be used - for example CCK + * rates may not be used in 5/10 MHz channels. + * + * @chandef: channel definition for the channel + * + * Returns: rate flags which apply for this channel + */ +static inline enum ieee80211_rate_flags +ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) +{ + switch (chandef->width) { + case NL80211_CHAN_WIDTH_5: + return IEEE80211_RATE_SUPPORTS_5MHZ; + case NL80211_CHAN_WIDTH_10: + return IEEE80211_RATE_SUPPORTS_10MHZ; + default: + break; + } + return 0; +} + +/** * enum survey_info_flags - survey information flags * * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in @@ -1431,7 +1459,8 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * This structure provides information needed to complete IEEE 802.11 * authentication. * - * @bss: The BSS to authenticate with. + * @bss: The BSS to authenticate with, the callee must obtain a reference + * to it if it needs to keep it. * @auth_type: Authentication type (algorithm) * @ie: Extra IEs to add to Authentication frame or %NULL * @ie_len: Length of ie buffer in octets @@ -1469,11 +1498,10 @@ enum cfg80211_assoc_req_flags { * * This structure provides information needed to complete IEEE 802.11 * (re)association. - * @bss: The BSS to associate with. If the call is successful the driver - * is given a reference that it must release, normally via a call to - * cfg80211_send_rx_assoc(), or, if association timed out, with a - * call to cfg80211_put_bss() (in addition to calling - * cfg80211_send_assoc_timeout()) + * @bss: The BSS to associate with. If the call is successful the driver is + * given a reference that it must give back to cfg80211_send_rx_assoc() + * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new + * association requests while already associating must be rejected. * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association @@ -2342,6 +2370,7 @@ struct cfg80211_ops { * responds to probe-requests in hardware. * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX. * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call. + * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -2365,6 +2394,7 @@ enum wiphy_flags { WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19), WIPHY_FLAG_OFFCHAN_TX = BIT(20), WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), + WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), }; /** @@ -3492,11 +3522,11 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, /** * cfg80211_assoc_timeout - notification of timed out association * @dev: network device - * @addr: The MAC address of the device with which the association timed out + * @bss: The BSS entry with which association timed out. * * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_assoc_timeout(struct net_device *dev, const u8 *addr); +void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss); /** * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h index e4c5a2d2ba34..736b5fb95474 100644 --- a/include/net/if_inet6.h +++ b/include/net/if_inet6.h @@ -166,6 +166,7 @@ struct inet6_dev { struct net_device *dev; struct list_head addr_list; + int valid_ll_addr_cnt; struct ifmcaddr6 *mc_list; struct ifmcaddr6 *mc_tomb; @@ -173,10 +174,12 @@ struct inet6_dev { unsigned char mc_qrv; unsigned char mc_gq_running; unsigned char mc_ifc_count; + unsigned char mc_dad_count; unsigned long mc_v1_seen; unsigned long mc_maxdelay; struct timer_list mc_gq_timer; /* general query timer */ struct timer_list mc_ifc_timer; /* interface change timer */ + struct timer_list mc_dad_timer; /* dad complete mc timer */ struct ifacaddr6 *ac_list; rwlock_t lock; diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 44424e9dab2a..aac85534d7b5 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -56,7 +56,8 @@ struct fib_nh_exception { u32 fnhe_pmtu; __be32 fnhe_gw; unsigned long fnhe_expires; - struct rtable __rcu *fnhe_rth; + struct rtable __rcu *fnhe_rth_input; + struct rtable __rcu *fnhe_rth_output; unsigned long fnhe_stamp; }; diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index b0d982471a5c..781b3cf86a2f 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -42,6 +42,7 @@ struct ip_tunnel { struct ip_tunnel __rcu *next; struct hlist_node hash_node; struct net_device *dev; + struct net *net; /* netns for packet i/o */ int err_count; /* Number of arrived ICMP errors */ unsigned long err_time; /* Time when the last ICMP error diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 4405886980c7..f0d70f066f3d 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -197,31 +197,6 @@ ip_vs_fill_iph_skb(int af, const struct sk_buff *skb, struct ip_vs_iphdr *iphdr) } } -/* This function is a faster version of ip_vs_fill_iph_skb(). - * Where we only populate {s,d}addr (and avoid calling ipv6_find_hdr()). - * This is used by the some of the ip_vs_*_schedule() functions. - * (Mostly done to avoid ABI breakage of external schedulers) - */ -static inline void -ip_vs_fill_iph_addr_only(int af, const struct sk_buff *skb, - struct ip_vs_iphdr *iphdr) -{ -#ifdef CONFIG_IP_VS_IPV6 - if (af == AF_INET6) { - const struct ipv6hdr *iph = - (struct ipv6hdr *)skb_network_header(skb); - iphdr->saddr.in6 = iph->saddr; - iphdr->daddr.in6 = iph->daddr; - } else -#endif - { - const struct iphdr *iph = - (struct iphdr *)skb_network_header(skb); - iphdr->saddr.ip = iph->saddr; - iphdr->daddr.ip = iph->daddr; - } -} - static inline void ip_vs_addr_copy(int af, union nf_inet_addr *dst, const union nf_inet_addr *src) { @@ -405,17 +380,18 @@ enum { */ enum ip_vs_sctp_states { IP_VS_SCTP_S_NONE, - IP_VS_SCTP_S_INIT_CLI, - IP_VS_SCTP_S_INIT_SER, - IP_VS_SCTP_S_INIT_ACK_CLI, - IP_VS_SCTP_S_INIT_ACK_SER, - IP_VS_SCTP_S_ECHO_CLI, - IP_VS_SCTP_S_ECHO_SER, + IP_VS_SCTP_S_INIT1, + IP_VS_SCTP_S_INIT, + IP_VS_SCTP_S_COOKIE_SENT, + IP_VS_SCTP_S_COOKIE_REPLIED, + IP_VS_SCTP_S_COOKIE_WAIT, + IP_VS_SCTP_S_COOKIE, + IP_VS_SCTP_S_COOKIE_ECHOED, IP_VS_SCTP_S_ESTABLISHED, - IP_VS_SCTP_S_SHUT_CLI, - IP_VS_SCTP_S_SHUT_SER, - IP_VS_SCTP_S_SHUT_ACK_CLI, - IP_VS_SCTP_S_SHUT_ACK_SER, + IP_VS_SCTP_S_SHUTDOWN_SENT, + IP_VS_SCTP_S_SHUTDOWN_RECEIVED, + IP_VS_SCTP_S_SHUTDOWN_ACK_SENT, + IP_VS_SCTP_S_REJECTED, IP_VS_SCTP_S_CLOSED, IP_VS_SCTP_S_LAST }; @@ -814,7 +790,8 @@ struct ip_vs_scheduler { /* selecting a server from the given service */ struct ip_vs_dest* (*schedule)(struct ip_vs_service *svc, - const struct sk_buff *skb); + const struct sk_buff *skb, + struct ip_vs_iphdr *iph); }; /* The persistence engine object */ @@ -998,10 +975,13 @@ struct netns_ipvs { int sysctl_snat_reroute; int sysctl_sync_ver; int sysctl_sync_ports; + int sysctl_sync_persist_mode; unsigned long sysctl_sync_qlen_max; int sysctl_sync_sock_size; int sysctl_cache_bypass; int sysctl_expire_nodest_conn; + int sysctl_sloppy_tcp; + int sysctl_sloppy_sctp; int sysctl_expire_quiescent_template; int sysctl_sync_threshold[2]; unsigned int sysctl_sync_refresh_period; @@ -1044,6 +1024,8 @@ struct netns_ipvs { #define DEFAULT_SYNC_THRESHOLD 3 #define DEFAULT_SYNC_PERIOD 50 #define DEFAULT_SYNC_VER 1 +#define DEFAULT_SLOPPY_TCP 0 +#define DEFAULT_SLOPPY_SCTP 0 #define DEFAULT_SYNC_REFRESH_PERIOD (0U * HZ) #define DEFAULT_SYNC_RETRIES 0 #define IPVS_SYNC_WAKEUP_RATE 8 @@ -1080,11 +1062,26 @@ static inline int sysctl_sync_ver(struct netns_ipvs *ipvs) return ipvs->sysctl_sync_ver; } +static inline int sysctl_sloppy_tcp(struct netns_ipvs *ipvs) +{ + return ipvs->sysctl_sloppy_tcp; +} + +static inline int sysctl_sloppy_sctp(struct netns_ipvs *ipvs) +{ + return ipvs->sysctl_sloppy_sctp; +} + static inline int sysctl_sync_ports(struct netns_ipvs *ipvs) { return ACCESS_ONCE(ipvs->sysctl_sync_ports); } +static inline int sysctl_sync_persist_mode(struct netns_ipvs *ipvs) +{ + return ipvs->sysctl_sync_persist_mode; +} + static inline unsigned long sysctl_sync_qlen_max(struct netns_ipvs *ipvs) { return ipvs->sysctl_sync_qlen_max; @@ -1133,11 +1130,26 @@ static inline int sysctl_sync_ver(struct netns_ipvs *ipvs) return DEFAULT_SYNC_VER; } +static inline int sysctl_sloppy_tcp(struct netns_ipvs *ipvs) +{ + return DEFAULT_SLOPPY_TCP; +} + +static inline int sysctl_sloppy_sctp(struct netns_ipvs *ipvs) +{ + return DEFAULT_SLOPPY_SCTP; +} + static inline int sysctl_sync_ports(struct netns_ipvs *ipvs) { return 1; } +static inline int sysctl_sync_persist_mode(struct netns_ipvs *ipvs) +{ + return 0; +} + static inline unsigned long sysctl_sync_qlen_max(struct netns_ipvs *ipvs) { return IPVS_SYNC_QLEN_MAX; diff --git a/include/net/ll_poll.h b/include/net/ll_poll.h index 5bf2b3a6129e..6c06f7c0a22d 100644 --- a/include/net/ll_poll.h +++ b/include/net/ll_poll.h @@ -37,20 +37,49 @@ extern unsigned int sysctl_net_ll_poll __read_mostly; #define LL_FLUSH_FAILED -1 #define LL_FLUSH_BUSY -2 -/* we can use sched_clock() because we don't care much about precision +static inline unsigned int ll_get_flag(void) +{ + return sysctl_net_ll_poll ? POLL_LL : 0; +} + +/* a wrapper to make debug_smp_processor_id() happy + * we can use sched_clock() because we don't care much about precision * we only care that the average is bounded - * we don't mind a ~2.5% imprecision so <<10 instead of *1000 + */ +#ifdef CONFIG_DEBUG_PREEMPT +static inline u64 ll_sched_clock(void) +{ + u64 rc; + + preempt_disable_notrace(); + rc = sched_clock(); + preempt_enable_no_resched_notrace(); + + return rc; +} +#else /* CONFIG_DEBUG_PREEMPT */ +static inline u64 ll_sched_clock(void) +{ + return sched_clock(); +} +#endif /* CONFIG_DEBUG_PREEMPT */ + +/* we don't mind a ~2.5% imprecision so <<10 instead of *1000 * sk->sk_ll_usec is a u_int so this can't overflow */ static inline u64 ll_sk_end_time(struct sock *sk) { - return ((u64)ACCESS_ONCE(sk->sk_ll_usec) << 10) + sched_clock(); + return ((u64)ACCESS_ONCE(sk->sk_ll_usec) << 10) + ll_sched_clock(); } -/* in poll/select we use the global sysctl_net_ll_poll value */ +/* in poll/select we use the global sysctl_net_ll_poll value + * only call sched_clock() if enabled + */ static inline u64 ll_end_time(void) { - return ((u64)ACCESS_ONCE(sysctl_net_ll_poll) << 10) + sched_clock(); + u64 end_time = ACCESS_ONCE(sysctl_net_ll_poll); + + return end_time ? (end_time << 10) + ll_sched_clock() : 0; } static inline bool sk_valid_ll(struct sock *sk) @@ -61,7 +90,7 @@ static inline bool sk_valid_ll(struct sock *sk) static inline bool can_poll_ll(u64 end_time) { - return !time_after64(sched_clock(), end_time); + return !time_after64(ll_sched_clock(), end_time); } /* when used in sock_poll() nonblock is known at compile time to be true @@ -121,6 +150,10 @@ static inline void sk_mark_ll(struct sock *sk, struct sk_buff *skb) } #else /* CONFIG_NET_LL_RX_POLL */ +static inline unsigned long ll_get_flag(void) +{ + return 0; +} static inline u64 sk_ll_end_time(struct sock *sk) { diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a405a7a9775c..5b7a3dadadde 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -305,6 +305,7 @@ enum ieee80211_rssi_event { * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. + * @beacon_rate: associated AP's beacon TX rate * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not @@ -352,6 +353,7 @@ struct ieee80211_bss_conf { u32 sync_device_ts; u8 sync_dtim_count; u32 basic_rates; + struct ieee80211_rate *beacon_rate; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; s32 cqm_rssi_thold; diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 495bc57f292c..84e37b1ca9e1 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -115,7 +115,9 @@ struct net { #ifdef CONFIG_XFRM struct netns_xfrm xfrm; #endif +#if IS_ENABLED(CONFIG_IP_VS) struct netns_ipvs *ipvs; +#endif struct sock *diag_nlsk; atomic_t rt_genid; atomic_t fnhe_genid; diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h index 0b46fd57c8f6..e36a4aecd311 100644 --- a/include/uapi/linux/if_pppox.h +++ b/include/uapi/linux/if_pppox.h @@ -135,11 +135,11 @@ struct pppoe_tag { struct pppoe_hdr { #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ver : 4; __u8 type : 4; + __u8 ver : 4; #elif defined(__BIG_ENDIAN_BITFIELD) - __u8 type : 4; __u8 ver : 4; + __u8 type : 4; #else #error "Please fix <asm/byteorder.h>" #endif diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h index a24537725e80..29458223d044 100644 --- a/include/uapi/linux/ip_vs.h +++ b/include/uapi/linux/ip_vs.h @@ -20,6 +20,12 @@ #define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ #define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ #define IP_VS_SVC_F_ONEPACKET 0x0004 /* one-packet scheduling */ +#define IP_VS_SVC_F_SCHED1 0x0008 /* scheduler flag 1 */ +#define IP_VS_SVC_F_SCHED2 0x0010 /* scheduler flag 2 */ +#define IP_VS_SVC_F_SCHED3 0x0020 /* scheduler flag 3 */ + +#define IP_VS_SVC_F_SCHED_SH_FALLBACK IP_VS_SVC_F_SCHED1 /* SH fallback */ +#define IP_VS_SVC_F_SCHED_SH_PORT IP_VS_SVC_F_SCHED2 /* SH use port */ /* * Destination Server Flags diff --git a/include/uapi/linux/netfilter/nfnetlink_queue.h b/include/uapi/linux/netfilter/nfnetlink_queue.h index a2308ae5a73d..3a9b92147339 100644 --- a/include/uapi/linux/netfilter/nfnetlink_queue.h +++ b/include/uapi/linux/netfilter/nfnetlink_queue.h @@ -105,5 +105,7 @@ enum nfqnl_attr_config { #define NFQA_SKB_CSUMNOTREADY (1 << 0) /* packet is GSO (i.e., exceeds device mtu) */ #define NFQA_SKB_GSO (1 << 1) +/* csum not validated (incoming device doesn't support hw checksum, etc.) */ +#define NFQA_SKB_CSUM_NOTVERIFIED (1 << 2) #endif /* _NFNETLINK_QUEUE_H */ diff --git a/include/uapi/linux/netfilter/xt_socket.h b/include/uapi/linux/netfilter/xt_socket.h index 26d7217bd4f1..6315e2ac3474 100644 --- a/include/uapi/linux/netfilter/xt_socket.h +++ b/include/uapi/linux/netfilter/xt_socket.h @@ -5,10 +5,17 @@ enum { XT_SOCKET_TRANSPARENT = 1 << 0, + XT_SOCKET_NOWILDCARD = 1 << 1, }; struct xt_socket_mtinfo1 { __u8 flags; }; +#define XT_SOCKET_FLAGS_V1 XT_SOCKET_TRANSPARENT + +struct xt_socket_mtinfo2 { + __u8 flags; +}; +#define XT_SOCKET_FLAGS_V2 (XT_SOCKET_TRANSPARENT | XT_SOCKET_NOWILDCARD) #endif /* _XT_SOCKET_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ca6facf4df0c..861e5eba3953 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2758,6 +2758,8 @@ enum nl80211_channel_type { * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -2766,6 +2768,8 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_80, NL80211_CHAN_WIDTH_80P80, NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, }; /** diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index 26cbf76f8058..af0a674cc677 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -288,6 +288,7 @@ enum LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */ LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ + LINUX_MIB_XFRMACQUIREERROR, /* XfrmAcquireError */ __LINUX_MIB_XFRMMAX }; |