summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-29tegra-cpuidle: provide stub when !CONFIG_CPU_IDLEKyle McMartin
While poking at something using the for-3.12/* trees, I hit the following compile error: drivers/built-in.o: In function `tegra_pcie_map_irq': /builddir/build/BUILD/kernel-3.10.fc20/linux-3.11.0-0.rc6.git4.1.fc20.armv7hl/drivers/pci/host/pci-tegra.c:640: undefined reference to `tegra_cpuidle_pcie_irqs_in_use' drivers/built-in.o: In function `tegra_msi_map': /builddir/build/BUILD/kernel-3.10.fc20/linux-3.11.0-0.rc6.git4.1.fc20.armv7hl/drivers/pci/host/pci-tegra.c:1227: undefined reference to `tegra_cpuidle_pcie_irqs_in_use' make: *** [vmlinux] Error 1 Since our .config had CONFIG_CPU_IDLE off. We should probably provide an empty function to handle this to avoid cluttering up pci-tegra.c with conditionals. Signed-off-by: Kyle McMartin <kyle@redhat.com> Reviewed-by: Thierry Reding <treding@nvidia.com> [swarren, removed unnecessary return statement] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resourceJulia Lawall
Use devm_ioremap_resource instead of devm_request_and_ioremap. This was done using the semantic patch scripts/coccinelle/api/devm_ioremap_resource.cocci Error-handling code was manually removed from the associated calls to platform_get_resource. Adjust the comment at the third platform_get_resource_byname to make clear why ioremap is not done at this point. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort listThierry Reding
The ARCH_SUPPORTS_MSI symbol was removed during the recent patches that introduce the MSI chip infrastructure. Drop it from the list of selected symbols. While at it, move the MIGHT_HAVE_PCI symbol so the list stays sorted alphabetically. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29Merge tag 'dt-3.12' of git://git.infradead.org/linux-mvebu into next/socOlof Johansson
From Jason Cooper: mvebu dt changes for v3.12 - kirkwood - add ZyXEL NSA310 board, fan for ReadyNAS Duo v2 - mvebu - add ReadyNAS 102 board - misc dts updates and changes. v2: - dropped mv64xxx-i2c change * tag 'dt-3.12' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix the Armada 370/XP timer compatible strings ARM: mvebu: use dts pre-processor for readynas 102 ARM: kirkwood: use dts pre-processor for nsa310 boards ARM: mvebu: use correct #interrupt-cells instead of #interrupts-cells ARM: Kirkwood: Add support for another ZyXEL NSA310 variant ARM: mvebu: Add Netgear ReadyNAS 102 board arm: kirkwood: readynas duo v2: Add GMT G762 Fan Controller Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/boot/dts/kirkwood-nsa310.dts
2013-08-23Merge tag 'mxs-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/soc From Shawn Guo: It contains mxs soc changes for 3.12. - Run savedefconfig on mxs_defconfig to clean it up - Fix on mxs_restart() routine for interrupt context calling - A few other random updates and cleanups * tag 'mxs-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: pm: Include "pm.h" ARM: mxs: Simplify detection of CrystalFontz boards ARM: mach-mxs: Remove "TO" string from revision field ARM: mxs: Fix BUG() when invoking mxs_restart() from interrupt context ARM: mxs: Allow DT clock providers ARM: mxs_defconfig: Cleanup mxs_defconfig
2013-08-23Merge tag 'imx-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/soc From Shawn Guo: It contains the imx device tree updates for 3.12. - New pinctrl entry additions for various peripherals - Devices enabling for imx6, imx5 and imx27 boards - Add missing device nodes like iim, owire, audmux and sram, etc. - Various updates on boards like phytec, wandboard and sabresd - Consolidate pad macros between imx6q and imx6dl * tag 'imx-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: (92 commits) ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ARM: dts: i.MX27: Increase "clock-latency" value ARM: dts: i.MX27: Add label to CPU node ARM: dts: i.MX27: Remove optional "ptp" clock source for FEC ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-23Merge tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/soc From Shawn Guo: It contains a bunch of imx soc updates for 3.12. - Add more ethernet phy fixups for imx6 boards - Add some missing imx6q clocks into clock driver - Add new clock types fixup mux and div to work around some ugly hardware defect - Consolidate L2 cache initialization function, so that it can be used on more i.MX SoCs - Replace magic numbers in mach-imx6q.c with well defined macros - Small fixes for imx6q and pllv3 clock drivers - Some random updates on imx defconfig files * tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: (33 commits) phy: micrel: Add definitions for common Micrel PHY registers ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option ARM: imx: Move anatop related from board file to anatop driver ARM: imx_v6_v7_defconfig: Enable wireless support ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig ARM: imx_v6_v7_defconfig: Add SATA support ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig ARM: mx53: Allow suspend/resume ARM: mach-imx: Select ARM_CPU_SUSPEND at ARCH_MXC level ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAX ARM: imx6q: add vdoa gate clock ARM: imx6q: add the missing cko output selection ARM: imx6q: add cko2 clocks ARM: imx6q: add spdif gate clock ARM: imx: clk-pllv3: improve the timeout waiting method ARM: imx6: change some clocks to fixup clocks ARM: imx: add common clock support for fixup mux ARM: imx: add common clock support for fixup div ARM: imx: Select MIGHT_HAVE_CACHE_L2X0 ARM: imx: fix imx_init_l2cache storage class ...
2013-08-23Merge tag 'imx-weim-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/soc From Shawn Guo: This is a patch series that updates imx-weim bus driver to have it support more i.MX SoCs. Because there is no maintainer for drivers/bus so far, I'm forwarding it through IMX tree for 3.12 merge window. * tag 'imx-weim-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: drivers: bus: imx-weim: Add support for i.MX1/21/25/27/31/35/50/51/53 drivers: bus: imx-weim: Add missing platform_driver.owner field drivers: bus: imx-weim: use module_platform_driver_probe() drivers: bus: imx-weim: Simplify error path drivers: bus: imx-weim: Remove private driver data
2013-08-22Merge tag 'davinci-for-v3.12/dt' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc From Sekhar Nori: DaVinci DT updates for v3.12 ---------------------------- This set of patches add ethernet DT nodes for DA850 and also remove now unneeded specification of UART clock frequency so kernel can now boot irrespective of what the bootloader setting of UART frequency is. * tag 'davinci-for-v3.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850: do not specify clock_frequency for UART DT node ARM: davinci: da850: add DT node for ethernet ARM: davinci: da850: add OF_DEV_AUXDATA entry for davinci_emac ARM: davinci: da850: add OF_DEV_AUXDATA entry for mdio. ARM: davinci: da850: add DT node for mdio device Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-22Merge tag 'davinci-for-v3.12/soc' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc From Sekhar Nori: DaVinci SoC updates for v3.12 ----------------------------- This set of SoC updates contains changes to the way UART clock is handled to enabled DT-boot to obtain UART clock frequency instead of relying on DT-binding being supplied. Similarly handling of MDIO clock is fixed to make it easier to support MDIO in DT-boot. Finally there is patch to remove now unnecessary setting of wake-up capable flag for RTC. * tag 'davinci-for-v3.12/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: fix clock lookup for mdio device ARM: davinci: da8xx: remove hard coding of rtc device wakeup ARM: davinci: serial: remove davinci_serial_setup_clk() ARM: davinci: serial: get rid of davinci_uart_config ARM: davinci: da8xx: remove da8xx_uart_clk_enable ARM: davinci: uart: move to devid based clk_get Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-22Merge tag 'ux500-core-for-arm-soc' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc From Linus Walleij: Core ux500 changes for v3.12: - Add support for restart using the PRCMU - Move secondary startup out of INIT section - set coherent_dma_mask for DMA40 * tag 'ux500-core-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: set coherent_dma_mask for dma40 ARM: ux500: remove u8500_secondary_startup from INIT section. ARM: ux500: add restart support via prcmu
2013-08-22ARM: dts: vf610-twr: enable i2c0 deviceJingchang Lu
enable i2c0 device on Vybrid VF610 Tower Board Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add one more I2C2 pinmux entryAlexander Shiyan
This adds one more I2C2 alternate pinmux entry. GPIO1_2 <=> SCL GPIO1_3 <=> SDA Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Move pins configuration under "iomuxc" labelAlexander Shiyan
This unmix module/pin definitions and reduce indentation for pin groups, so makes template a bit cleaner. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hogPeter Chen
USB OTG vbus pin needs to be configured as gpio function at sabresd board. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulatorPeter Chen
We enabled USB host 1, so host 1's vbus should be on to let host 1 work. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27-phytec-phycore-som: Enable AUDMUXAlexander Shiyan
Patch adds AUDMUX routing for Phytec PCM-038 module. This route i.MX SSI0 (Port 1) to the slave port 4 where MC13783 codec interface is connected. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Disable AUDMUX in the templateAlexander Shiyan
AUDMUX expects additional parameters to be configured correctly, so turn it off into a template. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: wandboard: Add support for SDIO bcm4329Tony Prisk
The wandboard has a Broadcom 4329 WiFi connected via SDIO. This patch sets the required pins to enable the wifi module. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 templateAlexander Shiyan
External high frequency clock CKIH1 is optional for i.MX51, so move it setup into boards where it is used. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx53-qsb: Make USBH1 functionalFabio Estevam
mx53qsb uses GPIO7_8 to turn on VBUS, so add support for it. Also specify the PHY type in the device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 ↵Philipp Zabel
Ouad module This patch enables I2C1 and adds device tree nodes for the EEPROM and the DA9063 PMIC connected to this I2C bus. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad modulePhilipp Zabel
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6qdl-sabresd: Add touchscreen supportFabio Estevam
mx6 sabresd boards have a egalax touchscreen controller connected via I2C3. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx: add ocram clock for imx53Shawn Guo
Add missing ocram gate clock for imx53 and also represent it in device tree ocram node. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: ocram size is different between imx6q and imx6dlShawn Guo
The ocram on imx6q is 256 KiB while on imx6dl it's 128 KiB. Let's have separate node for imx6q and imx6dl. It also changes imx6q size 0x3f000 to 0x40000 to match the hardware. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Liu Ying <Ying.Liu@freescale.com>
2013-08-22ARM: dts: imx27-phytec-phycore-som: Fix regulator settingsAlexander Shiyan
Outputs regulator SW1A and SW1A, SW2A and SW2B are connected together, so it determined as "joined" operation for MC13783. Separate work of these outputs in this case would be wrong, so we define only one of the outputs. Additionally, define the full range of voltages for the CPU (1.2v - 1.52v). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Remove clock name from CPU nodeAlexander Shiyan
Clock name is not needed for "cpufreq-cpu0". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Increase "clock-latency" valueAlexander Shiyan
i.MX27 CPU can be clocked with a 32 kHz quartz, and not just 32768 Hz, so increase "clock-latency" value, which will ensure that we use two clock cycles on frequency change. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add label to CPU nodeAlexander Shiyan
Add a label to i.MX27 CPU node. This change allows the reuse this node in the upper levels of the DTS. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Remove optional "ptp" clock source for FECAlexander Shiyan
Patch removes optional "ptp" clock source for FEC. This clock is missing in i.MX27. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Using "wdog_ipg_gate" clock source for watchdogAlexander Shiyan
Patch replaces "dummy" clock source for watchdog with "wdog_ipg_gate". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6qdl-sabresd: Allow buttons to wake-up the systemFabio Estevam
This is useful for testing suspend/resume sequence. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx6q: remove board specific CLKO setupShawn Guo
The CLKO is widely used by imx6q board designs to clock audio codec. Since most codecs accept 24 MHz frequency, let's initially set up CLKO with OSC24M (cko <-- cko2 <-- osc). Then those board specific CLKO setup for audio codec can be removed. The board dts files also need an update on cko reference in codec node. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: use generic DMA bindings for SSI nodesShawn Guo
Updates SSI nodes to adopt generic DMA bindings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: add LVDS panel for imx6qdl-sabresdShawn Guo
Add HannStar HSD100PXN1 XGA panel support on LVDS1 port of imx6qdl-sabresd board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6q-wandboard: Add sata supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6: Add support for imx6q wandboardFabio Estevam
Add support for the imx6q wanboard variant. Since imx6q/dl are pin to pin compatible, introduce the imx6qdl-wandboard.dtsi file that contains the common peripheral nodes. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: add tempmon node for imx6q thermal supportShawn Guo
Mark ocotp as a syscon node and add tempmon for imx6q thermal support. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: remove old DMA binding data from gpmi nodeShawn Guo
After mxs-dma driver adopts generic DMA device tree binding, gpmi channel interrupt number is defined in DMA controller node, and channel ID is listed in "dmas" property. So the DMA channel interrupt number in gpmi node "interrupts" property and fsl,gpmi-dma-channel which are used by old customized DMA binding can be removed now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-08-22ARM: dtsi: enable ahci sata on imx6q platformsRichard Zhu
Only imx6q has the ahci sata controller, enable it on imx6q platforms. Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add core voltagesAlexander Shiyan
This patch adds core voltages for i.MX27 CPUs. Only 266 and 400 MHz modes is documented in the datasheet, so we add a 266 MHz frequency for conform this. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add WEIM nodeAlexander Shiyan
This patch adds the missing (Wireless External Interface Module) WEIM devicetree node for i.MX51 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6dl-wandboard: Add support for UART3Fabio Estevam
Wandboard has a bluetooth device connected to UART3, so add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6dl-wandboard: Add SDHC1 and SDHC2 portsFabio Estevam
Wandboard has a SD card slot on the baseboard connected to SDHC1 and a BCM4329 (Wifi + Bluetooth chip) connected to SDHC2. Add support for these ports. While at it, provide the card detect gpio on SDHC3 and also fix indentation on MX6QDL_PAD_GPIO_0__CCM_CLKO1 hog pin. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6qdl.dtsi: Add another uart3 pin groupFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6qdl.dtsi: Add usdhc1 pin groupsFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6qdl/imx6sl: add the dma property for uartHuang Shijie
Add the dma property for all the uart. Note: Add the dma property does not mean we enable the dma for this uart. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx25: Make lcdc compatible to imx21 fbMatthias Weisser
Make lcdc compatible to imx21 fb. Signed-off-by: Matthias Weisser <weisserm@arcor.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6qdl: add a new pinctrl for uart3Huang Shijie
Add the a new pinctrl for uart3. In the imx6q{dl}-sabreauto boards, the uart3 is used for Bluetooth. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-09-05 17:03:41 +0000