summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2016-02-17i40e: Refactor force_wb and WB_ON_ITR functionality codeAnjali Singhai Jain
Now that the Force-WriteBack functionality in X710/XL710 devices has been moved out of the clean routine and into the service task, we need to make sure WriteBack-On-ITR is separated out since it is still called from clean. In the X722 devices, Force-WriteBack implies WriteBack-On-ITR but without the interrupt, which put the driver into a missed interrupt scenario and a potential tx-timeout report. With this patch, we break the two functions out, and call the appropriate ones at the right place. This will avoid creating missed interrupt like scenarios for X722 devices. Also update copyright year in file headers. Change-ID: Iacbde39f95f332f82be8736864675052c3583a40 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: use new add_veb calling with VEB stats controlShannon Nelson
The new parameters for add_veb allow us to enable and disable VEB stats, so let's use them. Update copyright year. Change-ID: Ie6e68c68e2d1d459e42168eda661051b56bf0a65 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: add VEB stat control and remove L2 cloud filterShannon Nelson
With the latest firmware, statistics gathering can now be enabled and disabled in the HW switch, so we need to add a parameter to allow the driver to set it as desired. At the same time, the L2 cloud filtering parameter has been removed as it was never used. Older drivers working with the newer firmware and newer drivers working with older firmware will not run into problems with these bits as the defaults are reasonable and there is no overlap in the bit definitions. Also, newer drivers will be forced to update because of the change in function call parameters, a reminder that the functionality exists. Also update copyright year. Change-ID: I9acb9160b892ca3146f2f11a88fdcd86be3cadcc Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: set shared bit for multicast filtersShannon Nelson
Add the use of the new Shared MAC filter bit for multicast and broadcast filters in order to make better use of the filters available from the device. The FW folks have assured me that setting this bit on older FW will have no affect, so we don't need a version check. Also fixed a stray indent problem nearby. Also update copyright year. Change-ID: I4c5826a32594382a7937a592a24d228588cee7aa Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: Make the DCB firmware checks for X710/XL710 onlyNeerav Parikh
Make the DCB firmware version related checks specific to X710 and XL710 only. These checks are not required for X722 family of devices. Introduced an inline routine to help determine if the MAC type is X710/XL710 or not. Moved the firmware version related checks in i40e_sw_init() and defined flags for different cases Fix the version check to allow using "Set LLDP MIB" AQ for beyond FVL4 FW releases. Change-ID: Ib78288343de983aa0354fc28aa36e99b073662c0 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: move sync_vsi_filters up in service_taskJesse Brandeburg
The sync_vsi_filters function is moved up in the service_task because it may need to request a reset, and we don't want to wait another round of service task time. NOTE: Filters will be replayed by sync_vsi_filters including broadcast and promiscuous settings. Also, added some error handling in this space in case any of these fail the driver will retry correctly. Also update copyright year. Change-ID: I23f3d552100baecea69466339f738f27614efd47 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: use eth_platform_get_mac_address()Sowmini Varadhan
This commit converts commit b499ffb0a22c ("i40e: Look up MAC address in Open Firmware or IDPROM") to use eth_platform_get_mac_address() added by commit c7f5d105495a ("net: Add eth_platform_get_mac_address() helper.") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: add priv flag for automatic rule evictionAnjali Singhai Jain
The X722 can support automatic rule eviction for automatically added flow director rules. Feature is (should be) disabled by default. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: Enable Geneve offload for FW API ver > 1.4 for XL710/X710 devicesAnjali Singhai
This patch makes sure we check the GENEVE offload capable flag before we attempt offload. It also enables the Capability for XL710/X710 devices with FW API version higher than 1.4 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e/i40evf: bump version to 1.4.12/1.4.8Jesse Brandeburg
Bump driver versions to i40e-1.4.12 and i40evf-1.4.8 Change-ID: I0ad82668c4ded04250391fda396ce191a42ab754 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: avoid large memcpy by assigning structJacob Keller
Assign the i40e_pf structure directly instead of using a large memcpy, which avoids a sparse warning and lets the compiler optimize the copy since it knows the size of the structure in advance. Change-ID: I17604e23be2616521eb760290befcb767b52b3f7 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: count allocation errorsJesse Brandeburg
Driver already counted allocation errors, so print them as part of the ethtool -S output. Useful for debugging if your system is having trouble making memory available for the driver. Change-ID: I83839fa86e81e6d80f03b917c88dd3ef9a64dde0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: drop unused functionJesse Brandeburg
Delete the unused irq_dynamic_disable function. Change-ID: Ia46071066babd121c7c90f141b6210b00078de3f Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Anjali Singhai <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: negate PHY int mask bitsShannon Nelson
The PHY interrupt mask bits mask out the events we don't want, so we need to negate the bitmask of events we want. Change-ID: I273244da5a8d285b6abc84fd68a90f1e6fa0393e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: APIs to Add/remove port mirroring rulesKiran Patil
This patch implements necessary functions related to port mirroring features such as add/delete mirror rule, function to set promiscuous VLAN mode for VSI if mirror rule_type is "VLAN Mirroring". Change-ID: Iaf513fd5f188f99dcb977b48f99e73185dfddc40 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: fix: do not sleep in netdev_opsJesse Brandeburg
The driver was being called by VLAN, bonding, teaming operations that expected to be able to hold locks like rcu_read_lock(). This causes the driver to be held to the requirement to not sleep, and was found by the kernel debug options for checking sleep inside critical section, and the locking validator. Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Nelson, Shannon <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: allocate memory saferJesse Brandeburg
The sync_vsi_filter function was allocating memory in such a way that it could sleep (GFP_KERNEL) which was causing a problem when called by the team driver under rcu_read_lock(), which cannot be held while sleeping. Found with lockdep. Change-ID: I4e59053cb5eedcf3d0ca151715be3dc42a94bdd5 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: do TSO only if CHECKSUM_PARTIAL is setShannon Nelson
Don't bother trying to set up a TSO if the skb->ip_summed is not set to CHECKSUM_PARTIAL. Change-ID: I6495b3568e404907a2965b48cf3e2effa7c9ab55 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: fix bug in dma syncJesse Brandeburg
Driver was using an offset based off a DMA handle while mapping and unmapping using sync_single_range_for[cpu|device], where it should be using DMA handle (returned from alloc_coherent) and the offset of the memory to be sync'd. Change-ID: I208256565b1595ff0e9171ab852de06b997917c6 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Nelson, Shannon <shannon.nelson@intel.com> Reviewed-by: Williams, Mitch A <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: trivial: fix missing spaceJesse Brandeburg
Missing space in comment, fixed. Change-ID: I8cdf3ce5994b4a97dcc3eeb33422533918546667 Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: trivial: drop duplicate definitionJesse Brandeburg
The probe routine already had a u32 val declared, no need to do it again. Found by W=2 compile. Change-ID: Id7b65f6d0ef6bb71067d0557f5be0202b6d8741e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-02-16 This series contains updates to i40e/i40evf only. Shannon adds flags to MAC allocation requests to signify that the MAC VLAN filters should come from the shared resource pool. Added a new "set switch config" admin queue command and the new Cisco VXLAN-GPE cloud tunnel type for the admin queue commands. Added more detail to the NVM update debug message in order to see the full ethtool request data. Also added a few more bits of netdev data into the debugfs output for dump VSI. Pandi fixes the width of two datatypes which were being declared a different size from what they are assigned. Anjali fixes an issue where we were not doing write-back on interrupt throttle for legacy case in x722. Mitch adds a counter for ARQ overflows since sometimes an ever-growing number indicates that something bad is happening. Also added 20G speed for Tx bandwidth calculations. Jesse refactors the DCB function based on a community suggestion to change the multi-level if statement into a switch statement. Cleans up VF device IDs in the PF, since it does not need to know them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: rework setup_tc ndo op to consume general tc operandJohn Fastabend
This patch updates setup_tc so we can pass additional parameters into the ndo op in a generic way. To do this we provide structured union and type flag. This lets each classifier and qdisc provide its own set of attributes without having to add new ndo ops or grow the signature of the callback. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: rework ndo tc op to consume additional qdisc handle parameterJohn Fastabend
The ndo_setup_tc() op was added to support drivers offloading tx qdiscs however only support for mqprio was ever added. So we only ever added support for passing the number of traffic classes to the driver. This patch generalizes the ndo_setup_tc op so that a handle can be provided to indicate if the offload is for ingress or egress or potentially even child qdiscs. CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16i40e/i40evf: Bump i40e to 1.4.11 and i40evf to 1.4.7Catherine Sullivan
Bump. Change-ID: I21aa520a3c8c5f4f562a98019bf8b76b3706c480 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: trivial: remove unnecessary local varJesse Brandeburg
Probe routine already has too many locals, just convert one used for kzalloc into a kcalloc, eliminating the local. Change-ID: I349049872b71f858cbeb91ad7836e6767fc7b7d1 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Anjali Singhai <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: remove VF device IDs from PFJesse Brandeburg
The PF doesn't need to know about the VF's device IDs, so remove them. Change-ID: I62cf0e0fffa1ace586e58e00bc271b10ae440f05 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add netdev info to VSI dumpShannon Nelson
Add a few more bits of netdev data into the debugfs output for dump VSI. For now, we'll add the features, hw_features, vlan_features, and flags bitflags and the state. More could be added later if needed. Also, tweak a couple nearby output lines for output readability. Change-ID: I9fb5a9da75c9ad7679498ce9ac3ba24d065ddd2e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Reviewed-by: Brandeburg, Jesse <jesse.brandeburg@intel.com> Reviewed-by: Wyborny, Carolyn <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add a little more to an NVM update debug messageShannon Nelson
Add a little more detail to an NVM update debug message in order to see the full ethtool request data. Change-ID: Iab10437cb32d6fddc67ee347e7c0b42511e152cd Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: refactor DCB functionJesse Brandeburg
This is a simple refactor suggested by the community to change a multi-level if statement into a switch. Change-ID: I831cf3c40426022220aa9b43990022d22dfd50db Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add 20G speed for Tx bandwidth calculationsMitch Williams
When calculating TX bandwidth for VFs, we need to know the link speed to make sure we don't allocate more bandwidth than is available. Add 20G link speed to the switch statement so we can support devices that link at that speed. Change-ID: I5409f6139d549e5832777db9c22ca0664e0c5f8b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add counter for arq overflowsMitch Williams
Sometimes, ARQ overflows are a big deal and tell us that the firmware/hardware/driver/something is having problems. But normally they're no big deal. To assist in assessing this, add a counter to our Ethtool stats. A handful of ARQ overflows during VF init is no problem. A large, ever-growing number indicates that Something Bad is happening. Change-ID: Ie5348bfbc8a54a890559cb00279c28d976a55096 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: fix write-back-on-itr to work with legacy itrAnjali Singhai Jain
We were not doing write-back on interrupt throttle for Legacy case in X722. This patch fixes that, so we do WB_ON_ITR for Legacy as well. Plus the issue that we should still be setting NO_ITR if we are touching the DYN_CTLN register since we do not want to change ITR setting here. Change-ID: I5db8491ee1544118a389db839cecc93e1bbc480e Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: Store lan_vsi_idx and lan_vsi_id in the right sizePandi Maharajan
lan_vsi_idx and lan_vsi_id are assigned to u16 data sized variables but declared in u8. This patch fixes the width of the datatype. Change-ID: If4bcbcc7d32f2b287c51cb33d17879691258dce2 Signed-off-by: Pandi Kumar Maharajan <pandi.maharajan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: Bump AQ minor version to 1.5 for new FW featuresShannon Nelson
Bump AQ minor version to 1.5 for new FW features. Change-ID: I5a790f7f519a2a8921aaa1c5663727dd1897ffec Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ thermal sensor control structShannon Nelson
Add the new AQ command and struct for managing a thermal sensor. Change-ID: I6f5631839a0f3dca352a6c222f1269a960e2310a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ Add VXLAN-GPE tunnel typeShannon Nelson
Add the new Cisco VXLAN-GPE cloud tunnel type for the Add Cloud Filter and UDP tunnel AQ commands. Change-ID: I2c093c7d79726c7fca08a36e5c63581a905da3d2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ Add set_switch_configShannon Nelson
Add the new Set Switch Config AdminQ command, and mark the L2 Filter bit as deprecated in the Add VEB command. Change-ID: I5b24790f14c56f0ddf3f70df1e486844146b039f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ Shared resource flagsShannon Nelson
Add flags to MAC allocation requests to signify that the MAC VLAN filters should come from the shared resource pool rather than the dedicated PF resource pools. Change-ID: I4c2da64c01856edcb0982bc4aab75c5a91047a7a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: add 100Mb ethtool reportingCatherine Sullivan
Add some missing reporting/advertisement of 100Mb capability for adapters that support it. Change-ID: I8b8523fbdc99517bec29d90c71b3744db11542ac Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: AQ Add external power class to get link statusShannon Nelson
Add the new External Device Power Ability field to the get_link_status data structure, using space from the reserved field at the end of the struct. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: AQ Geneve cloud tunnel typeShannon Nelson
Fix the name of the new cloud tunnel type from the place-holder NGE name to the official Geneve. Also fix the spelling of the VXLAN type. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-02-03i40e: AQ Add Run PHY Activity structShannon Nelson
Add the AQ opcode and struct definitions for the Run PHY Activity command Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: Limit DCB FW version checks to X710/XL710 devicesGreg Bowers
X710/XL710 devices require FW version checks to properly handle DCB configurations from the FW. Newer devices do not, so limit these checks to X710/XL710. Signed-off-by: Greg Bowers <gregory.j.bowers@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: add new proxy-wol bit for X722Shannon Nelson
Add the new proxy-wake-on-lan capability bit available with the new X722 device. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e/i40evf: Use private workqueueJesse Brandeburg
As done per ixgbe, use a private workqueue to avoid blocking the system workqueue. This avoids some strange side effects when some other entity is depending on the system work queue. Change-ID: Ic8ba08f5b03696cf638b21afd25fbae7738d55ee Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40evf: add new write-back modeAnjali Singhai Jain
Add write-back on interrupt throttle rate timer expiration support for the i40evf driver, when running on X722 devices. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e/i40evf: Fix for UDP/TCP RSS for X722Anjali Singhai Jain
The PCTYPES for the X710 and X722 families are different. This patch makes adjustments for that. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: Extend ethtool RSS hooks for X722Anjali Singhai Jain
This patch adds another way to access the RSS keys and lut using the AQ for X722 devices. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: add new device IDs for X722Anjali Singhai Jain
Add the KX and QSFP device IDs for X722. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>