summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2016-05-04ixgbe: Disable DCB and FCoE for X550EM_x and x550em_aUsha Ketineni
This patch adds IXGBE_FLAG_DCB_CAPABLE flag that is set for all MACs other than X550EM_x and x550em_a. DCB and FCoE is disabled for these MACS. DCB initialization code is moved to a separate function. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Ronald Bynoe <ronald.j.bynoe@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Use mac_ops instead of trying to identify NIC typeAlexander Duyck
This change makes it so that we can just use function pointers instead of having to identify if a given VF is running on a Linux or Windows PF. By doing this we can avoid having to pull too much information out of the lower layers and can instead just make use of the mac_ops pointers since they should differ between the two types of VFs anyway. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Change the relaxed order settings in VF driver for sparcBabu Moger
We noticed performance issues with VF interface on sparc compared to PF. Setting the RX to IXGBE_DCA_RXCTRL_DATA_WRO_EN brings it on far with PF. Also this matches to the default sparc setting in PF driver. Signed-off-by: Babu Moger <babu.moger@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Revise populating few registers and macro definitionsPreethi Banala
Revise populating few registers in ixgbe_get_regs() and macro definitions. Before applying patch: $ du -k objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko 8572 objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko After applying patch: $ du -k objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko 8568 objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Return 64 bit stats valuesPreethi Banala
The code was ignoring higher 32 bits of stats registers. This patch correctly fills out 64 bit value in two 32 bit words. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Remove duplicate and unused device ID definitionsPreethi Banala
Remove duplicate and unused device ID definitions. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: check EEPROM for WOL support for X540 and aboveEmil Tantilov
This change aims to simplify the logic we use to determine WOL support by reading the EEPROM bits for MACs X540 and newer. Also some cleanups in ixgbe_wol_supported() - changed return type to bool and removed redundant return variable by simply using return after the checks. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: add WoL support for some 82599 subdevice IDsEmil Tantilov
We had some 82599 subdevice IDs missing from the list of parts that support WoL. Reported-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Support Windows hosts (Hyper-V)KY Srinivasan
On Hyper-V, the VF/PF communication is a via software mediated path as opposed to the hardware mailbox. Make the necessary adjustments to support Hyper-V. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Add the device ID's presented while running on Hyper-VKY Srinivasan
Intel SR-IOV cards present different ID when running on Hyper-V. Add the device IDs presented while running on Hyper-V. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Match on multiple headers for cls_u32 offloadsAmritha Nambiar
Adds support to set filters with multiple header fields (L3,L4)to match on. This is achieved in the following order: 1. Create a leaf hash table for the next header. 2. Create a link to the leaf hash table from the base hash table with matches on next header type and current header fields. 3. Add filter in leaf hash table with match on next header fields and action. Verified with the following filters : Match TCP and DIP: handle 1: u32 divisor 1 u32 ht 800: order 1 link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip protocol 6 ff match ip dst 10.0.0.1/32 match tcp src 28 ffff action drop Delete the filter: Match on DIP, SIP, UDP (SPort, DPort): handle 2: u32 divisor 1 u32 ht 800: order 2 link 2: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip dst 15.0.0.2/32 match ip protocol 17 ff \ match ip src 15.0.0.1/32 match udp src 30 ffff match udp dst 32 ffff action drop Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Add support for redirect action to cls_u32 offloadsSridhar Samudrala
This patch enables 'redirect' to a SRIOV VF or a offloaded macvlan device queue via tc 'mirred' action. Verified with the following script that creates SRIOV VFs, offloaded macvlan and adds tc u32 filters with redirect action to the associated netdevs. # add ingress qdisc. tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # create 4 sriov VFs and bring up the first one. echo 4 > /sys/class/net/p4p1/device/sriov_numvfs sleep 1 ip link set p4p1 up ip link set p4p1_0 up # create a offloaded macvlan device and bring it up. ethtool -K p4p1 l2-fwd-offload on ip link add link p4p1 name mvlan_1 type macvlan ip link set mvlan_1 up # add u32 filter with action to redirect to VF netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip src 192.168.1.3/32 \ action mirred egress redirect dev p4p1_0 # add u32 filter with action to redirect to macvlan netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip src 192.168.2.3/32 \ action mirred egress redirect dev mvlan_1 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e/i40evf: Add support for GSO partial with UDP_TUNNEL_CSUM and GRE_CSUMAlexander Duyck
This patch makes it so that i40e and i40evf can use GSO_PARTIAL to support segmentation for frames with checksums enabled in outer headers. As a result we can now send data over these types of tunnels at over 20Gb/s versus the 12Gb/s that was previously possible on my system. The advantage with the i40e parts is that this offload is mostly transparent as the hardware still deals with the inner and/or outer IPv4 headers so the IP ID is still incrementing for both when this offload is performed. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40evf: make use of BIT() macro to avoid signed left shiftJacob Keller
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: make use of BIT() macro to prevent left shift of signed valuesJacob Keller
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e/i40evf: fix I40E_MASK signed shift overflow warningsJacob Keller
GCC 6 has a new warning which will display when you attempt to left shift a signed value beyond the storage size of the type. I40E_MASK generates a mask value for 32bit registers. Properly typecast the mask value and place the values in parenthesis to prevent macro expansion issues. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e/i40evf : Bump driver version from 1.5.5 to 1.5.10Harshitha Ramamurthy
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Update device ids for X722Catherine Sullivan
Add a device ID for X722. Change-Id: I574f2345ab341de98a6a1c212d0603af853e48b0 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Drop extra copy of functionJesse Brandeburg
i40e_release_rx_desc was in two files, but was only used and needed in txrx.c. Get rid of the extra copy. Change-Id: I86e18239aa03531fc198b6c052847475084a9200 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Use consistent type for vf_idJesse Brandeburg
The driver was all over the place using signed or unsigned types for vf_id, when it should always be signed. This fixes warnings of type unsafe comparisons from gcc with W=2. Change-Id: I2cb681f83d0f68ca124d2e4131e4ac0d9f8a6b22 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: PTP - avoid aggregate return warningsJesse Brandeburg
Aggregate return warnings are when struct types are returned and must be copied to the lvalue with a struct copy by the compiler. This fixes warnings of type aggregate-return from gcc with W=2. Change-Id: I896b1bf514544bf0faeb458869d79914b9f1b168 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Fix uninitialized variableCatherine Sullivan
We have an uninitialized variable warning for valid_len for one case in validate_vf_mesg. To fix this, just initialize it to 0 at the top of the function and remove all of the now redundant assignments to 0 in the individual cases. Change-Id: Iacbd97f4c521ed8d662eef803a598d8707708cfd Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40evf: RSS Hash Option parametersCarolyn Wyborny
This patch syncs the VF code for the changes made to the PF for the RSS hash tuple settings. Since the VF still cannot change the RSS hash settings, change the code to make this clear to the user. Previously, the default settings were returned in this function. However, the default can be changed by the PF so this does not make sense anymore. Change-Id: I085eaf005fc7978b440d2a1bf2b2dd7cadaff39b Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Remove HMC AQ API implementationNeerav Parikh
Remove the code that implements the HMC AQ APIs and call these APIs. This is done because these are obsolete APIs and are not supported by firmware. Change-ID: I5d771d8f37c3e16e7b0a972ff9b27e75aa2d05d4 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Prevent falling to promiscuous if the VF is not trustedAnjali Singhai Jain
With this change a non trusted VF can never fall to promiscuous mode when there is no room for a MAC/VLAN filter. Change-Id: I8a155aa25c0bcdc6093414920c9ade4ee0bd20e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Limit the number of MAC and VLAN addresses that can be added for VFsAnjali Singhai Jain
If the VF is privileged/trusted it can do as it may please including but not limited to hogging resources and playing unfair. But if the VF is not privileged/trusted it still can add some number (8) of MAC and VLAN addresses. Other restrictions with respect to Port VLAN and normal VLAN still apply to not privileged/trusted VF. Change-Id: I3a9529201b184c8873e1ad2e300aff468c9e6296 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Change the default for VFs to be not privilegedAnjali Singhai Jain
Make sure a VF is not trusted/privileged until its explicitly set for trust through the new NDO op interface. Change-Id: I476385c290d2b4901d8fceb29de43546accdc499 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40evf: Add driver support for promiscuous modeAnjali Singhai Jain
Add necessary Linux Ethernet driver support for promiscuous mode operation. Add a flag so the VF knows it is in promiscuous mode and two state flags to discreetly track multicast and unicast promiscuous states. Change-Id: Ib2f2dc7a7582304fec90fc917ebb7ded21ba1de4 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Add VF promiscuous mode driver supportAnjali Singhai Jain
Add infrastructure for Network Function Virtualization VLAN tagged packet steering feature. Change-Id: I9b873d8fcc253858e6baba65ac68ec5b9363944e Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Add promiscuous on VLAN supportGreg Rose
NFV use cases require the ability to steer packets to VSIs by VLAN tag alone while being in promiscuous mode for multicast and unicast MAC addresses. These two new functions support that ability. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e/i40evf: Only offload VLAN tag if enabledJesse Brandeburg
The driver was offloading the VLAN tag into the skb any time there was a VLAN tag and the hardware stripping was enabled. Just check to make sure it's enabled before put_tag. Change-Id: Ife95290c06edd9a616393b38679923938b382241 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Remove zero checkGreg Rose
A mirror rule ID may be zero so do not return invalid parameter when the user passes in a zero value for a rule ID. Change-ID: I261b8c24725ce2c6ed32f859da81093dfcbe2970 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Add DeviceID for X722 QSFP+Kamil Krawczyk
Change-ID: I1370fbc7774e815ac1ad56561e97488e829592fc Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Add device capability which defines if update is availableMichal Kosiarz
Add device capability which defines if update is available and security check is needed during update process. Change-ID: I380787c878275e1df18b39198df3ee3666342282 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40evf: Allow PF driver to configure RSSMitch Williams
If the PF driver reports proper support, allow the PF driver to configure RSS on the behalf of the VF driver. This will allow for RSS support on future hardware without changes to the VF driver. Unfortunately, the old RSS code still needs to stay as the driver needs to be compatible with PF drivers that don't support this interface. But this change still simplifies the data structures a bunch and makes this code simpler to read and maintain. Change-ID: I0375aad40788ecdc0cb24d5cfeccf07804e69771 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e: Specify AQ event opcode to wait forShannon Nelson
To add a little flexibility to the nvmupdate facility, this code adds the ability to specify an AQ event opcode to wait on after the Exec_AQ request. Change-ID: Iddbfd63c3de8df3edb9d3e90678b08989bc4946e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e: Code cleanup in i40e_add_fdir_ethtoolShannon Nelson
A little bit of code cleanup in prep for more cloud filter work. Change-ID: I0dc33ce0d4c207944336a07437640fef920c100c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40evf: Don't PanicMitch Williams
Under some circumstances the driver remove function may be called before the driver is fully initialized. So we can't assume that we know where our towel is at, or that all of the data structures are initialized. To ensure that we don't panic, check that the vsi_res pointer is valid before dereferencing it. Then drink beer and eat peanuts. Change-ID: If697b4db57348e39f9538793e16aa755e3e1af03 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e: Add support for configuring VF RSSMitch Williams
Add support for configuring RSS on behalf of the VFs. This removes the burden of dealing with different hardware interfaces from the VF drivers, allowing for better future compatibility. Change-ID: Icea75d3f37241ee8e447be5779e5abb53ddf04c0 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e/i40evf: Add support for IPIP and SIT offloadsAlexander Duyck
Looking over the documentation it turns out enabling IPIP and SIT offloads for i40e is pretty straightforward. As such I decided to enable them with this patch. In my testing I am seeing an improvement of 8 to 10 Gb/s for IPIP and SIT tunnels with this offload enabled. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40e/i40evf: Clean up feature flagsAlexander Duyck
The feature flags list for i40e and i40evf is beginning to become pretty massive. I plan to add another 4 or so features to these drivers and duplicating the flags for each and every flags list is becoming a bit repetitive. The primary change here is that we now build our features list around hw_encap_features. After that we assign that to vlan_features, hw_features, and finally map that onto features. In addition we end up throwing features onto hw_encap_features that end up having no effect such as the Rx offloads and SCTP_CRC. However that should have no impact and makes things a bit easier for us as hw_encap_features is one of the less updated features maps available. For i40evf I went through and sanity checked a few features as well. Specifically RXCSUM was being set as a read-only feature which didn't make much sense. I have updated things so we can clear the NETIF_F_RXCSUM flag since that is really a software feature and not a hardware one anyway so disabling it is just a matter of ignoring the result from the hardware. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: use msleep for long delaysArnd Bergmann
The newly added x550em_a support causes a link failure on ARM because of an overly long time passed into udelay(): ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! There are multiple variants of the ixgbe_acquire_swfw_sync_*() function, and the other ones all use msleep(), so we can safely assume that all callers are allowed to sleep, which makes msleep() a better replacement than mdelay(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 49425dfc7451 ("ixgbe: Add support for x550em_a 10G MAC type") Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: Move API negotiation function into mac_opsAlexander Duyck
This patch moves API negotiation into mac_ops. The general idea here is that with HyperV on the way we need to make certain that anything that will have different versions between HyperV and a standard VF needs to be abstracted enough so that we can have a separate function between the two so we can avoid changes in one breaking something in the other. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe/ixgbevf: Add support for GSO partialAlexander Duyck
This patch adds support for partial GSO segmentation in the case of tunnels. Specifically with this change the driver an perform segmentation as long as the frame either has IPv6 inner headers, or we are allowed to mangle the IP IDs on the inner header. This is needed because we will not be modifying any fields from the start of the start of the outer transport header to the start of the inner transport header as we are treating them like they are just a block of IP options. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: make use of BIT() macro to avoid shift of signed valuesJacob Keller
Also cleanup a case where we're bit shifting a value into place, and use an unsigned constant. Make use of the unsigned postfix in places where BIT() macro is not appropriate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: resolve shift of negative value warningJacob Keller
Make use of GENMASK instead of open coding the equivalent operation incorrectly. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: use BIT() macroJacob Keller
Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts. Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: Add work around for empty SFP+ cage crosstalkDon Skidmore
It is possible on some systems that crosstalk could lead to link flap on empty SFP+ cages. A new NVM bit was defined to let SW know it needs to implement the work around which consists of verifying that there is a module in the cage before acting on the LSC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: Use correct FC setup function for x550em_aMark Rustad
Somehow the wrong fc_setup function was used for x550em_a, so correct that. Also set setup_link to NULL as its value is determined later, just like it is with X550EM_x. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: add support for per-queue ethtool statsEmil Tantilov
Implement per-queue statistics for packets, bytes and busy poll specific counters. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-15 09:01:55 +0000