summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2016-07-05cxgb4: update latest firmware version supportedGanesh Goudar
Change t4fw_version.h to update latest firmware version number Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5: Avoid setting unused var when modifying vport node GUIDOr Gerlitz
GCC complains on unused-but-set-variable, clean this up. Fixes: 23898c763f4a ('net/mlx5: E-Switch, Modify node guid on vf set MAC') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04Revert "fsl/fman: fix error handling"David S. Miller
This reverts commit a788a4a040e003574b8ad17115706ab1601ec572. This patch is wrong, the type returned doesn't fit what the error pointer macros expect. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04fsl/fman: fix error handlingChristophe Jaillet
This is likely that checking 'fman->fifo_offset' instead of 'fman->cam_offset' is expected here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02enc28j60: Fix race condition in enc28j60 driverSergio Valverde
The interrupt worker code for the enc28j60 relies only on the TXIF flag to determinate if the packet transmission was completed. However the datasheet specifies in section 12.1.3 that TXERIF will clear the TXRTS after a transmit abort. Also in section 12.1.4 that TXIF will be set when TXRTS transitions from '1' to '0'. Therefore the TXIF flag is enabled during transmission errors. This causes a race condition, since the worker code will invoke enc28j60_tx_clear() -> netif_wake_queue(), potentially invoking the ndo_start_xmit function to send a new packet. The enc28j60_send_packet function uses a workqueue that invokes enc28j60_hw_tx(). In between this function is called, the worker from the interrupt handler will enter the path for error handler because of the TXERIF flag, causing to invoke enc28j60_tx_clear() again and releasing the packet scheduled for transmission, causing a kernel crash with due a NULL pointer. These crashes due a NULL pointer were observed under stress conditions of the device. A BUG_ON() sequence was used to validate the issue was fixed, and has been running without problems for 2 years now. Signed-off-by: Diego Dompe <dompe@hpe.com> Acked-by: Sergio Valverde <sergio.valverde@hpe.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02net: stmmac: Fix null-function call in ISR on stmmac1000Matt Corallo
(resent due to overhelpful mail client corrupting patch) At least on Meson GXBB, the CORE_IRQ_MTL_RX_OVERFLOW interrupt is thrown with the stmmac1000 driver, which does not support set_rx_tail_ptr. With this patch and the clock fixes, 1G ethernet works on ODROID-C2. Signed-off-by: Matt Corallo <git@bluematt.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net: bcmsysport: Device stats are unsigned longFlorian Fainelli
On 64bits kernels, device stats are 64bits wide, not 32bits. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Log link state changesShaker Daibes
Add Link UP/Down prints to kernel log when link state changes Signed-off-by: Shaker Daibes <shakerd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Validate BW weight values of ETSRana Shahout
Valid weight assigned to ETS TClass values are 1-100 Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Fix select queue callbackRana Shahout
The default fallback function used by mlx5e select queue can return any TX queues in range [0..dev->num_real_tx_queues). The current implementation assumes that the fallback function returns a number in the range [0.. number of channels). Actually dev->num_real_tx_queues = (number of channels) * dev->num_tc; which is more than the expected range if num_tc is configured and could lead to crashes. To fix this we test if num_tc is not configured we can safely return the fallback suggestion, if not we will reciprocal_scale the fallback result and normalize it to the desired range. Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Copy all L2 headers into inline segmentMatthew Finlay
ConnectX4-Lx uses an inline wqe mode that currently defaults to requiring the entire L2 header be included in the wqe. This patch fixes mlx5e_get_inline_hdr_size() to account for all L2 headers (VLAN, QinQ, etc) using skb_network_offset(skb). Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Handle RQ flush in error casesDaniel Jurgens
Add a timeout to avoid an infinite loop waiting for RQ's to flush. This occurs during AER/EEH and will also happen if the device stops posting completions due to internal error or reset, or if moving the RQ to the error state fails. Also cleanup posted receive resources when closing the RQ. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Implement ndo_tx_timeout callbackDaniel Jurgens
Add callback to handle TX timeouts. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Timeout if SQ doesn't flush during closeDaniel Jurgens
Avoid an infinite loop by timing out waiting for the SQ to flush. Also clean up the TX descriptors if that happens. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Add timeout handle to commands with callbackMohamad Haj Yahia
The current implementation does not handle timeout in case of command with callback request, and this can lead to deadlock if the command doesn't get fw response. Add delayed callback timeout work before posting the command to fw. In case of real fw command completion we will cancel the delayed work. In case of fw command timeout the callback timeout handler will be called and it will simulate fw completion with timeout error. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix potential deadlock in command mode changeMohamad Haj Yahia
Call command completion handler in case of timeout when working in interrupts mode. Avoid flushing the commands workqueue after acquiring the semaphores to prevent a potential deadlock. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix wait_vital for VFs and remove fixed sleepDaniel Jurgens
The device ID for VFs is in a different location than PFs. This results in the poll always timing out for VFs. There's no good way to read the VF device ID without using the PF's configuration space. Switch to waiting for the health poll to start incrementing. Also remove the 1s sleep at the beginning. fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix incorrect page count when in internal errorDaniel Jurgens
Change page cleanup flow when in internal error to properly decrement the page counts when reclaiming pages. The prevents timing out waiting for extra pages that were actually cleaned up previously. fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Avoid calling sleeping function by the health poll threadMohamad Haj Yahia
In internal error state the health poll thread will eventually call synchronize_irq() (to safely trigger command completions) which might sleep, so we are calling sleeping function from atomic context which is invalid. Here we move trigger_cmd_completions(dev) to enter error state which is the earliest stage in error state handling. This way we won't need to wait for next health poll to trigger command completions and will solve the scheduling while atomic issue. mlx5_enter_error_state can be called from two contexts, protect it with dev->intf_state_lock Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix teardown errors that happen in pci error handlerMohamad Haj Yahia
In case of internal error state we will simulate the commands status through the return value translation function, but we need to simulate all the teardown fw commands as successful so we will not have fw command failure prints. This also fix memory leaks that happen because we skip teardown stages due to failed fw commands. Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net: mvneta: fix open() error cleanupRussell King - ARM Linux
If mvneta_mdio_probe() fails, a kernel warning is triggered due to missing cleanup in the error path. Add the necessary cleanup. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 281 at kernel/irq/manage.c:1814 __free_percpu_irq+0xfc/0x130 percpu IRQ 38 still enabled on CPU0! Modules linked in: bnep bluetooth xhci_plat_hcd xhci_hcd marvell_cesa armada_thermal des_generic ehci_orion mcp3021 spi_orion sfp mdio_i2c evbug fuse CPU: 1 PID: 281 Comm: connmand Not tainted 4.7.0-rc2+ #53 Hardware name: Marvell Armada 380/385 (Device Tree) Backtrace: [<c0013488>] (dump_backtrace) from [<c00137d0>] (show_stack+0x18/0x1c) r6:60010093 r5:ffffffff r4:00000000 r3:dc8ba500 [<c00137b8>] (show_stack) from [<c02c6fe0>] (dump_stack+0xa4/0xdc) [<c02c6f3c>] (dump_stack) from [<c002d4ec>] (__warn+0xd8/0x104) r6:c081e6a0 r5:00000000 r4:edfe5d50 r3:dc8ba500 [<c002d414>] (__warn) from [<c002d5d0>] (warn_slowpath_fmt+0x40/0x48) r10:a0010013 r8:c09356f8 r7:00000026 r6:ef11a260 r5:edd7b980 r4:ef11a200 [<c002d594>] (warn_slowpath_fmt) from [<c008c8e0>] (__free_percpu_irq+0xfc/0x130) r3:00000026 r2:c081e7ac [<c008c7e4>] (__free_percpu_irq) from [<c008c95c>] (free_percpu_irq+0x48/0x74) r10:00008914 r8:00000000 r7:ffffffed r6:c09356f8 r5:00000026 r4:ef11a200 [<c008c914>] (free_percpu_irq) from [<c043dd70>] (mvneta_open+0x118/0x134) r6:ffffffed r5:ef01e640 r4:ef01e000 r3:ef01e000 [<c043dc58>] (mvneta_open) from [<c055f5b4>] (__dev_open+0xa4/0x108) r7:ef01e030 r6:c06ff3d8 r5:ffff9003 r4:ef01e000 [<c055f510>] (__dev_open) from [<c055f844>] (__dev_change_flags+0x94/0x150) r7:00001002 r6:00000001 r5:ffff9003 r4:ef01e000 [<c055f7b0>] (__dev_change_flags) from [<c055f938>] (dev_change_flags+0x20/0x50) r8:00000000 r7:c09334c8 r6:00001002 r5:00000148 r4:ef01e000 r3:00008914 [<c055f918>] (dev_change_flags) from [<c05de044>] (devinet_ioctl+0x6f4/0x7e0) r8:00000000 r7:c09334c8 r6:00000000 r5:ee87200c r4:00000000 r3:00008914 [<c05dd950>] (devinet_ioctl) from [<c05e0168>] (inet_ioctl+0x1b8/0x1c8) r10:beb4499c r9:edfe4000 r8:ecf13280 r7:c096cf00 r6:beb4499c r5:eef7c240 r4:00008914 [<c05dffb0>] (inet_ioctl) from [<c053c898>] (sock_ioctl+0x78/0x300) [<c053c820>] (sock_ioctl) from [<c0155ecc>] (do_vfs_ioctl+0x98/0xa60) r7:00000011 r6:00008914 r5:00000011 r4:c01568d0 [<c0155e34>] (do_vfs_ioctl) from [<c01568d0>] (SyS_ioctl+0x3c/0x60) r10:00000000 r9:edfe4000 r8:beb4499c r7:00000011 r6:00008914 r5:ecf13280 r4:ecf13280 [<c0156894>] (SyS_ioctl) from [<c000fe60>] (ret_fast_syscall+0x0/0x1c) r8:c0010004 r7:00000036 r6:00000011 r5:000a2978 r4:00000000 r3:00009003 ---[ end trace 711f625d5b04b3a7 ]--- Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qlcnic: add wmb() call in transmit data path.Sony Chacko
Call wmb() to ensure writes are complete before hardware fetches updated Tx descriptors. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29ixgbevf: ixgbevf_write/read_posted_mbx should use IXGBE_ERR_MBX to ↵Xin Long
initialize ret_val Now ixgbevf_write/read_posted_mbx use -IXGBE_ERR_MBX as the initiative return value, but it's incorrect, cause in ixgbevf_vlan_rx_add_vid(), it use err == IXGBE_ERR_MBX, the err returned from mac.ops.set_vfta, and in ixgbevf_set_vfta_vf, it return from write/read_posted. so we should initialize err with IXGBE_ERR_MBX, instead of -IXGBE_ERR_MBX. With this fix, the other functions that called it also can work well, cause they only care about if err is 0 or not. Signed-off-by: Xin Long <lucien.xin@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-29e1000e: keep Rx/Tx HW_VLAN_CTAG in syncJarod Wilson
The bit in the e1000 driver that mentions explicitly that the hardware has no support for separate RX/TX VLAN accel toggling rings true for e1000e as well, and thus both NETIF_F_HW_VLAN_CTAG_RX and NETIF_F_HW_VLAN_CTAG_TX need to be kept in sync. Revert a portion of commit 889ad456660461 ("e1000e: keep VLAN interfaces functional after rxvlan off") since keeping the bits in sync resolves the original issue. Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-29qed: Protect the doorbell BAR with the write barriers.Sudarsana Reddy Kalluru
SPQ doorbell is currently protected with the compilation barrier. Under the stress scenarios, we may get into a state where (due to the weak ordering) several ramrod doorbells were written to the BAR with an out-of-order producer values. Need to change the barrier type to a write barrier to make sure that the write buffer is flushed after each doorbell. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29e1000e: keep VLAN interfaces functional after rxvlan offJarod Wilson
I've got a bug report about an e1000e interface, where a VLAN interface is set up on top of it: $ ip link add link ens1f0 name ens1f0.99 type vlan id 99 $ ip link set ens1f0 up $ ip link set ens1f0.99 up $ ip addr add 192.168.99.92 dev ens1f0.99 At this point, I can ping another host on vlan 99, ip 192.168.99.91. However, if I do the following: $ ethtool -K ens1f0 rxvlan off Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on again. I'm not sure if this is actually intended behavior, or if there's a lack of software VLAN stripping fallback, or what, but things continue to work if I simply don't call e1000e_vlan_strip_disable() if there are active VLANs (plagiarizing a function from the e1000 driver here) on the interface. Also slipped a related-ish fix to the kerneldoc text for e1000e_vlan_strip_disable here... Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag()Dan Carpenter
There is a static checker warning here "warn: mask and shift to zero" and the code sets "ring" to zero every time. From looking at how QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the qlcnic_83xx_hndl() should be removed. Fixes: 4be41e92f7c6 ('qlcnic: 83xx data path routines') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29ibmvnic: fix to use list_for_each_safe() when delete itemsWei Yongjun
Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each() macro aptly named list_for_each_safe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: thunderx: Fix TL4 configuration for secondary QsetsSunil Goutham
TL4 calculation for a given SQ of secondary Qsets is incorrect and goes out of bounds and also for some SQ's TL4 chosen will transmit data via a different BGX interface and not same as primary Qset's interface. This patch fixes this issue. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: thunderx: Fix link status reportingSunil Goutham
Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Tao Wang <tao.wang@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Reorganize ethtool statisticsGal Pressman
Categorize and reorganize ethtool statistics counters by renaming to "rx_*" and "tx_*" and removing redundant and duplicated counters, this way they are easier to grasp and more user friendly. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Fix number of PFC counters reported to ethtoolGal Pressman
Number of PFC counters used to count only number of priorities with PFC enabled, but each priority has more than one counter, hence the need to multiply it by the number of PFC counters per priority. Fixes: cf678570d5a1 ('net/mlx5e: Add per priority group to PPort counters') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Prevent adding the same vxlan portMatthew Finlay
Do not allow the same vxlan udp port to be added to the device more than once. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Check for BlueFlame capability before allocating SQ uarGal Pressman
Previous to this patch mapping was always set to write combining without checking whether BlueFlame is supported in the device. Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Change enum to better reflect usageEli Cohen
Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an operation. Fixes: acff797cd1874 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devicesMajd Dibbiny
Add the upcoming ConnectX-5 PCIe 4.0 device to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5: Update command stringsEli Cohen
Add command string for MODIFY_FLOW_TABLE which is used by the driver. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net/mlx5: use mlx5_buf_alloc_node instead of mlx5_buf_alloc in mlx5_wq_ll_createWang Sheng-Hui
Commit 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") introduced mlx5_*_alloc_node() but missed changing some calling and warn messages. This patch introduces 2 changes: * Use mlx5_buf_alloc_node() instead of mlx5_buf_alloc() in mlx5_wq_ll_create() * Update the failure warn messages with _node postfix for mlx5_*_alloc function names Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Acked-By: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Remove superflous netif_carrier_on()Florian Fainelli
bgmac_open() calls phy_start() to initialize the PHY state machine, which will set the interface's carrier state accordingly, no need to force that as this could be conflicting with the PHY state determined by PHYLIB. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Start transmit queue in bgmac_openFlorian Fainelli
The driver does not start the transmit queue in bgmac_open(). If the queue was stopped prior to closing then re-opening the interface, we would never be able to wake-up again. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Fix SOF bit checkingFlorian Fainelli
We are checking for the Start of Frame bit in the ctl1 word, while this bit is set in the ctl0 word instead. Read the ctl0 word and update the check to verify that. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27net: smsc911x: Fix bug where PHY interrupts are overwritten by 0Jeremy Linton
By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net/mlx4_en: Avoid unregister_netdev at shutdown flowEran Ben Elisha
This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net/mlx4_en: Fix the return value of a failure in VLAN VID add/killKamal Heib
Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137e6b6 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19qed: Add missing port-modeYuval Mintz
The 'MODULE_FIBER' value replaced several other FIBER values in newer management firmware images, so existing code would fail to properly reflect its mode. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19qed: Fix returning unlimited SPQ entriesYuval Mintz
Driver has 2 sets of entries for handling ramrod configurations toward firmware - a regular pre-allocated set of entires and a possible 'unlimited' list of additional pending entries. In most scenarios the 'unlimited' list would not be used, but when it does the handling of the ramrod completion doesn't properly handle the release of the entry. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19qed*: Don't reset statistics on inner reloadYuval Mintz
Several user APIs can cause driver to perform an inner-reload. Currently, doing this would cause the HW/FW statistics of the adapter to reset, which isn't the expected behavior [statistics should only reset on explicit unloads]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19qed: Prevent VF from Tx-switching 'promisc'Yuval Mintz
Internal loopback in driver is based on two things - first is the willingness of transmitter to use it [in case of VFs, this can be forced based on VEPA/VEB] and secondly on another vport classification configuration which should match the packet's destination. Current code allows non-linux VFs to configure a 'promisc' mode on Tx, meaning all traffic sent by VF would be loopbacked internally by firmware; This isn't considered a valid mode and as such should be prevented by PF. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19qed: Correct default vlan behaviorYuval Mintz
When no vlan filter is configured, firmware has a configurable default on whether to pass only untagged packets or all packets regardless of their tagging. Driver currently doesn't set this field in the necessary ramrod, causing the default to always be 'receive all'. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: tilegx: use correct timespec64 typeArnd Bergmann
The conversion to the 64-bit time based ptp methods left two instances of 'struct timespec' in place. This is harmless because 64-bit architectures define timespec64 as timespec, and this driver is not used on 32-bit machines. However, using 'struct timespec64' directly is obviously the right thing to do, and will help us remove 'struct timespec' in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b9acf24f779c ("ptp: tilegx: convert to the 64 bit get/set time methods.") Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-15 03:53:30 +0000