summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2011-10-14ath9k: Rename AR9480 into AR9462Rajkumar Manoharan
Renamed to be in sync with Marketing term and to avoid confusion with other chip names. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Rename AR9480 -> AR9462 initvalsRajkumar Manoharan
The AR946/8x chips are 2x2 Dual band with BT support. In order to avoid misleading with other chips and to be in sync with marketing team's term, AR9480 is renamed as AR9462. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Do fast channel change based on reusable calibration resultsRajkumar Manoharan
Support the fast channel change across band switch only when there are available of reusable cabliration results. And also observed that doing agc control calibration on fastcc, sometimes causing calibration timeout. Hence changing agc control to be run only on full chip reset. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add radio retention support for AR9480Rajkumar Manoharan
Supported calibrations of radio retention table (RTT) are - DC offset - Filter - Peak detect Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Update normal/min noise floor value for AR9480Rajkumar Manoharan
To improve sensitivity for AR9480, the normal and minimum noise floor values of both bands are updated. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Support fast channel change on 5GHz for AR9003 chipsRajkumar Manoharan
The commit "ath9k_hw: Improve fast channel change for AR9003 chips" fixes the fast channel change issue for AR9003 chips that was originally observed in AR9382 chip. Hence enabling fastcc support again for 11A channel for AR9003 chips. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Cleanup Tx calibrations for AR9003 chipsRajkumar Manoharan
Currently Tx IQ calibration is enabled by default for all AR9003 chips. But for AR9480, the calibration status should be read from chip after processing ini. And also the carrier leak calibration status is checked during init cal. As the init_cal is being called for fast channel change too, the tx_cl status only be read after full reset. Hence moving that into process ini function. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add support to reuse Carrier leak calibrationRajkumar Manoharan
This patch adds support to reuse Carrier leak calibration during fast channel change for AR9480 chips. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add support to reuse TxIQ cal measurementsRajkumar Manoharan
Pass an argument to decide whether to reuse the Tx IQ calibration measurements or not during fast channel change. This will be later used by MCI support for AR9480. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Improve fast channel change for AR9003 chipsRajkumar Manoharan
In order to reduce the overall scan time, fast channel change should be implemented properly. This patch adds fast channel change support across band switch or channel mode switch instead of doing full chip reset. During the fastcc, tx iqcal measurements are preserved and will be reloaded after successful the channel change. This patch also addressed fast channel issue where the STA can not see APs in higher than operating channel on 5GHz band after the association. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Updated AR9003 tx gain table for 5GHzRajkumar Manoharan
The 5G Tx gain table w/ XPA is updated to improve spur performance in high_power Tx gain table. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Update AR9003 initval to improve phase noiseRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Updated ar9003 initval table for AR9380Rajkumar Manoharan
The ar9003 table is updated to increase XLNA BIAS output driver strengh. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Fix ASPM L1 issue for AR9480Rajkumar Manoharan
Because of not clearing Bit 14 of AR_WA, the ASPM L1 is not enabled when entering into sleep mode. AR9480 does not need bit 14 to be set. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: only send FCS-fail packets to mac80211 if requestedFelix Fietkau
Prevents lots of broken frames from showing up on monitor interfaces by default. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: fix a regression in key miss handlingFelix Fietkau
The commit "ath9k_hw: Fix incorrect key_miss handling" changed the code to only report key miss errors if a MIC error wasn't reported. When checking the flags in that order in the MAC code, it might miss some real events, because the value of the MIC error flag is undefined under some conditions. The primary issue addressed by the previous commit is making sure that MIC errors are properly reported on the STA side. This can be fixed in a better way by adding a separate rx status flag for key miss and ignoring it for multicast frames. This fix slightly improves stability in AP mode on some older hardware, like AR9132. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: remove EEP_REG_1Felix Fietkau
It was previously used for current_rd_ext Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath: remove ath_regulatory::current_rd_extFelix Fietkau
It is unused since the previous dead code that was using it had been removed earlier. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: clean up tx power handlingFelix Fietkau
The code for handling various restrictions concerning regulatory limits, antenna gain, etc. is very convoluted and duplicated across various EEPROM parsing implementations, making it hard to review. This patch partially cleans up the mess by unifying regulatory limit handling in one function and simplifying handling of antenna gain. It also removes unused transmit power scaling arrays from the EEPROM code, which belonged to an unimplemented API that isn't supposed to be in the driver anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: make ath9k_hw_set_interrupts use ah->imask by defaultFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: disable unnecessary PHY error reportingFelix Fietkau
PHY errors relevant for ANI are always tracked by hardware counters, the bits that allow them to pass through the rx filter are independent of that. Enabling PHY errors in the rx filter often creates lots of useless DMA traffic and might be responsible for some of the rx dma stop failure warnings. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: fix retry counting / BAR handling during queue flushFelix Fietkau
When tx is suspended temporarily and the queue is flushed, do not increase the retry count or attempt to send out BAR frames. Instead simply retry the affected subframes normally after the reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: improve PS filter clearing and retry counting for A-MPDUFelix Fietkau
Do not increment the retry counter if packets to a sleeping station were not sent because of tx failure, instead of only checking the filter flag. Clear the PS filter only after an A-MPDU was reported as filtered, otherwise the hardware might do some unnecessary extra retransmissions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: keep track of what's triggering hardware resetsFelix Fietkau
Export how many times each of the reset triggers has fired through debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: indicate which queues are blocked when stopping tx failsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: remove some bogus error handling codeDan Carpenter
If "axq_qnum >= ARRAY_SIZE(sc->tx.txq)", then the call to ath9k_hw_releasetxqueue() would read beyond the end of the ah->txq[] array and possibly corrupt memory. Fortunately, ath9k_hw_setuptxqueue() doesn't return high values of "axq_qnum" and this code can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath5k: remove some unneeded error handling codeDan Carpenter
th5k_hw_setup_tx_queue() returns a valid offset into the ah->ah_txq[] array. The ah->ah_txq[] and the ah->txqs[] array are the same size. Both have AR5K_NUM_TX_QUEUES elements. So this error handling code will never trigger. Also it's wrong. The call to ath5k_hw_release_tx_queue() with a qnum of AR5K_NUM_TX_QUEUES or more will just trigger a WARN_ON() and return. Or if it missed the WARN_ON(), it would just corrupt some memory and return. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath6kl: fixup merge damage in ath6kl_mgmt_txJohn W. Linville
CC [M] drivers/net/wireless/ath/ath6kl/cfg80211.o drivers/net/wireless/ath/ath6kl/cfg80211.c:1838:2: warning: initialization from incompatible pointer type Caused by commit e9f935e3e8dc0bddd0df6d148165d95925422502... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_hw: set pci_express capability true for AR9480Mohammed Shafi Shajakhan
the AR_SREV register does not seems to indicate whether AR9480 is pci_express capable or not though the other information like macVersion etc can be obtained properly. this fix is essential as ASPM won't be intialized and its related driver functionality ath9k_hw_configpcipowersave won't be called Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_hw: Fix number of GPIO pins for AR9287/9300Mohammed Shafi Shajakhan
this patch fixes the assumption of maximum number of GPIO pins present in AR9287/AR9300. this fix is essential as we might encounter some functionality issues involved in accessing the status of GPIO pins which are all incorrectly assumed to be not within the range of max_num_gpio of AR9300/AR9287 chipsets Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03mac80211: pass vif param to conf_tx() callbackEliad Peller
tx params should be configured per interface. add ieee80211_vif param to the conf_tx callback, and change all the drivers that use this callback. The following spatch was used: @rule1@ struct ieee80211_ops ops; identifier conf_tx_op; @@ ops.conf_tx = conf_tx_op; @rule2@ identifier rule1.conf_tx_op; identifier hw, queue, params; @@ conf_tx_op ( - struct ieee80211_hw *hw, + struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) {...} Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_hw: extend GPIO pin select mask for rfkillMohammed Shafi Shajakhan
this extends the bits for rf kill GPIO selection to [7:2] from [4:2] as we use GPIO pin 11 as rfkill for AR9480 and also remove few unused macros Cc: Wilson Tsao <wtsao@qca.qualcomm.com> Cc: "Hu, Russell" <rhu@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03ath9k_htc: add AVM FRITZ!WLAN 11N v2 supportLuis R. Rodriguez
This was reported and tested by Martin Walter over at AVM GmbH Berlin. This also applies to 3.0.1 so sendint to stable. Cc: s.kirste@avm.de Cc: d.friedel@avm.de Cc: Martin Walter <m.walter@avm.de> Cc: Peter Grabienski <pgrabien@qca.qualcomm.com> Cc: stable@kernel.org Tested-by: Martin Walter <m.walter@avm.de> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2011-10-03ath6kl: include vmalloc.h in debug.cKalle Valo
Fixes compilation errors when compiling for ARM: ath6kl/debug.c:312: error: implicit declaration of function 'vmalloc' ath6kl/debug.c:312: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:342: error: implicit declaration of function 'vfree' ath6kl/debug.c:696: warning: assignment makes pointer from integer without a cast ath6kl/debug.c:871: warning: assignment makes pointer from integer without a cast Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-10-01ath6kl: fix size_t related warningsKalle Valo
My earlier debug log additions added these warnings when compiling 64 bit kernels: ath6kl/init.c:962: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:975: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:988: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1009: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' ath6kl/init.c:1192: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1236: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' ath6kl/init.c:1267: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Reported-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-30mac80211: let drivers inform it about per TID buffered framesJohannes Berg
For uAPSD implementation, it is necessary to know on which ACs frames are buffered. mac80211 obviously knows about the frames it has buffered itself, but with aggregation many drivers buffer frames. Thus, mac80211 needs to be informed about this. For now, since we don't have APSD in any form, this will unconditionally set the TIM bit for the station but later with uAPSD only some ACs might cause the TIM bit to be set. ath9k is the only driver using this API and I only modify it in the most basic way, it won't be able to implement uAPSD with this yet. But it can't do that anyway since there's no way to selectively release frames to the peer yet. Since drivers will buffer frames per TID, let them inform mac80211 on a per TID basis, mac80211 will then sort out the AC mapping itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k/ath9k_htc: Fix PS wrappers for RF killMohammed Shafi Shajakhan
ath9k_hw_gpio_get reads the GPIO in/out registers to get the status of GPIO pins, so use PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove redundant my beacon check at ath_rx_ps_beaconRajkumar Manoharan
Make use of the rx status's is_mybeacon in order to avoid redundant memcmp. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30ath9k: Remove unnecessary AMPDU check at tx statusRajkumar Manoharan
Fill the ampdu_[ack]_len for both aggregation and normal frames. So that we could avoid unnecesary conditional at tx status. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-28wireless/ath6kl: use of module_param requires the inclusion of moduleparam.hStephen Rothwell
Otheriwse the module.h split up fails like this: drivers/net/wireless/ath/ath6kl/init.c:27:26: error: expected ')' before 'uint' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: improve wmi debug messagesKalle Valo
Add a new debug level ATH6KL_DBG_WMI_DUMP and other minor improvements to the wmi debug messages. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: add debug logs for bootingKalle Valo
Just to make it easier to find out why boot fails. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: add sdio debug messagesKalle Valo
Add extensive debug messages to sdio.c. Makes it easier to debug various problems. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: add prefix parameter to ath6kl_dbg_dump()Kalle Valo
Makes it easier to recognise longs dumps. Obligatory screenshot using "rx" prefix: ath6kl: ath6kl_rx rx 00000000: 10 10 00 00 00 00 08 30 00 00 00 00 00 00 f9 0b .......0........ rx 00000010: 2c 44 08 30 00 00 f9 0b 0c a4 02 00 00 00 73 d2 ,D.0..........s. rx 00000020: 94 00 f9 0b 04 8c 01 00 02 00 07 02 02 00 f9 0b ................ Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28ath6kl: silence "invalid rate" warningKalle Valo
For some reason firmware is sending invalid rates when we try to query current bitrate from ath6kl_get_station() and a warning is issued: [ 3810.415720] ath6kl: invalid rate: 1935633515 [ 3811.105493] ath6kl: invalid rate: 1935633515 [ 3811.556063] ath6kl: invalid rate: 1935633515 As the warning happens way too often, convert the warning to a debug message once we have a proper fix. But to make it easy to follow how often the problem appears, add a debugfs to print various statistics about workarounds and make this issue the first WAR. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-09-28Merge branch 'master' of git://git.infradead.org/users/linville/wirelessJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-scan.c net/wireless/nl80211.c
2011-09-27ath9k: fix a regression in ath9k_ps_restoreFelix Fietkau
After 'ath9k: optimize ath9k_ps_restore', it would only send the device to network sleep and not to full sleep anymore, potentially causing more battery drain. Reported-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mac80211: add ieee80211_vif param to tsf functionsEliad Peller
TSF can be kept per vif. Add ieee80211_vif param to set/get/reset_tsf, and move the debugfs entries to the per-vif directory. Update all the drivers that implement these callbacks. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27ath9k: add Block ACK bitmap in sample debugMohammed Shafi Shajakhan
this represents the bitmap of block ACK received after the successful transmission of an aggregate frame. also made few changes to beautify the display Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-16 16:00:34 +0000