summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2016-05-10iwlwifi: trans: don't call the trans-specific ref/unref directlyLuca Coelho
It's cleaner to always call the iwl_trans_ref/unref() functions instead of sometimes calling the trans-specific ops directly. This also prepares for moving some of the code from the trans-specific ops to the common trans code. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: support queue removal in ADD_STA hcmdLiad Kaufman
To indicate to the FW that a queue has been removed, an existing flag in the ADD_STA HCMD (that hasn't been in use) has been changed to indicate that a queue is being removed from a STA. Update this in the driver code. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: utilize the frame release infrastructureSara Sharon
The firmware will send frame release notification in order to release "stuck" frames on a queue where no more frames arrive on. Upon receiving the message the driver shall indicate the frames up to the NSSN. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: add reorder timeout per frameSara Sharon
Add a timer in order to release expired frames from the reorder buffer. This is needed since some APs do not retransmit frames to fill in the reorder holes and in TCP it results with a complete stall of traffic. This has a few side effects on the general design: The nssn may not reflect the the head of the reorder buffer. This situation is valid, and packets with SN lower than the reorder buffer head will be dropped. Another side effect is that since the reorder timer might expire we need to lock the reorder buffer. This however is fine since the locking is only inside a single reorder buffer between RX path and reorder timeout and there is no outside contention. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: add reorder buffer per queueSara Sharon
Next hardware will direct packets to core based on the TCP/UDP streams. This logic can create holes in reorder buffer since packets that belong to other stream were directed to a different core. However, those are valid holes and the packets can be indicated in L3 order. The hardware will utilize a mechanism of informing the driver of the normalized ssn and the driver shall release all packets that SN is lower than the nssn. This enables managing the reorder across the queues without sharing any data between them. The reorder buffer is allocated and released directly in the RX path in order to avoid various races between control path and rx path. The code utilizes the internal messaging to notify rx queues of when to delete the reorder buffer. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: add firmware API name commentJohannes Berg
Add the firmware API name to the struct iwl_wowlan_gtk_status. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: add infrastructure for tracking BA session in driverSara Sharon
According to the spec when a BA session is started there is a timeout set for the session in the ADDBA request. If there is not activity on the TA/TID then the session expires and a DELBA is sent. In order to check for the timeout, data must be shared among the rx queues. Add a timer that runs as long as BA session is active for the station and stops aggregation session if needed. This patch also lays the infrastructure for the reordering buffer which will be enabled in the next patches. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: change RX sync notification to be an attribute and not a typeSara Sharon
Currently the sync notification is a type of notification. However, it is better fitted as an attribute of a notification, since there might be another message in the payload (delba for instance) that should be sent while control path is waiting for all queues to process. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: implement driver RX queues sync commandSara Sharon
mac80211 will call the driver whenever there is a race between RSS queues and control path that requires a processing of all pending frames in RSS queues. Implement that by utilizing the internal notification mechanism: queue a message to all queues. When the message is received on a queue it decrements the atomic counter. This guarantees that all pending frames in the RX queue were processed since the message is in order inside the queue. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10mwifiex: change sleep cookie poll countShengzhen Li
Sometimes current polling count is not sufficient. This patch increases it to 100. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-10iwlwifi: Edit the 8265 SDIO IDMordechai Goodstein
Add new 8265 series SDIO ID. Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: support p2p device frames tx on dqa queue #2Liad Kaufman
Support sending P2P device frames should be sent from queue #2, as required in DQA mode. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10iwlwifi: mvm: allocate queue for probe response in dqa modeLiad Kaufman
In DQA mode, allocate a dedicated queue (#9) for P2P GO/soft AP probe responses. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-10Merge tag 'iwlwifi-for-kalle-2016-05-04' of ↵Luca Coelho
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix P2P rates (and possibly other issues) Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-05-09ath9k: Fix symbol overlap window for half/quarter channelsHelmut Schaa
Since commit cd6cfd7311a385144a2f9c74f692ae2df3ae033f "ath9k: do not set half/quarter channel flags in AR_PHY_MODE" the condition "rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF)" would never evaluate to true. Fix this by using the available IS_CHAN_HALF_RATE and IS_CHAN_QUARTER_RATE marcros instead. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Felix Fietkau <nbd@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-09ath9k: Simplify ar9003_hw_tx99_set_txpowerHelmut Schaa
There's no need to keep the same for loop twice in the code. Move the txpower cap before the loop to reduce code complexity. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-09ath9k: Move TX99 config option under ath9k debuggingHelmut Schaa
Since ATH9K_TX99 depends on ATH9K_DEBUGFS anyway move it there such that "make menuconfig" will indent TX99 support below ath9k debugging. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-09ath9k: reuse ar9003_hw_tx_power_regwrite for tx99 setupHelmut Schaa
The same functionality as ar9003_hw_tx_power_regwrite is hardcoded in ar9003_hw_tx99_set_txpower. Just reuse the existing ar9003_hw_tx_power_regwrite for TX99 setup too. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: release pre_cal_file while unloading driverRajkumar Manoharan
Failing to release pre_cal_file caldata on deinit causes memory leak. Fixes: b131129d9657 ("ath10k: fix calibration init sequence of qca99x0") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: update bss channel survey informationRajkumar Manoharan
During hw scan, firmware sends two channel information events (pre- complete, complete) to host for each channel change. The snap shot of cycle counters (rx_clear and total) between these two events are given for survey dump. In order to get latest survey statistics of all channels, a scan request has to be issued. In general, an AP DUT is brought up, it won't leave BSS channel except few cases like overlapping bss or radar detection. So survey statistics of bss channel is always referring to older data that are collected before starting AP (either ACS/OBSS scan). To collect latest survey information from target, firmware provides WMI interface to read cycle counters from hardware. For each survey dump request, BSS channel cycle counters are read and cleared in hardware. This makes sure that behavior is in align with ath9k survey report. So survey dump always gives snap shot of cycle counters b/w two survey requests. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: handle pdev_chan_info wmi eventRajkumar Manoharan
Add handler to process bss channel information wmi event that will be received upon sending pdev_chan_info_request wmi command. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: implement wmi_pdev_bss_chan_info_requestRajkumar Manoharan
Add WMI ops to send pdev_bss_chan_info_request command to target. This command will be used to retrieve updated cycle counters and noise floor value of current operating channel (bss channel). Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: add pdev bss channel info wmi definitionsRajkumar Manoharan
Add WMI definitions for pdev bss channel information request and event. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: fix kernel panic, move arvifs list head init before htt initAnilkumar Kolli
It is observed that while loading and unloading ath10k modules in an infinite loop, before ath10k_core_start() completion HTT rx frames are received, while processing these frames, dereferencing the arvifs list code is getting hit before initilizing the arvifs list, causing a kernel panic. This patch initilizes the arvifs list before initilizing htt. Fixes the below issue: [<bf88b058>] (ath10k_htt_rx_pktlog_completion_handler+0x278/0xd08 [ath10k_core]) [<bf88b058>] (ath10k_htt_rx_pktlog_completion_handler [ath10k_core]) [<bf88c0dc>] (ath10k_htt_txrx_compl_task+0x5f4/0xeb0 [ath10k_core]) [<bf88c0dc>] (ath10k_htt_txrx_compl_task [ath10k_core]) [<c0234100>] (tasklet_action+0x8c/0xec) [<c0234100>] (tasklet_action) [<c02337c0>] (__do_softirq+0xf8/0x228) [<c02337c0>] (__do_softirq) [<c0233920>] (run_ksoftirqd+0x30/0x90) Code: e5954ad8 e2899008 e1540009 0a00000d (e5943008) ---[ end trace 71de5c2e011dbf56 ]--- Kernel panic - not syncing: Fatal exception in interrupt Fixes: 500ff9f9389d ("ath10k: implement chanctx API") Cc: <stable@vger.kernel.org> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: move spectral related structures under ath10k debugfsMohammed Shafi Shajakhan
Spectral related structures are accessed / modified only if ath10k debugfs is enabled, so it makes more sense to move them under ATH10K_DEBUGFS Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: remove VHT capabilities from 2.4GHzJohannes Berg
According to the spec, VHT doesn't exist in 2.4GHz. There are vendor extensions to allow a subset of VHT to work (notably 256-QAM), but since mac80211 doesn't support those advertising VHT capability on 2.4GHz leads to the behaviour of reporting VHT capabilities but not being able to use any of them due to mac80211's code requiring 80 MHz support. Remove the VHT capabilities from 2.4GHz for now. If mac80211 gets extended to use the (likely Broadcom) vendor IEs for it and handles the lack of 80 MHz support, it can be added back. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06Merge tag 'iwlwifi-for-kalle-2016-05-04' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix P2P rates (and possibly other issues)
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04iwlwifi: mvm: don't override the rate with the AMSDU lenEmmanuel Grumbach
The TSO code creates A-MSDUs from a single large send. Each A-MSDU is an skb and skb->len doesn't include the number of bytes which need to be added for the headers being added (subframe header, TCP header, IP header, SNAP, padding). To be able to set the right value in the Tx command, we put the number of bytes added by those headers in driver_data in iwl_mvm_tx_tso and use this value in iwl_mvm_set_tx_cmd. The problem by setting this value in driver_data is that it overrides the ieee80211_tx_info. The bug manifested itself when we send P2P related frames in CCK since the rate in ieee80211_tx_info is zero-ed. This of course is a violation of the P2P specification. To fix this, copy the original ieee80211_tx_info to the stack and pass it to the functions which need it. Assign the number of bytes added by the headers to the driver_data inside the skb itself. Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03brcm80211: correct speed testingOliver Neukum
Allow for SS+ USB Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03rtl8xxxu: Remove the now obsolete mbox_ext_reg info from rtl8xxxu_fileopsJes Sorensen
With two different h2c_cmd() functions, mbox_ext_reg and mbox_ext_width are no longer needed. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: rtl8xxxu_prepare_calibrate() is never used on gen1Jes Sorensen
Rename it to rtl8xxxu_gen2_prepare_calibrate() and remove the calls to it from rtl8xxxu_gen1_phy_iq_calibrate() Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: Split rtl8723a_h2c_cmd() into a gen1 and a gen2 versionJes Sorensen
The H2C API is completely different between gen1 and gen2 parts, so there is little point trying to treat this as a generic function. All calls to *_h2c_cmd() will always come from a gen1 or a gen2 specific function. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: Rename rtl8723a_disabled_to_emu() to rtl8xxxu_disabled_to_emu()Jes Sorensen
This function is generic to most of the chips, so change the name to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: rename rtl8723a_channel_group() to rtl8xxxu_gen1_channel_to_group()Jes Sorensen
This function is generic for most (if not all) gen1 parts, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: Rename rtl8723a_stop_tx_beacon() to rtl8xxxu_stop_tx_beacon()Jes Sorensen
There is nothing 8723au specific about this function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8188[cr] and rtl8192c related code into rtl8xxxu_8192c.cJes Sorensen
This moves the code for rtl8188c, rtl8188r, and rtl8192c into it's own file. This is purely a code moving exercise, there is no change to the code itself. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8723a related code into rtl8xxxu_8723a.cJes Sorensen
This moves the rtl8723a code into it's own file. This is purely a code moving exercise, no code changes. This device specific file is a lot smaller since the gen1 chips (8723a, 8188c, 8188r, 8192c) share a lot more common code than the gen2 chips. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8723b related code into rtl8xxxu_8723b.cJes Sorensen
This moves the rtl8723b code into it's own file. This is purely a code moving exercise, no functional changes. This did expose rtl723a_h2c_cmd() as a function that should be refactored into a gen1 and a gen2 version. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8192e related code into rtl8xxxu_8192e.cJes Sorensen
This moves the rtl8192e code into it's own file. This is purely a code moving exercise, no code changes. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: Rename rtl8xxxu.c to rtl8xxxu_core.cJes Sorensen
This renames the core file to rtl8xxxu_core.c in order to allow us to keep the module nake rtl8xxxu.ko when refactoring the code into multiple files. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtlwifi: rtl818x: Deinline indexed IO functions, save 21568 bytesDenys Vlasenko
rtl818x_ioread8_idx: 151 bytes, 29 calls rtl818x_ioread16_idx: 151 bytes, 11 calls rtl818x_ioread32_idx: 151 bytes, 5 calls rtl818x_iowrite8_idx: 157 bytes, 117 calls rtl818x_iowrite16_idx: 158 bytes, 74 calls rtl818x_iowrite32_idx: 157 bytes, 22 calls Each of these functions has a pair of mutex lock/unlock ops, both of these ops perform atomic updates of memory (on x86, it boils down to "lock cmpxchg %reg,mem" insn), which are 4-8 times more expensive than call+return. text data bss dec hex filename 95894242 20860288 35991552 152746082 91ab862 vmlinux_before 95872674 20860320 35991552 152724546 91a6442 vmlinux Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Larry Finger <Larry.Finger@lwfinger.net> CC: Chaoming Li <chaoming_li@realsil.com.cn> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03Merge tag 'wireless-drivers-next-for-davem-2016-05-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: brcmfmac * add support for nl80211 BSS_SELECT feature mwifiex * add platform specific wakeup interrupt support ath10k * implement set_tsf() for 10.2.4 branch * remove rare MSI range support * remove deprecated firmware API 1 support ath9k * add module parameter to invert LED polarity wcn36xx * fixes to get the driver properly working on Dragonboard 410c ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27mwifiex: increase dwell time for active scanAmitkumar Karwar
It's been observed that sometimes AP's probe response is received after scan duration gets completed for the channel. This happens especially when wildcard scan is performed along with specific SSID scan. We will increase the time from 30 msecs to 40 msecs. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-27mwifiex: disable channel filtering feature in firmwareAmitkumar Karwar
As 2.4Ghz channels are overlapping, sometimes AP responds to probe request even if it's operating on neighbouring channel. Currently firmware drops those scan entries, as current channel doesn't match with APs channel. This patch enables MWIFIEX_DISABLE_CHAN_FILT flag in scan command to disable the feature so that better scan results will be received in 2.4Ghz band. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-27mwifiex: avoid querying wakeup reason when wowlan is disabledAmitkumar Karwar
In cfg80211 resume handler, we query wakeup reason from firmware and report to cfg80211. if wowlan is disabled, connection is already terminated during suspend. We don't need to query wakeup reason in this case. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-27mwifiex: report wowlan wakeup reasons correctlyAmitkumar Karwar
It's been observed that wakeup on GTK rekey failure wasn't reported to cfg80211. This patch corrects the check so that all valid wakeup reasons are reported. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-27mwifiex: fix coding styleAmitkumar Karwar
Redundant space in case statement is removed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-27mwifiex: transmit packet stats incorrect.Marty Faltesek
tx_packets counter is incremented for aggregated packets, when it had already been incremented for the aggregated packet's constituent parts. Removing the extra count. Signed-off-by: Marty Faltesek <mfaltesek@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-15 23:47:11 +0000