summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-05-04net/mlx5e: Add support for UDP tunnel segmentation with outer checksum offloadAlexander Duyck
This patch assumes that the mlx5 hardware will ignore existing IPv4/v6 header fields for length and checksum as well as the length and checksum fields for outer UDP headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04net/mlx4_en: Add support for inner IPv6 checksum offloads and TSOAlexander Duyck
>From what I can tell the ConnectX-3 will support an inner IPv6 checksum and segmentation offload, however it cannot support outer IPv6 headers. This assumption is based on the fact that I could see the checksum being offloaded for inner header on IPv4 tunnels, but not on IPv6 tunnels. For this reason I am adding the feature to the hw_enc_features and adding an extra check to the features_check call that will disable GSO and checksum offload in the case that the encapsulated frame has an outer IP version of that is not 4. The check in mlx4_en_features_check could be removed if at some point in the future a fix is found that allows the hardware to offload segmentation/checksum on tunnels with an outer IPv6 header. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04net/mlx4_en: Add support for UDP tunnel segmentation with outer checksum offloadAlexander Duyck
This patch assumes that the mlx4 hardware will ignore existing IPv4/v6 header fields for length and checksum as well as the length and checksum fields for outer UDP headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04ixgbevf: Remove unused parameterTony Nguyen
ixgbevf_update_xcast_mode() is not using the netdev parameter; removing it since it's unnecessary. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Disable DCB and FCoE for X550EM_x and x550em_aUsha Ketineni
This patch adds IXGBE_FLAG_DCB_CAPABLE flag that is set for all MACs other than X550EM_x and x550em_a. DCB and FCoE is disabled for these MACS. DCB initialization code is moved to a separate function. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Ronald Bynoe <ronald.j.bynoe@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Use mac_ops instead of trying to identify NIC typeAlexander Duyck
This change makes it so that we can just use function pointers instead of having to identify if a given VF is running on a Linux or Windows PF. By doing this we can avoid having to pull too much information out of the lower layers and can instead just make use of the mac_ops pointers since they should differ between the two types of VFs anyway. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Change the relaxed order settings in VF driver for sparcBabu Moger
We noticed performance issues with VF interface on sparc compared to PF. Setting the RX to IXGBE_DCA_RXCTRL_DATA_WRO_EN brings it on far with PF. Also this matches to the default sparc setting in PF driver. Signed-off-by: Babu Moger <babu.moger@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Revise populating few registers and macro definitionsPreethi Banala
Revise populating few registers in ixgbe_get_regs() and macro definitions. Before applying patch: $ du -k objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko 8572 objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko After applying patch: $ du -k objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko 8568 objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Return 64 bit stats valuesPreethi Banala
The code was ignoring higher 32 bits of stats registers. This patch correctly fills out 64 bit value in two 32 bit words. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Remove duplicate and unused device ID definitionsPreethi Banala
Remove duplicate and unused device ID definitions. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: check EEPROM for WOL support for X540 and aboveEmil Tantilov
This change aims to simplify the logic we use to determine WOL support by reading the EEPROM bits for MACs X540 and newer. Also some cleanups in ixgbe_wol_supported() - changed return type to bool and removed redundant return variable by simply using return after the checks. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: add WoL support for some 82599 subdevice IDsEmil Tantilov
We had some 82599 subdevice IDs missing from the list of parts that support WoL. Reported-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Support Windows hosts (Hyper-V)KY Srinivasan
On Hyper-V, the VF/PF communication is a via software mediated path as opposed to the hardware mailbox. Make the necessary adjustments to support Hyper-V. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbevf: Add the device ID's presented while running on Hyper-VKY Srinivasan
Intel SR-IOV cards present different ID when running on Hyper-V. Add the device IDs presented while running on Hyper-V. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Match on multiple headers for cls_u32 offloadsAmritha Nambiar
Adds support to set filters with multiple header fields (L3,L4)to match on. This is achieved in the following order: 1. Create a leaf hash table for the next header. 2. Create a link to the leaf hash table from the base hash table with matches on next header type and current header fields. 3. Add filter in leaf hash table with match on next header fields and action. Verified with the following filters : Match TCP and DIP: handle 1: u32 divisor 1 u32 ht 800: order 1 link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip protocol 6 ff match ip dst 10.0.0.1/32 match tcp src 28 ffff action drop Delete the filter: Match on DIP, SIP, UDP (SPort, DPort): handle 2: u32 divisor 1 u32 ht 800: order 2 link 2: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip dst 15.0.0.2/32 match ip protocol 17 ff \ match ip src 15.0.0.1/32 match udp src 30 ffff match udp dst 32 ffff action drop Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Add support for redirect action to cls_u32 offloadsSridhar Samudrala
This patch enables 'redirect' to a SRIOV VF or a offloaded macvlan device queue via tc 'mirred' action. Verified with the following script that creates SRIOV VFs, offloaded macvlan and adds tc u32 filters with redirect action to the associated netdevs. # add ingress qdisc. tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # create 4 sriov VFs and bring up the first one. echo 4 > /sys/class/net/p4p1/device/sriov_numvfs sleep 1 ip link set p4p1 up ip link set p4p1_0 up # create a offloaded macvlan device and bring it up. ethtool -K p4p1 l2-fwd-offload on ip link add link p4p1 name mvlan_1 type macvlan ip link set mvlan_1 up # add u32 filter with action to redirect to VF netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip src 192.168.1.3/32 \ action mirred egress redirect dev p4p1_0 # add u32 filter with action to redirect to macvlan netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip src 192.168.2.3/32 \ action mirred egress redirect dev mvlan_1 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net: macb: Probe MDIO bus before registering netdevFlorian Fainelli
The current sequence makes us register for a network device prior to registering and probing the MDIO bus which could lead to some unwanted consequences, like a thread of execution calling into ndo_open before register_netdev() returns, while the MDIO bus is not ready yet. Rework the sequence to register for the MDIO bus, and therefore attach to a PHY prior to calling register_netdev(), which implies reworking the error path a bit. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03rtl8152: correct speed testingOliver Neukum
Allow for SS+ USB Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03usbnet: correct speed testingOliver Neukum
Allow for SS+ USB Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03brcm80211: correct speed testingOliver Neukum
Allow for SS+ USB Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03qed: Apply tunnel configurations after PF startManish Chopra
Configure and enable various tunnels on the adapter after PF start. This change was missed as a part of 'commit 464f664501816ef5fbbc00b8de96f4ae5a1c9325 ("qed: Add infrastructure support for tunneling")' Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net: mvneta: Remove superfluous SMP function callAnna-Maria Gleixner
Since commit 3b9d6da67e11 ("cpu/hotplug: Fix rollback during error-out in __cpu_disable()") it is ensured that callbacks of CPU_ONLINE and CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP function calls are no longer required. Replace smp_call_function_single() with a direct call to mvneta_percpu_enable() or mvneta_percpu_disable(). The functions do not require to be called with interrupts disabled, therefore the smp_call_function_single() calling convention is not preserved. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: netdev@vger.kernel.org Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03stmmac: dwmac-socfpga: kill init() and rename setup() to set_phy_mode()Joachim Eastwood
Remove old init callback which now contains only a call to socfpga_dwmac_setup(). Also rename socfpga_dwmac_setup() to indicate what the function really does. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03stmmac: dwmac-socfpga: call phy_resume() only in resume callbackJoachim Eastwood
Calling phy_resume() should only be need during driver resume to workaround a hardware errata. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03stmmac: dwmac-socfpga: keep a copy of stmmac_rst in driver priv dataJoachim Eastwood
The dwmac-socfpga driver needs to control the reset usually managed by the core driver to set the PHY mode. Take a copy of the reset handle from core priv data so it can be used by the driver later. This also allow us to move reset handling into socfpga_dwmac_setup() where the code that needs it is located. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03stmmac: dwmac-socfpga: add PM ops and resume functionJoachim Eastwood
Implement the needed PM callbacks in the driver instead of relying on the init/exit hooks in stmmac_platform. This gives the driver more flexibility in how the code is organized. Eventually the init/exit callbacks will be deprecated in favor of the standard PM callbacks and driver remove function. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03stmmac: let remove/resume/suspend functions take device pointerJoachim Eastwood
Change stmmac_remove/resume/suspend to take a device pointer so they can be used directly by drivers that doesn't need to perform anything device specific. This lets us remove the PCI pm functions and later simplifiy the platform drivers. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03macb: fix mdiobus_scan() error checkSergei Shtylyov
Now mdiobus_scan() returns ERR_PTR(-ENODEV) instead of NULL if the PHY device ID was read as all ones. As this was not an error before, this value should be filtered out now in this driver. Fixes: b74766a0a0fe ("phylib: don't return NULL from get_phy_device()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03pxa168_eth: fix mdiobus_scan() error checkSergei Shtylyov
Since mdiobus_scan() returns either an error code or NULL on error, the driver should check for both, not only for NULL, otherwise a crash is imminent... Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net/mlx5e: Use workqueue for vxlan opsMatthew Finlay
The vxlan add/delete port NDOs are called under rcu lock. The current mlx5e implementation can potentially block in these calls, which is not allowed. Move to using the mlx5e workqueue to handle these NDOs. Fixes: b3f63c3d5e2c ('net/mlx5e: Add netdev support for VXLAN tunneling') Signed-off-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net/mlx5e: Implement a mlx5e workqueueMatthew Finlay
Implement a mlx5e workqueue to handle all mlx5e specific tasks. Move all tasks currently using the system workqueue to the new workqueue. This is in preparation for vxlan using the mlx5e workqueue in order to schedule port add/remove operations. Signed-off-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issueMatthew Finlay
When MLX5_EN=y MLX5_CORE=y and VXLAN=m there is a linker error for vxlan_get_rx_port() due to the fact that VXLAN is a module. Change Kconfig to select VXLAN when MLX5_CORE=y. When MLX5_CORE=m there is no dependency on the value of VXLAN. Fixes: b3f63c3d5e2c ('net/mlx5e: Add netdev support for VXLAN tunneling') Signed-off-by: Matthew Finlay <matt@mellanox.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net/mlx5: Unmap only the relevant IO memory mappingGal Pressman
When freeing UAR the driver tries to unmap uar->map and uar->bf_map which are mutually exclusive thus always unmapping a NULL pointer. Make sure we only call iounmap() once, for the actual mapping. Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net: ethernet: fec_mpc52xx: move to new ethtool api {get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move the fec_mpc52xx driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net: ethernet: fs-enet: move to new ethtool api {get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move the fs-enet driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net: ethernet: ucc: move to new ethtool api {get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move the ucc driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03net: ethernet: gianfar: move to new ethtool api {get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move the gianfar driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03drivers: net: xgene: constify xgene_cle_ops structureJulia Lawall
The xgene_cle_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ravb: Remove rx buffer ALIGNKazuya Mizuguchi
Aligning the reception data size is not required. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03rtl8xxxu: Remove the now obsolete mbox_ext_reg info from rtl8xxxu_fileopsJes Sorensen
With two different h2c_cmd() functions, mbox_ext_reg and mbox_ext_width are no longer needed. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: rtl8xxxu_prepare_calibrate() is never used on gen1Jes Sorensen
Rename it to rtl8xxxu_gen2_prepare_calibrate() and remove the calls to it from rtl8xxxu_gen1_phy_iq_calibrate() Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: Split rtl8723a_h2c_cmd() into a gen1 and a gen2 versionJes Sorensen
The H2C API is completely different between gen1 and gen2 parts, so there is little point trying to treat this as a generic function. All calls to *_h2c_cmd() will always come from a gen1 or a gen2 specific function. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: Rename rtl8723a_disabled_to_emu() to rtl8xxxu_disabled_to_emu()Jes Sorensen
This function is generic to most of the chips, so change the name to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: rename rtl8723a_channel_group() to rtl8xxxu_gen1_channel_to_group()Jes Sorensen
This function is generic for most (if not all) gen1 parts, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: Rename rtl8723a_stop_tx_beacon() to rtl8xxxu_stop_tx_beacon()Jes Sorensen
There is nothing 8723au specific about this function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8188[cr] and rtl8192c related code into rtl8xxxu_8192c.cJes Sorensen
This moves the code for rtl8188c, rtl8188r, and rtl8192c into it's own file. This is purely a code moving exercise, there is no change to the code itself. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8723a related code into rtl8xxxu_8723a.cJes Sorensen
This moves the rtl8723a code into it's own file. This is purely a code moving exercise, no code changes. This device specific file is a lot smaller since the gen1 chips (8723a, 8188c, 8188r, 8192c) share a lot more common code than the gen2 chips. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8723b related code into rtl8xxxu_8723b.cJes Sorensen
This moves the rtl8723b code into it's own file. This is purely a code moving exercise, no functional changes. This did expose rtl723a_h2c_cmd() as a function that should be refactored into a gen1 and a gen2 version. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-03rtl8xxxu: move rtl8192e related code into rtl8xxxu_8192e.cJes Sorensen
This moves the rtl8192e code into it's own file. This is purely a code moving exercise, no code changes. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-21 14:56:47 +0000