summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2006-05-08[PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID ReaderIan Abbott
This patch adds support for ACG Identification Technologies GmbH's HF Dual ISO Reader (an RFID tag reader) to the ftdi_sio driver's device ID table. The product ID was supplied by anotonios (anton at goto10 dot org) on the ftdi-usb-sio-devel list and subsequently verified by myself (Ian Abbott). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: usbcore: don't check the device's power sourceAlan Stern
The choose_configuration() routine contains code the determine the device's power source, so that configurations requiring external power can be ruled out if the device is running on bus power. Unfortunately it turns out that some devices have errors in their config descriptors and other devices don't like the GET_DEVICE_STATUS request. Since that information wasn't used for anything else, this patch (as673) removes the code, leaving only a comment. It fixes bugzilla entry #6448. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: fix OHCI PM regressionDavid Brownell
This fixes a small regression in USB controller power usage for many OHCI controllers, notably including every non-PCI version of OHCI: on those systems, the runtime autosuspend mechanism is no longer enabled. The change moves to saner defaults. All root hubs are expected to handle remote wakeup (and hence autosuspend), although drivers for buggy silicon may override that default. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: pegasus fixes (logstorm, suspend)David Brownell
Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USBATM: fix modinfo outputDuncan Sands
Because of the way stringify works, using an expression like 64 * 1024 for UDSL_MAX_BUF_SIZE results in 64 * 1024 turning up in the modinfo output instead of 65536. So use 65536 directly (this was the only way I found of fixing this). Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USBATM: change the default speedtouch iso altsettingDuncan Sands
The maximum possible bandwidth for a speedtouch modem is about 7Mbaud. You can only get this by using isochronous urbs (enable_isoc=1) and altsetting 3. With the current default altsetting of 2, the modem maxes out at about 4Mbaud. So change the default altsetting to 3 when using isochronous urbs. It would be nice to base the altsetting on the detected line speed, but that's hard given the current design. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: fix bug in ohci-hcd.c ohci_restart()David Brownell
A loop on a power-lost resume path used the wrong index. I suspect khubd has been working around such bugs. Noticed by Andreas Mohr <andi@rhlx01.fht-esslingen.de>. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card readerIan Abbott
This patch adds support for an ASK RDR 400 series contactless card reader <http://www.ask.fr/uk/products_and_services/terminals.html> to the ftdi_sio driver's device ID table. The product ID was supplied by Adriano Couto on the ftdi-usb-sio-devel list. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: Adds support for iPlus device.Luiz Fernando N. Capitulino
Adds support in ftdi_sio usbserial driver for USB modems sold by Plus GSM Company in Poland. Signed-off-by: Luiz Fernando Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USBNathan Bronson
This patch adds recognition of the RR-CirKits LocoBuffer USB to the existing FTDI driver. http://www.rr-cirkits.com Signed-off-by: Nathan Bronson <ngb@sns-usa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* definesJean Delvare
We could use the recently added PCI_CLASS_SERIAL_USB_UHCI, PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in more places, for slightly shorter and clearer code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: net2280: set driver data before it is usedAlan Stern
This patch (as671) fixes a bug in the error pathway for the net2280 probe routine. A failure during probe will cause the driver to call pci_get_drvdata before the corresponding pci_set_drvdata has been set. The patch also does a kzalloc conversion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: net2280: check for shared IRQsAlan Stern
This patch (as670) adds a check for whether a shared IRQ was actually generated by the net2280 device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: net2280: send 0-length packets for ep0Alan Stern
This patch (as669) fixes a bug in the net2280 driver. Now it will properly send zero-length packets on ep0 until the control status stage occurs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: net2280: Handle STALLs for 0-length control-IN requestsAlan Stern
This patch (as668) fixes a typo in net2280. The handler for 0-length control-IN requests should check that the endpoint _isn't_ halted before sending a 0-length packet. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: storage: atmel unusual dev updateOlivier Blondeau
Originally submitted by Olivier Blondeau <zeitoun@gmail.com>, with re-diffing by me. Adds a new atmel unusual_dev entry. Signed-off-by: Phil Dibowitz <phil@ipom.com>
2006-04-27[PATCH] USB: Storage: unusual devs updatePhil Dibowitz
This patch removes the Protocol portion of the Iomega Click! device as it's not needed. Not-needed message reported by Kenneth Crudup <kenny@panix.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: add new iTegno usb CDMA 1x card support for pl2303Wang Jun
Add new iTegno usb CDMA 1x card (usbid '0eba:2080') support to pl2303 driver Signed-off-by: Wang Jun <wangjun1974@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: Resource leak fix for whiteheat driverJesper Juhl
We may return from drivers/usb/serial/whiteheat.c::whiteheat_attach() without freeing `result' if we leave via the no_firmware: label. Spotted by the coverity checker as #670 Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-26[PATCH] fix leak in activate_ep_files()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-17[PATCH] isd200: limit to BLK_DEV_IDERandy Dunlap
Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE are set to (y, m) since isd200 calls ide_fix_driveid() in the BLK_DEV_IDE code. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (158 commits) commit 4f705ae3e94ffaafe8d35f71ff4d5c499bb06814 Author: Bjorn Helgaas <bjorn.helgaas@hp.com> Date: Mon Apr 3 17:09:22 2006 -0700 [PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/ dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64. Currently all three arches compile it from arch/i386, which means that ia64 and x86_64 depend on things in arch/i386 that they wouldn't otherwise care about. This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing trailing whitespace) and the associated Makefile changes. All three architectures already set CONFIG_DMI in their top-level Kconfig files. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> ...
2006-04-14[PATCH] pm: print name of failed suspend functionAndrew Morton
Print more diagnostic info to help identify the source of power management suspend failures. Example: usb_hcd_pci_suspend(): pci_set_power_state+0x0/0x1af() returns -22 pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x11b() returns -22 suspend_device(): pci_device_suspend+0x0/0x34() returns -22 Work-in-progress. It needs lots more suspend_report_result() calls sprinkled everywhere. Cc: Patrick Mochel <mochel@digitalimplant.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: add driver for funsoft usb serial deviceGreg Kroah-Hartman
Cc: David Clare <david@funsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: remove __init from usb_console_setupPaul Fulghum
This prevents an Oops if booted with "console=ttyUSB0" but without a USB-serial dongle, and plugged one in afterwards. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: pl2303: added support for OTi's DKU-5 clone cableTomasz Kazmierczak
This patch adds support for a clone of Nokia DKU-5 cable made by Ours Technology Inc for Nokia phones with PopPort (Nokia 3100 and others). The cable uses PL2303 USB-to-serial converter from Prolific Technology Inc. Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: S3C2410: use clk_enable() to ensure 48MHz to OHCI coreBen Dooks
Get the "usb-bus" clock and ensure it is enabled when the OHCI core is in use. It seems that a few bootloaders do not enable the UPLL at startup, which stops the OHCI core having a 48MHz bus clock. The improvements to the clock framework for the s3c24xx now allow the USB PLL to be started and stopped when being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] hid-core.c: fix "input irq status -32 received" for Silvercrest USB ↵Jeffrey Vandenbroucke sign
Keyboard When not using this patch, the kernel will continuously return "input irq status -32 received", while making the keyboard unusable. This can be easely resolved using HID_QUIRK_NOGET. Vendor-ID and Device-ID should be applied to hid-core.c, and making an entry to make use of it. Signed-off-by: Jeffrey Vandenbroucke <jeffrey@wirehead.be> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UHCI: don't track suspended portsAlan Stern
Someone recently posted a bug report where it turned out that uhci-hcd was disagreeing with the UHCI controller over whether or not a port was suspended: The driver thought it wasn't and the hardware thought it was. This patch (as665) fixes the problem and simplifies the driver by removing the internal state-tracking completely. Now the driver just asks the hardware whether a port is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: keyspan-remote bugfixMichael Downey
Signed-off-by: Michael Downey <downey@zymeta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: Rename ax8817x_func() to asix_func() and add utility functions ↵David Hollis
to reduce bloat Now that the ASIX code is supporting more than just the AX88172 devices, make the utility function names more generic: ax8817x_func -> asix_func. Functions that are chip specific now indicate as such: ax88772_func. Additionally, pull some common routines used in initialization and such into simple functions to reduce the verbosity of certain functions such as the bind() routines and to make the error handling consistent across the board. Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: linux/usb/net2280.h common definitionsPete Zaitcev
Move common definitions for NET2280 to <linux/usb/net2280.h>, so that I can use them in prism54usb (it is not merged yet, but I plan to do it soon). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: g_ether, highspeed conformance fixDavid Brownell
Be sure to record the peripheral's ep0 maxpacket size BEFORE using that to initialize the (high speed) device qualifier; that helps a lot with USBCV testing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: usbtest: scatterlist OUT data pattern testingDavid Brownell
Previously, scatterlist tests didn't write patterned data. Given how many corner cases are addresed by them, this was a significant gap in Linux-USB test coverage. Moreover, when peripherals checked for correct data patterns, false error reports would drown out the true ones. This adds the pattern on the way OUT from the host, so scatterlist tests can now be used to uncover bugs like host TX or peripheral RX paths failing for back-to-back short packets. It's easy enough to get an error there with at least one of the {DMA,PIO}{RX,TX} code paths, or run into hardware races that need to be defended against. Note this patch doesn't add checking for correct data patterns on the way IN from peripherals, just a FIXME for later. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: at91 usb driver supend/resume fixesDavid Brownell
AT91: the two USB drivers (OHCI, UDC) got out of sync with various usbcore and driver model PM updates; fix. Also minor fixes to ohci: whitespace/style, MODULE_ALIAS so coldplug works using /sys/.../modalias, and turn off _both_ clocks during suspend. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: gadget zero poisons OUT buffersDavid Brownell
Fill OUT buffers with 0x55 before RX, so that controller driver bugs that mangle data can be more readily detected during testing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: gadgetfs highspeed bugfixDavid Brownell
This catches up to a change in the Kconfig support for highspeed modes; the change predated 2.6.10, and anyone using gadgetfs on a highspeed device would see the kernel wrongly reject the alternate descriptors. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: rndis_host whitespace/comment updatesDavid Brownell
This adds a "avoid proprietary protocols" warnoff, identifying several of the known deficiencies in Microsoft's excuse-for-specification, and fixes some whitespace bugs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: net2280 short rx status fixDavid Brownell
Some patch broke short-OUT packet handling for net2280, making it report illegal status values. This updates the status code so it's correct. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: fix gadget_is_musbhdrc()David Brownell
I submitted the wrong version of the patch teaching about the driver for Mentor's Highspeed Dual Role Controller (HDRC), whoops! This uses the right name for that driver. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: otg hub support is optionalDavid Brownell
USB OTG devices are not required to support external hubs. This adds a configuration option to disable that support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : memory leack fixmatthieu castet
this patch fix leak of memory allocated to intr if allocation of sc->urb_int fails. Found by the Coverity checker. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : null pointer dereference fixmatthieu castet
this patch fix potential null pointer dereference. Found by the Coverity checker. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : support geodematthieu castet
- increase ack timeout for slow system (geode 233MHz where HZ=100) - reset the cmv ack flag when rebooting Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : cosmeticmatthieu castet
- improve debug trace in order to make easy to solve user problems. - indent some code - increase version number Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: drivers/usb/core/: remove unused exportsAdrian Bunk
This patch removes the following unused EXPORT_SYMBOL's: - hub.c: usb_set_device_state - usb.c: usb_alloc_dev - usb.c: usb_disconnect Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: pegasus driver bugfixPetko Manolov
Attached is a patch that fixes nasty bug, which i am afraid was there for a long time. It was spotted by Andre Draszik <kernel@andred.net>. From: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: add new wacom devices to usb hid-core listPing Cheng
This patch adds support for DTF 521, Intuos3 12x12 and 12x19 Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: wacom tablet driver updatePing Cheng
This patch adds support for DTF 521, Intuos3 12x12, and 12x19; fixes minor data report bugs. Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: g_file_storage: use module_param_array_named macroAlan Stern
Randy Dunlap pointed out that there now is a module_param_array_named macro available. This patch (as666) updates g_file_storage to make use of it. It also adds a comment listing the specifications documents used in the design of the driver's SCSI operation (at Pat LaVarre's request). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-28 06:41:42 +0000