summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-07-29video: da8xx-fb: fix flicker due to 1 frame delay in updated frameManjunathappa, Prakash
Flicker/tearing effect is observed with current FB driver. Issue is because of 2 active DMA channels ping ponging among them along with usage of 2 DDR ping pong buffers in driver. Application unaware of active DMA channel keeps updating frame being displayed, this leads to tearing effect. Below steps describes the issue: 1)Initially assume both buffers FB0 and FB1 are programmed for buffer-0. 2)On EOF0: Program FB0 for buffer-1, indicate(wake up) application to fill up buffer-0. As FB1 is active and continues to DMA buffer-0 (which is being filled), leading to tearing/flickering issue. 3)On EOF1: Program FB1 for buffer-0, indicate(wake up) application to fill up buffer-1. As FB0 is active and continues to DMA buffer-1(which is being filled), leading to tearing/flickering issue. 4)On EOF0: Program FB0 for buffer-1, indicate(wake up) application to fill up buffer-0. As FB1 is active and continues to DMA buffer-0(which is being filled), leading to tearing/flickering issue. ... Above steps depict that issue is because of 1 frame delay in frame panned by application. Patch fixes the issue by keeping track free DMA channel and configures it in drivers PAN callback so that panned frame from application gets displayed in next frame period. Wiki below describes the issue in detail and it also has link to application with which issue can be reproduced. http://processors.wiki.ti.com/index.php/DA8xx_LCDC_Linux_FB_FAQs Signed-off-by: Nellutla, Aditya <aditya.n@ti.com> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-07-29video: da8xx-fb rev2: fix disabling of palette completion interruptManjunathappa, Prakash
Writing '1' to particular bit of IRQENABLE_CLEAR register disables the corresponding interrupt on revision 2 LCDC. This register was wrongly configured to disable all previous enabled interrupts instead of disabling only palette completion interrupt. Patch fixes it by clearing only palette completion interrupt bit. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-07-29da8xx-fb: add missing FB_BLANK operationsYegor Yefremov
add FB_BLANK_NORMAL, FB_BLANK_VSYNC_SUSPEND and FB_BLANK_HSYNC_SUSPEND modes (copy drivers/video/omap2/omapfb/omapfb-main.c implementation). Otherwise X-server will complain about invalid parameter. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-07-28Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull embedded i2c changes from Wolfram Sang: "Changes for the "embedded" part of the I2C subsystem: - lots of devicetree conversions of drivers (and preparations for that) - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin - Rafael's struct dev_pm_ops conversion patches for I2C - usual driver cleanups and fixes All patches have been in linux-next for an apropriate time and all patches touching files outside of i2c-folders should have proper acks from the maintainers." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits) Revert "i2c: tegra: convert normal suspend/resume to *_noirq" I2C: MV64XYZ: Add Device Tree support i2c: stu300: use devm managed resources i2c: i2c-ocores: support for 16bit and 32bit IO V4L/DVB: mfd: use reg_shift instead of regstep i2c: i2c-ocores: Use reg-shift property i2c: i2c-ocores: DT bindings and minor fixes. i2c: mv64xxxx: remove EXPERIMENTAL tag i2c-s3c2410: Use plain pm_runtime_put() i2c: s3c2410: Fix pointer type passed to of_match_node() i2c: mxs: Set I2C timing registers for mxs-i2c i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file. i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data. i2c:i2c-bfin-twi: include twi head file i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load. i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly. i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves. i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios". i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios. i2c-mv64xxxx: allow more than one driver instance ... Conflicts: drivers/i2c/busses/i2c-nomadik.c
2012-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several bug fixes, some to new features appearing in this merge window, some that have been around for a while. I have a short list of known problems that need to be sorted out, but all of them can be solved easily during the run up to 3.6-final. I'll be offline until Sunday afternoon, but nothing need hold up 3.6-rc1 and the close of the merge window, networking wise, at this point. 1) Fix interface check in ipv4 TCP early demux, from Eric Dumazet. 2) Fix a long standing bug in TCP DMA to userspace offload that can hang applications using MSG_TRUNC, from Jiri Kosina. 3) Don't allow TCP_USER_TIMEOUT to be negative, from Hangbin Liu. 4) Don't use GFP_KERNEL under spinlock in kaweth driver, from Dan Carpenter" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: perform DMA to userspace only if there is a task waiting for it Revert "openvswitch: potential NULL deref in sample()" ipv4: fix TCP early demux net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handling USB: kaweth.c: use GFP_ATOMIC under spin_lock tcp: Add TCP_USER_TIMEOUT negative value check bcma: add missing iounmap on error path bcma: fix regression in interrupt assignment on mips mac80211_hwsim: fix possible race condition in usage of info->control.sta & control.vif
2012-07-28thinkpad_acpi: Free hotkey_keycode_map after unregistering tpacpi_inputdevLi Dongyang
We should free hotkey_keycode_map after unregistering tpacpi_inputdev, to aviod use after free like this: [ 99.408388] ============================================================================= [ 99.408393] BUG kmalloc-64 (Not tainted): Poison overwritten [ 99.408394] ----------------------------------------------------------------------------- [ 99.408394] [ 99.408398] INFO: 0xf2751962-0xf2751995. First byte 0x98 instead of 0x6b [ 99.408402] INFO: Allocated in 0xfdc88c28 age=79 cpu=0 pid=1329 [ 99.408407] __slab_alloc.isra.50.constprop.56+0x49f/0x533 [ 99.408410] kmem_cache_alloc_trace+0x10d/0x140 [ 99.408412] 0xfdc88c28 [ 99.408414] 0xfdc898cc [ 99.408417] do_one_initcall+0x112/0x160 [ 99.408420] sys_init_module+0xe6d/0x1bc0 [ 99.408422] sysenter_do_call+0x12/0x28 [ 99.408427] INFO: Freed in hotkey_exit+0x50/0xb0 [thinkpad_acpi] age=14 cpu=1 pid=1333 [ 99.408429] __slab_free+0x3d/0x30b [ 99.408431] kfree+0x129/0x140 [ 99.408435] hotkey_exit+0x50/0xb0 [thinkpad_acpi] [ 99.408438] ibm_exit+0xe3/0x1a0 [thinkpad_acpi] [ 99.408441] thinkpad_acpi_module_exit+0x35/0x208 [thinkpad_acpi] [ 99.408443] sys_delete_module+0x11f/0x280 [ 99.408445] sysenter_do_call+0x12/0x28 [ 99.408447] INFO: Slab 0xf4d5ea20 objects=17 used=17 fp=0x (null) flags=0x40000080 [ 99.408449] INFO: Object 0xf2751960 @offset=2400 fp=0xf2751780 [ 99.408449] [ 99.408452] Bytes b4 f2751950: 64 02 00 00 ae ce fe ff 5a 5a 5a 5a 5a 5a 5a 5a d.......ZZZZZZZZ [ 99.408454] Object f2751960: 6b 6b 98 00 ec 00 8e 00 ee 00 6b 6b e3 00 bf 00 kk........kk.... [ 99.408456] Object f2751970: c2 00 6b 6b 6b 6b cd 00 6b 6b 6b 6b 6b 6b e1 00 ..kkkk..kkkkkk.. [ 99.408458] Object f2751980: e0 00 e4 00 6b 6b 74 01 73 00 72 00 71 00 94 00 ....kkt.s.r.q... [ 99.408460] Object f2751990: 6b 6b 6b 6b f8 00 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkk..kkkkkkkkk. [ 99.408462] Redzone f27519a0: bb bb bb bb .... Signed-off-by: Li Dongyang <Jerry87905@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28thinkpad_acpi: Fix a memory leak during module exitLi Dongyang
We should free the thinkpad_id.nummodel_str during exit as it's allocated in get_thinkpad_module_data(). Signed-off-by: Li Dongyang <Jerry87905@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28thinkpad_acpi: Flush the workqueue before freeing tpacpi_ledsLi Dongyang
We init work_struct within tpacpi_leds, and we should free tpacpi_leds after the workqueue is empty, in case of the work_struct is referenced after free. This script could trigger the OOPS: #!/bin/sh while true do modprobe -r thinkpad_acpi modprobe thinkpad_acpi done And the OOPS looks like this: [ 73.863557] BUG: unable to handle kernel paging request at 45440000 [ 73.863925] IP: [<c1051d65>] process_one_work+0x25/0x3b0 [ 73.864749] *pde = 00000000 [ 73.865571] Oops: 0000 [#1] PREEMPT SMP [ 73.866443] Modules linked in: thinkpad_acpi(-) nvram netconsole configfs aes_i586 cryptd aes_generic joydev btusb bluetooth arc4 snd_hda_codec_analog iwl4965 uhci_hcd pcmcia microcode iwlegacy mac80211 cfg80211 firewire_ohci firewire_core kvm_intel kvm snd_hda_intel acpi_cpufreq mperf ehci_hcd yenta_socket pcmcia_rsrc crc_itu_t sr_mod snd_hda_codec processor pcmcia_core i2c_i801 usbcore lpc_ich cdrom serio_raw psmouse coretemp rfkill e1000e snd_pcm snd_page_alloc snd_hwdep snd_timer snd pcspkr evdev ac battery thermal soundcore usb_common intel_agp intel_gtt tp_smapi(O) thinkpad_ec(O) ext4 crc16 jbd2 mbcache sd_mod ata_piix ahci libahci libata scsi_mod nouveau button video mxm_wmi wmi i2c_algo_bit drm_kms_helper ttm drm agpgart i2c_core [last unloaded: nvram] [ 73.866676] [ 73.866676] Pid: 62, comm: kworker/u:4 Tainted: G O 3.5.0-1-ARCH #1 LENOVO 7662CTO/7662CTO [ 73.866676] EIP: 0060:[<c1051d65>] EFLAGS: 00010002 CPU: 1 [ 73.866676] EIP is at process_one_work+0x25/0x3b0 [ 73.866676] EAX: 45440065 EBX: f5545090 ECX: 00000088 EDX: 45440000 [ 73.866676] ESI: f568ff40 EDI: c164dd40 EBP: f5705f98 ESP: f5705f68 [ 73.866676] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 73.866676] CR0: 8005003b CR2: 45440000 CR3: 357ed000 CR4: 000007d0 [ 73.866676] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 73.866676] DR6: ffff0ff0 DR7: 00000400 [ 73.866676] Process kworker/u:4 (pid: 62, ti=f5704000 task=f5700540 task.ti=f5704000) [ 73.866676] Stack: [ 73.866676] f56fbf24 00000001 f5705f78 c10683e0 c1294950 00000000 00000000 f568ff40 [ 73.866676] 00000000 f568ff40 f568ff50 c164dd40 f5705fb8 c1052589 c1060c7e c15b9300 [ 73.866676] c164dd40 00000000 f568ff40 c1052490 f5705fe4 c10570b2 00000000 f568ff40 [ 73.866676] Call Trace: [ 73.866676] [<c10683e0>] ? default_wake_function+0x10/0x20 [ 73.866676] [<c1294950>] ? dev_get_drvdata+0x20/0x20 [ 73.866676] [<c1052589>] worker_thread+0xf9/0x280 [ 73.866676] [<c1060c7e>] ? complete+0x4e/0x60 [ 73.866676] [<c1052490>] ? manage_workers.isra.24+0x1c0/0x1c0 [ 73.866676] [<c10570b2>] kthread+0x72/0x80 [ 73.866676] [<c1057040>] ? kthread_freezable_should_stop+0x50/0x50 [ 73.866676] [<c13c20fe>] kernel_thread_helper+0x6/0x10 [ 73.866676] Code: bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 24 3e 8d 74 26 00 89 c6 8b 02 89 d3 c7 45 f0 00 00 00 00 89 c2 30 d2 a8 04 0f 44 55 f0 <8b> 02 89 55 f0 89 da c1 ea 0a 89 45 ec 89 d8 8b 4d ec c1 e8 04 [ 73.866676] EIP: [<c1051d65>] process_one_work+0x25/0x3b0 SS:ESP 0068:f5705f68 [ 73.866676] CR2: 0000000045440000 [ 73.866676] ---[ end trace 4d8a1887edca08c5 ]--- [ 73.866676] note: kworker/u:4[62] exited with preempt_count 1 Signed-off-by: Li Dongyang <Jerry87905@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28dell-laptop: Add 6 machines to touchpad led quirkAceLan Kao
Add the following machines into quirk, Isnpiron 5420, Isnpiron 5520, Isnpiron 5720, Isnpiron 7420, Isnpiron 7520, Isnpiron 7720 Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28ACER: Fix Smatch double-free issueMarek Vasut
The patch 6ae3a0876185: "ACER: Add support for accelerometer sensor" from Jun 1, 2012, leads to the following Smatch warning: drivers/platform/x86/acer-wmi.c:1886 acer_wmi_accel_destroy() error: don't call input_free_device() after input_unregister_device() drivers/platform/x86/acer-wmi.c 1883 static void acer_wmi_accel_destroy(void) 1884 { 1885 input_unregister_device(acer_wmi_accel_dev); 1886 input_free_device(acer_wmi_accel_dev); 1887 } Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Fengguang Wu <wfg@linux.intel.com> Cc: joeyli <jlee@suse.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28ACER: Fix up sparse warningMarek Vasut
drivers/platform/x86/acer-wmi.c:1836:18: sparse: Using plain integer as NULL pointer drivers/platform/x86/acer-wmi.c:1836: 1833 1834 BUG_ON(!name || !ah); 1835 > 1836 handle = 0; 1837 status = acpi_get_devices(prop, acer_wmi_get_handle_cb, 1838 (void *)name, &handle); 1839 Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Fengguang Wu <wfg@linux.intel.com> Cc: joeyli <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28asus-nb-wmi: add some video toggle keysAceLan Kao
There are some new video switch keys that used by newer machines. 0xA0 - SDSP HDMI only 0xA1 - SDSP LCD + HDMI 0xA2 - SDSP CRT + HDMI 0xA3 - SDSP TV + HDMI But in Linux, there is no suitable userspace application to handle this, so, mapping them all to KEY_SWITCHVIDEOMODE. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28asus-nb-wmi: add wapf quirk for ASUS machinesAceLan Kao
The BIOS of these machines will try to enable/disable wifi/bt in their own sqeuence. It won't read the enable/disable parameter in WMI command, but just iterates the wifi/bt's status described below 1st. enable wifi, enable bt 2nd. disable wifi, enable bt 3rd. enable wifi, disable bt 4th. disable wifi, disable bt That will totally mess up the rfkill status, since we will try to read wifi and bt's status and reset it again while booting up. To avoid this, these machines should set the wapf value to 4, that will let software totally control the wifi/bt's status and BIOS will do nothing instead of sending out the 0x88(KEY_RFKILL) event instead of 0x5e(wifi enable), 0x5f(wifi diable), 0x7d(bt enable), and 0x7e(bt disable) through WMI. With this patch[1], it will handle the KEY_RFKILL event correctly and will block/unblock wifi and bt together. 1. https://lkml.org/lkml/2012/5/21/75 Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28classmate-laptop: Fix extra keys hardware id.Miguel Gómez
Since ACPI devices ids were changed to use always upper-case letters, the ACPI id of the extra keys (FNBT0000) was not maching the one defined in the driver (FnBT0000), causing the extra keys not to work. The patch replaces the driver id with the one reported by ACPI, fixing the problem. Signed-off-by: Miguel Gómez <magomez@igalia.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28classmate-laptop: Add support for Classmate V4 accelerometer.Miguel Gómez
Classmate V4 laptop includes a new accelerometer that can't be handled by previous driver. This patch adds a new driver to handle it. [mjg: Fixed up the driver pm stuff] Signed-off-by: Miguel Gómez <magomez@igalia.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28asus-wmi: enable resume on lid openAceLan Kao
According to the ASUS WMI spec., to enable resume on lid open should use the device ID(0x00120032), but it doesn't work indeed. After discussing with ASUS' BIOS engineer, they say wake on lid open doesn't have a uniq device ID(0x00120032) in the BIOS. It shares the same device ID with deep S3(0x00120031), and the deep S3(resume on lid open) is disable by default. Adding this option in asus wmi sysfs /sys/devices/platform/<platform>/lid_resume so that userspace apps can enable/disable this feature by themselves. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28asus-wmi: control backlight power through WMI, not ACPIAceLan Kao
BugLink: https://bugs.launchpad.net/bugs/1000146 Some h/w that can adjust screen brightness through ACPI functions, but can't turn on/off the backlight power correctly. So, we list those h/w in quirks and try to turn on/off the backlight power through WMI. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28samsung-laptop: support R40/R41Corentin Chary
> Chassis Information > Manufacturer: SAMSUNG ELECTRONICS CO., LTD. > Type: Other Type should be "Notebook", "Laptop", .. not "Other". Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28acpi/video_detect: blacklist samsung x360Corentin Chary
On Samsung X360, the BIOS will set a flag (VDRV) if the generic ACPI backlight device is used. This flag will definitively break the backlight interface (even the vendor interface) untill next reboot. It's why we should prevent video.ko from being used here and we can't rely on a later call to acpi_video_unregister(). Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28samsung-laptop: X360 ACPI backlight device is brokenCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28drivers-platform-x86: use acpi_video_dmi_promote_vendor()Corentin Chary
Instead of using directly acpi_video_unregister(), use acpi_video_dmi_promote_vendor() (and make it call acpi_video_unregister() if needed) Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28acpi: add a way to promote/demote vendor backlight driversCorentin Chary
Instead of adding a big blacklist in video_detect.c to set ACPI_VIDEO_BACKLIGHT_DMI_VENDOR correctly, let external modules promote or demote themselves when they know the generic video module won't work. Currently drivers where using acpi_video_unregister() directly but: - That didn't respect any acpi_backlight=[video|vendor] parameter provided by the user. - Any later call to acpi_video_register() would still re-load the generic video module (and some gpu drivers are doing that). This patch fix those two issues. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28ACER: Add support for accelerometer sensorMarek Vasut
This device is present on Iconia Tab W500. Signed-off-by: Marek Vasut <marex@denx.de> Cc: joeyli <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-28asus-wmi: use ASUS_WMI_METHODID_DSTS2 as default DSTS ID.Alex Hung
According to responses from the BIOS team, ASUS_WMI_METHODID_DSTS2 (0x53545344) will be used as future DSTS ID. In addition, calling asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, 0, 0, NULL) returns ASUS_WMI_UNSUPPORTED_METHOD in new ASUS laptop PCs. This patch fixes no DSTS ID will be assigned in this case. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@kernel.org
2012-07-27random: mix in architectural randomness in extract_buf()H. Peter Anvin
Mix in any architectural randomness in extract_buf() instead of xfer_secondary_buf(). This allows us to mix in more architectural randomness, and it also makes xfer_secondary_buf() faster, moving a tiny bit of additional CPU overhead to process which is extracting the randomness. [ Commit description modified by tytso to remove an extended advertisement for the RDRAND instruction. ] Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: DJ Johnston <dj.johnston@intel.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-27Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linusRussell King
2012-07-27Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== These fixes are intended for the 3.6 stream. Hauke Mehrtens provides a pair of bcma fixes, one to fix a build regression on mips and another to correct a pair of missing iounmap calls. Thomas Huehn offers a mac80211_hwsim fix to avoid a possible use-after-free bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-27hwmon: (applesmc) Decode and act on read/write status codesHenrik Rydberg
The behavior of the SMC has changed several times over the years, causing read failures in the driver. It seems the problem can be explained by a shift in SMC speed combined with improper action on status codes. We should first wait for the SMC to settle, which was the most frequent response on the old slow machines. Then, if the SMC is busy, we need to try again later by resending the command. This was the most likely response until 2012. Now, with a shorter wait time, we are again most likely to poll while the SMC is settling, and as a result we see high failure rates on many old and new models. With the distinction between busy and failure, we can also wait longer before retrying, without sacrificing speed. This seems to bring failures down to virtually zero on all models. Tested on: MBA1,1 MBA3,1 MBA5,1 MBA5,2 MBP9,2 Tested-by: Adam Somerville <adamsomerville@gmail.com> Tested-by: Hubert Eichner <hubert.georg.eichner@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-27hwmon: (jc42) Don't reset hysteresis on device removalJean Delvare
Restoring the configuration register on device removal has the side effect of also resetting the hysteresis value. This is inconsistent as the other limits are not reset, only hysteresis. So, following the principle of least surprise, preserve the hysteresis value when restoring the configuration register. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-27hwmon: (jc42) Simplify hysteresis maskJean Delvare
Define JC42_CFG_HYST_MASK as the mask _before_ shifting instead of after shifting. This simplifies the current code slightly, and will simplify the code to come even more. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-27hwmon: (acpi_power_meter) Fix build warningGuenter Roeck
Commit c5dec0182256361a3f823316e8fb85263f76efe7 (acpi_power_meter: Use struct dev_pm_ops for power management) introduced the following build warning. It is seen if CONFIG_PM_SLEEP is not defined. acpi_power_meter.c:930:12: warning: acpi_power_meter_resume defined but not used Fix it. Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-27USB: kaweth.c: use GFP_ATOMIC under spin_lockDan Carpenter
The problem is that we call this with a spin lock held. The call tree is: kaweth_start_xmit() holds kaweth->device_lock. -> kaweth_async_set_rx_mode() -> kaweth_control() -> kaweth_internal_control_msg() The kaweth_internal_control_msg() function is only called from kaweth_control() which used GFP_ATOMIC for its allocations. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-27RDMA/ucma: Convert open-coded equivalent to memdup_user()Roland Dreier
Suggested by scripts/coccinelle/api/memdup_user.cocci. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-27RDMA/ocrdma: Fix check of GSI CQsRoland Dreier
It looks like one check was accidentally duplicated, and the other 3 checks were left out. This was detected by scripts/coccinelle/tests/doubletest.cocci: drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:895:6-54: duplicated argument to && or || Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-27RDMA/cma: Use PTR_RET rather than if (IS_ERR(...)) + PTR_ERRFengguang Wu
Suggested by scripts/coccinelle/api/ptr_ret.cocci. Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-27Merge tag 'tty-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY/Serial patches from Greg Kroah-Hartman: "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and serial drivers. They were cherry-picked from the tty-next branch of the tty git tree, as they are small and "obvious" fixes. The larger changes, as mentioned before, will be saved for the 3.7-rc1 merge window. All of these changes have been in the linux-next releases for quite a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pch_uart: Fix parity setting issue pch_uart: Fix rx error interrupt setting issue pch_uart: Fix missing break for 16 byte fifo tty ldisc: Close/Reopen race prevention should check the proper flag pch_uart: Add eg20t_port lock field, avoid recursive spinlocks vt: fix race in vt_waitactive() serial/of-serial: Add LPC3220 standard UART compatible string serial/8250: Add LPC3220 standard UART type serial_core: Update buffer overrun statistics. serial: samsung: Fixed wrong comparison for baudclk_rate
2012-07-27Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here's a handful of powerpc patches, a couple of regression fixes for problems introduced in the main batch in this merge window, a couple of defconfig updates, and some trivials. The radeonfb one is something that was long standing in SLES which I forgot to pickup earlier." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ftrace: Trace function graph entry before updating index radeonfb: Add quirk for the graphics adapter in some JSxx powerpc: Lack of firmware flash support is not an error powerpc: Enable pseries hardware RNG and crypto modules powerpc: Update g5_defconfig powerpc/kvm/bookehv: Fix build regression powerpc: Set stack limit properly in crit_transfer_to_handler
2012-07-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-07-27ATA: sata_mv: Add device tree supportAndrew Lunn
Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27Merge branch 'v3.5-rc7-fixes' into v3.5-rc7-dt-v3Andrew Lunn
Merge in branch already pulled. Fulfils dependancies needed by this patchset.
2012-07-27Merge tag 'spi-3.6' into v3.5-rc7-dt-v3Andrew Lunn
spi: Updates for 3.6 Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things.
2012-07-27dm thin: commit before gathering statusAlasdair G Kergon
Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: add read only and fail io modesJoe Thornber
Add read-only and fail-io modes to thin provisioning. If a transaction commit fails the pool's metadata device will transition to "read-only" mode. If a commit fails once already in read-only mode the transition to "fail-io" mode occurs. Once in fail-io mode the pool and all associated thin devices will report a status of "Fail". Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: introduce dm_pool_abort_metadataJoe Thornber
Introduce dm_pool_abort_metadata to abort the current metadata transaction. Generally this will only be called when bad things are happening and dm-thin is trying to roll back to a good state for read-only mode. It's complicated by the fact that the metadata device may have failed completely causing the abort to be unable to read the old transaction. In this case the metadata object is placed in a 'fail' mode and everything fails apart from destroying it. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: introduce dm_pool_metadata_set_read_onlyJoe Thornber
Introduce dm_pool_metadata_set_read_only to put the underlying block manager into read-only mode. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: introduce dm_bm_set_read_onlyJoe Thornber
Introduce dm_bm_set_read_only to switch the block manager into a read-only mode. To be used when dm-thin degrades due to io errors on the metadata device. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: reduce number of metadata commitsJoe Thornber
Reduce the number of metadata commits by using dm_thin_changed_this_transaction to check if metadata was changed on a per thin device granularity. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: add dm_thin_changed_this_transactionJoe Thornber
Introduce dm_thin_changed_this_transaction to dm-thin-metadata to publish a useful bit of information we're already tracking. This will help dm thin decide when to commit. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-15 12:44:41 +0000