From 19040c0bc8efcb767221d8ef7bb9c32ff0586179 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 24 Mar 2011 13:54:31 +0000 Subject: dm mpath: fail message ioctl if specified path is not valid Fail the reinstate_path and fail_path message ioctl if the specified path is not valid. The message ioctl would succeed for the 'reinistate_path' and 'fail_path' messages even if action was not taken because the specified device was not a valid path of the multipath device. Before, when /dev/vdb is not a path of mpathb: $ dmsetup message mpathb 0 reinstate_path /dev/vdb $ echo $? 0 After: $ dmsetup message mpathb 0 reinstate_path /dev/vdb device-mapper: message ioctl failed: Invalid argument Command failed $ echo $? 1 Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/md/dm-mpath.c') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 4b0b63c290a6..52f0de394632 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1065,7 +1065,7 @@ out: static int action_dev(struct multipath *m, struct dm_dev *dev, action_fn action) { - int r = 0; + int r = -EINVAL; struct pgpath *pgpath; struct priority_group *pg; @@ -1669,7 +1669,7 @@ out: *---------------------------------------------------------------*/ static struct target_type multipath_target = { .name = "multipath", - .version = {1, 2, 0}, + .version = {1, 3, 0}, .module = THIS_MODULE, .ctr = multipath_ctr, .dtr = multipath_dtr, -- cgit v1.2.3 From a490a07a67b7a37f588021410e06b721a752fc34 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 24 Mar 2011 13:54:33 +0000 Subject: dm mpath: allow table load with no priority groups This patch adjusts the multipath target to allow a table with both 0 priority groups and 0 for the initial priority group number. If any mpath device is held open when all paths in the last priority group have failed, userspace multipathd will attempt to reload the associated DM table to reflect the fact that the device no longer has any priority groups. But the reload attempt always failed because the multipath target did not allow 0 priority groups. All multipath target messages related to priority group (enable_group, disable_group, switch_group) will handle a priority group of 0 (will cause error). When reloading a multipath table with 0 priority groups, userspace multipathd must be updated to specify an initial priority group number of 0 (rather than 1). Signed-off-by: Mike Snitzer Cc: Babu Moger Acked-by: Hannes Reinecke Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/md/dm-mpath.c') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 52f0de394632..a550a057d991 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -844,8 +844,8 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, { /* target parameters */ static struct param _params[] = { - {1, 1024, "invalid number of priority groups"}, - {1, 1024, "invalid initial priority group number"}, + {0, 1024, "invalid number of priority groups"}, + {0, 1024, "invalid initial priority group number"}, }; int r; @@ -879,6 +879,13 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, if (r) goto bad; + if ((!m->nr_priority_groups && next_pg_num) || + (m->nr_priority_groups && !next_pg_num)) { + ti->error = "invalid initial priority group"; + r = -EINVAL; + goto bad; + } + /* parse the priority groups */ while (as.argc) { struct priority_group *pg; @@ -1415,7 +1422,7 @@ static int multipath_status(struct dm_target *ti, status_type_t type, else if (m->current_pg) pg_num = m->current_pg->pg_num; else - pg_num = 1; + pg_num = (m->nr_priority_groups ? 1 : 0); DMEMIT("%u ", pg_num); -- cgit v1.2.3