From 5c7f0e083d2d98ba14ddd10e88f001a0ead4cae4 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 19 Dec 2011 15:51:38 -0800 Subject: Revert "mmc: enable runtime PM by default" When SDIO runtime PM was originally introduced, we immediately faced two regressions with two different chipsets, and in response decided not to enable it by default. With the recent work on the 8686 we hoped we found all the gotchas, so 08da834 did make sense (at least experimentally). Unfortunately we now see that some setups out there still refuse to work when SDIO runtime PM is enabled by default (see http://www.spinics.net/lists/linux-mmc/msg11161.html), and obviously we can't live with these kind of regressions. This reverts commit 08da834a24312157f512224691ad1fddd11c1073. Signed-off-by: Ohad Ben-Cohen Cc: Daniel Drake Signed-off-by: Chris Ball --- drivers/mmc/core/host.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'drivers/mmc/core/host.c') diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e8a5eb38748b..d31c78b72b0f 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -302,17 +302,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->max_blk_size = 512; host->max_blk_count = PAGE_CACHE_SIZE / 512; - /* - * Enable runtime power management by default. This flag was added due - * to runtime power management causing disruption for some users, but - * the power on/off code has been improved since then. - * - * We'll enable this flag by default as an experiment, and if no - * problems are reported, we will follow up later and remove the flag - * altogether. - */ - host->caps = MMC_CAP_POWER_OFF_CARD; - return host; free: -- cgit v1.2.3 From 597dd9d79cfbbb1636d00a7fd0880355d9b20c41 Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Mon, 14 Nov 2011 13:53:29 +0530 Subject: mmc: core: Use delayed work in clock gating framework Current clock gating framework disables the MCI clock as soon as the request is completed and enables it when a request arrives. This aggressive clock gating framework, when enabled, cause following issues: When there are back-to-back requests from the Queue layer, we unnecessarily end up disabling and enabling the clocks between these requests since 8MCLK clock cycles is a very short duration compared to the time delay between back to back requests reaching the MMC layer. This overhead can effect the overall performance depending on how long the clock enable and disable calls take which is platform dependent. For example on some platforms we can have clock control not on the local processor, but on a different subsystem and the time taken to perform the clock enable/disable can add significant overhead. Also if the host controller driver decides to disable the host clock too when mmc_set_ios function is called with ios.clock=0, it adds additional delay and it is highly possible that the next request had already arrived and unnecessarily blocked in enabling the clocks. This is seen frequently when the processor is executing at high speeds and in multi-core platforms thus reduces the overall throughput compared to if clock gating is disabled. Fix this by delaying turning off the clocks by posting request on delayed workqueue. Also cancel the unscheduled pending work, if any, when there is access to card. sysfs entry is provided to tune the delay as needed, default value set to 200ms. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Signed-off-by: Chris Ball --- Documentation/mmc/mmc-dev-attrs.txt | 10 +++++++ drivers/mmc/core/host.c | 57 ++++++++++++++++++++++++++++++++++--- include/linux/mmc/host.h | 4 ++- 3 files changed, 66 insertions(+), 5 deletions(-) (limited to 'drivers/mmc/core/host.c') diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt index 8898a95b41e5..b0245565875a 100644 --- a/Documentation/mmc/mmc-dev-attrs.txt +++ b/Documentation/mmc/mmc-dev-attrs.txt @@ -64,3 +64,13 @@ Note on Erase Size and Preferred Erase Size: size specified by the card. "preferred_erase_size" is in bytes. + +SD/MMC/SDIO Clock Gating Attribute +================================== + +Read and write access is provided to following attribute. +This attribute appears only if CONFIG_MMC_CLKGATE is enabled. + + clkgate_delay Tune the clock gating delay with desired value in milli seconds. + +echo > /sys/class/mmc_host/mmcX/clkgate_delay diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index d31c78b72b0f..817a76039743 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -54,6 +54,31 @@ static DEFINE_IDR(mmc_host_idr); static DEFINE_SPINLOCK(mmc_host_lock); #ifdef CONFIG_MMC_CLKGATE +static ssize_t clkgate_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + return snprintf(buf, PAGE_SIZE, "%lu millisecs\n", + host->clkgate_delay); +} + +static ssize_t clkgate_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + unsigned long flags, value; + + if (kstrtoul(buf, 0, &value)) + return -EINVAL; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clkgate_delay = value; + spin_unlock_irqrestore(&host->clk_lock, flags); + + pr_info("%s: clock gate delay set to %lu ms\n", + mmc_hostname(host), value); + return count; +} /* * Enabling clock gating will make the core call out to the host @@ -114,7 +139,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host) static void mmc_host_clk_gate_work(struct work_struct *work) { struct mmc_host *host = container_of(work, struct mmc_host, - clk_gate_work); + clk_gate_work.work); mmc_host_clk_gate_delayed(host); } @@ -131,6 +156,8 @@ void mmc_host_clk_hold(struct mmc_host *host) { unsigned long flags; + /* cancel any clock gating work scheduled by mmc_host_clk_release() */ + cancel_delayed_work_sync(&host->clk_gate_work); mutex_lock(&host->clk_gate_mutex); spin_lock_irqsave(&host->clk_lock, flags); if (host->clk_gated) { @@ -180,7 +207,8 @@ void mmc_host_clk_release(struct mmc_host *host) host->clk_requests--; if (mmc_host_may_gate_card(host->card) && !host->clk_requests) - queue_work(system_nrt_wq, &host->clk_gate_work); + queue_delayed_work(system_nrt_wq, &host->clk_gate_work, + msecs_to_jiffies(host->clkgate_delay)); spin_unlock_irqrestore(&host->clk_lock, flags); } @@ -213,8 +241,13 @@ static inline void mmc_host_clk_init(struct mmc_host *host) host->clk_requests = 0; /* Hold MCI clock for 8 cycles by default */ host->clk_delay = 8; + /* + * Default clock gating delay is 200ms. + * This value can be tuned by writing into sysfs entry. + */ + host->clkgate_delay = 200; host->clk_gated = false; - INIT_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); + INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); spin_lock_init(&host->clk_lock); mutex_init(&host->clk_gate_mutex); } @@ -229,7 +262,7 @@ static inline void mmc_host_clk_exit(struct mmc_host *host) * Wait for any outstanding gate and then make sure we're * ungated before exiting. */ - if (cancel_work_sync(&host->clk_gate_work)) + if (cancel_delayed_work_sync(&host->clk_gate_work)) mmc_host_clk_gate_delayed(host); if (host->clk_gated) mmc_host_clk_hold(host); @@ -237,6 +270,17 @@ static inline void mmc_host_clk_exit(struct mmc_host *host) WARN_ON(host->clk_requests > 1); } +static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) +{ + host->clkgate_delay_attr.show = clkgate_delay_show; + host->clkgate_delay_attr.store = clkgate_delay_store; + sysfs_attr_init(&host->clkgate_delay_attr.attr); + host->clkgate_delay_attr.attr.name = "clkgate_delay"; + host->clkgate_delay_attr.attr.mode = S_IRUGO | S_IWUSR; + if (device_create_file(&host->class_dev, &host->clkgate_delay_attr)) + pr_err("%s: Failed to create clkgate_delay sysfs entry\n", + mmc_hostname(host)); +} #else static inline void mmc_host_clk_init(struct mmc_host *host) @@ -247,6 +291,10 @@ static inline void mmc_host_clk_exit(struct mmc_host *host) { } +static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) +{ +} + #endif /** @@ -335,6 +383,7 @@ int mmc_add_host(struct mmc_host *host) #ifdef CONFIG_DEBUG_FS mmc_add_host_debugfs(host); #endif + mmc_host_clk_sysfs_init(host); mmc_start_host(host); register_pm_notifier(&host->pm_notify); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index cea064f73514..706f72279a17 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -253,10 +253,12 @@ struct mmc_host { int clk_requests; /* internal reference counter */ unsigned int clk_delay; /* number of MCI clk hold cycles */ bool clk_gated; /* clock gated */ - struct work_struct clk_gate_work; /* delayed clock gate */ + struct delayed_work clk_gate_work; /* delayed clock gate */ unsigned int clk_old; /* old clock value cache */ spinlock_t clk_lock; /* lock for clk fields */ struct mutex clk_gate_mutex; /* mutex for clock gating */ + struct device_attribute clkgate_delay_attr; + unsigned long clkgate_delay; #endif /* host specific block data */ -- cgit v1.2.3 From 4137e50494cb3496fbb6ccd27aa7b6d7c9634c1e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 5 Dec 2011 10:28:44 -0800 Subject: mmc: core: Fixup delayed work clock gating patch c31b50e (mmc: core: Use delayed work in clock gating framework, 2011-11-14) missed a few things during review: o A useless pr_info() o milliseconds was written as two words o The sysfs file had units in its output Fix all three problems. Signed-off-by: Stephen Boyd Cc: Sujit Reddy Thumma Signed-off-by: Chris Ball --- Documentation/mmc/mmc-dev-attrs.txt | 2 +- drivers/mmc/core/host.c | 6 +----- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/mmc/core/host.c') diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt index b0245565875a..22ae8441489f 100644 --- a/Documentation/mmc/mmc-dev-attrs.txt +++ b/Documentation/mmc/mmc-dev-attrs.txt @@ -71,6 +71,6 @@ SD/MMC/SDIO Clock Gating Attribute Read and write access is provided to following attribute. This attribute appears only if CONFIG_MMC_CLKGATE is enabled. - clkgate_delay Tune the clock gating delay with desired value in milli seconds. + clkgate_delay Tune the clock gating delay with desired value in milliseconds. echo > /sys/class/mmc_host/mmcX/clkgate_delay diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 817a76039743..30055f2b0d44 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -58,8 +58,7 @@ static ssize_t clkgate_delay_show(struct device *dev, struct device_attribute *attr, char *buf) { struct mmc_host *host = cls_dev_to_mmc_host(dev); - return snprintf(buf, PAGE_SIZE, "%lu millisecs\n", - host->clkgate_delay); + return snprintf(buf, PAGE_SIZE, "%lu\n", host->clkgate_delay); } static ssize_t clkgate_delay_store(struct device *dev, @@ -74,9 +73,6 @@ static ssize_t clkgate_delay_store(struct device *dev, spin_lock_irqsave(&host->clk_lock, flags); host->clkgate_delay = value; spin_unlock_irqrestore(&host->clk_lock, flags); - - pr_info("%s: clock gate delay set to %lu ms\n", - mmc_hostname(host), value); return count; } -- cgit v1.2.3