From 53256511010b2ee226ded9155728862d90ac2b1a Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 31 May 2014 20:49:34 +0200
Subject: b43: b43_op_config: drop check for core change
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There aren't devices with multiple 802.11 cores supported by b43.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 20 ++------------------
 1 file changed, 2 insertions(+), 18 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 32538ac5f7e4..a9e50ee125fa 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3798,17 +3798,13 @@ static void b43_set_retry_limits(struct b43_wldev *dev,
 static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
-	struct b43_wldev *dev;
-	struct b43_phy *phy;
+	struct b43_wldev *dev = wl->current_dev;
+	struct b43_phy *phy = &dev->phy;
 	struct ieee80211_conf *conf = &hw->conf;
 	int antenna;
 	int err = 0;
-	bool reload_bss = false;
 
 	mutex_lock(&wl->mutex);
-
-	dev = wl->current_dev;
-
 	b43_mac_suspend(dev);
 
 	/* Switch the band (if necessary). This might change the active core. */
@@ -3816,15 +3812,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (err)
 		goto out_unlock_mutex;
 
-	/* Need to reload all settings if the core changed */
-	if (dev != wl->current_dev) {
-		dev = wl->current_dev;
-		changed = ~0;
-		reload_bss = true;
-	}
-
-	phy = &dev->phy;
-
 	if (conf_is_ht(conf))
 		phy->is_40mhz =
 			(conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf));
@@ -3881,9 +3868,6 @@ out_mac_enable:
 out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
 
-	if (wl->vif && reload_bss)
-		b43_op_bss_info_changed(hw, wl->vif, &wl->vif->bss_conf, ~0);
-
 	return err;
 }
 
-- 
cgit v1.2.3


From 8c79e5ee033798bc1147ec29f222c2ace6e9e897 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 31 May 2014 20:49:35 +0200
Subject: b43: b43_op_config: use IEEE80211_CONF_CHANGE_CHANNEL
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is tiny optimization and grouping band/channel ops.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index a9e50ee125fa..59aa4fdb2aeb 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3807,16 +3807,23 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&wl->mutex);
 	b43_mac_suspend(dev);
 
-	/* Switch the band (if necessary). This might change the active core. */
-	err = b43_switch_band(dev, conf->chandef.chan);
-	if (err)
-		goto out_unlock_mutex;
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		if (conf_is_ht(conf))
+			phy->is_40mhz = conf_is_ht40_minus(conf) ||
+					conf_is_ht40_plus(conf);
+		else
+			phy->is_40mhz = false;
 
-	if (conf_is_ht(conf))
-		phy->is_40mhz =
-			(conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf));
-	else
-		phy->is_40mhz = false;
+		/* Switch the band (if necessary). */
+		err = b43_switch_band(dev, conf->chandef.chan);
+		if (err)
+			goto out_mac_enable;
+
+		/* Switch to the requested channel.
+		 * The firmware takes care of races with the TX handler.
+		 */
+		b43_switch_channel(dev, conf->chandef.chan->hw_value);
+	}
 
 	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
@@ -3825,11 +3832,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (!changed)
 		goto out_mac_enable;
 
-	/* Switch to the requested channel.
-	 * The firmware takes care of races with the TX handler. */
-	if (conf->chandef.chan->hw_value != phy->channel)
-		b43_switch_channel(dev, conf->chandef.chan->hw_value);
-
 	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
 
 	/* Adjust the desired TX power level. */
@@ -3865,7 +3867,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 
 out_mac_enable:
 	b43_mac_enable(dev);
-out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
 
 	return err;
-- 
cgit v1.2.3


From f9471e9973fd887b8af888b98860182b6c534ea2 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 31 May 2014 20:49:37 +0200
Subject: b43: b43_op_config: set channel info before switching band
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Band switching code needs to know what channel we switch to.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       | 3 ++-
 drivers/net/wireless/b43/phy_common.c | 1 -
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 59aa4fdb2aeb..5e4eed37e3ce 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3808,6 +3808,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	b43_mac_suspend(dev);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		phy->channel = conf->chandef.chan->hw_value;
 		if (conf_is_ht(conf))
 			phy->is_40mhz = conf_is_ht40_minus(conf) ||
 					conf_is_ht40_plus(conf);
@@ -3822,7 +3823,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 		/* Switch to the requested channel.
 		 * The firmware takes care of races with the TX handler.
 		 */
-		b43_switch_channel(dev, conf->chandef.chan->hw_value);
+		b43_switch_channel(dev, phy->channel);
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 3bfb795f6a6d..b465011c14ea 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -424,7 +424,6 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
 	if (err)
 		goto err_restore_cookie;
 
-	dev->phy.channel = new_channel;
 	/* Wait for the radio to tune to the channel and stabilize. */
 	msleep(8);
 
-- 
cgit v1.2.3


From ea42e71c79068daa8bfd04f5e3c4a19b5e62f7da Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 31 May 2014 20:49:38 +0200
Subject: b43: store current channel using struct cfg80211_chan_def
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       | 1 +
 drivers/net/wireless/b43/phy_common.c | 9 +++++++--
 drivers/net/wireless/b43/phy_common.h | 1 +
 3 files changed, 9 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5e4eed37e3ce..2b99ed31ab08 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3808,6 +3808,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	b43_mac_suspend(dev);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		phy->chandef = &conf->chandef;
 		phy->channel = conf->chandef.chan->hw_value;
 		if (conf_is_ht(conf))
 			phy->is_40mhz = conf_is_ht40_minus(conf) ||
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index b465011c14ea..9aa6c9c57393 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -94,8 +94,13 @@ int b43_phy_init(struct b43_wldev *dev)
 	const struct b43_phy_operations *ops = phy->ops;
 	int err;
 
-	if (!phy->channel)
-		phy->channel = ops->get_default_chan(dev);
+	/* During PHY init we need to use some channel. On the first init this
+	 * function is called *before* b43_op_config, so our pointer is NULL.
+	 */
+	if (!phy->chandef) {
+		phy->chandef = &dev->wl->hw->conf.chandef;
+		phy->channel = phy->chandef->chan->hw_value;
+	}
 
 	phy->ops->switch_analog(dev, true);
 	b43_software_rfkill(dev, false);
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 9a92df46ae84..56dfe7aa50a7 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -267,6 +267,7 @@ struct b43_phy {
 	unsigned long next_txpwr_check_time;
 
 	/* Current channel */
+	struct cfg80211_chan_def *chandef;
 	unsigned int channel;
 	u16 channel_freq;
 	enum nl80211_channel_type channel_type;
-- 
cgit v1.2.3


From bee6d4b272ba6e668f0c12d8bb66d76e1826f406 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 31 May 2014 20:49:40 +0200
Subject: b43: PHY: drop is_40mhz (get width info from chandef)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       |  5 ----
 drivers/net/wireless/b43/phy_common.c |  5 ++++
 drivers/net/wireless/b43/phy_common.h |  5 ++--
 drivers/net/wireless/b43/phy_n.c      | 53 +++++++++++++++++------------------
 4 files changed, 33 insertions(+), 35 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 2b99ed31ab08..4b662d0abdd2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3810,11 +3810,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 		phy->chandef = &conf->chandef;
 		phy->channel = conf->chandef.chan->hw_value;
-		if (conf_is_ht(conf))
-			phy->is_40mhz = conf_is_ht40_minus(conf) ||
-					conf_is_ht40_plus(conf);
-		else
-			phy->is_40mhz = false;
 
 		/* Switch the band (if necessary). */
 		err = b43_switch_band(dev, conf->chandef.chan);
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 9aa6c9c57393..e7e83835f725 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -553,6 +553,11 @@ bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type)
 		channel_type == NL80211_CHAN_HT40PLUS);
 }
 
+bool b43_is_40mhz(struct b43_wldev *dev)
+{
+	return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
 void b43_phy_force_clock(struct b43_wldev *dev, bool force)
 {
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 399082026b03..674422fd22e6 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -228,9 +228,6 @@ struct b43_phy {
 	bool supports_2ghz;
 	bool supports_5ghz;
 
-	/* HT info */
-	bool is_40mhz;
-
 	/* Is GMODE (2 GHz mode) bit enabled? */
 	bool gmode;
 
@@ -452,6 +449,8 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
 
 bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type);
 
+bool b43_is_40mhz(struct b43_wldev *dev);
+
 void b43_phy_force_clock(struct b43_wldev *dev, bool force);
 
 struct b43_c32 b43_cordic(int theta);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index dc62f024f776..dc1249381275 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -896,7 +896,7 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
 					offset | B2056_TX_MIXG_BOOST_TUNE,
 					mixg_boost);
 			} else {
-				bias = dev->phy.is_40mhz ? 0x40 : 0x20;
+				bias = b43_is_40mhz(dev) ? 0x40 : 0x20;
 				b43_radio_write(dev,
 					offset | B2056_TX_INTPAG_IMAIN_STAT,
 					bias);
@@ -1211,8 +1211,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 	u16 bw, len, rot, angle;
 	struct b43_c32 *samples;
 
-
-	bw = (dev->phy.is_40mhz) ? 40 : 20;
+	bw = b43_is_40mhz(dev) ? 40 : 20;
 	len = bw << 3;
 
 	if (test) {
@@ -1221,7 +1220,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 		else
 			bw = 80;
 
-		if (dev->phy.is_40mhz)
+		if (b43_is_40mhz(dev))
 			bw <<= 1;
 
 		len = bw << 1;
@@ -1264,7 +1263,7 @@ static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
 	}
 
 	/* TODO: add modify_bbmult argument */
-	if (!dev->phy.is_40mhz)
+	if (!b43_is_40mhz(dev))
 		tmp = 0x6464;
 	else
 		tmp = 0x4747;
@@ -2194,7 +2193,7 @@ static void b43_nphy_gain_ctl_workarounds_rev1_2(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
 	b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
 
-	if (!dev->phy.is_40mhz) {
+	if (!b43_is_40mhz(dev)) {
 		/* Set dwell lengths */
 		b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
 		b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
@@ -2208,7 +2207,7 @@ static void b43_nphy_gain_ctl_workarounds_rev1_2(struct b43_wldev *dev)
 	b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
 			~B43_NPHY_C2_CLIPWBTHRES_CLIP2, 21);
 
-	if (!dev->phy.is_40mhz) {
+	if (!b43_is_40mhz(dev)) {
 		b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
 			~B43_NPHY_C1_CGAINI_GAINBKOFF, 0x1);
 		b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
@@ -2223,12 +2222,12 @@ static void b43_nphy_gain_ctl_workarounds_rev1_2(struct b43_wldev *dev)
 
 	if (nphy->gain_boost) {
 		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ &&
-			dev->phy.is_40mhz)
+		    b43_is_40mhz(dev))
 			code = 4;
 		else
 			code = 5;
 	} else {
-		code = dev->phy.is_40mhz ? 6 : 7;
+		code = b43_is_40mhz(dev) ? 6 : 7;
 	}
 
 	/* Set HPVGA2 index */
@@ -2300,7 +2299,7 @@ static void b43_nphy_gain_ctl_workarounds(struct b43_wldev *dev)
 static u16 b43_nphy_read_lpf_ctl(struct b43_wldev *dev, u16 offset)
 {
 	if (!offset)
-		offset = (dev->phy.is_40mhz) ? 0x159 : 0x154;
+		offset = b43_is_40mhz(dev) ? 0x159 : 0x154;
 	return b43_ntab_read(dev, B43_NTAB16(7, offset)) & 0x7;
 }
 
@@ -2373,13 +2372,13 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
 	lpf_40 = b43_nphy_read_lpf_ctl(dev, 0x159);
 	lpf_11b = b43_nphy_read_lpf_ctl(dev, 0x152);
 	if (b43_nphy_ipa(dev)) {
-		if ((phy->radio_rev == 5 && phy->is_40mhz) ||
+		if ((phy->radio_rev == 5 && b43_is_40mhz(dev)) ||
 		    phy->radio_rev == 7 || phy->radio_rev == 8) {
 			bcap_val = b43_radio_read(dev, 0x16b);
 			scap_val = b43_radio_read(dev, 0x16a);
 			scap_val_11b = scap_val;
 			bcap_val_11b = bcap_val;
-			if (phy->radio_rev == 5 && phy->is_40mhz) {
+			if (phy->radio_rev == 5 && b43_is_40mhz(dev)) {
 				scap_val_11n_20 = scap_val;
 				bcap_val_11n_20 = bcap_val;
 				scap_val_11n_40 = bcap_val_11n_40 = 0xc;
@@ -2521,7 +2520,7 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
 					}
 				}
 			} else if (phy->radio_rev == 7 || phy->radio_rev == 8) {
-				if (!phy->is_40mhz) {
+				if (!b43_is_40mhz(dev)) {
 					b43_radio_write(dev, 0x5F, 0x14);
 					b43_radio_write(dev, 0xE8, 0x12);
 				} else {
@@ -2594,7 +2593,7 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
 	b43_ntab_write(dev, B43_NTAB16(7, 0x123), 0x77);
 	b43_ntab_write(dev, B43_NTAB16(7, 0x12A), 0x77);
 
-	if (!phy->is_40mhz) {
+	if (!b43_is_40mhz(dev)) {
 		b43_ntab_write(dev, B43_NTAB32(16, 0x03), 0x18D);
 		b43_ntab_write(dev, B43_NTAB32(16, 0x7F), 0x18D);
 	} else {
@@ -2693,7 +2692,7 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
 
 	b43_phy_maskset(dev, B43_NPHY_SGILTRNOFFSET, 0xF0FF, 0x0700);
 
-	if (!dev->phy.is_40mhz) {
+	if (!b43_is_40mhz(dev)) {
 		b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
 		b43_ntab_write(dev, B43_NTAB32(16, 127), 0x18D);
 	} else {
@@ -3116,7 +3115,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
 			b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
 				~B43_NPHY_BPHY_CTL3_SCALE, 0x5A);
 
-		if (dev->phy.rev < 2 && dev->phy.is_40mhz)
+		if (dev->phy.rev < 2 && b43_is_40mhz(dev))
 			b43_hf_write(dev, b43_hf_read(dev) | B43_HF_TSSIRPSMW);
 	} else {
 		b43_ntab_write_bulk(dev, B43_NTAB16(26, 64), 84,
@@ -3170,7 +3169,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
 		else if (dev->phy.rev < 2)
 			b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, ~0xFF, 0x40);
 
-		if (dev->phy.rev < 2 && dev->phy.is_40mhz)
+		if (dev->phy.rev < 2 && b43_is_40mhz(dev))
 			b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_TSSIRPSMW);
 
 		if (b43_nphy_ipa(dev)) {
@@ -3442,21 +3441,21 @@ static void b43_nphy_tx_prepare_adjusted_power_table(struct b43_wldev *dev)
 		delta = 0;
 		switch (stf_mode) {
 		case 0:
-			if (dev->phy.is_40mhz && dev->phy.rev >= 5) {
+			if (b43_is_40mhz(dev) && dev->phy.rev >= 5) {
 				idx = 68;
 			} else {
 				delta = 1;
-				idx = dev->phy.is_40mhz ? 52 : 4;
+				idx = b43_is_40mhz(dev) ? 52 : 4;
 			}
 			break;
 		case 1:
-			idx = dev->phy.is_40mhz ? 76 : 28;
+			idx = b43_is_40mhz(dev) ? 76 : 28;
 			break;
 		case 2:
-			idx = dev->phy.is_40mhz ? 84 : 36;
+			idx = b43_is_40mhz(dev) ? 84 : 36;
 			break;
 		case 3:
-			idx = dev->phy.is_40mhz ? 92 : 44;
+			idx = b43_is_40mhz(dev) ? 92 : 44;
 			break;
 		}
 
@@ -3996,7 +3995,7 @@ static void b43_nphy_spur_workaround(struct b43_wldev *dev)
 
 	if (nphy->gband_spurwar_en) {
 		/* TODO: N PHY Adjust Analog Pfbw (7) */
-		if (channel == 11 && dev->phy.is_40mhz)
+		if (channel == 11 && b43_is_40mhz(dev))
 			; /* TODO: N PHY Adjust Min Noise Var(2, tone, noise)*/
 		else
 			; /* TODO: N PHY Adjust Min Noise Var(0, NULL, NULL)*/
@@ -4290,7 +4289,7 @@ static void b43_nphy_int_pa_set_tx_dig_filters(struct b43_wldev *dev)
 			b43_phy_write(dev, B43_PHY_N(offset[i] + j),
 					tbl_tx_filter_coef_rev4[i][j]);
 
-	if (dev->phy.is_40mhz) {
+	if (b43_is_40mhz(dev)) {
 		for (j = 0; j < 15; j++)
 			b43_phy_write(dev, B43_PHY_N(offset[0] + j),
 					tbl_tx_filter_coef_rev4[3][j]);
@@ -4626,7 +4625,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		(dev->phy.rev == 5 && nphy->ipa2g_on &&
 		b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ);
 	if (phy6or5x) {
-		if (dev->phy.is_40mhz) {
+		if (b43_is_40mhz(dev)) {
 			b43_ntab_write_bulk(dev, B43_NTAB16(15, 0), 18,
 					tbl_tx_iqlo_cal_loft_ladder_40);
 			b43_ntab_write_bulk(dev, B43_NTAB16(15, 32), 18,
@@ -4641,13 +4640,13 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 
 	b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8AA9);
 
-	if (!dev->phy.is_40mhz)
+	if (!b43_is_40mhz(dev))
 		freq = 2500;
 	else
 		freq = 5000;
 
 	if (nphy->mphase_cal_phase_id > 2)
-		b43_nphy_run_samples(dev, (dev->phy.is_40mhz ? 40 : 20) * 8,
+		b43_nphy_run_samples(dev, (b43_is_40mhz(dev) ? 40 : 20) * 8,
 					0xFFFF, 0, true, false);
 	else
 		error = b43_nphy_tx_tone(dev, freq, 250, true, false);
-- 
cgit v1.2.3


From bba4d409cbd322a0b78768a6dda013baed2b5a36 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 20 Jun 2014 17:22:00 +0200
Subject: b43: remove leftover code from old devices support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Old devices (A-PHY or B-PHY) are supposed to be supported by b43legacy.
We keep phy_a.c as it's needed for G-PHY which shares some design.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       | 9 ---------
 drivers/net/wireless/b43/phy_a.h      | 4 ----
 drivers/net/wireless/b43/phy_common.c | 3 ---
 3 files changed, 16 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4b662d0abdd2..4164afa843e9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4306,15 +4306,6 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 	phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
 	phy_rev = (tmp & B43_PHYVER_VERSION);
 	switch (phy_type) {
-	case B43_PHYTYPE_A:
-		if (phy_rev >= 4)
-			unsupported = 1;
-		break;
-	case B43_PHYTYPE_B:
-		if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
-		    && phy_rev != 7)
-			unsupported = 1;
-		break;
 	case B43_PHYTYPE_G:
 		if (phy_rev > 9)
 			unsupported = 1;
diff --git a/drivers/net/wireless/b43/phy_a.h b/drivers/net/wireless/b43/phy_a.h
index 5cfaab7b16ee..f7d0d929a374 100644
--- a/drivers/net/wireless/b43/phy_a.h
+++ b/drivers/net/wireless/b43/phy_a.h
@@ -123,8 +123,4 @@ struct b43_phy_a {
  */
 void b43_phy_inita(struct b43_wldev *dev);
 
-
-struct b43_phy_operations;
-extern const struct b43_phy_operations b43_phyops_a;
-
 #endif /* LINUX_B43_PHY_A_H_ */
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 2d05b5987168..ce486eeaf8e1 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -45,9 +45,6 @@ int b43_phy_allocate(struct b43_wldev *dev)
 	phy->ops = NULL;
 
 	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		phy->ops = &b43_phyops_a;
-		break;
 	case B43_PHYTYPE_G:
 		phy->ops = &b43_phyops_g;
 		break;
-- 
cgit v1.2.3


From 418378fed0506b5ec0b43c03bc11929ec1f88073 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 20 Jun 2014 17:22:01 +0200
Subject: b43: add config for (en|dis)abling G-PHY support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This allows new devices users to save some space.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/Kconfig      | 9 +++++++++
 drivers/net/wireless/b43/Makefile     | 6 +-----
 drivers/net/wireless/b43/main.c       | 2 ++
 drivers/net/wireless/b43/phy_common.c | 2 ++
 4 files changed, 14 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index e3f67b8d3f80..037a4e304d14 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -122,6 +122,15 @@ config B43_PIO
 	select SSB_BLOCKIO
 	default y
 
+config B43_PHY_G
+	bool "Support for G-PHY (802.11g) devices"
+	depends on B43 && B43_SSB
+	default y
+	---help---
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4306, BCM4311, BCM4318
+	  SoC: BCM4712, BCM5352E
+
 config B43_PHY_N
 	bool "Support for 802.11n (N-PHY) devices"
 	depends on B43
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 098fe9ee7096..6e00b8804ada 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -1,13 +1,11 @@
 b43-y				+= main.o
 b43-y				+= bus.o
-b43-y				+= tables.o
+b43-$(CONFIG_B43_PHY_G)		+= phy_a.o phy_g.o tables.o lo.o wa.o
 b43-$(CONFIG_B43_PHY_N)		+= tables_nphy.o
 b43-$(CONFIG_B43_PHY_N)		+= radio_2055.o
 b43-$(CONFIG_B43_PHY_N)		+= radio_2056.o
 b43-$(CONFIG_B43_PHY_N)		+= radio_2057.o
 b43-y				+= phy_common.o
-b43-y				+= phy_g.o
-b43-y				+= phy_a.o
 b43-$(CONFIG_B43_PHY_N)		+= phy_n.o
 b43-$(CONFIG_B43_PHY_LP)	+= phy_lp.o
 b43-$(CONFIG_B43_PHY_LP)	+= tables_lpphy.o
@@ -17,8 +15,6 @@ b43-$(CONFIG_B43_PHY_HT)	+= radio_2059.o
 b43-$(CONFIG_B43_PHY_LCN)	+= phy_lcn.o tables_phy_lcn.o
 b43-y				+= sysfs.o
 b43-y				+= xmit.o
-b43-y				+= lo.o
-b43-y				+= wa.o
 b43-y				+= dma.o
 b43-y				+= pio.o
 b43-y				+= rfkill.o
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4164afa843e9..9cf07bb7adf8 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4306,10 +4306,12 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 	phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
 	phy_rev = (tmp & B43_PHYVER_VERSION);
 	switch (phy_type) {
+#ifdef CONFIG_B43_PHY_G
 	case B43_PHYTYPE_G:
 		if (phy_rev > 9)
 			unsupported = 1;
 		break;
+#endif
 #ifdef CONFIG_B43_PHY_N
 	case B43_PHYTYPE_N:
 		if (phy_rev > 9)
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index ce486eeaf8e1..3cbef21b4726 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -46,7 +46,9 @@ int b43_phy_allocate(struct b43_wldev *dev)
 
 	switch (phy->type) {
 	case B43_PHYTYPE_G:
+#ifdef CONFIG_B43_PHY_G
 		phy->ops = &b43_phyops_g;
+#endif
 		break;
 	case B43_PHYTYPE_N:
 #ifdef CONFIG_B43_PHY_N
-- 
cgit v1.2.3


From a60f99f75dd35179094a4e9ed4ae8ce0c7ece908 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Tue, 24 Jun 2014 10:50:41 +0200
Subject: b43: update list and code making a selection of firmware files
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Clean ucode selection, fix choice of firmware for LCN, drop some goto-s,
add new devices.
Tested on 14e4:4312, 14e4:4315, 14e4:4328, 14e4:432b, 14e4:4353.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 224 ++++++++++++++++++++++------------------
 1 file changed, 125 insertions(+), 99 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 9cf07bb7adf8..aae3af2a7a9f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2201,52 +2201,78 @@ err_format:
 	return -EPROTO;
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/Init/Firmware */
 static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 {
 	struct b43_wldev *dev = ctx->dev;
 	struct b43_firmware *fw = &ctx->dev->fw;
+	struct b43_phy *phy = &dev->phy;
 	const u8 rev = ctx->dev->dev->core_rev;
 	const char *filename;
-	u32 tmshigh;
 	int err;
 
-	/* Files for HT and LCN were found by trying one by one */
-
 	/* Get microcode */
-	if ((rev >= 5) && (rev <= 10)) {
-		filename = "ucode5";
-	} else if ((rev >= 11) && (rev <= 12)) {
-		filename = "ucode11";
-	} else if (rev == 13) {
-		filename = "ucode13";
-	} else if (rev == 14) {
-		filename = "ucode14";
-	} else if (rev == 15) {
+	filename = NULL;
+	switch (rev) {
+	case 42:
+		if (phy->type == B43_PHYTYPE_AC)
+			filename = "ucode42";
+		break;
+	case 33:
+		if (phy->type == B43_PHYTYPE_LCN40)
+			filename = "ucode33_lcn40";
+		break;
+	case 30:
+		if (phy->type == B43_PHYTYPE_N)
+			filename = "ucode30_mimo";
+		break;
+	case 29:
+		if (phy->type == B43_PHYTYPE_HT)
+			filename = "ucode29_mimo";
+		break;
+	case 26:
+		if (phy->type == B43_PHYTYPE_HT)
+			filename = "ucode26_mimo";
+		break;
+	case 28:
+	case 25:
+		if (phy->type == B43_PHYTYPE_N)
+			filename = "ucode25_mimo";
+		else if (phy->type == B43_PHYTYPE_LCN)
+			filename = "ucode25_lcn";
+		break;
+	case 24:
+		if (phy->type == B43_PHYTYPE_LCN)
+			filename = "ucode24_lcn";
+		break;
+	case 23:
+		if (phy->type == B43_PHYTYPE_N)
+			filename = "ucode16_mimo";
+		break;
+	case 16 ... 19:
+		if (phy->type == B43_PHYTYPE_N)
+			filename = "ucode16_mimo";
+		else if (phy->type == B43_PHYTYPE_LP)
+			filename = "ucode16_lp";
+		break;
+	case 15:
 		filename = "ucode15";
-	} else {
-		switch (dev->phy.type) {
-		case B43_PHYTYPE_N:
-			if (rev >= 16)
-				filename = "ucode16_mimo";
-			else
-				goto err_no_ucode;
-			break;
-		case B43_PHYTYPE_HT:
-			if (rev == 29)
-				filename = "ucode29_mimo";
-			else
-				goto err_no_ucode;
-			break;
-		case B43_PHYTYPE_LCN:
-			if (rev == 24)
-				filename = "ucode24_mimo";
-			else
-				goto err_no_ucode;
-			break;
-		default:
-			goto err_no_ucode;
-		}
+		break;
+	case 14:
+		filename = "ucode14";
+		break;
+	case 13:
+		filename = "ucode13";
+		break;
+	case 11 ... 12:
+		filename = "ucode11";
+		break;
+	case 5 ... 10:
+		filename = "ucode5";
+		break;
 	}
+	if (!filename)
+		goto err_no_ucode;
 	err = b43_do_request_fw(ctx, filename, &fw->ucode, true);
 	if (err)
 		goto err_load;
@@ -2268,117 +2294,117 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 		goto err_load;
 
 	/* Get initvals */
+	filename = NULL;
 	switch (dev->phy.type) {
-	case B43_PHYTYPE_A:
-		if ((rev >= 5) && (rev <= 10)) {
-			tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
-			if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
-				filename = "a0g1initvals5";
-			else
-				filename = "a0g0initvals5";
-		} else
-			goto err_no_initvals;
-		break;
 	case B43_PHYTYPE_G:
-		if ((rev >= 5) && (rev <= 10))
-			filename = "b0g0initvals5";
-		else if (rev >= 13)
+		if (rev == 13)
 			filename = "b0g0initvals13";
-		else
-			goto err_no_initvals;
+		else if (rev >= 5 && rev <= 10)
+			filename = "b0g0initvals5";
 		break;
 	case B43_PHYTYPE_N:
-		if (rev >= 16)
+		if (rev == 30)
+			filename = "n16initvals30";
+		else if (rev == 28 || rev == 25)
+			filename = "n0initvals25";
+		else if (rev == 24)
+			filename = "n0initvals24";
+		else if (rev == 23)
+			filename = "n0initvals16"; /* What about n0initvals22? */
+		else if (rev >= 16 && rev <= 18)
 			filename = "n0initvals16";
-		else if ((rev >= 11) && (rev <= 12))
+		else if (rev >= 11 && rev <= 12)
 			filename = "n0initvals11";
-		else
-			goto err_no_initvals;
 		break;
 	case B43_PHYTYPE_LP:
-		if (rev == 13)
-			filename = "lp0initvals13";
+		if (rev >= 16 && rev <= 18)
+			filename = "lp0initvals16";
+		else if (rev == 15)
+			filename = "lp0initvals15";
 		else if (rev == 14)
 			filename = "lp0initvals14";
-		else if (rev >= 15)
-			filename = "lp0initvals15";
-		else
-			goto err_no_initvals;
+		else if (rev == 13)
+			filename = "lp0initvals13";
 		break;
 	case B43_PHYTYPE_HT:
 		if (rev == 29)
 			filename = "ht0initvals29";
-		else
-			goto err_no_initvals;
+		else if (rev == 26)
+			filename = "ht0initvals26";
 		break;
 	case B43_PHYTYPE_LCN:
 		if (rev == 24)
 			filename = "lcn0initvals24";
-		else
-			goto err_no_initvals;
 		break;
-	default:
-		goto err_no_initvals;
+	case B43_PHYTYPE_LCN40:
+		if (rev == 33)
+			filename = "lcn400initvals33";
+		break;
+	case B43_PHYTYPE_AC:
+		if (rev == 42)
+			filename = "ac1initvals42";
+		break;
 	}
+	if (!filename)
+		goto err_no_initvals;
 	err = b43_do_request_fw(ctx, filename, &fw->initvals, false);
 	if (err)
 		goto err_load;
 
 	/* Get bandswitch initvals */
+	filename = NULL;
 	switch (dev->phy.type) {
-	case B43_PHYTYPE_A:
-		if ((rev >= 5) && (rev <= 10)) {
-			tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
-			if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
-				filename = "a0g1bsinitvals5";
-			else
-				filename = "a0g0bsinitvals5";
-		} else if (rev >= 11)
-			filename = NULL;
-		else
-			goto err_no_initvals;
-		break;
 	case B43_PHYTYPE_G:
-		if ((rev >= 5) && (rev <= 10))
+		if (rev == 13)
+			filename = "b0g0bsinitvals13";
+		else if (rev >= 5 && rev <= 10)
 			filename = "b0g0bsinitvals5";
-		else if (rev >= 11)
-			filename = NULL;
-		else
-			goto err_no_initvals;
 		break;
 	case B43_PHYTYPE_N:
-		if (rev >= 16)
+		if (rev == 30)
+			filename = "n16bsinitvals30";
+		else if (rev == 28 || rev == 25)
+			filename = "n0bsinitvals25";
+		else if (rev == 24)
+			filename = "n0bsinitvals24";
+		else if (rev == 23)
+			filename = "n0bsinitvals16"; /* What about n0bsinitvals22? */
+		else if (rev >= 16 && rev <= 18)
 			filename = "n0bsinitvals16";
-		else if ((rev >= 11) && (rev <= 12))
+		else if (rev >= 11 && rev <= 12)
 			filename = "n0bsinitvals11";
-		else
-			goto err_no_initvals;
 		break;
 	case B43_PHYTYPE_LP:
-		if (rev == 13)
-			filename = "lp0bsinitvals13";
+		if (rev >= 16 && rev <= 18)
+			filename = "lp0bsinitvals16";
+		else if (rev == 15)
+			filename = "lp0bsinitvals15";
 		else if (rev == 14)
 			filename = "lp0bsinitvals14";
-		else if (rev >= 15)
-			filename = "lp0bsinitvals15";
-		else
-			goto err_no_initvals;
+		else if (rev == 13)
+			filename = "lp0bsinitvals13";
 		break;
 	case B43_PHYTYPE_HT:
 		if (rev == 29)
 			filename = "ht0bsinitvals29";
-		else
-			goto err_no_initvals;
+		else if (rev == 26)
+			filename = "ht0bsinitvals26";
 		break;
 	case B43_PHYTYPE_LCN:
 		if (rev == 24)
 			filename = "lcn0bsinitvals24";
-		else
-			goto err_no_initvals;
 		break;
-	default:
-		goto err_no_initvals;
+	case B43_PHYTYPE_LCN40:
+		if (rev == 33)
+			filename = "lcn400bsinitvals33";
+		break;
+	case B43_PHYTYPE_AC:
+		if (rev == 42)
+			filename = "ac1bsinitvals42";
+		break;
 	}
+	if (!filename)
+		goto err_no_initvals;
 	err = b43_do_request_fw(ctx, filename, &fw->initvals_band, false);
 	if (err)
 		goto err_load;
-- 
cgit v1.2.3


From b49c3caf5ef1476895f92ea5fac0b6bd48854628 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 29 Jun 2014 21:46:45 +0200
Subject: b43: treat LCNXN-PHY as extra N-PHY devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

LCNXN is simply a continuation of N, e.g. code handling LCNXN revs 0 and
1 is mostly the same as for N-PHY revs 7+.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index aae3af2a7a9f..3740b76162f9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4331,6 +4331,13 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 	analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
 	phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
 	phy_rev = (tmp & B43_PHYVER_VERSION);
+
+	/* LCNXN is continuation of N which run out of revisions */
+	if (phy_type == B43_PHYTYPE_LCNXN) {
+		phy_type = B43_PHYTYPE_N;
+		phy_rev += 16;
+	}
+
 	switch (phy_type) {
 #ifdef CONFIG_B43_PHY_G
 	case B43_PHYTYPE_G:
-- 
cgit v1.2.3


From 15be8e89cdd999124a2307ffd6dacb895c3b802e Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Tue, 1 Jul 2014 16:33:57 +0200
Subject: b43: add more bcma cores
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This adds some cores with 0x2057 radio which will be supported soon as
well as core 40 that I missed in the earlier firmware patch.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 3740b76162f9..ca4a19077d7e 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -122,7 +122,11 @@ static const struct bcma_device_id b43_bcma_tbl[] = {
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1C, BCMA_ANY_CLASS),
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1E, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x28, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x2A, BCMA_ANY_CLASS),
 	BCMA_CORETABLE_END
 };
 MODULE_DEVICE_TABLE(bcma, b43_bcma_tbl);
@@ -2218,6 +2222,10 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 		if (phy->type == B43_PHYTYPE_AC)
 			filename = "ucode42";
 		break;
+	case 40:
+		if (phy->type == B43_PHYTYPE_AC)
+			filename = "ucode40";
+		break;
 	case 33:
 		if (phy->type == B43_PHYTYPE_LCN40)
 			filename = "ucode33_lcn40";
@@ -2343,6 +2351,8 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 	case B43_PHYTYPE_AC:
 		if (rev == 42)
 			filename = "ac1initvals42";
+		else if (rev == 40)
+			filename = "ac0initvals40";
 		break;
 	}
 	if (!filename)
@@ -2401,6 +2411,8 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 	case B43_PHYTYPE_AC:
 		if (rev == 42)
 			filename = "ac1bsinitvals42";
+		else if (rev == 40)
+			filename = "ac0bsinitvals40";
 		break;
 	}
 	if (!filename)
-- 
cgit v1.2.3


From fe5e499f427dadbeeb079e0a796702f4a3da78a0 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 4 Jul 2014 09:21:56 +0200
Subject: b43: fix reading info about radio for new devices (cores 40 & 42)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This changes
b43-phy0: Found Radio: Manuf 0x17F, Version 0x7769, Revision 4
to the
b43-phy0: Found Radio: Manuf 0x17F, Version 0x2069, Revision 4
which matches what closed source driver reports:
$ wl revinfo
radiorev 0x42069000

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index ca4a19077d7e..b2bc593a6513 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4329,6 +4329,7 @@ static char *b43_phy_name(struct b43_wldev *dev, u8 phy_type)
 static int b43_phy_versioning(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
+	const u8 core_rev = dev->dev->core_rev;
 	u32 tmp;
 	u8 analog_type;
 	u8 phy_type;
@@ -4394,7 +4395,15 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 		analog_type, phy_type, b43_phy_name(dev, phy_type), phy_rev);
 
 	/* Get RADIO versioning */
-	if (dev->dev->core_rev >= 24) {
+	if (core_rev == 40 || core_rev == 42) {
+		radio_manuf = 0x17F;
+
+		b43_write16(dev, B43_MMIO_RADIO24_CONTROL, 0);
+		radio_rev = b43_read16(dev, B43_MMIO_RADIO24_DATA);
+
+		b43_write16(dev, B43_MMIO_RADIO24_CONTROL, 1);
+		radio_ver = b43_read16(dev, B43_MMIO_RADIO24_DATA);
+	} else if (core_rev >= 24) {
 		u16 radio24[3];
 
 		for (tmp = 0; tmp < 3; tmp++) {
-- 
cgit v1.2.3


From 88d825bffd3d537350d0000b7ef15cb00532d417 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 2 Jul 2014 19:07:43 +0200
Subject: b43: always print info about radio (manuf, id, revision)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Type of radio has a major meaning for the driver. There is quite some
code that does initialization/calibration depending on the radio rev.
Knowing radio params is quite important to provide help to users, so
print it even with debugging disabled.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 15aaeb132a32..83b2d568bcae 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4478,13 +4478,13 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 		B43_WARN_ON(1);
 	}
 	if (unsupported) {
-		b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
-		       "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
+		b43err(dev->wl,
+		       "FOUND UNSUPPORTED RADIO (Manuf 0x%X, ID 0x%X, Revision %u)\n",
 		       radio_manuf, radio_ver, radio_rev);
 		return -EOPNOTSUPP;
 	}
-	b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
-	       radio_manuf, radio_ver, radio_rev);
+	b43info(dev->wl, "Found Radio: Manuf 0x%X, ID 0x%X, Revision %u\n",
+		radio_manuf, radio_ver, radio_rev);
 
 	phy->radio_manuf = radio_manuf;
 	phy->radio_ver = radio_ver;
-- 
cgit v1.2.3


From 40c68f20e63c9cd589ebfcf672ef912452967caf Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Tue, 8 Jul 2014 15:11:07 +0200
Subject: b43; N-PHY: write most of the missing code for revs 7+
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       |   2 +-
 drivers/net/wireless/b43/phy_n.c      | 306 +++++++++++++++++++++++++++++-----
 drivers/net/wireless/b43/phy_n.h      |  11 ++
 drivers/net/wireless/b43/radio_2057.h |  10 ++
 4 files changed, 290 insertions(+), 39 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 83b2d568bcae..8dd69a3ae7ac 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4360,7 +4360,7 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 #endif
 #ifdef CONFIG_B43_PHY_N
 	case B43_PHYTYPE_N:
-		if (phy_rev > 9)
+		if (phy_rev >= 19)
 			unsupported = 1;
 		break;
 #endif
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 4bb4d0a3134b..44349f5b99c6 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -36,6 +36,7 @@
 #include "main.h"
 
 struct nphy_txgains {
+	u16 tx_lpf[2];
 	u16 txgm[2];
 	u16 pga[2];
 	u16 pad[2];
@@ -43,6 +44,7 @@ struct nphy_txgains {
 };
 
 struct nphy_iqcal_params {
+	u16 tx_lpf;
 	u16 txgm;
 	u16 pga;
 	u16 pad;
@@ -69,6 +71,14 @@ enum b43_nphy_rf_sequence {
 	B43_RFSEQ_UPDATE_GAINU,
 };
 
+enum n_rf_ctl_over_cmd {
+	N_RF_CTL_OVER_CMD_RXRF_PU = 0,
+	N_RF_CTL_OVER_CMD_RX_PU = 1,
+	N_RF_CTL_OVER_CMD_TX_PU = 2,
+	N_RF_CTL_OVER_CMD_RX_GAIN = 3,
+	N_RF_CTL_OVER_CMD_TX_GAIN = 4,
+};
+
 enum n_intc_override {
 	N_INTC_OVERRIDE_OFF = 0,
 	N_INTC_OVERRIDE_TRSW = 1,
@@ -194,6 +204,50 @@ static void b43_nphy_rf_ctl_override_rev7(struct b43_wldev *dev, u16 field,
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RFCtrlOverideOneToMany */
+static void b43_nphy_rf_ctl_override_one_to_many(struct b43_wldev *dev,
+						 enum n_rf_ctl_over_cmd cmd,
+						 u16 value, u8 core, bool off)
+{
+	struct b43_phy *phy = &dev->phy;
+	u16 tmp;
+
+	B43_WARN_ON(phy->rev < 7);
+
+	switch (cmd) {
+	case N_RF_CTL_OVER_CMD_RXRF_PU:
+		b43_nphy_rf_ctl_override_rev7(dev, 0x20, value, core, off, 1);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x10, value, core, off, 1);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x08, value, core, off, 1);
+		break;
+	case N_RF_CTL_OVER_CMD_RX_PU:
+		b43_nphy_rf_ctl_override_rev7(dev, 0x4, value, core, off, 1);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x2, value, core, off, 1);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x1, value, core, off, 1);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x2, value, core, off, 2);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x0800, value, core, off, 1);
+		break;
+	case N_RF_CTL_OVER_CMD_TX_PU:
+		b43_nphy_rf_ctl_override_rev7(dev, 0x4, value, core, off, 0);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x2, value, core, off, 1);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x1, value, core, off, 2);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x0800, value, core, off, 1);
+		break;
+	case N_RF_CTL_OVER_CMD_RX_GAIN:
+		tmp = value & 0xFF;
+		b43_nphy_rf_ctl_override_rev7(dev, 0x0800, tmp, core, off, 0);
+		tmp = value >> 8;
+		b43_nphy_rf_ctl_override_rev7(dev, 0x6000, tmp, core, off, 0);
+		break;
+	case N_RF_CTL_OVER_CMD_TX_GAIN:
+		tmp = value & 0x7FFF;
+		b43_nphy_rf_ctl_override_rev7(dev, 0x1000, tmp, core, off, 0);
+		tmp = value >> 14;
+		b43_nphy_rf_ctl_override_rev7(dev, 0x4000, tmp, core, off, 0);
+		break;
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RFCtrlOverride */
 static void b43_nphy_rf_ctl_override(struct b43_wldev *dev, u16 field,
 				     u16 value, u8 core, bool off)
@@ -520,6 +574,14 @@ static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/PHY/N/Read_Lpf_Bw_Ctl */
+static u16 b43_nphy_read_lpf_ctl(struct b43_wldev *dev, u16 offset)
+{
+	if (!offset)
+		offset = b43_is_40mhz(dev) ? 0x159 : 0x154;
+	return b43_ntab_read(dev, B43_NTAB16(7, offset)) & 0x7;
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/AdjustLnaGainTbl */
 static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 {
@@ -1410,7 +1472,23 @@ static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
 	b43_nphy_stay_in_carrier_search(dev, true);
 
 	if (phy->rev >= 7) {
-		/* TODO */
+		bool lpf_bw3, lpf_bw4;
+
+		lpf_bw3 = b43_phy_read(dev, B43_NPHY_REV7_RF_CTL_OVER3) & 0x80;
+		lpf_bw4 = b43_phy_read(dev, B43_NPHY_REV7_RF_CTL_OVER3) & 0x80;
+
+		if (lpf_bw3 || lpf_bw4) {
+			/* TODO */
+		} else {
+			u16 value = b43_nphy_read_lpf_ctl(dev, 0);
+			if (phy->rev >= 19)
+				b43_nphy_rf_ctl_override_rev19(dev, 0x80, value,
+							       0, false, 1);
+			else
+				b43_nphy_rf_ctl_override_rev7(dev, 0x80, value,
+							      0, false, 1);
+			nphy->lpf_bw_overrode_for_sample_play = true;
+		}
 	}
 
 	if ((nphy->bb_mult_save & 0x80000000) == 0) {
@@ -1857,12 +1935,14 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 		B43_NPHY_AFECTL_OVER1, B43_NPHY_AFECTL_OVER,
 		B43_NPHY_AFECTL_C1, B43_NPHY_AFECTL_C2,
 		B43_NPHY_TXF_40CO_B1S1, B43_NPHY_RFCTL_OVER,
-		0x342, 0x343, 0x346, 0x347,
+		B43_NPHY_REV7_RF_CTL_OVER3, B43_NPHY_REV7_RF_CTL_OVER4,
+		B43_NPHY_REV7_RF_CTL_OVER5, B43_NPHY_REV7_RF_CTL_OVER6,
 		0x2ff,
 		B43_NPHY_TXF_40CO_B1S0, B43_NPHY_TXF_40CO_B32S1,
 		B43_NPHY_RFCTL_CMD,
 		B43_NPHY_RFCTL_LUT_TRSW_UP1, B43_NPHY_RFCTL_LUT_TRSW_UP2,
-		0x340, 0x341, 0x344, 0x345,
+		B43_NPHY_REV7_RF_CTL_MISC_REG3, B43_NPHY_REV7_RF_CTL_MISC_REG4,
+		B43_NPHY_REV7_RF_CTL_MISC_REG5, B43_NPHY_REV7_RF_CTL_MISC_REG6,
 		B43_NPHY_RFCTL_RSSIO1, B43_NPHY_RFCTL_RSSIO2
 	};
 	u16 *regs_to_store;
@@ -1909,9 +1989,24 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 	b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 1, 7);
 
 	if (dev->phy.rev >= 7) {
-		/* TODO */
+		b43_nphy_rf_ctl_override_one_to_many(dev,
+						     N_RF_CTL_OVER_CMD_RXRF_PU,
+						     0, 0, false);
+		b43_nphy_rf_ctl_override_one_to_many(dev,
+						     N_RF_CTL_OVER_CMD_RX_PU,
+						     1, 0, false);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x80, 1, 0, false, 0);
+		b43_nphy_rf_ctl_override_rev7(dev, 0x80, 1, 0, false, 0);
 		if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+			b43_nphy_rf_ctl_override_rev7(dev, 0x20, 0, 0, false,
+						      0);
+			b43_nphy_rf_ctl_override_rev7(dev, 0x10, 1, 0, false,
+						      0);
 		} else {
+			b43_nphy_rf_ctl_override_rev7(dev, 0x10, 0, 0, false,
+						      0);
+			b43_nphy_rf_ctl_override_rev7(dev, 0x20, 1, 0, false,
+						      0);
 		}
 	} else {
 		b43_nphy_rf_ctl_override(dev, 0x1, 0, 0, false);
@@ -1940,7 +2035,10 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 		/* Grab RSSI results for every possible VCM */
 		for (vcm = 0; vcm < 8; vcm++) {
 			if (dev->phy.rev >= 7)
-				;
+				b43_radio_maskset(dev,
+						  core ? R2057_NB_MASTER_CORE1 :
+							 R2057_NB_MASTER_CORE0,
+						  ~R2057_VCM_MASK, vcm);
 			else
 				b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC,
 						  0xE3, vcm << 2);
@@ -1971,7 +2069,10 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 
 		/* Select the best VCM */
 		if (dev->phy.rev >= 7)
-			;
+			b43_radio_maskset(dev,
+					  core ? R2057_NB_MASTER_CORE1 :
+						 R2057_NB_MASTER_CORE0,
+					  ~R2057_VCM_MASK, vcm);
 		else
 			b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC,
 					  0xE3, vcm_final << 2);
@@ -2041,6 +2142,10 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 		rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_5G;
 	}
 	if (dev->phy.rev >= 7) {
+		rssical_radio_regs[0] = b43_radio_read(dev,
+						       R2057_NB_MASTER_CORE0);
+		rssical_radio_regs[1] = b43_radio_read(dev,
+						       R2057_NB_MASTER_CORE1);
 	} else {
 		rssical_radio_regs[0] = b43_radio_read(dev, B2056_RX0 |
 						       B2056_RX_RSSI_MISC);
@@ -2477,14 +2582,6 @@ static void b43_nphy_gain_ctl_workarounds(struct b43_wldev *dev)
 		b43_nphy_gain_ctl_workarounds_rev1_2(dev);
 }
 
-/* http://bcm-v4.sipsolutions.net/PHY/N/Read_Lpf_Bw_Ctl */
-static u16 b43_nphy_read_lpf_ctl(struct b43_wldev *dev, u16 offset)
-{
-	if (!offset)
-		offset = b43_is_40mhz(dev) ? 0x159 : 0x154;
-	return b43_ntab_read(dev, B43_NTAB16(7, offset)) & 0x7;
-}
-
 static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
 {
 	struct ssb_sprom *sprom = dev->dev->bus_sprom;
@@ -3171,6 +3268,7 @@ static void b43_nphy_update_txrx_chain(struct b43_wldev *dev)
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/stop-playback */
 static void b43_nphy_stop_playback(struct b43_wldev *dev)
 {
+	struct b43_phy *phy = &dev->phy;
 	struct b43_phy_n *nphy = dev->phy.n;
 	u16 tmp;
 
@@ -3191,8 +3289,13 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
 		nphy->bb_mult_save = 0;
 	}
 
-	if (dev->phy.rev >= 7) {
-		/* TODO */
+	if (phy->rev >= 7) {
+		if (phy->rev >= 19)
+			b43_nphy_rf_ctl_override_rev19(dev, 0x80, 0, 0, true,
+						       1);
+		else
+			b43_nphy_rf_ctl_override_rev7(dev, 0x80, 0, 0, true, 1);
+		nphy->lpf_bw_overrode_for_sample_play = false;
 	}
 
 	if (nphy->hang_avoid)
@@ -3209,6 +3312,7 @@ static void b43_nphy_iq_cal_gain_params(struct b43_wldev *dev, u16 core,
 	u16 gain;
 
 	if (dev->phy.rev >= 3) {
+		params->tx_lpf = target.tx_lpf[core]; /* Rev 7+ */
 		params->txgm = target.txgm[core];
 		params->pga = target.pga[core];
 		params->pad = target.pad[core];
@@ -3216,7 +3320,7 @@ static void b43_nphy_iq_cal_gain_params(struct b43_wldev *dev, u16 core,
 		if (phy->rev >= 19) {
 			/* TODO */
 		} else if (phy->rev >= 7) {
-			/* TODO */
+			params->cal_gain = (params->txgm << 12) | (params->pga << 8) | (params->pad << 3) | (params->ipa) | (params->tx_lpf << 15);
 		} else {
 			params->cal_gain = (params->txgm << 12) | (params->pga << 8) | (params->pad << 4) | (params->ipa);
 		}
@@ -3333,7 +3437,12 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
 			if (phy->rev >= 19) {
 				/* TODO */
 			} else if (phy->rev >= 7) {
-				/* TODO */
+				b43_phy_maskset(dev, B43_NPHY_TXPCTL_CMD,
+						~B43_NPHY_TXPCTL_CMD_INIT,
+						0x32);
+				b43_phy_maskset(dev, B43_NPHY_TXPCTL_INIT,
+						~B43_NPHY_TXPCTL_INIT_PIDXI1,
+						0x32);
 			} else {
 				b43_phy_maskset(dev, B43_NPHY_TXPCTL_CMD,
 						~B43_NPHY_TXPCTL_CMD_INIT,
@@ -3921,8 +4030,7 @@ static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
 						       B43_NPHY_RFCTL_INTC2);
 		band = b43_current_band(dev->wl);
 		if (dev->phy.rev >= 7) {
-			/* TODO */
-			return;
+			tmp = 0x1480;
 		} else if (dev->phy.rev >= 3) {
 			if (band == IEEE80211_BAND_5GHZ)
 				tmp = 0x600;
@@ -4373,7 +4481,10 @@ static void b43_nphy_restore_rssi_cal(struct b43_wldev *dev)
 	if (dev->phy.rev >= 19) {
 		/* TODO */
 	} else if (dev->phy.rev >= 7) {
-		/* TODO */
+		b43_radio_maskset(dev, R2057_NB_MASTER_CORE0, ~R2057_VCM_MASK,
+				  rssical_radio_regs[0]);
+		b43_radio_maskset(dev, R2057_NB_MASTER_CORE1, ~R2057_VCM_MASK,
+				  rssical_radio_regs[1]);
 	} else {
 		b43_radio_maskset(dev, B2056_RX0 | B2056_RX_RSSI_MISC, 0xE3,
 				  rssical_radio_regs[0]);
@@ -4404,7 +4515,55 @@ static void b43_nphy_tx_cal_radio_setup_rev19(struct b43_wldev *dev)
 
 static void b43_nphy_tx_cal_radio_setup_rev7(struct b43_wldev *dev)
 {
-	/* TODO */
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = dev->phy.n;
+	u16 *save = nphy->tx_rx_cal_radio_saveregs;
+	int core, off;
+	u16 r, tmp;
+
+	for (core = 0; core < 2; core++) {
+		r = core ? 0x20 : 0;
+		off = core * 11;
+
+		save[off + 0] = b43_radio_read(dev, r + R2057_TX0_TX_SSI_MASTER);
+		save[off + 1] = b43_radio_read(dev, r + R2057_TX0_IQCAL_VCM_HG);
+		save[off + 2] = b43_radio_read(dev, r + R2057_TX0_IQCAL_IDAC);
+		save[off + 3] = b43_radio_read(dev, r + R2057_TX0_TSSI_VCM);
+		save[off + 4] = 0;
+		save[off + 5] = b43_radio_read(dev, r + R2057_TX0_TX_SSI_MUX);
+		if (phy->radio_rev != 5)
+			save[off + 6] = b43_radio_read(dev, r + R2057_TX0_TSSIA);
+		save[off + 7] = b43_radio_read(dev, r + R2057_TX0_TSSIG);
+		save[off + 8] = b43_radio_read(dev, r + R2057_TX0_TSSI_MISC1);
+
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+			b43_radio_write(dev, r + R2057_TX0_TX_SSI_MASTER, 0xA);
+			b43_radio_write(dev, r + R2057_TX0_IQCAL_VCM_HG, 0x43);
+			b43_radio_write(dev, r + R2057_TX0_IQCAL_IDAC, 0x55);
+			b43_radio_write(dev, r + R2057_TX0_TSSI_VCM, 0);
+			b43_radio_write(dev, r + R2057_TX0_TSSIG, 0);
+			if (nphy->use_int_tx_iq_lo_cal) {
+				b43_radio_write(dev, r + R2057_TX0_TX_SSI_MUX, 0x4);
+				tmp = true ? 0x31 : 0x21; /* TODO */
+				b43_radio_write(dev, r + R2057_TX0_TSSIA, tmp);
+			}
+			b43_radio_write(dev, r + R2057_TX0_TSSI_MISC1, 0x00);
+		} else {
+			b43_radio_write(dev, r + R2057_TX0_TX_SSI_MASTER, 0x6);
+			b43_radio_write(dev, r + R2057_TX0_IQCAL_VCM_HG, 0x43);
+			b43_radio_write(dev, r + R2057_TX0_IQCAL_IDAC, 0x55);
+			b43_radio_write(dev, r + R2057_TX0_TSSI_VCM, 0);
+
+			if (phy->radio_rev != 5)
+				b43_radio_write(dev, r + R2057_TX0_TSSIA, 0);
+			if (nphy->use_int_tx_iq_lo_cal) {
+				b43_radio_write(dev, r + R2057_TX0_TX_SSI_MUX, 0x6);
+				tmp = true ? 0x31 : 0x21; /* TODO */
+				b43_radio_write(dev, r + R2057_TX0_TSSIG, tmp);
+			}
+			b43_radio_write(dev, r + R2057_TX0_TSSI_MISC1, 0);
+		}
+	}
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxCalRadioSetup */
@@ -4585,7 +4744,13 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 			b43_nphy_stay_in_carrier_search(dev, false);
 
 		for (i = 0; i < 2; ++i) {
-			if (dev->phy.rev >= 3) {
+			if (dev->phy.rev >= 7) {
+				target.ipa[i] = curr_gain[i] & 0x0007;
+				target.pad[i] = (curr_gain[i] & 0x00F8) >> 3;
+				target.pga[i] = (curr_gain[i] & 0x0F00) >> 8;
+				target.txgm[i] = (curr_gain[i] & 0x7000) >> 12;
+				target.tx_lpf[i] = (curr_gain[i] & 0x8000) >> 15;
+			} else if (dev->phy.rev >= 3) {
 				target.ipa[i] = curr_gain[i] & 0x000F;
 				target.pad[i] = (curr_gain[i] & 0x00F0) >> 4;
 				target.pga[i] = (curr_gain[i] & 0x0F00) >> 8;
@@ -4612,7 +4777,13 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 			if (!table)
 				break;
 
-			if (dev->phy.rev >= 3) {
+			if (dev->phy.rev >= 7) {
+				target.ipa[i] = (table[index[i]] >> 16) & 0x7;
+				target.pad[i] = (table[index[i]] >> 19) & 0x1F;
+				target.pga[i] = (table[index[i]] >> 24) & 0xF;
+				target.txgm[i] = (table[index[i]] >> 28) & 0x7;
+				target.tx_lpf[i] = (table[index[i]] >> 31) & 0x1;
+			} else if (dev->phy.rev >= 3) {
 				target.ipa[i] = (table[index[i]] >> 16) & 0xF;
 				target.pad[i] = (table[index[i]] >> 20) & 0xF;
 				target.pga[i] = (table[index[i]] >> 24) & 0xF;
@@ -4662,6 +4833,7 @@ static void b43_nphy_tx_cal_phy_cleanup(struct b43_wldev *dev)
 static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = dev->phy.n;
 	u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
 	u16 tmp;
 
@@ -4693,7 +4865,12 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 		regs[7] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
 		regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
 
-		b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_PA, 1, 3);
+		if (!nphy->use_int_tx_iq_lo_cal)
+			b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_PA,
+						      1, 3);
+		else
+			b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_PA,
+						      0, 3);
 		b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 2, 1);
 		b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 8, 2);
 
@@ -4702,18 +4879,30 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 		b43_phy_mask(dev, B43_NPHY_PAPD_EN0, ~0x0001);
 		b43_phy_mask(dev, B43_NPHY_PAPD_EN1, ~0x0001);
 
+		tmp = b43_nphy_read_lpf_ctl(dev, 0);
 		if (phy->rev >= 19)
-			; /* TODO */
+			b43_nphy_rf_ctl_override_rev19(dev, 0x80, tmp, 0, false,
+						       1);
 		else if (phy->rev >= 7)
-			; /* TODO */
+			b43_nphy_rf_ctl_override_rev7(dev, 0x80, tmp, 0, false,
+						      1);
 
-		if (0 /* FIXME */) {
+		if (nphy->use_int_tx_iq_lo_cal && true /* FIXME */) {
 			if (phy->rev >= 19) {
-				/* TODO */
+				b43_nphy_rf_ctl_override_rev19(dev, 0x8, 0, 0x3,
+							       false, 0);
 			} else if (phy->rev >= 8) {
-				/* TODO */
+				b43_nphy_rf_ctl_override_rev7(dev, 0x8, 0, 0x3,
+							      false, 0);
 			} else if (phy->rev == 7) {
-				/* TODO */
+				b43_radio_maskset(dev, R2057_OVR_REG0, 1 << 4, 1 << 4);
+				if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+					b43_radio_maskset(dev, R2057_PAD2G_TUNE_PUS_CORE0, ~1, 0);
+					b43_radio_maskset(dev, R2057_PAD2G_TUNE_PUS_CORE1, ~1, 0);
+				} else {
+					b43_radio_maskset(dev, R2057_IPA5G_CASCOFFV_PU_CORE0, ~1, 0);
+					b43_radio_maskset(dev, R2057_IPA5G_CASCOFFV_PU_CORE1, ~1, 0);
+				}
 			}
 		}
 	} else {
@@ -4772,7 +4961,22 @@ static void b43_nphy_save_cal(struct b43_wldev *dev)
 	if (phy->rev >= 19) {
 		/* TODO */
 	} else if (phy->rev >= 7) {
-		/* TODO */
+		txcal_radio_regs[0] = b43_radio_read(dev,
+						     R2057_TX0_LOFT_FINE_I);
+		txcal_radio_regs[1] = b43_radio_read(dev,
+						     R2057_TX0_LOFT_FINE_Q);
+		txcal_radio_regs[4] = b43_radio_read(dev,
+						     R2057_TX0_LOFT_COARSE_I);
+		txcal_radio_regs[5] = b43_radio_read(dev,
+						     R2057_TX0_LOFT_COARSE_Q);
+		txcal_radio_regs[2] = b43_radio_read(dev,
+						     R2057_TX1_LOFT_FINE_I);
+		txcal_radio_regs[3] = b43_radio_read(dev,
+						     R2057_TX1_LOFT_FINE_Q);
+		txcal_radio_regs[6] = b43_radio_read(dev,
+						     R2057_TX1_LOFT_COARSE_I);
+		txcal_radio_regs[7] = b43_radio_read(dev,
+						     R2057_TX1_LOFT_COARSE_Q);
 	} else if (phy->rev >= 3) {
 		txcal_radio_regs[0] = b43_radio_read(dev, 0x2021);
 		txcal_radio_regs[1] = b43_radio_read(dev, 0x2022);
@@ -4851,7 +5055,22 @@ static void b43_nphy_restore_cal(struct b43_wldev *dev)
 	if (phy->rev >= 19) {
 		/* TODO */
 	} else if (phy->rev >= 7) {
-		/* TODO */
+		b43_radio_write(dev, R2057_TX0_LOFT_FINE_I,
+				txcal_radio_regs[0]);
+		b43_radio_write(dev, R2057_TX0_LOFT_FINE_Q,
+				txcal_radio_regs[1]);
+		b43_radio_write(dev, R2057_TX0_LOFT_COARSE_I,
+				txcal_radio_regs[4]);
+		b43_radio_write(dev, R2057_TX0_LOFT_COARSE_Q,
+				txcal_radio_regs[5]);
+		b43_radio_write(dev, R2057_TX1_LOFT_FINE_I,
+				txcal_radio_regs[2]);
+		b43_radio_write(dev, R2057_TX1_LOFT_FINE_Q,
+				txcal_radio_regs[3]);
+		b43_radio_write(dev, R2057_TX1_LOFT_COARSE_I,
+				txcal_radio_regs[6]);
+		b43_radio_write(dev, R2057_TX1_LOFT_COARSE_Q,
+				txcal_radio_regs[7]);
 	} else if (phy->rev >= 3) {
 		b43_radio_write(dev, 0x2021, txcal_radio_regs[0]);
 		b43_radio_write(dev, 0x2022, txcal_radio_regs[1]);
@@ -4932,7 +5151,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 	if (phy->rev >= 19) {
 		/* TODO */
 	} else if (phy->rev >= 7) {
-		/* TODO */
+		b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8AD9);
 	} else {
 		b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8AA9);
 	}
@@ -5496,6 +5715,10 @@ static int b43_phy_initn(struct b43_wldev *dev)
 #endif
 		}
 	}
+	nphy->use_int_tx_iq_lo_cal = b43_nphy_ipa(dev) ||
+		phy->rev >= 7 ||
+		(phy->rev >= 5 &&
+		 sprom->boardflags2_hi & B43_BFH2_INTERNDET_TXIQCAL);
 	nphy->deaf_count = 0;
 	b43_nphy_tables_init(dev);
 	nphy->crsminpwr_adjusted = false;
@@ -5506,7 +5729,10 @@ static int b43_phy_initn(struct b43_wldev *dev)
 		b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S1, 0);
 		b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0);
 		if (phy->rev >= 7) {
-			/* TODO */
+			b43_phy_write(dev, B43_NPHY_REV7_RF_CTL_OVER3, 0);
+			b43_phy_write(dev, B43_NPHY_REV7_RF_CTL_OVER4, 0);
+			b43_phy_write(dev, B43_NPHY_REV7_RF_CTL_OVER5, 0);
+			b43_phy_write(dev, B43_NPHY_REV7_RF_CTL_OVER6, 0);
 		}
 		if (phy->rev >= 19) {
 			/* TODO */
@@ -6032,13 +6258,17 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
 		b43err(dev->wl, "MAC not suspended\n");
 
 	if (blocked) {
-		b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
-				~B43_NPHY_RFCTL_CMD_CHIP0PU);
 		if (phy->rev >= 19) {
 			/* TODO */
+		} else if (phy->rev >= 8) {
+			b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
+				     ~B43_NPHY_RFCTL_CMD_CHIP0PU);
 		} else if (phy->rev >= 7) {
-			/* TODO */
+			/* Nothing needed */
 		} else if (phy->rev >= 3) {
+			b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
+				     ~B43_NPHY_RFCTL_CMD_CHIP0PU);
+
 			b43_radio_mask(dev, 0x09, ~0x2);
 
 			b43_radio_write(dev, 0x204D, 0);
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index ecfbf66dbc3b..7fd5d5f9161d 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -857,6 +857,15 @@
 #define B43_NPHY_REV3_C2_CLIP2_GAIN_A		B43_PHY_N(0x2AF)
 #define B43_NPHY_REV3_C2_CLIP2_GAIN_B		B43_PHY_N(0x2B0)
 
+#define B43_NPHY_REV7_RF_CTL_MISC_REG3		B43_PHY_N(0x340)
+#define B43_NPHY_REV7_RF_CTL_MISC_REG4		B43_PHY_N(0x341)
+#define B43_NPHY_REV7_RF_CTL_OVER3		B43_PHY_N(0x342)
+#define B43_NPHY_REV7_RF_CTL_OVER4		B43_PHY_N(0x343)
+#define B43_NPHY_REV7_RF_CTL_MISC_REG5		B43_PHY_N(0x344)
+#define B43_NPHY_REV7_RF_CTL_MISC_REG6		B43_PHY_N(0x345)
+#define B43_NPHY_REV7_RF_CTL_OVER5		B43_PHY_N(0x346)
+#define B43_NPHY_REV7_RF_CTL_OVER6		B43_PHY_N(0x347)
+
 #define B43_PHY_B_BBCFG				B43_PHY_N_BMODE(0x001) /* BB config */
 #define B43_PHY_B_TEST				B43_PHY_N_BMODE(0x00A)
 
@@ -935,6 +944,8 @@ struct b43_phy_n {
 	bool gain_boost;
 	bool elna_gain_config;
 	bool band5g_pwrgain;
+	bool use_int_tx_iq_lo_cal;
+	bool lpf_bw_overrode_for_sample_play;
 
 	u8 mphase_cal_phase_id;
 	u16 mphase_txcal_cmdidx;
diff --git a/drivers/net/wireless/b43/radio_2057.h b/drivers/net/wireless/b43/radio_2057.h
index 675d1bb64429..220d080238ff 100644
--- a/drivers/net/wireless/b43/radio_2057.h
+++ b/drivers/net/wireless/b43/radio_2057.h
@@ -84,6 +84,8 @@
 #define R2057_CMOSBUF_RX_RCCR			0x04c
 #define R2057_LOGEN_SEL_PKDET			0x04d
 #define R2057_CMOSBUF_SHAREIQ_PTAT		0x04e
+
+/* MISC core 0 */
 #define R2057_RXTXBIAS_CONFIG_CORE0		0x04f
 #define R2057_TXGM_TXRF_PUS_CORE0		0x050
 #define R2057_TXGM_IDAC_BLEED_CORE0		0x051
@@ -204,6 +206,8 @@
 #define R2057_RXBB_GPAIOSEL_RXLPF_RCCAL_CORE0	0x0d1
 #define R2057_LPF_GAIN_CORE0			0x0d2
 #define R2057_DACBUF_IDACS_BW_CORE0		0x0d3
+
+/* MISC core 1 */
 #define R2057_RXTXBIAS_CONFIG_CORE1		0x0d4
 #define R2057_TXGM_TXRF_PUS_CORE1		0x0d5
 #define R2057_TXGM_IDAC_BLEED_CORE1		0x0d6
@@ -324,6 +328,7 @@
 #define R2057_RXBB_GPAIOSEL_RXLPF_RCCAL_CORE1	0x156
 #define R2057_LPF_GAIN_CORE1			0x157
 #define R2057_DACBUF_IDACS_BW_CORE1		0x158
+
 #define R2057_DACBUF_VINCM_CORE1		0x159
 #define R2057_RCCAL_START_R1_Q1_P1		0x15a
 #define R2057_RCCAL_X1				0x15b
@@ -345,6 +350,8 @@
 #define R2057_RCCAL_BCAP_VAL			0x16b
 #define R2057_RCCAL_HPC_VAL			0x16c
 #define R2057_RCCAL_OVERRIDES			0x16d
+
+/* TX core 0 */
 #define R2057_TX0_IQCAL_GAIN_BW			0x170
 #define R2057_TX0_LOFT_FINE_I			0x171
 #define R2057_TX0_LOFT_FINE_Q			0x172
@@ -362,6 +369,8 @@
 #define R2057_TX0_TXRXCOUPLE_2G_PWRUP		0x17e
 #define R2057_TX0_TXRXCOUPLE_5G_ATTEN		0x17f
 #define R2057_TX0_TXRXCOUPLE_5G_PWRUP		0x180
+
+/* TX core 1 */
 #define R2057_TX1_IQCAL_GAIN_BW			0x190
 #define R2057_TX1_LOFT_FINE_I			0x191
 #define R2057_TX1_LOFT_FINE_Q			0x192
@@ -379,6 +388,7 @@
 #define R2057_TX1_TXRXCOUPLE_2G_PWRUP		0x19e
 #define R2057_TX1_TXRXCOUPLE_5G_ATTEN		0x19f
 #define R2057_TX1_TXRXCOUPLE_5G_PWRUP		0x1a0
+
 #define R2057_AFE_VCM_CAL_MASTER_CORE0		0x1a1
 #define R2057_AFE_SET_VCM_I_CORE0		0x1a2
 #define R2057_AFE_SET_VCM_Q_CORE0		0x1a3
-- 
cgit v1.2.3


From 3695b9324ee9bb801d7e0e76fa991683997758d6 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Tue, 8 Jul 2014 15:11:10 +0200
Subject: b43: enable radio 0x2057 rev 9 (AKA BCM43228) support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Support for N-PHY rev 8 with 0x2057 rev 5 is almost ready, but we still
need to figure out how to handle rev 9 first.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 8dd69a3ae7ac..ad335307a3d4 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -210,6 +210,9 @@ static struct ieee80211_channel b43_2ghz_chantable[] = {
 	CHAN2G(13, 2472, 0),
 	CHAN2G(14, 2484, 0),
 };
+
+/* No support for the last 3 channels (12, 13, 14) */
+#define b43_2ghz_chantable_limited_size		11
 #undef CHAN2G
 
 #define CHAN4G(_channel, _flags) {				\
@@ -335,6 +338,14 @@ static struct ieee80211_supported_band b43_band_2GHz = {
 	.n_bitrates	= b43_g_ratetable_size,
 };
 
+static struct ieee80211_supported_band b43_band_2ghz_limited = {
+	.band		= IEEE80211_BAND_2GHZ,
+	.channels	= b43_2ghz_chantable,
+	.n_channels	= b43_2ghz_chantable_limited_size,
+	.bitrates	= b43_g_ratetable,
+	.n_bitrates	= b43_g_ratetable_size,
+};
+
 static void b43_wireless_core_exit(struct b43_wldev *dev);
 static int b43_wireless_core_init(struct b43_wldev *dev);
 static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev);
@@ -4459,7 +4470,10 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_N:
-		if (radio_ver != 0x2055 && radio_ver != 0x2056)
+		if (radio_ver != 0x2055 && radio_ver != 0x2056 &&
+		    radio_ver != 0x2057)
+			unsupported = 1;
+		if (radio_ver == 0x2057 && !(radio_rev == 9))
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_LP:
@@ -5095,9 +5109,15 @@ static int b43_setup_bands(struct b43_wldev *dev,
 			   bool have_2ghz_phy, bool have_5ghz_phy)
 {
 	struct ieee80211_hw *hw = dev->wl->hw;
+	struct b43_phy *phy = &dev->phy;
+	bool limited_2g;
+
+	/* We don't support all 2 GHz channels on some devices */
+	limited_2g = phy->radio_ver == 0x2057 && phy->radio_rev == 9;
 
 	if (have_2ghz_phy)
-		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz;
+		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = limited_2g ?
+			&b43_band_2ghz_limited : &b43_band_2GHz;
 	if (dev->phy.type == B43_PHYTYPE_N) {
 		if (have_5ghz_phy)
 			hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy;
-- 
cgit v1.2.3


From 72fcd3d16c16cd47a897cd72cd9a231aab01ac5b Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Tue, 8 Jul 2014 21:00:19 +0200
Subject: b43: don't warn about no 5 GHz support on 2.4 GHz devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This could be a bit confusing to see warning about lacking support for
5 GHz band if your device supports 2.4 GHz only.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index ad335307a3d4..3dcd3aa38608 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5268,14 +5268,16 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 	b43_supported_bands(dev, &have_2ghz_phy, &have_5ghz_phy);
 
 	/* We don't support 5 GHz on some PHYs yet */
-	switch (dev->phy.type) {
-	case B43_PHYTYPE_A:
-	case B43_PHYTYPE_G:
-	case B43_PHYTYPE_N:
-	case B43_PHYTYPE_LP:
-	case B43_PHYTYPE_HT:
-		b43warn(wl, "5 GHz band is unsupported on this PHY\n");
-		have_5ghz_phy = false;
+	if (have_5ghz_phy) {
+		switch (dev->phy.type) {
+		case B43_PHYTYPE_A:
+		case B43_PHYTYPE_G:
+		case B43_PHYTYPE_N:
+		case B43_PHYTYPE_LP:
+		case B43_PHYTYPE_HT:
+			b43warn(wl, "5 GHz band is unsupported on this PHY\n");
+			have_5ghz_phy = false;
+		}
 	}
 
 	if (!have_2ghz_phy && !have_5ghz_phy) {
-- 
cgit v1.2.3


From c2cb2c4cf1a089501242a1701b589d2ad5eb0448 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 17 Jul 2014 19:31:05 +0200
Subject: b43: use one shared function for setting MAC frequency
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

By the way add few chipsets that were tracked with "wl" dumps.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c    | 39 ++++++++++++++++++++++++++++++++++++++
 drivers/net/wireless/b43/main.h    |  1 +
 drivers/net/wireless/b43/phy_lcn.c | 35 +---------------------------------
 drivers/net/wireless/b43/phy_n.c   |  7 +------
 include/linux/bcma/bcma.h          |  1 +
 5 files changed, 43 insertions(+), 40 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 3dcd3aa38608..3e127be06bfb 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2964,6 +2964,45 @@ void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
 	}
 }
 
+/* brcms_b_switch_macfreq */
+void b43_mac_switch_freq(struct b43_wldev *dev, u8 spurmode)
+{
+	u16 chip_id = dev->dev->chip_id;
+
+	if (chip_id == BCMA_CHIP_ID_BCM43217 ||
+	    chip_id == BCMA_CHIP_ID_BCM43222 ||
+	    chip_id == BCMA_CHIP_ID_BCM43224 ||
+	    chip_id == BCMA_CHIP_ID_BCM43225 ||
+	    chip_id == BCMA_CHIP_ID_BCM43227 ||
+	    chip_id == BCMA_CHIP_ID_BCM43228) {
+		switch (spurmode) {
+		case 2: /* 126 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x2082);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
+			break;
+		case 1: /* 123 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x5341);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
+			break;
+		default: /* 120 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x8889);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
+			break;
+		}
+	} else if (dev->phy.type == B43_PHYTYPE_LCN) {
+		switch (spurmode) {
+		case 1: /* 82 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x7CE0);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
+			break;
+		default: /* 80 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0xCCCD);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
+			break;
+		}
+	}
+}
+
 static void b43_adjust_opmode(struct b43_wldev *dev)
 {
 	struct b43_wl *wl = dev->wl;
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index f476fc337d64..9f22e4b4c132 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -99,6 +99,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags);
 void b43_mac_suspend(struct b43_wldev *dev);
 void b43_mac_enable(struct b43_wldev *dev);
 void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on);
+void b43_mac_switch_freq(struct b43_wldev *dev, u8 spurmode);
 
 
 struct b43_request_fw_context;
diff --git a/drivers/net/wireless/b43/phy_lcn.c b/drivers/net/wireless/b43/phy_lcn.c
index 0bafa3b17035..e76bbdf3247e 100644
--- a/drivers/net/wireless/b43/phy_lcn.c
+++ b/drivers/net/wireless/b43/phy_lcn.c
@@ -54,39 +54,6 @@ enum lcn_sense_type {
 	B43_SENSE_VBAT,
 };
 
-/* In theory it's PHY common function, move if needed */
-/* brcms_b_switch_macfreq */
-static void b43_phy_switch_macfreq(struct b43_wldev *dev, u8 spurmode)
-{
-	if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) {
-		switch (spurmode) {
-		case 2:		/* 126 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x2082);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-			break;
-		case 1:		/* 123 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x5341);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-			break;
-		default:	/* 120 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x8889);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-			break;
-		}
-	} else if (dev->phy.type == B43_PHYTYPE_LCN) {
-		switch (spurmode) {
-		case 1:		/* 82 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x7CE0);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
-			break;
-		default:	/* 80 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0xCCCD);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
-			break;
-		}
-	}
-}
-
 /**************************************************
  * Radio 2064.
  **************************************************/
@@ -609,7 +576,7 @@ static void b43_phy_lcn_txrx_spur_avoidance_mode(struct b43_wldev *dev,
 		b43_phy_write(dev, 0x93b, ((0 << 13) + 23));
 		b43_phy_write(dev, 0x93c, ((0 << 13) + 1989));
 	}
-	b43_phy_switch_macfreq(dev, enable);
+	b43_mac_switch_freq(dev, enable);
 }
 
 /**************************************************
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index ef1acaec7027..0f0c1306b0ad 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -6113,12 +6113,7 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev,
 
 		b43_nphy_pmu_spur_avoid(dev, avoid);
 
-		if (dev->dev->chip_id == 43222 || dev->dev->chip_id == 43224 ||
-		    dev->dev->chip_id == 43225) {
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW,
-				    avoid ? 0x5341 : 0x8889);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-		}
+		b43_mac_switch_freq(dev, avoid);
 
 		if (dev->phy.rev == 3 || dev->phy.rev == 4)
 			; /* TODO: reset PLL */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 7cb2344741cf..969af0f2bdf9 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -159,6 +159,7 @@ struct bcma_host_ops {
 #define BCMA_CHIP_ID_BCM4313	0x4313
 #define BCMA_CHIP_ID_BCM43142	43142
 #define BCMA_CHIP_ID_BCM43217	43217
+#define BCMA_CHIP_ID_BCM43222	43222
 #define BCMA_CHIP_ID_BCM43224	43224
 #define  BCMA_PKG_ID_BCM43224_FAB_CSM	0x8
 #define  BCMA_PKG_ID_BCM43224_FAB_SMIC	0xa
-- 
cgit v1.2.3


From c11082f0c00acde7c9049e92dbcafd1f73fb60e6 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 19 Jul 2014 12:52:47 +0200
Subject: b43: enable radio 0x2057 rev 14 support (AKA BCM43217)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 3e127be06bfb..73f629ccfa0f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4512,7 +4512,8 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 		if (radio_ver != 0x2055 && radio_ver != 0x2056 &&
 		    radio_ver != 0x2057)
 			unsupported = 1;
-		if (radio_ver == 0x2057 && !(radio_rev == 9))
+		if (radio_ver == 0x2057 &&
+		    !(radio_rev == 9 || radio_rev == 14))
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_LP:
@@ -5152,7 +5153,8 @@ static int b43_setup_bands(struct b43_wldev *dev,
 	bool limited_2g;
 
 	/* We don't support all 2 GHz channels on some devices */
-	limited_2g = phy->radio_ver == 0x2057 && phy->radio_rev == 9;
+	limited_2g = phy->radio_ver == 0x2057 &&
+		     (phy->radio_rev == 9 || phy->radio_rev == 14);
 
 	if (have_2ghz_phy)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = limited_2g ?
-- 
cgit v1.2.3


From 16e754535a69152c12494da18eb3ea7947f5a434 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 20 Jul 2014 12:57:45 +0200
Subject: b43: extract one more radio parameter: version
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some radios may share the same ID and revision but differ by a version.
E.g. radio in BCM5357B0 is version 1 and requires specific handling.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 46 ++++++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 21 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 73f629ccfa0f..47b6fa5fa5b2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4385,8 +4385,9 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 	u8 phy_type;
 	u8 phy_rev;
 	u16 radio_manuf;
-	u16 radio_ver;
+	u16 radio_id;
 	u16 radio_rev;
+	u8 radio_ver;
 	int unsupported = 0;
 
 	/* Get PHY versioning */
@@ -4452,7 +4453,9 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 		radio_rev = b43_read16(dev, B43_MMIO_RADIO24_DATA);
 
 		b43_write16(dev, B43_MMIO_RADIO24_CONTROL, 1);
-		radio_ver = b43_read16(dev, B43_MMIO_RADIO24_DATA);
+		radio_id = b43_read16(dev, B43_MMIO_RADIO24_DATA);
+
+		radio_ver = 0; /* Is there version somewhere? */
 	} else if (core_rev >= 24) {
 		u16 radio24[3];
 
@@ -4461,12 +4464,10 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 			radio24[tmp] = b43_read16(dev, B43_MMIO_RADIO24_DATA);
 		}
 
-		/* Broadcom uses "id" for our "ver" and has separated "ver" */
-		/* radio_ver = (radio24[0] & 0xF0) >> 4; */
-
 		radio_manuf = 0x17F;
-		radio_ver = (radio24[2] << 8) | radio24[1];
+		radio_id = (radio24[2] << 8) | radio24[1];
 		radio_rev = (radio24[0] & 0xF);
+		radio_ver = (radio24[0] & 0xF0) >> 4;
 	} else {
 		if (dev->dev->chip_id == 0x4317) {
 			if (dev->dev->chip_rev == 0)
@@ -4485,15 +4486,16 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 				<< 16;
 		}
 		radio_manuf = (tmp & 0x00000FFF);
-		radio_ver = (tmp & 0x0FFFF000) >> 12;
+		radio_id = (tmp & 0x0FFFF000) >> 12;
 		radio_rev = (tmp & 0xF0000000) >> 28;
+		radio_ver = 0; /* Probably not available on old hw */
 	}
 
 	if (radio_manuf != 0x17F /* Broadcom */)
 		unsupported = 1;
 	switch (phy_type) {
 	case B43_PHYTYPE_A:
-		if (radio_ver != 0x2060)
+		if (radio_id != 0x2060)
 			unsupported = 1;
 		if (radio_rev != 1)
 			unsupported = 1;
@@ -4501,31 +4503,31 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_B:
-		if ((radio_ver & 0xFFF0) != 0x2050)
+		if ((radio_id & 0xFFF0) != 0x2050)
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_G:
-		if (radio_ver != 0x2050)
+		if (radio_id != 0x2050)
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_N:
-		if (radio_ver != 0x2055 && radio_ver != 0x2056 &&
-		    radio_ver != 0x2057)
+		if (radio_id != 0x2055 && radio_id != 0x2056 &&
+		    radio_id != 0x2057)
 			unsupported = 1;
-		if (radio_ver == 0x2057 &&
+		if (radio_id == 0x2057 &&
 		    !(radio_rev == 9 || radio_rev == 14))
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_LP:
-		if (radio_ver != 0x2062 && radio_ver != 0x2063)
+		if (radio_id != 0x2062 && radio_id != 0x2063)
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_HT:
-		if (radio_ver != 0x2059)
+		if (radio_id != 0x2059)
 			unsupported = 1;
 		break;
 	case B43_PHYTYPE_LCN:
-		if (radio_ver != 0x2064)
+		if (radio_id != 0x2064)
 			unsupported = 1;
 		break;
 	default:
@@ -4533,15 +4535,17 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 	}
 	if (unsupported) {
 		b43err(dev->wl,
-		       "FOUND UNSUPPORTED RADIO (Manuf 0x%X, ID 0x%X, Revision %u)\n",
-		       radio_manuf, radio_ver, radio_rev);
+		       "FOUND UNSUPPORTED RADIO (Manuf 0x%X, ID 0x%X, Revision %u, Version %u)\n",
+		       radio_manuf, radio_id, radio_rev, radio_ver);
 		return -EOPNOTSUPP;
 	}
-	b43info(dev->wl, "Found Radio: Manuf 0x%X, ID 0x%X, Revision %u\n",
-		radio_manuf, radio_ver, radio_rev);
+	b43info(dev->wl,
+		"Found Radio: Manuf 0x%X, ID 0x%X, Revision %u, Version %u\n",
+		radio_manuf, radio_id, radio_rev, radio_ver);
 
+	/* FIXME: b43 treats "id" as "ver" and ignores the real "ver" */
 	phy->radio_manuf = radio_manuf;
-	phy->radio_ver = radio_ver;
+	phy->radio_ver = radio_id;
 	phy->radio_rev = radio_rev;
 
 	phy->analog = analog_type;
-- 
cgit v1.2.3


From b453fda6bad14d1932ef35356c860f3bfd6d9d6d Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 23 Jul 2014 18:54:49 +0200
Subject: b43: register limited amount of 5G channels for BCM43228
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We don't have all needed channel tables due to RE process for this
device.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 47b6fa5fa5b2..3b4b192c0792 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -290,6 +290,14 @@ static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
 	CHAN5G(182, 0),
 };
 
+static struct ieee80211_channel b43_5ghz_nphy_chantable_limited[] = {
+	CHAN5G(36, 0),		CHAN5G(40, 0),
+	CHAN5G(44, 0),		CHAN5G(48, 0),
+	CHAN5G(149, 0),		CHAN5G(153, 0),
+	CHAN5G(157, 0),		CHAN5G(161, 0),
+	CHAN5G(165, 0),
+};
+
 static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
 	CHAN5G(34, 0),		CHAN5G(36, 0),
 	CHAN5G(38, 0),		CHAN5G(40, 0),
@@ -322,6 +330,14 @@ static struct ieee80211_supported_band b43_band_5GHz_nphy = {
 	.n_bitrates	= b43_a_ratetable_size,
 };
 
+static struct ieee80211_supported_band b43_band_5GHz_nphy_limited = {
+	.band		= IEEE80211_BAND_5GHZ,
+	.channels	= b43_5ghz_nphy_chantable_limited,
+	.n_channels	= ARRAY_SIZE(b43_5ghz_nphy_chantable_limited),
+	.bitrates	= b43_a_ratetable,
+	.n_bitrates	= b43_a_ratetable_size,
+};
+
 static struct ieee80211_supported_band b43_band_5GHz_aphy = {
 	.band		= IEEE80211_BAND_5GHZ,
 	.channels	= b43_5ghz_aphy_chantable,
@@ -5155,17 +5171,22 @@ static int b43_setup_bands(struct b43_wldev *dev,
 	struct ieee80211_hw *hw = dev->wl->hw;
 	struct b43_phy *phy = &dev->phy;
 	bool limited_2g;
+	bool limited_5g;
 
 	/* We don't support all 2 GHz channels on some devices */
 	limited_2g = phy->radio_ver == 0x2057 &&
 		     (phy->radio_rev == 9 || phy->radio_rev == 14);
+	limited_5g = phy->radio_ver == 0x2057 &&
+		     phy->radio_rev == 9;
 
 	if (have_2ghz_phy)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = limited_2g ?
 			&b43_band_2ghz_limited : &b43_band_2GHz;
 	if (dev->phy.type == B43_PHYTYPE_N) {
 		if (have_5ghz_phy)
-			hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy;
+			hw->wiphy->bands[IEEE80211_BAND_5GHZ] = limited_5g ?
+				&b43_band_5GHz_nphy_limited :
+				&b43_band_5GHz_nphy;
 	} else {
 		if (have_5ghz_phy)
 			hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy;
-- 
cgit v1.2.3


From bac9832076ee3b134bc859e07698c99276fc9459 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 23 Jul 2014 18:54:50 +0200
Subject: b43: enable 5 GHz support for N-PHY devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This has been tested on 14e4:4328 (BCM4321), 14e4:432b (BCM4322),
14e4:4353 (BCM43224) and 14e4:4359 (BCM43228) which is an almost
complete list of 5 GHz capable device (only BCM43222 is missing).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 3b4b192c0792..d7055febe119 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5338,7 +5338,6 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 		switch (dev->phy.type) {
 		case B43_PHYTYPE_A:
 		case B43_PHYTYPE_G:
-		case B43_PHYTYPE_N:
 		case B43_PHYTYPE_LP:
 		case B43_PHYTYPE_HT:
 			b43warn(wl, "5 GHz band is unsupported on this PHY\n");
-- 
cgit v1.2.3


From a67d19d4c5b92853550dc20f4afce8c914a8ea0b Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 24 Jul 2014 15:29:18 +0200
Subject: b43: add support for BCM43131 chipset with N-PHY rev 17
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't
require any magic. The main difference is that BCM4313 is 1x1:1.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c  | 3 ++-
 drivers/net/wireless/b43/phy_n.c | 3 ++-
 include/linux/bcma/bcma.h        | 1 +
 3 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/b43/main.c')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index d7055febe119..2af1ac396eb4 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2985,7 +2985,8 @@ void b43_mac_switch_freq(struct b43_wldev *dev, u8 spurmode)
 {
 	u16 chip_id = dev->dev->chip_id;
 
-	if (chip_id == BCMA_CHIP_ID_BCM43217 ||
+	if (chip_id == BCMA_CHIP_ID_BCM43131 ||
+	    chip_id == BCMA_CHIP_ID_BCM43217 ||
 	    chip_id == BCMA_CHIP_ID_BCM43222 ||
 	    chip_id == BCMA_CHIP_ID_BCM43224 ||
 	    chip_id == BCMA_CHIP_ID_BCM43225 ||
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index d269fbb27b9e..1eead7af6899 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -4982,7 +4982,8 @@ static void b43_nphy_int_pa_set_tx_dig_filters(struct b43_wldev *dev)
 	if (dev->phy.rev == 16)
 		b43_nphy_pa_set_tx_dig_filter(dev, 0x186, dig_filter_phy_rev16);
 
-	if (dev->dev->chip_id == BCMA_CHIP_ID_BCM43217) {
+	/* Verified with BCM43131 and BCM43217 */
+	if (dev->phy.rev == 17) {
 		b43_nphy_pa_set_tx_dig_filter(dev, 0x186, dig_filter_phy_rev16);
 		b43_nphy_pa_set_tx_dig_filter(dev, 0x195,
 					      tbl_tx_filter_coef_rev4[1]);
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 969af0f2bdf9..70b8d88b3982 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -158,6 +158,7 @@ struct bcma_host_ops {
 /* Chip IDs of PCIe devices */
 #define BCMA_CHIP_ID_BCM4313	0x4313
 #define BCMA_CHIP_ID_BCM43142	43142
+#define BCMA_CHIP_ID_BCM43131	43131
 #define BCMA_CHIP_ID_BCM43217	43217
 #define BCMA_CHIP_ID_BCM43222	43222
 #define BCMA_CHIP_ID_BCM43224	43224
-- 
cgit v1.2.3