From 6f538fe31c1d453b7e7fc4f6e7c6a9bdead4a6f2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 7 Dec 2012 11:36:08 +0100 Subject: tty: serial core: decouple pm states from ACPI The serial core is using power states lifted from ACPI for no good reason. Remove this reference from the documentation and alter all users to use an enum specific to the serial core instead, and define it in . Signed-off-by: Linus Walleij Acked-by: Alan Cox Reviewed-by: Daniel Lezcano Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 2c7230aaefd4..82d7ce8c9409 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -59,7 +59,8 @@ static struct lock_class_key port_lock_key; static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); -static void uart_change_pm(struct uart_state *state, int pm_state); +static void uart_change_pm(struct uart_state *state, + enum uart_pm_state pm_state); static void uart_port_shutdown(struct tty_port *port); @@ -1365,7 +1366,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) spin_lock_irqsave(&port->lock, flags); } else if (!uart_console(uport)) { spin_unlock_irqrestore(&port->lock, flags); - uart_change_pm(state, 3); + uart_change_pm(state, UART_PM_STATE_OFF); spin_lock_irqsave(&port->lock, flags); } @@ -1579,7 +1580,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) * Make sure the device is in D0 state. */ if (port->count == 1) - uart_change_pm(state, 0); + uart_change_pm(state, UART_PM_STATE_ON); /* * Start up the serial port. @@ -1620,7 +1621,7 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) { struct uart_state *state = drv->state + i; struct tty_port *port = &state->port; - int pm_state; + enum uart_pm_state pm_state; struct uart_port *uport = state->uart_port; char stat_buf[32]; unsigned int status; @@ -1645,12 +1646,12 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) if (capable(CAP_SYS_ADMIN)) { mutex_lock(&port->mutex); pm_state = state->pm_state; - if (pm_state) - uart_change_pm(state, 0); + if (pm_state != UART_PM_STATE_ON) + uart_change_pm(state, UART_PM_STATE_ON); spin_lock_irq(&uport->lock); status = uport->ops->get_mctrl(uport); spin_unlock_irq(&uport->lock); - if (pm_state) + if (pm_state != UART_PM_STATE_ON) uart_change_pm(state, pm_state); mutex_unlock(&port->mutex); @@ -1897,7 +1898,8 @@ EXPORT_SYMBOL_GPL(uart_set_options); * * Locking: port->mutex has to be held */ -static void uart_change_pm(struct uart_state *state, int pm_state) +static void uart_change_pm(struct uart_state *state, + enum uart_pm_state pm_state) { struct uart_port *port = state->uart_port; @@ -1982,7 +1984,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) console_stop(uport->cons); if (console_suspend_enabled || !uart_console(uport)) - uart_change_pm(state, 3); + uart_change_pm(state, UART_PM_STATE_OFF); mutex_unlock(&port->mutex); @@ -2027,7 +2029,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) termios = port->tty->termios; if (console_suspend_enabled) - uart_change_pm(state, 0); + uart_change_pm(state, UART_PM_STATE_ON); uport->ops->set_termios(uport, &termios, NULL); if (console_suspend_enabled) console_start(uport->cons); @@ -2037,7 +2039,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) const struct uart_ops *ops = uport->ops; int ret; - uart_change_pm(state, 0); + uart_change_pm(state, UART_PM_STATE_ON); spin_lock_irq(&uport->lock); ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); @@ -2137,7 +2139,7 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, uart_report_port(drv, port); /* Power up port for set_mctrl() */ - uart_change_pm(state, 0); + uart_change_pm(state, UART_PM_STATE_ON); /* * Ensure that the modem control lines are de-activated. @@ -2161,7 +2163,7 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, * console if we have one. */ if (!uart_console(port)) - uart_change_pm(state, 3); + uart_change_pm(state, UART_PM_STATE_OFF); } } @@ -2588,7 +2590,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) } state->uart_port = uport; - state->pm_state = -1; + state->pm_state = UART_PM_STATE_UNDEFINED; uport->cons = drv->cons; uport->state = state; -- cgit v1.2.3 From ef4f527c48c8fcbb5e35dafaef4f9097f5e9d901 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Wed, 26 Dec 2012 20:43:41 -0800 Subject: tty: Fix comments that reference BKL, eventd, old paths Signed-off-by: Kevin Cernekee Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 18 +++++++++--------- drivers/tty/tty_io.c | 2 +- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 82d7ce8c9409..ba7863bbbb4d 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1309,9 +1309,10 @@ static void uart_set_termios(struct tty_struct *tty, } /* - * In 2.4.5, calls to this will be serialized via the BKL in - * linux/drivers/char/tty_io.c:tty_release() - * linux/drivers/char/tty_io.c:do_tty_handup() + * Calls to uart_close() are serialised via the tty_lock in + * drivers/tty/tty_io.c:tty_release() + * drivers/tty/tty_io.c:do_tty_hangup() + * This runs from a workqueue and can sleep for a _short_ time only. */ static void uart_close(struct tty_struct *tty, struct file *filp) { @@ -1438,10 +1439,9 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) } /* - * This is called with the BKL held in - * linux/drivers/char/tty_io.c:do_tty_hangup() - * We're called from the eventd thread, so we can sleep for - * a _short_ time only. + * Calls to uart_hangup() are serialised by the tty_lock in + * drivers/tty/tty_io.c:do_tty_hangup() + * This runs from a workqueue and can sleep for a _short_ time only. */ static void uart_hangup(struct tty_struct *tty) { @@ -1522,8 +1522,8 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) } /* - * calls to uart_open are serialised by the BKL in - * fs/char_dev.c:chrdev_open() + * Calls to uart_open are serialised by the tty_lock in + * drivers/tty/tty_io.c:tty_open() * Note that if this fails, then uart_close() _will_ be called. * * In time, we want to scrap the "opening nonpresent ports" diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index da9fde850754..54a254ab85c7 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -536,7 +536,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); * __tty_hangup - actual handler for hangup events * @work: tty device * - * This can be called by the "eventd" kernel thread. That is process + * This can be called by a "kworker" kernel thread. That is process * synchronous but doesn't hold any locks, so we need to make sure we * have the appropriate locks for what we're doing. * -- cgit v1.2.3 From 92a19f9cec9a80ad93c06e115822deb729e2c6ad Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 3 Jan 2013 15:53:03 +0100 Subject: TTY: switch tty_insert_flip_char Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- arch/alpha/kernel/srmcons.c | 3 ++- arch/ia64/hp/sim/simserial.c | 3 ++- arch/mn10300/kernel/mn10300-serial.c | 4 +-- arch/parisc/kernel/pdc_cons.c | 2 +- arch/um/drivers/chan_kern.c | 8 +----- arch/xtensa/platforms/iss/console.c | 3 ++- drivers/char/pcmcia/synclink_cs.c | 2 +- drivers/ipack/devices/ipoctal.c | 5 ++-- drivers/isdn/i4l/isdn_common.c | 8 +++--- drivers/isdn/i4l/isdn_tty.c | 12 ++++----- drivers/mmc/card/sdio_uart.c | 5 ++-- drivers/s390/char/con3215.c | 3 ++- drivers/s390/char/keyboard.h | 4 +-- drivers/s390/char/sclp_tty.c | 4 +-- drivers/staging/dgrp/dgrp_net_ops.c | 2 +- drivers/staging/fwserial/fwserial.c | 2 +- drivers/staging/serqt_usb2/serqt_usb2.c | 13 +++++---- drivers/tty/amiserial.c | 4 +-- drivers/tty/cyclades.c | 24 ++++++++--------- drivers/tty/hvc/hvc_console.c | 2 +- drivers/tty/hvc/hvsi.c | 22 +++++++-------- drivers/tty/isicom.c | 4 +-- drivers/tty/moxa.c | 2 +- drivers/tty/mxser.c | 4 +-- drivers/tty/n_gsm.c | 24 ++++++++++------- drivers/tty/nozomi.c | 2 +- drivers/tty/rocket.c | 3 ++- drivers/tty/serial/68328serial.c | 2 +- drivers/tty/serial/ar933x_uart.c | 10 +++---- drivers/tty/serial/bcm63xx_uart.c | 7 ++--- drivers/tty/serial/bfin_sport_uart.c | 10 ++++--- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 2 +- drivers/tty/serial/crisv10.c | 10 +++---- drivers/tty/serial/efm32-uart.c | 15 +++++------ drivers/tty/serial/icom.c | 7 ++--- drivers/tty/serial/imx.c | 4 ++- drivers/tty/serial/jsm/jsm_tty.c | 8 +++--- drivers/tty/serial/kgdb_nmi.c | 2 +- drivers/tty/serial/lantiq.c | 7 ++--- drivers/tty/serial/lpc32xx_hs.c | 12 +++++---- drivers/tty/serial/m32r_sio.c | 7 ++--- drivers/tty/serial/mpc52xx_uart.c | 7 ++--- drivers/tty/serial/mpsc.c | 4 +-- drivers/tty/serial/msm_serial.c | 12 +++++---- drivers/tty/serial/msm_serial_hs.c | 12 ++++----- drivers/tty/serial/mux.c | 5 ++-- drivers/tty/serial/nwpserial.c | 5 ++-- drivers/tty/serial/pmac_zilog.c | 8 +++--- drivers/tty/serial/sc26xx.c | 10 ++++--- drivers/tty/serial/serial_core.c | 6 ++--- drivers/tty/serial/sh-sci.c | 34 ++++++++++++----------- drivers/tty/serial/sn_console.c | 6 +++-- drivers/tty/serial/sunhv.c | 4 +-- drivers/tty/serial/sunsab.c | 16 +++++------ drivers/tty/serial/sunsu.c | 7 ++--- drivers/tty/serial/sunzilog.c | 17 +++++------- drivers/tty/serial/timbuart.c | 4 +-- drivers/tty/serial/uartlite.c | 8 +++--- drivers/tty/serial/ucc_uart.c | 4 +-- drivers/tty/serial/vt8500_serial.c | 7 ++--- drivers/tty/synclink.c | 4 +-- drivers/tty/synclink_gt.c | 8 +++--- drivers/tty/synclinkmp.c | 42 +++++++++++++---------------- drivers/tty/vt/keyboard.c | 6 ++--- drivers/tty/vt/vt.c | 2 +- drivers/usb/serial/ark3116.c | 2 +- drivers/usb/serial/belkin_sa.c | 2 +- drivers/usb/serial/digi_acceleport.c | 2 +- drivers/usb/serial/f81232.c | 5 ++-- drivers/usb/serial/ftdi_sio.c | 11 ++++---- drivers/usb/serial/generic.c | 2 +- drivers/usb/serial/keyspan.c | 21 ++++++++------- drivers/usb/serial/pl2303.c | 5 ++-- drivers/usb/serial/spcp8x5.c | 2 +- drivers/usb/serial/ssu100.c | 10 +++---- include/linux/tty_flip.h | 6 ++--- 76 files changed, 297 insertions(+), 286 deletions(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 59b7bbad8394..21b57a66e809 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -46,13 +46,14 @@ typedef union _srmcons_result { static int srmcons_do_receive_chars(struct tty_struct *tty) { + struct tty_port *port = tty->port; srmcons_result result; int count = 0, loops = 0; do { result.as_long = callback_getc(0); if (result.bits.status < 2) { - tty_insert_flip_char(tty, (char)result.bits.c, 0); + tty_insert_flip_char(port, (char)result.bits.c, 0); count++; } } while((result.bits.status & 1) && (++loops < 10)); diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index fc3924d18c1f..f8ae5d8eb106 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -55,6 +55,7 @@ static struct console *console; static void receive_chars(struct tty_struct *tty) { + struct tty_port *port = tty->port; unsigned char ch; static unsigned char seen_esc = 0; @@ -81,7 +82,7 @@ static void receive_chars(struct tty_struct *tty) } seen_esc = 0; - if (tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0) + if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0) break; } tty_flip_buffer_push(tty); diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index 9b2232a78ff9..54ef40ceaaed 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -667,14 +667,14 @@ insert: else flag = TTY_NORMAL; - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(port, ch, flag); } /* overrun is special, since it's reported immediately, and doesn't * affect the current character */ if (overrun) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); count--; if (count <= 0) { diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index efc5e7d30530..4d92a379eb21 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -147,7 +147,7 @@ static void pdc_console_poll(unsigned long unused) data = pdc_console_poll_key(NULL); if (data == -1) break; - tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL); + tty_insert_flip_char(&tty_port, data & 0xFF, TTY_NORMAL); count ++; } diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 4ff2503a1bb8..795bd8102205 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -81,12 +81,6 @@ static const struct chan_ops not_configged_ops = { }; #endif /* CONFIG_NOCONFIG_CHAN */ -static void tty_receive_char(struct tty_struct *tty, char ch) -{ - if (tty) - tty_insert_flip_char(tty, ch, TTY_NORMAL); -} - static int open_one_chan(struct chan *chan) { int fd, err; @@ -569,7 +563,7 @@ void chan_interrupt(struct line *line, struct tty_struct *tty, int irq) } err = chan->ops->read(chan->fd, &c, chan->data); if (err > 0) - tty_receive_char(tty, c); + tty_insert_flip_char(port, c, TTY_NORMAL); } while (err > 0); if (err == 0) diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 8207a119eee9..62447d63890c 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -98,6 +98,7 @@ static int rs_write(struct tty_struct * tty, static void rs_poll(unsigned long priv) { struct tty_struct* tty = (struct tty_struct*) priv; + struct tty_port *port = tty->port; struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; int i = 0; @@ -107,7 +108,7 @@ static void rs_poll(unsigned long priv) while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){ __simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0); - tty_insert_flip_char(tty, c, TTY_NORMAL); + tty_insert_flip_char(port, c, TTY_NORMAL); i++; } diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 0b1de715f097..9bdfe27b2413 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -945,7 +945,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty) else if (status & BIT6) flag = TTY_FRAME; } - work += tty_insert_flip_char(tty, data, flag); + work += tty_insert_flip_char(port, data, flag); } issue_command(info, CHA, CMD_RXFIFO); diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index 576d53d92677..8e0ed663ba9b 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -136,6 +136,7 @@ static int ipoctal_get_icount(struct tty_struct *tty, static void ipoctal_irq_rx(struct ipoctal_channel *channel, struct tty_struct *tty, u8 sr) { + struct tty_port *port = &channel->tty_port; unsigned char value; unsigned char flag = TTY_NORMAL; u8 isr; @@ -149,7 +150,7 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, if (sr & SR_OVERRUN_ERROR) { channel->stats.overrun_err++; /* Overrun doesn't affect the current character*/ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); } if (sr & SR_PARITY_ERROR) { channel->stats.parity_err++; @@ -165,7 +166,7 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, flag = TTY_BREAK; } } - tty_insert_flip_char(tty, value, flag); + tty_insert_flip_char(port, value, flag); /* Check if there are more characters in RX FIFO * If there are more, the isr register for this channel diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index 7093169ee0c9..4a387ec021ad 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -913,7 +913,7 @@ isdn_readbchan_tty(int di, int channel, struct tty_struct *tty, int cisco_hack) while ((count_pull < skb->len) && (len > 0)) { /* push every character but the last to the tty buffer directly */ if (count_put) - tty_insert_flip_char(tty, last, TTY_NORMAL); + tty_insert_flip_char(port, last, TTY_NORMAL); len--; if (dev->drv[di]->DLEflag & DLEmask) { last = DLE; @@ -953,16 +953,16 @@ isdn_readbchan_tty(int di, int channel, struct tty_struct *tty, int cisco_hack) * Now we can dequeue it. */ if (cisco_hack) - tty_insert_flip_char(tty, last, 0xFF); + tty_insert_flip_char(port, last, 0xFF); else - tty_insert_flip_char(tty, last, TTY_NORMAL); + tty_insert_flip_char(port, last, TTY_NORMAL); #ifdef CONFIG_ISDN_AUDIO ISDN_AUDIO_SKB_LOCK(skb) = 0; #endif skb = skb_dequeue(&dev->drv[di]->rpqueue[channel]); dev_kfree_skb(skb); } else { - tty_insert_flip_char(tty, last, TTY_NORMAL); + tty_insert_flip_char(port, last, TTY_NORMAL); /* Not yet emptied this buff, so it * must stay in the queue, for further calls * but we pull off the data we got until now. diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index 4f5bcee7cf32..32d65d4bc848 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -92,11 +92,11 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb) unsigned char *dp = skb->data; while (--l) { if (*dp == DLE) - tty_insert_flip_char(tty, DLE, 0); - tty_insert_flip_char(tty, *dp++, 0); + tty_insert_flip_char(port, DLE, 0); + tty_insert_flip_char(port, *dp++, 0); } if (*dp == DLE) - tty_insert_flip_char(tty, DLE, 0); + tty_insert_flip_char(port, DLE, 0); last = *dp; } else { #endif @@ -107,9 +107,9 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb) } #endif if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP) - tty_insert_flip_char(tty, last, 0xFF); + tty_insert_flip_char(port, last, 0xFF); else - tty_insert_flip_char(tty, last, TTY_NORMAL); + tty_insert_flip_char(port, last, TTY_NORMAL); tty_flip_buffer_push(tty); kfree_skb(skb); @@ -2287,7 +2287,7 @@ isdn_tty_at_cout(char *msg, modem_info *info) if (skb) { *sp++ = c; } else { - if (tty_insert_flip_char(tty, c, TTY_NORMAL) == 0) + if (tty_insert_flip_char(port, c, TTY_NORMAL) == 0) break; } } diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index bd57a11acc79..894078be0b96 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -419,7 +419,7 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0) if (tty) - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(&port->port, ch, flag); /* * Overrun is special. Since it's reported immediately, @@ -427,7 +427,8 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, */ if (*status & ~port->ignore_status_mask & UART_LSR_OE) if (tty) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); *status = sdio_in(port, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 40084501c31b..7c7294590880 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -411,7 +411,8 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm, break; case CTRLCHAR_CTRL: - tty_insert_flip_char(tty, cchar, TTY_NORMAL); + tty_insert_flip_char(&raw->port, cchar, + TTY_NORMAL); tty_flip_buffer_push(tty); break; diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h index d0ae2be58191..acab28d4f06b 100644 --- a/drivers/s390/char/keyboard.h +++ b/drivers/s390/char/keyboard.h @@ -46,7 +46,7 @@ kbd_put_queue(struct tty_port *port, int ch) struct tty_struct *tty = tty_port_tty_get(port); if (!tty) return; - tty_insert_flip_char(tty, ch, 0); + tty_insert_flip_char(port, ch, 0); tty_schedule_flip(tty); tty_kref_put(tty); } @@ -58,7 +58,7 @@ kbd_puts_queue(struct tty_port *port, char *cp) if (!tty) return; while (*cp) - tty_insert_flip_char(tty, *cp++, 0); + tty_insert_flip_char(port, *cp++, 0); tty_schedule_flip(tty); tty_kref_put(tty); } diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index 877fbc37c1e7..c03863a7d455 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -342,7 +342,7 @@ sclp_tty_input(unsigned char* buf, unsigned int count) case CTRLCHAR_SYSRQ: break; case CTRLCHAR_CTRL: - tty_insert_flip_char(tty, cchar, TTY_NORMAL); + tty_insert_flip_char(&sclp_port, cchar, TTY_NORMAL); tty_flip_buffer_push(tty); break; case CTRLCHAR_NONE: @@ -352,7 +352,7 @@ sclp_tty_input(unsigned char* buf, unsigned int count) strncmp((const char *) buf + count - 2, "\252n", 2))) { /* add the auto \n */ tty_insert_flip_string(tty, buf, count); - tty_insert_flip_char(tty, '\n', TTY_NORMAL); + tty_insert_flip_char(&sclp_port, '\n', TTY_NORMAL); } else tty_insert_flip_string(tty, buf, count - 2); tty_flip_buffer_push(tty); diff --git a/drivers/staging/dgrp/dgrp_net_ops.c b/drivers/staging/dgrp/dgrp_net_ops.c index df3ebcdf7ed8..e618a667d84c 100644 --- a/drivers/staging/dgrp/dgrp_net_ops.c +++ b/drivers/staging/dgrp/dgrp_net_ops.c @@ -2957,7 +2957,7 @@ check_query: !(I_IGNBRK(ch->ch_tun.un_tty))) { tty_buffer_request_room(&ch->port, 1); - tty_insert_flip_char(ch->ch_tun.un_tty, 0, TTY_BREAK); + tty_insert_flip_char(&ch->port, 0, TTY_BREAK); tty_flip_buffer_push(ch->ch_tun.un_tty); } diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index 85dbdc1eccec..a2a0c43dec1c 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -617,7 +617,7 @@ static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len) lsr &= port->status_mask; if (lsr & ~port->ignore_mask & UART_LSR_OE) { - if (!tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { + if (!tty_insert_flip_char(&port->port, 0, TTY_OVERRUN)) { err = -EIO; goto out; } diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 1b3e995d3a27..14965662d09c 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -255,12 +255,11 @@ static void ProcessModemStatus(struct quatech_port *qt_port, wake_up_interruptible(&qt_port->wait); } -static void ProcessRxChar(struct tty_struct *tty, struct usb_serial_port *port, - unsigned char data) +static void ProcessRxChar(struct usb_serial_port *port, unsigned char data) { struct urb *urb = port->read_urb; if (urb->actual_length) - tty_insert_flip_char(tty, data, TTY_NORMAL); + tty_insert_flip_char(&port->port, data, TTY_NORMAL); } static void qt_write_bulk_callback(struct urb *urb) @@ -335,8 +334,8 @@ static void qt_status_change_check(struct tty_struct *tty, case 0xff: dev_dbg(&port->dev, "No status sequence.\n"); - ProcessRxChar(tty, port, data[i]); - ProcessRxChar(tty, port, data[i + 1]); + ProcessRxChar(port, data[i]); + ProcessRxChar(port, data[i + 1]); i += 2; break; @@ -345,8 +344,8 @@ static void qt_status_change_check(struct tty_struct *tty, continue; } - if (tty && urb->actual_length) - tty_insert_flip_char(tty, data[i], TTY_NORMAL); + if (urb->actual_length) + tty_insert_flip_char(&port->port, data[i], TTY_NORMAL); } tty_flip_buffer_push(tty); diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 9d7d00cdfecb..2e670d0c5366 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -328,9 +328,9 @@ static void receive_chars(struct serial_state *info) oe = 1; } } - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(&info->tport, ch, flag); if (oe == 1) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&info->tport, 0, TTY_OVERRUN); tty_flip_buffer_push(tty); out: return; diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 0b7573dbf439..d1fe9a1f8475 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -492,34 +492,34 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, if (tty_buffer_request_room(port, 1)) { if (data & info->read_status_mask) { if (data & CyBREAK) { - tty_insert_flip_char(tty, + tty_insert_flip_char(port, cyy_readb(info, CyRDSR), TTY_BREAK); info->icount.rx++; if (port->flags & ASYNC_SAK) do_SAK(tty); } else if (data & CyFRAME) { - tty_insert_flip_char(tty, + tty_insert_flip_char(port, cyy_readb(info, CyRDSR), TTY_FRAME); info->icount.rx++; info->idle_stats.frame_errs++; } else if (data & CyPARITY) { /* Pieces of seven... */ - tty_insert_flip_char(tty, + tty_insert_flip_char(port, cyy_readb(info, CyRDSR), TTY_PARITY); info->icount.rx++; info->idle_stats.parity_errs++; } else if (data & CyOVERRUN) { - tty_insert_flip_char(tty, 0, + tty_insert_flip_char(port, 0, TTY_OVERRUN); info->icount.rx++; /* If the flip buffer itself is overflowing, we still lose the next incoming character. */ - tty_insert_flip_char(tty, + tty_insert_flip_char(port, cyy_readb(info, CyRDSR), TTY_FRAME); info->icount.rx++; @@ -529,12 +529,12 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, /* } else if(data & CyTIMEOUT) { */ /* } else if(data & CySPECHAR) { */ } else { - tty_insert_flip_char(tty, 0, + tty_insert_flip_char(port, 0, TTY_NORMAL); info->icount.rx++; } } else { - tty_insert_flip_char(tty, 0, TTY_NORMAL); + tty_insert_flip_char(port, 0, TTY_NORMAL); info->icount.rx++; } } else { @@ -557,7 +557,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, len = tty_buffer_request_room(port, char_count); while (len--) { data = cyy_readb(info, CyRDSR); - tty_insert_flip_char(tty, data, TTY_NORMAL); + tty_insert_flip_char(port, data, TTY_NORMAL); info->idle_stats.recv_bytes++; info->icount.rx++; #ifdef CY_16Y_HACK @@ -992,7 +992,7 @@ static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty) new_rx_get); new_rx_get = (new_rx_get + 1) & (rx_bufsize - 1); - tty_insert_flip_char(tty, data, TTY_NORMAL); + tty_insert_flip_char(port, data, TTY_NORMAL); info->idle_stats.recv_bytes++; info->icount.rx++; } @@ -1117,17 +1117,17 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) switch (cmd) { case C_CM_PR_ERROR: - tty_insert_flip_char(tty, 0, TTY_PARITY); + tty_insert_flip_char(&info->port, 0, TTY_PARITY); info->icount.rx++; special_count++; break; case C_CM_FR_ERROR: - tty_insert_flip_char(tty, 0, TTY_FRAME); + tty_insert_flip_char(&info->port, 0, TTY_FRAME); info->icount.rx++; special_count++; break; case C_CM_RXBRK: - tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_insert_flip_char(&info->port, 0, TTY_BREAK); info->icount.rx++; special_count++; break; diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 3d2ea92b8505..8c2fe3a0e091 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -672,7 +672,7 @@ int hvc_poll(struct hvc_struct *hp) } } #endif /* CONFIG_MAGIC_SYSRQ */ - tty_insert_flip_char(tty, buf[i], 0); + tty_insert_flip_char(&hp->port, buf[i], 0); } read_total += n; diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 68357a6e4de9..1f528b8ebf5f 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -329,8 +329,7 @@ static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet) } } -static void hvsi_insert_chars(struct hvsi_struct *hp, struct tty_struct *tty, - const char *buf, int len) +static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len) { int i; @@ -346,7 +345,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, struct tty_struct *tty, continue; } #endif /* CONFIG_MAGIC_SYSRQ */ - tty_insert_flip_char(tty, c, 0); + tty_insert_flip_char(&hp->port, c, 0); } } @@ -359,8 +358,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, struct tty_struct *tty, * revisited. */ #define TTY_THRESHOLD_THROTTLE 128 -static bool hvsi_recv_data(struct hvsi_struct *hp, struct tty_struct *tty, - const uint8_t *packet) +static bool hvsi_recv_data(struct hvsi_struct *hp, const uint8_t *packet) { const struct hvsi_header *header = (const struct hvsi_header *)packet; const uint8_t *data = packet + sizeof(struct hvsi_header); @@ -377,7 +375,7 @@ static bool hvsi_recv_data(struct hvsi_struct *hp, struct tty_struct *tty, datalen = TTY_THRESHOLD_THROTTLE; } - hvsi_insert_chars(hp, tty, data, datalen); + hvsi_insert_chars(hp, data, datalen); if (overflow > 0) { /* @@ -438,9 +436,7 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty, case VS_DATA_PACKET_HEADER: if (!is_open(hp)) break; - if (tty == NULL) - break; /* no tty buffer to put data in */ - flip = hvsi_recv_data(hp, tty, packet); + flip = hvsi_recv_data(hp, packet); break; case VS_CONTROL_PACKET_HEADER: hvsi_recv_control(hp, packet, tty, handshake); @@ -474,12 +470,12 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty, return 1; } -static void hvsi_send_overflow(struct hvsi_struct *hp, struct tty_struct *tty) +static void hvsi_send_overflow(struct hvsi_struct *hp) { pr_debug("%s: delivering %i bytes overflow\n", __func__, hp->n_throttle); - hvsi_insert_chars(hp, tty, hp->throttle_buf, hp->n_throttle); + hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle); hp->n_throttle = 0; } @@ -514,7 +510,7 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg) if (tty && hp->n_throttle && !test_bit(TTY_THROTTLED, &tty->flags)) { /* we weren't hung up and we weren't throttled, so we can * deliver the rest now */ - hvsi_send_overflow(hp, tty); + hvsi_send_overflow(hp); tty_flip_buffer_push(tty); } spin_unlock_irqrestore(&hp->lock, flags); @@ -1001,7 +997,7 @@ static void hvsi_unthrottle(struct tty_struct *tty) spin_lock_irqsave(&hp->lock, flags); if (hp->n_throttle) { - hvsi_send_overflow(hp, tty); + hvsi_send_overflow(hp); tty_flip_buffer_push(tty); } spin_unlock_irqrestore(&hp->lock, flags); diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index e9fc15f00f48..c70144f55fc0 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -634,7 +634,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) break; case 1: /* Received Break !!! */ - tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_insert_flip_char(&port->port, 0, TTY_BREAK); if (port->port.flags & ASYNC_SAK) do_SAK(tty); tty_flip_buffer_push(tty); @@ -658,7 +658,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) insw(base, rp, word_count); byte_count -= (word_count << 1); if (count & 0x0001) { - tty_insert_flip_char(tty, inw(base) & 0xff, + tty_insert_flip_char(&port->port, inw(base) & 0xff, TTY_NORMAL); byte_count -= 2; } diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index fcaac4870d5f..f42492db31c9 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -1429,7 +1429,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle, goto put; if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */ - tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_insert_flip_char(&p->port, 0, TTY_BREAK); tty_schedule_flip(tty); } diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 40113868bec2..450c4507cb5b 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -2079,7 +2079,7 @@ static void mxser_receive_chars(struct tty_struct *tty, } while (gdl--) { ch = inb(port->ioaddr + UART_RX); - tty_insert_flip_char(tty, ch, 0); + tty_insert_flip_char(&port->port, ch, 0); cnt++; } goto end_intr; @@ -2118,7 +2118,7 @@ intr_old: } else flag = TTY_BREAK; } - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(&port->port, ch, flag); cnt++; if (cnt >= recv_room) { if (!port->ldisc_stop_rx) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 4572117988f8..769016504c88 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1070,9 +1070,9 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD)) if (!(tty->termios.c_cflag & CLOCAL)) tty_hangup(tty); - if (brk & 0x01) - tty_insert_flip_char(tty, 0, TTY_BREAK); } + if (brk & 0x01) + tty_insert_flip_char(&dlci->port, 0, TTY_BREAK); dlci->modem_rx = mlines; } @@ -1140,6 +1140,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen) { + struct tty_port *port; struct tty_struct *tty; unsigned int addr = 0 ; u8 bits; @@ -1163,16 +1164,19 @@ static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen) bits = *dp; if ((bits & 1) == 0) return; - /* See if we have an uplink tty */ - tty = tty_port_tty_get(&gsm->dlci[addr]->port); + port = &gsm->dlci[addr]->port; + + if (bits & 2) + tty_insert_flip_char(port, 0, TTY_OVERRUN); + if (bits & 4) + tty_insert_flip_char(port, 0, TTY_PARITY); + if (bits & 8) + tty_insert_flip_char(port, 0, TTY_FRAME); + + /* See if we have an uplink tty */ + tty = tty_port_tty_get(port); if (tty) { - if (bits & 2) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - if (bits & 4) - tty_insert_flip_char(tty, 0, TTY_PARITY); - if (bits & 8) - tty_insert_flip_char(tty, 0, TTY_FRAME); tty_flip_buffer_push(tty); tty_kref_put(tty); } diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index a0c69ab04399..437a6366fb7b 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -855,7 +855,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX); if (size == 1) { - tty_insert_flip_char(tty, buf[0], TTY_NORMAL); + tty_insert_flip_char(&port->port, buf[0], TTY_NORMAL); size = 0; } else if (size < RECEIVE_BUF_MAX) { size -= tty_insert_flip_string(tty, (char *) buf, size); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 77d7bc94afaa..5848a767001a 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -379,7 +379,8 @@ static void rp_do_receive(struct r_port *info, flag = TTY_OVERRUN; else flag = TTY_NORMAL; - tty_insert_flip_char(tty, CharNStat & 0xff, flag); + tty_insert_flip_char(&info->port, CharNStat & 0xff, + flag); ToRecv--; } diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index f99a84526f82..3719273cf0be 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -305,7 +305,7 @@ static void receive_chars(struct m68k_serial *info, struct tty_struct *tty, else if (rx & URX_FRAME_ERROR) flag = TTY_FRAME; - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(&info->tport, ch, flag); #ifndef CONFIG_XCOPILOT_BUGS } while((rx = uart->urx.w) & URX_DATA_READY); #endif diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 505c490c0b44..6ca5dd615f9e 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -297,10 +297,11 @@ static void ar933x_uart_set_termios(struct uart_port *port, static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) { + struct tty_port *port = &up->port.state->port; struct tty_struct *tty; int max_count = 256; - tty = tty_port_tty_get(&up->port.state->port); + tty = tty_port_tty_get(port); do { unsigned int rdata; unsigned char ch; @@ -313,11 +314,6 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) ar933x_uart_write(up, AR933X_UART_DATA_REG, AR933X_UART_DATA_RX_CSR); - if (!tty) { - /* discard the data if no tty available */ - continue; - } - up->port.icount.rx++; ch = rdata & AR933X_UART_DATA_TX_RX_MASK; @@ -325,7 +321,7 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) continue; if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) - tty_insert_flip_char(tty, ch, TTY_NORMAL); + tty_insert_flip_char(port, ch, TTY_NORMAL); } while (max_count-- > 0); if (tty) { diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index c76a226080f2..de30b1909728 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -235,6 +235,7 @@ static const char *bcm_uart_type(struct uart_port *port) */ static void bcm_uart_do_rx(struct uart_port *port) { + struct tty_port *port = &port->state->port; struct tty_struct *tty; unsigned int max_count; @@ -242,7 +243,7 @@ static void bcm_uart_do_rx(struct uart_port *port) * higher than fifo size anyway since we're much faster than * serial port */ max_count = 32; - tty = port->state->port.tty; + tty = port->tty; do { unsigned int iestat, c, cstat; char flag; @@ -261,7 +262,7 @@ static void bcm_uart_do_rx(struct uart_port *port) bcm_uart_writel(port, val, UART_CTL_REG); port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); } if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) @@ -300,7 +301,7 @@ static void bcm_uart_do_rx(struct uart_port *port) if ((cstat & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, c, flag); + tty_insert_flip_char(port, c, flag); } while (--max_count); diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index f5d117379b60..e4d3ac2e8992 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -149,7 +149,8 @@ static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) { struct sport_uart_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; + struct tty_port *port = &up->port.state->port; + struct tty_struct *tty = tport->tty; unsigned int ch; spin_lock(&up->port.lock); @@ -159,7 +160,7 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) up->port.icount.rx++; if (!uart_handle_sysrq_char(&up->port, ch)) - tty_insert_flip_char(tty, ch, TTY_NORMAL); + tty_insert_flip_char(port, ch, TTY_NORMAL); } tty_flip_buffer_push(tty); @@ -182,7 +183,6 @@ static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) { struct sport_uart_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; unsigned int stat = SPORT_GET_STAT(up); spin_lock(&up->port.lock); @@ -190,7 +190,7 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) /* Overflow in RX FIFO */ if (stat & ROVF) { up->port.icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&up->port.state->port, 0, TTY_OVERRUN); SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */ } /* These should not happen */ @@ -205,6 +205,8 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) SSYNC(); spin_unlock(&up->port.lock); + /* XXX we don't push the overrun bit to TTY? */ + return IRQ_HANDLED; } diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 42d5eb0125b3..108122f8f3c2 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -303,7 +303,7 @@ static void cpm_uart_int_rx(struct uart_port *port) } #endif error_return: - tty_insert_flip_char(tty, ch, flg); + tty_insert_flip_char(tport, ch, flg); } /* End while (i--) */ diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 35ee6a2c6877..d12306625458 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -1760,8 +1760,7 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl info->icount.rx++; } else { - struct tty_struct *tty = info->port.tty; - tty_insert_flip_char(tty, data, flag); + tty_insert_flip_char(&info->port, data, flag); info->icount.rx++; } @@ -2338,8 +2337,7 @@ more_data: data_in, data_read); char flag = TTY_NORMAL; if (info->errorcode == ERRCODE_INSERT_BREAK) { - struct tty_struct *tty = info->port.tty; - tty_insert_flip_char(tty, 0, flag); + tty_insert_flip_char(&info->port, 0, flag); info->icount.rx++; } @@ -2353,7 +2351,7 @@ more_data: info->icount.frame++; flag = TTY_FRAME; } - tty_insert_flip_char(tty, data, flag); + tty_insert_flip_char(&info->port, data, flag); info->errorcode = 0; } info->break_detected_cnt = 0; @@ -2369,7 +2367,7 @@ more_data: log_int(rdpc(), 0, 0); } ); - tty_insert_flip_char(tty, + tty_insert_flip_char(&info->port, IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), TTY_NORMAL); } else { diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index a8cbb2670521..bdf67b0cb8b6 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -194,8 +194,7 @@ static void efm32_uart_break_ctl(struct uart_port *port, int ctl) /* not possible without fiddling with gpios */ } -static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port, - struct tty_struct *tty) +static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port) { struct uart_port *port = &efm_port->port; @@ -237,8 +236,8 @@ static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port, rxdata & UARTn_RXDATAX_RXDATA__MASK)) continue; - if (tty && (rxdata & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, + if ((rxdata & port->ignore_status_mask) == 0) + tty_insert_flip_char(&port->state->port, rxdata & UARTn_RXDATAX_RXDATA__MASK, flag); } } @@ -249,15 +248,16 @@ static irqreturn_t efm32_uart_rxirq(int irq, void *data) u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); int handled = IRQ_NONE; struct uart_port *port = &efm_port->port; + struct tty_port *tport = &port->state->port; struct tty_struct *tty; spin_lock(&port->lock); - tty = tty_kref_get(port->state->port.tty); + tty = tty_kref_get(tport->tty); if (irqflag & UARTn_IF_RXDATAV) { efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC); - efm32_uart_rx_chars(efm_port, tty); + efm32_uart_rx_chars(efm_port); handled = IRQ_HANDLED; } @@ -265,8 +265,7 @@ static irqreturn_t efm32_uart_rxirq(int irq, void *data) if (irqflag & UARTn_IF_RXOF) { efm32_uart_write32(efm_port, UARTn_IF_RXOF, UARTn_IFC); port->icount.overrun++; - if (tty) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); handled = IRQ_HANDLED; } diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 72b6334bcf1a..2b0b60ff7f01 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -734,7 +734,8 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) { short int count, rcv_buff; - struct tty_struct *tty = icom_port->uart_port.state->port.tty; + struct tty_port *port = &icom_port->uart_port.state->port; + struct tty_struct *tty = port->tty; unsigned short int status; struct uart_icount *icount; unsigned long offset; @@ -812,7 +813,7 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) } - tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag); + tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag); if (status & SA_FLAGS_OVERRUN) /* @@ -820,7 +821,7 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) * reported immediately, and doesn't * affect the current character */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); ignore_char: icom_port->statStg->rcv[rcv_buff].flags = 0; icom_port->statStg->rcv[rcv_buff].leLength = 0; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 1a2488495f69..f60c4028b6e1 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -517,6 +517,8 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) struct imx_port *sport = dev_id; unsigned int rx, flg, ignored = 0; struct tty_struct *tty = sport->port.state->port.tty; + struct tty_port *port = &sport->port.state->port; + struct tty_struct *tty = port->tty; unsigned long flags, temp; spin_lock_irqsave(&sport->port.lock, flags); @@ -569,7 +571,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) #endif } - tty_insert_flip_char(tty, rx, flg); + tty_insert_flip_char(port, rx, flg); } out: diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index 3969e54744cc..ac1d36cb2032 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -631,13 +631,13 @@ void jsm_input(struct jsm_channel *ch) * format it likes. */ if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK); + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_BREAK); else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY); + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_PARITY); else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME); + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_FRAME); else - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL); + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_NORMAL); } } else { tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ; diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 6ac2b797a764..ba2ef627d9c6 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -216,7 +216,7 @@ static void kgdb_nmi_tty_receiver(unsigned long data) return; while (kfifo_out(&priv->fifo, &ch, 1)) - tty_insert_flip_char(priv->port.tty, ch, TTY_NORMAL); + tty_insert_flip_char(&priv->port, ch, TTY_NORMAL); tty_flip_buffer_push(priv->port.tty); tty_kref_put(tty); diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 02da071fe1e7..1933fe3c98dd 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -162,7 +162,8 @@ lqasc_enable_ms(struct uart_port *port) static int lqasc_rx_chars(struct uart_port *port) { - struct tty_struct *tty = tty_port_tty_get(&port->state->port); + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tty_port_tty_get(tport); unsigned int ch = 0, rsr = 0, fifocnt; if (!tty) { @@ -208,7 +209,7 @@ lqasc_rx_chars(struct uart_port *port) } if ((rsr & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tport, ch, flag); if (rsr & ASCSTATE_ROE) /* @@ -216,7 +217,7 @@ lqasc_rx_chars(struct uart_port *port) * immediately, and doesn't affect the current * character */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); } if (ch != 0) tty_flip_buffer_push(tty); diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 0e86bff3fe2a..5cd180564c03 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -257,8 +257,9 @@ static void __serial_uart_flush(struct uart_port *port) static void __serial_lpc32xx_rx(struct uart_port *port) { + struct tty_port *tport = &port->state->port; unsigned int tmp, flag; - struct tty_struct *tty = tty_port_tty_get(&port->state->port); + struct tty_struct *tty = tty_port_tty_get(tport); if (!tty) { /* Discard data: no tty available */ @@ -281,10 +282,10 @@ static void __serial_lpc32xx_rx(struct uart_port *port) LPC32XX_HSUART_IIR(port->membase)); port->icount.frame++; flag = TTY_FRAME; - tty_insert_flip_char(tty, 0, TTY_FRAME); + tty_insert_flip_char(tport, 0, TTY_FRAME); } - tty_insert_flip_char(tty, (tmp & 0xFF), flag); + tty_insert_flip_char(tport, (tmp & 0xFF), flag); tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); } @@ -332,7 +333,8 @@ exit_tx: static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id) { struct uart_port *port = dev_id; - struct tty_struct *tty = tty_port_tty_get(&port->state->port); + struct tty_port *port = &port->state->port; + struct tty_struct *tty = tty_port_tty_get(tport); u32 status; spin_lock(&port->lock); @@ -356,8 +358,8 @@ static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id) writel(LPC32XX_HSU_RX_OE_INT, LPC32XX_HSUART_IIR(port->membase)); port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); if (tty) { - tty_insert_flip_char(tty, 0, TTY_OVERRUN); tty_schedule_flip(tty); } } diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index b13949ad3408..2e9a390f2ac4 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -300,7 +300,8 @@ static void m32r_sio_enable_ms(struct uart_port *port) static void receive_chars(struct uart_sio_port *up, int *status) { - struct tty_struct *tty = up->port.state->port.tty; + struct tty_port *port = &up->port.state->port; + struct tty_struct *tty = tport->tty; unsigned char ch; unsigned char flag; int max_count = 256; @@ -355,7 +356,7 @@ static void receive_chars(struct uart_sio_port *up, int *status) if (uart_handle_sysrq_char(&up->port, ch)) goto ignore_char; if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(port, ch, flag); if (*status & UART_LSR_OE) { /* @@ -363,7 +364,7 @@ static void receive_chars(struct uart_sio_port *up, int *status) * immediately, and doesn't affect the current * character. */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); } ignore_char: *status = serial_in(up, UART_LSR); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 7c23c4f4c58d..0145aeb7721c 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -941,7 +941,8 @@ static struct uart_ops mpc52xx_uart_ops = { static inline int mpc52xx_uart_int_rx_chars(struct uart_port *port) { - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tport->tty; unsigned char ch, flag; unsigned short status; @@ -986,14 +987,14 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); } - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tport, ch, flag); if (status & MPC52xx_PSC_SR_OE) { /* * Overrun is special, since it's * reported immediately, and doesn't * affect the current character */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); port->icount.overrun++; } } diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index 50366863cfa3..4bcbc66c48c4 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -1040,10 +1040,10 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi) | SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && !(cmdstat & pi->port.ignore_status_mask)) { - tty_insert_flip_char(tty, *bp, flag); + tty_insert_flip_char(port, *bp, flag); } else { for (i=0; iport.icount.rx += bytes_in; } diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 95fd39be2934..e4eb81a12793 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -91,14 +91,15 @@ static void msm_enable_ms(struct uart_port *port) static void handle_rx_dm(struct uart_port *port, unsigned int misr) { - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tport->tty; unsigned int sr; int count = 0; struct msm_port *msm_port = UART_TO_MSM(port); if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); } @@ -146,7 +147,8 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr) static void handle_rx(struct uart_port *port) { - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tport->tty; unsigned int sr; /* @@ -155,7 +157,7 @@ static void handle_rx(struct uart_port *port) */ if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); } @@ -186,7 +188,7 @@ static void handle_rx(struct uart_port *port) } if (!uart_handle_sysrq_char(port, c)) - tty_insert_flip_char(tty, c, flag); + tty_insert_flip_char(tport, c, flag); } tty_flip_buffer_push(tty); diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 1fa92284ade0..6aa9d470ef54 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -908,6 +908,7 @@ static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, unsigned long flags; unsigned int flush; struct tty_struct *tty; + struct tty_port *port; struct uart_port *uport; struct msm_hs_port *msm_uport; @@ -917,7 +918,8 @@ static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, spin_lock_irqsave(&uport->lock, flags); clk_enable(msm_uport->clk); - tty = uport->state->port.tty; + port = &uport->state->port; + tty = port->tty; msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); @@ -926,7 +928,7 @@ static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, /* overflow is not connect to data in a FIFO */ if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) && (uport->read_status_mask & CREAD))) { - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); uport->icount.buf_overrun++; error_f = 1; } @@ -939,7 +941,7 @@ static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, uport->icount.parity++; error_f = 1; if (uport->ignore_status_mask & IGNPAR) - tty_insert_flip_char(tty, 0, TTY_PARITY); + tty_insert_flip_char(port, 0, TTY_PARITY); } if (error_f) @@ -1344,7 +1346,6 @@ static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev) unsigned long flags; struct msm_hs_port *msm_uport = dev; struct uart_port *uport = &msm_uport->uport; - struct tty_struct *tty = NULL; spin_lock_irqsave(&uport->lock, flags); if (msm_uport->clk_state == MSM_HS_CLK_OFF) { @@ -1361,8 +1362,7 @@ static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev) * optionally inject char into tty rx */ msm_hs_request_clock_on_locked(uport); if (msm_uport->rx_wakeup.inject_rx) { - tty = uport->state->port.tty; - tty_insert_flip_char(tty, + tty_insert_flip_char(&uport->state->port, msm_uport->rx_wakeup.rx_to_inject, TTY_NORMAL); queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index e2775b6df5a5..83b21686020e 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -242,8 +242,9 @@ static void mux_write(struct uart_port *port) */ static void mux_read(struct uart_port *port) { + struct tty_port *tport = &port->state->port; int data; - struct tty_struct *tty = port->state->port.tty; + struct tty_struct *tty = tport->tty; __u32 start_count = port->icount.rx; while(1) { @@ -266,7 +267,7 @@ static void mux_read(struct uart_port *port) if (uart_handle_sysrq_char(port, data & 0xffu)) continue; - tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL); + tty_insert_flip_char(tport, data & 0xFF, TTY_NORMAL); } if (start_count != port->icount.rx) { diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c index dd4c31d1aee5..10d64a3697fb 100644 --- a/drivers/tty/serial/nwpserial.c +++ b/drivers/tty/serial/nwpserial.c @@ -128,7 +128,8 @@ static void nwpserial_config_port(struct uart_port *port, int flags) static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) { struct nwpserial_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; + struct tty_port *port = &up->port.state->port; + struct tty_struct *tty = port->tty; irqreturn_t ret; unsigned int iir; unsigned char ch; @@ -146,7 +147,7 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) up->port.icount.rx++; ch = dcr_read(up->dcr_host, UART_RX); if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) - tty_insert_flip_char(tty, ch, TTY_NORMAL); + tty_insert_flip_char(port, ch, TTY_NORMAL); } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); tty_flip_buffer_push(tty); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 333c8d012b0e..73a3f295e7c4 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -229,6 +229,7 @@ static void pmz_interrupt_control(struct uart_pmac_port *uap, int enable) static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) { + struct tty_port *port; struct tty_struct *tty = NULL; unsigned char ch, r1, drop, error, flag; int loops = 0; @@ -239,7 +240,8 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) (void)read_zsdata(uap); return NULL; } - tty = uap->port.state->port.tty; + port = &uap->port.state->port; + tty = port->tty; /* TOCTOU above */ while (1) { error = 0; @@ -309,10 +311,10 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) if (uap->port.ignore_status_mask == 0xff || (r1 & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(port, ch, flag); } if (r1 & Rx_OVR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); next_char: /* We can get stuck in an infinite loop getting char 0 when the * line is in a wrong HW state, we break that here. diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c index aced1dd923d8..0cd0e4ac12a6 100644 --- a/drivers/tty/serial/sc26xx.c +++ b/drivers/tty/serial/sc26xx.c @@ -138,14 +138,18 @@ static void sc26xx_disable_irq(struct uart_port *port, int mask) static struct tty_struct *receive_chars(struct uart_port *port) { + struct tty_port *tport = NULL; struct tty_struct *tty = NULL; int limit = 10000; unsigned char ch; char flag; u8 status; - if (port->state != NULL) /* Unopened serial console */ - tty = port->state->port.tty; + /* FIXME what is this trying to achieve? */ + if (port->state != NULL) { /* Unopened serial console */ + tport = &port->state->port; + tty = tport->tty; + } while (limit-- > 0) { status = READ_SC_PORT(port, SR); @@ -185,7 +189,7 @@ static struct tty_struct *receive_chars(struct uart_port *port) if (status & port->ignore_status_mask) continue; - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tport, ch, flag); } return tty; } diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index ba7863bbbb4d..675343a20f24 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2792,10 +2792,10 @@ EXPORT_SYMBOL_GPL(uart_handle_cts_change); void uart_insert_char(struct uart_port *port, unsigned int status, unsigned int overrun, unsigned int ch, unsigned int flag) { - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; if ((status & port->ignore_status_mask & ~overrun) == 0) - if (tty_insert_flip_char(tty, ch, flag) == 0) + if (tty_insert_flip_char(tport, ch, flag) == 0) ++port->icount.buf_overrun; /* @@ -2803,7 +2803,7 @@ void uart_insert_char(struct uart_port *port, unsigned int status, * it doesn't affect the current character. */ if (status & ~port->ignore_status_mask & overrun) - if (tty_insert_flip_char(tty, 0, TTY_OVERRUN) == 0) + if (tty_insert_flip_char(tport, 0, TTY_OVERRUN) == 0) ++port->icount.buf_overrun; } EXPORT_SYMBOL_GPL(uart_insert_char); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index cf96314770fb..ecef748f5385 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -620,7 +620,7 @@ static void sci_receive_chars(struct uart_port *port) sci_port->break_flag) count = 0; else - tty_insert_flip_char(tty, c, TTY_NORMAL); + tty_insert_flip_char(tport, c, TTY_NORMAL); } else { for (i = 0; i < count; i++) { char c = serial_port_in(port, SCxRDR); @@ -662,7 +662,7 @@ static void sci_receive_chars(struct uart_port *port) } else flag = TTY_NORMAL; - tty_insert_flip_char(tty, c, flag); + tty_insert_flip_char(tport, c, flag); } } @@ -721,7 +721,8 @@ static int sci_handle_errors(struct uart_port *port) { int copied = 0; unsigned short status = serial_port_in(port, SCxSR); - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tport->tty; struct sci_port *s = to_sci_port(port); /* @@ -732,7 +733,7 @@ static int sci_handle_errors(struct uart_port *port) port->icount.overrun++; /* overrun error */ - if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) + if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) copied++; dev_notice(port->dev, "overrun error"); @@ -756,7 +757,7 @@ static int sci_handle_errors(struct uart_port *port) dev_dbg(port->dev, "BREAK detected\n"); - if (tty_insert_flip_char(tty, 0, TTY_BREAK)) + if (tty_insert_flip_char(tport, 0, TTY_BREAK)) copied++; } @@ -764,7 +765,7 @@ static int sci_handle_errors(struct uart_port *port) /* frame error */ port->icount.frame++; - if (tty_insert_flip_char(tty, 0, TTY_FRAME)) + if (tty_insert_flip_char(tport, 0, TTY_FRAME)) copied++; dev_notice(port->dev, "frame error\n"); @@ -775,7 +776,7 @@ static int sci_handle_errors(struct uart_port *port) /* parity error */ port->icount.parity++; - if (tty_insert_flip_char(tty, 0, TTY_PARITY)) + if (tty_insert_flip_char(tport, 0, TTY_PARITY)) copied++; dev_notice(port->dev, "parity error"); @@ -789,7 +790,8 @@ static int sci_handle_errors(struct uart_port *port) static int sci_handle_fifo_overrun(struct uart_port *port) { - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tport->tty; struct sci_port *s = to_sci_port(port); struct plat_sci_reg *reg; int copied = 0; @@ -803,7 +805,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port) port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); tty_flip_buffer_push(tty); dev_notice(port->dev, "overrun error\n"); @@ -817,7 +819,8 @@ static int sci_handle_breaks(struct uart_port *port) { int copied = 0; unsigned short status = serial_port_in(port, SCxSR); - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tport->tty; struct sci_port *s = to_sci_port(port); if (uart_handle_break(port)) @@ -832,7 +835,7 @@ static int sci_handle_breaks(struct uart_port *port) port->icount.brk++; /* Notify of BREAK */ - if (tty_insert_flip_char(tty, 0, TTY_BREAK)) + if (tty_insert_flip_char(tport, 0, TTY_BREAK)) copied++; dev_dbg(port->dev, "BREAK detected\n"); @@ -1260,8 +1263,7 @@ static void sci_dma_tx_complete(void *arg) } /* Locking: called with port lock held */ -static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, - size_t count) +static int sci_dma_rx_push(struct sci_port *s, size_t count) { struct uart_port *port = &s->port; struct tty_port *tport = &port->state->port; @@ -1285,7 +1287,7 @@ static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, return room; for (i = 0; i < room; i++) - tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], + tty_insert_flip_char(tport, ((u8 *)sg_virt(&s->sg_rx[active]))[i], TTY_NORMAL); port->icount.rx += room; @@ -1305,7 +1307,7 @@ static void sci_dma_rx_complete(void *arg) spin_lock_irqsave(&port->lock, flags); - count = sci_dma_rx_push(s, tty, s->buf_len_rx); + count = sci_dma_rx_push(s, s->buf_len_rx); mod_timer(&s->rx_timer, jiffies + s->rx_timeout); @@ -1418,7 +1420,7 @@ static void work_fn_rx(struct work_struct *work) sh_desc->partial, sh_desc->cookie); spin_lock_irqsave(&port->lock, flags); - count = sci_dma_rx_push(s, tty, sh_desc->partial); + count = sci_dma_rx_push(s, sh_desc->partial); spin_unlock_irqrestore(&port->lock, flags); if (count) diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c index 1c6de9f58699..283232c64656 100644 --- a/drivers/tty/serial/sn_console.c +++ b/drivers/tty/serial/sn_console.c @@ -457,6 +457,7 @@ static int sn_debug_printf(const char *fmt, ...) static void sn_receive_chars(struct sn_cons_port *port, unsigned long flags) { + struct tty_port *tport = NULL; int ch; struct tty_struct *tty; @@ -472,7 +473,8 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags) if (port->sc_port.state) { /* The serial_core stuffs are initialized, use them */ - tty = port->sc_port.state->port.tty; + tport = &port->sc_port.state->port; + tty = tport->tty; } else { /* Not registered yet - can't pass to tty layer. */ @@ -517,7 +519,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags) /* record the character to pass up to the tty layer */ if (tty) { - if(tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0) + if (tty_insert_flip_char(tport, ch, TTY_NORMAL) == 0) break; } port->sc_port.icount.rx++; diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index b9bf9c53f7fd..bbb102e3c035 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -99,7 +99,7 @@ static int receive_chars_getchar(struct uart_port *port, struct tty_struct *tty) uart_handle_dcd_change(port, 1); } - if (tty == NULL) { + if (port->state == NULL) { uart_handle_sysrq_char(port, c); continue; } @@ -109,7 +109,7 @@ static int receive_chars_getchar(struct uart_port *port, struct tty_struct *tty) if (uart_handle_sysrq_char(port, c)) continue; - tty_insert_flip_char(tty, c, TTY_NORMAL); + tty_insert_flip_char(&port->state->port, c, TTY_NORMAL); } return saw_console_brk; diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index bd8b3b634103..4abc4d43a8e8 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -111,6 +111,7 @@ static struct tty_struct * receive_chars(struct uart_sunsab_port *up, union sab82532_irq_status *stat) { + struct tty_port *port = NULL; struct tty_struct *tty = NULL; unsigned char buf[32]; int saw_console_brk = 0; @@ -118,8 +119,10 @@ receive_chars(struct uart_sunsab_port *up, int count = 0; int i; - if (up->port.state != NULL) /* Unopened serial console */ - tty = up->port.state->port.tty; + if (up->port.state != NULL) { /* Unopened serial console */ + port = &up->port.state->port; + tty = port->tty; + } /* Read number of BYTES (Character + Status) available. */ if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { @@ -160,11 +163,6 @@ receive_chars(struct uart_sunsab_port *up, for (i = 0; i < count; i++) { unsigned char ch = buf[i], flag; - if (tty == NULL) { - uart_handle_sysrq_char(&up->port, ch); - continue; - } - flag = TTY_NORMAL; up->port.icount.rx++; @@ -213,9 +211,9 @@ receive_chars(struct uart_sunsab_port *up, if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(port, ch, flag); if (stat->sreg.isr0 & SAB82532_ISR0_RFO) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); } if (saw_console_brk) diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 220da3f9724f..52325968b06c 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -318,7 +318,8 @@ static void sunsu_enable_ms(struct uart_port *port) static struct tty_struct * receive_chars(struct uart_sunsu_port *up, unsigned char *status) { - struct tty_struct *tty = up->port.state->port.tty; + struct tty_port *port = &up->port.state->port; + struct tty_struct *tty = port->tty; unsigned char ch, flag; int max_count = 256; int saw_console_brk = 0; @@ -376,14 +377,14 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status) if (uart_handle_sysrq_char(&up->port, ch)) goto ignore_char; if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(port, ch, flag); if (*status & UART_LSR_OE) /* * Overrun is special, since it's reported * immediately, and doesn't affect the current * character. */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); ignore_char: *status = serial_inp(up, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index aef4fab957c3..4a11be3849f6 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -327,13 +327,15 @@ static struct tty_struct * sunzilog_receive_chars(struct uart_sunzilog_port *up, struct zilog_channel __iomem *channel) { + struct tty_port *port = NULL; struct tty_struct *tty; unsigned char ch, r1, flag; tty = NULL; - if (up->port.state != NULL && /* Unopened serial console */ - up->port.state->port.tty != NULL) /* Keyboard || mouse */ - tty = up->port.state->port.tty; + if (up->port.state != NULL) { /* Unopened serial console */ + port = &up->port.state->port; + tty = port->tty; /* mouse => tty is NULL */ + } for (;;) { @@ -366,11 +368,6 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up, continue; } - if (tty == NULL) { - uart_handle_sysrq_char(&up->port, ch); - continue; - } - /* A real serial line, record the character and status. */ flag = TTY_NORMAL; up->port.icount.rx++; @@ -400,10 +397,10 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up, if (up->port.ignore_status_mask == 0xff || (r1 & up->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(port, ch, flag); } if (r1 & Rx_OVR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(port, 0, TTY_OVERRUN); } return tty; diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 5be0d68feceb..f40c634f7528 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -91,12 +91,12 @@ static void timbuart_flush_buffer(struct uart_port *port) static void timbuart_rx_chars(struct uart_port *port) { - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); port->icount.rx++; - tty_insert_flip_char(tty, ch, TTY_NORMAL); + tty_insert_flip_char(tport, ch, TTY_NORMAL); } spin_unlock(&port->lock); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 89eee43c4e2d..5caf1f0ebc82 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -66,7 +66,7 @@ static struct uart_port ulite_ports[ULITE_NR_UARTS]; static int ulite_receive(struct uart_port *port, int stat) { - struct tty_struct *tty = port->state->port.tty; + struct tty_port *tport = &port->state->port; unsigned char ch = 0; char flag = TTY_NORMAL; @@ -103,13 +103,13 @@ static int ulite_receive(struct uart_port *port, int stat) stat &= ~port->ignore_status_mask; if (stat & ULITE_STATUS_RXVALID) - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tport, ch, flag); if (stat & ULITE_STATUS_FRAME) - tty_insert_flip_char(tty, 0, TTY_FRAME); + tty_insert_flip_char(tport, 0, TTY_FRAME); if (stat & ULITE_STATUS_OVERRUN) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); return 1; } diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index ed047d9ab1e2..7a2378627fa5 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -513,7 +513,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port) continue; error_return: - tty_insert_flip_char(tty, ch, flg); + tty_insert_flip_char(tport, ch, flg); } @@ -561,7 +561,7 @@ handle_error: /* Overrun does not affect the current character ! */ if (status & BD_SC_OV) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); #ifdef SUPPORT_SYSRQ port->sysrq = 0; #endif diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 8fd181436a6b..7f4112423f3d 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -136,7 +136,8 @@ static void vt8500_enable_ms(struct uart_port *port) static void handle_rx(struct uart_port *port) { - struct tty_struct *tty = tty_port_tty_get(&port->state->port); + struct tty_port *tport = &port->state->port; + struct tty_struct *tty = tty_port_tty_get(tport); if (!tty) { /* Discard data: no tty available */ int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8; @@ -151,7 +152,7 @@ static void handle_rx(struct uart_port *port) */ if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(tport, 0, TTY_OVERRUN); } /* and now the main RX loop */ @@ -174,7 +175,7 @@ static void handle_rx(struct uart_port *port) port->icount.rx++; if (!uart_handle_sysrq_char(port, c)) - tty_insert_flip_char(tty, c, flag); + tty_insert_flip_char(tport, c, flag); } tty_flip_buffer_push(tty); diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index d42b66195a49..33656b35db05 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -1507,13 +1507,13 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info ) else if (status & RXSTATUS_FRAMING_ERROR) flag = TTY_FRAME; } /* end of if (error) */ - tty_insert_flip_char(tty, DataByte, flag); + tty_insert_flip_char(&info->port, DataByte, flag); if (status & RXSTATUS_OVERRUN) { /* Overrun is special, since it's * reported immediately, and doesn't * affect the current character */ - work += tty_insert_flip_char(tty, 0, TTY_OVERRUN); + work += tty_insert_flip_char(&info->port, 0, TTY_OVERRUN); } } diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 62a0db7ead07..473d7406db83 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -1893,10 +1893,8 @@ static void rx_async(struct slgt_info *info) else if (status & BIT0) stat = TTY_FRAME; } - if (tty) { - tty_insert_flip_char(tty, ch, stat); - chars++; - } + tty_insert_flip_char(&info->port, ch, stat); + chars++; } if (i < count) { @@ -2182,7 +2180,7 @@ static void isr_serial(struct slgt_info *info) if (info->port.tty) { if (!(status & info->ignore_status_mask)) { if (info->read_status_mask & MASK_BREAK) { - tty_insert_flip_char(info->port.tty, 0, TTY_BREAK); + tty_insert_flip_char(&info->port, 0, TTY_BREAK); if (info->port.flags & ASYNC_SAK) do_SAK(info->port.tty); } diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 33b7314cc6c7..f5794f3d840f 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -2131,13 +2131,11 @@ static void isr_rxint(SLMP_INFO * info) /* process break detection if tty control * is not set to ignore it */ - if ( tty ) { - if (!(status & info->ignore_status_mask1)) { - if (info->read_status_mask1 & BRKD) { - tty_insert_flip_char(tty, 0, TTY_BREAK); - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } + if (!(status & info->ignore_status_mask1)) { + if (info->read_status_mask1 & BRKD) { + tty_insert_flip_char(&info->port, 0, TTY_BREAK); + if (tty && (info->port.flags & ASYNC_SAK)) + do_SAK(tty); } } } @@ -2202,26 +2200,22 @@ static void isr_rxrdy(SLMP_INFO * info) status &= info->read_status_mask2; - if ( tty ) { - if (status & PE) - flag = TTY_PARITY; - else if (status & FRME) - flag = TTY_FRAME; - if (status & OVRN) { - /* Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - over = true; - } + if (status & PE) + flag = TTY_PARITY; + else if (status & FRME) + flag = TTY_FRAME; + if (status & OVRN) { + /* Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + over = true; } } /* end of if (error) */ - if ( tty ) { - tty_insert_flip_char(tty, DataByte, flag); - if (over) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + tty_insert_flip_char(&info->port, DataByte, flag); + if (over) + tty_insert_flip_char(&info->port, 0, TTY_OVERRUN); } if ( debug_level >= DEBUG_LEVEL_ISR ) { diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 681765baef69..5aace4d47cb6 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -309,8 +309,8 @@ static void put_queue(struct vc_data *vc, int ch) { struct tty_struct *tty = vc->port.tty; + tty_insert_flip_char(&vc->port, ch, 0); if (tty) { - tty_insert_flip_char(tty, ch, 0); tty_schedule_flip(tty); } } @@ -323,7 +323,7 @@ static void puts_queue(struct vc_data *vc, char *cp) return; while (*cp) { - tty_insert_flip_char(tty, *cp, 0); + tty_insert_flip_char(&vc->port, *cp, 0); cp++; } tty_schedule_flip(tty); @@ -586,7 +586,7 @@ static void fn_send_intr(struct vc_data *vc) if (!tty) return; - tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_insert_flip_char(&vc->port, 0, TTY_BREAK); tty_schedule_flip(tty); } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 8fd89687d068..811f2505e9ee 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1336,7 +1336,7 @@ static void csi_m(struct vc_data *vc) static void respond_string(const char *p, struct tty_struct *tty) { while (*p) { - tty_insert_flip_char(tty, *p, 0); + tty_insert_flip_char(tty->port, *p, 0); p++; } tty_schedule_flip(tty); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index e2d653d00ea2..1614feb6a76e 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -703,7 +703,7 @@ static void ark3116_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (lsr & UART_LSR_OE) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index a213d1be9462..7ba2c0bdcec9 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -276,7 +276,7 @@ static void belkin_sa_process_read_urb(struct urb *urb) /* Overrun is special, not associated with a char. */ if (status & BELKIN_SA_LSR_OE) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index efbc4035410c..b5fa738512ca 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -1441,7 +1441,7 @@ static int digi_read_inb_callback(struct urb *urb) /* overrun is special, not associated with a char */ if (port_status & DIGI_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); /* break takes precedence over parity, */ /* which takes precedence over framing errors */ diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index a8c6430bf1b3..6b880c33d258 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -133,12 +133,13 @@ static void f81232_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); if (port->port.console && port->sysrq) { for (i = 0; i < urb->actual_length; ++i) if (!usb_serial_handle_sysrq_char(port, data[i])) - tty_insert_flip_char(tty, data[i], tty_flag); + tty_insert_flip_char(&port->port, data[i], + tty_flag); } else { tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0416d952a448..eb59ba3789ad 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1958,9 +1958,8 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE) -static int ftdi_process_packet(struct tty_struct *tty, - struct usb_serial_port *port, struct ftdi_private *priv, - char *packet, int len) +static int ftdi_process_packet(struct usb_serial_port *port, + struct ftdi_private *priv, char *packet, int len) { int i; char status; @@ -2010,7 +2009,7 @@ static int ftdi_process_packet(struct tty_struct *tty, /* Overrun is special, not associated with a char */ if (packet[1] & FTDI_RS_OE) { priv->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } @@ -2029,7 +2028,7 @@ static int ftdi_process_packet(struct tty_struct *tty, if (port->port.console && port->sysrq) { for (i = 0; i < len; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(tty, *ch, flag); + tty_insert_flip_char(&port->port, *ch, flag); } } else { tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); @@ -2054,7 +2053,7 @@ static void ftdi_process_read_urb(struct urb *urb) for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { len = min_t(int, urb->actual_length - i, priv->max_packet_size); - count += ftdi_process_packet(tty, port, priv, &data[i], len); + count += ftdi_process_packet(port, priv, &data[i], len); } if (count) diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 2ea70a631996..b00110cd5689 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -332,7 +332,7 @@ void usb_serial_generic_process_read_urb(struct urb *urb) else { for (i = 0; i < urb->actual_length; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(tty, *ch, TTY_NORMAL); + tty_insert_flip_char(&port->port, *ch, TTY_NORMAL); } } tty_flip_buffer_push(tty); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 97bc49f68efd..a4f5caebda43 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -315,7 +315,7 @@ static void usa26_indat_callback(struct urb *urb) else err = 0; for (i = 1; i < urb->actual_length ; ++i) - tty_insert_flip_char(tty, data[i], err); + tty_insert_flip_char(&port->port, data[i], err); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); @@ -328,7 +328,8 @@ static void usa26_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, data[i+1], flag); + tty_insert_flip_char(&port->port, data[i+1], + flag); } } tty_flip_buffer_push(tty); @@ -700,7 +701,8 @@ static void usa49_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, data[i+1], flag); + tty_insert_flip_char(&port->port, data[i+1], + flag); } } tty_flip_buffer_push(tty); @@ -751,7 +753,8 @@ static void usa49wg_indat_callback(struct urb *urb) /* no error on any byte */ i++; for (x = 1; x < len ; ++x) - tty_insert_flip_char(tty, data[i++], 0); + tty_insert_flip_char(&port->port, + data[i++], 0); } else { /* * some bytes had errors, every byte has status @@ -765,7 +768,7 @@ static void usa49wg_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, + tty_insert_flip_char(&port->port, data[i+1], flag); i += 2; } @@ -824,8 +827,8 @@ static void usa90_indat_callback(struct urb *urb) else err = 0; for (i = 1; i < urb->actual_length ; ++i) - tty_insert_flip_char(tty, data[i], - err); + tty_insert_flip_char(&port->port, + data[i], err); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); @@ -838,8 +841,8 @@ static void usa90_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, data[i+1], - flag); + tty_insert_flip_char(&port->port, + data[i+1], flag); } } } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 86789b0477c5..00047f3c7293 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -805,12 +805,13 @@ static void pl2303_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); if (port->port.console && port->sysrq) { for (i = 0; i < urb->actual_length; ++i) if (!usb_serial_handle_sysrq_char(port, data[i])) - tty_insert_flip_char(tty, data[i], tty_flag); + tty_insert_flip_char(&port->port, data[i], + tty_flag); } else { tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index fa42f1b907d0..04e373152724 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -498,7 +498,7 @@ static void spcp8x5_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); if (status & UART_DCD) usb_serial_handle_dcd_change(port, tty, diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 37476c6240c2..38713156e957 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -582,8 +582,7 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, } -static int ssu100_process_packet(struct urb *urb, - struct tty_struct *tty) +static int ssu100_process_packet(struct urb *urb) { struct usb_serial_port *port = urb->context; char *packet = (char *)urb->transfer_buffer; @@ -598,7 +597,8 @@ static int ssu100_process_packet(struct urb *urb, if (packet[2] == 0x00) { ssu100_update_lsr(port, packet[3], &flag); if (flag == TTY_OVERRUN) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); } if (packet[2] == 0x01) ssu100_update_msr(port, packet[3]); @@ -614,7 +614,7 @@ static int ssu100_process_packet(struct urb *urb, if (port->port.console && port->sysrq) { for (i = 0; i < len; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(tty, *ch, flag); + tty_insert_flip_char(&port->port, *ch, flag); } } else tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); @@ -632,7 +632,7 @@ static void ssu100_process_read_urb(struct urb *urb) if (!tty) return; - count = ssu100_process_packet(urb, tty); + count = ssu100_process_packet(urb); if (count) tty_flip_buffer_push(tty); diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index 743f1d076467..f9acb578c6ad 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -12,16 +12,16 @@ extern int tty_prepare_flip_string_flags(struct tty_port *port, unsigned char **chars, char **flags, size_t size); void tty_schedule_flip(struct tty_struct *tty); -static inline int tty_insert_flip_char(struct tty_struct *tty, +static inline int tty_insert_flip_char(struct tty_port *port, unsigned char ch, char flag) { - struct tty_buffer *tb = tty->port->buf.tail; + struct tty_buffer *tb = port->buf.tail; if (tb && tb->used < tb->size) { tb->flag_buf_ptr[tb->used] = flag; tb->char_buf_ptr[tb->used++] = ch; return 1; } - return tty_insert_flip_string_flags(tty->port, &ch, &flag, 1); + return tty_insert_flip_string_flags(port, &ch, &flag, 1); } static inline int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size) -- cgit v1.2.3 From d6c53c0e9bd0a83f9f9ddbc9fd80141a54d83896 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 3 Jan 2013 15:53:05 +0100 Subject: TTY: move low_latency to tty_port One point is to have less places where we actually need tty pointer. The other is that low_latency is bound to buffer processing and buffers are now in tty_port. So it makes sense to move low_latency to tty_port too. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- arch/ia64/hp/sim/simserial.c | 2 +- arch/mn10300/kernel/mn10300-serial.c | 6 +++--- drivers/char/pcmcia/synclink_cs.c | 2 +- drivers/isdn/gigaset/interface.c | 2 +- drivers/net/caif/caif_serial.c | 2 +- drivers/net/irda/irtty-sir.c | 2 +- drivers/s390/char/con3215.c | 2 +- drivers/s390/char/sclp_tty.c | 2 +- drivers/s390/char/sclp_vt220.c | 2 +- drivers/s390/char/tty3270.c | 4 ++-- drivers/tty/amiserial.c | 4 ++-- drivers/tty/ipwireless/tty.c | 2 +- drivers/tty/mxser.c | 2 +- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 2 +- drivers/tty/serial/crisv10.c | 4 ++-- drivers/tty/serial/ifx6x60.c | 2 +- drivers/tty/serial/ioc3_serial.c | 2 +- drivers/tty/serial/ioc4_serial.c | 2 +- drivers/tty/serial/max3100.c | 2 +- drivers/tty/serial/mpsc.c | 2 +- drivers/tty/serial/mrst_max3110.c | 2 +- drivers/tty/serial/msm_serial_hs.c | 2 +- drivers/tty/serial/serial_core.c | 7 +++---- drivers/tty/synclink.c | 2 +- drivers/tty/synclink_gt.c | 2 +- drivers/tty/synclinkmp.c | 2 +- drivers/tty/tty_buffer.c | 9 +++++---- include/linux/tty.h | 5 +++-- net/irda/ircomm/ircomm_tty.c | 2 +- 29 files changed, 42 insertions(+), 41 deletions(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index f8ae5d8eb106..942022a5bc86 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -436,7 +436,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp) struct tty_port *port = &info->port; tty->driver_data = info; - tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; /* * figure out which console to use (should be one already) diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index 54ef40ceaaed..ae61bd692b4b 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -537,7 +537,7 @@ static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port) count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE); count = tty_buffer_request_room(port, count); if (count == 0) { - if (!tty->low_latency) + if (!port->low_latency) tty_flip_buffer_push(tty); return; } @@ -546,7 +546,7 @@ try_again: /* pull chars out of the hat */ ix = ACCESS_ONCE(port->rx_outp); if (CIRC_CNT(port->rx_inp, ix, MNSC_BUFFER_SIZE) == 0) { - if (push && !tty->low_latency) + if (push && !port->low_latency) tty_flip_buffer_push(tty); return; } @@ -678,7 +678,7 @@ insert: count--; if (count <= 0) { - if (!tty->low_latency) + if (!port->low_latency) tty_flip_buffer_push(tty); return; } diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 9bdfe27b2413..92dc7327c7aa 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2522,7 +2522,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) goto cleanup; } - tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index dd2a57eca2e7..6dcecd40a819 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -164,7 +164,7 @@ static int if_open(struct tty_struct *tty, struct file *filp) if (cs->port.count == 1) { tty_port_tty_set(&cs->port, tty); - tty->low_latency = 1; + cs->port.low_latency = 1; } mutex_unlock(&cs->mutex); diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index 5de74e762021..666891a9a248 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -91,7 +91,7 @@ static inline void update_tty_status(struct ser_device *ser) ser->tty->hw_stopped << 4 | ser->tty->flow_stopped << 3 | ser->tty->packet << 2 | - ser->tty->low_latency << 1 | + ser->tty->port->low_latency << 1 | ser->tty->warned; } static inline void debugfs_init(struct ser_device *ser, struct tty_struct *tty) diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 6e4d4b62c9a8..a41267197839 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -210,7 +210,7 @@ static int irtty_do_write(struct sir_dev *dev, const unsigned char *ptr, size_t * been received, which can now be decapsulated and delivered for * further processing * - * calling context depends on underlying driver and tty->low_latency! + * calling context depends on underlying driver and tty->port->low_latency! * for example (low_latency: 1 / 0): * serial.c: uart-interrupt / softint * usbserial: urb-complete-interrupt / softint diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 4c6743dd5357..41b75c5ae0d5 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -968,7 +968,7 @@ static int tty3215_open(struct tty_struct *tty, struct file * filp) tty_port_tty_set(&raw->port, tty); - tty->low_latency = 0; /* don't use bottom half for pushing chars */ + raw->port.low_latency = 0; /* don't use bottom half for pushing chars */ /* * Start up 3215 device */ diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index 3ffddbb53d2f..19b7c516c07d 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -65,7 +65,7 @@ sclp_tty_open(struct tty_struct *tty, struct file *filp) { tty_port_tty_set(&sclp_port, tty); tty->driver_data = NULL; - tty->low_latency = 0; + sclp_port.low_latency = 0; return 0; } diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index b5507f199b24..0eca99b98712 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -495,7 +495,7 @@ sclp_vt220_open(struct tty_struct *tty, struct file *filp) { if (tty->count == 1) { tty_port_tty_set(&sclp_vt220_port, tty); - tty->low_latency = 0; + sclp_vt220_port.low_latency = 0; if (!tty->winsize.ws_row && !tty->winsize.ws_col) { tty->winsize.ws_row = 24; tty->winsize.ws_col = 80; diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index 43ea0593bdb0..3860e796b65f 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -860,7 +860,7 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty) tty->driver_data = tp; tty->winsize.ws_row = tp->view.rows - 2; tty->winsize.ws_col = tp->view.cols; - tty->low_latency = 0; + tp->port.low_latency = 0; /* why to reassign? */ tty_port_tty_set(&tp->port, tty); tp->inattr = TF_INPUT; @@ -893,7 +893,7 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty) } tty_port_tty_set(&tp->port, tty); - tty->low_latency = 0; + tp->port.low_latency = 0; tty->winsize.ws_row = tp->view.rows - 2; tty->winsize.ws_col = tp->view.cols; diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 2e670d0c5366..2d1357acbc23 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1099,7 +1099,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, state->custom_divisor = new_serial.custom_divisor; port->close_delay = new_serial.close_delay * HZ/100; port->closing_wait = new_serial.closing_wait * HZ/100; - tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; check_and_exit: if (port->flags & ASYNC_INITIALIZED) { @@ -1528,7 +1528,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp) if (serial_paranoia_check(info, tty->name, "rs_open")) return -ENODEV; - tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; retval = startup(tty, info); if (retval) { diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index a3ad5e14cbef..c43da7445432 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -106,7 +106,7 @@ static int ipw_open(struct tty_struct *linux_tty, struct file *filp) tty->port.tty = linux_tty; linux_tty->driver_data = tty; - linux_tty->low_latency = 1; + tty->port.low_latency = 1; if (tty->tty_type == TTYTYPE_MODEM) ipwireless_ppp_open(tty->network); diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 450c4507cb5b..e9cdfdfe06e9 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1264,7 +1264,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, (new_serial.flags & ASYNC_FLAGS)); port->close_delay = new_serial.close_delay * HZ / 100; port->closing_wait = new_serial.closing_wait * HZ / 100; - tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (new_serial.baud_base != info->baud_base || new_serial.custom_divisor != diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 108122f8f3c2..0bb24378a3c0 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -508,7 +508,7 @@ static void cpm_uart_set_termios(struct uart_port *port, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); if (baud < HW_BUF_SPD_THRESHOLD || - (pinfo->port.state && pinfo->port.state->port.tty->low_latency)) + (pinfo->port.state && pinfo->port.state->port.low_latency)) pinfo->rx_fifosize = 1; else pinfo->rx_fifosize = RX_BUF_SIZE; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index c82601d4dc53..52449adc09ac 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3462,7 +3462,7 @@ set_serial_info(struct e100_serial *info, info->type = new_serial.type; info->close_delay = new_serial.close_delay; info->closing_wait = new_serial.closing_wait; - info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + info->port.low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; check_and_exit: if (info->flags & ASYNC_INITIALIZED) { @@ -4106,7 +4106,7 @@ rs_open(struct tty_struct *tty, struct file * filp) tty->driver_data = info; info->port.tty = tty; - tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY); + info->port.low_latency = !!(info->flags & ASYNC_LOW_LATENCY); /* * If the port is in the middle of closing, bail out now diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index bfb634ea8145..4bc6e47890b4 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -615,7 +615,7 @@ static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) tty->driver_data = ifx_dev; /* allows flip string push from int context */ - tty->low_latency = 1; + port->low_latency = 1; /* set flag to allows data transfer */ set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c index 0f25ce49c7f9..edbdc4e45075 100644 --- a/drivers/tty/serial/ioc3_serial.c +++ b/drivers/tty/serial/ioc3_serial.c @@ -1000,7 +1000,7 @@ ioc3_change_speed(struct uart_port *the_port, the_port->ignore_status_mask = N_ALL_INPUT; - state->port.tty->low_latency = 1; + state->port.low_latency = 1; if (iflag & IGNPAR) the_port->ignore_status_mask &= ~(N_PARITY_ERROR diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c index 3b021b03ae56..86f64ed89b45 100644 --- a/drivers/tty/serial/ioc4_serial.c +++ b/drivers/tty/serial/ioc4_serial.c @@ -1740,7 +1740,7 @@ ioc4_change_speed(struct uart_port *the_port, the_port->ignore_status_mask = N_ALL_INPUT; - state->port.tty->low_latency = 1; + state->port.low_latency = 1; if (iflag & IGNPAR) the_port->ignore_status_mask &= ~(N_PARITY_ERROR diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 7ce3197087bb..e238e80cd981 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -530,7 +530,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios, MAX3100_STATUS_OE; /* we are sending char from a workqueue so enable */ - s->port.state->port.tty->low_latency = 1; + s->port.state->port.low_latency = 1; if (s->poll_time > 0) del_timer_sync(&s->timer); diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index 4bcbc66c48c4..6f2d2ceb326a 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -970,7 +970,7 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi) #endif /* Following use of tty struct directly is deprecated */ if (tty_buffer_request_room(port, bytes_in) < bytes_in) { - if (tty->low_latency) + if (port->low_latency) tty_flip_buffer_push(tty); /* * If this failed then we will throw away the bytes diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 3b8df7b93b73..4632db7a24b7 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -495,7 +495,7 @@ static int serial_m3110_startup(struct uart_port *port) | WC_BAUD_DR2; /* as we use thread to handle tx/rx, need set low latency */ - port->state->port.tty->low_latency = 1; + port->state->port.low_latency = 1; if (max->irq) { max->read_thread = NULL; diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 11b7f5b2eb5f..c356ffff3c71 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -1400,7 +1400,7 @@ static int msm_hs_startup(struct uart_port *uport) /* do not let tty layer execute RX in global workqueue, use a * dedicated workqueue managed by this driver */ - uport->state->port.tty->low_latency = 1; + uport->state->port.low_latency = 1; /* turn on uart clk */ ret = msm_hs_init_clk_locked(uport); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 675343a20f24..b5c4e64f2990 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -867,9 +867,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, port->closing_wait = closing_wait; if (new_info->xmit_fifo_size) uport->fifosize = new_info->xmit_fifo_size; - if (port->tty) - port->tty->low_latency = - (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; + port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; check_and_exit: retval = 0; @@ -1565,7 +1563,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp) */ tty->driver_data = state; state->uart_port->state = state; - tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; + state->port.low_latency = + (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; tty_port_tty_set(port, tty); /* diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 33656b35db05..2f6967d61a80 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -3415,7 +3415,7 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp) goto cleanup; } - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 473d7406db83..9a0358a1e0dd 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -682,7 +682,7 @@ static int open(struct tty_struct *tty, struct file *filp) } mutex_lock(&info->port.mutex); - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index f5794f3d840f..419f58ff4a13 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -761,7 +761,7 @@ static int open(struct tty_struct *tty, struct file *filp) goto cleanup; } - info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 31873e42602a..1bfe97a8e2eb 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -364,7 +364,7 @@ void tty_schedule_flip(struct tty_struct *tty) { struct tty_bufhead *buf = &tty->port->buf; unsigned long flags; - WARN_ON(tty->low_latency); + WARN_ON(tty->port->low_latency); spin_lock_irqsave(&buf->lock, flags); if (buf->tail != NULL) @@ -538,7 +538,7 @@ static void flush_to_ldisc(struct work_struct *work) */ void tty_flush_to_ldisc(struct tty_struct *tty) { - if (!tty->low_latency) + if (!tty->port->low_latency) flush_work(&tty->port->buf.work); } @@ -547,7 +547,8 @@ void tty_flush_to_ldisc(struct tty_struct *tty) * @tty: tty to push * * Queue a push of the terminal flip buffers to the line discipline. This - * function must not be called from IRQ context if tty->low_latency is set. + * function must not be called from IRQ context if port->low_latency is + * set. * * In the event of the queue being busy for flipping the work will be * held off and retried later. @@ -565,7 +566,7 @@ void tty_flip_buffer_push(struct tty_struct *tty) buf->tail->commit = buf->tail->used; spin_unlock_irqrestore(&buf->lock, flags); - if (tty->low_latency) + if (tty->port->low_latency) flush_to_ldisc(&buf->work); else schedule_work(&buf->work); diff --git a/include/linux/tty.h b/include/linux/tty.h index 8db1b569c37a..f16a47a13a09 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -202,7 +202,8 @@ struct tty_port { unsigned long iflags; /* TTYP_ internal flags */ #define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */ #define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */ - unsigned char console:1; /* port is a console */ + unsigned char console:1, /* port is a console */ + low_latency:1; /* direct buffer flush */ struct mutex mutex; /* Locking */ struct mutex buf_mutex; /* Buffer alloc lock */ unsigned char *xmit_buf; /* Optional buffer */ @@ -254,7 +255,7 @@ struct tty_struct { int count; struct winsize winsize; /* termios mutex */ unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1; - unsigned char low_latency:1, warned:1; + unsigned char warned:1; unsigned char ctrl_status; /* ctrl_lock */ unsigned int receive_room; /* Bytes free for queue */ diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c index 14b08e376f9f..2491f6f53871 100644 --- a/net/irda/ircomm/ircomm_tty.c +++ b/net/irda/ircomm/ircomm_tty.c @@ -452,7 +452,7 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) self->line, self->port.count); /* Not really used by us, but lets do it anyway */ - tty->low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + self->port.low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; /* * If the port is the middle of closing, bail out now -- cgit v1.2.3 From b342dd512f7af0e0e14e29c3e1f863150cfc46ff Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 27 Dec 2012 15:51:31 +0800 Subject: drivers/tty/serial: extern function which for release resource, need check pointer, before free it for extern function uart_remove_one_port: need check pointer whether be NULL, before the main work. just like what the other extern function uart_add_one_port has done. uart_add_one_port and uart_remove_one_port are pair information: for the callers (such as drivers/tty/serial/jsm: jsm_tty.c, jsm_driver.c) they realy assume that: they still can call uart_remove_one_port, after uart_add_one_port failed we (as an extern function), have to understand it (just like kfree). Signed-off-by: Chen Gang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index b5c4e64f2990..ca98a3f65fe1 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2643,6 +2643,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) { struct uart_state *state = drv->state + uport->line; struct tty_port *port = &state->port; + int ret = 0; BUG_ON(in_interrupt()); @@ -2657,6 +2658,11 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) * succeeding while we shut down the port. */ mutex_lock(&port->mutex); + if (!state->uart_port) { + mutex_unlock(&port->mutex); + ret = -EINVAL; + goto out; + } uport->flags |= UPF_DEAD; mutex_unlock(&port->mutex); @@ -2680,9 +2686,10 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) uport->type = PORT_UNKNOWN; state->uart_port = NULL; +out: mutex_unlock(&port_mutex); - return 0; + return ret; } /* -- cgit v1.2.3 From 593fb1ae457aab28b392ac114f6e3358788da985 Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Tue, 12 Feb 2013 02:00:43 -0500 Subject: pps: Move timestamp read into PPS code proper The PPS (Pulse-Per-Second) line discipline has developed a number of unhealthy attachments to core tty data and functions, ultimately leading to its breakage. The previous patches fixed the crashing. This one reduces coupling further by eliminating the timestamp parameter from the dcd_change ldisc method. This reduces header file linkage and makes the extension more generic, and the timestamp read is delayed only slightly, from just before the ldisc->ops->dcd_change method call to just after. Fix attendant build breakage in drivers/tty/n_tty.c drivers/tty/tty_buffer.c drivers/staging/speakup/selection.c drivers/staging/dgrp/dgrp_*.c Cc: William Hubbs Cc: Chris Brannon Cc: Kirk Reiser Cc: Samuel Thibault Signed-off-by: Peter Hurley Signed-off-by: George Spelvin Acked-by: Rodolfo Giometti Signed-off-by: Greg Kroah-Hartman --- drivers/pps/clients/pps-ldisc.c | 11 +++++++---- drivers/staging/dgrp/dgrp_net_ops.c | 1 + drivers/staging/dgrp/dgrp_tty.c | 1 + drivers/staging/speakup/selection.c | 1 + drivers/tty/n_tty.c | 3 ++- drivers/tty/serial/serial_core.c | 5 +---- drivers/tty/tty_buffer.c | 1 + include/linux/serial_core.h | 1 - include/linux/tty_ldisc.h | 11 ++++------- 9 files changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c index a94f73e1480d..73bd3bb4d93b 100644 --- a/drivers/pps/clients/pps-ldisc.c +++ b/drivers/pps/clients/pps-ldisc.c @@ -29,11 +29,14 @@ #define PPS_TTY_MAGIC 0x0001 -static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status, - struct pps_event_time *ts) +static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status) { - struct pps_device *pps = pps_lookup_dev(tty); + struct pps_device *pps; + struct pps_event_time ts; + + pps_get_ts(&ts); + pps = pps_lookup_dev(tty); /* * This should never fail, but the ldisc locking is very * convoluted, so don't crash just in case. @@ -42,7 +45,7 @@ static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status, return; /* Now do the PPS event report */ - pps_event(pps, ts, status ? PPS_CAPTUREASSERT : + pps_event(pps, &ts, status ? PPS_CAPTUREASSERT : PPS_CAPTURECLEAR, NULL); dev_dbg(pps->dev, "PPS %s at %lu\n", diff --git a/drivers/staging/dgrp/dgrp_net_ops.c b/drivers/staging/dgrp/dgrp_net_ops.c index 4c7abfabf197..e6018823b9de 100644 --- a/drivers/staging/dgrp/dgrp_net_ops.c +++ b/drivers/staging/dgrp/dgrp_net_ops.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c index 51d3ed3dca27..654f6010b473 100644 --- a/drivers/staging/dgrp/dgrp_tty.c +++ b/drivers/staging/dgrp/dgrp_tty.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include diff --git a/drivers/staging/speakup/selection.c b/drivers/staging/speakup/selection.c index 0612df06a4bf..2aa22379fda0 100644 --- a/drivers/staging/speakup/selection.c +++ b/drivers/staging/speakup/selection.c @@ -2,6 +2,7 @@ #include #include #include +#include /* for dev_warn */ #include #include "speakup.h" diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 095072899b5e..05e72bea9b07 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -49,6 +49,7 @@ #include #include #include +#include /* number of characters left in xmit buffer before select has we have room */ @@ -2188,7 +2189,7 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = { * n_tty_inherit_ops - inherit N_TTY methods * @ops: struct tty_ldisc_ops where to save N_TTY methods * - * Used by a generic struct tty_ldisc_ops to easily inherit N_TTY + * Enables a 'subclass' line discipline to 'inherit' N_TTY * methods. */ diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index ca98a3f65fe1..765be520cd2e 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2726,13 +2726,12 @@ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) struct uart_state *state = uport->state; struct tty_port *port = &state->port; struct tty_ldisc *ld = NULL; - struct pps_event_time ts; struct tty_struct *tty = port->tty; if (tty) ld = tty_ldisc_ref(tty); if (ld && ld->ops->dcd_change) - pps_get_ts(&ts); + ld->ops->dcd_change(tty, status); uport->icount.dcd++; #ifdef CONFIG_HARD_PPS @@ -2747,8 +2746,6 @@ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) tty_hangup(tty); } - if (ld && ld->ops->dcd_change) - ld->ops->dcd_change(tty, status, &ts); if (ld) tty_ldisc_deref(ld); } diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 61ec4ddf47e0..bb119934e76c 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -16,6 +16,7 @@ #include #include #include +#include /** * tty_buffer_free_all - free buffers used by a tty diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index d97142159e0f..87d4bbc773fc 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -29,7 +29,6 @@ #include #include #include -#include #include struct uart_port; diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index fb79dd8d1537..455a0d7bf220 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -100,16 +100,14 @@ * seek to perform this action quickly but should wait until * any pending driver I/O is completed. * - * void (*dcd_change)(struct tty_struct *tty, unsigned int status, - * struct pps_event_time *ts) + * void (*dcd_change)(struct tty_struct *tty, unsigned int status) * - * Tells the discipline that the DCD pin has changed its status and - * the relative timestamp. Pointer ts cannot be NULL. + * Tells the discipline that the DCD pin has changed its status. + * Used exclusively by the N_PPS (Pulse-Per-Second) line discipline. */ #include #include -#include #include struct tty_ldisc_ops { @@ -144,8 +142,7 @@ struct tty_ldisc_ops { void (*receive_buf)(struct tty_struct *, const unsigned char *cp, char *fp, int count); void (*write_wakeup)(struct tty_struct *); - void (*dcd_change)(struct tty_struct *, unsigned int, - struct pps_event_time *); + void (*dcd_change)(struct tty_struct *, unsigned int); struct module *owner; -- cgit v1.2.3 From 42381572f586d4da57e7d65e0fcb45422be3ba7b Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Sun, 10 Feb 2013 04:44:30 -0500 Subject: pps: Additional cleanups in uart_handle_dcd_change An extension of the previous commit, there is no semantic change here, just fewer lines of source code. Signed-off-by: George Spelvin Acked-by: Rodolfo Giometti Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 765be520cd2e..6ce40c1822fc 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2723,15 +2723,15 @@ EXPORT_SYMBOL(uart_match_port); */ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) { - struct uart_state *state = uport->state; - struct tty_port *port = &state->port; - struct tty_ldisc *ld = NULL; + struct tty_port *port = &uport->state->port; struct tty_struct *tty = port->tty; + struct tty_ldisc *ld = tty ? tty_ldisc_ref(tty) : NULL; - if (tty) - ld = tty_ldisc_ref(tty); - if (ld && ld->ops->dcd_change) - ld->ops->dcd_change(tty, status); + if (ld) { + if (ld->ops->dcd_change) + ld->ops->dcd_change(tty, status); + tty_ldisc_deref(ld); + } uport->icount.dcd++; #ifdef CONFIG_HARD_PPS @@ -2745,9 +2745,6 @@ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) else if (tty) tty_hangup(tty); } - - if (ld) - tty_ldisc_deref(ld); } EXPORT_SYMBOL_GPL(uart_handle_dcd_change); -- cgit v1.2.3 From bc80fbe46be7430487a45ad92841932bb2eaa3e6 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 6 Feb 2013 10:55:16 -0500 Subject: tty: Remove ancient hardpps() hardpps() functionality is provided through the N_PPS line discipline now. The new function signature was added in commit 025b40ab (2011-01-12). There was no previous macro or function hardpps(), at least since before the initial commit of v2.6.12 in 2005. It's unlikely this code has been compiled since. Signed-off-by: Peter Hurley Signed-off-by: George Spelvin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/amiserial.c | 5 ----- drivers/tty/serial/serial_core.c | 4 ---- 2 files changed, 9 deletions(-) (limited to 'drivers/tty/serial/serial_core.c') diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 4c7d70172193..fc700342d43f 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -393,11 +393,6 @@ static void check_modem_status(struct serial_state *info) icount->dsr++; if (dstatus & SER_DCD) { icount->dcd++; -#ifdef CONFIG_HARD_PPS - if ((port->flags & ASYNC_HARDPPS_CD) && - !(status & SER_DCD)) - hardpps(); -#endif } if (dstatus & SER_CTS) icount->cts++; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 6ce40c1822fc..a400002dfa84 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2734,10 +2734,6 @@ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) } uport->icount.dcd++; -#ifdef CONFIG_HARD_PPS - if ((uport->flags & UPF_HARDPPS_CD) && status) - hardpps(); -#endif if (port->flags & ASYNC_CHECK_CD) { if (status) -- cgit v1.2.3