From 3ecb3e09b042e70799ff3a1ff464a5ecaa7547d9 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 7 Sep 2015 14:45:25 +0300 Subject: usb: chipidea: Use extcon framework for VBUS and ID detect On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov Signed-off-by: Peter Chen --- drivers/usb/chipidea/otg.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'drivers/usb/chipidea/otg.c') diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index ad6c87a4653c..ab4bd0c2d4ef 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -30,7 +30,44 @@ */ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) { - return hw_read(ci, OP_OTGSC, mask); + struct ci_hdrc_cable *cable; + u32 val = hw_read(ci, OP_OTGSC, mask); + + /* + * If using extcon framework for VBUS and/or ID signal + * detection overwrite OTGSC register value + */ + cable = &ci->platdata->vbus_extcon; + if (!IS_ERR(cable->edev)) { + if (cable->changed) + val |= OTGSC_BSVIS; + else + val &= ~OTGSC_BSVIS; + + cable->changed = false; + + if (cable->state) + val |= OTGSC_BSV; + else + val &= ~OTGSC_BSV; + } + + cable = &ci->platdata->id_extcon; + if (!IS_ERR(cable->edev)) { + if (cable->changed) + val |= OTGSC_IDIS; + else + val &= ~OTGSC_IDIS; + + cable->changed = false; + + if (cable->state) + val |= OTGSC_ID; + else + val &= ~OTGSC_ID; + } + + return val; } /** -- cgit v1.2.3 From 851ce932242d5a79bef8fe625fce37cc2f27033e Mon Sep 17 00:00:00 2001 From: Li Jun Date: Fri, 16 Oct 2015 13:53:20 +0800 Subject: usb: chipidea: otg: don't wait vbus drops below BSV when starts host Some HW design may use ID pin state to control vbus for otg port, so before host role start, the vbus is already turned on, in this case, we do not need wait vbus dropping below BSV. Signed-off-by: Li Jun Signed-off-by: Peter Chen --- drivers/usb/chipidea/otg.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/usb/chipidea/otg.c') diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index ab4bd0c2d4ef..45f86da1d6d3 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -114,9 +114,12 @@ static void ci_handle_id_switch(struct ci_hdrc *ci) ci_role(ci)->name, ci->roles[role]->name); ci_role_stop(ci); - /* wait vbus lower than OTGSC_BSV */ - hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0, - CI_VBUS_STABLE_TIMEOUT_MS); + + if (role == CI_ROLE_GADGET) + /* wait vbus lower than OTGSC_BSV */ + hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0, + CI_VBUS_STABLE_TIMEOUT_MS); + ci_role_start(ci, role); } } -- cgit v1.2.3