From fbb9e22b15ad3c9a98c66bad801b4d1366e8bf20 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Fri, 20 Nov 2015 11:49:28 +0100 Subject: usb: dwc2: host: enable descriptor dma for fs devices As descriptor dma mode does not support split transfers, it can't be enabled for high speed devices. Add a core parameter to enable it for full speed devices. Ensure frame list and descriptor list are correctly freed during disconnect. Acked-by: John Youn Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Gregory Herrero Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd_intr.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers/usb/dwc2/hcd_intr.c') diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index bda0b21b850f..7c15f03b069c 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -372,10 +372,21 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) " --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n", hprt0, !!(hprt0 & HPRT0_ENA)); hprt0_modify |= HPRT0_ENACHG; - if (hprt0 & HPRT0_ENA) + if (hprt0 & HPRT0_ENA) { + hsotg->new_connection = true; dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify); - else + } else { hsotg->flags.b.port_enable_change = 1; + if (hsotg->core_params->dma_desc_fs_enable) { + u32 hcfg; + + hsotg->core_params->dma_desc_enable = 0; + hsotg->new_connection = false; + hcfg = dwc2_readl(hsotg->regs + HCFG); + hcfg &= ~HCFG_DESCDMA; + dwc2_writel(hcfg, hsotg->regs + HCFG); + } + } } /* Overcurrent Change Interrupt */ -- cgit v1.2.3 From 6a6595318ac2dd169d2931a1d9431a64f4ada75c Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 19 Nov 2015 13:23:14 -0800 Subject: usb: dwc2: host: Fix missing device insertions If you've got your interrupt signals bouncing a bit as you insert your USB device, you might end up in a state when the device is connected but the driver doesn't know it. Specifically, the observed order is: 1. hardware sees connect 2. hardware sees disconnect 3. hardware sees connect 4. dwc2_port_intr() - clears connect interrupt 5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect() Now you'll be stuck with the cable plugged in and no further interrupts coming in but the driver will think we're disconnected. We'll fix this by checking for the missing connect interrupt and re-connecting after the disconnect is posted. We don't skip the disconnect because if there is a transitory disconnect we really want to de-enumerate and re-enumerate. Notes: 1. As part of this change we add a "force" parameter to dwc2_hcd_disconnect() so that when we're unloading the module we avoid the new behavior. The need for this was pointed out by John Youn. 2. The bit of code needed at the end of dwc2_hcd_disconnect() is exactly the same bit of code from dwc2_port_intr(). To avoid duplication, we refactor that code out into a new function dwc2_hcd_connect(). Signed-off-by: Douglas Anderson Acked-by: John Youn Tested-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 6 ++++-- drivers/usb/dwc2/core_intr.c | 4 ++-- drivers/usb/dwc2/hcd.c | 40 ++++++++++++++++++++++++++++++++++++++-- drivers/usb/dwc2/hcd_intr.c | 6 +----- 4 files changed, 45 insertions(+), 11 deletions(-) (limited to 'drivers/usb/dwc2/hcd_intr.c') diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index baee2bc1e8a8..05f01785de05 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1180,12 +1180,14 @@ static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg); -extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_connect(struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force); extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg); #else static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) { return 0; } -static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) {} static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {} static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {} static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq) diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 27daa42788b1..61601d16e233 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -239,7 +239,7 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", hsotg->op_state); spin_unlock(&hsotg->lock); - dwc2_hcd_disconnect(hsotg); + dwc2_hcd_disconnect(hsotg, false); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_A_PERIPHERAL; } else { @@ -401,7 +401,7 @@ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) dwc2_op_state_str(hsotg)); if (hsotg->op_state == OTG_STATE_A_HOST) - dwc2_hcd_disconnect(hsotg); + dwc2_hcd_disconnect(hsotg, false); dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); } diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index b2afe913d559..cbfdcb804adb 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -267,16 +267,34 @@ static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) } } +/** + * dwc2_hcd_connect() - Handles connect of the HCD + * + * @hsotg: Pointer to struct dwc2_hsotg + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) +{ + if (hsotg->lx_state != DWC2_L0) + usb_hcd_resume_root_hub(hsotg->priv); + + hsotg->flags.b.port_connect_status_change = 1; + hsotg->flags.b.port_connect_status = 1; +} + /** * dwc2_hcd_disconnect() - Handles disconnect of the HCD * * @hsotg: Pointer to struct dwc2_hsotg + * @force: If true, we won't try to reconnect even if we see device connected. * * Must be called with interrupt disabled and spinlock held */ -void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) +void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) { u32 intr; + u32 hprt0; /* Set status flags for the hub driver */ hsotg->flags.b.port_connect_status_change = 1; @@ -315,6 +333,24 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) dwc2_hcd_cleanup_channels(hsotg); dwc2_host_disconnect(hsotg); + + /* + * Add an extra check here to see if we're actually connected but + * we don't have a detection interrupt pending. This can happen if: + * 1. hardware sees connect + * 2. hardware sees disconnect + * 3. hardware sees connect + * 4. dwc2_port_intr() - clears connect interrupt + * 5. dwc2_handle_common_intr() - calls here + * + * Without the extra check here we will end calling disconnect + * and won't get any future interrupts to handle the connect. + */ + if (!force) { + hprt0 = dwc2_readl(hsotg->regs + HPRT0); + if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS)) + dwc2_hcd_connect(hsotg); + } } /** @@ -2390,7 +2426,7 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd) spin_lock_irqsave(&hsotg->lock, flags); /* Ensure hcd is disconnected */ - dwc2_hcd_disconnect(hsotg); + dwc2_hcd_disconnect(hsotg, true); dwc2_hcd_stop(hsotg); hsotg->lx_state = DWC2_L3; hcd->state = HC_STATE_HALT; diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index 7c15f03b069c..a1eb48e54858 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -350,11 +350,7 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) dev_vdbg(hsotg->dev, "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n", hprt0); - if (hsotg->lx_state != DWC2_L0) - usb_hcd_resume_root_hub(hsotg->priv); - - hsotg->flags.b.port_connect_status_change = 1; - hsotg->flags.b.port_connect_status = 1; + dwc2_hcd_connect(hsotg); hprt0_modify |= HPRT0_CONNDET; /* -- cgit v1.2.3 From 29539019b46f0e5f64f80f2e9dc8f9bb34d16b4b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 20 Nov 2015 09:06:28 -0800 Subject: usb: dwc2: host: Clear interrupts before handling them In general it is wise to clear interrupts before processing them. If you don't do that, you can get: 1. Interrupt happens 2. You look at system state and process interrupt 3. A new interrupt happens 4. You clear interrupt without processing it. This patch was actually a first attempt to fix missing device insertions as described in (usb: dwc2: host: Fix missing device insertions) and it did solve some of the signal bouncing problems but not all of them (which is why I submitted the other patch). Specifically, this patch itself would sometimes change: 1. hardware sees connect 2. hardware sees disconnect 3. hardware sees connect 4. dwc2_port_intr() - clears connect interrupt 5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect() ...to: 1. hardware sees connect 2. hardware sees disconnect 3. dwc2_port_intr() - clears connect interrupt 4. hardware sees connect 5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect() ...but with different timing then sometimes we'd still miss cable insertions. In any case, though this patch doesn't fix any (known) problems, it still seems wise as a general policy to clear interrupt before handling them. Note that for dwc2_handle_usb_port_intr(), instead of moving the clear of PRTINT to the beginning of the function we remove it completely. The only way to clear PRTINT is to clear the sources that set it in the first place. Signed-off-by: Douglas Anderson Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core_intr.c | 49 +++++++++++++++++++++----------------------- drivers/usb/dwc2/hcd_intr.c | 18 ++++++++-------- 2 files changed, 32 insertions(+), 35 deletions(-) (limited to 'drivers/usb/dwc2/hcd_intr.c') diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 61601d16e233..d85c5c9f96c1 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -86,9 +86,6 @@ static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) hprt0 &= ~HPRT0_ENA; dwc2_writel(hprt0, hsotg->regs + HPRT0); } - - /* Clear interrupt */ - dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); } /** @@ -98,11 +95,11 @@ static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) { - dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", - dwc2_is_host_mode(hsotg) ? "Host" : "Device"); - /* Clear interrupt */ dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); + + dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); } /** @@ -276,9 +273,13 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) { - u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + u32 gintmsk; + + /* Clear interrupt */ + dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); /* Need to disable SOF interrupt immediately */ + gintmsk = dwc2_readl(hsotg->regs + GINTMSK); gintmsk &= ~GINTSTS_SOF; dwc2_writel(gintmsk, hsotg->regs + GINTMSK); @@ -295,9 +296,6 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) queue_work(hsotg->wq_otg, &hsotg->wf_otg); spin_lock(&hsotg->lock); } - - /* Clear interrupt */ - dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); } /** @@ -315,12 +313,12 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) { int ret; - dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", - hsotg->lx_state); - /* Clear interrupt */ dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", + hsotg->lx_state); + if (dwc2_is_device_mode(hsotg)) { if (hsotg->lx_state == DWC2_L2) { ret = dwc2_exit_hibernation(hsotg, true); @@ -347,6 +345,10 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) { int ret; + + /* Clear interrupt */ + dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); @@ -368,10 +370,9 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) /* Change to L0 state */ hsotg->lx_state = DWC2_L0; } else { - if (hsotg->core_params->hibernation) { - dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); + if (hsotg->core_params->hibernation) return; - } + if (hsotg->lx_state != DWC2_L1) { u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); @@ -385,9 +386,6 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) hsotg->lx_state = DWC2_L0; } } - - /* Clear interrupt */ - dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); } /* @@ -396,14 +394,14 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) */ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) { + dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device", dwc2_op_state_str(hsotg)); if (hsotg->op_state == OTG_STATE_A_HOST) dwc2_hcd_disconnect(hsotg, false); - - dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); } /* @@ -419,6 +417,9 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) u32 dsts; int ret; + /* Clear interrupt */ + dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, "USB SUSPEND\n"); if (dwc2_is_device_mode(hsotg)) { @@ -437,7 +438,7 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) if (!dwc2_is_device_connected(hsotg)) { dev_dbg(hsotg->dev, "ignore suspend request before enumeration\n"); - goto clear_int; + return; } ret = dwc2_enter_hibernation(hsotg); @@ -476,10 +477,6 @@ skip_power_saving: hsotg->op_state = OTG_STATE_A_HOST; } } - -clear_int: - /* Clear interrupt */ - dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); } #define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index a1eb48e54858..f8253803a050 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -122,6 +122,9 @@ static void dwc2_sof_intr(struct dwc2_hsotg *hsotg) struct dwc2_qh *qh; enum dwc2_transaction_type tr_type; + /* Clear interrupt */ + dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS); + #ifdef DEBUG_SOF dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n"); #endif @@ -146,9 +149,6 @@ static void dwc2_sof_intr(struct dwc2_hsotg *hsotg) tr_type = dwc2_hcd_select_transactions(hsotg); if (tr_type != DWC2_TRANSACTION_NONE) dwc2_hcd_queue_transactions(hsotg, tr_type); - - /* Clear interrupt */ - dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS); } /* @@ -312,6 +312,7 @@ static void dwc2_hprt0_enable(struct dwc2_hsotg *hsotg, u32 hprt0, if (do_reset) { *hprt0_modify |= HPRT0_RST; + dwc2_writel(*hprt0_modify, hsotg->regs + HPRT0); queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work, msecs_to_jiffies(60)); } else { @@ -347,11 +348,12 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) * Set flag and clear if detected */ if (hprt0 & HPRT0_CONNDET) { + dwc2_writel(hprt0_modify | HPRT0_CONNDET, hsotg->regs + HPRT0); + dev_vdbg(hsotg->dev, "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n", hprt0); dwc2_hcd_connect(hsotg); - hprt0_modify |= HPRT0_CONNDET; /* * The Hub driver asserts a reset when it sees port connect @@ -364,10 +366,10 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) * Clear if detected - Set internal flag if disabled */ if (hprt0 & HPRT0_ENACHG) { + dwc2_writel(hprt0_modify | HPRT0_ENACHG, hsotg->regs + HPRT0); dev_vdbg(hsotg->dev, " --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n", hprt0, !!(hprt0 & HPRT0_ENA)); - hprt0_modify |= HPRT0_ENACHG; if (hprt0 & HPRT0_ENA) { hsotg->new_connection = true; dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify); @@ -387,15 +389,13 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg) /* Overcurrent Change Interrupt */ if (hprt0 & HPRT0_OVRCURRCHG) { + dwc2_writel(hprt0_modify | HPRT0_OVRCURRCHG, + hsotg->regs + HPRT0); dev_vdbg(hsotg->dev, " --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n", hprt0); hsotg->flags.b.port_over_current_change = 1; - hprt0_modify |= HPRT0_OVRCURRCHG; } - - /* Clear Port Interrupts */ - dwc2_writel(hprt0_modify, hsotg->regs + HPRT0); } /* -- cgit v1.2.3