From 95da310e66ee8090119596c70ca8432e57f9a97f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 22 Jul 2008 11:09:07 +0100 Subject: usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/empeg.c | 78 ++++++++++++++++++---------------------------- 1 file changed, 30 insertions(+), 48 deletions(-) (limited to 'drivers/usb/serial/empeg.c') diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index c5ec309a3cb1..47ebdf5fad8e 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -31,7 +31,7 @@ * Moved MOD_DEC_USE_COUNT to end of empeg_close(). * * (12/03/2000) gb - * Added port->tty->ldisc.set_termios(port->tty, NULL) to empeg_open() + * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to empeg_open() * This notifies the tty driver that the termios have changed. * * (11/13/2000) gb @@ -77,22 +77,18 @@ static int debug; #define EMPEG_PRODUCT_ID 0x0001 /* function prototypes for an empeg-car player */ -static int empeg_open (struct usb_serial_port *port, struct file *filp); -static void empeg_close (struct usb_serial_port *port, struct file *filp); -static int empeg_write (struct usb_serial_port *port, +static int empeg_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); +static void empeg_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); +static int empeg_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); -static int empeg_write_room (struct usb_serial_port *port); -static int empeg_chars_in_buffer (struct usb_serial_port *port); -static void empeg_throttle (struct usb_serial_port *port); -static void empeg_unthrottle (struct usb_serial_port *port); +static int empeg_write_room (struct tty_struct *tty); +static int empeg_chars_in_buffer (struct tty_struct *tty); +static void empeg_throttle (struct tty_struct *tty); +static void empeg_unthrottle (struct tty_struct *tty); static int empeg_startup (struct usb_serial *serial); static void empeg_shutdown (struct usb_serial *serial); -static int empeg_ioctl (struct usb_serial_port *port, - struct file * file, - unsigned int cmd, - unsigned long arg); -static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios); +static void empeg_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static void empeg_write_bulk_callback (struct urb *urb); static void empeg_read_bulk_callback (struct urb *urb); @@ -125,7 +121,6 @@ static struct usb_serial_driver empeg_device = { .unthrottle = empeg_unthrottle, .attach = empeg_startup, .shutdown = empeg_shutdown, - .ioctl = empeg_ioctl, .set_termios = empeg_set_termios, .write = empeg_write, .write_room = empeg_write_room, @@ -145,7 +140,8 @@ static int bytes_out; /****************************************************************************** * Empeg specific driver functions ******************************************************************************/ -static int empeg_open (struct usb_serial_port *port, struct file *filp) +static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { struct usb_serial *serial = port->serial; int result = 0; @@ -153,7 +149,7 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __func__, port->number); /* Force default termio settings */ - empeg_set_termios (port, NULL) ; + empeg_set_termios (tty, port, NULL) ; bytes_in = 0; bytes_out = 0; @@ -178,7 +174,8 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) } -static void empeg_close (struct usb_serial_port *port, struct file * filp) +static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file * filp) { dbg("%s - port %d", __func__, port->number); @@ -189,7 +186,7 @@ static void empeg_close (struct usb_serial_port *port, struct file * filp) } -static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, int count) +static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; struct urb *urb; @@ -203,7 +200,6 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, dbg("%s - port %d", __func__, port->number); while (count > 0) { - /* try to find a free urb in our list of them */ urb = NULL; @@ -262,15 +258,14 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, bytes_out += transfer_size; } - exit: return bytes_sent; - } -static int empeg_write_room (struct usb_serial_port *port) +static int empeg_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; unsigned long flags; int i; int room = 0; @@ -278,25 +273,22 @@ static int empeg_write_room (struct usb_serial_port *port) dbg("%s - port %d", __func__, port->number); spin_lock_irqsave (&write_urb_pool_lock, flags); - /* tally up the number of bytes available */ for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]->status != -EINPROGRESS) { room += URB_TRANSFER_BUFFER_SIZE; } } - spin_unlock_irqrestore (&write_urb_pool_lock, flags); - dbg("%s - returns %d", __func__, room); - - return (room); + return room; } -static int empeg_chars_in_buffer (struct usb_serial_port *port) +static int empeg_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; unsigned long flags; int i; int chars = 0; @@ -356,7 +348,7 @@ static void empeg_read_bulk_callback (struct urb *urb) usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); - tty = port->tty; + tty = port->port.tty; if (urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); @@ -386,27 +378,24 @@ static void empeg_read_bulk_callback (struct urb *urb) } -static void empeg_throttle (struct usb_serial_port *port) +static void empeg_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } -static void empeg_unthrottle (struct usb_serial_port *port) +static void empeg_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int result; - dbg("%s - port %d", __func__, port->number); port->read_urb->dev = port->serial->dev; - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - if (result) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); - - return; } @@ -436,17 +425,10 @@ static void empeg_shutdown (struct usb_serial *serial) } -static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) -{ - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - - return -ENOIOCTLCMD; -} - - -static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void empeg_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - struct ktermios *termios = port->tty->termios; + struct ktermios *termios = tty->termios; dbg("%s - port %d", __func__, port->number); /* @@ -491,8 +473,8 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol * this is bad as it opens up the possibility of dropping bytes * on the floor. We don't want to drop bytes on the floor. :) */ - port->tty->low_latency = 1; - tty_encode_baud_rate(port->tty, 115200, 115200); + tty->low_latency = 1; + tty_encode_baud_rate(tty, 115200, 115200); } -- cgit v1.2.3 From 93c467952ff6b5c3d92fddf4b1a609e68f6d08d1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 22 Jul 2008 11:11:11 +0100 Subject: empeg: Coding style Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/empeg.c | 203 ++++++++++++++++++++++++--------------------- 1 file changed, 107 insertions(+), 96 deletions(-) (limited to 'drivers/usb/serial/empeg.c') diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 47ebdf5fad8e..a6ab5b58d9ca 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -11,36 +11,39 @@ * it under the terms of the GNU General Public License, as published by * the Free Software Foundation, version 2. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * * (07/16/2001) gb - * remove unused code in empeg_close() (thanks to Oliver Neukum for pointing this - * out) and rewrote empeg_set_termios(). - * + * remove unused code in empeg_close() (thanks to Oliver Neukum for + * pointing this out) and rewrote empeg_set_termios(). + * * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. + * switched from using spinlock to a semaphore, which fixes lots of + * problems. * * (04/08/2001) gb * Identify version on module load. - * + * * (01/22/2001) gb - * Added write_room() and chars_in_buffer() support. - * + * Added write_room() and chars_in_buffer() support. + * * (12/21/2000) gb * Moved termio stuff inside the port->active check. * Moved MOD_DEC_USE_COUNT to end of empeg_close(). - * + * * (12/03/2000) gb - * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to empeg_open() - * This notifies the tty driver that the termios have changed. - * + * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to + * empeg_open(). This notifies the tty driver that the termios have + * changed. + * * (11/13/2000) gb - * Moved tty->low_latency = 1 from empeg_read_bulk_callback() to empeg_open() - * (It only needs to be set once - Doh!) - * + * Moved tty->low_latency = 1 from empeg_read_bulk_callback() to + * empeg_open() (It only needs to be set once - Doh!) + * * (11/11/2000) gb * Updated to work with id_table structure. - * + * * (11/04/2000) gb * Forked this from visor.c, and hacked it up to work with an * Empeg ltd. empeg-car player. Constructive criticism welcomed. @@ -48,7 +51,7 @@ * use of his code, and for his guidance, advice and patience. :) * A 'Thank You' is in order for John Ripley of Empeg ltd for his * advice, and patience too. - * + * */ #include @@ -60,7 +63,7 @@ #include #include #include -#include +#include #include #include @@ -77,27 +80,30 @@ static int debug; #define EMPEG_PRODUCT_ID 0x0001 /* function prototypes for an empeg-car player */ -static int empeg_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void empeg_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static int empeg_write (struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, - int count); -static int empeg_write_room (struct tty_struct *tty); -static int empeg_chars_in_buffer (struct tty_struct *tty); -static void empeg_throttle (struct tty_struct *tty); -static void empeg_unthrottle (struct tty_struct *tty); -static int empeg_startup (struct usb_serial *serial); -static void empeg_shutdown (struct usb_serial *serial); -static void empeg_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static void empeg_write_bulk_callback (struct urb *urb); -static void empeg_read_bulk_callback (struct urb *urb); +static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, + int count); +static int empeg_write_room(struct tty_struct *tty); +static int empeg_chars_in_buffer(struct tty_struct *tty); +static void empeg_throttle(struct tty_struct *tty); +static void empeg_unthrottle(struct tty_struct *tty); +static int empeg_startup(struct usb_serial *serial); +static void empeg_shutdown(struct usb_serial *serial); +static void empeg_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static void empeg_write_bulk_callback(struct urb *urb); +static void empeg_read_bulk_callback(struct urb *urb); static struct usb_device_id id_table [] = { { USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver empeg_driver = { .name = "empeg", @@ -149,7 +155,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); /* Force default termio settings */ - empeg_set_termios (tty, port, NULL) ; + empeg_set_termios(tty, port, NULL) ; bytes_in = 0; bytes_out = 0; @@ -157,7 +163,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, /* Start reading from the device */ usb_fill_bulk_urb( port->read_urb, - serial->dev, + serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -168,14 +174,16 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); return result; } static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file * filp) + struct file *filp) { dbg("%s - port %d", __func__, port->number); @@ -186,7 +194,8 @@ static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, } -static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) +static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; struct urb *urb; @@ -203,7 +212,7 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con /* try to find a free urb in our list of them */ urb = NULL; - spin_lock_irqsave (&write_urb_pool_lock, flags); + spin_lock_irqsave(&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]->status != -EINPROGRESS) { @@ -212,7 +221,7 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con } } - spin_unlock_irqrestore (&write_urb_pool_lock, flags); + spin_unlock_irqrestore(&write_urb_pool_lock, flags); if (urb == NULL) { dbg("%s - no more free urbs", __func__); @@ -220,25 +229,27 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (urb->transfer_buffer == NULL) { - dev_err(&port->dev, "%s no more kernel memory...\n", __func__); + dev_err(&port->dev, + "%s no more kernel memory...\n", + __func__); goto exit; } } - transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE); + transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); - memcpy (urb->transfer_buffer, current_position, transfer_size); + memcpy(urb->transfer_buffer, current_position, transfer_size); usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer); /* build up our urb */ - usb_fill_bulk_urb ( + usb_fill_bulk_urb( urb, serial->dev, usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), + port->bulk_out_endpointAddress), urb->transfer_buffer, transfer_size, empeg_write_bulk_callback, @@ -260,7 +271,7 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con } exit: return bytes_sent; -} +} static int empeg_write_room(struct tty_struct *tty) @@ -272,14 +283,13 @@ static int empeg_write_room(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave (&write_urb_pool_lock, flags); + spin_lock_irqsave(&write_urb_pool_lock, flags); /* tally up the number of bytes available */ for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]->status != -EINPROGRESS) { + if (write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; - } - } - spin_unlock_irqrestore (&write_urb_pool_lock, flags); + } + spin_unlock_irqrestore(&write_urb_pool_lock, flags); dbg("%s - returns %d", __func__, room); return room; @@ -295,25 +305,21 @@ static int empeg_chars_in_buffer(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave (&write_urb_pool_lock, flags); + spin_lock_irqsave(&write_urb_pool_lock, flags); /* tally up the number of bytes waiting */ for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]->status == -EINPROGRESS) { + if (write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; - } } - spin_unlock_irqrestore (&write_urb_pool_lock, flags); - + spin_unlock_irqrestore(&write_urb_pool_lock, flags); dbg("%s - returns %d", __func__, chars); - - return (chars); - + return chars; } -static void empeg_write_bulk_callback (struct urb *urb) +static void empeg_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; int status = urb->status; @@ -330,7 +336,7 @@ static void empeg_write_bulk_callback (struct urb *urb) } -static void empeg_read_bulk_callback (struct urb *urb) +static void empeg_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct tty_struct *tty; @@ -346,8 +352,8 @@ static void empeg_read_bulk_callback (struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); - + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); tty = port->port.tty; if (urb->actual_length) { @@ -360,7 +366,7 @@ static void empeg_read_bulk_callback (struct urb *urb) /* Continue trying to always read */ usb_fill_bulk_urb( port->read_urb, - port->serial->dev, + port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -371,7 +377,9 @@ static void empeg_read_bulk_callback (struct urb *urb) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); + dev_err(&urb->dev->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); return; @@ -395,11 +403,13 @@ static void empeg_unthrottle(struct tty_struct *tty) port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); } -static int empeg_startup (struct usb_serial *serial) +static int empeg_startup(struct usb_serial *serial) { int r; @@ -411,7 +421,7 @@ static int empeg_startup (struct usb_serial *serial) return -ENODEV; } dbg("%s - reset config", __func__); - r = usb_reset_configuration (serial->dev); + r = usb_reset_configuration(serial->dev); /* continue on with initialization */ return r; @@ -419,9 +429,9 @@ static int empeg_startup (struct usb_serial *serial) } -static void empeg_shutdown (struct usb_serial *serial) +static void empeg_shutdown(struct usb_serial *serial) { - dbg ("%s", __func__); + dbg("%s", __func__); } @@ -432,14 +442,14 @@ static void empeg_set_termios(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); /* - * The empeg-car player wants these particular tty settings. - * You could, for example, change the baud rate, however the - * player only supports 115200 (currently), so there is really - * no point in support for changes to the tty settings. - * (at least for now) - * - * The default requirements for this device are: - */ + * The empeg-car player wants these particular tty settings. + * You could, for example, change the baud rate, however the + * player only supports 115200 (currently), so there is really + * no point in support for changes to the tty settings. + * (at least for now) + * + * The default requirements for this device are: + */ termios->c_iflag &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ @@ -478,13 +488,13 @@ static void empeg_set_termios(struct tty_struct *tty, } -static int __init empeg_init (void) +static int __init empeg_init(void) { struct urb *urb; int i, retval; - /* create our write urb pool and transfer buffers */ - spin_lock_init (&write_urb_pool_lock); + /* create our write urb pool and transfer buffers */ + spin_lock_init(&write_urb_pool_lock); for (i = 0; i < NUM_URBS; ++i) { urb = usb_alloc_urb(0, GFP_KERNEL); write_urb_pool[i] = urb; @@ -493,9 +503,10 @@ static int __init empeg_init (void) continue; } - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s - out of memory for urb buffers.", + err("%s - out of memory for urb buffers.", __func__); continue; } @@ -524,36 +535,36 @@ failed_usb_serial_register: } -static void __exit empeg_exit (void) +static void __exit empeg_exit(void) { int i; unsigned long flags; usb_deregister(&empeg_driver); - usb_serial_deregister (&empeg_device); + usb_serial_deregister(&empeg_device); - spin_lock_irqsave (&write_urb_pool_lock, flags); + spin_lock_irqsave(&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]) { - /* FIXME - uncomment the following usb_kill_urb call when - * the host controllers get fixed to set urb->dev = NULL after - * the urb is finished. Otherwise this call oopses. */ + /* FIXME - uncomment the following usb_kill_urb call + * when the host controllers get fixed to set urb->dev + * = NULL after the urb is finished. Otherwise this + * call oopses. */ /* usb_kill_urb(write_urb_pool[i]); */ kfree(write_urb_pool[i]->transfer_buffer); - usb_free_urb (write_urb_pool[i]); + usb_free_urb(write_urb_pool[i]); } } - - spin_unlock_irqrestore (&write_urb_pool_lock, flags); + spin_unlock_irqrestore(&write_urb_pool_lock, flags); } module_init(empeg_init); module_exit(empeg_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); -- cgit v1.2.3