From 5d4e9bd79a5ab5bd4695d3becaa71da447a76a94 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 16 Jan 2013 14:53:50 +0100 Subject: mfd: twl-core: Clean up module id lookup and definitions Use enums for all module definitions: twl_module_ids for common functionality among twl4030/twl6030 twl4030_module_ids for twl4030 specific ids twl6030_module_ids for twl6030 specific ids In this way the list can be managed easier when new functionality going to be implemented. Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- include/linux/i2c/twl.h | 66 ++++++++++++++++++++++++++----------------------- 1 file changed, 35 insertions(+), 31 deletions(-) (limited to 'include/linux/i2c') diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 1ff54b114efc..72adc8807912 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -39,51 +39,55 @@ * address each module uses within a given i2c slave. */ +/* Module IDs for similar functionalities found in twl4030/twl6030 */ +enum twl_module_ids { + TWL_MODULE_USB, + TWL_MODULE_PIH, + TWL_MODULE_MAIN_CHARGE, + TWL_MODULE_PM_MASTER, + TWL_MODULE_PM_RECEIVER, + + TWL_MODULE_RTC, + TWL_MODULE_PWM, + TWL_MODULE_LED, + TWL_MODULE_SECURED_REG, + + TWL_MODULE_LAST, +}; + +/* Modules only available in twl4030 series */ enum twl4030_module_ids { - TWL4030_MODULE_USB = 0, /* Slave 0 (i2c address 0x48) */ - TWL4030_MODULE_AUDIO_VOICE, /* Slave 1 (i2c address 0x49) */ + TWL4030_MODULE_AUDIO_VOICE = TWL_MODULE_LAST, TWL4030_MODULE_GPIO, TWL4030_MODULE_INTBR, - TWL4030_MODULE_PIH, - TWL4030_MODULE_TEST, - TWL4030_MODULE_KEYPAD, /* Slave 2 (i2c address 0x4a) */ + TWL4030_MODULE_KEYPAD, + TWL4030_MODULE_MADC, TWL4030_MODULE_INTERRUPTS, - TWL4030_MODULE_LED, - - TWL4030_MODULE_MAIN_CHARGE, TWL4030_MODULE_PRECHARGE, - TWL4030_MODULE_PWM0, - TWL4030_MODULE_PWM1, - TWL4030_MODULE_PWMA, + TWL4030_MODULE_BACKUP, + TWL4030_MODULE_INT, - TWL4030_MODULE_PWMB, TWL5031_MODULE_ACCESSORY, TWL5031_MODULE_INTERRUPTS, - TWL4030_MODULE_BACKUP, /* Slave 3 (i2c address 0x4b) */ - TWL4030_MODULE_INT, - TWL4030_MODULE_PM_MASTER, - TWL4030_MODULE_PM_RECEIVER, - TWL4030_MODULE_RTC, - TWL4030_MODULE_SECURED_REG, TWL4030_MODULE_LAST, }; -/* Similar functionalities implemented in TWL4030/6030 */ -#define TWL_MODULE_USB TWL4030_MODULE_USB -#define TWL_MODULE_PIH TWL4030_MODULE_PIH -#define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE -#define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER -#define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER -#define TWL_MODULE_RTC TWL4030_MODULE_RTC -#define TWL_MODULE_PWM TWL4030_MODULE_PWM0 -#define TWL_MODULE_LED TWL4030_MODULE_LED - -#define TWL6030_MODULE_ID0 13 -#define TWL6030_MODULE_ID1 14 -#define TWL6030_MODULE_ID2 15 +/* Modules only available in twl6030 series */ +enum twl6030_module_ids { + TWL6030_MODULE_ID0 = TWL_MODULE_LAST, + TWL6030_MODULE_ID1, + TWL6030_MODULE_ID2, + TWL6030_MODULE_GPADC, + TWL6030_MODULE_GASGAUGE, + + TWL6030_MODULE_LAST, +}; + +/* Until the clients has been converted to use TWL_MODULE_LED */ +#define TWL4030_MODULE_LED TWL_MODULE_LED #define GPIO_INTR_OFFSET 0 #define KEYPAD_INTR_OFFSET 1 -- cgit v1.2.3 From ac7bc5a953c38c32513d1825decf336c4909ce3b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 16 Jan 2013 14:53:58 +0100 Subject: mfd: twl-core: Remove no longer valid comment regarding to write buffer size With the regmap conversion there is no longeer a need to allocate bigger buffer for writes Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- drivers/mfd/twl-core.c | 3 --- include/linux/i2c/twl.h | 3 --- 2 files changed, 6 deletions(-) (limited to 'include/linux/i2c') diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index e2895a4026a1..9661204fb159 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -308,9 +308,6 @@ EXPORT_SYMBOL(twl_rev); * @reg: register address (just offset will do) * @num_bytes: number of bytes to transfer * - * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and - * valid data starts at Offset 1. - * * Returns the result of operation - 0 is success */ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 72adc8807912..e441fd8e7c86 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -182,9 +182,6 @@ int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); /* * Read and write several 8-bit registers at once. - * - * IMPORTANT: For twl_i2c_write(), allocate num_bytes + 1 - * for the value, and populate your data starting at offset 1. */ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); -- cgit v1.2.3 From fbc6ae363e5e589a28135c051a2ff835e6236d5f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 16 Jan 2013 14:53:59 +0100 Subject: mfd: twl-core: Move twl_i2c_read/write_u8 to header as inline function twl_i2c_read/write_u8 become as a simple wrapper over the twl_i2c_read/write. Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- drivers/mfd/twl-core.c | 28 ---------------------------- include/linux/i2c/twl.h | 17 +++++++++++------ 2 files changed, 11 insertions(+), 34 deletions(-) (limited to 'include/linux/i2c') diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 9661204fb159..557f9ee5ec18 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -379,34 +379,6 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) } EXPORT_SYMBOL(twl_i2c_read); -/** - * twl_i2c_write_u8 - Writes a 8 bit register in TWL4030/TWL5030/TWL60X0 - * @mod_no: module number - * @value: the value to be written 8 bit - * @reg: register address (just offset will do) - * - * Returns result of operation - 0 is success - */ -int twl_i2c_write_u8(u8 mod_no, u8 value, u8 reg) -{ - return twl_i2c_write(mod_no, &value, reg, 1); -} -EXPORT_SYMBOL(twl_i2c_write_u8); - -/** - * twl_i2c_read_u8 - Reads a 8 bit register from TWL4030/TWL5030/TWL60X0 - * @mod_no: module number - * @value: the value read 8 bit - * @reg: register address (just offset will do) - * - * Returns result of operation - 0 is success - */ -int twl_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) -{ - return twl_i2c_read(mod_no, value, reg, 1); -} -EXPORT_SYMBOL(twl_i2c_read_u8); - /*----------------------------------------------------------------------*/ /** diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index e441fd8e7c86..488debbef895 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -174,18 +174,23 @@ static inline int twl_class_is_ ##class(void) \ TWL_CLASS_IS(4030, TWL4030_CLASS_ID) TWL_CLASS_IS(6030, TWL6030_CLASS_ID) -/* - * Read and write single 8-bit registers - */ -int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg); -int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); - /* * Read and write several 8-bit registers at once. */ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +/* + * Read and write single 8-bit registers + */ +static inline int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg) { + return twl_i2c_write(mod_no, &val, reg, 1); +} + +static inline int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg) { + return twl_i2c_read(mod_no, val, reg, 1); +} + int twl_get_type(void); int twl_get_version(void); int twl_get_hfclk_rate(void); -- cgit v1.2.3 From 22dfab7fd7fd5a8a2c5556ca0a8fd35fc959abc8 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Thu, 7 Mar 2013 19:43:33 -0800 Subject: Input: atmel_mxt_ts - Support for touchpad variant This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz Signed-off-by: Benson Leung Signed-off-by: Nick Dyer Tested-by: Olof Johansson Signed-off-by: Linus Torvalds --- drivers/input/touchscreen/atmel_mxt_ts.c | 64 +++++++++++++++++++++++++++++++- include/linux/i2c/atmel_mxt_ts.h | 5 +++ 2 files changed, 67 insertions(+), 2 deletions(-) (limited to 'include/linux/i2c') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index d04f810cb1dd..8ed279c56d27 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -181,6 +181,12 @@ #define MXT_FWRESET_TIME 175 /* msec */ +/* MXT_SPT_GPIOPWM_T19 field */ +#define MXT_GPIO0_MASK 0x04 +#define MXT_GPIO1_MASK 0x08 +#define MXT_GPIO2_MASK 0x10 +#define MXT_GPIO3_MASK 0x20 + /* Command to unlock bootloader */ #define MXT_UNLOCK_CMD_MSB 0xaa #define MXT_UNLOCK_CMD_LSB 0xdc @@ -212,6 +218,8 @@ /* Touchscreen absolute values */ #define MXT_MAX_AREA 0xff +#define MXT_PIXELS_PER_MM 20 + struct mxt_info { u8 family_id; u8 variant_id; @@ -243,6 +251,8 @@ struct mxt_data { const struct mxt_platform_data *pdata; struct mxt_object *object_table; struct mxt_info info; + bool is_tp; + unsigned int irq; unsigned int max_x; unsigned int max_y; @@ -251,6 +261,7 @@ struct mxt_data { u8 T6_reportid; u8 T9_reportid_min; u8 T9_reportid_max; + u8 T19_reportid; }; static bool mxt_object_readable(unsigned int type) @@ -502,6 +513,21 @@ static int mxt_write_object(struct mxt_data *data, return mxt_write_reg(data->client, reg + offset, val); } +static void mxt_input_button(struct mxt_data *data, struct mxt_message *message) +{ + struct input_dev *input = data->input_dev; + bool button; + int i; + + /* Active-low switch */ + for (i = 0; i < MXT_NUM_GPIO; i++) { + if (data->pdata->key_map[i] == KEY_RESERVED) + continue; + button = !(message->message[0] & MXT_GPIO0_MASK << i); + input_report_key(input, data->pdata->key_map[i], button); + } +} + static void mxt_input_touchevent(struct mxt_data *data, struct mxt_message *message, int id) { @@ -585,6 +611,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id) int id = reportid - data->T9_reportid_min; mxt_input_touchevent(data, &message, id); update_input = true; + } else if (message.reportid == data->T19_reportid) { + mxt_input_button(data, &message); + update_input = true; } else { mxt_dump_message(dev, &message); } @@ -764,6 +793,9 @@ static int mxt_get_object_table(struct mxt_data *data) data->T9_reportid_min = min_id; data->T9_reportid_max = max_id; break; + case MXT_SPT_GPIOPWM_T19: + data->T19_reportid = min_id; + break; } } @@ -777,7 +809,7 @@ static void mxt_free_object_table(struct mxt_data *data) data->T6_reportid = 0; data->T9_reportid_min = 0; data->T9_reportid_max = 0; - + data->T19_reportid = 0; } static int mxt_initialize(struct mxt_data *data) @@ -1115,9 +1147,13 @@ static int mxt_probe(struct i2c_client *client, goto err_free_mem; } - input_dev->name = "Atmel maXTouch Touchscreen"; + data->is_tp = pdata && pdata->is_tp; + + input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" : + "Atmel maXTouch Touchscreen"; snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0", client->adapter->nr, client->addr); + input_dev->phys = data->phys; input_dev->id.bustype = BUS_I2C; @@ -1140,6 +1176,29 @@ static int mxt_probe(struct i2c_client *client, __set_bit(EV_KEY, input_dev->evbit); __set_bit(BTN_TOUCH, input_dev->keybit); + if (data->is_tp) { + int i; + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + + for (i = 0; i < MXT_NUM_GPIO; i++) + if (pdata->key_map[i] != KEY_RESERVED) + __set_bit(pdata->key_map[i], input_dev->keybit); + + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit); + + input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_X, + MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, + MXT_PIXELS_PER_MM); + } + /* For single touch */ input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0); @@ -1258,6 +1317,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume); static const struct i2c_device_id mxt_id[] = { { "qt602240_ts", 0 }, { "atmel_mxt_ts", 0 }, + { "atmel_mxt_tp", 0 }, { "mXT224", 0 }, { } }; diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h index f027f7a63511..99e379b74398 100644 --- a/include/linux/i2c/atmel_mxt_ts.h +++ b/include/linux/i2c/atmel_mxt_ts.h @@ -15,6 +15,9 @@ #include +/* For key_map array */ +#define MXT_NUM_GPIO 4 + /* Orient */ #define MXT_NORMAL 0x0 #define MXT_DIAGONAL 0x1 @@ -39,6 +42,8 @@ struct mxt_platform_data { unsigned int voltage; unsigned char orient; unsigned long irqflags; + bool is_tp; + const unsigned int key_map[MXT_NUM_GPIO]; }; #endif /* __LINUX_ATMEL_MXT_TS_H */ -- cgit v1.2.3