summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/usb/gadget_serial.txt4
-rw-r--r--Documentation/usb/proc_usb_info.txt6
-rw-r--r--Documentation/usb/usbmon.txt12
-rw-r--r--arch/powerpc/kernel/misc_32.S4
-rw-r--r--arch/powerpc/lib/rheap.c1
-rw-r--r--drivers/char/xilinx_hwicap/buffer_icap.c3
-rw-r--r--drivers/char/xilinx_hwicap/buffer_icap.h3
-rw-r--r--drivers/char/xilinx_hwicap/fifo_icap.c3
-rw-r--r--drivers/char/xilinx_hwicap/fifo_icap.h3
-rw-r--r--drivers/char/xilinx_hwicap/xilinx_hwicap.c3
-rw-r--r--drivers/char/xilinx_hwicap/xilinx_hwicap.h3
-rw-r--r--drivers/staging/Kconfig3
-rw-r--r--drivers/usb/class/usbtmc.c1
-rw-r--r--drivers/usb/core/driver.c4
-rw-r--r--drivers/usb/gadget/f_rndis.c4
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.h6
-rw-r--r--drivers/usb/serial/pl2303.c2
-rw-r--r--drivers/usb/serial/pl2303.h8
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c55
-rw-r--r--drivers/usb/storage/unusual_devs.h16
-rw-r--r--fs/cifs/cifssmb.c3
-rw-r--r--include/linux/usb/ch9.h8
-rw-r--r--lib/dynamic_printk.c6
24 files changed, 74 insertions, 89 deletions
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 9b22bd14c348..eac7df94d8e3 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@ modules.
Then you must load the gadget serial driver. To load it as an
ACM device (recommended for interoperability), do this:
- modprobe g_serial use_acm=1
+ modprobe g_serial
To load it as a vendor specific bulk in/out device, do this:
- modprobe g_serial
+ modprobe g_serial use_acm=0
This will also automatically load the underlying gadget peripheral
controller driver. This must be done each time you reboot the gadget
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 077e9032d0cd..fafcd4723260 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@ it and 002/048 sometime later.
These files can be read as binary data. The binary data consists
of first the device descriptor, then the descriptors for each
-configuration of the device. That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device. Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel. This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
These files may also be used to write user-level drivers for the USB
devices. You would open the /proc/bus/usb/BBB/DDD file read/write,
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 2917ce4ffdc4..270481906dc8 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
Verify that bus sockets are present.
# ls /sys/kernel/debug/usbmon
-0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
+0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
2. Find which bus connects to the desired device
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
Here is the list of words, from left to right:
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+ of the URB structure in hexadecimal, but can be a sequence number or any
+ other unique string, within reason.
- Timestamp in microseconds, a decimal number. The timestamp's resolution
depends on available clock, and so it can be much worse than a microsecond
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index d108715129e2..5c33bc14bd9f 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -486,13 +486,13 @@ _GLOBAL(_tlbil_va)
tlbsx 0,r3
mfspr r4,SPRN_MAS1 /* check valid */
andis. r3,r4,MAS1_VALID@h
- beqlr
+ beq 1f
rlwinm r4,r4,0,1,31
mtspr SPRN_MAS1,r4
tlbwe
msync
isync
- wrtee r10
+1: wrtee r10
blr
#endif /* CONFIG_FSL_BOOKE */
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 29b2941cada0..45907c1dae66 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co
be = blk->start + blk->size;
if (s >= bs && e <= be)
break;
+ blk = NULL;
}
if (blk == NULL)
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index aa7f7962a9a0..05d897764f02 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 8b0252bf06e2..d4f419ee87ab 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 776b50528478..02225eb19cf6 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 62bda453c90b..4c9dd9a3b62a 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d16131949097..f40ab699860f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2007-2008 Xilinx Inc.
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 24d0d9b938fb..8cca11981c5f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2007 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index c95b286a1239..5d457c96bd7e 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -22,6 +22,8 @@ menuconfig STAGING
If in doubt, say N here.
+if STAGING
+
config STAGING_EXCLUDE_BUILD
bool "Exclude Staging drivers from being built" if STAGING
default y
@@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig"
source "drivers/staging/poch/Kconfig"
endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 8e74657f106c..43a863c5cc43 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = {
{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
{ 0, } /* terminating entry */
};
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
/*
* This structure is the capabilities for the device
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3d7793d93031..8c081308b0e2 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev)
* altsetting means creating new endpoint device entries).
* When either of these happens, defer the Set-Interface.
*/
- if (!error && intf->dev.power.status == DPM_ON)
+ if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+ ; /* Already in altsetting 0 so skip Set-Interface */
+ else if (!error && intf->dev.power.status == DPM_ON)
usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
else
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 428b5993575a..3a8bb53fc473 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
fs_in_desc.bEndpointAddress;
hs_out_desc.bEndpointAddress =
fs_out_desc.bEndpointAddress;
+ hs_notify_desc.bEndpointAddress =
+ fs_notify_desc.bEndpointAddress;
/* copy descriptors, and track endpoint copies */
f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
f->hs_descriptors, &hs_in_desc);
rndis->hs.out = usb_find_endpoint(eth_hs_function,
f->hs_descriptors, &hs_out_desc);
+ rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_notify_desc);
}
rndis->port.open = rndis_open;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aad1359a3eb1..fb6f2933b01b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992abad2..373ee09975bb 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
/* AlphaMicro Components AMC-232USB01 device */
#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
/* the VID is the standard ftdi vid (FTDI_VID) */
#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
/* OpenDCC (www.opendcc.de) product id */
#define FTDI_OPENDCC_PID 0xBFD8
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II 0xF0C8
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 491c8857b644..1aed584be5eb 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+ { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a3bd039c78e9..54974f446a8c 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -110,3 +110,11 @@
/* Y.C. Cable U.S.A., Inc - USB to RS-232 */
#define YCCABLE_VENDOR_ID 0x05ad
#define YCCABLE_PRODUCT_ID 0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID 0x5372
+#define SUPERIAL_PRODUCT_ID 0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID 0x03f0
+#define HP_LD220_PRODUCT_ID 0x3524
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 31c42d1cae13..01d0c70d60e9 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,56 +16,6 @@
* For questions or problems with this driver, contact Texas Instruments
* technical support, or Al Borchers <alborchers@steinerpoint.com>, or
* Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- * exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- * exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*} # delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- * s=$1
- * shift
- * for i
- * do
- * if [[ $s -eq $i ]]
- * then
- * return 0
- * fi
- * done
- * return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- * echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
*/
#include <linux/kernel.h>
@@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial)
goto free_tdev;
}
- /* the second configuration must be set (in sysfs by hotplug script) */
+ /* the second configuration must be set */
if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
- status = -ENODEV;
+ status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+ status = status ? status : -ENODEV;
goto free_tdev;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e61f2bfc64ad..bfcc1fe82518 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,8 +167,22 @@ UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551,
+ "Nokia",
+ "3500c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601,
+ "Nokia",
+ "Nokia 3109c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701,
"Nokia",
"5310",
US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 2af8626ced43..6d51696dc762 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3983,7 +3983,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
node->flags = le16_to_cpu(pSMBr->DFSFlags);
if (is_unicode) {
- __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+ __le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
+ GFP_KERNEL);
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
node->path_consumed = hostlen_fromUCS(tmp,
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 73a2f4eb1f7a..9b42baed3900 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -158,8 +158,12 @@ struct usb_ctrlrequest {
* (rarely) accepted by SET_DESCRIPTOR.
*
* Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire". Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
*/
/*
diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c
index d83660fd6fdd..8e30295e8566 100644
--- a/lib/dynamic_printk.c
+++ b/lib/dynamic_printk.c
@@ -135,7 +135,7 @@ int unregister_dynamic_debug_module(char *mod_name)
nr_entries--;
out:
up(&debug_list_mutex);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
@@ -289,7 +289,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf,
dynamic_enabled = DYNAMIC_ENABLED_SOME;
err = 0;
printk(KERN_DEBUG
- "debugging enabled for module %s",
+ "debugging enabled for module %s\n",
elem->name);
} else if (!value && (elem->enable == 1)) {
elem->enable = 0;
@@ -309,7 +309,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf,
err = 0;
printk(KERN_DEBUG
"debugging disabled for module "
- "%s", elem->name);
+ "%s\n", elem->name);
}
}
}