summaryrefslogtreecommitdiff
path: root/Documentation/ABI/testing
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci18
-rw-r--r--Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration12
-rw-r--r--Documentation/ABI/testing/sysfs-devices-platform-docg334
-rw-r--r--Documentation/ABI/testing/sysfs-driver-wacom17
-rw-r--r--Documentation/ABI/testing/sysfs-kernel-slab4
-rw-r--r--Documentation/ABI/testing/sysfs-module16
6 files changed, 93 insertions, 8 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 349ecf26ce10..34f51100f029 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -66,6 +66,24 @@ Description:
re-discover previously removed devices.
Depends on CONFIG_HOTPLUG.
+What: /sys/bus/pci/devices/.../msi_irqs/
+Date: September, 2011
+Contact: Neil Horman <nhorman@tuxdriver.com>
+Description:
+ The /sys/devices/.../msi_irqs directory contains a variable set
+ of sub-directories, with each sub-directory being named after a
+ corresponding msi irq vector allocated to that device. Each
+ numbered sub-directory N contains attributes of that irq.
+ Note that this directory is not created for device drivers which
+ do not support msi irqs
+
+What: /sys/bus/pci/devices/.../msi_irqs/<N>/mode
+Date: September 2011
+Contact: Neil Horman <nhorman@tuxdriver.com>
+Description:
+ This attribute indicates the mode that the irq vector named by
+ the parent directory is in (msi vs. msix)
+
What: /sys/bus/pci/devices/.../remove
Date: January 2009
Contact: Linux PCI developers <linux-pci@vger.kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
new file mode 100644
index 000000000000..4cf1e72222d9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
@@ -0,0 +1,12 @@
+What: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+Date: Oct 2011
+KernelVersion: 3.0
+Contact: Mark Godfrey <mark.godfrey@stericsson.com>
+Description: The rtc_calibration attribute allows the userspace to
+ calibrate the AB8500.s 32KHz Real Time Clock.
+ Every 60 seconds the AB8500 will correct the RTC's value
+ by adding to it the value of this attribute.
+ The range of the attribute is -127 to +127 in units of
+ 30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
+Users: The /vendor/st-ericsson/base_utilities/core/rtc_calibration
+ daemon uses this interface.
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-docg3 b/Documentation/ABI/testing/sysfs-devices-platform-docg3
new file mode 100644
index 000000000000..8aa36716882f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-docg3
@@ -0,0 +1,34 @@
+What: /sys/devices/platform/docg3/f[0-3]_dps[01]_is_keylocked
+Date: November 2011
+KernelVersion: 3.3
+Contact: Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+ Show whether the floor (0 to 4), protection area (0 or 1) is
+ keylocked. Each docg3 chip (or floor) has 2 protection areas,
+ which can cover any part of it, block aligned, called DPS.
+ The protection has information embedded whether it blocks reads,
+ writes or both.
+ The result is:
+ 0 -> the DPS is not keylocked
+ 1 -> the DPS is keylocked
+Users: None identified so far.
+
+What: /sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
+Date: November 2011
+KernelVersion: 3.3
+Contact: Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+ Enter the protection key for the floor (0 to 4), protection area
+ (0 or 1). Each docg3 chip (or floor) has 2 protection areas,
+ which can cover any part of it, block aligned, called DPS.
+ The protection has information embedded whether it blocks reads,
+ writes or both.
+ The protection key is a string of 8 bytes (value 0-255).
+ Entering the correct value toggle the lock, and can be observed
+ through f[0-3]_dps[01]_is_keylocked.
+ Possible values are:
+ - 8 bytes
+ Typical values are:
+ - "00000000"
+ - "12345678"
+Users: None identified so far.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index 82d4df136444..0130d6683c14 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -15,9 +15,9 @@ Contact: linux-input@vger.kernel.org
Description:
Attribute group for control of the status LEDs and the OLEDs.
This attribute group is only available for Intuos 4 M, L,
- and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
- Therefore its presence implicitly signifies the presence of
- said LEDs and OLEDs on the tablet device.
+ and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD
+ (LEDs only). Therefore its presence implicitly signifies the
+ presence of said LEDs and OLEDs on the tablet device.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
Date: August 2011
@@ -41,16 +41,17 @@ Date: August 2011
Contact: linux-input@vger.kernel.org
Description:
Writing to this file sets which one of the four (for Intuos 4)
- or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
- The other three LEDs on the same side are always inactive.
+ or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status
+ LEDs is active (0..3). The other three LEDs on the same side are
+ always inactive.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
Date: September 2011
Contact: linux-input@vger.kernel.org
Description:
- Writing to this file sets which one of the left four (for Cintiq 21UX2)
- status LEDs is active (0..3). The other three LEDs on the left are always
- inactive.
+ Writing to this file sets which one of the left four (for Cintiq 21UX2
+ and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
+ the left are always inactive.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
Date: August 2011
diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
index 8b093f8222d3..91bd6ca5440f 100644
--- a/Documentation/ABI/testing/sysfs-kernel-slab
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -346,6 +346,10 @@ Description:
number of objects per slab. If a slab cannot be allocated
because of fragmentation, SLUB will retry with the minimum order
possible depending on its characteristics.
+ When debug_guardpage_minorder=N (N > 0) parameter is specified
+ (see Documentation/kernel-parameters.txt), the minimum possible
+ order is used and this sysfs entry can not be used to change
+ the order at run time.
What: /sys/kernel/slab/cache/order_fallback
Date: April 2008
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index 9489ea8e294c..47064c2b1f79 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -33,3 +33,19 @@ Description: Maximum time allowed for periodic transfers per microframe (μs)
Beware, non-standard modes are usually not thoroughly tested by
hardware designers, and the hardware can malfunction when this
setting differ from default 100.
+
+What: /sys/module/*/{coresize,initsize}
+Date: Jan 2012
+KernelVersion:»·3.3
+Contact: Kay Sievers <kay.sievers@vrfy.org>
+Description: Module size in bytes.
+
+What: /sys/module/*/taint
+Date: Jan 2012
+KernelVersion:»·3.3
+Contact: Kay Sievers <kay.sievers@vrfy.org>
+Description: Module taint flags:
+ P - proprietary module
+ O - out-of-tree module
+ F - force-loaded module
+ C - staging driver module