summaryrefslogtreecommitdiff
path: root/arch/ia64
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64')
-rw-r--r--arch/ia64/Kconfig420
-rw-r--r--arch/ia64/Kconfig.debug64
-rw-r--r--arch/ia64/Makefile115
-rw-r--r--arch/ia64/configs/bigsur_defconfig1172
-rw-r--r--arch/ia64/configs/sim_defconfig534
-rw-r--r--arch/ia64/configs/sn2_defconfig1038
-rw-r--r--arch/ia64/configs/tiger_defconfig1098
-rw-r--r--arch/ia64/configs/zx1_defconfig1273
-rw-r--r--arch/ia64/defconfig1199
-rw-r--r--arch/ia64/dig/Makefile9
-rw-r--r--arch/ia64/dig/machvec.c3
-rw-r--r--arch/ia64/dig/setup.c86
-rw-r--r--arch/ia64/hp/common/Makefile10
-rw-r--r--arch/ia64/hp/common/hwsw_iommu.c185
-rw-r--r--arch/ia64/hp/common/sba_iommu.c2121
-rw-r--r--arch/ia64/hp/sim/Kconfig20
-rw-r--r--arch/ia64/hp/sim/Makefile16
-rw-r--r--arch/ia64/hp/sim/boot/Makefile37
-rw-r--r--arch/ia64/hp/sim/boot/boot_head.S144
-rw-r--r--arch/ia64/hp/sim/boot/bootloader.c176
-rw-r--r--arch/ia64/hp/sim/boot/bootloader.lds65
-rw-r--r--arch/ia64/hp/sim/boot/fw-emu.c398
-rw-r--r--arch/ia64/hp/sim/boot/ssc.h35
-rw-r--r--arch/ia64/hp/sim/hpsim.S10
-rw-r--r--arch/ia64/hp/sim/hpsim_console.c65
-rw-r--r--arch/ia64/hp/sim/hpsim_irq.c51
-rw-r--r--arch/ia64/hp/sim/hpsim_machvec.c3
-rw-r--r--arch/ia64/hp/sim/hpsim_setup.c52
-rw-r--r--arch/ia64/hp/sim/hpsim_ssc.h36
-rw-r--r--arch/ia64/hp/sim/simeth.c530
-rw-r--r--arch/ia64/hp/sim/simscsi.c404
-rw-r--r--arch/ia64/hp/sim/simserial.c1032
-rw-r--r--arch/ia64/hp/zx1/Makefile8
-rw-r--r--arch/ia64/hp/zx1/hpzx1_machvec.c3
-rw-r--r--arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c3
-rw-r--r--arch/ia64/ia32/Makefile12
-rw-r--r--arch/ia64/ia32/binfmt_elf32.c294
-rw-r--r--arch/ia64/ia32/elfcore32.h138
-rw-r--r--arch/ia64/ia32/ia32_entry.S500
-rw-r--r--arch/ia64/ia32/ia32_ioctl.c48
-rw-r--r--arch/ia64/ia32/ia32_ldt.c147
-rw-r--r--arch/ia64/ia32/ia32_signal.c1036
-rw-r--r--arch/ia64/ia32/ia32_support.c264
-rw-r--r--arch/ia64/ia32/ia32_traps.c156
-rw-r--r--arch/ia64/ia32/ia32priv.h544
-rw-r--r--arch/ia64/ia32/sys_ia32.c2747
-rw-r--r--arch/ia64/install.sh40
-rw-r--r--arch/ia64/kernel/Makefile52
-rw-r--r--arch/ia64/kernel/acpi-ext.c100
-rw-r--r--arch/ia64/kernel/acpi.c841
-rw-r--r--arch/ia64/kernel/asm-offsets.c239
-rw-r--r--arch/ia64/kernel/brl_emu.c234
-rw-r--r--arch/ia64/kernel/cyclone.c109
-rw-r--r--arch/ia64/kernel/domain.c382
-rw-r--r--arch/ia64/kernel/efi.c832
-rw-r--r--arch/ia64/kernel/efi_stub.S86
-rw-r--r--arch/ia64/kernel/entry.S1587
-rw-r--r--arch/ia64/kernel/entry.h82
-rw-r--r--arch/ia64/kernel/fsys.S884
-rw-r--r--arch/ia64/kernel/gate-data.S3
-rw-r--r--arch/ia64/kernel/gate.S372
-rw-r--r--arch/ia64/kernel/gate.lds.S95
-rw-r--r--arch/ia64/kernel/head.S996
-rw-r--r--arch/ia64/kernel/ia64_ksyms.c127
-rw-r--r--arch/ia64/kernel/init_task.c46
-rw-r--r--arch/ia64/kernel/iosapic.c827
-rw-r--r--arch/ia64/kernel/irq.c238
-rw-r--r--arch/ia64/kernel/irq_ia64.c278
-rw-r--r--arch/ia64/kernel/irq_lsapic.c37
-rw-r--r--arch/ia64/kernel/ivt.S1619
-rw-r--r--arch/ia64/kernel/machvec.c70
-rw-r--r--arch/ia64/kernel/mca.c1470
-rw-r--r--arch/ia64/kernel/mca_asm.S928
-rw-r--r--arch/ia64/kernel/mca_drv.c639
-rw-r--r--arch/ia64/kernel/mca_drv.h113
-rw-r--r--arch/ia64/kernel/mca_drv_asm.S45
-rw-r--r--arch/ia64/kernel/minstate.h251
-rw-r--r--arch/ia64/kernel/module.c952
-rw-r--r--arch/ia64/kernel/pal.S302
-rw-r--r--arch/ia64/kernel/palinfo.c1023
-rw-r--r--arch/ia64/kernel/patch.c189
-rw-r--r--arch/ia64/kernel/perfmon.c6676
-rw-r--r--arch/ia64/kernel/perfmon_default_smpl.c306
-rw-r--r--arch/ia64/kernel/perfmon_generic.h45
-rw-r--r--arch/ia64/kernel/perfmon_itanium.h115
-rw-r--r--arch/ia64/kernel/perfmon_mckinley.h187
-rw-r--r--arch/ia64/kernel/process.c800
-rw-r--r--arch/ia64/kernel/ptrace.c1627
-rw-r--r--arch/ia64/kernel/sal.c302
-rw-r--r--arch/ia64/kernel/salinfo.c629
-rw-r--r--arch/ia64/kernel/semaphore.c165
-rw-r--r--arch/ia64/kernel/setup.c723
-rw-r--r--arch/ia64/kernel/sigframe.h25
-rw-r--r--arch/ia64/kernel/signal.c691
-rw-r--r--arch/ia64/kernel/smp.c376
-rw-r--r--arch/ia64/kernel/smpboot.c692
-rw-r--r--arch/ia64/kernel/sys_ia64.c298
-rw-r--r--arch/ia64/kernel/time.c255
-rw-r--r--arch/ia64/kernel/topology.c92
-rw-r--r--arch/ia64/kernel/traps.c609
-rw-r--r--arch/ia64/kernel/unaligned.c1521
-rw-r--r--arch/ia64/kernel/unwind.c2306
-rw-r--r--arch/ia64/kernel/unwind_decoder.c459
-rw-r--r--arch/ia64/kernel/unwind_i.h164
-rw-r--r--arch/ia64/kernel/vmlinux.lds.S251
-rw-r--r--arch/ia64/lib/Makefile52
-rw-r--r--arch/ia64/lib/bitop.c88
-rw-r--r--arch/ia64/lib/carta_random.S54
-rw-r--r--arch/ia64/lib/checksum.c102
-rw-r--r--arch/ia64/lib/clear_page.S77
-rw-r--r--arch/ia64/lib/clear_user.S209
-rw-r--r--arch/ia64/lib/copy_page.S98
-rw-r--r--arch/ia64/lib/copy_page_mck.S185
-rw-r--r--arch/ia64/lib/copy_user.S610
-rw-r--r--arch/ia64/lib/csum_partial_copy.c151
-rw-r--r--arch/ia64/lib/dec_and_lock.c42
-rw-r--r--arch/ia64/lib/do_csum.S323
-rw-r--r--arch/ia64/lib/flush.S39
-rw-r--r--arch/ia64/lib/idiv32.S83
-rw-r--r--arch/ia64/lib/idiv64.S80
-rw-r--r--arch/ia64/lib/io.c165
-rw-r--r--arch/ia64/lib/ip_fast_csum.S90
-rw-r--r--arch/ia64/lib/memcpy.S301
-rw-r--r--arch/ia64/lib/memcpy_mck.S661
-rw-r--r--arch/ia64/lib/memset.S362
-rw-r--r--arch/ia64/lib/strlen.S192
-rw-r--r--arch/ia64/lib/strlen_user.S198
-rw-r--r--arch/ia64/lib/strncpy_from_user.S44
-rw-r--r--arch/ia64/lib/strnlen_user.S45
-rw-r--r--arch/ia64/lib/swiotlb.c658
-rw-r--r--arch/ia64/lib/xor.S184
-rw-r--r--arch/ia64/mm/Makefile12
-rw-r--r--arch/ia64/mm/contig.c299
-rw-r--r--arch/ia64/mm/discontig.c737
-rw-r--r--arch/ia64/mm/extable.c90
-rw-r--r--arch/ia64/mm/fault.c261
-rw-r--r--arch/ia64/mm/hugetlbpage.c357
-rw-r--r--arch/ia64/mm/init.c597
-rw-r--r--arch/ia64/mm/numa.c49
-rw-r--r--arch/ia64/mm/tlb.c190
-rw-r--r--arch/ia64/module.lds13
-rw-r--r--arch/ia64/oprofile/Kconfig26
-rw-r--r--arch/ia64/oprofile/Makefile10
-rw-r--r--arch/ia64/oprofile/backtrace.c150
-rw-r--r--arch/ia64/oprofile/init.c38
-rw-r--r--arch/ia64/oprofile/perfmon.c100
-rw-r--r--arch/ia64/pci/Makefile4
-rw-r--r--arch/ia64/pci/pci.c735
-rwxr-xr-xarch/ia64/scripts/check-gas15
-rw-r--r--arch/ia64/scripts/check-gas-asm.S2
-rw-r--r--arch/ia64/scripts/check-model.c1
-rw-r--r--arch/ia64/scripts/check-segrel.S4
-rw-r--r--arch/ia64/scripts/check-segrel.lds11
-rw-r--r--arch/ia64/scripts/check-serialize.S2
-rw-r--r--arch/ia64/scripts/check-text-align.S6
-rwxr-xr-xarch/ia64/scripts/toolchain-flags53
-rwxr-xr-xarch/ia64/scripts/unwcheck.py64
-rw-r--r--arch/ia64/sn/Makefile14
-rw-r--r--arch/ia64/sn/include/ioerror.h81
-rw-r--r--arch/ia64/sn/include/pci/pcibr_provider.h149
-rw-r--r--arch/ia64/sn/include/pci/pcibus_provider_defs.h43
-rw-r--r--arch/ia64/sn/include/pci/pcidev.h54
-rw-r--r--arch/ia64/sn/include/pci/pic.h261
-rw-r--r--arch/ia64/sn/include/pci/tiocp.h256
-rw-r--r--arch/ia64/sn/include/tio.h37
-rw-r--r--arch/ia64/sn/include/xtalk/hubdev.h67
-rw-r--r--arch/ia64/sn/include/xtalk/xbow.h291
-rw-r--r--arch/ia64/sn/include/xtalk/xwidgetdev.h70
-rw-r--r--arch/ia64/sn/kernel/Makefile12
-rw-r--r--arch/ia64/sn/kernel/bte.c453
-rw-r--r--arch/ia64/sn/kernel/bte_error.c198
-rw-r--r--arch/ia64/sn/kernel/huberror.c201
-rw-r--r--arch/ia64/sn/kernel/idle.c30
-rw-r--r--arch/ia64/sn/kernel/io_init.c411
-rw-r--r--arch/ia64/sn/kernel/iomv.c70
-rw-r--r--arch/ia64/sn/kernel/irq.c431
-rw-r--r--arch/ia64/sn/kernel/klconflib.c108
-rw-r--r--arch/ia64/sn/kernel/machvec.c11
-rw-r--r--arch/ia64/sn/kernel/mca.c135
-rw-r--r--arch/ia64/sn/kernel/setup.c621
-rw-r--r--arch/ia64/sn/kernel/sn2/Makefile13
-rw-r--r--arch/ia64/sn/kernel/sn2/cache.c34
-rw-r--r--arch/ia64/sn/kernel/sn2/io.c101
-rw-r--r--arch/ia64/sn/kernel/sn2/prominfo_proc.c279
-rw-r--r--arch/ia64/sn/kernel/sn2/ptc_deadlock.S82
-rw-r--r--arch/ia64/sn/kernel/sn2/sn2_smp.c295
-rw-r--r--arch/ia64/sn/kernel/sn2/sn_hwperf.c690
-rw-r--r--arch/ia64/sn/kernel/sn2/sn_proc_fs.c149
-rw-r--r--arch/ia64/sn/kernel/sn2/timer.c36
-rw-r--r--arch/ia64/sn/kernel/sn2/timer_interrupt.c63
-rw-r--r--arch/ia64/sn/pci/Makefile10
-rw-r--r--arch/ia64/sn/pci/pci_dma.c363
-rw-r--r--arch/ia64/sn/pci/pcibr/Makefile11
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_ate.c188
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_dma.c379
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_provider.c170
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_reg.c282
197 files changed, 69771 insertions, 0 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
new file mode 100644
index 000000000000..33fcb205fcb7
--- /dev/null
+++ b/arch/ia64/Kconfig
@@ -0,0 +1,420 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "IA-64 Linux Kernel Configuration"
+
+source "init/Kconfig"
+
+menu "Processor type and features"
+
+config IA64
+ bool
+ default y
+ help
+ The Itanium Processor Family is Intel's 64-bit successor to
+ the 32-bit X86 line. The IA-64 Linux project has a home
+ page at <http://www.linuxia64.org/> and a mailing list at
+ <linux-ia64@vger.kernel.org>.
+
+config 64BIT
+ bool
+ default y
+
+config MMU
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config TIME_INTERPOLATION
+ bool
+ default y
+
+config EFI
+ bool
+ default y
+
+config GENERIC_IOMAP
+ bool
+ default y
+
+choice
+ prompt "System type"
+ default IA64_GENERIC
+
+config IA64_GENERIC
+ bool "generic"
+ select NUMA
+ select ACPI_NUMA
+ select VIRTUAL_MEM_MAP
+ select DISCONTIGMEM
+ help
+ This selects the system type of your hardware. A "generic" kernel
+ will run on any supported IA-64 system. However, if you configure
+ a kernel for your specific system, it will be faster and smaller.
+
+ generic For any supported IA-64 system
+ DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
+ HP-zx1/sx1000 For HP systems
+ HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
+ SGI-SN2 For SGI Altix systems
+ Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
+
+ If you don't know what to do, choose "generic".
+
+config IA64_DIG
+ bool "DIG-compliant"
+
+config IA64_HP_ZX1
+ bool "HP-zx1/sx1000"
+ help
+ Build a kernel that runs on HP zx1 and sx1000 systems. This adds
+ support for the HP I/O MMU.
+
+config IA64_HP_ZX1_SWIOTLB
+ bool "HP-zx1/sx1000 with software I/O TLB"
+ help
+ Build a kernel that runs on HP zx1 and sx1000 systems even when they
+ have broken PCI devices which cannot DMA to full 32 bits. Apart
+ from support for the HP I/O MMU, this includes support for the software
+ I/O TLB, which allows supporting the broken devices at the expense of
+ wasting some kernel memory (about 2MB by default).
+
+config IA64_SGI_SN2
+ bool "SGI-SN2"
+ help
+ Selecting this option will optimize the kernel for use on sn2 based
+ systems, but the resulting kernel binary will not run on other
+ types of ia64 systems. If you have an SGI Altix system, it's safe
+ to select this option. If in doubt, select ia64 generic support
+ instead.
+
+config IA64_HP_SIM
+ bool "Ski-simulator"
+
+endchoice
+
+choice
+ prompt "Processor type"
+ default ITANIUM
+
+config ITANIUM
+ bool "Itanium"
+ help
+ Select your IA-64 processor type. The default is Itanium.
+ This choice is safe for all IA-64 systems, but may not perform
+ optimally on systems with, say, Itanium 2 or newer processors.
+
+config MCKINLEY
+ bool "Itanium 2"
+ help
+ Select this to configure for an Itanium 2 (McKinley) processor.
+
+endchoice
+
+choice
+ prompt "Kernel page size"
+ default IA64_PAGE_SIZE_16KB
+
+config IA64_PAGE_SIZE_4KB
+ bool "4KB"
+ help
+ This lets you select the page size of the kernel. For best IA-64
+ performance, a page size of 8KB or 16KB is recommended. For best
+ IA-32 compatibility, a page size of 4KB should be selected (the vast
+ majority of IA-32 binaries work perfectly fine with a larger page
+ size). For Itanium 2 or newer systems, a page size of 64KB can also
+ be selected.
+
+ 4KB For best IA-32 compatibility
+ 8KB For best IA-64 performance
+ 16KB For best IA-64 performance
+ 64KB Requires Itanium 2 or newer processor.
+
+ If you don't know what to do, choose 16KB.
+
+config IA64_PAGE_SIZE_8KB
+ bool "8KB"
+
+config IA64_PAGE_SIZE_16KB
+ bool "16KB"
+
+config IA64_PAGE_SIZE_64KB
+ depends on !ITANIUM
+ bool "64KB"
+
+endchoice
+
+config IA64_BRL_EMU
+ bool
+ depends on ITANIUM
+ default y
+
+# align cache-sensitive data to 128 bytes
+config IA64_L1_CACHE_SHIFT
+ int
+ default "7" if MCKINLEY
+ default "6" if ITANIUM
+
+# align cache-sensitive data to 64 bytes
+config NUMA
+ bool "NUMA support"
+ depends on !IA64_HP_SIM
+ default y if IA64_SGI_SN2
+ select ACPI_NUMA
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server systems. If in doubt, say N.
+
+config VIRTUAL_MEM_MAP
+ bool "Virtual mem map"
+ default y if !IA64_HP_SIM
+ help
+ Say Y to compile the kernel with support for a virtual mem map.
+ This code also only takes effect if a memory hole of greater than
+ 1 Gb is found during boot. You must turn this option on if you
+ require the DISCONTIGMEM option for your machine. If you are
+ unsure, say Y.
+
+config HOLES_IN_ZONE
+ bool
+ default y if VIRTUAL_MEM_MAP
+
+config DISCONTIGMEM
+ bool "Discontiguous memory support"
+ depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
+ default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config IA64_CYCLONE
+ bool "Cyclone (EXA) Time Source support"
+ help
+ Say Y here to enable support for IBM EXA Cyclone time source.
+ If you're unsure, answer N.
+
+config IOSAPIC
+ bool
+ depends on !IA64_HP_SIM
+ default y
+
+config IA64_SGI_SN_SIM
+ bool "SGI Medusa Simulator Support"
+ depends on IA64_SGI_SN2
+ help
+ If you are compiling a kernel that will run under SGI's IA-64
+ simulator (Medusa) then say Y, otherwise say N.
+
+config FORCE_MAX_ZONEORDER
+ int
+ default "18"
+
+config SMP
+ bool "Symmetric multi-processing support"
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ systems, but will use only one CPU of a multiprocessor system. If
+ you say Y here, the kernel will run on many, but not all,
+ single processor systems. On a single processor system, the kernel
+ will run faster if you say N here.
+
+ See also the <file:Documentation/smp.txt> and the SMP-HOWTO
+ available at <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-512)"
+ range 2 512
+ depends on SMP
+ default "64"
+ help
+ You should set this to the number of CPUs in your system, but
+ keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
+ only use 2 CPUs on a >2 CPU system. Setting this to a value larger
+ than 64 will cause the use of a CPU mask array, causing a small
+ performance hit.
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP && EXPERIMENTAL
+ select HOTPLUG
+ default n
+ ---help---
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu/cpu#.
+ Say N if you want to disable CPU hotplug.
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config HAVE_DEC_LOCK
+ bool
+ depends on (SMP || PREEMPT)
+ default y
+
+config IA32_SUPPORT
+ bool "Support for Linux/x86 binaries"
+ help
+ IA-64 processors can execute IA-32 (X86) instructions. By
+ saying Y here, the kernel will include IA-32 system call
+ emulation support which makes it possible to transparently
+ run IA-32 Linux binaries on an IA-64 Linux system.
+ If in doubt, say Y.
+
+config COMPAT
+ bool
+ depends on IA32_SUPPORT
+ default y
+
+config IA64_MCA_RECOVERY
+ tristate "MCA recovery from errors other than TLB."
+
+config PERFMON
+ bool "Performance monitor support"
+ help
+ Selects whether support for the IA-64 performance monitor hardware
+ is included in the kernel. This makes some kernel data-structures a
+ little bigger and slows down execution a bit, but it is generally
+ a good idea to turn this on. If you're unsure, say Y.
+
+config IA64_PALINFO
+ tristate "/proc/pal support"
+ help
+ If you say Y here, you are able to get PAL (Processor Abstraction
+ Layer) information in /proc/pal. This contains useful information
+ about the processors in your systems, such as cache and TLB sizes
+ and the PAL firmware version in use.
+
+ To use this option, you have to ensure that the "/proc file system
+ support" (CONFIG_PROC_FS) is enabled, too.
+
+config ACPI_DEALLOCATE_IRQ
+ bool
+ depends on IOSAPIC && EXPERIMENTAL
+ default y
+
+source "drivers/firmware/Kconfig"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management and ACPI"
+
+config PM
+ bool "Power Management support"
+ depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB
+ default y
+ help
+ "Power Management" means that parts of your computer are shut
+ off or put into a power conserving "sleep" mode if they are not
+ being used. There are two competing standards for doing this: APM
+ and ACPI. If you want to use either one, say Y here and then also
+ to the requisite support below.
+
+ Power Management is most important for battery powered laptop
+ computers; if you have a laptop, check out the Linux Laptop home
+ page on the WWW at <http://www.linux-on-laptops.com/> and the
+ Battery Powered Linux mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that, even if you say N here, Linux on the x86 architecture
+ will issue the hlt instruction if nothing is to be done, thereby
+ sending the processor to sleep and saving power.
+
+config ACPI
+ bool
+ depends on !IA64_HP_SIM
+ default y
+
+if !IA64_HP_SIM
+
+source "drivers/acpi/Kconfig"
+
+endif
+
+endmenu
+
+if !IA64_HP_SIM
+
+menu "Bus options (PCI, PCMCIA)"
+
+config PCI
+ bool "PCI support"
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+config PCI_DOMAINS
+ bool
+ default PCI
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+endif
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "lib/Kconfig"
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+source "arch/ia64/hp/sim/Kconfig"
+
+source "arch/ia64/oprofile/Kconfig"
+
+source "arch/ia64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug
new file mode 100644
index 000000000000..de9d507ba0fd
--- /dev/null
+++ b/arch/ia64/Kconfig.debug
@@ -0,0 +1,64 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+choice
+ prompt "Physical memory granularity"
+ default IA64_GRANULE_64MB
+
+config IA64_GRANULE_16MB
+ bool "16MB"
+ help
+ IA-64 identity-mapped regions use a large page size called "granules".
+
+ Select "16MB" for a small granule size.
+ Select "64MB" for a large granule size. This is the current default.
+
+config IA64_GRANULE_64MB
+ bool "64MB"
+ depends on !(IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_SGI_SN2)
+
+endchoice
+
+config IA64_PRINT_HAZARDS
+ bool "Print possible IA-64 dependency violations to console"
+ depends on DEBUG_KERNEL
+ help
+ Selecting this option prints more information for Illegal Dependency
+ Faults, that is, for Read-after-Write (RAW), Write-after-Write (WAW),
+ or Write-after-Read (WAR) violations. This option is ignored if you
+ are compiling for an Itanium A step processor
+ (CONFIG_ITANIUM_ASTEP_SPECIFIC). If you're unsure, select Y.
+
+config DISABLE_VHPT
+ bool "Disable VHPT"
+ depends on DEBUG_KERNEL
+ help
+ The Virtual Hash Page Table (VHPT) enhances virtual address
+ translation performance. Normally you want the VHPT active but you
+ can select this option to disable the VHPT for debugging. If you're
+ unsure, answer N.
+
+config IA64_DEBUG_CMPXCHG
+ bool "Turn on compare-and-exchange bug checking (slow!)"
+ depends on DEBUG_KERNEL
+ help
+ Selecting this option turns on bug checking for the IA-64
+ compare-and-exchange instructions. This is slow! Itaniums
+ from step B3 or later don't have this problem. If you're unsure,
+ select N.
+
+config IA64_DEBUG_IRQ
+ bool "Turn on irq debug checks (slow!)"
+ depends on DEBUG_KERNEL
+ help
+ Selecting this option turns on bug checking for the IA-64 irq_save
+ and restore instructions. It's useful for tracking down spinlock
+ problems, but slow! If you're unsure, select N.
+
+config SYSVIPC_COMPAT
+ bool
+ depends on COMPAT && SYSVIPC
+ default y
+
+endmenu
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
new file mode 100644
index 000000000000..f9bd88ada708
--- /dev/null
+++ b/arch/ia64/Makefile
@@ -0,0 +1,115 @@
+#
+# ia64/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1998-2004 by David Mosberger-Tang <davidm@hpl.hp.com>
+#
+
+NM := $(CROSS_COMPILE)nm -B
+READELF := $(CROSS_COMPILE)readelf
+
+export AWK
+
+CHECKFLAGS += -m64 -D__ia64=1 -D__ia64__=1 -D_LP64 -D__LP64__
+
+OBJCOPYFLAGS := --strip-all
+LDFLAGS_vmlinux := -static
+LDFLAGS_MODULE += -T $(srctree)/arch/ia64/module.lds
+AFLAGS_KERNEL := -mconstant-gp
+EXTRA :=
+
+cflags-y := -pipe $(EXTRA) -ffixed-r13 -mfixed-range=f12-f15,f32-f127 \
+ -falign-functions=32 -frename-registers -fno-optimize-sibling-calls
+CFLAGS_KERNEL := -mconstant-gp
+
+GCC_VERSION := $(call cc-version)
+GAS_STATUS = $(shell $(srctree)/arch/ia64/scripts/check-gas "$(CC)" "$(OBJDUMP)")
+CPPFLAGS += $(shell $(srctree)/arch/ia64/scripts/toolchain-flags "$(CC)" "$(OBJDUMP)" "$(READELF)")
+
+ifeq ($(GAS_STATUS),buggy)
+$(error Sorry, you need a newer version of the assember, one that is built from \
+ a source-tree that post-dates 18-Dec-2002. You can find a pre-compiled \
+ static binary of such an assembler at: \
+ \
+ ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
+endif
+
+ifneq ($(shell if [ $(GCC_VERSION) -lt 0300 ] ; then echo "bad"; fi ;),)
+$(error Sorry, your compiler is too old. GCC v2.96 is known to generate bad code.)
+endif
+
+ifeq ($(GCC_VERSION),0304)
+ cflags-$(CONFIG_ITANIUM) += -mtune=merced
+ cflags-$(CONFIG_MCKINLEY) += -mtune=mckinley
+endif
+
+CFLAGS += $(cflags-y)
+head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o
+
+libs-y += arch/ia64/lib/
+core-y += arch/ia64/kernel/ arch/ia64/mm/
+core-$(CONFIG_IA32_SUPPORT) += arch/ia64/ia32/
+core-$(CONFIG_IA64_DIG) += arch/ia64/dig/
+core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/
+core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/
+core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
+core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/
+
+drivers-$(CONFIG_PCI) += arch/ia64/pci/
+drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/
+drivers-$(CONFIG_IA64_HP_ZX1) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
+drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
+drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/
+drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
+
+boot := arch/ia64/hp/sim/boot
+
+.PHONY: boot compressed check
+
+all: compressed unwcheck
+
+compressed: vmlinux.gz
+
+vmlinux.gz: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $@
+
+unwcheck: vmlinux
+ -$(Q)READELF=$(READELF) $(srctree)/arch/ia64/scripts/unwcheck.py $<
+
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+CLEAN_FILES += include/asm-ia64/.offsets.h.stamp vmlinux.gz bootloader
+
+MRPROPER_FILES += include/asm-ia64/offsets.h
+
+prepare: include/asm-ia64/offsets.h
+
+arch/ia64/kernel/asm-offsets.s: include/asm include/linux/version.h include/config/MARKER
+
+include/asm-ia64/offsets.h: arch/ia64/kernel/asm-offsets.s
+ $(call filechk,gen-asm-offsets)
+
+arch/ia64/kernel/asm-offsets.s: include/asm-ia64/.offsets.h.stamp
+
+include/asm-ia64/.offsets.h.stamp:
+ mkdir -p include/asm-ia64
+ [ -s include/asm-ia64/offsets.h ] \
+ || echo "#define IA64_TASK_SIZE 0" > include/asm-ia64/offsets.h
+ touch $@
+
+boot: lib/lib.a vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $@
+
+install: vmlinux.gz
+ sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
+
+define archhelp
+ echo '* compressed - Build compressed kernel image'
+ echo ' install - Install compressed kernel image'
+ echo ' boot - Build vmlinux and bootloader for Ski simulator'
+ echo '* unwcheck - Check vmlinux for invalid unwind info'
+endef
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
new file mode 100644
index 000000000000..b95fcf86ea00
--- /dev/null
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -0,0 +1,1172 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10-rc2
+# Mon Nov 29 13:27:48 2004
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+# CONFIG_IA64_GENERIC is not set
+CONFIG_IA64_DIG=y
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+CONFIG_ITANIUM=y
+# CONFIG_MCKINLEY is not set
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_IA64_BRL_EMU=y
+CONFIG_IA64_L1_CACHE_SHIFT=6
+# CONFIG_NUMA is not set
+# CONFIG_VIRTUAL_MEM_MAP is not set
+# CONFIG_IA64_CYCLONE is not set
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_PREEMPT=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+CONFIG_ACPI=y
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=m
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_EEPRO100_PIO is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+CONFIG_DRM_R128=m
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_OPL3_LIB=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS4281=m
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VX222 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_AUDIO=m
+CONFIG_USB_BLUETOOTH_TTY=m
+CONFIG_USB_MIDI=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_RW_DETECT is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+# CONFIG_XFS_RT is not set
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_SECURITY=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+CONFIG_DEVPTS_FS_XATTR=y
+CONFIG_DEVPTS_FS_SECURITY=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
new file mode 100644
index 000000000000..a26781cfe8bf
--- /dev/null
+++ b/arch/ia64/configs/sim_defconfig
@@ -0,0 +1,534 @@
+#
+# Automatically generated make config: don't edit
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+# CONFIG_STANDALONE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_HOTPLUG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_SGI_SN2 is not set
+CONFIG_IA64_HP_SIM=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+# CONFIG_IA64_PAGE_SIZE_16KB is not set
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_IA64_L1_CACHE_SHIFT=7
+# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
+# CONFIG_VIRTUAL_MEM_MAP is not set
+# CONFIG_IA64_CYCLONE is not set
+CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_SMP=y
+CONFIG_NR_CPUS=64
+CONFIG_PREEMPT=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+# CONFIG_PERFMON is not set
+CONFIG_IA64_PALINFO=m
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+# CONFIG_SMBIOS is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management and ACPI
+#
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_NETDEVICES is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# HP Simulator drivers
+#
+CONFIG_HP_SIMETH=y
+CONFIG_HP_SIMSERIAL=y
+CONFIG_HP_SIMSERIAL_CONSOLE=y
+CONFIG_HP_SIMSCSI=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
new file mode 100644
index 000000000000..bfeb952fe8e2
--- /dev/null
+++ b/arch/ia64/configs/sn2_defconfig
@@ -0,0 +1,1038 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10
+# Mon Jan 10 13:57:35 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CPUSETS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+CONFIG_IA64_SGI_SN2=y
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_DISCONTIGMEM=y
+# CONFIG_IA64_CYCLONE is not set
+CONFIG_IOSAPIC=y
+CONFIG_IA64_SGI_SN_SIM=y
+CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_PREEMPT=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_ACPI_DEALLOCATE_IRQ=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+# CONFIG_EFI_PCDP is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management and ACPI
+#
+CONFIG_ACPI=y
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+CONFIG_ACPI_INTERPRETER=y
+# CONFIG_ACPI_BUTTON is not set
+CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_FAN is not set
+# CONFIG_ACPI_PROCESSOR is not set
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_ACPI is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+CONFIG_HOTPLUG_PCI_SGI=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SGIIOC4=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+CONFIG_SCSI_QLA22XX=y
+CONFIG_SCSI_QLA2300=y
+CONFIG_SCSI_QLA2322=y
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID6 is not set
+CONFIG_MD_MULTIPATH=y
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_NETLINK_DEV=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+CONFIG_TIGON3=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+CONFIG_S2IO=m
+# CONFIG_S2IO_NAPI is not set
+# CONFIG_2BUFF_MODE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_SNSC=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+CONFIG_RAW_DRIVER=m
+# CONFIG_HPET is not set
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_MMTIMER=y
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_RT=y
+CONFIG_XFS_QUOTA=y
+# CONFIG_XFS_SECURITY is not set
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_TMPFS_SECURITY=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
new file mode 100644
index 000000000000..99830e8fc9ba
--- /dev/null
+++ b/arch/ia64/configs/tiger_defconfig
@@ -0,0 +1,1098 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc2
+# Sat Jan 22 11:17:02 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+# CONFIG_IA64_GENERIC is not set
+CONFIG_IA64_DIG=y
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+# CONFIG_NUMA is not set
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_PREEMPT is not set
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_ACPI_DEALLOCATE_IRQ=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+CONFIG_ACPI=y
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_BUTTON=m
+# CONFIG_ACPI_VIDEO is not set
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+# CONFIG_ACPI_HOTPLUG_CPU is not set
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+CONFIG_SCSI_QLOGIC_FC=y
+# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_MAX_SGE=40
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_NETLINK_DEV=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+# CONFIG_E100_NAPI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+CONFIG_GAMEPORT=m
+CONFIG_SOUND_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_VORTEX is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_GAMEPORT_CS461X is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_MAX_RAW_DEVS=256
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_RW_DETECT is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_TMPFS_SECURITY=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
new file mode 100644
index 000000000000..21d6f9bab5e9
--- /dev/null
+++ b/arch/ia64/configs/zx1_defconfig
@@ -0,0 +1,1273 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10
+# Wed Dec 29 09:05:48 2004
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+CONFIG_IA64_HP_ZX1=y
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+# CONFIG_NUMA is not set
+CONFIG_VIRTUAL_MEM_MAP=y
+# CONFIG_IA64_CYCLONE is not set
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+CONFIG_ACPI=y
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=y
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_MAX_SGE=40
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+CONFIG_IP_NF_ARPTABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+CONFIG_TULIP_MWI=y
+CONFIG_TULIP_MMIO=y
+CONFIG_TULIP_NAPI=y
+CONFIG_TULIP_NAPI_HW_MITIGATION=y
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_E100_NAPI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=y
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=y
+CONFIG_AGP_HP_ZX1=y
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_GAMMA is not set
+# CONFIG_DRM_R128 is not set
+CONFIG_DRM_RADEON=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCF=y
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_ZR36120 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_DEBUG=y
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=y
+CONFIG_SND_OPL3_LIB=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=y
+CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VX222 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_BANDWIDTH=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_MIDI is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_RW_DETECT is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_TMPFS_SECURITY=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+CONFIG_IA64_PRINT_HAZARDS=y
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
new file mode 100644
index 000000000000..7539e83bf054
--- /dev/null
+++ b/arch/ia64/defconfig
@@ -0,0 +1,1199 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10
+# Thu Jan 6 11:13:13 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_DISCONTIGMEM=y
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_PREEMPT is not set
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_ACPI_DEALLOCATE_IRQ=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+CONFIG_ACPI=y
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SGIIOC4=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+CONFIG_SCSI_QLOGIC_FC=y
+# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_MAX_SGE=40
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_NETLINK_DEV=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=m
+# CONFIG_EEPRO100_PIO is not set
+CONFIG_E100=m
+# CONFIG_E100_NAPI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+CONFIG_GAMEPORT=m
+CONFIG_SOUND_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_VORTEX is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_GAMEPORT_CS461x is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_SNSC=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_MMTIMER=y
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+
+#
+# PCI devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_EMU10K1=m
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VX222 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_MIDI is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_RW_DETECT is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_TMPFS_SECURITY=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/dig/Makefile b/arch/ia64/dig/Makefile
new file mode 100644
index 000000000000..971cd7870dd4
--- /dev/null
+++ b/arch/ia64/dig/Makefile
@@ -0,0 +1,9 @@
+#
+# ia64/platform/dig/Makefile
+#
+# Copyright (C) 1999 Silicon Graphics, Inc.
+# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
+#
+
+obj-y := setup.o
+obj-$(CONFIG_IA64_GENERIC) += machvec.o
diff --git a/arch/ia64/dig/machvec.c b/arch/ia64/dig/machvec.c
new file mode 100644
index 000000000000..0c55bdafb473
--- /dev/null
+++ b/arch/ia64/dig/machvec.c
@@ -0,0 +1,3 @@
+#define MACHVEC_PLATFORM_NAME dig
+#define MACHVEC_PLATFORM_HEADER <asm/machvec_dig.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/dig/setup.c b/arch/ia64/dig/setup.c
new file mode 100644
index 000000000000..d58003f1ad02
--- /dev/null
+++ b/arch/ia64/dig/setup.c
@@ -0,0 +1,86 @@
+/*
+ * Platform dependent support for DIG64 platforms.
+ *
+ * Copyright (C) 1999 Intel Corp.
+ * Copyright (C) 1999, 2001 Hewlett-Packard Co
+ * Copyright (C) 1999, 2001, 2003 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
+ */
+#include <linux/config.h>
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/root_dev.h>
+
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/system.h>
+
+/*
+ * This is here so we can use the CMOS detection in ide-probe.c to
+ * determine what drives are present. In theory, we don't need this
+ * as the auto-detection could be done via ide-probe.c:do_probe() but
+ * in practice that would be much slower, which is painful when
+ * running in the simulator. Note that passing zeroes in DRIVE_INFO
+ * is sufficient (the IDE driver will autodetect the drive geometry).
+ */
+char drive_info[4*16];
+
+void __init
+dig_setup (char **cmdline_p)
+{
+ unsigned int orig_x, orig_y, num_cols, num_rows, font_height;
+
+ /*
+ * Default to /dev/sda2. This assumes that the EFI partition
+ * is physical disk 1 partition 1 and the Linux root disk is
+ * physical disk 1 partition 2.
+ */
+ ROOT_DEV = Root_SDA2; /* default to second partition on first drive */
+
+#ifdef CONFIG_SMP
+ init_smp_config();
+#endif
+
+ memset(&screen_info, 0, sizeof(screen_info));
+
+ if (!ia64_boot_param->console_info.num_rows
+ || !ia64_boot_param->console_info.num_cols)
+ {
+ printk(KERN_WARNING "dig_setup: warning: invalid screen-info, guessing 80x25\n");
+ orig_x = 0;
+ orig_y = 0;
+ num_cols = 80;
+ num_rows = 25;
+ font_height = 16;
+ } else {
+ orig_x = ia64_boot_param->console_info.orig_x;
+ orig_y = ia64_boot_param->console_info.orig_y;
+ num_cols = ia64_boot_param->console_info.num_cols;
+ num_rows = ia64_boot_param->console_info.num_rows;
+ font_height = 400 / num_rows;
+ }
+
+ screen_info.orig_x = orig_x;
+ screen_info.orig_y = orig_y;
+ screen_info.orig_video_cols = num_cols;
+ screen_info.orig_video_lines = num_rows;
+ screen_info.orig_video_points = font_height;
+ screen_info.orig_video_mode = 3; /* XXX fake */
+ screen_info.orig_video_isVGA = 1; /* XXX fake */
+ screen_info.orig_video_ega_bx = 3; /* XXX fake */
+}
+
+void __init
+dig_irq_init (void)
+{
+}
diff --git a/arch/ia64/hp/common/Makefile b/arch/ia64/hp/common/Makefile
new file mode 100644
index 000000000000..f61a60057ff7
--- /dev/null
+++ b/arch/ia64/hp/common/Makefile
@@ -0,0 +1,10 @@
+#
+# ia64/platform/hp/common/Makefile
+#
+# Copyright (C) 2002 Hewlett Packard
+# Copyright (C) Alex Williamson (alex_williamson@hp.com)
+#
+
+obj-y := sba_iommu.o
+obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += hwsw_iommu.o
+obj-$(CONFIG_IA64_GENERIC) += hwsw_iommu.o
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
new file mode 100644
index 000000000000..80f8ef013939
--- /dev/null
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2004 Hewlett-Packard Development Company, L.P.
+ * Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * This is a pseudo I/O MMU which dispatches to the hardware I/O MMU
+ * whenever possible. We assume that the hardware I/O MMU requires
+ * full 32-bit addressability, as is the case, e.g., for HP zx1-based
+ * systems (there, the I/O MMU window is mapped at 3-4GB). If a
+ * device doesn't provide full 32-bit addressability, we fall back on
+ * the sw I/O TLB. This is good enough to let us support broken
+ * hardware such as soundcards which have a DMA engine that can
+ * address only 28 bits.
+ */
+
+#include <linux/device.h>
+
+#include <asm/machvec.h>
+
+/* swiotlb declarations & definitions: */
+extern void swiotlb_init_with_default_size (size_t size);
+extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
+extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
+extern ia64_mv_dma_map_single swiotlb_map_single;
+extern ia64_mv_dma_unmap_single swiotlb_unmap_single;
+extern ia64_mv_dma_map_sg swiotlb_map_sg;
+extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg;
+extern ia64_mv_dma_supported swiotlb_dma_supported;
+extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error;
+
+/* hwiommu declarations & definitions: */
+
+extern ia64_mv_dma_alloc_coherent sba_alloc_coherent;
+extern ia64_mv_dma_free_coherent sba_free_coherent;
+extern ia64_mv_dma_map_single sba_map_single;
+extern ia64_mv_dma_unmap_single sba_unmap_single;
+extern ia64_mv_dma_map_sg sba_map_sg;
+extern ia64_mv_dma_unmap_sg sba_unmap_sg;
+extern ia64_mv_dma_supported sba_dma_supported;
+extern ia64_mv_dma_mapping_error sba_dma_mapping_error;
+
+#define hwiommu_alloc_coherent sba_alloc_coherent
+#define hwiommu_free_coherent sba_free_coherent
+#define hwiommu_map_single sba_map_single
+#define hwiommu_unmap_single sba_unmap_single
+#define hwiommu_map_sg sba_map_sg
+#define hwiommu_unmap_sg sba_unmap_sg
+#define hwiommu_dma_supported sba_dma_supported
+#define hwiommu_dma_mapping_error sba_dma_mapping_error
+#define hwiommu_sync_single_for_cpu machvec_dma_sync_single
+#define hwiommu_sync_sg_for_cpu machvec_dma_sync_sg
+#define hwiommu_sync_single_for_device machvec_dma_sync_single
+#define hwiommu_sync_sg_for_device machvec_dma_sync_sg
+
+
+/*
+ * Note: we need to make the determination of whether or not to use
+ * the sw I/O TLB based purely on the device structure. Anything else
+ * would be unreliable or would be too intrusive.
+ */
+static inline int
+use_swiotlb (struct device *dev)
+{
+ return dev && dev->dma_mask && !hwiommu_dma_supported(dev, *dev->dma_mask);
+}
+
+void
+hwsw_init (void)
+{
+ /* default to a smallish 2MB sw I/O TLB */
+ swiotlb_init_with_default_size (2 * (1<<20));
+}
+
+void *
+hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+{
+ if (use_swiotlb(dev))
+ return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
+ else
+ return hwiommu_alloc_coherent(dev, size, dma_handle, flags);
+}
+
+void
+hwsw_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+ if (use_swiotlb(dev))
+ swiotlb_free_coherent(dev, size, vaddr, dma_handle);
+ else
+ hwiommu_free_coherent(dev, size, vaddr, dma_handle);
+}
+
+dma_addr_t
+hwsw_map_single (struct device *dev, void *addr, size_t size, int dir)
+{
+ if (use_swiotlb(dev))
+ return swiotlb_map_single(dev, addr, size, dir);
+ else
+ return hwiommu_map_single(dev, addr, size, dir);
+}
+
+void
+hwsw_unmap_single (struct device *dev, dma_addr_t iova, size_t size, int dir)
+{
+ if (use_swiotlb(dev))
+ return swiotlb_unmap_single(dev, iova, size, dir);
+ else
+ return hwiommu_unmap_single(dev, iova, size, dir);
+}
+
+
+int
+hwsw_map_sg (struct device *dev, struct scatterlist *sglist, int nents, int dir)
+{
+ if (use_swiotlb(dev))
+ return swiotlb_map_sg(dev, sglist, nents, dir);
+ else
+ return hwiommu_map_sg(dev, sglist, nents, dir);
+}
+
+void
+hwsw_unmap_sg (struct device *dev, struct scatterlist *sglist, int nents, int dir)
+{
+ if (use_swiotlb(dev))
+ return swiotlb_unmap_sg(dev, sglist, nents, dir);
+ else
+ return hwiommu_unmap_sg(dev, sglist, nents, dir);
+}
+
+void
+hwsw_sync_single_for_cpu (struct device *dev, dma_addr_t addr, size_t size, int dir)
+{
+ if (use_swiotlb(dev))
+ swiotlb_sync_single_for_cpu(dev, addr, size, dir);
+ else
+ hwiommu_sync_single_for_cpu(dev, addr, size, dir);
+}
+
+void
+hwsw_sync_sg_for_cpu (struct device *dev, struct scatterlist *sg, int nelems, int dir)
+{
+ if (use_swiotlb(dev))
+ swiotlb_sync_sg_for_cpu(dev, sg, nelems, dir);
+ else
+ hwiommu_sync_sg_for_cpu(dev, sg, nelems, dir);
+}
+
+void
+hwsw_sync_single_for_device (struct device *dev, dma_addr_t addr, size_t size, int dir)
+{
+ if (use_swiotlb(dev))
+ swiotlb_sync_single_for_device(dev, addr, size, dir);
+ else
+ hwiommu_sync_single_for_device(dev, addr, size, dir);
+}
+
+void
+hwsw_sync_sg_for_device (struct device *dev, struct scatterlist *sg, int nelems, int dir)
+{
+ if (use_swiotlb(dev))
+ swiotlb_sync_sg_for_device(dev, sg, nelems, dir);
+ else
+ hwiommu_sync_sg_for_device(dev, sg, nelems, dir);
+}
+
+int
+hwsw_dma_supported (struct device *dev, u64 mask)
+{
+ if (hwiommu_dma_supported(dev, mask))
+ return 1;
+ return swiotlb_dma_supported(dev, mask);
+}
+
+int
+hwsw_dma_mapping_error (dma_addr_t dma_addr)
+{
+ return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr);
+}
+
+EXPORT_SYMBOL(hwsw_dma_mapping_error);
+EXPORT_SYMBOL(hwsw_map_single);
+EXPORT_SYMBOL(hwsw_unmap_single);
+EXPORT_SYMBOL(hwsw_map_sg);
+EXPORT_SYMBOL(hwsw_unmap_sg);
+EXPORT_SYMBOL(hwsw_dma_supported);
+EXPORT_SYMBOL(hwsw_alloc_coherent);
+EXPORT_SYMBOL(hwsw_free_coherent);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
new file mode 100644
index 000000000000..017c9ab5fc1b
--- /dev/null
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -0,0 +1,2121 @@
+/*
+** IA64 System Bus Adapter (SBA) I/O MMU manager
+**
+** (c) Copyright 2002-2004 Alex Williamson
+** (c) Copyright 2002-2003 Grant Grundler
+** (c) Copyright 2002-2004 Hewlett-Packard Company
+**
+** Portions (c) 2000 Grant Grundler (from parisc I/O MMU code)
+** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+**
+** This module initializes the IOC (I/O Controller) found on HP
+** McKinley machines and their successors.
+**
+*/
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/nodemask.h>
+#include <linux/bitops.h> /* hweight64() */
+
+#include <asm/delay.h> /* ia64_get_itc() */
+#include <asm/io.h>
+#include <asm/page.h> /* PAGE_OFFSET */
+#include <asm/dma.h>
+#include <asm/system.h> /* wmb() */
+
+#include <asm/acpi-ext.h>
+
+#define PFX "IOC: "
+
+/*
+** Enabling timing search of the pdir resource map. Output in /proc.
+** Disabled by default to optimize performance.
+*/
+#undef PDIR_SEARCH_TIMING
+
+/*
+** This option allows cards capable of 64bit DMA to bypass the IOMMU. If
+** not defined, all DMA will be 32bit and go through the TLB.
+** There's potentially a conflict in the bio merge code with us
+** advertising an iommu, but then bypassing it. Since I/O MMU bypassing
+** appears to give more performance than bio-level virtual merging, we'll
+** do the former for now. NOTE: BYPASS_SG also needs to be undef'd to
+** completely restrict DMA to the IOMMU.
+*/
+#define ALLOW_IOV_BYPASS
+
+/*
+** This option specifically allows/disallows bypassing scatterlists with
+** multiple entries. Coalescing these entries can allow better DMA streaming
+** and in some cases shows better performance than entirely bypassing the
+** IOMMU. Performance increase on the order of 1-2% sequential output/input
+** using bonnie++ on a RAID0 MD device (sym2 & mpt).
+*/
+#undef ALLOW_IOV_BYPASS_SG
+
+/*
+** If a device prefetches beyond the end of a valid pdir entry, it will cause
+** a hard failure, ie. MCA. Version 3.0 and later of the zx1 LBA should
+** disconnect on 4k boundaries and prevent such issues. If the device is
+** particularly agressive, this option will keep the entire pdir valid such
+** that prefetching will hit a valid address. This could severely impact
+** error containment, and is therefore off by default. The page that is
+** used for spill-over is poisoned, so that should help debugging somewhat.
+*/
+#undef FULL_VALID_PDIR
+
+#define ENABLE_MARK_CLEAN
+
+/*
+** The number of debug flags is a clue - this code is fragile. NOTE: since
+** tightening the use of res_lock the resource bitmap and actual pdir are no
+** longer guaranteed to stay in sync. The sanity checking code isn't going to
+** like that.
+*/
+#undef DEBUG_SBA_INIT
+#undef DEBUG_SBA_RUN
+#undef DEBUG_SBA_RUN_SG
+#undef DEBUG_SBA_RESOURCE
+#undef ASSERT_PDIR_SANITY
+#undef DEBUG_LARGE_SG_ENTRIES
+#undef DEBUG_BYPASS
+
+#if defined(FULL_VALID_PDIR) && defined(ASSERT_PDIR_SANITY)
+#error FULL_VALID_PDIR and ASSERT_PDIR_SANITY are mutually exclusive
+#endif
+
+#define SBA_INLINE __inline__
+/* #define SBA_INLINE */
+
+#ifdef DEBUG_SBA_INIT
+#define DBG_INIT(x...) printk(x)
+#else
+#define DBG_INIT(x...)
+#endif
+
+#ifdef DEBUG_SBA_RUN
+#define DBG_RUN(x...) printk(x)
+#else
+#define DBG_RUN(x...)
+#endif
+
+#ifdef DEBUG_SBA_RUN_SG
+#define DBG_RUN_SG(x...) printk(x)
+#else
+#define DBG_RUN_SG(x...)
+#endif
+
+
+#ifdef DEBUG_SBA_RESOURCE
+#define DBG_RES(x...) printk(x)
+#else
+#define DBG_RES(x...)
+#endif
+
+#ifdef DEBUG_BYPASS
+#define DBG_BYPASS(x...) printk(x)
+#else
+#define DBG_BYPASS(x...)
+#endif
+
+#ifdef ASSERT_PDIR_SANITY
+#define ASSERT(expr) \
+ if(!(expr)) { \
+ printk( "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
+ panic(#expr); \
+ }
+#else
+#define ASSERT(expr)
+#endif
+
+/*
+** The number of pdir entries to "free" before issuing
+** a read to PCOM register to flush out PCOM writes.
+** Interacts with allocation granularity (ie 4 or 8 entries
+** allocated and free'd/purged at a time might make this
+** less interesting).
+*/
+#define DELAYED_RESOURCE_CNT 64
+
+#define ZX1_IOC_ID ((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP)
+#define ZX2_IOC_ID ((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP)
+#define REO_IOC_ID ((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP)
+#define SX1000_IOC_ID ((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP)
+
+#define ZX1_IOC_OFFSET 0x1000 /* ACPI reports SBA, we want IOC */
+
+#define IOC_FUNC_ID 0x000
+#define IOC_FCLASS 0x008 /* function class, bist, header, rev... */
+#define IOC_IBASE 0x300 /* IO TLB */
+#define IOC_IMASK 0x308
+#define IOC_PCOM 0x310
+#define IOC_TCNFG 0x318
+#define IOC_PDIR_BASE 0x320
+
+#define IOC_ROPE0_CFG 0x500
+#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */
+
+
+/* AGP GART driver looks for this */
+#define ZX1_SBA_IOMMU_COOKIE 0x0000badbadc0ffeeUL
+
+/*
+** The zx1 IOC supports 4/8/16/64KB page sizes (see TCNFG register)
+**
+** Some IOCs (sx1000) can run at the above pages sizes, but are
+** really only supported using the IOC at a 4k page size.
+**
+** iovp_size could only be greater than PAGE_SIZE if we are
+** confident the drivers really only touch the next physical
+** page iff that driver instance owns it.
+*/
+static unsigned long iovp_size;
+static unsigned long iovp_shift;
+static unsigned long iovp_mask;
+
+struct ioc {
+ void __iomem *ioc_hpa; /* I/O MMU base address */
+ char *res_map; /* resource map, bit == pdir entry */
+ u64 *pdir_base; /* physical base address */
+ unsigned long ibase; /* pdir IOV Space base */
+ unsigned long imask; /* pdir IOV Space mask */
+
+ unsigned long *res_hint; /* next avail IOVP - circular search */
+ unsigned long dma_mask;
+ spinlock_t res_lock; /* protects the resource bitmap, but must be held when */
+ /* clearing pdir to prevent races with allocations. */
+ unsigned int res_bitshift; /* from the RIGHT! */
+ unsigned int res_size; /* size of resource map in bytes */
+#ifdef CONFIG_NUMA
+ unsigned int node; /* node where this IOC lives */
+#endif
+#if DELAYED_RESOURCE_CNT > 0
+ spinlock_t saved_lock; /* may want to try to get this on a separate cacheline */
+ /* than res_lock for bigger systems. */
+ int saved_cnt;
+ struct sba_dma_pair {
+ dma_addr_t iova;
+ size_t size;
+ } saved[DELAYED_RESOURCE_CNT];
+#endif
+
+#ifdef PDIR_SEARCH_TIMING
+#define SBA_SEARCH_SAMPLE 0x100
+ unsigned long avg_search[SBA_SEARCH_SAMPLE];
+ unsigned long avg_idx; /* current index into avg_search */
+#endif
+
+ /* Stuff we don't need in performance path */
+ struct ioc *next; /* list of IOC's in system */
+ acpi_handle handle; /* for multiple IOC's */
+ const char *name;
+ unsigned int func_id;
+ unsigned int rev; /* HW revision of chip */
+ u32 iov_size;
+ unsigned int pdir_size; /* in bytes, determined by IOV Space size */
+ struct pci_dev *sac_only_dev;
+};
+
+static struct ioc *ioc_list;
+static int reserve_sba_gart = 1;
+
+static SBA_INLINE void sba_mark_invalid(struct ioc *, dma_addr_t, size_t);
+static SBA_INLINE void sba_free_range(struct ioc *, dma_addr_t, size_t);
+
+#define sba_sg_address(sg) (page_address((sg)->page) + (sg)->offset)
+
+#ifdef FULL_VALID_PDIR
+static u64 prefetch_spill_page;
+#endif
+
+#ifdef CONFIG_PCI
+# define GET_IOC(dev) (((dev)->bus == &pci_bus_type) \
+ ? ((struct ioc *) PCI_CONTROLLER(to_pci_dev(dev))->iommu) : NULL)
+#else
+# define GET_IOC(dev) NULL
+#endif
+
+/*
+** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
+** (or rather not merge) DMA's into managable chunks.
+** On parisc, this is more of the software/tuning constraint
+** rather than the HW. I/O MMU allocation alogorithms can be
+** faster with smaller size is (to some degree).
+*/
+#define DMA_CHUNK_SIZE (BITS_PER_LONG*iovp_size)
+
+#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
+
+/************************************
+** SBA register read and write support
+**
+** BE WARNED: register writes are posted.
+** (ie follow writes which must reach HW with a read)
+**
+*/
+#define READ_REG(addr) __raw_readq(addr)
+#define WRITE_REG(val, addr) __raw_writeq(val, addr)
+
+#ifdef DEBUG_SBA_INIT
+
+/**
+ * sba_dump_tlb - debugging only - print IOMMU operating parameters
+ * @hpa: base address of the IOMMU
+ *
+ * Print the size/location of the IO MMU PDIR.
+ */
+static void
+sba_dump_tlb(char *hpa)
+{
+ DBG_INIT("IO TLB at 0x%p\n", (void *)hpa);
+ DBG_INIT("IOC_IBASE : %016lx\n", READ_REG(hpa+IOC_IBASE));
+ DBG_INIT("IOC_IMASK : %016lx\n", READ_REG(hpa+IOC_IMASK));
+ DBG_INIT("IOC_TCNFG : %016lx\n", READ_REG(hpa+IOC_TCNFG));
+ DBG_INIT("IOC_PDIR_BASE: %016lx\n", READ_REG(hpa+IOC_PDIR_BASE));
+ DBG_INIT("\n");
+}
+#endif
+
+
+#ifdef ASSERT_PDIR_SANITY
+
+/**
+ * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @msg: text to print ont the output line.
+ * @pide: pdir index.
+ *
+ * Print one entry of the IO MMU PDIR in human readable form.
+ */
+static void
+sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
+{
+ /* start printing from lowest pde in rval */
+ u64 *ptr = &ioc->pdir_base[pide & ~(BITS_PER_LONG - 1)];
+ unsigned long *rptr = (unsigned long *) &ioc->res_map[(pide >>3) & -sizeof(unsigned long)];
+ uint rcnt;
+
+ printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
+ msg, rptr, pide & (BITS_PER_LONG - 1), *rptr);
+
+ rcnt = 0;
+ while (rcnt < BITS_PER_LONG) {
+ printk(KERN_DEBUG "%s %2d %p %016Lx\n",
+ (rcnt == (pide & (BITS_PER_LONG - 1)))
+ ? " -->" : " ",
+ rcnt, ptr, (unsigned long long) *ptr );
+ rcnt++;
+ ptr++;
+ }
+ printk(KERN_DEBUG "%s", msg);
+}
+
+
+/**
+ * sba_check_pdir - debugging only - consistency checker
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @msg: text to print ont the output line.
+ *
+ * Verify the resource map and pdir state is consistent
+ */
+static int
+sba_check_pdir(struct ioc *ioc, char *msg)
+{
+ u64 *rptr_end = (u64 *) &(ioc->res_map[ioc->res_size]);
+ u64 *rptr = (u64 *) ioc->res_map; /* resource map ptr */
+ u64 *pptr = ioc->pdir_base; /* pdir ptr */
+ uint pide = 0;
+
+ while (rptr < rptr_end) {
+ u64 rval;
+ int rcnt; /* number of bits we might check */
+
+ rval = *rptr;
+ rcnt = 64;
+
+ while (rcnt) {
+ /* Get last byte and highest bit from that */
+ u32 pde = ((u32)((*pptr >> (63)) & 0x1));
+ if ((rval & 0x1) ^ pde)
+ {
+ /*
+ ** BUMMER! -- res_map != pdir --
+ ** Dump rval and matching pdir entries
+ */
+ sba_dump_pdir_entry(ioc, msg, pide);
+ return(1);
+ }
+ rcnt--;
+ rval >>= 1; /* try the next bit */
+ pptr++;
+ pide++;
+ }
+ rptr++; /* look at next word of res_map */
+ }
+ /* It'd be nice if we always got here :^) */
+ return 0;
+}
+
+
+/**
+ * sba_dump_sg - debugging only - print Scatter-Gather list
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @startsg: head of the SG list
+ * @nents: number of entries in SG list
+ *
+ * print the SG list so we can verify it's correct by hand.
+ */
+static void
+sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
+{
+ while (nents-- > 0) {
+ printk(KERN_DEBUG " %d : DMA %08lx/%05x CPU %p\n", nents,
+ startsg->dma_address, startsg->dma_length,
+ sba_sg_address(startsg));
+ startsg++;
+ }
+}
+
+static void
+sba_check_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
+{
+ struct scatterlist *the_sg = startsg;
+ int the_nents = nents;
+
+ while (the_nents-- > 0) {
+ if (sba_sg_address(the_sg) == 0x0UL)
+ sba_dump_sg(NULL, startsg, nents);
+ the_sg++;
+ }
+}
+
+#endif /* ASSERT_PDIR_SANITY */
+
+
+
+
+/**************************************************************
+*
+* I/O Pdir Resource Management
+*
+* Bits set in the resource map are in use.
+* Each bit can represent a number of pages.
+* LSbs represent lower addresses (IOVA's).
+*
+***************************************************************/
+#define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */
+
+/* Convert from IOVP to IOVA and vice versa. */
+#define SBA_IOVA(ioc,iovp,offset) ((ioc->ibase) | (iovp) | (offset))
+#define SBA_IOVP(ioc,iova) ((iova) & ~(ioc->ibase))
+
+#define PDIR_ENTRY_SIZE sizeof(u64)
+
+#define PDIR_INDEX(iovp) ((iovp)>>iovp_shift)
+
+#define RESMAP_MASK(n) ~(~0UL << (n))
+#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
+
+
+/**
+ * For most cases the normal get_order is sufficient, however it limits us
+ * to PAGE_SIZE being the minimum mapping alignment and TC flush granularity.
+ * It only incurs about 1 clock cycle to use this one with the static variable
+ * and makes the code more intuitive.
+ */
+static SBA_INLINE int
+get_iovp_order (unsigned long size)
+{
+ long double d = size - 1;
+ long order;
+
+ order = ia64_getf_exp(d);
+ order = order - iovp_shift - 0xffff + 1;
+ if (order < 0)
+ order = 0;
+ return order;
+}
+
+/**
+ * sba_search_bitmap - find free space in IO PDIR resource bitmap
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @bits_wanted: number of entries we need.
+ *
+ * Find consecutive free bits in resource bitmap.
+ * Each bit represents one entry in the IO Pdir.
+ * Cool perf optimization: search for log2(size) bits at a time.
+ */
+static SBA_INLINE unsigned long
+sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
+{
+ unsigned long *res_ptr = ioc->res_hint;
+ unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
+ unsigned long pide = ~0UL;
+
+ ASSERT(((unsigned long) ioc->res_hint & (sizeof(unsigned long) - 1UL)) == 0);
+ ASSERT(res_ptr < res_end);
+
+ /*
+ * N.B. REO/Grande defect AR2305 can cause TLB fetch timeouts
+ * if a TLB entry is purged while in use. sba_mark_invalid()
+ * purges IOTLB entries in power-of-two sizes, so we also
+ * allocate IOVA space in power-of-two sizes.
+ */
+ bits_wanted = 1UL << get_iovp_order(bits_wanted << iovp_shift);
+
+ if (likely(bits_wanted == 1)) {
+ unsigned int bitshiftcnt;
+ for(; res_ptr < res_end ; res_ptr++) {
+ if (likely(*res_ptr != ~0UL)) {
+ bitshiftcnt = ffz(*res_ptr);
+ *res_ptr |= (1UL << bitshiftcnt);
+ pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
+ pide <<= 3; /* convert to bit address */
+ pide += bitshiftcnt;
+ ioc->res_bitshift = bitshiftcnt + bits_wanted;
+ goto found_it;
+ }
+ }
+ goto not_found;
+
+ }
+
+ if (likely(bits_wanted <= BITS_PER_LONG/2)) {
+ /*
+ ** Search the resource bit map on well-aligned values.
+ ** "o" is the alignment.
+ ** We need the alignment to invalidate I/O TLB using
+ ** SBA HW features in the unmap path.
+ */
+ unsigned long o = 1 << get_iovp_order(bits_wanted << iovp_shift);
+ uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
+ unsigned long mask, base_mask;
+
+ base_mask = RESMAP_MASK(bits_wanted);
+ mask = base_mask << bitshiftcnt;
+
+ DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
+ for(; res_ptr < res_end ; res_ptr++)
+ {
+ DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
+ ASSERT(0 != mask);
+ for (; mask ; mask <<= o, bitshiftcnt += o) {
+ if(0 == ((*res_ptr) & mask)) {
+ *res_ptr |= mask; /* mark resources busy! */
+ pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
+ pide <<= 3; /* convert to bit address */
+ pide += bitshiftcnt;
+ ioc->res_bitshift = bitshiftcnt + bits_wanted;
+ goto found_it;
+ }
+ }
+
+ bitshiftcnt = 0;
+ mask = base_mask;
+
+ }
+
+ } else {
+ int qwords, bits, i;
+ unsigned long *end;
+
+ qwords = bits_wanted >> 6; /* /64 */
+ bits = bits_wanted - (qwords * BITS_PER_LONG);
+
+ end = res_end - qwords;
+
+ for (; res_ptr < end; res_ptr++) {
+ for (i = 0 ; i < qwords ; i++) {
+ if (res_ptr[i] != 0)
+ goto next_ptr;
+ }
+ if (bits && res_ptr[i] && (__ffs(res_ptr[i]) < bits))
+ continue;
+
+ /* Found it, mark it */
+ for (i = 0 ; i < qwords ; i++)
+ res_ptr[i] = ~0UL;
+ res_ptr[i] |= RESMAP_MASK(bits);
+
+ pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
+ pide <<= 3; /* convert to bit address */
+ res_ptr += qwords;
+ ioc->res_bitshift = bits;
+ goto found_it;
+next_ptr:
+ ;
+ }
+ }
+
+not_found:
+ prefetch(ioc->res_map);
+ ioc->res_hint = (unsigned long *) ioc->res_map;
+ ioc->res_bitshift = 0;
+ return (pide);
+
+found_it:
+ ioc->res_hint = res_ptr;
+ return (pide);
+}
+
+
+/**
+ * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @size: number of bytes to create a mapping for
+ *
+ * Given a size, find consecutive unmarked and then mark those bits in the
+ * resource bit map.
+ */
+static int
+sba_alloc_range(struct ioc *ioc, size_t size)
+{
+ unsigned int pages_needed = size >> iovp_shift;
+#ifdef PDIR_SEARCH_TIMING
+ unsigned long itc_start;
+#endif
+ unsigned long pide;
+ unsigned long flags;
+
+ ASSERT(pages_needed);
+ ASSERT(0 == (size & ~iovp_mask));
+
+ spin_lock_irqsave(&ioc->res_lock, flags);
+
+#ifdef PDIR_SEARCH_TIMING
+ itc_start = ia64_get_itc();
+#endif
+ /*
+ ** "seek and ye shall find"...praying never hurts either...
+ */
+ pide = sba_search_bitmap(ioc, pages_needed);
+ if (unlikely(pide >= (ioc->res_size << 3))) {
+ pide = sba_search_bitmap(ioc, pages_needed);
+ if (unlikely(pide >= (ioc->res_size << 3))) {
+#if DELAYED_RESOURCE_CNT > 0
+ /*
+ ** With delayed resource freeing, we can give this one more shot. We're
+ ** getting close to being in trouble here, so do what we can to make this
+ ** one count.
+ */
+ spin_lock(&ioc->saved_lock);
+ if (ioc->saved_cnt > 0) {
+ struct sba_dma_pair *d;
+ int cnt = ioc->saved_cnt;
+
+ d = &(ioc->saved[ioc->saved_cnt]);
+
+ while (cnt--) {
+ sba_mark_invalid(ioc, d->iova, d->size);
+ sba_free_range(ioc, d->iova, d->size);
+ d--;
+ }
+ ioc->saved_cnt = 0;
+ READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
+ }
+ spin_unlock(&ioc->saved_lock);
+
+ pide = sba_search_bitmap(ioc, pages_needed);
+ if (unlikely(pide >= (ioc->res_size << 3)))
+ panic(__FILE__ ": I/O MMU @ %p is out of mapping resources\n",
+ ioc->ioc_hpa);
+#else
+ panic(__FILE__ ": I/O MMU @ %p is out of mapping resources\n",
+ ioc->ioc_hpa);
+#endif
+ }
+ }
+
+#ifdef PDIR_SEARCH_TIMING
+ ioc->avg_search[ioc->avg_idx++] = (ia64_get_itc() - itc_start) / pages_needed;
+ ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
+#endif
+
+ prefetchw(&(ioc->pdir_base[pide]));
+
+#ifdef ASSERT_PDIR_SANITY
+ /* verify the first enable bit is clear */
+ if(0x00 != ((u8 *) ioc->pdir_base)[pide*PDIR_ENTRY_SIZE + 7]) {
+ sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
+ }
+#endif
+
+ DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
+ __FUNCTION__, size, pages_needed, pide,
+ (uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
+ ioc->res_bitshift );
+
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+ return (pide);
+}
+
+
+/**
+ * sba_free_range - unmark bits in IO PDIR resource bitmap
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @iova: IO virtual address which was previously allocated.
+ * @size: number of bytes to create a mapping for
+ *
+ * clear bits in the ioc's resource map
+ */
+static SBA_INLINE void
+sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
+{
+ unsigned long iovp = SBA_IOVP(ioc, iova);
+ unsigned int pide = PDIR_INDEX(iovp);
+ unsigned int ridx = pide >> 3; /* convert bit to byte address */
+ unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
+ int bits_not_wanted = size >> iovp_shift;
+ unsigned long m;
+
+ /* Round up to power-of-two size: see AR2305 note above */
+ bits_not_wanted = 1UL << get_iovp_order(bits_not_wanted << iovp_shift);
+ for (; bits_not_wanted > 0 ; res_ptr++) {
+
+ if (unlikely(bits_not_wanted > BITS_PER_LONG)) {
+
+ /* these mappings start 64bit aligned */
+ *res_ptr = 0UL;
+ bits_not_wanted -= BITS_PER_LONG;
+ pide += BITS_PER_LONG;
+
+ } else {
+
+ /* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
+ m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
+ bits_not_wanted = 0;
+
+ DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __FUNCTION__, (uint) iova, size,
+ bits_not_wanted, m, pide, res_ptr, *res_ptr);
+
+ ASSERT(m != 0);
+ ASSERT(bits_not_wanted);
+ ASSERT((*res_ptr & m) == m); /* verify same bits are set */
+ *res_ptr &= ~m;
+ }
+ }
+}
+
+
+/**************************************************************
+*
+* "Dynamic DMA Mapping" support (aka "Coherent I/O")
+*
+***************************************************************/
+
+/**
+ * sba_io_pdir_entry - fill in one IO PDIR entry
+ * @pdir_ptr: pointer to IO PDIR entry
+ * @vba: Virtual CPU address of buffer to map
+ *
+ * SBA Mapping Routine
+ *
+ * Given a virtual address (vba, arg1) sba_io_pdir_entry()
+ * loads the I/O PDIR entry pointed to by pdir_ptr (arg0).
+ * Each IO Pdir entry consists of 8 bytes as shown below
+ * (LSB == bit 0):
+ *
+ * 63 40 11 7 0
+ * +-+---------------------+----------------------------------+----+--------+
+ * |V| U | PPN[39:12] | U | FF |
+ * +-+---------------------+----------------------------------+----+--------+
+ *
+ * V == Valid Bit
+ * U == Unused
+ * PPN == Physical Page Number
+ *
+ * The physical address fields are filled with the results of virt_to_phys()
+ * on the vba.
+ */
+
+#if 1
+#define sba_io_pdir_entry(pdir_ptr, vba) *pdir_ptr = ((vba & ~0xE000000000000FFFULL) \
+ | 0x8000000000000000ULL)
+#else
+void SBA_INLINE
+sba_io_pdir_entry(u64 *pdir_ptr, unsigned long vba)
+{
+ *pdir_ptr = ((vba & ~0xE000000000000FFFULL) | 0x80000000000000FFULL);
+}
+#endif
+
+#ifdef ENABLE_MARK_CLEAN
+/**
+ * Since DMA is i-cache coherent, any (complete) pages that were written via
+ * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
+ * flush them when they get mapped into an executable vm-area.
+ */
+static void
+mark_clean (void *addr, size_t size)
+{
+ unsigned long pg_addr, end;
+
+ pg_addr = PAGE_ALIGN((unsigned long) addr);
+ end = (unsigned long) addr + size;
+ while (pg_addr + PAGE_SIZE <= end) {
+ struct page *page = virt_to_page((void *)pg_addr);
+ set_bit(PG_arch_1, &page->flags);
+ pg_addr += PAGE_SIZE;
+ }
+}
+#endif
+
+/**
+ * sba_mark_invalid - invalidate one or more IO PDIR entries
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @iova: IO Virtual Address mapped earlier
+ * @byte_cnt: number of bytes this mapping covers.
+ *
+ * Marking the IO PDIR entry(ies) as Invalid and invalidate
+ * corresponding IO TLB entry. The PCOM (Purge Command Register)
+ * is to purge stale entries in the IO TLB when unmapping entries.
+ *
+ * The PCOM register supports purging of multiple pages, with a minium
+ * of 1 page and a maximum of 2GB. Hardware requires the address be
+ * aligned to the size of the range being purged. The size of the range
+ * must be a power of 2. The "Cool perf optimization" in the
+ * allocation routine helps keep that true.
+ */
+static SBA_INLINE void
+sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
+{
+ u32 iovp = (u32) SBA_IOVP(ioc,iova);
+
+ int off = PDIR_INDEX(iovp);
+
+ /* Must be non-zero and rounded up */
+ ASSERT(byte_cnt > 0);
+ ASSERT(0 == (byte_cnt & ~iovp_mask));
+
+#ifdef ASSERT_PDIR_SANITY
+ /* Assert first pdir entry is set */
+ if (!(ioc->pdir_base[off] >> 60)) {
+ sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
+ }
+#endif
+
+ if (byte_cnt <= iovp_size)
+ {
+ ASSERT(off < ioc->pdir_size);
+
+ iovp |= iovp_shift; /* set "size" field for PCOM */
+
+#ifndef FULL_VALID_PDIR
+ /*
+ ** clear I/O PDIR entry "valid" bit
+ ** Do NOT clear the rest - save it for debugging.
+ ** We should only clear bits that have previously
+ ** been enabled.
+ */
+ ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
+#else
+ /*
+ ** If we want to maintain the PDIR as valid, put in
+ ** the spill page so devices prefetching won't
+ ** cause a hard fail.
+ */
+ ioc->pdir_base[off] = (0x80000000000000FFULL | prefetch_spill_page);
+#endif
+ } else {
+ u32 t = get_iovp_order(byte_cnt) + iovp_shift;
+
+ iovp |= t;
+ ASSERT(t <= 31); /* 2GB! Max value of "size" field */
+
+ do {
+ /* verify this pdir entry is enabled */
+ ASSERT(ioc->pdir_base[off] >> 63);
+#ifndef FULL_VALID_PDIR
+ /* clear I/O Pdir entry "valid" bit first */
+ ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
+#else
+ ioc->pdir_base[off] = (0x80000000000000FFULL | prefetch_spill_page);
+#endif
+ off++;
+ byte_cnt -= iovp_size;
+ } while (byte_cnt > 0);
+ }
+
+ WRITE_REG(iovp | ioc->ibase, ioc->ioc_hpa+IOC_PCOM);
+}
+
+/**
+ * sba_map_single - map one buffer and return IOVA for DMA
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @addr: driver buffer to map.
+ * @size: number of bytes to map in driver buffer.
+ * @dir: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+dma_addr_t
+sba_map_single(struct device *dev, void *addr, size_t size, int dir)
+{
+ struct ioc *ioc;
+ dma_addr_t iovp;
+ dma_addr_t offset;
+ u64 *pdir_start;
+ int pide;
+#ifdef ASSERT_PDIR_SANITY
+ unsigned long flags;
+#endif
+#ifdef ALLOW_IOV_BYPASS
+ unsigned long pci_addr = virt_to_phys(addr);
+#endif
+
+#ifdef ALLOW_IOV_BYPASS
+ ASSERT(to_pci_dev(dev)->dma_mask);
+ /*
+ ** Check if the PCI device can DMA to ptr... if so, just return ptr
+ */
+ if (likely((pci_addr & ~to_pci_dev(dev)->dma_mask) == 0)) {
+ /*
+ ** Device is bit capable of DMA'ing to the buffer...
+ ** just return the PCI address of ptr
+ */
+ DBG_BYPASS("sba_map_single() bypass mask/addr: 0x%lx/0x%lx\n",
+ to_pci_dev(dev)->dma_mask, pci_addr);
+ return pci_addr;
+ }
+#endif
+ ioc = GET_IOC(dev);
+ ASSERT(ioc);
+
+ prefetch(ioc->res_hint);
+
+ ASSERT(size > 0);
+ ASSERT(size <= DMA_CHUNK_SIZE);
+
+ /* save offset bits */
+ offset = ((dma_addr_t) (long) addr) & ~iovp_mask;
+
+ /* round up to nearest iovp_size */
+ size = (size + offset + ~iovp_mask) & iovp_mask;
+
+#ifdef ASSERT_PDIR_SANITY
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ if (sba_check_pdir(ioc,"Check before sba_map_single()"))
+ panic("Sanity check failed");
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+
+ pide = sba_alloc_range(ioc, size);
+
+ iovp = (dma_addr_t) pide << iovp_shift;
+
+ DBG_RUN("%s() 0x%p -> 0x%lx\n",
+ __FUNCTION__, addr, (long) iovp | offset);
+
+ pdir_start = &(ioc->pdir_base[pide]);
+
+ while (size > 0) {
+ ASSERT(((u8 *)pdir_start)[7] == 0); /* verify availability */
+ sba_io_pdir_entry(pdir_start, (unsigned long) addr);
+
+ DBG_RUN(" pdir 0x%p %lx\n", pdir_start, *pdir_start);
+
+ addr += iovp_size;
+ size -= iovp_size;
+ pdir_start++;
+ }
+ /* force pdir update */
+ wmb();
+
+ /* form complete address */
+#ifdef ASSERT_PDIR_SANITY
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ sba_check_pdir(ioc,"Check after sba_map_single()");
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+ return SBA_IOVA(ioc, iovp, offset);
+}
+
+/**
+ * sba_unmap_single - unmap one IOVA and free resources
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @iova: IOVA of driver buffer previously mapped.
+ * @size: number of bytes mapped in driver buffer.
+ * @dir: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir)
+{
+ struct ioc *ioc;
+#if DELAYED_RESOURCE_CNT > 0
+ struct sba_dma_pair *d;
+#endif
+ unsigned long flags;
+ dma_addr_t offset;
+
+ ioc = GET_IOC(dev);
+ ASSERT(ioc);
+
+#ifdef ALLOW_IOV_BYPASS
+ if (likely((iova & ioc->imask) != ioc->ibase)) {
+ /*
+ ** Address does not fall w/in IOVA, must be bypassing
+ */
+ DBG_BYPASS("sba_unmap_single() bypass addr: 0x%lx\n", iova);
+
+#ifdef ENABLE_MARK_CLEAN
+ if (dir == DMA_FROM_DEVICE) {
+ mark_clean(phys_to_virt(iova), size);
+ }
+#endif
+ return;
+ }
+#endif
+ offset = iova & ~iovp_mask;
+
+ DBG_RUN("%s() iovp 0x%lx/%x\n",
+ __FUNCTION__, (long) iova, size);
+
+ iova ^= offset; /* clear offset bits */
+ size += offset;
+ size = ROUNDUP(size, iovp_size);
+
+
+#if DELAYED_RESOURCE_CNT > 0
+ spin_lock_irqsave(&ioc->saved_lock, flags);
+ d = &(ioc->saved[ioc->saved_cnt]);
+ d->iova = iova;
+ d->size = size;
+ if (unlikely(++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT)) {
+ int cnt = ioc->saved_cnt;
+ spin_lock(&ioc->res_lock);
+ while (cnt--) {
+ sba_mark_invalid(ioc, d->iova, d->size);
+ sba_free_range(ioc, d->iova, d->size);
+ d--;
+ }
+ ioc->saved_cnt = 0;
+ READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
+ spin_unlock(&ioc->res_lock);
+ }
+ spin_unlock_irqrestore(&ioc->saved_lock, flags);
+#else /* DELAYED_RESOURCE_CNT == 0 */
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ sba_mark_invalid(ioc, iova, size);
+ sba_free_range(ioc, iova, size);
+ READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif /* DELAYED_RESOURCE_CNT == 0 */
+#ifdef ENABLE_MARK_CLEAN
+ if (dir == DMA_FROM_DEVICE) {
+ u32 iovp = (u32) SBA_IOVP(ioc,iova);
+ int off = PDIR_INDEX(iovp);
+ void *addr;
+
+ if (size <= iovp_size) {
+ addr = phys_to_virt(ioc->pdir_base[off] &
+ ~0xE000000000000FFFULL);
+ mark_clean(addr, size);
+ } else {
+ size_t byte_cnt = size;
+
+ do {
+ addr = phys_to_virt(ioc->pdir_base[off] &
+ ~0xE000000000000FFFULL);
+ mark_clean(addr, min(byte_cnt, iovp_size));
+ off++;
+ byte_cnt -= iovp_size;
+
+ } while (byte_cnt > 0);
+ }
+ }
+#endif
+}
+
+
+/**
+ * sba_alloc_coherent - allocate/map shared mem for DMA
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @size: number of bytes mapped in driver buffer.
+ * @dma_handle: IOVA of new buffer.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+void *
+sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+{
+ struct ioc *ioc;
+ void *addr;
+
+ ioc = GET_IOC(dev);
+ ASSERT(ioc);
+
+#ifdef CONFIG_NUMA
+ {
+ struct page *page;
+ page = alloc_pages_node(ioc->node == MAX_NUMNODES ?
+ numa_node_id() : ioc->node, flags,
+ get_order(size));
+
+ if (unlikely(!page))
+ return NULL;
+
+ addr = page_address(page);
+ }
+#else
+ addr = (void *) __get_free_pages(flags, get_order(size));
+#endif
+ if (unlikely(!addr))
+ return NULL;
+
+ memset(addr, 0, size);
+ *dma_handle = virt_to_phys(addr);
+
+#ifdef ALLOW_IOV_BYPASS
+ ASSERT(dev->coherent_dma_mask);
+ /*
+ ** Check if the PCI device can DMA to ptr... if so, just return ptr
+ */
+ if (likely((*dma_handle & ~dev->coherent_dma_mask) == 0)) {
+ DBG_BYPASS("sba_alloc_coherent() bypass mask/addr: 0x%lx/0x%lx\n",
+ dev->coherent_dma_mask, *dma_handle);
+
+ return addr;
+ }
+#endif
+
+ /*
+ * If device can't bypass or bypass is disabled, pass the 32bit fake
+ * device to map single to get an iova mapping.
+ */
+ *dma_handle = sba_map_single(&ioc->sac_only_dev->dev, addr, size, 0);
+
+ return addr;
+}
+
+
+/**
+ * sba_free_coherent - free/unmap shared mem for DMA
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @size: number of bytes mapped in driver buffer.
+ * @vaddr: virtual address IOVA of "consistent" buffer.
+ * @dma_handler: IO virtual address of "consistent" buffer.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle)
+{
+ sba_unmap_single(dev, dma_handle, size, 0);
+ free_pages((unsigned long) vaddr, get_order(size));
+}
+
+
+/*
+** Since 0 is a valid pdir_base index value, can't use that
+** to determine if a value is valid or not. Use a flag to indicate
+** the SG list entry contains a valid pdir index.
+*/
+#define PIDE_FLAG 0x1UL
+
+#ifdef DEBUG_LARGE_SG_ENTRIES
+int dump_run_sg = 0;
+#endif
+
+
+/**
+ * sba_fill_pdir - write allocated SG entries into IO PDIR
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @startsg: list of IOVA/size pairs
+ * @nents: number of entries in startsg list
+ *
+ * Take preprocessed SG list and write corresponding entries
+ * in the IO PDIR.
+ */
+
+static SBA_INLINE int
+sba_fill_pdir(
+ struct ioc *ioc,
+ struct scatterlist *startsg,
+ int nents)
+{
+ struct scatterlist *dma_sg = startsg; /* pointer to current DMA */
+ int n_mappings = 0;
+ u64 *pdirp = NULL;
+ unsigned long dma_offset = 0;
+
+ dma_sg--;
+ while (nents-- > 0) {
+ int cnt = startsg->dma_length;
+ startsg->dma_length = 0;
+
+#ifdef DEBUG_LARGE_SG_ENTRIES
+ if (dump_run_sg)
+ printk(" %2d : %08lx/%05x %p\n",
+ nents, startsg->dma_address, cnt,
+ sba_sg_address(startsg));
+#else
+ DBG_RUN_SG(" %d : %08lx/%05x %p\n",
+ nents, startsg->dma_address, cnt,
+ sba_sg_address(startsg));
+#endif
+ /*
+ ** Look for the start of a new DMA stream
+ */
+ if (startsg->dma_address & PIDE_FLAG) {
+ u32 pide = startsg->dma_address & ~PIDE_FLAG;
+ dma_offset = (unsigned long) pide & ~iovp_mask;
+ startsg->dma_address = 0;
+ dma_sg++;
+ dma_sg->dma_address = pide | ioc->ibase;
+ pdirp = &(ioc->pdir_base[pide >> iovp_shift]);
+ n_mappings++;
+ }
+
+ /*
+ ** Look for a VCONTIG chunk
+ */
+ if (cnt) {
+ unsigned long vaddr = (unsigned long) sba_sg_address(startsg);
+ ASSERT(pdirp);
+
+ /* Since multiple Vcontig blocks could make up
+ ** one DMA stream, *add* cnt to dma_len.
+ */
+ dma_sg->dma_length += cnt;
+ cnt += dma_offset;
+ dma_offset=0; /* only want offset on first chunk */
+ cnt = ROUNDUP(cnt, iovp_size);
+ do {
+ sba_io_pdir_entry(pdirp, vaddr);
+ vaddr += iovp_size;
+ cnt -= iovp_size;
+ pdirp++;
+ } while (cnt > 0);
+ }
+ startsg++;
+ }
+ /* force pdir update */
+ wmb();
+
+#ifdef DEBUG_LARGE_SG_ENTRIES
+ dump_run_sg = 0;
+#endif
+ return(n_mappings);
+}
+
+
+/*
+** Two address ranges are DMA contiguous *iff* "end of prev" and
+** "start of next" are both on an IOV page boundary.
+**
+** (shift left is a quick trick to mask off upper bits)
+*/
+#define DMA_CONTIG(__X, __Y) \
+ (((((unsigned long) __X) | ((unsigned long) __Y)) << (BITS_PER_LONG - iovp_shift)) == 0UL)
+
+
+/**
+ * sba_coalesce_chunks - preprocess the SG list
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @startsg: list of IOVA/size pairs
+ * @nents: number of entries in startsg list
+ *
+ * First pass is to walk the SG list and determine where the breaks are
+ * in the DMA stream. Allocates PDIR entries but does not fill them.
+ * Returns the number of DMA chunks.
+ *
+ * Doing the fill separate from the coalescing/allocation keeps the
+ * code simpler. Future enhancement could make one pass through
+ * the sglist do both.
+ */
+static SBA_INLINE int
+sba_coalesce_chunks( struct ioc *ioc,
+ struct scatterlist *startsg,
+ int nents)
+{
+ struct scatterlist *vcontig_sg; /* VCONTIG chunk head */
+ unsigned long vcontig_len; /* len of VCONTIG chunk */
+ unsigned long vcontig_end;
+ struct scatterlist *dma_sg; /* next DMA stream head */
+ unsigned long dma_offset, dma_len; /* start/len of DMA stream */
+ int n_mappings = 0;
+
+ while (nents > 0) {
+ unsigned long vaddr = (unsigned long) sba_sg_address(startsg);
+
+ /*
+ ** Prepare for first/next DMA stream
+ */
+ dma_sg = vcontig_sg = startsg;
+ dma_len = vcontig_len = vcontig_end = startsg->length;
+ vcontig_end += vaddr;
+ dma_offset = vaddr & ~iovp_mask;
+
+ /* PARANOID: clear entries */
+ startsg->dma_address = startsg->dma_length = 0;
+
+ /*
+ ** This loop terminates one iteration "early" since
+ ** it's always looking one "ahead".
+ */
+ while (--nents > 0) {
+ unsigned long vaddr; /* tmp */
+
+ startsg++;
+
+ /* PARANOID */
+ startsg->dma_address = startsg->dma_length = 0;
+
+ /* catch brokenness in SCSI layer */
+ ASSERT(startsg->length <= DMA_CHUNK_SIZE);
+
+ /*
+ ** First make sure current dma stream won't
+ ** exceed DMA_CHUNK_SIZE if we coalesce the
+ ** next entry.
+ */
+ if (((dma_len + dma_offset + startsg->length + ~iovp_mask) & iovp_mask)
+ > DMA_CHUNK_SIZE)
+ break;
+
+ /*
+ ** Then look for virtually contiguous blocks.
+ **
+ ** append the next transaction?
+ */
+ vaddr = (unsigned long) sba_sg_address(startsg);
+ if (vcontig_end == vaddr)
+ {
+ vcontig_len += startsg->length;
+ vcontig_end += startsg->length;
+ dma_len += startsg->length;
+ continue;
+ }
+
+#ifdef DEBUG_LARGE_SG_ENTRIES
+ dump_run_sg = (vcontig_len > iovp_size);
+#endif
+
+ /*
+ ** Not virtually contigous.
+ ** Terminate prev chunk.
+ ** Start a new chunk.
+ **
+ ** Once we start a new VCONTIG chunk, dma_offset
+ ** can't change. And we need the offset from the first
+ ** chunk - not the last one. Ergo Successive chunks
+ ** must start on page boundaries and dove tail
+ ** with it's predecessor.
+ */
+ vcontig_sg->dma_length = vcontig_len;
+
+ vcontig_sg = startsg;
+ vcontig_len = startsg->length;
+
+ /*
+ ** 3) do the entries end/start on page boundaries?
+ ** Don't update vcontig_end until we've checked.
+ */
+ if (DMA_CONTIG(vcontig_end, vaddr))
+ {
+ vcontig_end = vcontig_len + vaddr;
+ dma_len += vcontig_len;
+ continue;
+ } else {
+ break;
+ }
+ }
+
+ /*
+ ** End of DMA Stream
+ ** Terminate last VCONTIG block.
+ ** Allocate space for DMA stream.
+ */
+ vcontig_sg->dma_length = vcontig_len;
+ dma_len = (dma_len + dma_offset + ~iovp_mask) & iovp_mask;
+ ASSERT(dma_len <= DMA_CHUNK_SIZE);
+ dma_sg->dma_address = (dma_addr_t) (PIDE_FLAG
+ | (sba_alloc_range(ioc, dma_len) << iovp_shift)
+ | dma_offset);
+ n_mappings++;
+ }
+
+ return n_mappings;
+}
+
+
+/**
+ * sba_map_sg - map Scatter/Gather list
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @sglist: array of buffer/length pairs
+ * @nents: number of entries in list
+ * @dir: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, int dir)
+{
+ struct ioc *ioc;
+ int coalesced, filled = 0;
+#ifdef ASSERT_PDIR_SANITY
+ unsigned long flags;
+#endif
+#ifdef ALLOW_IOV_BYPASS_SG
+ struct scatterlist *sg;
+#endif
+
+ DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+ ioc = GET_IOC(dev);
+ ASSERT(ioc);
+
+#ifdef ALLOW_IOV_BYPASS_SG
+ ASSERT(to_pci_dev(dev)->dma_mask);
+ if (likely((ioc->dma_mask & ~to_pci_dev(dev)->dma_mask) == 0)) {
+ for (sg = sglist ; filled < nents ; filled++, sg++){
+ sg->dma_length = sg->length;
+ sg->dma_address = virt_to_phys(sba_sg_address(sg));
+ }
+ return filled;
+ }
+#endif
+ /* Fast path single entry scatterlists. */
+ if (nents == 1) {
+ sglist->dma_length = sglist->length;
+ sglist->dma_address = sba_map_single(dev, sba_sg_address(sglist), sglist->length, dir);
+ return 1;
+ }
+
+#ifdef ASSERT_PDIR_SANITY
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
+ {
+ sba_dump_sg(ioc, sglist, nents);
+ panic("Check before sba_map_sg()");
+ }
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+
+ prefetch(ioc->res_hint);
+
+ /*
+ ** First coalesce the chunks and allocate I/O pdir space
+ **
+ ** If this is one DMA stream, we can properly map using the
+ ** correct virtual address associated with each DMA page.
+ ** w/o this association, we wouldn't have coherent DMA!
+ ** Access to the virtual address is what forces a two pass algorithm.
+ */
+ coalesced = sba_coalesce_chunks(ioc, sglist, nents);
+
+ /*
+ ** Program the I/O Pdir
+ **
+ ** map the virtual addresses to the I/O Pdir
+ ** o dma_address will contain the pdir index
+ ** o dma_len will contain the number of bytes to map
+ ** o address contains the virtual address.
+ */
+ filled = sba_fill_pdir(ioc, sglist, nents);
+
+#ifdef ASSERT_PDIR_SANITY
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
+ {
+ sba_dump_sg(ioc, sglist, nents);
+ panic("Check after sba_map_sg()\n");
+ }
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+
+ ASSERT(coalesced == filled);
+ DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+
+ return filled;
+}
+
+
+/**
+ * sba_unmap_sg - unmap Scatter/Gather list
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @sglist: array of buffer/length pairs
+ * @nents: number of entries in list
+ * @dir: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+void sba_unmap_sg (struct device *dev, struct scatterlist *sglist, int nents, int dir)
+{
+#ifdef ASSERT_PDIR_SANITY
+ struct ioc *ioc;
+ unsigned long flags;
+#endif
+
+ DBG_RUN_SG("%s() START %d entries, %p,%x\n",
+ __FUNCTION__, nents, sba_sg_address(sglist), sglist->length);
+
+#ifdef ASSERT_PDIR_SANITY
+ ioc = GET_IOC(dev);
+ ASSERT(ioc);
+
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ sba_check_pdir(ioc,"Check before sba_unmap_sg()");
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+
+ while (nents && sglist->dma_length) {
+
+ sba_unmap_single(dev, sglist->dma_address, sglist->dma_length, dir);
+ sglist++;
+ nents--;
+ }
+
+ DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
+
+#ifdef ASSERT_PDIR_SANITY
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ sba_check_pdir(ioc,"Check after sba_unmap_sg()");
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+
+}
+
+/**************************************************************
+*
+* Initialization and claim
+*
+***************************************************************/
+
+static void __init
+ioc_iova_init(struct ioc *ioc)
+{
+ int tcnfg;
+ int agp_found = 0;
+ struct pci_dev *device = NULL;
+#ifdef FULL_VALID_PDIR
+ unsigned long index;
+#endif
+
+ /*
+ ** Firmware programs the base and size of a "safe IOVA space"
+ ** (one that doesn't overlap memory or LMMIO space) in the
+ ** IBASE and IMASK registers.
+ */
+ ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & ~0x1UL;
+ ioc->imask = READ_REG(ioc->ioc_hpa + IOC_IMASK) | 0xFFFFFFFF00000000UL;
+
+ ioc->iov_size = ~ioc->imask + 1;
+
+ DBG_INIT("%s() hpa %p IOV base 0x%lx mask 0x%lx (%dMB)\n",
+ __FUNCTION__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
+ ioc->iov_size >> 20);
+
+ switch (iovp_size) {
+ case 4*1024: tcnfg = 0; break;
+ case 8*1024: tcnfg = 1; break;
+ case 16*1024: tcnfg = 2; break;
+ case 64*1024: tcnfg = 3; break;
+ default:
+ panic(PFX "Unsupported IOTLB page size %ldK",
+ iovp_size >> 10);
+ break;
+ }
+ WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG);
+
+ ioc->pdir_size = (ioc->iov_size / iovp_size) * PDIR_ENTRY_SIZE;
+ ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
+ get_order(ioc->pdir_size));
+ if (!ioc->pdir_base)
+ panic(PFX "Couldn't allocate I/O Page Table\n");
+
+ memset(ioc->pdir_base, 0, ioc->pdir_size);
+
+ DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __FUNCTION__,
+ iovp_size >> 10, ioc->pdir_base, ioc->pdir_size);
+
+ ASSERT(ALIGN((unsigned long) ioc->pdir_base, 4*1024) == (unsigned long) ioc->pdir_base);
+ WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
+
+ /*
+ ** If an AGP device is present, only use half of the IOV space
+ ** for PCI DMA. Unfortunately we can't know ahead of time
+ ** whether GART support will actually be used, for now we
+ ** can just key on an AGP device found in the system.
+ ** We program the next pdir index after we stop w/ a key for
+ ** the GART code to handshake on.
+ */
+ for_each_pci_dev(device)
+ agp_found |= pci_find_capability(device, PCI_CAP_ID_AGP);
+
+ if (agp_found && reserve_sba_gart) {
+ printk(KERN_INFO PFX "reserving %dMb of IOVA space at 0x%lx for agpgart\n",
+ ioc->iov_size/2 >> 20, ioc->ibase + ioc->iov_size/2);
+ ioc->pdir_size /= 2;
+ ((u64 *)ioc->pdir_base)[PDIR_INDEX(ioc->iov_size/2)] = ZX1_SBA_IOMMU_COOKIE;
+ }
+#ifdef FULL_VALID_PDIR
+ /*
+ ** Check to see if the spill page has been allocated, we don't need more than
+ ** one across multiple SBAs.
+ */
+ if (!prefetch_spill_page) {
+ char *spill_poison = "SBAIOMMU POISON";
+ int poison_size = 16;
+ void *poison_addr, *addr;
+
+ addr = (void *)__get_free_pages(GFP_KERNEL, get_order(iovp_size));
+ if (!addr)
+ panic(PFX "Couldn't allocate PDIR spill page\n");
+
+ poison_addr = addr;
+ for ( ; (u64) poison_addr < addr + iovp_size; poison_addr += poison_size)
+ memcpy(poison_addr, spill_poison, poison_size);
+
+ prefetch_spill_page = virt_to_phys(addr);
+
+ DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __FUNCTION__, prefetch_spill_page);
+ }
+ /*
+ ** Set all the PDIR entries valid w/ the spill page as the target
+ */
+ for (index = 0 ; index < (ioc->pdir_size / PDIR_ENTRY_SIZE) ; index++)
+ ((u64 *)ioc->pdir_base)[index] = (0x80000000000000FF | prefetch_spill_page);
+#endif
+
+ /* Clear I/O TLB of any possible entries */
+ WRITE_REG(ioc->ibase | (get_iovp_order(ioc->iov_size) + iovp_shift), ioc->ioc_hpa + IOC_PCOM);
+ READ_REG(ioc->ioc_hpa + IOC_PCOM);
+
+ /* Enable IOVA translation */
+ WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);
+ READ_REG(ioc->ioc_hpa + IOC_IBASE);
+}
+
+static void __init
+ioc_resource_init(struct ioc *ioc)
+{
+ spin_lock_init(&ioc->res_lock);
+#if DELAYED_RESOURCE_CNT > 0
+ spin_lock_init(&ioc->saved_lock);
+#endif
+
+ /* resource map size dictated by pdir_size */
+ ioc->res_size = ioc->pdir_size / PDIR_ENTRY_SIZE; /* entries */
+ ioc->res_size >>= 3; /* convert bit count to byte count */
+ DBG_INIT("%s() res_size 0x%x\n", __FUNCTION__, ioc->res_size);
+
+ ioc->res_map = (char *) __get_free_pages(GFP_KERNEL,
+ get_order(ioc->res_size));
+ if (!ioc->res_map)
+ panic(PFX "Couldn't allocate resource map\n");
+
+ memset(ioc->res_map, 0, ioc->res_size);
+ /* next available IOVP - circular search */
+ ioc->res_hint = (unsigned long *) ioc->res_map;
+
+#ifdef ASSERT_PDIR_SANITY
+ /* Mark first bit busy - ie no IOVA 0 */
+ ioc->res_map[0] = 0x1;
+ ioc->pdir_base[0] = 0x8000000000000000ULL | ZX1_SBA_IOMMU_COOKIE;
+#endif
+#ifdef FULL_VALID_PDIR
+ /* Mark the last resource used so we don't prefetch beyond IOVA space */
+ ioc->res_map[ioc->res_size - 1] |= 0x80UL; /* res_map is chars */
+ ioc->pdir_base[(ioc->pdir_size / PDIR_ENTRY_SIZE) - 1] = (0x80000000000000FF
+ | prefetch_spill_page);
+#endif
+
+ DBG_INIT("%s() res_map %x %p\n", __FUNCTION__,
+ ioc->res_size, (void *) ioc->res_map);
+}
+
+static void __init
+ioc_sac_init(struct ioc *ioc)
+{
+ struct pci_dev *sac = NULL;
+ struct pci_controller *controller = NULL;
+
+ /*
+ * pci_alloc_coherent() must return a DMA address which is
+ * SAC (single address cycle) addressable, so allocate a
+ * pseudo-device to enforce that.
+ */
+ sac = kmalloc(sizeof(*sac), GFP_KERNEL);
+ if (!sac)
+ panic(PFX "Couldn't allocate struct pci_dev");
+ memset(sac, 0, sizeof(*sac));
+
+ controller = kmalloc(sizeof(*controller), GFP_KERNEL);
+ if (!controller)
+ panic(PFX "Couldn't allocate struct pci_controller");
+ memset(controller, 0, sizeof(*controller));
+
+ controller->iommu = ioc;
+ sac->sysdata = controller;
+ sac->dma_mask = 0xFFFFFFFFUL;
+#ifdef CONFIG_PCI
+ sac->dev.bus = &pci_bus_type;
+#endif
+ ioc->sac_only_dev = sac;
+}
+
+static void __init
+ioc_zx1_init(struct ioc *ioc)
+{
+ unsigned long rope_config;
+ unsigned int i;
+
+ if (ioc->rev < 0x20)
+ panic(PFX "IOC 2.0 or later required for IOMMU support\n");
+
+ /* 38 bit memory controller + extra bit for range displaced by MMIO */
+ ioc->dma_mask = (0x1UL << 39) - 1;
+
+ /*
+ ** Clear ROPE(N)_CONFIG AO bit.
+ ** Disables "NT Ordering" (~= !"Relaxed Ordering")
+ ** Overrides bit 1 in DMA Hint Sets.
+ ** Improves netperf UDP_STREAM by ~10% for tg3 on bcm5701.
+ */
+ for (i=0; i<(8*8); i+=8) {
+ rope_config = READ_REG(ioc->ioc_hpa + IOC_ROPE0_CFG + i);
+ rope_config &= ~IOC_ROPE_AO;
+ WRITE_REG(rope_config, ioc->ioc_hpa + IOC_ROPE0_CFG + i);
+ }
+}
+
+typedef void (initfunc)(struct ioc *);
+
+struct ioc_iommu {
+ u32 func_id;
+ char *name;
+ initfunc *init;
+};
+
+static struct ioc_iommu ioc_iommu_info[] __initdata = {
+ { ZX1_IOC_ID, "zx1", ioc_zx1_init },
+ { ZX2_IOC_ID, "zx2", NULL },
+ { SX1000_IOC_ID, "sx1000", NULL },
+};
+
+static struct ioc * __init
+ioc_init(u64 hpa, void *handle)
+{
+ struct ioc *ioc;
+ struct ioc_iommu *info;
+
+ ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
+ if (!ioc)
+ return NULL;
+
+ memset(ioc, 0, sizeof(*ioc));
+
+ ioc->next = ioc_list;
+ ioc_list = ioc;
+
+ ioc->handle = handle;
+ ioc->ioc_hpa = ioremap(hpa, 0x1000);
+
+ ioc->func_id = READ_REG(ioc->ioc_hpa + IOC_FUNC_ID);
+ ioc->rev = READ_REG(ioc->ioc_hpa + IOC_FCLASS) & 0xFFUL;
+ ioc->dma_mask = 0xFFFFFFFFFFFFFFFFUL; /* conservative */
+
+ for (info = ioc_iommu_info; info < ioc_iommu_info + ARRAY_SIZE(ioc_iommu_info); info++) {
+ if (ioc->func_id == info->func_id) {
+ ioc->name = info->name;
+ if (info->init)
+ (info->init)(ioc);
+ }
+ }
+
+ iovp_size = (1 << iovp_shift);
+ iovp_mask = ~(iovp_size - 1);
+
+ DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __FUNCTION__,
+ PAGE_SIZE >> 10, iovp_size >> 10);
+
+ if (!ioc->name) {
+ ioc->name = kmalloc(24, GFP_KERNEL);
+ if (ioc->name)
+ sprintf((char *) ioc->name, "Unknown (%04x:%04x)",
+ ioc->func_id & 0xFFFF, (ioc->func_id >> 16) & 0xFFFF);
+ else
+ ioc->name = "Unknown";
+ }
+
+ ioc_iova_init(ioc);
+ ioc_resource_init(ioc);
+ ioc_sac_init(ioc);
+
+ if ((long) ~iovp_mask > (long) ia64_max_iommu_merge_mask)
+ ia64_max_iommu_merge_mask = ~iovp_mask;
+
+ printk(KERN_INFO PFX
+ "%s %d.%d HPA 0x%lx IOVA space %dMb at 0x%lx\n",
+ ioc->name, (ioc->rev >> 4) & 0xF, ioc->rev & 0xF,
+ hpa, ioc->iov_size >> 20, ioc->ibase);
+
+ return ioc;
+}
+
+
+
+/**************************************************************************
+**
+** SBA initialization code (HW and SW)
+**
+** o identify SBA chip itself
+** o FIXME: initialize DMA hints for reasonable defaults
+**
+**************************************************************************/
+
+#ifdef CONFIG_PROC_FS
+static void *
+ioc_start(struct seq_file *s, loff_t *pos)
+{
+ struct ioc *ioc;
+ loff_t n = *pos;
+
+ for (ioc = ioc_list; ioc; ioc = ioc->next)
+ if (!n--)
+ return ioc;
+
+ return NULL;
+}
+
+static void *
+ioc_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ struct ioc *ioc = v;
+
+ ++*pos;
+ return ioc->next;
+}
+
+static void
+ioc_stop(struct seq_file *s, void *v)
+{
+}
+
+static int
+ioc_show(struct seq_file *s, void *v)
+{
+ struct ioc *ioc = v;
+ unsigned long *res_ptr = (unsigned long *)ioc->res_map;
+ int i, used = 0;
+
+ seq_printf(s, "Hewlett Packard %s IOC rev %d.%d\n",
+ ioc->name, ((ioc->rev >> 4) & 0xF), (ioc->rev & 0xF));
+#ifdef CONFIG_NUMA
+ if (ioc->node != MAX_NUMNODES)
+ seq_printf(s, "NUMA node : %d\n", ioc->node);
+#endif
+ seq_printf(s, "IOVA size : %ld MB\n", ((ioc->pdir_size >> 3) * iovp_size)/(1024*1024));
+ seq_printf(s, "IOVA page size : %ld kb\n", iovp_size/1024);
+
+ for (i = 0; i < (ioc->res_size / sizeof(unsigned long)); ++i, ++res_ptr)
+ used += hweight64(*res_ptr);
+
+ seq_printf(s, "PDIR size : %d entries\n", ioc->pdir_size >> 3);
+ seq_printf(s, "PDIR used : %d entries\n", used);
+
+#ifdef PDIR_SEARCH_TIMING
+ {
+ unsigned long i = 0, avg = 0, min, max;
+ min = max = ioc->avg_search[0];
+ for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
+ avg += ioc->avg_search[i];
+ if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
+ if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
+ }
+ avg /= SBA_SEARCH_SAMPLE;
+ seq_printf(s, "Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles/IOVA page)\n",
+ min, avg, max);
+ }
+#endif
+#ifndef ALLOW_IOV_BYPASS
+ seq_printf(s, "IOVA bypass disabled\n");
+#endif
+ return 0;
+}
+
+static struct seq_operations ioc_seq_ops = {
+ .start = ioc_start,
+ .next = ioc_next,
+ .stop = ioc_stop,
+ .show = ioc_show
+};
+
+static int
+ioc_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &ioc_seq_ops);
+}
+
+static struct file_operations ioc_fops = {
+ .open = ioc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release
+};
+
+static void __init
+ioc_proc_init(void)
+{
+ struct proc_dir_entry *dir, *entry;
+
+ dir = proc_mkdir("bus/mckinley", NULL);
+ if (!dir)
+ return;
+
+ entry = create_proc_entry(ioc_list->name, 0, dir);
+ if (entry)
+ entry->proc_fops = &ioc_fops;
+}
+#endif
+
+static void
+sba_connect_bus(struct pci_bus *bus)
+{
+ acpi_handle handle, parent;
+ acpi_status status;
+ struct ioc *ioc;
+
+ if (!PCI_CONTROLLER(bus))
+ panic(PFX "no sysdata on bus %d!\n", bus->number);
+
+ if (PCI_CONTROLLER(bus)->iommu)
+ return;
+
+ handle = PCI_CONTROLLER(bus)->acpi_handle;
+ if (!handle)
+ return;
+
+ /*
+ * The IOC scope encloses PCI root bridges in the ACPI
+ * namespace, so work our way out until we find an IOC we
+ * claimed previously.
+ */
+ do {
+ for (ioc = ioc_list; ioc; ioc = ioc->next)
+ if (ioc->handle == handle) {
+ PCI_CONTROLLER(bus)->iommu = ioc;
+ return;
+ }
+
+ status = acpi_get_parent(handle, &parent);
+ handle = parent;
+ } while (ACPI_SUCCESS(status));
+
+ printk(KERN_WARNING "No IOC for PCI Bus %04x:%02x in ACPI\n", pci_domain_nr(bus), bus->number);
+}
+
+#ifdef CONFIG_NUMA
+static void __init
+sba_map_ioc_to_node(struct ioc *ioc, acpi_handle handle)
+{
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *obj;
+ acpi_handle phandle;
+ unsigned int node;
+
+ ioc->node = MAX_NUMNODES;
+
+ /*
+ * Check for a _PXM on this node first. We don't typically see
+ * one here, so we'll end up getting it from the parent.
+ */
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PXM", NULL, &buffer))) {
+ if (ACPI_FAILURE(acpi_get_parent(handle, &phandle)))
+ return;
+
+ /* Reset the acpi buffer */
+ buffer.length = ACPI_ALLOCATE_BUFFER;
+ buffer.pointer = NULL;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(phandle, "_PXM", NULL,
+ &buffer)))
+ return;
+ }
+
+ if (!buffer.length || !buffer.pointer)
+ return;
+
+ obj = buffer.pointer;
+
+ if (obj->type != ACPI_TYPE_INTEGER ||
+ obj->integer.value >= MAX_PXM_DOMAINS) {
+ acpi_os_free(buffer.pointer);
+ return;
+ }
+
+ node = pxm_to_nid_map[obj->integer.value];
+ acpi_os_free(buffer.pointer);
+
+ if (node >= MAX_NUMNODES || !node_online(node))
+ return;
+
+ ioc->node = node;
+ return;
+}
+#else
+#define sba_map_ioc_to_node(ioc, handle)
+#endif
+
+static int __init
+acpi_sba_ioc_add(struct acpi_device *device)
+{
+ struct ioc *ioc;
+ acpi_status status;
+ u64 hpa, length;
+ struct acpi_buffer buffer;
+ struct acpi_device_info *dev_info;
+
+ status = hp_acpi_csr_space(device->handle, &hpa, &length);
+ if (ACPI_FAILURE(status))
+ return 1;
+
+ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+ status = acpi_get_object_info(device->handle, &buffer);
+ if (ACPI_FAILURE(status))
+ return 1;
+ dev_info = buffer.pointer;
+
+ /*
+ * For HWP0001, only SBA appears in ACPI namespace. It encloses the PCI
+ * root bridges, and its CSR space includes the IOC function.
+ */
+ if (strncmp("HWP0001", dev_info->hardware_id.value, 7) == 0) {
+ hpa += ZX1_IOC_OFFSET;
+ /* zx1 based systems default to kernel page size iommu pages */
+ if (!iovp_shift)
+ iovp_shift = min(PAGE_SHIFT, 16);
+ }
+ ACPI_MEM_FREE(dev_info);
+
+ /*
+ * default anything not caught above or specified on cmdline to 4k
+ * iommu page size
+ */
+ if (!iovp_shift)
+ iovp_shift = 12;
+
+ ioc = ioc_init(hpa, device->handle);
+ if (!ioc)
+ return 1;
+
+ /* setup NUMA node association */
+ sba_map_ioc_to_node(ioc, device->handle);
+ return 0;
+}
+
+static struct acpi_driver acpi_sba_ioc_driver = {
+ .name = "IOC IOMMU Driver",
+ .ids = "HWP0001,HWP0004",
+ .ops = {
+ .add = acpi_sba_ioc_add,
+ },
+};
+
+static int __init
+sba_init(void)
+{
+ acpi_bus_register_driver(&acpi_sba_ioc_driver);
+ if (!ioc_list)
+ return 0;
+
+#ifdef CONFIG_PCI
+ {
+ struct pci_bus *b = NULL;
+ while ((b = pci_find_next_bus(b)) != NULL)
+ sba_connect_bus(b);
+ }
+#endif
+
+#ifdef CONFIG_PROC_FS
+ ioc_proc_init();
+#endif
+ return 0;
+}
+
+subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
+
+extern void dig_setup(char**);
+/*
+ * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
+ * so we use the platform_setup hook to fix it up.
+ */
+void __init
+sba_setup(char **cmdline_p)
+{
+ MAX_DMA_ADDRESS = ~0UL;
+ dig_setup(cmdline_p);
+}
+
+static int __init
+nosbagart(char *str)
+{
+ reserve_sba_gart = 0;
+ return 1;
+}
+
+int
+sba_dma_supported (struct device *dev, u64 mask)
+{
+ /* make sure it's at least 32bit capable */
+ return ((mask & 0xFFFFFFFFUL) == 0xFFFFFFFFUL);
+}
+
+int
+sba_dma_mapping_error (dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+__setup("nosbagart", nosbagart);
+
+static int __init
+sba_page_override(char *str)
+{
+ unsigned long page_size;
+
+ page_size = memparse(str, &str);
+ switch (page_size) {
+ case 4096:
+ case 8192:
+ case 16384:
+ case 65536:
+ iovp_shift = ffs(page_size) - 1;
+ break;
+ default:
+ printk("%s: unknown/unsupported iommu page size %ld\n",
+ __FUNCTION__, page_size);
+ }
+
+ return 1;
+}
+
+__setup("sbapagesize=",sba_page_override);
+
+EXPORT_SYMBOL(sba_dma_mapping_error);
+EXPORT_SYMBOL(sba_map_single);
+EXPORT_SYMBOL(sba_unmap_single);
+EXPORT_SYMBOL(sba_map_sg);
+EXPORT_SYMBOL(sba_unmap_sg);
+EXPORT_SYMBOL(sba_dma_supported);
+EXPORT_SYMBOL(sba_alloc_coherent);
+EXPORT_SYMBOL(sba_free_coherent);
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
new file mode 100644
index 000000000000..18ccb1266e18
--- /dev/null
+++ b/arch/ia64/hp/sim/Kconfig
@@ -0,0 +1,20 @@
+
+menu "HP Simulator drivers"
+ depends on IA64_HP_SIM || IA64_GENERIC
+
+config HP_SIMETH
+ bool "Simulated Ethernet "
+
+config HP_SIMSERIAL
+ bool "Simulated serial driver support"
+
+config HP_SIMSERIAL_CONSOLE
+ bool "Console for HP simulator"
+ depends on HP_SIMSERIAL
+
+config HP_SIMSCSI
+ tristate "Simulated SCSI disk"
+ depends on SCSI
+
+endmenu
+
diff --git a/arch/ia64/hp/sim/Makefile b/arch/ia64/hp/sim/Makefile
new file mode 100644
index 000000000000..d10da47931d7
--- /dev/null
+++ b/arch/ia64/hp/sim/Makefile
@@ -0,0 +1,16 @@
+#
+# ia64/platform/hp/sim/Makefile
+#
+# Copyright (C) 2002 Hewlett-Packard Co.
+# David Mosberger-Tang <davidm@hpl.hp.com>
+# Copyright (C) 1999 Silicon Graphics, Inc.
+# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
+#
+
+obj-y := hpsim_irq.o hpsim_setup.o hpsim.o
+obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
+
+obj-$(CONFIG_HP_SIMETH) += simeth.o
+obj-$(CONFIG_HP_SIMSERIAL) += simserial.o
+obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o
+obj-$(CONFIG_HP_SIMSCSI) += simscsi.o
diff --git a/arch/ia64/hp/sim/boot/Makefile b/arch/ia64/hp/sim/boot/Makefile
new file mode 100644
index 000000000000..df6e9968c845
--- /dev/null
+++ b/arch/ia64/hp/sim/boot/Makefile
@@ -0,0 +1,37 @@
+#
+# ia64/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1998, 2003 by David Mosberger-Tang <davidm@hpl.hp.com>
+#
+
+targets-$(CONFIG_IA64_HP_SIM) += bootloader
+targets := vmlinux.bin vmlinux.gz $(targets-y)
+
+quiet_cmd_cptotop = LN $@
+ cmd_cptotop = ln -f $< $@
+
+vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y))
+ $(call cmd,cptotop)
+ @echo ' Kernel: $@ is ready'
+
+boot: bootloader
+
+bootloader: $(obj)/bootloader
+ $(call cmd,cptotop)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+
+LDFLAGS_bootloader = -static -T
+
+$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \
+ lib/lib.a arch/ia64/lib/lib.a FORCE
+ $(call if_changed,ld)
diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S
new file mode 100644
index 000000000000..9364199e5632
--- /dev/null
+++ b/arch/ia64/hp/sim/boot/boot_head.S
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/asmmacro.h>
+
+ .bss
+ .align 16
+stack_mem:
+ .skip 16834
+
+ .text
+
+/* This needs to be defined because lib/string.c:strlcat() calls it in case of error... */
+GLOBAL_ENTRY(printk)
+ break 0
+END(printk)
+
+GLOBAL_ENTRY(_start)
+ .prologue
+ .save rp, r0
+ .body
+ movl gp = __gp
+ movl sp = stack_mem
+ bsw.1
+ br.call.sptk.many rp=start_bootloader
+END(_start)
+
+/*
+ * Set a break point on this function so that symbols are available to set breakpoints in
+ * the kernel being debugged.
+ */
+GLOBAL_ENTRY(debug_break)
+ br.ret.sptk.many b0
+END(debug_break)
+
+GLOBAL_ENTRY(ssc)
+ .regstk 5,0,0,0
+ mov r15=in4
+ break 0x80001
+ br.ret.sptk.many b0
+END(ssc)
+
+GLOBAL_ENTRY(jmp_to_kernel)
+ .regstk 2,0,0,0
+ mov r28=in0
+ mov b7=in1
+ br.sptk.few b7
+END(jmp_to_kernel)
+
+
+GLOBAL_ENTRY(pal_emulator_static)
+ mov r8=-1
+ mov r9=256
+ ;;
+ cmp.gtu p6,p7=r9,r28 /* r28 <= 255? */
+(p6) br.cond.sptk.few static
+ ;;
+ mov r9=512
+ ;;
+ cmp.gtu p6,p7=r9,r28
+(p6) br.cond.sptk.few stacked
+ ;;
+static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */
+(p7) br.cond.sptk.few 1f
+ ;;
+ mov r8=0 /* status = 0 */
+ movl r9=0x100000000 /* tc.base */
+ movl r10=0x0000000200000003 /* count[0], count[1] */
+ movl r11=0x1000000000002000 /* stride[0], stride[1] */
+ br.cond.sptk.few rp
+1: cmp.eq p6,p7=14,r28 /* PAL_FREQ_RATIOS */
+(p7) br.cond.sptk.few 1f
+ mov r8=0 /* status = 0 */
+ movl r9 =0x100000064 /* proc_ratio (1/100) */
+ movl r10=0x100000100 /* bus_ratio<<32 (1/256) */
+ movl r11=0x100000064 /* itc_ratio<<32 (1/100) */
+ ;;
+1: cmp.eq p6,p7=19,r28 /* PAL_RSE_INFO */
+(p7) br.cond.sptk.few 1f
+ mov r8=0 /* status = 0 */
+ mov r9=96 /* num phys stacked */
+ mov r10=0 /* hints */
+ mov r11=0
+ br.cond.sptk.few rp
+1: cmp.eq p6,p7=1,r28 /* PAL_CACHE_FLUSH */
+(p7) br.cond.sptk.few 1f
+ mov r9=ar.lc
+ movl r8=524288 /* flush 512k million cache lines (16MB) */
+ ;;
+ mov ar.lc=r8
+ movl r8=0xe000000000000000
+ ;;
+.loop: fc r8
+ add r8=32,r8
+ br.cloop.sptk.few .loop
+ sync.i
+ ;;
+ srlz.i
+ ;;
+ mov ar.lc=r9
+ mov r8=r0
+ ;;
+1: cmp.eq p6,p7=15,r28 /* PAL_PERF_MON_INFO */
+(p7) br.cond.sptk.few 1f
+ mov r8=0 /* status = 0 */
+ movl r9 =0x08122f04 /* generic=4 width=47 retired=8 cycles=18 */
+ mov r10=0 /* reserved */
+ mov r11=0 /* reserved */
+ mov r16=0xffff /* implemented PMC */
+ mov r17=0x3ffff /* implemented PMD */
+ add r18=8,r29 /* second index */
+ ;;
+ st8 [r29]=r16,16 /* store implemented PMC */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ ;;
+ st8 [r29]=r0,16 /* clear remaining bits */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ ;;
+ st8 [r29]=r17,16 /* store implemented PMD */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ mov r16=0xf0 /* cycles count capable PMC */
+ ;;
+ st8 [r29]=r0,16 /* clear remaining bits */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ mov r17=0xf0 /* retired bundles capable PMC */
+ ;;
+ st8 [r29]=r16,16 /* store cycles capable */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ ;;
+ st8 [r29]=r0,16 /* clear remaining bits */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ ;;
+ st8 [r29]=r17,16 /* store retired bundle capable */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ ;;
+ st8 [r29]=r0,16 /* clear remaining bits */
+ st8 [r18]=r0,16 /* clear remaining bits */
+ ;;
+1: br.cond.sptk.few rp
+stacked:
+ br.ret.sptk.few rp
+END(pal_emulator_static)
diff --git a/arch/ia64/hp/sim/boot/bootloader.c b/arch/ia64/hp/sim/boot/bootloader.c
new file mode 100644
index 000000000000..51a7b7b4dd0e
--- /dev/null
+++ b/arch/ia64/hp/sim/boot/bootloader.c
@@ -0,0 +1,176 @@
+/*
+ * arch/ia64/hp/sim/boot/bootloader.c
+ *
+ * Loads an ELF kernel.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 01/07/99 S.Eranian modified to pass command line arguments to kernel
+ */
+struct task_struct; /* forward declaration for elf.h */
+
+#include <linux/config.h>
+#include <linux/elf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/elf.h>
+#include <asm/intrinsics.h>
+#include <asm/pal.h>
+#include <asm/pgtable.h>
+#include <asm/sal.h>
+#include <asm/system.h>
+
+#include "ssc.h"
+
+struct disk_req {
+ unsigned long addr;
+ unsigned len;
+};
+
+struct disk_stat {
+ int fd;
+ unsigned count;
+};
+
+extern void jmp_to_kernel (unsigned long bp, unsigned long e_entry);
+extern struct ia64_boot_param *sys_fw_init (const char *args, int arglen);
+extern void debug_break (void);
+
+static void
+cons_write (const char *buf)
+{
+ unsigned long ch;
+
+ while ((ch = *buf++) != '\0') {
+ ssc(ch, 0, 0, 0, SSC_PUTCHAR);
+ if (ch == '\n')
+ ssc('\r', 0, 0, 0, SSC_PUTCHAR);
+ }
+}
+
+#define MAX_ARGS 32
+
+void
+start_bootloader (void)
+{
+ static char mem[4096];
+ static char buffer[1024];
+ unsigned long off;
+ int fd, i;
+ struct disk_req req;
+ struct disk_stat stat;
+ struct elfhdr *elf;
+ struct elf_phdr *elf_phdr; /* program header */
+ unsigned long e_entry, e_phoff, e_phnum;
+ register struct ia64_boot_param *bp;
+ char *kpath, *args;
+ long arglen = 0;
+
+ ssc(0, 0, 0, 0, SSC_CONSOLE_INIT);
+
+ /*
+ * S.Eranian: extract the commandline argument from the simulator
+ *
+ * The expected format is as follows:
+ *
+ * kernelname args...
+ *
+ * Both are optional but you can't have the second one without the first.
+ */
+ arglen = ssc((long) buffer, 0, 0, 0, SSC_GET_ARGS);
+
+ kpath = "vmlinux";
+ args = buffer;
+ if (arglen > 0) {
+ kpath = buffer;
+ while (*args != ' ' && *args != '\0')
+ ++args, --arglen;
+ if (*args == ' ')
+ *args++ = '\0', --arglen;
+ }
+
+ if (arglen <= 0) {
+ args = "";
+ arglen = 1;
+ }
+
+ fd = ssc((long) kpath, 1, 0, 0, SSC_OPEN);
+
+ if (fd < 0) {
+ cons_write(kpath);
+ cons_write(": file not found, reboot now\n");
+ for(;;);
+ }
+ stat.fd = fd;
+ off = 0;
+
+ req.len = sizeof(mem);
+ req.addr = (long) mem;
+ ssc(fd, 1, (long) &req, off, SSC_READ);
+ ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
+
+ elf = (struct elfhdr *) mem;
+ if (elf->e_ident[0] == 0x7f && strncmp(elf->e_ident + 1, "ELF", 3) != 0) {
+ cons_write("not an ELF file\n");
+ return;
+ }
+ if (elf->e_type != ET_EXEC) {
+ cons_write("not an ELF executable\n");
+ return;
+ }
+ if (!elf_check_arch(elf)) {
+ cons_write("kernel not for this processor\n");
+ return;
+ }
+
+ e_entry = elf->e_entry;
+ e_phnum = elf->e_phnum;
+ e_phoff = elf->e_phoff;
+
+ cons_write("loading ");
+ cons_write(kpath);
+ cons_write("...\n");
+
+ for (i = 0; i < e_phnum; ++i) {
+ req.len = sizeof(*elf_phdr);
+ req.addr = (long) mem;
+ ssc(fd, 1, (long) &req, e_phoff, SSC_READ);
+ ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
+ if (stat.count != sizeof(*elf_phdr)) {
+ cons_write("failed to read phdr\n");
+ return;
+ }
+ e_phoff += sizeof(*elf_phdr);
+
+ elf_phdr = (struct elf_phdr *) mem;
+
+ if (elf_phdr->p_type != PT_LOAD)
+ continue;
+
+ req.len = elf_phdr->p_filesz;
+ req.addr = __pa(elf_phdr->p_paddr);
+ ssc(fd, 1, (long) &req, elf_phdr->p_offset, SSC_READ);
+ ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
+ memset((char *)__pa(elf_phdr->p_paddr) + elf_phdr->p_filesz, 0,
+ elf_phdr->p_memsz - elf_phdr->p_filesz);
+ }
+ ssc(fd, 0, 0, 0, SSC_CLOSE);
+
+ cons_write("starting kernel...\n");
+
+ /* fake an I/O base address: */
+ ia64_setreg(_IA64_REG_AR_KR0, 0xffffc000000UL);
+
+ bp = sys_fw_init(args, arglen);
+
+ ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS);
+
+ debug_break();
+ jmp_to_kernel((unsigned long) bp, e_entry);
+
+ cons_write("kernel returned!\n");
+ ssc(-1, 0, 0, 0, SSC_EXIT);
+}
diff --git a/arch/ia64/hp/sim/boot/bootloader.lds b/arch/ia64/hp/sim/boot/bootloader.lds
new file mode 100644
index 000000000000..69ae58531033
--- /dev/null
+++ b/arch/ia64/hp/sim/boot/bootloader.lds
@@ -0,0 +1,65 @@
+OUTPUT_FORMAT("elf64-ia64-little")
+OUTPUT_ARCH(ia64)
+ENTRY(_start)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = 0x100000;
+
+ _text = .;
+ .text : { *(__ivt_section) *(.text) }
+ _etext = .;
+
+ /* Global data */
+ _data = .;
+ .rodata : { *(.rodata) *(.rodata.*) }
+ .data : { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS }
+ __gp = ALIGN (8) + 0x200000;
+ .got : { *(.got.plt) *(.got) }
+ /* We want the small data sections together, so single-instruction offsets
+ can access them all, and initialized data all before uninitialized, so
+ we can shorten the on-disk segment size. */
+ .sdata : { *(.sdata) }
+ _edata = .;
+
+ _bss = .;
+ .sbss : { *(.sbss) *(.scommon) }
+ .bss : { *(.bss) *(COMMON) }
+ . = ALIGN(64 / 8);
+ _end = . ;
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+ /* These must appear regardless of . */
+}
diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c
new file mode 100644
index 000000000000..5c46928e3dc6
--- /dev/null
+++ b/arch/ia64/hp/sim/boot/fw-emu.c
@@ -0,0 +1,398 @@
+/*
+ * PAL & SAL emulation.
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+# include <linux/pci.h>
+#endif
+
+#include <linux/efi.h>
+#include <asm/io.h>
+#include <asm/pal.h>
+#include <asm/sal.h>
+
+#include "ssc.h"
+
+#define MB (1024*1024UL)
+
+#define SIMPLE_MEMMAP 1
+
+#if SIMPLE_MEMMAP
+# define NUM_MEM_DESCS 4
+#else
+# define NUM_MEM_DESCS 16
+#endif
+
+static char fw_mem[( sizeof(struct ia64_boot_param)
+ + sizeof(efi_system_table_t)
+ + sizeof(efi_runtime_services_t)
+ + 1*sizeof(efi_config_table_t)
+ + sizeof(struct ia64_sal_systab)
+ + sizeof(struct ia64_sal_desc_entry_point)
+ + NUM_MEM_DESCS*(sizeof(efi_memory_desc_t))
+ + 1024)] __attribute__ ((aligned (8)));
+
+#define SECS_PER_HOUR (60 * 60)
+#define SECS_PER_DAY (SECS_PER_HOUR * 24)
+
+/* Compute the `struct tm' representation of *T,
+ offset OFFSET seconds east of UTC,
+ and store year, yday, mon, mday, wday, hour, min, sec into *TP.
+ Return nonzero if successful. */
+int
+offtime (unsigned long t, efi_time_t *tp)
+{
+ const unsigned short int __mon_yday[2][13] =
+ {
+ /* Normal years. */
+ { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+ /* Leap years. */
+ { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+ };
+ long int days, rem, y;
+ const unsigned short int *ip;
+
+ days = t / SECS_PER_DAY;
+ rem = t % SECS_PER_DAY;
+ while (rem < 0) {
+ rem += SECS_PER_DAY;
+ --days;
+ }
+ while (rem >= SECS_PER_DAY) {
+ rem -= SECS_PER_DAY;
+ ++days;
+ }
+ tp->hour = rem / SECS_PER_HOUR;
+ rem %= SECS_PER_HOUR;
+ tp->minute = rem / 60;
+ tp->second = rem % 60;
+ /* January 1, 1970 was a Thursday. */
+ y = 1970;
+
+# define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
+# define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
+# define __isleap(year) \
+ ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+ while (days < 0 || days >= (__isleap (y) ? 366 : 365)) {
+ /* Guess a corrected year, assuming 365 days per year. */
+ long int yg = y + days / 365 - (days % 365 < 0);
+
+ /* Adjust DAYS and Y to match the guessed year. */
+ days -= ((yg - y) * 365 + LEAPS_THRU_END_OF (yg - 1)
+ - LEAPS_THRU_END_OF (y - 1));
+ y = yg;
+ }
+ tp->year = y;
+ ip = __mon_yday[__isleap(y)];
+ for (y = 11; days < (long int) ip[y]; --y)
+ continue;
+ days -= ip[y];
+ tp->month = y + 1;
+ tp->day = days + 1;
+ return 1;
+}
+
+extern void pal_emulator_static (void);
+
+/* Macro to emulate SAL call using legacy IN and OUT calls to CF8, CFC etc.. */
+
+#define BUILD_CMD(addr) ((0x80000000 | (addr)) & ~3)
+
+#define REG_OFFSET(addr) (0x00000000000000FF & (addr))
+#define DEVICE_FUNCTION(addr) (0x000000000000FF00 & (addr))
+#define BUS_NUMBER(addr) (0x0000000000FF0000 & (addr))
+
+static efi_status_t
+fw_efi_get_time (efi_time_t *tm, efi_time_cap_t *tc)
+{
+#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
+ struct {
+ int tv_sec; /* must be 32bits to work */
+ int tv_usec;
+ } tv32bits;
+
+ ssc((unsigned long) &tv32bits, 0, 0, 0, SSC_GET_TOD);
+
+ memset(tm, 0, sizeof(*tm));
+ offtime(tv32bits.tv_sec, tm);
+
+ if (tc)
+ memset(tc, 0, sizeof(*tc));
+#else
+# error Not implemented yet...
+#endif
+ return EFI_SUCCESS;
+}
+
+static void
+efi_reset_system (int reset_type, efi_status_t status, unsigned long data_size, efi_char16_t *data)
+{
+#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
+ ssc(status, 0, 0, 0, SSC_EXIT);
+#else
+# error Not implemented yet...
+#endif
+}
+
+static efi_status_t
+efi_unimplemented (void)
+{
+ return EFI_UNSUPPORTED;
+}
+
+static struct sal_ret_values
+sal_emulator (long index, unsigned long in1, unsigned long in2,
+ unsigned long in3, unsigned long in4, unsigned long in5,
+ unsigned long in6, unsigned long in7)
+{
+ long r9 = 0;
+ long r10 = 0;
+ long r11 = 0;
+ long status;
+
+ /*
+ * Don't do a "switch" here since that gives us code that
+ * isn't self-relocatable.
+ */
+ status = 0;
+ if (index == SAL_FREQ_BASE) {
+ switch (in1) {
+ case SAL_FREQ_BASE_PLATFORM:
+ r9 = 200000000;
+ break;
+
+ case SAL_FREQ_BASE_INTERVAL_TIMER:
+ /*
+ * Is this supposed to be the cr.itc frequency
+ * or something platform specific? The SAL
+ * doc ain't exactly clear on this...
+ */
+ r9 = 700000000;
+ break;
+
+ case SAL_FREQ_BASE_REALTIME_CLOCK:
+ r9 = 1;
+ break;
+
+ default:
+ status = -1;
+ break;
+ }
+ } else if (index == SAL_SET_VECTORS) {
+ ;
+ } else if (index == SAL_GET_STATE_INFO) {
+ ;
+ } else if (index == SAL_GET_STATE_INFO_SIZE) {
+ ;
+ } else if (index == SAL_CLEAR_STATE_INFO) {
+ ;
+ } else if (index == SAL_MC_RENDEZ) {
+ ;
+ } else if (index == SAL_MC_SET_PARAMS) {
+ ;
+ } else if (index == SAL_CACHE_FLUSH) {
+ ;
+ } else if (index == SAL_CACHE_INIT) {
+ ;
+#ifdef CONFIG_PCI
+ } else if (index == SAL_PCI_CONFIG_READ) {
+ /*
+ * in1 contains the PCI configuration address and in2
+ * the size of the read. The value that is read is
+ * returned via the general register r9.
+ */
+ outl(BUILD_CMD(in1), 0xCF8);
+ if (in2 == 1) /* Reading byte */
+ r9 = inb(0xCFC + ((REG_OFFSET(in1) & 3)));
+ else if (in2 == 2) /* Reading word */
+ r9 = inw(0xCFC + ((REG_OFFSET(in1) & 2)));
+ else /* Reading dword */
+ r9 = inl(0xCFC);
+ status = PCIBIOS_SUCCESSFUL;
+ } else if (index == SAL_PCI_CONFIG_WRITE) {
+ /*
+ * in1 contains the PCI configuration address, in2 the
+ * size of the write, and in3 the actual value to be
+ * written out.
+ */
+ outl(BUILD_CMD(in1), 0xCF8);
+ if (in2 == 1) /* Writing byte */
+ outb(in3, 0xCFC + ((REG_OFFSET(in1) & 3)));
+ else if (in2 == 2) /* Writing word */
+ outw(in3, 0xCFC + ((REG_OFFSET(in1) & 2)));
+ else /* Writing dword */
+ outl(in3, 0xCFC);
+ status = PCIBIOS_SUCCESSFUL;
+#endif /* CONFIG_PCI */
+ } else if (index == SAL_UPDATE_PAL) {
+ ;
+ } else {
+ status = -1;
+ }
+ return ((struct sal_ret_values) {status, r9, r10, r11});
+}
+
+
+/*
+ * This is here to work around a bug in egcs-1.1.1b that causes the
+ * compiler to crash (seems like a bug in the new alias analysis code.
+ */
+void *
+id (long addr)
+{
+ return (void *) addr;
+}
+
+struct ia64_boot_param *
+sys_fw_init (const char *args, int arglen)
+{
+ efi_system_table_t *efi_systab;
+ efi_runtime_services_t *efi_runtime;
+ efi_config_table_t *efi_tables;
+ struct ia64_sal_systab *sal_systab;
+ efi_memory_desc_t *efi_memmap, *md;
+ unsigned long *pal_desc, *sal_desc;
+ struct ia64_sal_desc_entry_point *sal_ed;
+ struct ia64_boot_param *bp;
+ unsigned char checksum = 0;
+ char *cp, *cmd_line;
+ int i = 0;
+# define MAKE_MD(typ, attr, start, end) \
+ do { \
+ md = efi_memmap + i++; \
+ md->type = typ; \
+ md->pad = 0; \
+ md->phys_addr = start; \
+ md->virt_addr = 0; \
+ md->num_pages = (end - start) >> 12; \
+ md->attribute = attr; \
+ } while (0)
+
+ memset(fw_mem, 0, sizeof(fw_mem));
+
+ pal_desc = (unsigned long *) &pal_emulator_static;
+ sal_desc = (unsigned long *) &sal_emulator;
+
+ cp = fw_mem;
+ efi_systab = (void *) cp; cp += sizeof(*efi_systab);
+ efi_runtime = (void *) cp; cp += sizeof(*efi_runtime);
+ efi_tables = (void *) cp; cp += sizeof(*efi_tables);
+ sal_systab = (void *) cp; cp += sizeof(*sal_systab);
+ sal_ed = (void *) cp; cp += sizeof(*sal_ed);
+ efi_memmap = (void *) cp; cp += NUM_MEM_DESCS*sizeof(*efi_memmap);
+ bp = (void *) cp; cp += sizeof(*bp);
+ cmd_line = (void *) cp;
+
+ if (args) {
+ if (arglen >= 1024)
+ arglen = 1023;
+ memcpy(cmd_line, args, arglen);
+ } else {
+ arglen = 0;
+ }
+ cmd_line[arglen] = '\0';
+
+ memset(efi_systab, 0, sizeof(efi_systab));
+ efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE;
+ efi_systab->hdr.revision = EFI_SYSTEM_TABLE_REVISION;
+ efi_systab->hdr.headersize = sizeof(efi_systab->hdr);
+ efi_systab->fw_vendor = __pa("H\0e\0w\0l\0e\0t\0t\0-\0P\0a\0c\0k\0a\0r\0d\0\0");
+ efi_systab->fw_revision = 1;
+ efi_systab->runtime = (void *) __pa(efi_runtime);
+ efi_systab->nr_tables = 1;
+ efi_systab->tables = __pa(efi_tables);
+
+ efi_runtime->hdr.signature = EFI_RUNTIME_SERVICES_SIGNATURE;
+ efi_runtime->hdr.revision = EFI_RUNTIME_SERVICES_REVISION;
+ efi_runtime->hdr.headersize = sizeof(efi_runtime->hdr);
+ efi_runtime->get_time = __pa(&fw_efi_get_time);
+ efi_runtime->set_time = __pa(&efi_unimplemented);
+ efi_runtime->get_wakeup_time = __pa(&efi_unimplemented);
+ efi_runtime->set_wakeup_time = __pa(&efi_unimplemented);
+ efi_runtime->set_virtual_address_map = __pa(&efi_unimplemented);
+ efi_runtime->get_variable = __pa(&efi_unimplemented);
+ efi_runtime->get_next_variable = __pa(&efi_unimplemented);
+ efi_runtime->set_variable = __pa(&efi_unimplemented);
+ efi_runtime->get_next_high_mono_count = __pa(&efi_unimplemented);
+ efi_runtime->reset_system = __pa(&efi_reset_system);
+
+ efi_tables->guid = SAL_SYSTEM_TABLE_GUID;
+ efi_tables->table = __pa(sal_systab);
+
+ /* fill in the SAL system table: */
+ memcpy(sal_systab->signature, "SST_", 4);
+ sal_systab->size = sizeof(*sal_systab);
+ sal_systab->sal_rev_minor = 1;
+ sal_systab->sal_rev_major = 0;
+ sal_systab->entry_count = 1;
+
+#ifdef CONFIG_IA64_GENERIC
+ strcpy(sal_systab->oem_id, "Generic");
+ strcpy(sal_systab->product_id, "IA-64 system");
+#endif
+
+#ifdef CONFIG_IA64_HP_SIM
+ strcpy(sal_systab->oem_id, "Hewlett-Packard");
+ strcpy(sal_systab->product_id, "HP-simulator");
+#endif
+
+#ifdef CONFIG_IA64_SDV
+ strcpy(sal_systab->oem_id, "Intel");
+ strcpy(sal_systab->product_id, "SDV");
+#endif
+
+ /* fill in an entry point: */
+ sal_ed->type = SAL_DESC_ENTRY_POINT;
+ sal_ed->pal_proc = __pa(pal_desc[0]);
+ sal_ed->sal_proc = __pa(sal_desc[0]);
+ sal_ed->gp = __pa(sal_desc[1]);
+
+ for (cp = (char *) sal_systab; cp < (char *) efi_memmap; ++cp)
+ checksum += *cp;
+
+ sal_systab->checksum = -checksum;
+
+#if SIMPLE_MEMMAP
+ /* simulate free memory at physical address zero */
+ MAKE_MD(EFI_BOOT_SERVICES_DATA, EFI_MEMORY_WB, 0*MB, 1*MB);
+ MAKE_MD(EFI_PAL_CODE, EFI_MEMORY_WB, 1*MB, 2*MB);
+ MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 2*MB, 130*MB);
+ MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 4096*MB, 4128*MB);
+#else
+ MAKE_MD( 4, 0x9, 0x0000000000000000, 0x0000000000001000);
+ MAKE_MD( 7, 0x9, 0x0000000000001000, 0x000000000008a000);
+ MAKE_MD( 4, 0x9, 0x000000000008a000, 0x00000000000a0000);
+ MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000);
+ MAKE_MD( 7, 0x9, 0x0000000000100000, 0x0000000004400000);
+ MAKE_MD( 2, 0x9, 0x0000000004400000, 0x0000000004be5000);
+ MAKE_MD( 7, 0x9, 0x0000000004be5000, 0x000000007f77e000);
+ MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000);
+ MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000);
+ MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000);
+ MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000);
+ MAKE_MD( 7, 0x9, 0x000000007fc3a000, 0x000000007fea0000);
+ MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000);
+ MAKE_MD( 7, 0x9, 0x000000007fea8000, 0x000000007feab000);
+ MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000);
+ MAKE_MD( 7, 0x9, 0x00000000ff400000, 0x0000000104000000);
+#endif
+
+ bp->efi_systab = __pa(&fw_mem);
+ bp->efi_memmap = __pa(efi_memmap);
+ bp->efi_memmap_size = NUM_MEM_DESCS*sizeof(efi_memory_desc_t);
+ bp->efi_memdesc_size = sizeof(efi_memory_desc_t);
+ bp->efi_memdesc_version = 1;
+ bp->command_line = __pa(cmd_line);
+ bp->console_info.num_cols = 80;
+ bp->console_info.num_rows = 25;
+ bp->console_info.orig_x = 0;
+ bp->console_info.orig_y = 24;
+ bp->fpswa = 0;
+
+ return bp;
+}
diff --git a/arch/ia64/hp/sim/boot/ssc.h b/arch/ia64/hp/sim/boot/ssc.h
new file mode 100644
index 000000000000..3b94c03e43a9
--- /dev/null
+++ b/arch/ia64/hp/sim/boot/ssc.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef ssc_h
+#define ssc_h
+
+/* Simulator system calls: */
+
+#define SSC_CONSOLE_INIT 20
+#define SSC_GETCHAR 21
+#define SSC_PUTCHAR 31
+#define SSC_OPEN 50
+#define SSC_CLOSE 51
+#define SSC_READ 52
+#define SSC_WRITE 53
+#define SSC_GET_COMPLETION 54
+#define SSC_WAIT_COMPLETION 55
+#define SSC_CONNECT_INTERRUPT 58
+#define SSC_GENERATE_INTERRUPT 59
+#define SSC_SET_PERIODIC_INTERRUPT 60
+#define SSC_GET_RTC 65
+#define SSC_EXIT 66
+#define SSC_LOAD_SYMBOLS 69
+#define SSC_GET_TOD 74
+
+#define SSC_GET_ARGS 75
+
+/*
+ * Simulator system call.
+ */
+extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr);
+
+#endif /* ssc_h */
diff --git a/arch/ia64/hp/sim/hpsim.S b/arch/ia64/hp/sim/hpsim.S
new file mode 100644
index 000000000000..ff16e8a857d1
--- /dev/null
+++ b/arch/ia64/hp/sim/hpsim.S
@@ -0,0 +1,10 @@
+#include <asm/asmmacro.h>
+
+/*
+ * Simulator system call.
+ */
+GLOBAL_ENTRY(ia64_ssc)
+ mov r15=r36
+ break 0x80001
+ br.ret.sptk.many rp
+END(ia64_ssc)
diff --git a/arch/ia64/hp/sim/hpsim_console.c b/arch/ia64/hp/sim/hpsim_console.c
new file mode 100644
index 000000000000..5deff21e5877
--- /dev/null
+++ b/arch/ia64/hp/sim/hpsim_console.c
@@ -0,0 +1,65 @@
+/*
+ * Platform dependent support for HP simulator.
+ *
+ * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
+ */
+#include <linux/config.h>
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/pal.h>
+#include <asm/machvec.h>
+#include <asm/pgtable.h>
+#include <asm/sal.h>
+
+#include "hpsim_ssc.h"
+
+static int simcons_init (struct console *, char *);
+static void simcons_write (struct console *, const char *, unsigned);
+static struct tty_driver *simcons_console_device (struct console *, int *);
+
+struct console hpsim_cons = {
+ .name = "simcons",
+ .write = simcons_write,
+ .device = simcons_console_device,
+ .setup = simcons_init,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static int
+simcons_init (struct console *cons, char *options)
+{
+ return 0;
+}
+
+static void
+simcons_write (struct console *cons, const char *buf, unsigned count)
+{
+ unsigned long ch;
+
+ while (count-- > 0) {
+ ch = *buf++;
+ ia64_ssc(ch, 0, 0, 0, SSC_PUTCHAR);
+ if (ch == '\n')
+ ia64_ssc('\r', 0, 0, 0, SSC_PUTCHAR);
+ }
+}
+
+static struct tty_driver *simcons_console_device (struct console *c, int *index)
+{
+ extern struct tty_driver *hp_simserial_driver;
+ *index = c->index;
+ return hp_simserial_driver;
+}
diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c
new file mode 100644
index 000000000000..c0d25a2a3e9c
--- /dev/null
+++ b/arch/ia64/hp/sim/hpsim_irq.c
@@ -0,0 +1,51 @@
+/*
+ * Platform dependent support for HP simulator.
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ * Copyright (C) 1998-2001 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/irq.h>
+
+static unsigned int
+hpsim_irq_startup (unsigned int irq)
+{
+ return 0;
+}
+
+static void
+hpsim_irq_noop (unsigned int irq)
+{
+}
+
+static void
+hpsim_set_affinity_noop (unsigned int a, cpumask_t b)
+{
+}
+
+static struct hw_interrupt_type irq_type_hp_sim = {
+ .typename = "hpsim",
+ .startup = hpsim_irq_startup,
+ .shutdown = hpsim_irq_noop,
+ .enable = hpsim_irq_noop,
+ .disable = hpsim_irq_noop,
+ .ack = hpsim_irq_noop,
+ .end = hpsim_irq_noop,
+ .set_affinity = hpsim_set_affinity_noop,
+};
+
+void __init
+hpsim_irq_init (void)
+{
+ irq_desc_t *idesc;
+ int i;
+
+ for (i = 0; i < NR_IRQS; ++i) {
+ idesc = irq_descp(i);
+ if (idesc->handler == &no_irq_type)
+ idesc->handler = &irq_type_hp_sim;
+ }
+}
diff --git a/arch/ia64/hp/sim/hpsim_machvec.c b/arch/ia64/hp/sim/hpsim_machvec.c
new file mode 100644
index 000000000000..c21419359185
--- /dev/null
+++ b/arch/ia64/hp/sim/hpsim_machvec.c
@@ -0,0 +1,3 @@
+#define MACHVEC_PLATFORM_NAME hpsim
+#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpsim.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/hp/sim/hpsim_setup.c b/arch/ia64/hp/sim/hpsim_setup.c
new file mode 100644
index 000000000000..694fc86bfbd5
--- /dev/null
+++ b/arch/ia64/hp/sim/hpsim_setup.c
@@ -0,0 +1,52 @@
+/*
+ * Platform dependent support for HP simulator.
+ *
+ * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
+ */
+#include <linux/config.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/kdev_t.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/param.h>
+#include <linux/root_dev.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/pal.h>
+#include <asm/machvec.h>
+#include <asm/pgtable.h>
+#include <asm/sal.h>
+
+#include "hpsim_ssc.h"
+
+void
+ia64_ssc_connect_irq (long intr, long irq)
+{
+ ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT);
+}
+
+void
+ia64_ctl_trace (long on)
+{
+ ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE);
+}
+
+void __init
+hpsim_setup (char **cmdline_p)
+{
+ ROOT_DEV = Root_SDA1; /* default to first SCSI drive */
+
+#ifdef CONFIG_HP_SIMSERIAL_CONSOLE
+ {
+ extern struct console hpsim_cons;
+ if (ia64_platform_is("hpsim"))
+ register_console(&hpsim_cons);
+ }
+#endif
+}
diff --git a/arch/ia64/hp/sim/hpsim_ssc.h b/arch/ia64/hp/sim/hpsim_ssc.h
new file mode 100644
index 000000000000..bfa3906274b3
--- /dev/null
+++ b/arch/ia64/hp/sim/hpsim_ssc.h
@@ -0,0 +1,36 @@
+/*
+ * Platform dependent support for HP simulator.
+ *
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
+ */
+#ifndef _IA64_PLATFORM_HPSIM_SSC_H
+#define _IA64_PLATFORM_HPSIM_SSC_H
+
+/* Simulator system calls: */
+
+#define SSC_CONSOLE_INIT 20
+#define SSC_GETCHAR 21
+#define SSC_PUTCHAR 31
+#define SSC_CONNECT_INTERRUPT 58
+#define SSC_GENERATE_INTERRUPT 59
+#define SSC_SET_PERIODIC_INTERRUPT 60
+#define SSC_GET_RTC 65
+#define SSC_EXIT 66
+#define SSC_LOAD_SYMBOLS 69
+#define SSC_GET_TOD 74
+#define SSC_CTL_TRACE 76
+
+#define SSC_NETDEV_PROBE 100
+#define SSC_NETDEV_SEND 101
+#define SSC_NETDEV_RECV 102
+#define SSC_NETDEV_ATTACH 103
+#define SSC_NETDEV_DETACH 104
+
+/*
+ * Simulator system call.
+ */
+extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
+
+#endif /* _IA64_PLATFORM_HPSIM_SSC_H */
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
new file mode 100644
index 000000000000..ae84a1018a89
--- /dev/null
+++ b/arch/ia64/hp/sim/simeth.c
@@ -0,0 +1,530 @@
+/*
+ * Simulated Ethernet Driver
+ *
+ * Copyright (C) 1999-2001, 2003 Hewlett-Packard Co
+ * Stephane Eranian <eranian@hpl.hp.com>
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <linux/notifier.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+#define SIMETH_RECV_MAX 10
+
+/*
+ * Maximum possible received frame for Ethernet.
+ * We preallocate an sk_buff of that size to avoid costly
+ * memcpy for temporary buffer into sk_buff. We do basically
+ * what's done in other drivers, like eepro with a ring.
+ * The difference is, of course, that we don't have real DMA !!!
+ */
+#define SIMETH_FRAME_SIZE ETH_FRAME_LEN
+
+
+#define SSC_NETDEV_PROBE 100
+#define SSC_NETDEV_SEND 101
+#define SSC_NETDEV_RECV 102
+#define SSC_NETDEV_ATTACH 103
+#define SSC_NETDEV_DETACH 104
+
+#define NETWORK_INTR 8
+
+struct simeth_local {
+ struct net_device_stats stats;
+ int simfd; /* descriptor in the simulator */
+};
+
+static int simeth_probe1(void);
+static int simeth_open(struct net_device *dev);
+static int simeth_close(struct net_device *dev);
+static int simeth_tx(struct sk_buff *skb, struct net_device *dev);
+static int simeth_rx(struct net_device *dev);
+static struct net_device_stats *simeth_get_stats(struct net_device *dev);
+static irqreturn_t simeth_interrupt(int irq, void *dev_id, struct pt_regs * regs);
+static void set_multicast_list(struct net_device *dev);
+static int simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr);
+
+static char *simeth_version="0.3";
+
+/*
+ * This variable is used to establish a mapping between the Linux/ia64 kernel
+ * and the host linux kernel.
+ *
+ * As of today, we support only one card, even though most of the code
+ * is ready for many more. The mapping is then:
+ * linux/ia64 -> linux/x86
+ * eth0 -> eth1
+ *
+ * In the future, we some string operations, we could easily support up
+ * to 10 cards (0-9).
+ *
+ * The default mapping can be changed on the kernel command line by
+ * specifying simeth=ethX (or whatever string you want).
+ */
+static char *simeth_device="eth0"; /* default host interface to use */
+
+
+
+static volatile unsigned int card_count; /* how many cards "found" so far */
+static int simeth_debug; /* set to 1 to get debug information */
+
+/*
+ * Used to catch IFF_UP & IFF_DOWN events
+ */
+static struct notifier_block simeth_dev_notifier = {
+ simeth_device_event,
+ 0
+};
+
+
+/*
+ * Function used when using a kernel command line option.
+ *
+ * Format: simeth=interface_name (like eth0)
+ */
+static int __init
+simeth_setup(char *str)
+{
+ simeth_device = str;
+ return 1;
+}
+
+__setup("simeth=", simeth_setup);
+
+/*
+ * Function used to probe for simeth devices when not installed
+ * as a loadable module
+ */
+
+int __init
+simeth_probe (void)
+{
+ int r;
+
+ printk(KERN_INFO "simeth: v%s\n", simeth_version);
+
+ r = simeth_probe1();
+
+ if (r == 0) register_netdevice_notifier(&simeth_dev_notifier);
+
+ return r;
+}
+
+extern long ia64_ssc (long, long, long, long, int);
+extern void ia64_ssc_connect_irq (long intr, long irq);
+
+static inline int
+netdev_probe(char *name, unsigned char *ether)
+{
+ return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE);
+}
+
+
+static inline int
+netdev_connect(int irq)
+{
+ /* XXX Fix me
+ * this does not support multiple cards
+ * also no return value
+ */
+ ia64_ssc_connect_irq(NETWORK_INTR, irq);
+ return 0;
+}
+
+static inline int
+netdev_attach(int fd, int irq, unsigned int ipaddr)
+{
+ /* this puts the host interface in the right mode (start interrupting) */
+ return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH);
+}
+
+
+static inline int
+netdev_detach(int fd)
+{
+ /*
+ * inactivate the host interface (don't interrupt anymore) */
+ return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH);
+}
+
+static inline int
+netdev_send(int fd, unsigned char *buf, unsigned int len)
+{
+ return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND);
+}
+
+static inline int
+netdev_read(int fd, unsigned char *buf, unsigned int len)
+{
+ return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV);
+}
+
+/*
+ * Function shared with module code, so cannot be in init section
+ *
+ * So far this function "detects" only one card (test_&_set) but could
+ * be extended easily.
+ *
+ * Return:
+ * - -ENODEV is no device found
+ * - -ENOMEM is no more memory
+ * - 0 otherwise
+ */
+static int
+simeth_probe1(void)
+{
+ unsigned char mac_addr[ETH_ALEN];
+ struct simeth_local *local;
+ struct net_device *dev;
+ int fd, i, err;
+
+ /*
+ * XXX Fix me
+ * let's support just one card for now
+ */
+ if (test_and_set_bit(0, &card_count))
+ return -ENODEV;
+
+ /*
+ * check with the simulator for the device
+ */
+ fd = netdev_probe(simeth_device, mac_addr);
+ if (fd == -1)
+ return -ENODEV;
+
+ dev = alloc_etherdev(sizeof(struct simeth_local));
+ if (!dev)
+ return -ENOMEM;
+
+ memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr));
+
+ local = dev->priv;
+ local->simfd = fd; /* keep track of underlying file descriptor */
+
+ dev->open = simeth_open;
+ dev->stop = simeth_close;
+ dev->hard_start_xmit = simeth_tx;
+ dev->get_stats = simeth_get_stats;
+ dev->set_multicast_list = set_multicast_list; /* no yet used */
+
+ err = register_netdev(dev);
+ if (err) {
+ free_netdev(dev);
+ return err;
+ }
+
+ dev->irq = assign_irq_vector(AUTO_ASSIGN);
+
+ /*
+ * attach the interrupt in the simulator, this does enable interrupts
+ * until a netdev_attach() is called
+ */
+ netdev_connect(dev->irq);
+
+ printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr",
+ dev->name, simeth_device, local->simfd);
+ for(i = 0; i < ETH_ALEN; i++) {
+ printk(" %2.2x", dev->dev_addr[i]);
+ }
+ printk(", IRQ %d\n", dev->irq);
+
+ return 0;
+}
+
+/*
+ * actually binds the device to an interrupt vector
+ */
+static int
+simeth_open(struct net_device *dev)
+{
+ if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) {
+ printk(KERN_WARNING "simeth: unable to get IRQ %d.\n", dev->irq);
+ return -EAGAIN;
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* copied from lapbether.c */
+static __inline__ int dev_is_ethdev(struct net_device *dev)
+{
+ return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5));
+}
+
+
+/*
+ * Handler for IFF_UP or IFF_DOWN
+ *
+ * The reason for that is that we don't want to be interrupted when the
+ * interface is down. There is no way to unconnect in the simualtor. Instead
+ * we use this function to shutdown packet processing in the frame filter
+ * in the simulator. Thus no interrupts are generated
+ *
+ *
+ * That's also the place where we pass the IP address of this device to the
+ * simulator so that that we can start filtering packets for it
+ *
+ * There may be a better way of doing this, but I don't know which yet.
+ */
+static int
+simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
+{
+ struct net_device *dev = ptr;
+ struct simeth_local *local;
+ struct in_device *in_dev;
+ struct in_ifaddr **ifap = NULL;
+ struct in_ifaddr *ifa = NULL;
+ int r;
+
+
+ if ( ! dev ) {
+ printk(KERN_WARNING "simeth_device_event dev=0\n");
+ return NOTIFY_DONE;
+ }
+
+ if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
+
+ /*
+ * Check whether or not it's for an ethernet device
+ *
+ * XXX Fixme: This works only as long as we support one
+ * type of ethernet device.
+ */
+ if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE;
+
+ if ((in_dev=dev->ip_ptr) != NULL) {
+ for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; ifap=&ifa->ifa_next)
+ if (strcmp(dev->name, ifa->ifa_label) == 0) break;
+ }
+ if ( ifa == NULL ) {
+ printk(KERN_ERR "simeth_open: can't find device %s's ifa\n", dev->name);
+ return NOTIFY_DONE;
+ }
+
+ printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n",
+ dev->name, htonl(ifa->ifa_local));
+
+ /*
+ * XXX Fix me
+ * if the device was up, and we're simply reconfiguring it, not sure
+ * we get DOWN then UP.
+ */
+
+ local = dev->priv;
+ /* now do it for real */
+ r = event == NETDEV_UP ?
+ netdev_attach(local->simfd, dev->irq, htonl(ifa->ifa_local)):
+ netdev_detach(local->simfd);
+
+ printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n",
+ event == NETDEV_UP ? "attach":"detach", r);
+
+ return NOTIFY_DONE;
+}
+
+static int
+simeth_close(struct net_device *dev)
+{
+ netif_stop_queue(dev);
+
+ free_irq(dev->irq, dev);
+
+ return 0;
+}
+
+/*
+ * Only used for debug
+ */
+static void
+frame_print(unsigned char *from, unsigned char *frame, int len)
+{
+ int i;
+
+ printk("%s: (%d) %02x", from, len, frame[0] & 0xff);
+ for(i=1; i < 6; i++ ) {
+ printk(":%02x", frame[i] &0xff);
+ }
+ printk(" %2x", frame[6] &0xff);
+ for(i=7; i < 12; i++ ) {
+ printk(":%02x", frame[i] &0xff);
+ }
+ printk(" [%02x%02x]\n", frame[12], frame[13]);
+
+ for(i=14; i < len; i++ ) {
+ printk("%02x ", frame[i] &0xff);
+ if ( (i%10)==0) printk("\n");
+ }
+ printk("\n");
+}
+
+
+/*
+ * Function used to transmit of frame, very last one on the path before
+ * going to the simulator.
+ */
+static int
+simeth_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct simeth_local *local = dev->priv;
+
+#if 0
+ /* ensure we have at least ETH_ZLEN bytes (min frame size) */
+ unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ /* Where do the extra padding bytes comes from inthe skbuff ? */
+#else
+ /* the real driver in the host system is going to take care of that
+ * or maybe it's the NIC itself.
+ */
+ unsigned int length = skb->len;
+#endif
+
+ local->stats.tx_bytes += skb->len;
+ local->stats.tx_packets++;
+
+
+ if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length);
+
+ netdev_send(local->simfd, skb->data, length);
+
+ /*
+ * we are synchronous on write, so we don't simulate a
+ * trasnmit complete interrupt, thus we don't need to arm a tx
+ */
+
+ dev_kfree_skb(skb);
+ return 0;
+}
+
+static inline struct sk_buff *
+make_new_skb(struct net_device *dev)
+{
+ struct sk_buff *nskb;
+
+ /*
+ * The +2 is used to make sure that the IP header is nicely
+ * aligned (on 4byte boundary I assume 14+2=16)
+ */
+ nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2);
+ if ( nskb == NULL ) {
+ printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
+ return NULL;
+ }
+ nskb->dev = dev;
+
+ skb_reserve(nskb, 2); /* Align IP on 16 byte boundaries */
+
+ skb_put(nskb,SIMETH_FRAME_SIZE);
+
+ return nskb;
+}
+
+/*
+ * called from interrupt handler to process a received frame
+ */
+static int
+simeth_rx(struct net_device *dev)
+{
+ struct simeth_local *local;
+ struct sk_buff *skb;
+ int len;
+ int rcv_count = SIMETH_RECV_MAX;
+
+ local = dev->priv;
+ /*
+ * the loop concept has been borrowed from other drivers
+ * looks to me like it's a throttling thing to avoid pushing to many
+ * packets at one time into the stack. Making sure we can process them
+ * upstream and make forward progress overall
+ */
+ do {
+ if ( (skb=make_new_skb(dev)) == NULL ) {
+ printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
+ local->stats.rx_dropped++;
+ return 0;
+ }
+ /*
+ * Read only one frame at a time
+ */
+ len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE);
+ if ( len == 0 ) {
+ if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: count=%d netdev_read=0\n",
+ dev->name, SIMETH_RECV_MAX-rcv_count);
+ break;
+ }
+#if 0
+ /*
+ * XXX Fix me
+ * Should really do a csum+copy here
+ */
+ memcpy(skb->data, frame, len);
+#endif
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, len);
+
+ /*
+ * push the packet up & trigger software interrupt
+ */
+ netif_rx(skb);
+
+ local->stats.rx_packets++;
+ local->stats.rx_bytes += len;
+
+ } while ( --rcv_count );
+
+ return len; /* 0 = nothing left to read, otherwise, we can try again */
+}
+
+/*
+ * Interrupt handler (Yes, we can do it too !!!)
+ */
+static irqreturn_t
+simeth_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct net_device *dev = dev_id;
+
+ if ( dev == NULL ) {
+ printk(KERN_WARNING "simeth: irq %d for unknown device\n", irq);
+ return IRQ_NONE;
+ }
+
+ /*
+ * very simple loop because we get interrupts only when receiving
+ */
+ while (simeth_rx(dev));
+ return IRQ_HANDLED;
+}
+
+static struct net_device_stats *
+simeth_get_stats(struct net_device *dev)
+{
+ struct simeth_local *local = dev->priv;
+
+ return &local->stats;
+}
+
+/* fake multicast ability */
+static void
+set_multicast_list(struct net_device *dev)
+{
+ printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name);
+}
+
+__initcall(simeth_probe);
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
new file mode 100644
index 000000000000..56405dbfd739
--- /dev/null
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -0,0 +1,404 @@
+/*
+ * Simulated SCSI driver.
+ *
+ * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 02/01/15 David Mosberger Updated for v2.5.1
+ * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33
+ */
+#include <linux/blkdev.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <asm/irq.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#define DEBUG_SIMSCSI 0
+
+#define SIMSCSI_REQ_QUEUE_LEN 64
+#define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd"
+
+/* Simulator system calls: */
+
+#define SSC_OPEN 50
+#define SSC_CLOSE 51
+#define SSC_READ 52
+#define SSC_WRITE 53
+#define SSC_GET_COMPLETION 54
+#define SSC_WAIT_COMPLETION 55
+
+#define SSC_WRITE_ACCESS 2
+#define SSC_READ_ACCESS 1
+
+#if DEBUG_SIMSCSI
+ int simscsi_debug;
+# define DBG simscsi_debug
+#else
+# define DBG 0
+#endif
+
+static struct Scsi_Host *host;
+
+static void simscsi_interrupt (unsigned long val);
+static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0);
+
+struct disk_req {
+ unsigned long addr;
+ unsigned len;
+};
+
+struct disk_stat {
+ int fd;
+ unsigned count;
+};
+
+extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
+
+static int desc[16] = {
+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
+static struct queue_entry {
+ struct scsi_cmnd *sc;
+} queue[SIMSCSI_REQ_QUEUE_LEN];
+
+static int rd, wr;
+static atomic_t num_reqs = ATOMIC_INIT(0);
+
+/* base name for default disks */
+static char *simscsi_root = DEFAULT_SIMSCSI_ROOT;
+
+#define MAX_ROOT_LEN 128
+
+/*
+ * used to setup a new base for disk images
+ * to use /foo/bar/disk[a-z] as disk images
+ * you have to specify simscsi=/foo/bar/disk on the command line
+ */
+static int __init
+simscsi_setup (char *s)
+{
+ /* XXX Fix me we may need to strcpy() ? */
+ if (strlen(s) > MAX_ROOT_LEN) {
+ printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n",
+ simscsi_root);
+ }
+ simscsi_root = s;
+ return 1;
+}
+
+__setup("simscsi=", simscsi_setup);
+
+static void
+simscsi_interrupt (unsigned long val)
+{
+ struct scsi_cmnd *sc;
+
+ while ((sc = queue[rd].sc) != 0) {
+ atomic_dec(&num_reqs);
+ queue[rd].sc = 0;
+ if (DBG)
+ printk("simscsi_interrupt: done with %ld\n", sc->serial_number);
+ (*sc->scsi_done)(sc);
+ rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN;
+ }
+}
+
+static int
+simscsi_biosparam (struct scsi_device *sdev, struct block_device *n,
+ sector_t capacity, int ip[])
+{
+ ip[0] = 64; /* heads */
+ ip[1] = 32; /* sectors */
+ ip[2] = capacity >> 11; /* cylinders */
+ return 0;
+}
+
+static void
+simscsi_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset, unsigned long len)
+{
+ struct disk_stat stat;
+ struct disk_req req;
+
+ req.addr = __pa(sc->request_buffer);
+ req.len = len; /* # of bytes to transfer */
+
+ if (sc->request_bufflen < req.len)
+ return;
+
+ stat.fd = desc[sc->device->id];
+ if (DBG)
+ printk("simscsi_%s @ %lx (off %lx)\n",
+ mode == SSC_READ ? "read":"write", req.addr, offset);
+ ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
+ ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
+
+ if (stat.count == req.len) {
+ sc->result = GOOD;
+ } else {
+ sc->result = DID_ERROR << 16;
+ }
+}
+
+static void
+simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset)
+{
+ int list_len = sc->use_sg;
+ struct scatterlist *sl = (struct scatterlist *)sc->buffer;
+ struct disk_stat stat;
+ struct disk_req req;
+
+ stat.fd = desc[sc->device->id];
+
+ while (list_len) {
+ req.addr = __pa(page_address(sl->page) + sl->offset);
+ req.len = sl->length;
+ if (DBG)
+ printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n",
+ mode == SSC_READ ? "read":"write", req.addr, offset,
+ list_len, sl->length);
+ ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
+ ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
+
+ /* should not happen in our case */
+ if (stat.count != req.len) {
+ sc->result = DID_ERROR << 16;
+ return;
+ }
+ offset += sl->length;
+ sl++;
+ list_len--;
+ }
+ sc->result = GOOD;
+}
+
+/*
+ * function handling both READ_6/WRITE_6 (non-scatter/gather mode)
+ * commands.
+ * Added 02/26/99 S.Eranian
+ */
+static void
+simscsi_readwrite6 (struct scsi_cmnd *sc, int mode)
+{
+ unsigned long offset;
+
+ offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512;
+ if (sc->use_sg > 0)
+ simscsi_sg_readwrite(sc, mode, offset);
+ else
+ simscsi_readwrite(sc, mode, offset, sc->cmnd[4]*512);
+}
+
+static size_t
+simscsi_get_disk_size (int fd)
+{
+ struct disk_stat stat;
+ size_t bit, sectors = 0;
+ struct disk_req req;
+ char buf[512];
+
+ /*
+ * This is a bit kludgey: the simulator doesn't provide a direct way of determining
+ * the disk size, so we do a binary search, assuming a maximum disk size of 4GB.
+ */
+ for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) {
+ req.addr = __pa(&buf);
+ req.len = sizeof(buf);
+ ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
+ stat.fd = fd;
+ ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
+ if (stat.count == sizeof(buf))
+ sectors |= bit;
+ }
+ return sectors - 1; /* return last valid sector number */
+}
+
+static void
+simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
+{
+ unsigned long offset;
+
+ offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
+ | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512;
+ if (sc->use_sg > 0)
+ simscsi_sg_readwrite(sc, mode, offset);
+ else
+ simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512);
+}
+
+static int
+simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+{
+ unsigned int target_id = sc->device->id;
+ char fname[MAX_ROOT_LEN+16];
+ size_t disk_size;
+ char *buf;
+#if DEBUG_SIMSCSI
+ register long sp asm ("sp");
+
+ if (DBG)
+ printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n",
+ target_id, sc->cmnd[0], sc->serial_number, sp, done);
+#endif
+
+ sc->result = DID_BAD_TARGET << 16;
+ sc->scsi_done = done;
+ if (target_id <= 15 && sc->device->lun == 0) {
+ switch (sc->cmnd[0]) {
+ case INQUIRY:
+ if (sc->request_bufflen < 35) {
+ break;
+ }
+ sprintf (fname, "%s%c", simscsi_root, 'a' + target_id);
+ desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS,
+ 0, 0, SSC_OPEN);
+ if (desc[target_id] < 0) {
+ /* disk doesn't exist... */
+ break;
+ }
+ buf = sc->request_buffer;
+ buf[0] = 0; /* magnetic disk */
+ buf[1] = 0; /* not a removable medium */
+ buf[2] = 2; /* SCSI-2 compliant device */
+ buf[3] = 2; /* SCSI-2 response data format */
+ buf[4] = 31; /* additional length (bytes) */
+ buf[5] = 0; /* reserved */
+ buf[6] = 0; /* reserved */
+ buf[7] = 0; /* various flags */
+ memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28);
+ sc->result = GOOD;
+ break;
+
+ case TEST_UNIT_READY:
+ sc->result = GOOD;
+ break;
+
+ case READ_6:
+ if (desc[target_id] < 0 )
+ break;
+ simscsi_readwrite6(sc, SSC_READ);
+ break;
+
+ case READ_10:
+ if (desc[target_id] < 0 )
+ break;
+ simscsi_readwrite10(sc, SSC_READ);
+ break;
+
+ case WRITE_6:
+ if (desc[target_id] < 0)
+ break;
+ simscsi_readwrite6(sc, SSC_WRITE);
+ break;
+
+ case WRITE_10:
+ if (desc[target_id] < 0)
+ break;
+ simscsi_readwrite10(sc, SSC_WRITE);
+ break;
+
+
+ case READ_CAPACITY:
+ if (desc[target_id] < 0 || sc->request_bufflen < 8) {
+ break;
+ }
+ buf = sc->request_buffer;
+
+ disk_size = simscsi_get_disk_size(desc[target_id]);
+
+ /* pretend to be a 1GB disk (partition table contains real stuff): */
+ buf[0] = (disk_size >> 24) & 0xff;
+ buf[1] = (disk_size >> 16) & 0xff;
+ buf[2] = (disk_size >> 8) & 0xff;
+ buf[3] = (disk_size >> 0) & 0xff;
+ /* set block size of 512 bytes: */
+ buf[4] = 0;
+ buf[5] = 0;
+ buf[6] = 2;
+ buf[7] = 0;
+ sc->result = GOOD;
+ break;
+
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ /* sd.c uses this to determine whether disk does write-caching. */
+ memset(sc->request_buffer, 0, 128);
+ sc->result = GOOD;
+ break;
+
+ case START_STOP:
+ printk(KERN_ERR "START_STOP\n");
+ break;
+
+ default:
+ panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]);
+ }
+ }
+ if (sc->result == DID_BAD_TARGET) {
+ sc->result |= DRIVER_SENSE << 24;
+ sc->sense_buffer[0] = 0x70;
+ sc->sense_buffer[2] = 0x00;
+ }
+ if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) {
+ panic("Attempt to queue command while command is pending!!");
+ }
+ atomic_inc(&num_reqs);
+ queue[wr].sc = sc;
+ wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN;
+
+ tasklet_schedule(&simscsi_tasklet);
+ return 0;
+}
+
+static int
+simscsi_host_reset (struct scsi_cmnd *sc)
+{
+ printk(KERN_ERR "simscsi_host_reset: not implemented\n");
+ return 0;
+}
+
+static struct scsi_host_template driver_template = {
+ .name = "simulated SCSI host adapter",
+ .proc_name = "simscsi",
+ .queuecommand = simscsi_queuecommand,
+ .eh_host_reset_handler = simscsi_host_reset,
+ .bios_param = simscsi_biosparam,
+ .can_queue = SIMSCSI_REQ_QUEUE_LEN,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = 1024,
+ .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN,
+ .use_clustering = DISABLE_CLUSTERING,
+};
+
+static int __init
+simscsi_init(void)
+{
+ int error;
+
+ host = scsi_host_alloc(&driver_template, 0);
+ if (!host)
+ return -ENOMEM;
+
+ error = scsi_add_host(host, NULL);
+ if (!error)
+ scsi_scan_host(host);
+ return error;
+}
+
+static void __exit
+simscsi_exit(void)
+{
+ scsi_remove_host(host);
+ scsi_host_put(host);
+}
+
+module_init(simscsi_init);
+module_exit(simscsi_exit);
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
new file mode 100644
index 000000000000..786e70718ce4
--- /dev/null
+++ b/arch/ia64/hp/sim/simserial.c
@@ -0,0 +1,1032 @@
+/*
+ * Simulated Serial Driver (fake serial)
+ *
+ * This driver is mostly used for bringup purposes and will go away.
+ * It has a strong dependency on the system console. All outputs
+ * are rerouted to the same facility as the one used by printk which, in our
+ * case means sys_sim.c console (goes via the simulator). The code hereafter
+ * is completely leveraged from the serial.c driver.
+ *
+ * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
+ * Stephane Eranian <eranian@hpl.hp.com>
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/04/00 D. Mosberger Merged in serial.c bug fixes in rs_close().
+ * 02/25/00 D. Mosberger Synced up with 2.3.99pre-5 version of serial.c.
+ * 07/30/02 D. Mosberger Replace sti()/cli() with explicit spinlocks & local irq masking
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+
+#include <asm/irq.h>
+#include <asm/hw_irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_KDB
+# include <linux/kdb.h>
+#endif
+
+#undef SIMSERIAL_DEBUG /* define this to get some debug information */
+
+#define KEYBOARD_INTR 3 /* must match with simulator! */
+
+#define NR_PORTS 1 /* only one port for now */
+#define SERIAL_INLINE 1
+
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#endif
+
+#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
+
+#define SSC_GETCHAR 21
+
+extern long ia64_ssc (long, long, long, long, int);
+extern void ia64_ssc_connect_irq (long intr, long irq);
+
+static char *serial_name = "SimSerial driver";
+static char *serial_version = "0.6";
+
+/*
+ * This has been extracted from asm/serial.h. We need one eventually but
+ * I don't know exactly what we're going to put in it so just fake one
+ * for now.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+/*
+ * Most of the values here are meaningless to this particular driver.
+ * However some values must be preserved for the code (leveraged from serial.c
+ * to work correctly).
+ * port must not be 0
+ * type must not be UNKNOWN
+ * So I picked arbitrary (guess from where?) values instead
+ */
+static struct serial_state rs_table[NR_PORTS]={
+ /* UART CLK PORT IRQ FLAGS */
+ { 0, BASE_BAUD, 0x3F8, 0, STD_COM_FLAGS,0,PORT_16550 } /* ttyS0 */
+};
+
+/*
+ * Just for the fun of it !
+ */
+static struct serial_uart_config uart_config[] = {
+ { "unknown", 1, 0 },
+ { "8250", 1, 0 },
+ { "16450", 1, 0 },
+ { "16550", 1, 0 },
+ { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
+ { "cirrus", 1, 0 },
+ { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
+ { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
+ UART_STARTECH },
+ { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
+ { 0, 0}
+};
+
+struct tty_driver *hp_simserial_driver;
+
+static struct async_struct *IRQ_ports[NR_IRQS];
+
+static struct console *console;
+
+static unsigned char *tmp_buf;
+static DECLARE_MUTEX(tmp_buf_sem);
+
+extern struct console *console_drivers; /* from kernel/printk.c */
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rs_stop(struct tty_struct *tty)
+{
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_stop: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
+ tty->stopped, tty->hw_stopped, tty->flow_stopped);
+#endif
+
+}
+
+static void rs_start(struct tty_struct *tty)
+{
+#if SIMSERIAL_DEBUG
+ printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
+ tty->stopped, tty->hw_stopped, tty->flow_stopped);
+#endif
+}
+
+static void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
+{
+ unsigned char ch;
+ static unsigned char seen_esc = 0;
+
+ while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
+ if ( ch == 27 && seen_esc == 0 ) {
+ seen_esc = 1;
+ continue;
+ } else {
+ if ( seen_esc==1 && ch == 'O' ) {
+ seen_esc = 2;
+ continue;
+ } else if ( seen_esc == 2 ) {
+ if ( ch == 'P' ) show_state(); /* F1 key */
+#ifdef CONFIG_KDB
+ if ( ch == 'S' )
+ kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs);
+#endif
+
+ seen_esc = 0;
+ continue;
+ }
+ }
+ seen_esc = 0;
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) break;
+
+ *tty->flip.char_buf_ptr = ch;
+
+ *tty->flip.flag_buf_ptr = 0;
+
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * This is the serial driver's interrupt routine for a single port
+ */
+static irqreturn_t rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct async_struct * info;
+
+ /*
+ * I don't know exactly why they don't use the dev_id opaque data
+ * pointer instead of this extra lookup table
+ */
+ info = IRQ_ports[irq];
+ if (!info || !info->tty) {
+ printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
+ return IRQ_NONE;
+ }
+ /*
+ * pretty simple in our case, because we only get interrupts
+ * on inbound traffic
+ */
+ receive_chars(info->tty, regs);
+ return IRQ_HANDLED;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+#if 0
+/*
+ * not really used in our situation so keep them commented out for now
+ */
+static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
+static void do_serial_bh(void)
+{
+ run_task_queue(&tq_serial);
+ printk(KERN_ERR "do_serial_bh: called\n");
+}
+#endif
+
+static void do_softint(void *private_)
+{
+ printk(KERN_ERR "simserial: do_softint called\n");
+}
+
+static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (!tty || !info->xmit.buf) return;
+
+ local_irq_save(flags);
+ if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
+ local_irq_restore(flags);
+ return;
+ }
+ info->xmit.buf[info->xmit.head] = ch;
+ info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
+ local_irq_restore(flags);
+}
+
+static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done)
+{
+ int count;
+ unsigned long flags;
+
+
+ local_irq_save(flags);
+
+ if (info->x_char) {
+ char c = info->x_char;
+
+ console->write(console, &c, 1);
+
+ info->state->icount.tx++;
+ info->x_char = 0;
+
+ goto out;
+ }
+
+ if (info->xmit.head == info->xmit.tail || info->tty->stopped || info->tty->hw_stopped) {
+#ifdef SIMSERIAL_DEBUG
+ printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
+ info->xmit.head, info->xmit.tail, info->tty->stopped);
+#endif
+ goto out;
+ }
+ /*
+ * We removed the loop and try to do it in to chunks. We need
+ * 2 operations maximum because it's a ring buffer.
+ *
+ * First from current to tail if possible.
+ * Then from the beginning of the buffer until necessary
+ */
+
+ count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
+ SERIAL_XMIT_SIZE - info->xmit.tail);
+ console->write(console, info->xmit.buf+info->xmit.tail, count);
+
+ info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
+
+ /*
+ * We have more at the beginning of the buffer
+ */
+ count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+ if (count) {
+ console->write(console, info->xmit.buf, count);
+ info->xmit.tail += count;
+ }
+out:
+ local_irq_restore(flags);
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ if (info->xmit.head == info->xmit.tail || tty->stopped || tty->hw_stopped ||
+ !info->xmit.buf)
+ return;
+
+ transmit_chars(info, NULL);
+}
+
+
+static int rs_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ int c, ret = 0;
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (!tty || !info->xmit.buf || !tmp_buf) return 0;
+
+ local_irq_save(flags);
+ while (1) {
+ c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0) {
+ break;
+ }
+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
+ info->xmit.head = ((info->xmit.head + c) &
+ (SERIAL_XMIT_SIZE-1));
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ local_irq_restore(flags);
+ /*
+ * Hey, we transmit directly from here in our case
+ */
+ if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE)
+ && !tty->stopped && !tty->hw_stopped) {
+ transmit_chars(info, NULL);
+ }
+ return ret;
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static void rs_flush_buffer(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ info->xmit.head = info->xmit.tail = 0;
+ local_irq_restore(flags);
+
+ wake_up_interruptible(&tty->write_wait);
+
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void rs_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ info->x_char = ch;
+ if (ch) {
+ /*
+ * I guess we could call console->write() directly but
+ * let's do that for now.
+ */
+ transmit_chars(info, NULL);
+ }
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_throttle(struct tty_struct * tty)
+{
+ if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty));
+
+ printk(KERN_INFO "simrs_throttle called\n");
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ rs_send_xchar(tty, START_CHAR(tty));
+ }
+ printk(KERN_INFO "simrs_unthrottle called\n");
+}
+
+/*
+ * rs_break() --- routine which turns the break handling on or off
+ */
+static void rs_break(struct tty_struct *tty, int break_state)
+{
+}
+
+static int rs_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TIOCMGET:
+ printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
+ return -EINVAL;
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
+ return -EINVAL;
+ case TIOCGSERIAL:
+ printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
+ return 0;
+ case TIOCSSERIAL:
+ printk(KERN_INFO "simrs_ioctl TIOCSSERIAL called\n");
+ return 0;
+ case TIOCSERCONFIG:
+ printk(KERN_INFO "rs_ioctl: TIOCSERCONFIG called\n");
+ return -EINVAL;
+
+ case TIOCSERGETLSR: /* Get line status register */
+ printk(KERN_INFO "rs_ioctl: TIOCSERGETLSR called\n");
+ return -EINVAL;
+
+ case TIOCSERGSTRUCT:
+ printk(KERN_INFO "rs_ioctl: TIOCSERGSTRUCT called\n");
+#if 0
+ if (copy_to_user((struct async_struct *) arg,
+ info, sizeof(struct async_struct)))
+ return -EFAULT;
+#endif
+ return 0;
+
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+ printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
+ return 0;
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
+ return 0;
+
+ case TIOCSERGWILD:
+ case TIOCSERSWILD:
+ /* "setserial -W" is called in Debian boot */
+ printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ unsigned int cflag = tty->termios->c_cflag;
+
+ if ( (cflag == old_termios->c_cflag)
+ && ( RELEVANT_IFLAG(tty->termios->c_iflag)
+ == RELEVANT_IFLAG(old_termios->c_iflag)))
+ return;
+
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ rs_start(tty);
+ }
+}
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(struct async_struct * info)
+{
+ unsigned long flags;
+ struct serial_state *state;
+ int retval;
+
+ if (!(info->flags & ASYNC_INITIALIZED)) return;
+
+ state = info->state;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("Shutting down serial port %d (irq %d)....", info->line,
+ state->irq);
+#endif
+
+ local_irq_save(flags);
+ {
+ /*
+ * First unlink the serial port from the IRQ chain...
+ */
+ if (info->next_port)
+ info->next_port->prev_port = info->prev_port;
+ if (info->prev_port)
+ info->prev_port->next_port = info->next_port;
+ else
+ IRQ_ports[state->irq] = info->next_port;
+
+ /*
+ * Free the IRQ, if necessary
+ */
+ if (state->irq && (!IRQ_ports[state->irq] ||
+ !IRQ_ports[state->irq]->next_port)) {
+ if (IRQ_ports[state->irq]) {
+ free_irq(state->irq, NULL);
+ retval = request_irq(state->irq, rs_interrupt_single,
+ IRQ_T(info), "serial", NULL);
+
+ if (retval)
+ printk(KERN_ERR "serial shutdown: request_irq: error %d"
+ " Couldn't reacquire IRQ.\n", retval);
+ } else
+ free_irq(state->irq, NULL);
+ }
+
+ if (info->xmit.buf) {
+ free_page((unsigned long) info->xmit.buf);
+ info->xmit.buf = 0;
+ }
+
+ if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct serial_state *state;
+ unsigned long flags;
+
+ if (!info ) return;
+
+ state = info->state;
+
+ local_irq_save(flags);
+ if (tty_hung_up_p(filp)) {
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_close: hung_up\n");
+#endif
+ local_irq_restore(flags);
+ return;
+ }
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_close ttys%d, count = %d\n", info->line, state->count);
+#endif
+ if ((tty->count == 1) && (state->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. state->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk(KERN_ERR "rs_close: bad serial port count; tty->count is 1, "
+ "state->count is %d\n", state->count);
+ state->count = 1;
+ }
+ if (--state->count < 0) {
+ printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
+ info->line, state->count);
+ state->count = 0;
+ }
+ if (state->count) {
+ local_irq_restore(flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+ local_irq_restore(flags);
+
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ shutdown(info);
+ if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty);
+ if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+ info->event = 0;
+ info->tty = 0;
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(info->close_delay);
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+}
+
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rs_hangup(struct tty_struct *tty)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct serial_state *state = info->state;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_hangup: called\n");
+#endif
+
+ state = info->state;
+
+ rs_flush_buffer(tty);
+ if (info->flags & ASYNC_CLOSING)
+ return;
+ shutdown(info);
+
+ info->event = 0;
+ state->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = 0;
+ wake_up_interruptible(&info->open_wait);
+}
+
+
+static int get_async_struct(int line, struct async_struct **ret_info)
+{
+ struct async_struct *info;
+ struct serial_state *sstate;
+
+ sstate = rs_table + line;
+ sstate->count++;
+ if (sstate->info) {
+ *ret_info = sstate->info;
+ return 0;
+ }
+ info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
+ if (!info) {
+ sstate->count--;
+ return -ENOMEM;
+ }
+ memset(info, 0, sizeof(struct async_struct));
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->delta_msr_wait);
+ info->magic = SERIAL_MAGIC;
+ info->port = sstate->port;
+ info->flags = sstate->flags;
+ info->xmit_fifo_size = sstate->xmit_fifo_size;
+ info->line = line;
+ INIT_WORK(&info->work, do_softint, info);
+ info->state = sstate;
+ if (sstate->info) {
+ kfree(info);
+ *ret_info = sstate->info;
+ return 0;
+ }
+ *ret_info = sstate->info = info;
+ return 0;
+}
+
+static int
+startup(struct async_struct *info)
+{
+ unsigned long flags;
+ int retval=0;
+ irqreturn_t (*handler)(int, void *, struct pt_regs *);
+ struct serial_state *state= info->state;
+ unsigned long page;
+
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ local_irq_save(flags);
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ free_page(page);
+ goto errout;
+ }
+
+ if (!state->port || !state->type) {
+ if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+ free_page(page);
+ goto errout;
+ }
+ if (info->xmit.buf)
+ free_page(page);
+ else
+ info->xmit.buf = (unsigned char *) page;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("startup: ttys%d (irq %d)...", info->line, state->irq);
+#endif
+
+ /*
+ * Allocate the IRQ if necessary
+ */
+ if (state->irq && (!IRQ_ports[state->irq] ||
+ !IRQ_ports[state->irq]->next_port)) {
+ if (IRQ_ports[state->irq]) {
+ retval = -EBUSY;
+ goto errout;
+ } else
+ handler = rs_interrupt_single;
+
+ retval = request_irq(state->irq, handler, IRQ_T(info), "simserial", NULL);
+ if (retval) {
+ if (capable(CAP_SYS_ADMIN)) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR,
+ &info->tty->flags);
+ retval = 0;
+ }
+ goto errout;
+ }
+ }
+
+ /*
+ * Insert serial port into IRQ chain.
+ */
+ info->prev_port = 0;
+ info->next_port = IRQ_ports[state->irq];
+ if (info->next_port)
+ info->next_port->prev_port = info;
+ IRQ_ports[state->irq] = info;
+
+ if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->xmit.head = info->xmit.tail = 0;
+
+#if 0
+ /*
+ * Set up serial timers...
+ */
+ timer_table[RS_TIMER].expires = jiffies + 2*HZ/100;
+ timer_active |= 1 << RS_TIMER;
+#endif
+
+ /*
+ * Set up the tty->alt_speed kludge
+ */
+ if (info->tty) {
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
+ }
+
+ info->flags |= ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+ return 0;
+
+errout:
+ local_irq_restore(flags);
+ return retval;
+}
+
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int rs_open(struct tty_struct *tty, struct file * filp)
+{
+ struct async_struct *info;
+ int retval, line;
+ unsigned long page;
+
+ line = tty->index;
+ if ((line < 0) || (line >= NR_PORTS))
+ return -ENODEV;
+ retval = get_async_struct(line, &info);
+ if (retval)
+ return retval;
+ tty->driver_data = info;
+ info->tty = tty;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_open %s, count = %d\n", tty->name, info->state->count);
+#endif
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ if (!tmp_buf) {
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+ if (tmp_buf)
+ free_page(page);
+ else
+ tmp_buf = (unsigned char *) page;
+ }
+
+ /*
+ * If the port is the middle of closing, bail out now
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval) {
+ return retval;
+ }
+
+ /*
+ * figure out which console to use (should be one already)
+ */
+ console = console_drivers;
+ while (console) {
+ if ((console->flags & CON_ENABLED) && console->write) break;
+ console = console->next;
+ }
+
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_open ttys%d successful\n", info->line);
+#endif
+ return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline int line_info(char *buf, struct serial_state *state)
+{
+ return sprintf(buf, "%d: uart:%s port:%lX irq:%d\n",
+ state->line, uart_config[state->type].name,
+ state->port, state->irq);
+}
+
+static int rs_read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ int i, len = 0, l;
+ off_t begin = 0;
+
+ len += sprintf(page, "simserinfo:1.0 driver:%s\n", serial_version);
+ for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ l = line_info(page + len, &rs_table[i]);
+ len += l;
+ if (len+begin > off+count)
+ goto done;
+ if (len+begin < off) {
+ begin += len;
+ len = 0;
+ }
+ }
+ *eof = 1;
+done:
+ if (off >= len+begin)
+ return 0;
+ *start = page + (begin-off);
+ return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/*
+ * ---------------------------------------------------------------------
+ * rs_init() and friends
+ *
+ * rs_init() is called at boot-time to initialize the serial driver.
+ * ---------------------------------------------------------------------
+ */
+
+/*
+ * This routine prints out the appropriate serial driver version
+ * number, and identifies which options were configured into this
+ * driver.
+ */
+static inline void show_serial_version(void)
+{
+ printk(KERN_INFO "%s version %s with", serial_name, serial_version);
+ printk(KERN_INFO " no serial options enabled\n");
+}
+
+static struct tty_operations hp_ops = {
+ .open = rs_open,
+ .close = rs_close,
+ .write = rs_write,
+ .put_char = rs_put_char,
+ .flush_chars = rs_flush_chars,
+ .write_room = rs_write_room,
+ .chars_in_buffer = rs_chars_in_buffer,
+ .flush_buffer = rs_flush_buffer,
+ .ioctl = rs_ioctl,
+ .throttle = rs_throttle,
+ .unthrottle = rs_unthrottle,
+ .send_xchar = rs_send_xchar,
+ .set_termios = rs_set_termios,
+ .stop = rs_stop,
+ .start = rs_start,
+ .hangup = rs_hangup,
+ .break_ctl = rs_break,
+ .wait_until_sent = rs_wait_until_sent,
+ .read_proc = rs_read_proc,
+};
+
+/*
+ * The serial driver boot-time initialization code!
+ */
+static int __init
+simrs_init (void)
+{
+ int i;
+ struct serial_state *state;
+
+ if (!ia64_platform_is("hpsim"))
+ return -ENODEV;
+
+ hp_simserial_driver = alloc_tty_driver(1);
+ if (!hp_simserial_driver)
+ return -ENOMEM;
+
+ show_serial_version();
+
+ /* Initialize the tty_driver structure */
+
+ hp_simserial_driver->owner = THIS_MODULE;
+ hp_simserial_driver->driver_name = "simserial";
+ hp_simserial_driver->name = "ttyS";
+ hp_simserial_driver->major = TTY_MAJOR;
+ hp_simserial_driver->minor_start = 64;
+ hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
+ hp_simserial_driver->init_termios = tty_std_termios;
+ hp_simserial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(hp_simserial_driver, &hp_ops);
+
+ /*
+ * Let's have a little bit of fun !
+ */
+ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
+
+ if (state->type == PORT_UNKNOWN) continue;
+
+ if (!state->irq) {
+ state->irq = assign_irq_vector(AUTO_ASSIGN);
+ ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
+ }
+
+ printk(KERN_INFO "ttyS%d at 0x%04lx (irq = %d) is a %s\n",
+ state->line,
+ state->port, state->irq,
+ uart_config[state->type].name);
+ }
+
+ if (tty_register_driver(hp_simserial_driver))
+ panic("Couldn't register simserial driver\n");
+
+ return 0;
+}
+
+#ifndef MODULE
+__initcall(simrs_init);
+#endif
diff --git a/arch/ia64/hp/zx1/Makefile b/arch/ia64/hp/zx1/Makefile
new file mode 100644
index 000000000000..61e878729d1e
--- /dev/null
+++ b/arch/ia64/hp/zx1/Makefile
@@ -0,0 +1,8 @@
+#
+# ia64/hp/zx1/Makefile
+#
+# Copyright (C) 2002 Hewlett Packard
+# Copyright (C) Alex Williamson (alex_williamson@hp.com)
+#
+
+obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o hpzx1_swiotlb_machvec.o
diff --git a/arch/ia64/hp/zx1/hpzx1_machvec.c b/arch/ia64/hp/zx1/hpzx1_machvec.c
new file mode 100644
index 000000000000..32518b0f923e
--- /dev/null
+++ b/arch/ia64/hp/zx1/hpzx1_machvec.c
@@ -0,0 +1,3 @@
+#define MACHVEC_PLATFORM_NAME hpzx1
+#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpzx1.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c b/arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c
new file mode 100644
index 000000000000..4392a96b3c58
--- /dev/null
+++ b/arch/ia64/hp/zx1/hpzx1_swiotlb_machvec.c
@@ -0,0 +1,3 @@
+#define MACHVEC_PLATFORM_NAME hpzx1_swiotlb
+#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpzx1_swiotlb.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/ia32/Makefile b/arch/ia64/ia32/Makefile
new file mode 100644
index 000000000000..2ed90da81166
--- /dev/null
+++ b/arch/ia64/ia32/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the ia32 kernel emulation subsystem.
+#
+
+obj-y := ia32_entry.o sys_ia32.o ia32_ioctl.o ia32_signal.o \
+ ia32_support.o ia32_traps.o binfmt_elf32.o ia32_ldt.o
+
+CFLAGS_ia32_ioctl.o += -Ifs/
+
+# Don't let GCC uses f16-f31 so that save_ia32_fpstate_live() and
+# restore_ia32_fpstate_live() can be sure the live register contain user-level state.
+CFLAGS_ia32_signal.o += -mfixed-range=f16-f31
diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
new file mode 100644
index 000000000000..31de70b7c67f
--- /dev/null
+++ b/arch/ia64/ia32/binfmt_elf32.c
@@ -0,0 +1,294 @@
+/*
+ * IA-32 ELF support.
+ *
+ * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
+ * Copyright (C) 2001 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 06/16/00 A. Mallick initialize csd/ssd/tssd/cflg for ia32_load_state
+ * 04/13/01 D. Mosberger dropped saving tssd in ar.k1---it's not needed
+ * 09/14/01 D. Mosberger fixed memory management for gdt/tss page
+ */
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/security.h>
+
+#include <asm/param.h>
+#include <asm/signal.h>
+
+#include "ia32priv.h"
+#include "elfcore32.h"
+
+/* Override some function names */
+#undef start_thread
+#define start_thread ia32_start_thread
+#define elf_format elf32_format
+#define init_elf_binfmt init_elf32_binfmt
+#define exit_elf_binfmt exit_elf32_binfmt
+
+#undef CLOCKS_PER_SEC
+#define CLOCKS_PER_SEC IA32_CLOCKS_PER_SEC
+
+extern void ia64_elf32_init (struct pt_regs *regs);
+
+static void elf32_set_personality (void);
+
+#define setup_arg_pages(bprm,tos,exec) ia32_setup_arg_pages(bprm,exec)
+#define elf_map elf32_map
+
+#undef SET_PERSONALITY
+#define SET_PERSONALITY(ex, ibcs2) elf32_set_personality()
+
+#define elf_read_implies_exec(ex, have_pt_gnu_stack) (!(have_pt_gnu_stack))
+
+/* Ugly but avoids duplication */
+#include "../../../fs/binfmt_elf.c"
+
+extern struct page *ia32_shared_page[];
+extern unsigned long *ia32_gdt;
+extern struct page *ia32_gate_page;
+
+struct page *
+ia32_install_shared_page (struct vm_area_struct *vma, unsigned long address, int *type)
+{
+ struct page *pg = ia32_shared_page[smp_processor_id()];
+ get_page(pg);
+ if (type)
+ *type = VM_FAULT_MINOR;
+ return pg;
+}
+
+struct page *
+ia32_install_gate_page (struct vm_area_struct *vma, unsigned long address, int *type)
+{
+ struct page *pg = ia32_gate_page;
+ get_page(pg);
+ if (type)
+ *type = VM_FAULT_MINOR;
+ return pg;
+}
+
+
+static struct vm_operations_struct ia32_shared_page_vm_ops = {
+ .nopage = ia32_install_shared_page
+};
+
+static struct vm_operations_struct ia32_gate_page_vm_ops = {
+ .nopage = ia32_install_gate_page
+};
+
+void
+ia64_elf32_init (struct pt_regs *regs)
+{
+ struct vm_area_struct *vma;
+
+ /*
+ * Map GDT below 4GB, where the processor can find it. We need to map
+ * it with privilege level 3 because the IVE uses non-privileged accesses to these
+ * tables. IA-32 segmentation is used to protect against IA-32 accesses to them.
+ */
+ vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
+ if (vma) {
+ memset(vma, 0, sizeof(*vma));
+ vma->vm_mm = current->mm;
+ vma->vm_start = IA32_GDT_OFFSET;
+ vma->vm_end = vma->vm_start + PAGE_SIZE;
+ vma->vm_page_prot = PAGE_SHARED;
+ vma->vm_flags = VM_READ|VM_MAYREAD|VM_RESERVED;
+ vma->vm_ops = &ia32_shared_page_vm_ops;
+ down_write(&current->mm->mmap_sem);
+ {
+ if (insert_vm_struct(current->mm, vma)) {
+ kmem_cache_free(vm_area_cachep, vma);
+ up_write(&current->mm->mmap_sem);
+ BUG();
+ }
+ }
+ up_write(&current->mm->mmap_sem);
+ }
+
+ /*
+ * When user stack is not executable, push sigreturn code to stack makes
+ * segmentation fault raised when returning to kernel. So now sigreturn
+ * code is locked in specific gate page, which is pointed by pretcode
+ * when setup_frame_ia32
+ */
+ vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
+ if (vma) {
+ memset(vma, 0, sizeof(*vma));
+ vma->vm_mm = current->mm;
+ vma->vm_start = IA32_GATE_OFFSET;
+ vma->vm_end = vma->vm_start + PAGE_SIZE;
+ vma->vm_page_prot = PAGE_COPY_EXEC;
+ vma->vm_flags = VM_READ | VM_MAYREAD | VM_EXEC
+ | VM_MAYEXEC | VM_RESERVED;
+ vma->vm_ops = &ia32_gate_page_vm_ops;
+ down_write(&current->mm->mmap_sem);
+ {
+ if (insert_vm_struct(current->mm, vma)) {
+ kmem_cache_free(vm_area_cachep, vma);
+ up_write(&current->mm->mmap_sem);
+ BUG();
+ }
+ }
+ up_write(&current->mm->mmap_sem);
+ }
+
+ /*
+ * Install LDT as anonymous memory. This gives us all-zero segment descriptors
+ * until a task modifies them via modify_ldt().
+ */
+ vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
+ if (vma) {
+ memset(vma, 0, sizeof(*vma));
+ vma->vm_mm = current->mm;
+ vma->vm_start = IA32_LDT_OFFSET;
+ vma->vm_end = vma->vm_start + PAGE_ALIGN(IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE);
+ vma->vm_page_prot = PAGE_SHARED;
+ vma->vm_flags = VM_READ|VM_WRITE|VM_MAYREAD|VM_MAYWRITE;
+ down_write(&current->mm->mmap_sem);
+ {
+ if (insert_vm_struct(current->mm, vma)) {
+ kmem_cache_free(vm_area_cachep, vma);
+ up_write(&current->mm->mmap_sem);
+ BUG();
+ }
+ }
+ up_write(&current->mm->mmap_sem);
+ }
+
+ ia64_psr(regs)->ac = 0; /* turn off alignment checking */
+ regs->loadrs = 0;
+ /*
+ * According to the ABI %edx points to an `atexit' handler. Since we don't have
+ * one we'll set it to 0 and initialize all the other registers just to make
+ * things more deterministic, ala the i386 implementation.
+ */
+ regs->r8 = 0; /* %eax */
+ regs->r11 = 0; /* %ebx */
+ regs->r9 = 0; /* %ecx */
+ regs->r10 = 0; /* %edx */
+ regs->r13 = 0; /* %ebp */
+ regs->r14 = 0; /* %esi */
+ regs->r15 = 0; /* %edi */
+
+ current->thread.eflag = IA32_EFLAG;
+ current->thread.fsr = IA32_FSR_DEFAULT;
+ current->thread.fcr = IA32_FCR_DEFAULT;
+ current->thread.fir = 0;
+ current->thread.fdr = 0;
+
+ /*
+ * Setup GDTD. Note: GDTD is the descrambled version of the pseudo-descriptor
+ * format defined by Figure 3-11 "Pseudo-Descriptor Format" in the IA-32
+ * architecture manual. Also note that the only fields that are not ignored are
+ * `base', `limit', 'G', `P' (must be 1) and `S' (must be 0).
+ */
+ regs->r31 = IA32_SEG_UNSCRAMBLE(IA32_SEG_DESCRIPTOR(IA32_GDT_OFFSET, IA32_PAGE_SIZE - 1,
+ 0, 0, 0, 1, 0, 0, 0));
+ /* Setup the segment selectors */
+ regs->r16 = (__USER_DS << 16) | __USER_DS; /* ES == DS, GS, FS are zero */
+ regs->r17 = (__USER_DS << 16) | __USER_CS; /* SS, CS; ia32_load_state() sets TSS and LDT */
+
+ ia32_load_segment_descriptors(current);
+ ia32_load_state(current);
+}
+
+int
+ia32_setup_arg_pages (struct linux_binprm *bprm, int executable_stack)
+{
+ unsigned long stack_base;
+ struct vm_area_struct *mpnt;
+ struct mm_struct *mm = current->mm;
+ int i, ret;
+
+ stack_base = IA32_STACK_TOP - MAX_ARG_PAGES*PAGE_SIZE;
+ mm->arg_start = bprm->p + stack_base;
+
+ bprm->p += stack_base;
+ if (bprm->loader)
+ bprm->loader += stack_base;
+ bprm->exec += stack_base;
+
+ mpnt = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
+ if (!mpnt)
+ return -ENOMEM;
+
+ if (security_vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p))
+ >> PAGE_SHIFT)) {
+ kmem_cache_free(vm_area_cachep, mpnt);
+ return -ENOMEM;
+ }
+
+ memset(mpnt, 0, sizeof(*mpnt));
+
+ down_write(&current->mm->mmap_sem);
+ {
+ mpnt->vm_mm = current->mm;
+ mpnt->vm_start = PAGE_MASK & (unsigned long) bprm->p;
+ mpnt->vm_end = IA32_STACK_TOP;
+ if (executable_stack == EXSTACK_ENABLE_X)
+ mpnt->vm_flags = VM_STACK_FLAGS | VM_EXEC;
+ else if (executable_stack == EXSTACK_DISABLE_X)
+ mpnt->vm_flags = VM_STACK_FLAGS & ~VM_EXEC;
+ else
+ mpnt->vm_flags = VM_STACK_FLAGS;
+ mpnt->vm_page_prot = (mpnt->vm_flags & VM_EXEC)?
+ PAGE_COPY_EXEC: PAGE_COPY;
+ if ((ret = insert_vm_struct(current->mm, mpnt))) {
+ up_write(&current->mm->mmap_sem);
+ kmem_cache_free(vm_area_cachep, mpnt);
+ return ret;
+ }
+ current->mm->stack_vm = current->mm->total_vm = vma_pages(mpnt);
+ }
+
+ for (i = 0 ; i < MAX_ARG_PAGES ; i++) {
+ struct page *page = bprm->page[i];
+ if (page) {
+ bprm->page[i] = NULL;
+ install_arg_page(mpnt, page, stack_base);
+ }
+ stack_base += PAGE_SIZE;
+ }
+ up_write(&current->mm->mmap_sem);
+
+ /* Can't do it in ia64_elf32_init(). Needs to be done before calls to
+ elf32_map() */
+ current->thread.ppl = ia32_init_pp_list();
+
+ return 0;
+}
+
+static void
+elf32_set_personality (void)
+{
+ set_personality(PER_LINUX32);
+ current->thread.map_base = IA32_PAGE_OFFSET/3;
+ current->thread.task_size = IA32_PAGE_OFFSET; /* use what Linux/x86 uses... */
+ set_fs(USER_DS); /* set addr limit for new TASK_SIZE */
+}
+
+static unsigned long
+elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type)
+{
+ unsigned long pgoff = (eppnt->p_vaddr) & ~IA32_PAGE_MASK;
+
+ return ia32_do_mmap(filep, (addr & IA32_PAGE_MASK), eppnt->p_filesz + pgoff, prot, type,
+ eppnt->p_offset - pgoff);
+}
+
+#define cpu_uses_ia32el() (local_cpu_data->family > 0x1f)
+
+static int __init check_elf32_binfmt(void)
+{
+ if (cpu_uses_ia32el()) {
+ printk("Please use IA-32 EL for executing IA-32 binaries\n");
+ return unregister_binfmt(&elf_format);
+ }
+ return 0;
+}
+
+module_init(check_elf32_binfmt)
diff --git a/arch/ia64/ia32/elfcore32.h b/arch/ia64/ia32/elfcore32.h
new file mode 100644
index 000000000000..b73b8b6b10c1
--- /dev/null
+++ b/arch/ia64/ia32/elfcore32.h
@@ -0,0 +1,138 @@
+/*
+ * IA-32 ELF core dump support.
+ *
+ * Copyright (C) 2003 Arun Sharma <arun.sharma@intel.com>
+ *
+ * Derived from the x86_64 version
+ */
+#ifndef _ELFCORE32_H_
+#define _ELFCORE32_H_
+
+#include <asm/intrinsics.h>
+#include <asm/uaccess.h>
+
+#define USE_ELF_CORE_DUMP 1
+
+/* Override elfcore.h */
+#define _LINUX_ELFCORE_H 1
+typedef unsigned int elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct32) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct ia32_user_i387_struct elf_fpregset_t;
+typedef struct ia32_user_fxsr_struct elf_fpxregset_t;
+
+struct elf_siginfo
+{
+ int si_signo; /* signal number */
+ int si_code; /* extra code */
+ int si_errno; /* errno */
+};
+
+#define jiffies_to_timeval(a,b) do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; }while(0)
+
+struct elf_prstatus
+{
+ struct elf_siginfo pr_info; /* Info associated with signal */
+ short pr_cursig; /* Current signal */
+ unsigned int pr_sigpend; /* Set of pending signals */
+ unsigned int pr_sighold; /* Set of held signals */
+ pid_t pr_pid;
+ pid_t pr_ppid;
+ pid_t pr_pgrp;
+ pid_t pr_sid;
+ struct compat_timeval pr_utime; /* User time */
+ struct compat_timeval pr_stime; /* System time */
+ struct compat_timeval pr_cutime; /* Cumulative user time */
+ struct compat_timeval pr_cstime; /* Cumulative system time */
+ elf_gregset_t pr_reg; /* GP registers */
+ int pr_fpvalid; /* True if math co-processor being used. */
+};
+
+#define ELF_PRARGSZ (80) /* Number of chars for args */
+
+struct elf_prpsinfo
+{
+ char pr_state; /* numeric process state */
+ char pr_sname; /* char for pr_state */
+ char pr_zomb; /* zombie */
+ char pr_nice; /* nice val */
+ unsigned int pr_flag; /* flags */
+ __u16 pr_uid;
+ __u16 pr_gid;
+ pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid;
+ /* Lots missing */
+ char pr_fname[16]; /* filename of executable */
+ char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
+};
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ pr_reg[0] = regs->r11; \
+ pr_reg[1] = regs->r9; \
+ pr_reg[2] = regs->r10; \
+ pr_reg[3] = regs->r14; \
+ pr_reg[4] = regs->r15; \
+ pr_reg[5] = regs->r13; \
+ pr_reg[6] = regs->r8; \
+ pr_reg[7] = regs->r16 & 0xffff; \
+ pr_reg[8] = (regs->r16 >> 16) & 0xffff; \
+ pr_reg[9] = (regs->r16 >> 32) & 0xffff; \
+ pr_reg[10] = (regs->r16 >> 48) & 0xffff; \
+ pr_reg[11] = regs->r1; \
+ pr_reg[12] = regs->cr_iip; \
+ pr_reg[13] = regs->r17 & 0xffff; \
+ pr_reg[14] = ia64_getreg(_IA64_REG_AR_EFLAG); \
+ pr_reg[15] = regs->r12; \
+ pr_reg[16] = (regs->r17 >> 16) & 0xffff;
+
+static inline void elf_core_copy_regs(elf_gregset_t *elfregs,
+ struct pt_regs *regs)
+{
+ ELF_CORE_COPY_REGS((*elfregs), regs)
+}
+
+static inline int elf_core_copy_task_regs(struct task_struct *t,
+ elf_gregset_t* elfregs)
+{
+ struct pt_regs *pp = ia64_task_regs(t);
+ ELF_CORE_COPY_REGS((*elfregs), pp);
+ return 1;
+}
+
+static inline int
+elf_core_copy_task_fpregs(struct task_struct *tsk, struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+ struct ia32_user_i387_struct *fpstate = (void*)fpu;
+ mm_segment_t old_fs;
+
+ if (!tsk_used_math(tsk))
+ return 0;
+
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
+ save_ia32_fpstate(tsk, (struct ia32_user_i387_struct __user *) fpstate);
+ set_fs(old_fs);
+
+ return 1;
+}
+
+#define ELF_CORE_COPY_XFPREGS 1
+static inline int
+elf_core_copy_task_xfpregs(struct task_struct *tsk, elf_fpxregset_t *xfpu)
+{
+ struct ia32_user_fxsr_struct *fpxstate = (void*) xfpu;
+ mm_segment_t old_fs;
+
+ if (!tsk_used_math(tsk))
+ return 0;
+
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
+ save_ia32_fpxstate(tsk, (struct ia32_user_fxsr_struct __user *) fpxstate);
+ set_fs(old_fs);
+
+ return 1;
+}
+
+#endif /* _ELFCORE32_H_ */
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
new file mode 100644
index 000000000000..829a6d80711c
--- /dev/null
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -0,0 +1,500 @@
+#include <asm/asmmacro.h>
+#include <asm/ia32.h>
+#include <asm/offsets.h>
+#include <asm/signal.h>
+#include <asm/thread_info.h>
+
+#include "../kernel/minstate.h"
+
+ /*
+ * execve() is special because in case of success, we need to
+ * setup a null register window frame (in case an IA-32 process
+ * is exec'ing an IA-64 program).
+ */
+ENTRY(ia32_execve)
+ .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(3)
+ alloc loc1=ar.pfs,3,2,4,0
+ mov loc0=rp
+ .body
+ zxt4 out0=in0 // filename
+ ;; // stop bit between alloc and call
+ zxt4 out1=in1 // argv
+ zxt4 out2=in2 // envp
+ add out3=16,sp // regs
+ br.call.sptk.few rp=sys32_execve
+1: cmp.ge p6,p0=r8,r0
+ mov ar.pfs=loc1 // restore ar.pfs
+ ;;
+(p6) mov ar.pfs=r0 // clear ar.pfs in case of success
+ sxt4 r8=r8 // return 64-bit result
+ mov rp=loc0
+ br.ret.sptk.few rp
+END(ia32_execve)
+
+ENTRY(ia32_clone)
+ .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(5)
+ alloc r16=ar.pfs,5,2,6,0
+ DO_SAVE_SWITCH_STACK
+ mov loc0=rp
+ mov loc1=r16 // save ar.pfs across do_fork
+ .body
+ zxt4 out1=in1 // newsp
+ mov out3=16 // stacksize (compensates for 16-byte scratch area)
+ adds out2=IA64_SWITCH_STACK_SIZE+16,sp // out2 = &regs
+ mov out0=in0 // out0 = clone_flags
+ zxt4 out4=in2 // out4 = parent_tidptr
+ zxt4 out5=in4 // out5 = child_tidptr
+ br.call.sptk.many rp=do_fork
+.ret0: .restore sp
+ adds sp=IA64_SWITCH_STACK_SIZE,sp // pop the switch stack
+ mov ar.pfs=loc1
+ mov rp=loc0
+ br.ret.sptk.many rp
+END(ia32_clone)
+
+ENTRY(sys32_rt_sigsuspend)
+ .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
+ alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs
+ mov loc0=rp
+ mov out0=in0 // mask
+ mov out1=in1 // sigsetsize
+ mov out2=sp // out2 = &sigscratch
+ .fframe 16
+ adds sp=-16,sp // allocate dummy "sigscratch"
+ ;;
+ .body
+ br.call.sptk.many rp=ia32_rt_sigsuspend
+1: .restore sp
+ adds sp=16,sp
+ mov rp=loc0
+ mov ar.pfs=loc1
+ br.ret.sptk.many rp
+END(sys32_rt_sigsuspend)
+
+ENTRY(sys32_sigsuspend)
+ .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
+ alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs
+ mov loc0=rp
+ mov out0=in2 // mask (first two args are ignored)
+ ;;
+ mov out1=sp // out1 = &sigscratch
+ .fframe 16
+ adds sp=-16,sp // allocate dummy "sigscratch"
+ .body
+ br.call.sptk.many rp=ia32_sigsuspend
+1: .restore sp
+ adds sp=16,sp
+ mov rp=loc0
+ mov ar.pfs=loc1
+ br.ret.sptk.many rp
+END(sys32_sigsuspend)
+
+GLOBAL_ENTRY(ia32_ret_from_clone)
+ PT_REGS_UNWIND_INFO(0)
+{ /*
+ * Some versions of gas generate bad unwind info if the first instruction of a
+ * procedure doesn't go into the first slot of a bundle. This is a workaround.
+ */
+ nop.m 0
+ nop.i 0
+ /*
+ * We need to call schedule_tail() to complete the scheduling process.
+ * Called by ia64_switch_to after do_fork()->copy_thread(). r8 contains the
+ * address of the previously executing task.
+ */
+ br.call.sptk.many rp=ia64_invoke_schedule_tail
+}
+.ret1:
+ adds r2=TI_FLAGS+IA64_TASK_SIZE,r13
+ ;;
+ ld4 r2=[r2]
+ ;;
+ mov r8=0
+ and r2=_TIF_SYSCALL_TRACEAUDIT,r2
+ ;;
+ cmp.ne p6,p0=r2,r0
+(p6) br.cond.spnt .ia32_strace_check_retval
+ ;; // prevent RAW on r8
+END(ia32_ret_from_clone)
+ // fall thrugh
+GLOBAL_ENTRY(ia32_ret_from_syscall)
+ PT_REGS_UNWIND_INFO(0)
+
+ cmp.ge p6,p7=r8,r0 // syscall executed successfully?
+ adds r2=IA64_PT_REGS_R8_OFFSET+16,sp // r2 = &pt_regs.r8
+ ;;
+ alloc r3=ar.pfs,0,0,0,0 // drop the syscall argument frame
+ st8 [r2]=r8 // store return value in slot for r8
+ br.cond.sptk.many ia64_leave_kernel
+END(ia32_ret_from_syscall)
+
+ //
+ // Invoke a system call, but do some tracing before and after the call.
+ // We MUST preserve the current register frame throughout this routine
+ // because some system calls (such as ia64_execve) directly
+ // manipulate ar.pfs.
+ //
+ // Input:
+ // r8 = syscall number
+ // b6 = syscall entry point
+ //
+GLOBAL_ENTRY(ia32_trace_syscall)
+ PT_REGS_UNWIND_INFO(0)
+ mov r3=-38
+ adds r2=IA64_PT_REGS_R8_OFFSET+16,sp
+ ;;
+ st8 [r2]=r3 // initialize return code to -ENOSYS
+ br.call.sptk.few rp=syscall_trace_enter // give parent a chance to catch syscall args
+.ret2: // Need to reload arguments (they may be changed by the tracing process)
+ adds r2=IA64_PT_REGS_R1_OFFSET+16,sp // r2 = &pt_regs.r1
+ adds r3=IA64_PT_REGS_R13_OFFSET+16,sp // r3 = &pt_regs.r13
+ mov r15=IA32_NR_syscalls
+ ;;
+ ld4 r8=[r2],IA64_PT_REGS_R9_OFFSET-IA64_PT_REGS_R1_OFFSET
+ movl r16=ia32_syscall_table
+ ;;
+ ld4 r33=[r2],8 // r9 == ecx
+ ld4 r37=[r3],16 // r13 == ebp
+ cmp.ltu.unc p6,p7=r8,r15
+ ;;
+ ld4 r34=[r2],8 // r10 == edx
+ ld4 r36=[r3],8 // r15 == edi
+(p6) shladd r16=r8,3,r16 // force ni_syscall if not valid syscall number
+ ;;
+ ld8 r16=[r16]
+ ;;
+ ld4 r32=[r2],8 // r11 == ebx
+ mov b6=r16
+ ld4 r35=[r3],8 // r14 == esi
+ br.call.sptk.few rp=b6 // do the syscall
+.ia32_strace_check_retval:
+ cmp.lt p6,p0=r8,r0 // syscall failed?
+ adds r2=IA64_PT_REGS_R8_OFFSET+16,sp // r2 = &pt_regs.r8
+ ;;
+ st8.spill [r2]=r8 // store return value in slot for r8
+ br.call.sptk.few rp=syscall_trace_leave // give parent a chance to catch return value
+.ret4: alloc r2=ar.pfs,0,0,0,0 // drop the syscall argument frame
+ br.cond.sptk.many ia64_leave_kernel
+END(ia32_trace_syscall)
+
+GLOBAL_ENTRY(sys32_vfork)
+ alloc r16=ar.pfs,2,2,4,0;;
+ mov out0=IA64_CLONE_VFORK|IA64_CLONE_VM|SIGCHLD // out0 = clone_flags
+ br.cond.sptk.few .fork1 // do the work
+END(sys32_vfork)
+
+GLOBAL_ENTRY(sys32_fork)
+ .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2)
+ alloc r16=ar.pfs,2,2,4,0
+ mov out0=SIGCHLD // out0 = clone_flags
+ ;;
+.fork1:
+ mov loc0=rp
+ mov loc1=r16 // save ar.pfs across do_fork
+ DO_SAVE_SWITCH_STACK
+
+ .body
+
+ mov out1=0
+ mov out3=0
+ adds out2=IA64_SWITCH_STACK_SIZE+16,sp // out2 = &regs
+ br.call.sptk.few rp=do_fork
+.ret5: .restore sp
+ adds sp=IA64_SWITCH_STACK_SIZE,sp // pop the switch stack
+ mov ar.pfs=loc1
+ mov rp=loc0
+ br.ret.sptk.many rp
+END(sys32_fork)
+
+ .rodata
+ .align 8
+ .globl ia32_syscall_table
+ia32_syscall_table:
+ data8 sys_ni_syscall /* 0 - old "setup(" system call*/
+ data8 sys_exit
+ data8 sys32_fork
+ data8 sys_read
+ data8 sys_write
+ data8 sys32_open /* 5 */
+ data8 sys_close
+ data8 sys32_waitpid
+ data8 sys_creat
+ data8 sys_link
+ data8 sys_unlink /* 10 */
+ data8 ia32_execve
+ data8 sys_chdir
+ data8 compat_sys_time
+ data8 sys_mknod
+ data8 sys_chmod /* 15 */
+ data8 sys_lchown /* 16-bit version */
+ data8 sys_ni_syscall /* old break syscall holder */
+ data8 sys_ni_syscall
+ data8 sys32_lseek
+ data8 sys_getpid /* 20 */
+ data8 compat_sys_mount
+ data8 sys_oldumount
+ data8 sys_setuid /* 16-bit version */
+ data8 sys_getuid /* 16-bit version */
+ data8 compat_sys_stime /* 25 */
+ data8 sys32_ptrace
+ data8 sys32_alarm
+ data8 sys_ni_syscall
+ data8 sys32_pause
+ data8 compat_sys_utime /* 30 */
+ data8 sys_ni_syscall /* old stty syscall holder */
+ data8 sys_ni_syscall /* old gtty syscall holder */
+ data8 sys_access
+ data8 sys_nice
+ data8 sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ data8 sys_sync
+ data8 sys_kill
+ data8 sys_rename
+ data8 sys_mkdir
+ data8 sys_rmdir /* 40 */
+ data8 sys_dup
+ data8 sys32_pipe
+ data8 compat_sys_times
+ data8 sys_ni_syscall /* old prof syscall holder */
+ data8 sys32_brk /* 45 */
+ data8 sys_setgid /* 16-bit version */
+ data8 sys_getgid /* 16-bit version */
+ data8 sys32_signal
+ data8 sys_geteuid /* 16-bit version */
+ data8 sys_getegid /* 16-bit version */ /* 50 */
+ data8 sys_acct
+ data8 sys_umount /* recycled never used phys( */
+ data8 sys_ni_syscall /* old lock syscall holder */
+ data8 compat_sys_ioctl
+ data8 compat_sys_fcntl /* 55 */
+ data8 sys_ni_syscall /* old mpx syscall holder */
+ data8 sys_setpgid
+ data8 sys_ni_syscall /* old ulimit syscall holder */
+ data8 sys_ni_syscall
+ data8 sys_umask /* 60 */
+ data8 sys_chroot
+ data8 sys_ustat
+ data8 sys_dup2
+ data8 sys_getppid
+ data8 sys_getpgrp /* 65 */
+ data8 sys_setsid
+ data8 sys32_sigaction
+ data8 sys_ni_syscall
+ data8 sys_ni_syscall
+ data8 sys_setreuid /* 16-bit version */ /* 70 */
+ data8 sys_setregid /* 16-bit version */
+ data8 sys32_sigsuspend
+ data8 compat_sys_sigpending
+ data8 sys_sethostname
+ data8 compat_sys_setrlimit /* 75 */
+ data8 compat_sys_old_getrlimit
+ data8 compat_sys_getrusage
+ data8 sys32_gettimeofday
+ data8 sys32_settimeofday
+ data8 sys32_getgroups16 /* 80 */
+ data8 sys32_setgroups16
+ data8 sys32_old_select
+ data8 sys_symlink
+ data8 sys_ni_syscall
+ data8 sys_readlink /* 85 */
+ data8 sys_uselib
+ data8 sys_swapon
+ data8 sys_reboot
+ data8 sys32_readdir
+ data8 sys32_mmap /* 90 */
+ data8 sys32_munmap
+ data8 sys_truncate
+ data8 sys_ftruncate
+ data8 sys_fchmod
+ data8 sys_fchown /* 16-bit version */ /* 95 */
+ data8 sys_getpriority
+ data8 sys_setpriority
+ data8 sys_ni_syscall /* old profil syscall holder */
+ data8 compat_sys_statfs
+ data8 compat_sys_fstatfs /* 100 */
+ data8 sys_ni_syscall /* ioperm */
+ data8 compat_sys_socketcall
+ data8 sys_syslog
+ data8 compat_sys_setitimer
+ data8 compat_sys_getitimer /* 105 */
+ data8 compat_sys_newstat
+ data8 compat_sys_newlstat
+ data8 compat_sys_newfstat
+ data8 sys_ni_syscall
+ data8 sys_ni_syscall /* iopl */ /* 110 */
+ data8 sys_vhangup
+ data8 sys_ni_syscall /* used to be sys_idle */
+ data8 sys_ni_syscall
+ data8 compat_sys_wait4
+ data8 sys_swapoff /* 115 */
+ data8 sys32_sysinfo
+ data8 sys32_ipc
+ data8 sys_fsync
+ data8 sys32_sigreturn
+ data8 ia32_clone /* 120 */
+ data8 sys_setdomainname
+ data8 sys32_newuname
+ data8 sys32_modify_ldt
+ data8 sys_ni_syscall /* adjtimex */
+ data8 sys32_mprotect /* 125 */
+ data8 compat_sys_sigprocmask
+ data8 sys_ni_syscall /* create_module */
+ data8 sys_ni_syscall /* init_module */
+ data8 sys_ni_syscall /* delete_module */
+ data8 sys_ni_syscall /* get_kernel_syms */ /* 130 */
+ data8 sys_quotactl
+ data8 sys_getpgid
+ data8 sys_fchdir
+ data8 sys_ni_syscall /* sys_bdflush */
+ data8 sys_sysfs /* 135 */
+ data8 sys32_personality
+ data8 sys_ni_syscall /* for afs_syscall */
+ data8 sys_setfsuid /* 16-bit version */
+ data8 sys_setfsgid /* 16-bit version */
+ data8 sys_llseek /* 140 */
+ data8 compat_sys_getdents
+ data8 compat_sys_select
+ data8 sys_flock
+ data8 sys32_msync
+ data8 compat_sys_readv /* 145 */
+ data8 compat_sys_writev
+ data8 sys_getsid
+ data8 sys_fdatasync
+ data8 sys32_sysctl
+ data8 sys_mlock /* 150 */
+ data8 sys_munlock
+ data8 sys_mlockall
+ data8 sys_munlockall
+ data8 sys_sched_setparam
+ data8 sys_sched_getparam /* 155 */
+ data8 sys_sched_setscheduler
+ data8 sys_sched_getscheduler
+ data8 sys_sched_yield
+ data8 sys_sched_get_priority_max
+ data8 sys_sched_get_priority_min /* 160 */
+ data8 sys32_sched_rr_get_interval
+ data8 compat_sys_nanosleep
+ data8 sys32_mremap
+ data8 sys_setresuid /* 16-bit version */
+ data8 sys32_getresuid16 /* 16-bit version */ /* 165 */
+ data8 sys_ni_syscall /* vm86 */
+ data8 sys_ni_syscall /* sys_query_module */
+ data8 sys_poll
+ data8 sys_ni_syscall /* nfsservctl */
+ data8 sys_setresgid /* 170 */
+ data8 sys32_getresgid16
+ data8 sys_prctl
+ data8 sys32_rt_sigreturn
+ data8 sys32_rt_sigaction
+ data8 sys32_rt_sigprocmask /* 175 */
+ data8 sys_rt_sigpending
+ data8 compat_sys_rt_sigtimedwait
+ data8 sys32_rt_sigqueueinfo
+ data8 sys32_rt_sigsuspend
+ data8 sys32_pread /* 180 */
+ data8 sys32_pwrite
+ data8 sys_chown /* 16-bit version */
+ data8 sys_getcwd
+ data8 sys_capget
+ data8 sys_capset /* 185 */
+ data8 sys32_sigaltstack
+ data8 sys32_sendfile
+ data8 sys_ni_syscall /* streams1 */
+ data8 sys_ni_syscall /* streams2 */
+ data8 sys32_vfork /* 190 */
+ data8 compat_sys_getrlimit
+ data8 sys32_mmap2
+ data8 sys32_truncate64
+ data8 sys32_ftruncate64
+ data8 sys32_stat64 /* 195 */
+ data8 sys32_lstat64
+ data8 sys32_fstat64
+ data8 sys_lchown
+ data8 sys_getuid
+ data8 sys_getgid /* 200 */
+ data8 sys_geteuid
+ data8 sys_getegid
+ data8 sys_setreuid
+ data8 sys_setregid
+ data8 sys_getgroups /* 205 */
+ data8 sys_setgroups
+ data8 sys_fchown
+ data8 sys_setresuid
+ data8 sys_getresuid
+ data8 sys_setresgid /* 210 */
+ data8 sys_getresgid
+ data8 sys_chown
+ data8 sys_setuid
+ data8 sys_setgid
+ data8 sys_setfsuid /* 215 */
+ data8 sys_setfsgid
+ data8 sys_pivot_root
+ data8 sys_mincore
+ data8 sys_madvise
+ data8 compat_sys_getdents64 /* 220 */
+ data8 compat_sys_fcntl64
+ data8 sys_ni_syscall /* reserved for TUX */
+ data8 sys_ni_syscall /* reserved for Security */
+ data8 sys_gettid
+ data8 sys_readahead /* 225 */
+ data8 sys_setxattr
+ data8 sys_lsetxattr
+ data8 sys_fsetxattr
+ data8 sys_getxattr
+ data8 sys_lgetxattr /* 230 */
+ data8 sys_fgetxattr
+ data8 sys_listxattr
+ data8 sys_llistxattr
+ data8 sys_flistxattr
+ data8 sys_removexattr /* 235 */
+ data8 sys_lremovexattr
+ data8 sys_fremovexattr
+ data8 sys_tkill
+ data8 sys_sendfile64
+ data8 compat_sys_futex /* 240 */
+ data8 compat_sys_sched_setaffinity
+ data8 compat_sys_sched_getaffinity
+ data8 sys32_set_thread_area
+ data8 sys32_get_thread_area
+ data8 compat_sys_io_setup /* 245 */
+ data8 sys_io_destroy
+ data8 compat_sys_io_getevents
+ data8 compat_sys_io_submit
+ data8 sys_io_cancel
+ data8 sys_fadvise64 /* 250 */
+ data8 sys_ni_syscall
+ data8 sys_exit_group
+ data8 sys_lookup_dcookie
+ data8 sys_epoll_create
+ data8 sys32_epoll_ctl /* 255 */
+ data8 sys32_epoll_wait
+ data8 sys_remap_file_pages
+ data8 sys_set_tid_address
+ data8 sys32_timer_create
+ data8 compat_sys_timer_settime /* 260 */
+ data8 compat_sys_timer_gettime
+ data8 sys_timer_getoverrun
+ data8 sys_timer_delete
+ data8 compat_sys_clock_settime
+ data8 compat_sys_clock_gettime /* 265 */
+ data8 compat_sys_clock_getres
+ data8 compat_sys_clock_nanosleep
+ data8 compat_sys_statfs64
+ data8 compat_sys_fstatfs64
+ data8 sys_tgkill /* 270 */
+ data8 compat_sys_utimes
+ data8 sys32_fadvise64_64
+ data8 sys_ni_syscall
+ data8 sys_ni_syscall
+ data8 sys_ni_syscall /* 275 */
+ data8 sys_ni_syscall
+ data8 compat_sys_mq_open
+ data8 sys_mq_unlink
+ data8 compat_sys_mq_timedsend
+ data8 compat_sys_mq_timedreceive /* 280 */
+ data8 compat_sys_mq_notify
+ data8 compat_sys_mq_getsetattr
+ data8 sys_ni_syscall /* reserved for kexec */
+ data8 compat_sys_waitid
+
+ // guard against failures to increase IA32_NR_syscalls
+ .org ia32_syscall_table + 8*IA32_NR_syscalls
diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c
new file mode 100644
index 000000000000..9845dabe2613
--- /dev/null
+++ b/arch/ia64/ia32/ia32_ioctl.c
@@ -0,0 +1,48 @@
+/*
+ * IA32 Architecture-specific ioctl shim code
+ *
+ * Copyright (C) 2000 VA Linux Co
+ * Copyright (C) 2000 Don Dugger <n0ano@valinux.com>
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/signal.h> /* argh, msdos_fs.h isn't self-contained... */
+#include <linux/syscalls.h>
+#include "ia32priv.h"
+
+#define INCLUDES
+#include "compat_ioctl.c"
+#include <asm/ioctl32.h>
+
+#define IOCTL_NR(a) ((a) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
+
+#define DO_IOCTL(fd, cmd, arg) ({ \
+ int _ret; \
+ mm_segment_t _old_fs = get_fs(); \
+ \
+ set_fs(KERNEL_DS); \
+ _ret = sys_ioctl(fd, cmd, (unsigned long)arg); \
+ set_fs(_old_fs); \
+ _ret; \
+})
+
+#define CODE
+#include "compat_ioctl.c"
+
+typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *);
+
+#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl)
+#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL },
+#define IOCTL_TABLE_START \
+ struct ioctl_trans ioctl_start[] = {
+#define IOCTL_TABLE_END \
+ };
+
+IOCTL_TABLE_START
+#define DECLARES
+#include "compat_ioctl.c"
+#include <linux/compat_ioctl.h>
+IOCTL_TABLE_END
+
+int ioctl_table_size = ARRAY_SIZE(ioctl_start);
diff --git a/arch/ia64/ia32/ia32_ldt.c b/arch/ia64/ia32/ia32_ldt.c
new file mode 100644
index 000000000000..a152738c7d0d
--- /dev/null
+++ b/arch/ia64/ia32/ia32_ldt.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2001, 2004 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * Adapted from arch/i386/kernel/ldt.c
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/vmalloc.h>
+
+#include <asm/uaccess.h>
+
+#include "ia32priv.h"
+
+/*
+ * read_ldt() is not really atomic - this is not a problem since synchronization of reads
+ * and writes done to the LDT has to be assured by user-space anyway. Writes are atomic,
+ * to protect the security checks done on new descriptors.
+ */
+static int
+read_ldt (void __user *ptr, unsigned long bytecount)
+{
+ unsigned long bytes_left, n;
+ char __user *src, *dst;
+ char buf[256]; /* temporary buffer (don't overflow kernel stack!) */
+
+ if (bytecount > IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE)
+ bytecount = IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE;
+
+ bytes_left = bytecount;
+
+ src = (void __user *) IA32_LDT_OFFSET;
+ dst = ptr;
+
+ while (bytes_left) {
+ n = sizeof(buf);
+ if (n > bytes_left)
+ n = bytes_left;
+
+ /*
+ * We know we're reading valid memory, but we still must guard against
+ * running out of memory.
+ */
+ if (__copy_from_user(buf, src, n))
+ return -EFAULT;
+
+ if (copy_to_user(dst, buf, n))
+ return -EFAULT;
+
+ src += n;
+ dst += n;
+ bytes_left -= n;
+ }
+ return bytecount;
+}
+
+static int
+read_default_ldt (void __user * ptr, unsigned long bytecount)
+{
+ unsigned long size;
+ int err;
+
+ /* XXX fix me: should return equivalent of default_ldt[0] */
+ err = 0;
+ size = 8;
+ if (size > bytecount)
+ size = bytecount;
+
+ err = size;
+ if (clear_user(ptr, size))
+ err = -EFAULT;
+
+ return err;
+}
+
+static int
+write_ldt (void __user * ptr, unsigned long bytecount, int oldmode)
+{
+ struct ia32_user_desc ldt_info;
+ __u64 entry;
+ int ret;
+
+ if (bytecount != sizeof(ldt_info))
+ return -EINVAL;
+ if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
+ return -EFAULT;
+
+ if (ldt_info.entry_number >= IA32_LDT_ENTRIES)
+ return -EINVAL;
+ if (ldt_info.contents == 3) {
+ if (oldmode)
+ return -EINVAL;
+ if (ldt_info.seg_not_present == 0)
+ return -EINVAL;
+ }
+
+ if (ldt_info.base_addr == 0 && ldt_info.limit == 0
+ && (oldmode || (ldt_info.contents == 0 && ldt_info.read_exec_only == 1
+ && ldt_info.seg_32bit == 0 && ldt_info.limit_in_pages == 0
+ && ldt_info.seg_not_present == 1 && ldt_info.useable == 0)))
+ /* allow LDTs to be cleared by the user */
+ entry = 0;
+ else
+ /* we must set the "Accessed" bit as IVE doesn't emulate it */
+ entry = IA32_SEG_DESCRIPTOR(ldt_info.base_addr, ldt_info.limit,
+ (((ldt_info.read_exec_only ^ 1) << 1)
+ | (ldt_info.contents << 2)) | 1,
+ 1, 3, ldt_info.seg_not_present ^ 1,
+ (oldmode ? 0 : ldt_info.useable),
+ ldt_info.seg_32bit,
+ ldt_info.limit_in_pages);
+ /*
+ * Install the new entry. We know we're accessing valid (mapped) user-level
+ * memory, but we still need to guard against out-of-memory, hence we must use
+ * put_user().
+ */
+ ret = __put_user(entry, (__u64 __user *) IA32_LDT_OFFSET + ldt_info.entry_number);
+ ia32_load_segment_descriptors(current);
+ return ret;
+}
+
+asmlinkage int
+sys32_modify_ldt (int func, unsigned int ptr, unsigned int bytecount)
+{
+ int ret = -ENOSYS;
+
+ switch (func) {
+ case 0:
+ ret = read_ldt(compat_ptr(ptr), bytecount);
+ break;
+ case 1:
+ ret = write_ldt(compat_ptr(ptr), bytecount, 1);
+ break;
+ case 2:
+ ret = read_default_ldt(compat_ptr(ptr), bytecount);
+ break;
+ case 0x11:
+ ret = write_ldt(compat_ptr(ptr), bytecount, 0);
+ break;
+ }
+ return ret;
+}
diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c
new file mode 100644
index 000000000000..19b02adce68c
--- /dev/null
+++ b/arch/ia64/ia32/ia32_signal.c
@@ -0,0 +1,1036 @@
+/*
+ * IA32 Architecture-specific signal handling support.
+ *
+ * Copyright (C) 1999, 2001-2002, 2005 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
+ * Copyright (C) 2000 VA Linux Co
+ * Copyright (C) 2000 Don Dugger <n0ano@valinux.com>
+ *
+ * Derived from i386 and Alpha versions.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/personality.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/syscalls.h>
+#include <linux/unistd.h>
+#include <linux/wait.h>
+#include <linux/compat.h>
+
+#include <asm/intrinsics.h>
+#include <asm/uaccess.h>
+#include <asm/rse.h>
+#include <asm/sigcontext.h>
+#include <asm/segment.h>
+
+#include "ia32priv.h"
+
+#include "../kernel/sigframe.h"
+
+#define A(__x) ((unsigned long)(__x))
+
+#define DEBUG_SIG 0
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+#define __IA32_NR_sigreturn 119
+#define __IA32_NR_rt_sigreturn 173
+
+struct sigframe_ia32
+{
+ int pretcode;
+ int sig;
+ struct sigcontext_ia32 sc;
+ struct _fpstate_ia32 fpstate;
+ unsigned int extramask[_COMPAT_NSIG_WORDS-1];
+ char retcode[8];
+};
+
+struct rt_sigframe_ia32
+{
+ int pretcode;
+ int sig;
+ int pinfo;
+ int puc;
+ compat_siginfo_t info;
+ struct ucontext_ia32 uc;
+ struct _fpstate_ia32 fpstate;
+ char retcode[8];
+};
+
+int
+copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
+{
+ unsigned long tmp;
+ int err;
+
+ if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
+ return -EFAULT;
+
+ err = __get_user(to->si_signo, &from->si_signo);
+ err |= __get_user(to->si_errno, &from->si_errno);
+ err |= __get_user(to->si_code, &from->si_code);
+
+ if (to->si_code < 0)
+ err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
+ else {
+ switch (to->si_code >> 16) {
+ case __SI_CHLD >> 16:
+ err |= __get_user(to->si_utime, &from->si_utime);
+ err |= __get_user(to->si_stime, &from->si_stime);
+ err |= __get_user(to->si_status, &from->si_status);
+ default:
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ break;
+ case __SI_FAULT >> 16:
+ err |= __get_user(tmp, &from->si_addr);
+ to->si_addr = (void __user *) tmp;
+ break;
+ case __SI_POLL >> 16:
+ err |= __get_user(to->si_band, &from->si_band);
+ err |= __get_user(to->si_fd, &from->si_fd);
+ break;
+ case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
+ case __SI_MESGQ >> 16:
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ err |= __get_user(to->si_int, &from->si_int);
+ break;
+ }
+ }
+ return err;
+}
+
+int
+copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from)
+{
+ unsigned int addr;
+ int err;
+
+ if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
+ return -EFAULT;
+
+ /* If you change siginfo_t structure, please be sure
+ this code is fixed accordingly.
+ It should never copy any pad contained in the structure
+ to avoid security leaks, but must copy the generic
+ 3 ints plus the relevant union member.
+ This routine must convert siginfo from 64bit to 32bit as well
+ at the same time. */
+ err = __put_user(from->si_signo, &to->si_signo);
+ err |= __put_user(from->si_errno, &to->si_errno);
+ err |= __put_user((short)from->si_code, &to->si_code);
+ if (from->si_code < 0)
+ err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
+ else {
+ switch (from->si_code >> 16) {
+ case __SI_CHLD >> 16:
+ err |= __put_user(from->si_utime, &to->si_utime);
+ err |= __put_user(from->si_stime, &to->si_stime);
+ err |= __put_user(from->si_status, &to->si_status);
+ default:
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ case __SI_FAULT >> 16:
+ /* avoid type-checking warnings by copying _pad[0] in lieu of si_addr... */
+ err |= __put_user(from->_sifields._pad[0], &to->si_addr);
+ break;
+ case __SI_POLL >> 16:
+ err |= __put_user(from->si_band, &to->si_band);
+ err |= __put_user(from->si_fd, &to->si_fd);
+ break;
+ case __SI_TIMER >> 16:
+ err |= __put_user(from->si_tid, &to->si_tid);
+ err |= __put_user(from->si_overrun, &to->si_overrun);
+ addr = (unsigned long) from->si_ptr;
+ err |= __put_user(addr, &to->si_ptr);
+ break;
+ case __SI_RT >> 16: /* Not generated by the kernel as of now. */
+ case __SI_MESGQ >> 16:
+ err |= __put_user(from->si_uid, &to->si_uid);
+ err |= __put_user(from->si_pid, &to->si_pid);
+ addr = (unsigned long) from->si_ptr;
+ err |= __put_user(addr, &to->si_ptr);
+ break;
+ }
+ }
+ return err;
+}
+
+
+/*
+ * SAVE and RESTORE of ia32 fpstate info, from ia64 current state
+ * Used in exception handler to pass the fpstate to the user, and restore
+ * the fpstate while returning from the exception handler.
+ *
+ * fpstate info and their mapping to IA64 regs:
+ * fpstate REG(BITS) Attribute Comments
+ * cw ar.fcr(0:12) with bits 7 and 6 not used
+ * sw ar.fsr(0:15)
+ * tag ar.fsr(16:31) with odd numbered bits not used
+ * (read returns 0, writes ignored)
+ * ipoff ar.fir(0:31)
+ * cssel ar.fir(32:47)
+ * dataoff ar.fdr(0:31)
+ * datasel ar.fdr(32:47)
+ *
+ * _st[(0+TOS)%8] f8
+ * _st[(1+TOS)%8] f9
+ * _st[(2+TOS)%8] f10
+ * _st[(3+TOS)%8] f11 (f8..f11 from ptregs)
+ * : : : (f12..f15 from live reg)
+ * : : :
+ * _st[(7+TOS)%8] f15 TOS=sw.top(bits11:13)
+ *
+ * status Same as sw RO
+ * magic 0 as X86_FXSR_MAGIC in ia32
+ * mxcsr Bits(7:15)=ar.fcr(39:47)
+ * Bits(0:5) =ar.fsr(32:37) with bit 6 reserved
+ * _xmm[0..7] f16..f31 (live registers)
+ * with _xmm[0]
+ * Bit(64:127)=f17(0:63)
+ * Bit(0:63)=f16(0:63)
+ * All other fields unused...
+ */
+
+static int
+save_ia32_fpstate_live (struct _fpstate_ia32 __user *save)
+{
+ struct task_struct *tsk = current;
+ struct pt_regs *ptp;
+ struct _fpreg_ia32 *fpregp;
+ char buf[32];
+ unsigned long fsr, fcr, fir, fdr;
+ unsigned long new_fsr;
+ unsigned long num128[2];
+ unsigned long mxcsr=0;
+ int fp_tos, fr8_st_map;
+
+ if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
+ return -EFAULT;
+
+ /* Read in fsr, fcr, fir, fdr and copy onto fpstate */
+ fsr = ia64_getreg(_IA64_REG_AR_FSR);
+ fcr = ia64_getreg(_IA64_REG_AR_FCR);
+ fir = ia64_getreg(_IA64_REG_AR_FIR);
+ fdr = ia64_getreg(_IA64_REG_AR_FDR);
+
+ /*
+ * We need to clear the exception state before calling the signal handler. Clear
+ * the bits 15, bits 0-7 in fp status word. Similar to the functionality of fnclex
+ * instruction.
+ */
+ new_fsr = fsr & ~0x80ff;
+ ia64_setreg(_IA64_REG_AR_FSR, new_fsr);
+
+ __put_user(fcr & 0xffff, &save->cw);
+ __put_user(fsr & 0xffff, &save->sw);
+ __put_user((fsr>>16) & 0xffff, &save->tag);
+ __put_user(fir, &save->ipoff);
+ __put_user((fir>>32) & 0xffff, &save->cssel);
+ __put_user(fdr, &save->dataoff);
+ __put_user((fdr>>32) & 0xffff, &save->datasel);
+ __put_user(fsr & 0xffff, &save->status);
+
+ mxcsr = ((fcr>>32) & 0xff80) | ((fsr>>32) & 0x3f);
+ __put_user(mxcsr & 0xffff, &save->mxcsr);
+ __put_user( 0, &save->magic); //#define X86_FXSR_MAGIC 0x0000
+
+ /*
+ * save f8..f11 from pt_regs
+ * save f12..f15 from live register set
+ */
+ /*
+ * Find the location where f8 has to go in fp reg stack. This depends on
+ * TOP(11:13) field of sw. Other f reg continue sequentially from where f8 maps
+ * to.
+ */
+ fp_tos = (fsr>>11)&0x7;
+ fr8_st_map = (8-fp_tos)&0x7;
+ ptp = ia64_task_regs(tsk);
+ fpregp = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
+ ia64f2ia32f(fpregp, &ptp->f8);
+ copy_to_user(&save->_st[(0+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+ ia64f2ia32f(fpregp, &ptp->f9);
+ copy_to_user(&save->_st[(1+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+ ia64f2ia32f(fpregp, &ptp->f10);
+ copy_to_user(&save->_st[(2+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+ ia64f2ia32f(fpregp, &ptp->f11);
+ copy_to_user(&save->_st[(3+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+
+ ia64_stfe(fpregp, 12);
+ copy_to_user(&save->_st[(4+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+ ia64_stfe(fpregp, 13);
+ copy_to_user(&save->_st[(5+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+ ia64_stfe(fpregp, 14);
+ copy_to_user(&save->_st[(6+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+ ia64_stfe(fpregp, 15);
+ copy_to_user(&save->_st[(7+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
+
+ ia64_stf8(&num128[0], 16);
+ ia64_stf8(&num128[1], 17);
+ copy_to_user(&save->_xmm[0], num128, sizeof(struct _xmmreg_ia32));
+
+ ia64_stf8(&num128[0], 18);
+ ia64_stf8(&num128[1], 19);
+ copy_to_user(&save->_xmm[1], num128, sizeof(struct _xmmreg_ia32));
+
+ ia64_stf8(&num128[0], 20);
+ ia64_stf8(&num128[1], 21);
+ copy_to_user(&save->_xmm[2], num128, sizeof(struct _xmmreg_ia32));
+
+ ia64_stf8(&num128[0], 22);
+ ia64_stf8(&num128[1], 23);
+ copy_to_user(&save->_xmm[3], num128, sizeof(struct _xmmreg_ia32));
+
+ ia64_stf8(&num128[0], 24);
+ ia64_stf8(&num128[1], 25);
+ copy_to_user(&save->_xmm[4], num128, sizeof(struct _xmmreg_ia32));
+
+ ia64_stf8(&num128[0], 26);
+ ia64_stf8(&num128[1], 27);
+ copy_to_user(&save->_xmm[5], num128, sizeof(struct _xmmreg_ia32));
+
+ ia64_stf8(&num128[0], 28);
+ ia64_stf8(&num128[1], 29);
+ copy_to_user(&save->_xmm[6], num128, sizeof(struct _xmmreg_ia32));
+
+ ia64_stf8(&num128[0], 30);
+ ia64_stf8(&num128[1], 31);
+ copy_to_user(&save->_xmm[7], num128, sizeof(struct _xmmreg_ia32));
+ return 0;
+}
+
+static int
+restore_ia32_fpstate_live (struct _fpstate_ia32 __user *save)
+{
+ struct task_struct *tsk = current;
+ struct pt_regs *ptp;
+ unsigned int lo, hi;
+ unsigned long num128[2];
+ unsigned long num64, mxcsr;
+ struct _fpreg_ia32 *fpregp;
+ char buf[32];
+ unsigned long fsr, fcr, fir, fdr;
+ int fp_tos, fr8_st_map;
+
+ if (!access_ok(VERIFY_READ, save, sizeof(*save)))
+ return(-EFAULT);
+
+ /*
+ * Updating fsr, fcr, fir, fdr.
+ * Just a bit more complicated than save.
+ * - Need to make sure that we don't write any value other than the
+ * specific fpstate info
+ * - Need to make sure that the untouched part of frs, fdr, fir, fcr
+ * should remain same while writing.
+ * So, we do a read, change specific fields and write.
+ */
+ fsr = ia64_getreg(_IA64_REG_AR_FSR);
+ fcr = ia64_getreg(_IA64_REG_AR_FCR);
+ fir = ia64_getreg(_IA64_REG_AR_FIR);
+ fdr = ia64_getreg(_IA64_REG_AR_FDR);
+
+ __get_user(mxcsr, (unsigned int __user *)&save->mxcsr);
+ /* setting bits 0..5 8..12 with cw and 39..47 from mxcsr */
+ __get_user(lo, (unsigned int __user *)&save->cw);
+ num64 = mxcsr & 0xff10;
+ num64 = (num64 << 32) | (lo & 0x1f3f);
+ fcr = (fcr & (~0xff1000001f3fUL)) | num64;
+
+ /* setting bits 0..31 with sw and tag and 32..37 from mxcsr */
+ __get_user(lo, (unsigned int __user *)&save->sw);
+ /* set bits 15,7 (fsw.b, fsw.es) to reflect the current error status */
+ if ( !(lo & 0x7f) )
+ lo &= (~0x8080);
+ __get_user(hi, (unsigned int __user *)&save->tag);
+ num64 = mxcsr & 0x3f;
+ num64 = (num64 << 16) | (hi & 0xffff);
+ num64 = (num64 << 16) | (lo & 0xffff);
+ fsr = (fsr & (~0x3fffffffffUL)) | num64;
+
+ /* setting bits 0..47 with cssel and ipoff */
+ __get_user(lo, (unsigned int __user *)&save->ipoff);
+ __get_user(hi, (unsigned int __user *)&save->cssel);
+ num64 = hi & 0xffff;
+ num64 = (num64 << 32) | lo;
+ fir = (fir & (~0xffffffffffffUL)) | num64;
+
+ /* setting bits 0..47 with datasel and dataoff */
+ __get_user(lo, (unsigned int __user *)&save->dataoff);
+ __get_user(hi, (unsigned int __user *)&save->datasel);
+ num64 = hi & 0xffff;
+ num64 = (num64 << 32) | lo;
+ fdr = (fdr & (~0xffffffffffffUL)) | num64;
+
+ ia64_setreg(_IA64_REG_AR_FSR, fsr);
+ ia64_setreg(_IA64_REG_AR_FCR, fcr);
+ ia64_setreg(_IA64_REG_AR_FIR, fir);
+ ia64_setreg(_IA64_REG_AR_FDR, fdr);
+
+ /*
+ * restore f8..f11 onto pt_regs
+ * restore f12..f15 onto live registers
+ */
+ /*
+ * Find the location where f8 has to go in fp reg stack. This depends on
+ * TOP(11:13) field of sw. Other f reg continue sequentially from where f8 maps
+ * to.
+ */
+ fp_tos = (fsr>>11)&0x7;
+ fr8_st_map = (8-fp_tos)&0x7;
+ fpregp = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
+
+ ptp = ia64_task_regs(tsk);
+ copy_from_user(fpregp, &save->_st[(0+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia32f2ia64f(&ptp->f8, fpregp);
+ copy_from_user(fpregp, &save->_st[(1+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia32f2ia64f(&ptp->f9, fpregp);
+ copy_from_user(fpregp, &save->_st[(2+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia32f2ia64f(&ptp->f10, fpregp);
+ copy_from_user(fpregp, &save->_st[(3+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia32f2ia64f(&ptp->f11, fpregp);
+
+ copy_from_user(fpregp, &save->_st[(4+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia64_ldfe(12, fpregp);
+ copy_from_user(fpregp, &save->_st[(5+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia64_ldfe(13, fpregp);
+ copy_from_user(fpregp, &save->_st[(6+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia64_ldfe(14, fpregp);
+ copy_from_user(fpregp, &save->_st[(7+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
+ ia64_ldfe(15, fpregp);
+
+ copy_from_user(num128, &save->_xmm[0], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(16, &num128[0]);
+ ia64_ldf8(17, &num128[1]);
+
+ copy_from_user(num128, &save->_xmm[1], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(18, &num128[0]);
+ ia64_ldf8(19, &num128[1]);
+
+ copy_from_user(num128, &save->_xmm[2], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(20, &num128[0]);
+ ia64_ldf8(21, &num128[1]);
+
+ copy_from_user(num128, &save->_xmm[3], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(22, &num128[0]);
+ ia64_ldf8(23, &num128[1]);
+
+ copy_from_user(num128, &save->_xmm[4], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(24, &num128[0]);
+ ia64_ldf8(25, &num128[1]);
+
+ copy_from_user(num128, &save->_xmm[5], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(26, &num128[0]);
+ ia64_ldf8(27, &num128[1]);
+
+ copy_from_user(num128, &save->_xmm[6], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(28, &num128[0]);
+ ia64_ldf8(29, &num128[1]);
+
+ copy_from_user(num128, &save->_xmm[7], sizeof(struct _xmmreg_ia32));
+ ia64_ldf8(30, &num128[0]);
+ ia64_ldf8(31, &num128[1]);
+ return 0;
+}
+
+static inline void
+sigact_set_handler (struct k_sigaction *sa, unsigned int handler, unsigned int restorer)
+{
+ if (handler + 1 <= 2)
+ /* SIG_DFL, SIG_IGN, or SIG_ERR: must sign-extend to 64-bits */
+ sa->sa.sa_handler = (__sighandler_t) A((int) handler);
+ else
+ sa->sa.sa_handler = (__sighandler_t) (((unsigned long) restorer << 32) | handler);
+}
+
+long
+__ia32_rt_sigsuspend (compat_sigset_t *sset, unsigned int sigsetsize, struct sigscratch *scr)
+{
+ extern long ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall);
+ sigset_t oldset, set;
+
+ scr->scratch_unat = 0; /* avoid leaking kernel bits to user level */
+ memset(&set, 0, sizeof(&set));
+
+ if (memcpy(&set.sig, &sset->sig, sigsetsize))
+ return -EFAULT;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+
+ spin_lock_irq(&current->sighand->siglock);
+ {
+ oldset = current->blocked;
+ current->blocked = set;
+ recalc_sigpending();
+ }
+ spin_unlock_irq(&current->sighand->siglock);
+
+ /*
+ * The return below usually returns to the signal handler. We need to pre-set the
+ * correct error code here to ensure that the right values get saved in sigcontext
+ * by ia64_do_signal.
+ */
+ scr->pt.r8 = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (ia64_do_signal(&oldset, scr, 1))
+ return -EINTR;
+ }
+}
+
+asmlinkage long
+ia32_rt_sigsuspend (compat_sigset_t __user *uset, unsigned int sigsetsize, struct sigscratch *scr)
+{
+ compat_sigset_t set;
+
+ if (sigsetsize > sizeof(compat_sigset_t))
+ return -EINVAL;
+
+ if (copy_from_user(&set.sig, &uset->sig, sigsetsize))
+ return -EFAULT;
+
+ return __ia32_rt_sigsuspend(&set, sigsetsize, scr);
+}
+
+asmlinkage long
+ia32_sigsuspend (unsigned int mask, struct sigscratch *scr)
+{
+ return __ia32_rt_sigsuspend((compat_sigset_t *) &mask, sizeof(mask), scr);
+}
+
+asmlinkage long
+sys32_signal (int sig, unsigned int handler)
+{
+ struct k_sigaction new_sa, old_sa;
+ int ret;
+
+ sigact_set_handler(&new_sa, handler, 0);
+ new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
+
+ ret = do_sigaction(sig, &new_sa, &old_sa);
+
+ return ret ? ret : IA32_SA_HANDLER(&old_sa);
+}
+
+asmlinkage long
+sys32_rt_sigaction (int sig, struct sigaction32 __user *act,
+ struct sigaction32 __user *oact, unsigned int sigsetsize)
+{
+ struct k_sigaction new_ka, old_ka;
+ unsigned int handler, restorer;
+ int ret;
+
+ /* XXX: Don't preclude handling different sized sigset_t's. */
+ if (sigsetsize != sizeof(compat_sigset_t))
+ return -EINVAL;
+
+ if (act) {
+ ret = get_user(handler, &act->sa_handler);
+ ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ ret |= get_user(restorer, &act->sa_restorer);
+ ret |= copy_from_user(&new_ka.sa.sa_mask, &act->sa_mask, sizeof(compat_sigset_t));
+ if (ret)
+ return -EFAULT;
+
+ sigact_set_handler(&new_ka, handler, restorer);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ ret = put_user(IA32_SA_HANDLER(&old_ka), &oact->sa_handler);
+ ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ ret |= put_user(IA32_SA_RESTORER(&old_ka), &oact->sa_restorer);
+ ret |= copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask, sizeof(compat_sigset_t));
+ }
+ return ret;
+}
+
+
+asmlinkage long
+sys32_rt_sigprocmask (int how, compat_sigset_t __user *set, compat_sigset_t __user *oset,
+ unsigned int sigsetsize)
+{
+ mm_segment_t old_fs = get_fs();
+ sigset_t s;
+ long ret;
+
+ if (sigsetsize > sizeof(s))
+ return -EINVAL;
+
+ if (set) {
+ memset(&s, 0, sizeof(s));
+ if (copy_from_user(&s.sig, set, sigsetsize))
+ return -EFAULT;
+ }
+ set_fs(KERNEL_DS);
+ ret = sys_rt_sigprocmask(how,
+ set ? (sigset_t __user *) &s : NULL,
+ oset ? (sigset_t __user *) &s : NULL, sizeof(s));
+ set_fs(old_fs);
+ if (ret)
+ return ret;
+ if (oset) {
+ if (copy_to_user(oset, &s.sig, sigsetsize))
+ return -EFAULT;
+ }
+ return 0;
+}
+
+asmlinkage long
+sys32_rt_sigqueueinfo (int pid, int sig, compat_siginfo_t __user *uinfo)
+{
+ mm_segment_t old_fs = get_fs();
+ siginfo_t info;
+ int ret;
+
+ if (copy_siginfo_from_user32(&info, uinfo))
+ return -EFAULT;
+ set_fs(KERNEL_DS);
+ ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
+ set_fs(old_fs);
+ return ret;
+}
+
+asmlinkage long
+sys32_sigaction (int sig, struct old_sigaction32 __user *act, struct old_sigaction32 __user *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ unsigned int handler, restorer;
+ int ret;
+
+ if (act) {
+ compat_old_sigset_t mask;
+
+ ret = get_user(handler, &act->sa_handler);
+ ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ ret |= get_user(restorer, &act->sa_restorer);
+ ret |= get_user(mask, &act->sa_mask);
+ if (ret)
+ return ret;
+
+ sigact_set_handler(&new_ka, handler, restorer);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ ret = put_user(IA32_SA_HANDLER(&old_ka), &oact->sa_handler);
+ ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ ret |= put_user(IA32_SA_RESTORER(&old_ka), &oact->sa_restorer);
+ ret |= put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+static int
+setup_sigcontext_ia32 (struct sigcontext_ia32 __user *sc, struct _fpstate_ia32 __user *fpstate,
+ struct pt_regs *regs, unsigned long mask)
+{
+ int err = 0;
+ unsigned long flag;
+
+ if (!access_ok(VERIFY_WRITE, sc, sizeof(*sc)))
+ return -EFAULT;
+
+ err |= __put_user((regs->r16 >> 32) & 0xffff, (unsigned int __user *)&sc->fs);
+ err |= __put_user((regs->r16 >> 48) & 0xffff, (unsigned int __user *)&sc->gs);
+ err |= __put_user((regs->r16 >> 16) & 0xffff, (unsigned int __user *)&sc->es);
+ err |= __put_user(regs->r16 & 0xffff, (unsigned int __user *)&sc->ds);
+ err |= __put_user(regs->r15, &sc->edi);
+ err |= __put_user(regs->r14, &sc->esi);
+ err |= __put_user(regs->r13, &sc->ebp);
+ err |= __put_user(regs->r12, &sc->esp);
+ err |= __put_user(regs->r11, &sc->ebx);
+ err |= __put_user(regs->r10, &sc->edx);
+ err |= __put_user(regs->r9, &sc->ecx);
+ err |= __put_user(regs->r8, &sc->eax);
+#if 0
+ err |= __put_user(current->tss.trap_no, &sc->trapno);
+ err |= __put_user(current->tss.error_code, &sc->err);
+#endif
+ err |= __put_user(regs->cr_iip, &sc->eip);
+ err |= __put_user(regs->r17 & 0xffff, (unsigned int __user *)&sc->cs);
+ /*
+ * `eflags' is in an ar register for this context
+ */
+ flag = ia64_getreg(_IA64_REG_AR_EFLAG);
+ err |= __put_user((unsigned int)flag, &sc->eflags);
+ err |= __put_user(regs->r12, &sc->esp_at_signal);
+ err |= __put_user((regs->r17 >> 16) & 0xffff, (unsigned int __user *)&sc->ss);
+
+ if ( save_ia32_fpstate_live(fpstate) < 0 )
+ err = -EFAULT;
+ else
+ err |= __put_user((u32)(u64)fpstate, &sc->fpstate);
+
+#if 0
+ tmp = save_i387(fpstate);
+ if (tmp < 0)
+ err = 1;
+ else
+ err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
+
+ /* non-iBCS2 extensions.. */
+#endif
+ err |= __put_user(mask, &sc->oldmask);
+#if 0
+ err |= __put_user(current->tss.cr2, &sc->cr2);
+#endif
+ return err;
+}
+
+static int
+restore_sigcontext_ia32 (struct pt_regs *regs, struct sigcontext_ia32 __user *sc, int *peax)
+{
+ unsigned int err = 0;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
+ return(-EFAULT);
+
+#define COPY(ia64x, ia32x) err |= __get_user(regs->ia64x, &sc->ia32x)
+
+#define copyseg_gs(tmp) (regs->r16 |= (unsigned long) (tmp) << 48)
+#define copyseg_fs(tmp) (regs->r16 |= (unsigned long) (tmp) << 32)
+#define copyseg_cs(tmp) (regs->r17 |= tmp)
+#define copyseg_ss(tmp) (regs->r17 |= (unsigned long) (tmp) << 16)
+#define copyseg_es(tmp) (regs->r16 |= (unsigned long) (tmp) << 16)
+#define copyseg_ds(tmp) (regs->r16 |= tmp)
+
+#define COPY_SEG(seg) \
+ { \
+ unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ copyseg_##seg(tmp); \
+ }
+#define COPY_SEG_STRICT(seg) \
+ { \
+ unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ copyseg_##seg(tmp|3); \
+ }
+
+ /* To make COPY_SEGs easier, we zero r16, r17 */
+ regs->r16 = 0;
+ regs->r17 = 0;
+
+ COPY_SEG(gs);
+ COPY_SEG(fs);
+ COPY_SEG(es);
+ COPY_SEG(ds);
+ COPY(r15, edi);
+ COPY(r14, esi);
+ COPY(r13, ebp);
+ COPY(r12, esp);
+ COPY(r11, ebx);
+ COPY(r10, edx);
+ COPY(r9, ecx);
+ COPY(cr_iip, eip);
+ COPY_SEG_STRICT(cs);
+ COPY_SEG_STRICT(ss);
+ ia32_load_segment_descriptors(current);
+ {
+ unsigned int tmpflags;
+ unsigned long flag;
+
+ /*
+ * IA32 `eflags' is not part of `pt_regs', it's in an ar register which
+ * is part of the thread context. Fortunately, we are executing in the
+ * IA32 process's context.
+ */
+ err |= __get_user(tmpflags, &sc->eflags);
+ flag = ia64_getreg(_IA64_REG_AR_EFLAG);
+ flag &= ~0x40DD5;
+ flag |= (tmpflags & 0x40DD5);
+ ia64_setreg(_IA64_REG_AR_EFLAG, flag);
+
+ regs->r1 = -1; /* disable syscall checks, r1 is orig_eax */
+ }
+
+ {
+ struct _fpstate_ia32 __user *buf = NULL;
+ u32 fpstate_ptr;
+ err |= get_user(fpstate_ptr, &(sc->fpstate));
+ buf = compat_ptr(fpstate_ptr);
+ if (buf) {
+ err |= restore_ia32_fpstate_live(buf);
+ }
+ }
+
+#if 0
+ {
+ struct _fpstate * buf;
+ err |= __get_user(buf, &sc->fpstate);
+ if (buf) {
+ if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
+ goto badframe;
+ err |= restore_i387(buf);
+ }
+ }
+#endif
+
+ err |= __get_user(*peax, &sc->eax);
+ return err;
+
+#if 0
+ badframe:
+ return 1;
+#endif
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe (struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+{
+ unsigned long esp;
+
+ /* Default to using normal stack (truncate off sign-extension of bit 31: */
+ esp = (unsigned int) regs->r12;
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!on_sig_stack(esp))
+ esp = current->sas_ss_sp + current->sas_ss_size;
+ }
+ /* Legacy stack switching not supported */
+
+ return (void __user *)((esp - frame_size) & -8ul);
+}
+
+static int
+setup_frame_ia32 (int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs * regs)
+{
+ struct exec_domain *ed = current_thread_info()->exec_domain;
+ struct sigframe_ia32 __user *frame;
+ int err = 0;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ err |= __put_user((ed && ed->signal_invmap && sig < 32
+ ? (int)(ed->signal_invmap[sig]) : sig), &frame->sig);
+
+ err |= setup_sigcontext_ia32(&frame->sc, &frame->fpstate, regs, set->sig[0]);
+
+ if (_COMPAT_NSIG_WORDS > 1)
+ err |= __copy_to_user(frame->extramask, (char *) &set->sig + 4,
+ sizeof(frame->extramask));
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ unsigned int restorer = IA32_SA_RESTORER(ka);
+ err |= __put_user(restorer, &frame->pretcode);
+ } else {
+ /* Pointing to restorer in ia32 gate page */
+ err |= __put_user(IA32_GATE_OFFSET, &frame->pretcode);
+ }
+
+ /* This is popl %eax ; movl $,%eax ; int $0x80
+ * and there for historical reasons only.
+ * See arch/i386/kernel/signal.c
+ */
+
+ err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
+ err |= __put_user(__IA32_NR_sigreturn, (int __user *)(frame->retcode+2));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->r12 = (unsigned long) frame;
+ regs->cr_iip = IA32_SA_HANDLER(ka);
+
+ set_fs(USER_DS);
+
+#if 0
+ regs->eflags &= ~TF_MASK;
+#endif
+
+#if 0
+ printk("SIG deliver (%s:%d): sig=%d sp=%p pc=%lx ra=%x\n",
+ current->comm, current->pid, sig, (void *) frame, regs->cr_iip, frame->pretcode);
+#endif
+
+ return 1;
+
+ give_sigsegv:
+ force_sigsegv(sig, current);
+ return 0;
+}
+
+static int
+setup_rt_frame_ia32 (int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs * regs)
+{
+ struct exec_domain *ed = current_thread_info()->exec_domain;
+ compat_uptr_t pinfo, puc;
+ struct rt_sigframe_ia32 __user *frame;
+ int err = 0;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ err |= __put_user((ed && ed->signal_invmap
+ && sig < 32 ? ed->signal_invmap[sig] : sig), &frame->sig);
+
+ pinfo = (long __user) &frame->info;
+ puc = (long __user) &frame->uc;
+ err |= __put_user(pinfo, &frame->pinfo);
+ err |= __put_user(puc, &frame->puc);
+ err |= copy_siginfo_to_user32(&frame->info, info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->r12), &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= setup_sigcontext_ia32(&frame->uc.uc_mcontext, &frame->fpstate, regs, set->sig[0]);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ unsigned int restorer = IA32_SA_RESTORER(ka);
+ err |= __put_user(restorer, &frame->pretcode);
+ } else {
+ /* Pointing to rt_restorer in ia32 gate page */
+ err |= __put_user(IA32_GATE_OFFSET + 8, &frame->pretcode);
+ }
+
+ /* This is movl $,%eax ; int $0x80
+ * and there for historical reasons only.
+ * See arch/i386/kernel/signal.c
+ */
+
+ err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
+ err |= __put_user(__IA32_NR_rt_sigreturn, (int __user *)(frame->retcode+1));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->r12 = (unsigned long) frame;
+ regs->cr_iip = IA32_SA_HANDLER(ka);
+
+ set_fs(USER_DS);
+
+#if 0
+ regs->eflags &= ~TF_MASK;
+#endif
+
+#if 0
+ printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%x\n",
+ current->comm, current->pid, (void *) frame, regs->cr_iip, frame->pretcode);
+#endif
+
+ return 1;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+ return 0;
+}
+
+int
+ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ return setup_rt_frame_ia32(sig, ka, info, set, regs);
+ else
+ return setup_frame_ia32(sig, ka, set, regs);
+}
+
+asmlinkage long
+sys32_sigreturn (int arg0, int arg1, int arg2, int arg3, int arg4, int arg5,
+ int arg6, int arg7, struct pt_regs regs)
+{
+ unsigned long esp = (unsigned int) regs.r12;
+ struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(esp - 8);
+ sigset_t set;
+ int eax;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__get_user(set.sig[0], &frame->sc.oldmask)
+ || (_COMPAT_NSIG_WORDS > 1 && __copy_from_user((char *) &set.sig + 4, &frame->extramask,
+ sizeof(frame->extramask))))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext_ia32(&regs, &frame->sc, &eax))
+ goto badframe;
+ return eax;
+
+ badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+asmlinkage long
+sys32_rt_sigreturn (int arg0, int arg1, int arg2, int arg3, int arg4,
+ int arg5, int arg6, int arg7, struct pt_regs regs)
+{
+ unsigned long esp = (unsigned int) regs.r12;
+ struct rt_sigframe_ia32 __user *frame = (struct rt_sigframe_ia32 __user *)(esp - 4);
+ sigset_t set;
+ int eax;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext_ia32(&regs, &frame->uc.uc_mcontext, &eax))
+ goto badframe;
+
+ /* It is more difficult to avoid calling this function than to
+ call it and ignore errors. */
+ do_sigaltstack((stack_t __user *) &frame->uc.uc_stack, NULL, esp);
+
+ return eax;
+
+ badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
diff --git a/arch/ia64/ia32/ia32_support.c b/arch/ia64/ia32/ia32_support.c
new file mode 100644
index 000000000000..4f630043b3ae
--- /dev/null
+++ b/arch/ia64/ia32/ia32_support.c
@@ -0,0 +1,264 @@
+/*
+ * IA32 helper functions
+ *
+ * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
+ * Copyright (C) 2000 Asit K. Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 2001-2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 06/16/00 A. Mallick added csd/ssd/tssd for ia32 thread context
+ * 02/19/01 D. Mosberger dropped tssd; it's not needed
+ * 09/14/01 D. Mosberger fixed memory management for gdt/tss page
+ * 09/29/01 D. Mosberger added ia32_load_segment_descriptors()
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/personality.h>
+#include <linux/sched.h>
+
+#include <asm/intrinsics.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+
+#include "ia32priv.h"
+
+extern void die_if_kernel (char *str, struct pt_regs *regs, long err);
+
+struct exec_domain ia32_exec_domain;
+struct page *ia32_shared_page[NR_CPUS];
+unsigned long *ia32_boot_gdt;
+unsigned long *cpu_gdt_table[NR_CPUS];
+struct page *ia32_gate_page;
+
+static unsigned long
+load_desc (u16 selector)
+{
+ unsigned long *table, limit, index;
+
+ if (!selector)
+ return 0;
+ if (selector & IA32_SEGSEL_TI) {
+ table = (unsigned long *) IA32_LDT_OFFSET;
+ limit = IA32_LDT_ENTRIES;
+ } else {
+ table = cpu_gdt_table[smp_processor_id()];
+ limit = IA32_PAGE_SIZE / sizeof(ia32_boot_gdt[0]);
+ }
+ index = selector >> IA32_SEGSEL_INDEX_SHIFT;
+ if (index >= limit)
+ return 0;
+ return IA32_SEG_UNSCRAMBLE(table[index]);
+}
+
+void
+ia32_load_segment_descriptors (struct task_struct *task)
+{
+ struct pt_regs *regs = ia64_task_regs(task);
+
+ /* Setup the segment descriptors */
+ regs->r24 = load_desc(regs->r16 >> 16); /* ESD */
+ regs->r27 = load_desc(regs->r16 >> 0); /* DSD */
+ regs->r28 = load_desc(regs->r16 >> 32); /* FSD */
+ regs->r29 = load_desc(regs->r16 >> 48); /* GSD */
+ regs->ar_csd = load_desc(regs->r17 >> 0); /* CSD */
+ regs->ar_ssd = load_desc(regs->r17 >> 16); /* SSD */
+}
+
+int
+ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs)
+{
+ struct desc_struct *desc;
+ struct ia32_user_desc info;
+ int idx;
+
+ if (copy_from_user(&info, (void __user *)(childregs->r14 & 0xffffffff), sizeof(info)))
+ return -EFAULT;
+ if (LDT_empty(&info))
+ return -EINVAL;
+
+ idx = info.entry_number;
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+ desc->a = LDT_entry_a(&info);
+ desc->b = LDT_entry_b(&info);
+
+ /* XXX: can this be done in a cleaner way ? */
+ load_TLS(&child->thread, smp_processor_id());
+ ia32_load_segment_descriptors(child);
+ load_TLS(&current->thread, smp_processor_id());
+
+ return 0;
+}
+
+void
+ia32_save_state (struct task_struct *t)
+{
+ t->thread.eflag = ia64_getreg(_IA64_REG_AR_EFLAG);
+ t->thread.fsr = ia64_getreg(_IA64_REG_AR_FSR);
+ t->thread.fcr = ia64_getreg(_IA64_REG_AR_FCR);
+ t->thread.fir = ia64_getreg(_IA64_REG_AR_FIR);
+ t->thread.fdr = ia64_getreg(_IA64_REG_AR_FDR);
+ ia64_set_kr(IA64_KR_IO_BASE, t->thread.old_iob);
+ ia64_set_kr(IA64_KR_TSSD, t->thread.old_k1);
+}
+
+void
+ia32_load_state (struct task_struct *t)
+{
+ unsigned long eflag, fsr, fcr, fir, fdr, tssd;
+ struct pt_regs *regs = ia64_task_regs(t);
+
+ eflag = t->thread.eflag;
+ fsr = t->thread.fsr;
+ fcr = t->thread.fcr;
+ fir = t->thread.fir;
+ fdr = t->thread.fdr;
+ tssd = load_desc(_TSS); /* TSSD */
+
+ ia64_setreg(_IA64_REG_AR_EFLAG, eflag);
+ ia64_setreg(_IA64_REG_AR_FSR, fsr);
+ ia64_setreg(_IA64_REG_AR_FCR, fcr);
+ ia64_setreg(_IA64_REG_AR_FIR, fir);
+ ia64_setreg(_IA64_REG_AR_FDR, fdr);
+ current->thread.old_iob = ia64_get_kr(IA64_KR_IO_BASE);
+ current->thread.old_k1 = ia64_get_kr(IA64_KR_TSSD);
+ ia64_set_kr(IA64_KR_IO_BASE, IA32_IOBASE);
+ ia64_set_kr(IA64_KR_TSSD, tssd);
+
+ regs->r17 = (_TSS << 48) | (_LDT << 32) | (__u32) regs->r17;
+ regs->r30 = load_desc(_LDT); /* LDTD */
+ load_TLS(&t->thread, smp_processor_id());
+}
+
+/*
+ * Setup IA32 GDT and TSS
+ */
+void
+ia32_gdt_init (void)
+{
+ int cpu = smp_processor_id();
+
+ ia32_shared_page[cpu] = alloc_page(GFP_KERNEL);
+ if (!ia32_shared_page[cpu])
+ panic("failed to allocate ia32_shared_page[%d]\n", cpu);
+
+ cpu_gdt_table[cpu] = page_address(ia32_shared_page[cpu]);
+
+ /* Copy from the boot cpu's GDT */
+ memcpy(cpu_gdt_table[cpu], ia32_boot_gdt, PAGE_SIZE);
+}
+
+
+/*
+ * Setup IA32 GDT and TSS
+ */
+static void
+ia32_boot_gdt_init (void)
+{
+ unsigned long ldt_size;
+
+ ia32_shared_page[0] = alloc_page(GFP_KERNEL);
+ if (!ia32_shared_page[0])
+ panic("failed to allocate ia32_shared_page[0]\n");
+
+ ia32_boot_gdt = page_address(ia32_shared_page[0]);
+ cpu_gdt_table[0] = ia32_boot_gdt;
+
+ /* CS descriptor in IA-32 (scrambled) format */
+ ia32_boot_gdt[__USER_CS >> 3]
+ = IA32_SEG_DESCRIPTOR(0, (IA32_GATE_END-1) >> IA32_PAGE_SHIFT,
+ 0xb, 1, 3, 1, 1, 1, 1);
+
+ /* DS descriptor in IA-32 (scrambled) format */
+ ia32_boot_gdt[__USER_DS >> 3]
+ = IA32_SEG_DESCRIPTOR(0, (IA32_GATE_END-1) >> IA32_PAGE_SHIFT,
+ 0x3, 1, 3, 1, 1, 1, 1);
+
+ ldt_size = PAGE_ALIGN(IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE);
+ ia32_boot_gdt[TSS_ENTRY] = IA32_SEG_DESCRIPTOR(IA32_TSS_OFFSET, 235,
+ 0xb, 0, 3, 1, 1, 1, 0);
+ ia32_boot_gdt[LDT_ENTRY] = IA32_SEG_DESCRIPTOR(IA32_LDT_OFFSET, ldt_size - 1,
+ 0x2, 0, 3, 1, 1, 1, 0);
+}
+
+static void
+ia32_gate_page_init(void)
+{
+ unsigned long *sr;
+
+ ia32_gate_page = alloc_page(GFP_KERNEL);
+ sr = page_address(ia32_gate_page);
+ /* This is popl %eax ; movl $,%eax ; int $0x80 */
+ *sr++ = 0xb858 | (__IA32_NR_sigreturn << 16) | (0x80cdUL << 48);
+
+ /* This is movl $,%eax ; int $0x80 */
+ *sr = 0xb8 | (__IA32_NR_rt_sigreturn << 8) | (0x80cdUL << 40);
+}
+
+void
+ia32_mem_init(void)
+{
+ ia32_boot_gdt_init();
+ ia32_gate_page_init();
+}
+
+/*
+ * Handle bad IA32 interrupt via syscall
+ */
+void
+ia32_bad_interrupt (unsigned long int_num, struct pt_regs *regs)
+{
+ siginfo_t siginfo;
+
+ die_if_kernel("Bad IA-32 interrupt", regs, int_num);
+
+ siginfo.si_signo = SIGTRAP;
+ siginfo.si_errno = int_num; /* XXX is it OK to abuse si_errno like this? */
+ siginfo.si_flags = 0;
+ siginfo.si_isr = 0;
+ siginfo.si_addr = NULL;
+ siginfo.si_imm = 0;
+ siginfo.si_code = TRAP_BRKPT;
+ force_sig_info(SIGTRAP, &siginfo, current);
+}
+
+void
+ia32_cpu_init (void)
+{
+ /* initialize global ia32 state - CR0 and CR4 */
+ ia64_setreg(_IA64_REG_AR_CFLAG, (((ulong) IA32_CR4 << 32) | IA32_CR0));
+}
+
+static int __init
+ia32_init (void)
+{
+ ia32_exec_domain.name = "Linux/x86";
+ ia32_exec_domain.handler = NULL;
+ ia32_exec_domain.pers_low = PER_LINUX32;
+ ia32_exec_domain.pers_high = PER_LINUX32;
+ ia32_exec_domain.signal_map = default_exec_domain.signal_map;
+ ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
+ register_exec_domain(&ia32_exec_domain);
+
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+ {
+ extern kmem_cache_t *partial_page_cachep;
+
+ partial_page_cachep = kmem_cache_create("partial_page_cache",
+ sizeof(struct partial_page), 0, 0,
+ NULL, NULL);
+ if (!partial_page_cachep)
+ panic("Cannot create partial page SLAB cache");
+ }
+#endif
+ return 0;
+}
+
+__initcall(ia32_init);
diff --git a/arch/ia64/ia32/ia32_traps.c b/arch/ia64/ia32/ia32_traps.c
new file mode 100644
index 000000000000..e486042672f1
--- /dev/null
+++ b/arch/ia64/ia32/ia32_traps.c
@@ -0,0 +1,156 @@
+/*
+ * IA-32 exception handlers
+ *
+ * Copyright (C) 2000 Asit K. Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 2001-2002 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 06/16/00 A. Mallick added siginfo for most cases (close to IA32)
+ * 09/29/00 D. Mosberger added ia32_intercept()
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include "ia32priv.h"
+
+#include <asm/intrinsics.h>
+#include <asm/ptrace.h>
+
+int
+ia32_intercept (struct pt_regs *regs, unsigned long isr)
+{
+ switch ((isr >> 16) & 0xff) {
+ case 0: /* Instruction intercept fault */
+ case 4: /* Locked Data reference fault */
+ case 1: /* Gate intercept trap */
+ return -1;
+
+ case 2: /* System flag trap */
+ if (((isr >> 14) & 0x3) >= 2) {
+ /* MOV SS, POP SS instructions */
+ ia64_psr(regs)->id = 1;
+ return 0;
+ } else
+ return -1;
+ }
+ return -1;
+}
+
+int
+ia32_exception (struct pt_regs *regs, unsigned long isr)
+{
+ struct siginfo siginfo;
+
+ /* initialize these fields to avoid leaking kernel bits to user space: */
+ siginfo.si_errno = 0;
+ siginfo.si_flags = 0;
+ siginfo.si_isr = 0;
+ siginfo.si_imm = 0;
+ switch ((isr >> 16) & 0xff) {
+ case 1:
+ case 2:
+ siginfo.si_signo = SIGTRAP;
+ if (isr == 0)
+ siginfo.si_code = TRAP_TRACE;
+ else if (isr & 0x4)
+ siginfo.si_code = TRAP_BRANCH;
+ else
+ siginfo.si_code = TRAP_BRKPT;
+ break;
+
+ case 3:
+ siginfo.si_signo = SIGTRAP;
+ siginfo.si_code = TRAP_BRKPT;
+ break;
+
+ case 0: /* Divide fault */
+ siginfo.si_signo = SIGFPE;
+ siginfo.si_code = FPE_INTDIV;
+ break;
+
+ case 4: /* Overflow */
+ case 5: /* Bounds fault */
+ siginfo.si_signo = SIGFPE;
+ siginfo.si_code = 0;
+ break;
+
+ case 6: /* Invalid Op-code */
+ siginfo.si_signo = SIGILL;
+ siginfo.si_code = ILL_ILLOPN;
+ break;
+
+ case 7: /* FP DNA */
+ case 8: /* Double Fault */
+ case 9: /* Invalid TSS */
+ case 11: /* Segment not present */
+ case 12: /* Stack fault */
+ case 13: /* General Protection Fault */
+ siginfo.si_signo = SIGSEGV;
+ siginfo.si_code = 0;
+ break;
+
+ case 16: /* Pending FP error */
+ {
+ unsigned long fsr, fcr;
+
+ fsr = ia64_getreg(_IA64_REG_AR_FSR);
+ fcr = ia64_getreg(_IA64_REG_AR_FCR);
+
+ siginfo.si_signo = SIGFPE;
+ /*
+ * (~cwd & swd) will mask out exceptions that are not set to unmasked
+ * status. 0x3f is the exception bits in these regs, 0x200 is the
+ * C1 reg you need in case of a stack fault, 0x040 is the stack
+ * fault bit. We should only be taking one exception at a time,
+ * so if this combination doesn't produce any single exception,
+ * then we have a bad program that isn't synchronizing its FPU usage
+ * and it will suffer the consequences since we won't be able to
+ * fully reproduce the context of the exception
+ */
+ siginfo.si_isr = isr;
+ siginfo.si_flags = __ISR_VALID;
+ switch(((~fcr) & (fsr & 0x3f)) | (fsr & 0x240)) {
+ case 0x000:
+ default:
+ siginfo.si_code = 0;
+ break;
+ case 0x001: /* Invalid Op */
+ case 0x040: /* Stack Fault */
+ case 0x240: /* Stack Fault | Direction */
+ siginfo.si_code = FPE_FLTINV;
+ break;
+ case 0x002: /* Denormalize */
+ case 0x010: /* Underflow */
+ siginfo.si_code = FPE_FLTUND;
+ break;
+ case 0x004: /* Zero Divide */
+ siginfo.si_code = FPE_FLTDIV;
+ break;
+ case 0x008: /* Overflow */
+ siginfo.si_code = FPE_FLTOVF;
+ break;
+ case 0x020: /* Precision */
+ siginfo.si_code = FPE_FLTRES;
+ break;
+ }
+
+ break;
+ }
+
+ case 17: /* Alignment check */
+ siginfo.si_signo = SIGSEGV;
+ siginfo.si_code = BUS_ADRALN;
+ break;
+
+ case 19: /* SSE Numeric error */
+ siginfo.si_signo = SIGFPE;
+ siginfo.si_code = 0;
+ break;
+
+ default:
+ return -1;
+ }
+ force_sig_info(siginfo.si_signo, &siginfo, current);
+ return 0;
+}
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
new file mode 100644
index 000000000000..b2de948bdaea
--- /dev/null
+++ b/arch/ia64/ia32/ia32priv.h
@@ -0,0 +1,544 @@
+#ifndef _ASM_IA64_IA32_PRIV_H
+#define _ASM_IA64_IA32_PRIV_H
+
+#include <linux/config.h>
+
+#include <asm/ia32.h>
+
+#ifdef CONFIG_IA32_SUPPORT
+
+#include <linux/binfmts.h>
+#include <linux/compat.h>
+#include <linux/rbtree.h>
+
+#include <asm/processor.h>
+
+/*
+ * 32 bit structures for IA32 support.
+ */
+
+#define IA32_PAGE_SIZE (1UL << IA32_PAGE_SHIFT)
+#define IA32_PAGE_MASK (~(IA32_PAGE_SIZE - 1))
+#define IA32_PAGE_ALIGN(addr) (((addr) + IA32_PAGE_SIZE - 1) & IA32_PAGE_MASK)
+#define IA32_CLOCKS_PER_SEC 100 /* Cast in stone for IA32 Linux */
+
+/*
+ * partially mapped pages provide precise accounting of which 4k sub pages
+ * are mapped and which ones are not, thereby improving IA-32 compatibility.
+ */
+struct partial_page {
+ struct partial_page *next; /* linked list, sorted by address */
+ struct rb_node pp_rb;
+ /* 64K is the largest "normal" page supported by ia64 ABI. So 4K*32
+ * should suffice.*/
+ unsigned int bitmap;
+ unsigned int base;
+};
+
+struct partial_page_list {
+ struct partial_page *pp_head; /* list head, points to the lowest
+ * addressed partial page */
+ struct rb_root ppl_rb;
+ struct partial_page *pp_hint; /* pp_hint->next is the last
+ * accessed partial page */
+ atomic_t pp_count; /* reference count */
+};
+
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+struct partial_page_list* ia32_init_pp_list (void);
+#else
+# define ia32_init_pp_list() 0
+#endif
+
+/* sigcontext.h */
+/*
+ * As documented in the iBCS2 standard..
+ *
+ * The first part of "struct _fpstate" is just the
+ * normal i387 hardware setup, the extra "status"
+ * word is used to save the coprocessor status word
+ * before entering the handler.
+ */
+struct _fpreg_ia32 {
+ unsigned short significand[4];
+ unsigned short exponent;
+};
+
+struct _fpxreg_ia32 {
+ unsigned short significand[4];
+ unsigned short exponent;
+ unsigned short padding[3];
+};
+
+struct _xmmreg_ia32 {
+ unsigned int element[4];
+};
+
+
+struct _fpstate_ia32 {
+ unsigned int cw,
+ sw,
+ tag,
+ ipoff,
+ cssel,
+ dataoff,
+ datasel;
+ struct _fpreg_ia32 _st[8];
+ unsigned short status;
+ unsigned short magic; /* 0xffff = regular FPU data only */
+
+ /* FXSR FPU environment */
+ unsigned int _fxsr_env[6]; /* FXSR FPU env is ignored */
+ unsigned int mxcsr;
+ unsigned int reserved;
+ struct _fpxreg_ia32 _fxsr_st[8]; /* FXSR FPU reg data is ignored */
+ struct _xmmreg_ia32 _xmm[8];
+ unsigned int padding[56];
+};
+
+struct sigcontext_ia32 {
+ unsigned short gs, __gsh;
+ unsigned short fs, __fsh;
+ unsigned short es, __esh;
+ unsigned short ds, __dsh;
+ unsigned int edi;
+ unsigned int esi;
+ unsigned int ebp;
+ unsigned int esp;
+ unsigned int ebx;
+ unsigned int edx;
+ unsigned int ecx;
+ unsigned int eax;
+ unsigned int trapno;
+ unsigned int err;
+ unsigned int eip;
+ unsigned short cs, __csh;
+ unsigned int eflags;
+ unsigned int esp_at_signal;
+ unsigned short ss, __ssh;
+ unsigned int fpstate; /* really (struct _fpstate_ia32 *) */
+ unsigned int oldmask;
+ unsigned int cr2;
+};
+
+/* user.h */
+/*
+ * IA32 (Pentium III/4) FXSR, SSE support
+ *
+ * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
+ * interacting with the FXSR-format floating point environment. Floating
+ * point data can be accessed in the regular format in the usual manner,
+ * and both the standard and SIMD floating point data can be accessed via
+ * the new ptrace requests. In either case, changes to the FPU environment
+ * will be reflected in the task's state as expected.
+ */
+struct ia32_user_i387_struct {
+ int cwd;
+ int swd;
+ int twd;
+ int fip;
+ int fcs;
+ int foo;
+ int fos;
+ /* 8*10 bytes for each FP-reg = 80 bytes */
+ struct _fpreg_ia32 st_space[8];
+};
+
+struct ia32_user_fxsr_struct {
+ unsigned short cwd;
+ unsigned short swd;
+ unsigned short twd;
+ unsigned short fop;
+ int fip;
+ int fcs;
+ int foo;
+ int fos;
+ int mxcsr;
+ int reserved;
+ int st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */
+ int xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */
+ int padding[56];
+};
+
+/* signal.h */
+#define IA32_SET_SA_HANDLER(ka,handler,restorer) \
+ ((ka)->sa.sa_handler = (__sighandler_t) \
+ (((unsigned long)(restorer) << 32) \
+ | ((handler) & 0xffffffff)))
+#define IA32_SA_HANDLER(ka) ((unsigned long) (ka)->sa.sa_handler & 0xffffffff)
+#define IA32_SA_RESTORER(ka) ((unsigned long) (ka)->sa.sa_handler >> 32)
+
+#define __IA32_NR_sigreturn 119
+#define __IA32_NR_rt_sigreturn 173
+
+struct sigaction32 {
+ unsigned int sa_handler; /* Really a pointer, but need to deal with 32 bits */
+ unsigned int sa_flags;
+ unsigned int sa_restorer; /* Another 32 bit pointer */
+ compat_sigset_t sa_mask; /* A 32 bit mask */
+};
+
+struct old_sigaction32 {
+ unsigned int sa_handler; /* Really a pointer, but need to deal
+ with 32 bits */
+ compat_old_sigset_t sa_mask; /* A 32 bit mask */
+ unsigned int sa_flags;
+ unsigned int sa_restorer; /* Another 32 bit pointer */
+};
+
+typedef struct sigaltstack_ia32 {
+ unsigned int ss_sp;
+ int ss_flags;
+ unsigned int ss_size;
+} stack_ia32_t;
+
+struct ucontext_ia32 {
+ unsigned int uc_flags;
+ unsigned int uc_link;
+ stack_ia32_t uc_stack;
+ struct sigcontext_ia32 uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad0[4];
+ unsigned int __st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned long long st_rdev;
+ unsigned char __pad3[4];
+ unsigned int st_size_lo;
+ unsigned int st_size_hi;
+ unsigned int st_blksize;
+ unsigned int st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned int __pad4; /* future possible st_blocks high bits */
+ unsigned int st_atime;
+ unsigned int st_atime_nsec;
+ unsigned int st_mtime;
+ unsigned int st_mtime_nsec;
+ unsigned int st_ctime;
+ unsigned int st_ctime_nsec;
+ unsigned int st_ino_lo;
+ unsigned int st_ino_hi;
+};
+
+typedef struct compat_siginfo {
+ int si_signo;
+ int si_errno;
+ int si_code;
+
+ union {
+ int _pad[((128/sizeof(int)) - 3)];
+
+ /* kill() */
+ struct {
+ unsigned int _pid; /* sender's pid */
+ unsigned int _uid; /* sender's uid */
+ } _kill;
+
+ /* POSIX.1b timers */
+ struct {
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ char _pad[sizeof(unsigned int) - sizeof(int)];
+ compat_sigval_t _sigval; /* same as below */
+ int _sys_private; /* not to be passed to user */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ unsigned int _pid; /* sender's pid */
+ unsigned int _uid; /* sender's uid */
+ compat_sigval_t _sigval;
+ } _rt;
+
+ /* SIGCHLD */
+ struct {
+ unsigned int _pid; /* which child */
+ unsigned int _uid; /* sender's uid */
+ int _status; /* exit code */
+ compat_clock_t _utime;
+ compat_clock_t _stime;
+ } _sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ unsigned int _addr; /* faulting insn/memory ref. */
+ } _sigfault;
+
+ /* SIGPOLL */
+ struct {
+ int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
+ int _fd;
+ } _sigpoll;
+ } _sifields;
+} compat_siginfo_t;
+
+struct old_linux32_dirent {
+ u32 d_ino;
+ u32 d_offset;
+ u16 d_namlen;
+ char d_name[1];
+};
+
+/*
+ * IA-32 ELF specific definitions for IA-64.
+ */
+
+#define _ASM_IA64_ELF_H /* Don't include elf.h */
+
+#include <linux/sched.h>
+#include <asm/processor.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_386)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_386
+
+#define IA32_PAGE_OFFSET 0xc0000000
+#define IA32_STACK_TOP IA32_PAGE_OFFSET
+#define IA32_GATE_OFFSET IA32_PAGE_OFFSET
+#define IA32_GATE_END IA32_PAGE_OFFSET + PAGE_SIZE
+
+/*
+ * The system segments (GDT, TSS, LDT) have to be mapped below 4GB so the IA-32 engine can
+ * access them.
+ */
+#define IA32_GDT_OFFSET (IA32_PAGE_OFFSET + PAGE_SIZE)
+#define IA32_TSS_OFFSET (IA32_PAGE_OFFSET + 2*PAGE_SIZE)
+#define IA32_LDT_OFFSET (IA32_PAGE_OFFSET + 3*PAGE_SIZE)
+
+#define ELF_EXEC_PAGESIZE IA32_PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader. We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE (IA32_PAGE_OFFSET/3 + 0x1000000)
+
+void ia64_elf32_init(struct pt_regs *regs);
+#define ELF_PLAT_INIT(_r, load_addr) ia64_elf32_init(_r)
+
+#define elf_addr_t u32
+
+/* This macro yields a bitmask that programs can use to figure out
+ what instruction set this CPU supports. */
+#define ELF_HWCAP 0
+
+/* This macro yields a string that ld.so will use to load
+ implementation specific libraries for optimization. Not terribly
+ relevant until we have real hardware to play with... */
+#define ELF_PLATFORM NULL
+
+#ifdef __KERNEL__
+# define SET_PERSONALITY(EX,IBCS2) \
+ (current->personality = (IBCS2) ? PER_SVR4 : PER_LINUX)
+#endif
+
+#define IA32_EFLAG 0x200
+
+/*
+ * IA-32 ELF specific definitions for IA-64.
+ */
+
+#define __USER_CS 0x23
+#define __USER_DS 0x2B
+
+/*
+ * The per-cpu GDT has 32 entries: see <asm-i386/segment.h>
+ */
+#define GDT_ENTRIES 32
+
+#define GDT_SIZE (GDT_ENTRIES * 8)
+
+#define TSS_ENTRY 14
+#define LDT_ENTRY (TSS_ENTRY + 1)
+
+#define IA32_SEGSEL_RPL (0x3 << 0)
+#define IA32_SEGSEL_TI (0x1 << 2)
+#define IA32_SEGSEL_INDEX_SHIFT 3
+
+#define _TSS ((unsigned long) TSS_ENTRY << IA32_SEGSEL_INDEX_SHIFT)
+#define _LDT ((unsigned long) LDT_ENTRY << IA32_SEGSEL_INDEX_SHIFT)
+
+#define IA32_SEG_BASE 16
+#define IA32_SEG_TYPE 40
+#define IA32_SEG_SYS 44
+#define IA32_SEG_DPL 45
+#define IA32_SEG_P 47
+#define IA32_SEG_HIGH_LIMIT 48
+#define IA32_SEG_AVL 52
+#define IA32_SEG_DB 54
+#define IA32_SEG_G 55
+#define IA32_SEG_HIGH_BASE 56
+
+#define IA32_SEG_DESCRIPTOR(base, limit, segtype, nonsysseg, dpl, segpresent, avl, segdb, gran) \
+ (((limit) & 0xffff) \
+ | (((unsigned long) (base) & 0xffffff) << IA32_SEG_BASE) \
+ | ((unsigned long) (segtype) << IA32_SEG_TYPE) \
+ | ((unsigned long) (nonsysseg) << IA32_SEG_SYS) \
+ | ((unsigned long) (dpl) << IA32_SEG_DPL) \
+ | ((unsigned long) (segpresent) << IA32_SEG_P) \
+ | ((((unsigned long) (limit) >> 16) & 0xf) << IA32_SEG_HIGH_LIMIT) \
+ | ((unsigned long) (avl) << IA32_SEG_AVL) \
+ | ((unsigned long) (segdb) << IA32_SEG_DB) \
+ | ((unsigned long) (gran) << IA32_SEG_G) \
+ | ((((unsigned long) (base) >> 24) & 0xff) << IA32_SEG_HIGH_BASE))
+
+#define SEG_LIM 32
+#define SEG_TYPE 52
+#define SEG_SYS 56
+#define SEG_DPL 57
+#define SEG_P 59
+#define SEG_AVL 60
+#define SEG_DB 62
+#define SEG_G 63
+
+/* Unscramble an IA-32 segment descriptor into the IA-64 format. */
+#define IA32_SEG_UNSCRAMBLE(sd) \
+ ( (((sd) >> IA32_SEG_BASE) & 0xffffff) | ((((sd) >> IA32_SEG_HIGH_BASE) & 0xff) << 24) \
+ | ((((sd) & 0xffff) | ((((sd) >> IA32_SEG_HIGH_LIMIT) & 0xf) << 16)) << SEG_LIM) \
+ | ((((sd) >> IA32_SEG_TYPE) & 0xf) << SEG_TYPE) \
+ | ((((sd) >> IA32_SEG_SYS) & 0x1) << SEG_SYS) \
+ | ((((sd) >> IA32_SEG_DPL) & 0x3) << SEG_DPL) \
+ | ((((sd) >> IA32_SEG_P) & 0x1) << SEG_P) \
+ | ((((sd) >> IA32_SEG_AVL) & 0x1) << SEG_AVL) \
+ | ((((sd) >> IA32_SEG_DB) & 0x1) << SEG_DB) \
+ | ((((sd) >> IA32_SEG_G) & 0x1) << SEG_G))
+
+#define IA32_IOBASE 0x2000000000000000UL /* Virtual address for I/O space */
+
+#define IA32_CR0 0x80000001 /* Enable PG and PE bits */
+#define IA32_CR4 0x600 /* MMXEX and FXSR on */
+
+/*
+ * IA32 floating point control registers starting values
+ */
+
+#define IA32_FSR_DEFAULT 0x55550000 /* set all tag bits */
+#define IA32_FCR_DEFAULT 0x17800000037fUL /* extended precision, all masks */
+
+#define IA32_PTRACE_GETREGS 12
+#define IA32_PTRACE_SETREGS 13
+#define IA32_PTRACE_GETFPREGS 14
+#define IA32_PTRACE_SETFPREGS 15
+#define IA32_PTRACE_GETFPXREGS 18
+#define IA32_PTRACE_SETFPXREGS 19
+
+#define ia32_start_thread(regs,new_ip,new_sp) do { \
+ set_fs(USER_DS); \
+ ia64_psr(regs)->cpl = 3; /* set user mode */ \
+ ia64_psr(regs)->ri = 0; /* clear return slot number */ \
+ ia64_psr(regs)->is = 1; /* IA-32 instruction set */ \
+ regs->cr_iip = new_ip; \
+ regs->ar_rsc = 0xc; /* enforced lazy mode, priv. level 3 */ \
+ regs->ar_rnat = 0; \
+ regs->loadrs = 0; \
+ regs->r12 = new_sp; \
+} while (0)
+
+/*
+ * Local Descriptor Table (LDT) related declarations.
+ */
+
+#define IA32_LDT_ENTRIES 8192 /* Maximum number of LDT entries supported. */
+#define IA32_LDT_ENTRY_SIZE 8 /* The size of each LDT entry. */
+
+#define LDT_entry_a(info) \
+ ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+ (((info)->base_addr & 0xff000000) | \
+ (((info)->base_addr & 0x00ff0000) >> 16) | \
+ ((info)->limit & 0xf0000) | \
+ (((info)->read_exec_only ^ 1) << 9) | \
+ ((info)->contents << 10) | \
+ (((info)->seg_not_present ^ 1) << 15) | \
+ ((info)->seg_32bit << 22) | \
+ ((info)->limit_in_pages << 23) | \
+ ((info)->useable << 20) | \
+ 0x7100)
+
+#define LDT_empty(info) ( \
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 )
+
+static inline void
+load_TLS (struct thread_struct *t, unsigned int cpu)
+{
+ extern unsigned long *cpu_gdt_table[NR_CPUS];
+
+ memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0], sizeof(long));
+ memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1], sizeof(long));
+ memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2], sizeof(long));
+}
+
+struct ia32_user_desc {
+ unsigned int entry_number;
+ unsigned int base_addr;
+ unsigned int limit;
+ unsigned int seg_32bit:1;
+ unsigned int contents:2;
+ unsigned int read_exec_only:1;
+ unsigned int limit_in_pages:1;
+ unsigned int seg_not_present:1;
+ unsigned int useable:1;
+};
+
+struct linux_binprm;
+
+extern void ia32_init_addr_space (struct pt_regs *regs);
+extern int ia32_setup_arg_pages (struct linux_binprm *bprm, int exec_stack);
+extern unsigned long ia32_do_mmap (struct file *, unsigned long, unsigned long, int, int, loff_t);
+extern void ia32_load_segment_descriptors (struct task_struct *task);
+
+#define ia32f2ia64f(dst,src) \
+do { \
+ ia64_ldfe(6,src); \
+ ia64_stop(); \
+ ia64_stf_spill(dst, 6); \
+} while(0)
+
+#define ia64f2ia32f(dst,src) \
+do { \
+ ia64_ldf_fill(6, src); \
+ ia64_stop(); \
+ ia64_stfe(dst, 6); \
+} while(0)
+
+struct user_regs_struct32 {
+ __u32 ebx, ecx, edx, esi, edi, ebp, eax;
+ unsigned short ds, __ds, es, __es;
+ unsigned short fs, __fs, gs, __gs;
+ __u32 orig_eax, eip;
+ unsigned short cs, __cs;
+ __u32 eflags, esp;
+ unsigned short ss, __ss;
+};
+
+/* Prototypes for use in elfcore32.h */
+extern int save_ia32_fpstate (struct task_struct *, struct ia32_user_i387_struct __user *);
+extern int save_ia32_fpxstate (struct task_struct *, struct ia32_user_fxsr_struct __user *);
+
+#endif /* !CONFIG_IA32_SUPPORT */
+
+#endif /* _ASM_IA64_IA32_PRIV_H */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
new file mode 100644
index 000000000000..247a21c64aea
--- /dev/null
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -0,0 +1,2747 @@
+/*
+ * sys_ia32.c: Conversion between 32bit and 64bit native syscalls. Derived from sys_sparc32.c.
+ *
+ * Copyright (C) 2000 VA Linux Co
+ * Copyright (C) 2000 Don Dugger <n0ano@valinux.com>
+ * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000-2003, 2005 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2004 Gordon Jin <gordon.jin@intel.com>
+ *
+ * These routines maintain argument size conversion between 32bit and 64bit
+ * environment.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/syscalls.h>
+#include <linux/sysctl.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/signal.h>
+#include <linux/resource.h>
+#include <linux/times.h>
+#include <linux/utsname.h>
+#include <linux/timex.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/mm.h>
+#include <linux/shm.h>
+#include <linux/slab.h>
+#include <linux/uio.h>
+#include <linux/nfs_fs.h>
+#include <linux/quota.h>
+#include <linux/sunrpc/svc.h>
+#include <linux/nfsd/nfsd.h>
+#include <linux/nfsd/cache.h>
+#include <linux/nfsd/xdr.h>
+#include <linux/nfsd/syscall.h>
+#include <linux/poll.h>
+#include <linux/eventpoll.h>
+#include <linux/personality.h>
+#include <linux/ptrace.h>
+#include <linux/stat.h>
+#include <linux/ipc.h>
+#include <linux/compat.h>
+#include <linux/vfs.h>
+#include <linux/mman.h>
+
+#include <asm/intrinsics.h>
+#include <asm/semaphore.h>
+#include <asm/types.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+
+#include "ia32priv.h"
+
+#include <net/scm.h>
+#include <net/sock.h>
+
+#define DEBUG 0
+
+#if DEBUG
+# define DBG(fmt...) printk(KERN_DEBUG fmt)
+#else
+# define DBG(fmt...)
+#endif
+
+#define ROUND_UP(x,a) ((__typeof__(x))(((unsigned long)(x) + ((a) - 1)) & ~((a) - 1)))
+
+#define OFFSET4K(a) ((a) & 0xfff)
+#define PAGE_START(addr) ((addr) & PAGE_MASK)
+#define MINSIGSTKSZ_IA32 2048
+
+#define high2lowuid(uid) ((uid) > 65535 ? 65534 : (uid))
+#define high2lowgid(gid) ((gid) > 65535 ? 65534 : (gid))
+
+/*
+ * Anything that modifies or inspects ia32 user virtual memory must hold this semaphore
+ * while doing so.
+ */
+/* XXX make per-mm: */
+static DECLARE_MUTEX(ia32_mmap_sem);
+
+asmlinkage long
+sys32_execve (char __user *name, compat_uptr_t __user *argv, compat_uptr_t __user *envp,
+ struct pt_regs *regs)
+{
+ long error;
+ char *filename;
+ unsigned long old_map_base, old_task_size, tssd;
+
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ return error;
+
+ old_map_base = current->thread.map_base;
+ old_task_size = current->thread.task_size;
+ tssd = ia64_get_kr(IA64_KR_TSSD);
+
+ /* we may be exec'ing a 64-bit process: reset map base, task-size, and io-base: */
+ current->thread.map_base = DEFAULT_MAP_BASE;
+ current->thread.task_size = DEFAULT_TASK_SIZE;
+ ia64_set_kr(IA64_KR_IO_BASE, current->thread.old_iob);
+ ia64_set_kr(IA64_KR_TSSD, current->thread.old_k1);
+
+ error = compat_do_execve(filename, argv, envp, regs);
+ putname(filename);
+
+ if (error < 0) {
+ /* oops, execve failed, switch back to old values... */
+ ia64_set_kr(IA64_KR_IO_BASE, IA32_IOBASE);
+ ia64_set_kr(IA64_KR_TSSD, tssd);
+ current->thread.map_base = old_map_base;
+ current->thread.task_size = old_task_size;
+ }
+
+ return error;
+}
+
+int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
+{
+ int err;
+
+ if ((u64) stat->size > MAX_NON_LFS ||
+ !old_valid_dev(stat->dev) ||
+ !old_valid_dev(stat->rdev))
+ return -EOVERFLOW;
+
+ if (clear_user(ubuf, sizeof(*ubuf)))
+ return -EFAULT;
+
+ err = __put_user(old_encode_dev(stat->dev), &ubuf->st_dev);
+ err |= __put_user(stat->ino, &ubuf->st_ino);
+ err |= __put_user(stat->mode, &ubuf->st_mode);
+ err |= __put_user(stat->nlink, &ubuf->st_nlink);
+ err |= __put_user(high2lowuid(stat->uid), &ubuf->st_uid);
+ err |= __put_user(high2lowgid(stat->gid), &ubuf->st_gid);
+ err |= __put_user(old_encode_dev(stat->rdev), &ubuf->st_rdev);
+ err |= __put_user(stat->size, &ubuf->st_size);
+ err |= __put_user(stat->atime.tv_sec, &ubuf->st_atime);
+ err |= __put_user(stat->atime.tv_nsec, &ubuf->st_atime_nsec);
+ err |= __put_user(stat->mtime.tv_sec, &ubuf->st_mtime);
+ err |= __put_user(stat->mtime.tv_nsec, &ubuf->st_mtime_nsec);
+ err |= __put_user(stat->ctime.tv_sec, &ubuf->st_ctime);
+ err |= __put_user(stat->ctime.tv_nsec, &ubuf->st_ctime_nsec);
+ err |= __put_user(stat->blksize, &ubuf->st_blksize);
+ err |= __put_user(stat->blocks, &ubuf->st_blocks);
+ return err;
+}
+
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+
+
+static int
+get_page_prot (struct vm_area_struct *vma, unsigned long addr)
+{
+ int prot = 0;
+
+ if (!vma || vma->vm_start > addr)
+ return 0;
+
+ if (vma->vm_flags & VM_READ)
+ prot |= PROT_READ;
+ if (vma->vm_flags & VM_WRITE)
+ prot |= PROT_WRITE;
+ if (vma->vm_flags & VM_EXEC)
+ prot |= PROT_EXEC;
+ return prot;
+}
+
+/*
+ * Map a subpage by creating an anonymous page that contains the union of the old page and
+ * the subpage.
+ */
+static unsigned long
+mmap_subpage (struct file *file, unsigned long start, unsigned long end, int prot, int flags,
+ loff_t off)
+{
+ void *page = NULL;
+ struct inode *inode;
+ unsigned long ret = 0;
+ struct vm_area_struct *vma = find_vma(current->mm, start);
+ int old_prot = get_page_prot(vma, start);
+
+ DBG("mmap_subpage(file=%p,start=0x%lx,end=0x%lx,prot=%x,flags=%x,off=0x%llx)\n",
+ file, start, end, prot, flags, off);
+
+
+ /* Optimize the case where the old mmap and the new mmap are both anonymous */
+ if ((old_prot & PROT_WRITE) && (flags & MAP_ANONYMOUS) && !vma->vm_file) {
+ if (clear_user((void __user *) start, end - start)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ goto skip_mmap;
+ }
+
+ page = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ if (old_prot)
+ copy_from_user(page, (void __user *) PAGE_START(start), PAGE_SIZE);
+
+ down_write(&current->mm->mmap_sem);
+ {
+ ret = do_mmap(NULL, PAGE_START(start), PAGE_SIZE, prot | PROT_WRITE,
+ flags | MAP_FIXED | MAP_ANONYMOUS, 0);
+ }
+ up_write(&current->mm->mmap_sem);
+
+ if (IS_ERR((void *) ret))
+ goto out;
+
+ if (old_prot) {
+ /* copy back the old page contents. */
+ if (offset_in_page(start))
+ copy_to_user((void __user *) PAGE_START(start), page,
+ offset_in_page(start));
+ if (offset_in_page(end))
+ copy_to_user((void __user *) end, page + offset_in_page(end),
+ PAGE_SIZE - offset_in_page(end));
+ }
+
+ if (!(flags & MAP_ANONYMOUS)) {
+ /* read the file contents */
+ inode = file->f_dentry->d_inode;
+ if (!inode->i_fop || !file->f_op->read
+ || ((*file->f_op->read)(file, (char __user *) start, end - start, &off) < 0))
+ {
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+
+ skip_mmap:
+ if (!(prot & PROT_WRITE))
+ ret = sys_mprotect(PAGE_START(start), PAGE_SIZE, prot | old_prot);
+ out:
+ if (page)
+ free_page((unsigned long) page);
+ return ret;
+}
+
+/* SLAB cache for partial_page structures */
+kmem_cache_t *partial_page_cachep;
+
+/*
+ * init partial_page_list.
+ * return 0 means kmalloc fail.
+ */
+struct partial_page_list*
+ia32_init_pp_list(void)
+{
+ struct partial_page_list *p;
+
+ if ((p = kmalloc(sizeof(*p), GFP_KERNEL)) == NULL)
+ return p;
+ p->pp_head = NULL;
+ p->ppl_rb = RB_ROOT;
+ p->pp_hint = NULL;
+ atomic_set(&p->pp_count, 1);
+ return p;
+}
+
+/*
+ * Search for the partial page with @start in partial page list @ppl.
+ * If finds the partial page, return the found partial page.
+ * Else, return 0 and provide @pprev, @rb_link, @rb_parent to
+ * be used by later __ia32_insert_pp().
+ */
+static struct partial_page *
+__ia32_find_pp(struct partial_page_list *ppl, unsigned int start,
+ struct partial_page **pprev, struct rb_node ***rb_link,
+ struct rb_node **rb_parent)
+{
+ struct partial_page *pp;
+ struct rb_node **__rb_link, *__rb_parent, *rb_prev;
+
+ pp = ppl->pp_hint;
+ if (pp && pp->base == start)
+ return pp;
+
+ __rb_link = &ppl->ppl_rb.rb_node;
+ rb_prev = __rb_parent = NULL;
+
+ while (*__rb_link) {
+ __rb_parent = *__rb_link;
+ pp = rb_entry(__rb_parent, struct partial_page, pp_rb);
+
+ if (pp->base == start) {
+ ppl->pp_hint = pp;
+ return pp;
+ } else if (pp->base < start) {
+ rb_prev = __rb_parent;
+ __rb_link = &__rb_parent->rb_right;
+ } else {
+ __rb_link = &__rb_parent->rb_left;
+ }
+ }
+
+ *rb_link = __rb_link;
+ *rb_parent = __rb_parent;
+ *pprev = NULL;
+ if (rb_prev)
+ *pprev = rb_entry(rb_prev, struct partial_page, pp_rb);
+ return NULL;
+}
+
+/*
+ * insert @pp into @ppl.
+ */
+static void
+__ia32_insert_pp(struct partial_page_list *ppl, struct partial_page *pp,
+ struct partial_page *prev, struct rb_node **rb_link,
+ struct rb_node *rb_parent)
+{
+ /* link list */
+ if (prev) {
+ pp->next = prev->next;
+ prev->next = pp;
+ } else {
+ ppl->pp_head = pp;
+ if (rb_parent)
+ pp->next = rb_entry(rb_parent,
+ struct partial_page, pp_rb);
+ else
+ pp->next = NULL;
+ }
+
+ /* link rb */
+ rb_link_node(&pp->pp_rb, rb_parent, rb_link);
+ rb_insert_color(&pp->pp_rb, &ppl->ppl_rb);
+
+ ppl->pp_hint = pp;
+}
+
+/*
+ * delete @pp from partial page list @ppl.
+ */
+static void
+__ia32_delete_pp(struct partial_page_list *ppl, struct partial_page *pp,
+ struct partial_page *prev)
+{
+ if (prev) {
+ prev->next = pp->next;
+ if (ppl->pp_hint == pp)
+ ppl->pp_hint = prev;
+ } else {
+ ppl->pp_head = pp->next;
+ if (ppl->pp_hint == pp)
+ ppl->pp_hint = pp->next;
+ }
+ rb_erase(&pp->pp_rb, &ppl->ppl_rb);
+ kmem_cache_free(partial_page_cachep, pp);
+}
+
+static struct partial_page *
+__pp_prev(struct partial_page *pp)
+{
+ struct rb_node *prev = rb_prev(&pp->pp_rb);
+ if (prev)
+ return rb_entry(prev, struct partial_page, pp_rb);
+ else
+ return NULL;
+}
+
+/*
+ * Delete partial pages with address between @start and @end.
+ * @start and @end are page aligned.
+ */
+static void
+__ia32_delete_pp_range(unsigned int start, unsigned int end)
+{
+ struct partial_page *pp, *prev;
+ struct rb_node **rb_link, *rb_parent;
+
+ if (start >= end)
+ return;
+
+ pp = __ia32_find_pp(current->thread.ppl, start, &prev,
+ &rb_link, &rb_parent);
+ if (pp)
+ prev = __pp_prev(pp);
+ else {
+ if (prev)
+ pp = prev->next;
+ else
+ pp = current->thread.ppl->pp_head;
+ }
+
+ while (pp && pp->base < end) {
+ struct partial_page *tmp = pp->next;
+ __ia32_delete_pp(current->thread.ppl, pp, prev);
+ pp = tmp;
+ }
+}
+
+/*
+ * Set the range between @start and @end in bitmap.
+ * @start and @end should be IA32 page aligned and in the same IA64 page.
+ */
+static int
+__ia32_set_pp(unsigned int start, unsigned int end, int flags)
+{
+ struct partial_page *pp, *prev;
+ struct rb_node ** rb_link, *rb_parent;
+ unsigned int pstart, start_bit, end_bit, i;
+
+ pstart = PAGE_START(start);
+ start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
+ end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
+ if (end_bit == 0)
+ end_bit = PAGE_SIZE / IA32_PAGE_SIZE;
+ pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
+ &rb_link, &rb_parent);
+ if (pp) {
+ for (i = start_bit; i < end_bit; i++)
+ set_bit(i, &pp->bitmap);
+ /*
+ * Check: if this partial page has been set to a full page,
+ * then delete it.
+ */
+ if (find_first_zero_bit(&pp->bitmap, sizeof(pp->bitmap)*8) >=
+ PAGE_SIZE/IA32_PAGE_SIZE) {
+ __ia32_delete_pp(current->thread.ppl, pp, __pp_prev(pp));
+ }
+ return 0;
+ }
+
+ /*
+ * MAP_FIXED may lead to overlapping mmap.
+ * In this case, the requested mmap area may already mmaped as a full
+ * page. So check vma before adding a new partial page.
+ */
+ if (flags & MAP_FIXED) {
+ struct vm_area_struct *vma = find_vma(current->mm, pstart);
+ if (vma && vma->vm_start <= pstart)
+ return 0;
+ }
+
+ /* new a partial_page */
+ pp = kmem_cache_alloc(partial_page_cachep, GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+ pp->base = pstart;
+ pp->bitmap = 0;
+ for (i=start_bit; i<end_bit; i++)
+ set_bit(i, &(pp->bitmap));
+ pp->next = NULL;
+ __ia32_insert_pp(current->thread.ppl, pp, prev, rb_link, rb_parent);
+ return 0;
+}
+
+/*
+ * @start and @end should be IA32 page aligned, but don't need to be in the
+ * same IA64 page. Split @start and @end to make sure they're in the same IA64
+ * page, then call __ia32_set_pp().
+ */
+static void
+ia32_set_pp(unsigned int start, unsigned int end, int flags)
+{
+ down_write(&current->mm->mmap_sem);
+ if (flags & MAP_FIXED) {
+ /*
+ * MAP_FIXED may lead to overlapping mmap. When this happens,
+ * a series of complete IA64 pages results in deletion of
+ * old partial pages in that range.
+ */
+ __ia32_delete_pp_range(PAGE_ALIGN(start), PAGE_START(end));
+ }
+
+ if (end < PAGE_ALIGN(start)) {
+ __ia32_set_pp(start, end, flags);
+ } else {
+ if (offset_in_page(start))
+ __ia32_set_pp(start, PAGE_ALIGN(start), flags);
+ if (offset_in_page(end))
+ __ia32_set_pp(PAGE_START(end), end, flags);
+ }
+ up_write(&current->mm->mmap_sem);
+}
+
+/*
+ * Unset the range between @start and @end in bitmap.
+ * @start and @end should be IA32 page aligned and in the same IA64 page.
+ * After doing that, if the bitmap is 0, then free the page and return 1,
+ * else return 0;
+ * If not find the partial page in the list, then
+ * If the vma exists, then the full page is set to a partial page;
+ * Else return -ENOMEM.
+ */
+static int
+__ia32_unset_pp(unsigned int start, unsigned int end)
+{
+ struct partial_page *pp, *prev;
+ struct rb_node ** rb_link, *rb_parent;
+ unsigned int pstart, start_bit, end_bit, i;
+ struct vm_area_struct *vma;
+
+ pstart = PAGE_START(start);
+ start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
+ end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
+ if (end_bit == 0)
+ end_bit = PAGE_SIZE / IA32_PAGE_SIZE;
+
+ pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
+ &rb_link, &rb_parent);
+ if (pp) {
+ for (i = start_bit; i < end_bit; i++)
+ clear_bit(i, &pp->bitmap);
+ if (pp->bitmap == 0) {
+ __ia32_delete_pp(current->thread.ppl, pp, __pp_prev(pp));
+ return 1;
+ }
+ return 0;
+ }
+
+ vma = find_vma(current->mm, pstart);
+ if (!vma || vma->vm_start > pstart) {
+ return -ENOMEM;
+ }
+
+ /* new a partial_page */
+ pp = kmem_cache_alloc(partial_page_cachep, GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+ pp->base = pstart;
+ pp->bitmap = 0;
+ for (i = 0; i < start_bit; i++)
+ set_bit(i, &(pp->bitmap));
+ for (i = end_bit; i < PAGE_SIZE / IA32_PAGE_SIZE; i++)
+ set_bit(i, &(pp->bitmap));
+ pp->next = NULL;
+ __ia32_insert_pp(current->thread.ppl, pp, prev, rb_link, rb_parent);
+ return 0;
+}
+
+/*
+ * Delete pp between PAGE_ALIGN(start) and PAGE_START(end) by calling
+ * __ia32_delete_pp_range(). Unset possible partial pages by calling
+ * __ia32_unset_pp().
+ * The returned value see __ia32_unset_pp().
+ */
+static int
+ia32_unset_pp(unsigned int *startp, unsigned int *endp)
+{
+ unsigned int start = *startp, end = *endp;
+ int ret = 0;
+
+ down_write(&current->mm->mmap_sem);
+
+ __ia32_delete_pp_range(PAGE_ALIGN(start), PAGE_START(end));
+
+ if (end < PAGE_ALIGN(start)) {
+ ret = __ia32_unset_pp(start, end);
+ if (ret == 1) {
+ *startp = PAGE_START(start);
+ *endp = PAGE_ALIGN(end);
+ }
+ if (ret == 0) {
+ /* to shortcut sys_munmap() in sys32_munmap() */
+ *startp = PAGE_START(start);
+ *endp = PAGE_START(end);
+ }
+ } else {
+ if (offset_in_page(start)) {
+ ret = __ia32_unset_pp(start, PAGE_ALIGN(start));
+ if (ret == 1)
+ *startp = PAGE_START(start);
+ if (ret == 0)
+ *startp = PAGE_ALIGN(start);
+ if (ret < 0)
+ goto out;
+ }
+ if (offset_in_page(end)) {
+ ret = __ia32_unset_pp(PAGE_START(end), end);
+ if (ret == 1)
+ *endp = PAGE_ALIGN(end);
+ if (ret == 0)
+ *endp = PAGE_START(end);
+ }
+ }
+
+ out:
+ up_write(&current->mm->mmap_sem);
+ return ret;
+}
+
+/*
+ * Compare the range between @start and @end with bitmap in partial page.
+ * @start and @end should be IA32 page aligned and in the same IA64 page.
+ */
+static int
+__ia32_compare_pp(unsigned int start, unsigned int end)
+{
+ struct partial_page *pp, *prev;
+ struct rb_node ** rb_link, *rb_parent;
+ unsigned int pstart, start_bit, end_bit, size;
+ unsigned int first_bit, next_zero_bit; /* the first range in bitmap */
+
+ pstart = PAGE_START(start);
+
+ pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
+ &rb_link, &rb_parent);
+ if (!pp)
+ return 1;
+
+ start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
+ end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
+ size = sizeof(pp->bitmap) * 8;
+ first_bit = find_first_bit(&pp->bitmap, size);
+ next_zero_bit = find_next_zero_bit(&pp->bitmap, size, first_bit);
+ if ((start_bit < first_bit) || (end_bit > next_zero_bit)) {
+ /* exceeds the first range in bitmap */
+ return -ENOMEM;
+ } else if ((start_bit == first_bit) && (end_bit == next_zero_bit)) {
+ first_bit = find_next_bit(&pp->bitmap, size, next_zero_bit);
+ if ((next_zero_bit < first_bit) && (first_bit < size))
+ return 1; /* has next range */
+ else
+ return 0; /* no next range */
+ } else
+ return 1;
+}
+
+/*
+ * @start and @end should be IA32 page aligned, but don't need to be in the
+ * same IA64 page. Split @start and @end to make sure they're in the same IA64
+ * page, then call __ia32_compare_pp().
+ *
+ * Take this as example: the range is the 1st and 2nd 4K page.
+ * Return 0 if they fit bitmap exactly, i.e. bitmap = 00000011;
+ * Return 1 if the range doesn't cover whole bitmap, e.g. bitmap = 00001111;
+ * Return -ENOMEM if the range exceeds the bitmap, e.g. bitmap = 00000001 or
+ * bitmap = 00000101.
+ */
+static int
+ia32_compare_pp(unsigned int *startp, unsigned int *endp)
+{
+ unsigned int start = *startp, end = *endp;
+ int retval = 0;
+
+ down_write(&current->mm->mmap_sem);
+
+ if (end < PAGE_ALIGN(start)) {
+ retval = __ia32_compare_pp(start, end);
+ if (retval == 0) {
+ *startp = PAGE_START(start);
+ *endp = PAGE_ALIGN(end);
+ }
+ } else {
+ if (offset_in_page(start)) {
+ retval = __ia32_compare_pp(start,
+ PAGE_ALIGN(start));
+ if (retval == 0)
+ *startp = PAGE_START(start);
+ if (retval < 0)
+ goto out;
+ }
+ if (offset_in_page(end)) {
+ retval = __ia32_compare_pp(PAGE_START(end), end);
+ if (retval == 0)
+ *endp = PAGE_ALIGN(end);
+ }
+ }
+
+ out:
+ up_write(&current->mm->mmap_sem);
+ return retval;
+}
+
+static void
+__ia32_drop_pp_list(struct partial_page_list *ppl)
+{
+ struct partial_page *pp = ppl->pp_head;
+
+ while (pp) {
+ struct partial_page *next = pp->next;
+ kmem_cache_free(partial_page_cachep, pp);
+ pp = next;
+ }
+
+ kfree(ppl);
+}
+
+void
+ia32_drop_partial_page_list(struct task_struct *task)
+{
+ struct partial_page_list* ppl = task->thread.ppl;
+
+ if (ppl && atomic_dec_and_test(&ppl->pp_count))
+ __ia32_drop_pp_list(ppl);
+}
+
+/*
+ * Copy current->thread.ppl to ppl (already initialized).
+ */
+static int
+__ia32_copy_pp_list(struct partial_page_list *ppl)
+{
+ struct partial_page *pp, *tmp, *prev;
+ struct rb_node **rb_link, *rb_parent;
+
+ ppl->pp_head = NULL;
+ ppl->pp_hint = NULL;
+ ppl->ppl_rb = RB_ROOT;
+ rb_link = &ppl->ppl_rb.rb_node;
+ rb_parent = NULL;
+ prev = NULL;
+
+ for (pp = current->thread.ppl->pp_head; pp; pp = pp->next) {
+ tmp = kmem_cache_alloc(partial_page_cachep, GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+ *tmp = *pp;
+ __ia32_insert_pp(ppl, tmp, prev, rb_link, rb_parent);
+ prev = tmp;
+ rb_link = &tmp->pp_rb.rb_right;
+ rb_parent = &tmp->pp_rb;
+ }
+ return 0;
+}
+
+int
+ia32_copy_partial_page_list(struct task_struct *p, unsigned long clone_flags)
+{
+ int retval = 0;
+
+ if (clone_flags & CLONE_VM) {
+ atomic_inc(&current->thread.ppl->pp_count);
+ p->thread.ppl = current->thread.ppl;
+ } else {
+ p->thread.ppl = ia32_init_pp_list();
+ if (!p->thread.ppl)
+ return -ENOMEM;
+ down_write(&current->mm->mmap_sem);
+ {
+ retval = __ia32_copy_pp_list(p->thread.ppl);
+ }
+ up_write(&current->mm->mmap_sem);
+ }
+
+ return retval;
+}
+
+static unsigned long
+emulate_mmap (struct file *file, unsigned long start, unsigned long len, int prot, int flags,
+ loff_t off)
+{
+ unsigned long tmp, end, pend, pstart, ret, is_congruent, fudge = 0;
+ struct inode *inode;
+ loff_t poff;
+
+ end = start + len;
+ pstart = PAGE_START(start);
+ pend = PAGE_ALIGN(end);
+
+ if (flags & MAP_FIXED) {
+ ia32_set_pp((unsigned int)start, (unsigned int)end, flags);
+ if (start > pstart) {
+ if (flags & MAP_SHARED)
+ printk(KERN_INFO
+ "%s(%d): emulate_mmap() can't share head (addr=0x%lx)\n",
+ current->comm, current->pid, start);
+ ret = mmap_subpage(file, start, min(PAGE_ALIGN(start), end), prot, flags,
+ off);
+ if (IS_ERR((void *) ret))
+ return ret;
+ pstart += PAGE_SIZE;
+ if (pstart >= pend)
+ goto out; /* done */
+ }
+ if (end < pend) {
+ if (flags & MAP_SHARED)
+ printk(KERN_INFO
+ "%s(%d): emulate_mmap() can't share tail (end=0x%lx)\n",
+ current->comm, current->pid, end);
+ ret = mmap_subpage(file, max(start, PAGE_START(end)), end, prot, flags,
+ (off + len) - offset_in_page(end));
+ if (IS_ERR((void *) ret))
+ return ret;
+ pend -= PAGE_SIZE;
+ if (pstart >= pend)
+ goto out; /* done */
+ }
+ } else {
+ /*
+ * If a start address was specified, use it if the entire rounded out area
+ * is available.
+ */
+ if (start && !pstart)
+ fudge = 1; /* handle case of mapping to range (0,PAGE_SIZE) */
+ tmp = arch_get_unmapped_area(file, pstart - fudge, pend - pstart, 0, flags);
+ if (tmp != pstart) {
+ pstart = tmp;
+ start = pstart + offset_in_page(off); /* make start congruent with off */
+ end = start + len;
+ pend = PAGE_ALIGN(end);
+ }
+ }
+
+ poff = off + (pstart - start); /* note: (pstart - start) may be negative */
+ is_congruent = (flags & MAP_ANONYMOUS) || (offset_in_page(poff) == 0);
+
+ if ((flags & MAP_SHARED) && !is_congruent)
+ printk(KERN_INFO "%s(%d): emulate_mmap() can't share contents of incongruent mmap "
+ "(addr=0x%lx,off=0x%llx)\n", current->comm, current->pid, start, off);
+
+ DBG("mmap_body: mapping [0x%lx-0x%lx) %s with poff 0x%llx\n", pstart, pend,
+ is_congruent ? "congruent" : "not congruent", poff);
+
+ down_write(&current->mm->mmap_sem);
+ {
+ if (!(flags & MAP_ANONYMOUS) && is_congruent)
+ ret = do_mmap(file, pstart, pend - pstart, prot, flags | MAP_FIXED, poff);
+ else
+ ret = do_mmap(NULL, pstart, pend - pstart,
+ prot | ((flags & MAP_ANONYMOUS) ? 0 : PROT_WRITE),
+ flags | MAP_FIXED | MAP_ANONYMOUS, 0);
+ }
+ up_write(&current->mm->mmap_sem);
+
+ if (IS_ERR((void *) ret))
+ return ret;
+
+ if (!is_congruent) {
+ /* read the file contents */
+ inode = file->f_dentry->d_inode;
+ if (!inode->i_fop || !file->f_op->read
+ || ((*file->f_op->read)(file, (char __user *) pstart, pend - pstart, &poff)
+ < 0))
+ {
+ sys_munmap(pstart, pend - pstart);
+ return -EINVAL;
+ }
+ if (!(prot & PROT_WRITE) && sys_mprotect(pstart, pend - pstart, prot) < 0)
+ return -EINVAL;
+ }
+
+ if (!(flags & MAP_FIXED))
+ ia32_set_pp((unsigned int)start, (unsigned int)end, flags);
+out:
+ return start;
+}
+
+#endif /* PAGE_SHIFT > IA32_PAGE_SHIFT */
+
+static inline unsigned int
+get_prot32 (unsigned int prot)
+{
+ if (prot & PROT_WRITE)
+ /* on x86, PROT_WRITE implies PROT_READ which implies PROT_EEC */
+ prot |= PROT_READ | PROT_WRITE | PROT_EXEC;
+ else if (prot & (PROT_READ | PROT_EXEC))
+ /* on x86, there is no distinction between PROT_READ and PROT_EXEC */
+ prot |= (PROT_READ | PROT_EXEC);
+
+ return prot;
+}
+
+unsigned long
+ia32_do_mmap (struct file *file, unsigned long addr, unsigned long len, int prot, int flags,
+ loff_t offset)
+{
+ DBG("ia32_do_mmap(file=%p,addr=0x%lx,len=0x%lx,prot=%x,flags=%x,offset=0x%llx)\n",
+ file, addr, len, prot, flags, offset);
+
+ if (file && (!file->f_op || !file->f_op->mmap))
+ return -ENODEV;
+
+ len = IA32_PAGE_ALIGN(len);
+ if (len == 0)
+ return addr;
+
+ if (len > IA32_PAGE_OFFSET || addr > IA32_PAGE_OFFSET - len)
+ {
+ if (flags & MAP_FIXED)
+ return -ENOMEM;
+ else
+ return -EINVAL;
+ }
+
+ if (OFFSET4K(offset))
+ return -EINVAL;
+
+ prot = get_prot32(prot);
+
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+ down(&ia32_mmap_sem);
+ {
+ addr = emulate_mmap(file, addr, len, prot, flags, offset);
+ }
+ up(&ia32_mmap_sem);
+#else
+ down_write(&current->mm->mmap_sem);
+ {
+ addr = do_mmap(file, addr, len, prot, flags, offset);
+ }
+ up_write(&current->mm->mmap_sem);
+#endif
+ DBG("ia32_do_mmap: returning 0x%lx\n", addr);
+ return addr;
+}
+
+/*
+ * Linux/i386 didn't use to be able to handle more than 4 system call parameters, so these
+ * system calls used a memory block for parameter passing..
+ */
+
+struct mmap_arg_struct {
+ unsigned int addr;
+ unsigned int len;
+ unsigned int prot;
+ unsigned int flags;
+ unsigned int fd;
+ unsigned int offset;
+};
+
+asmlinkage long
+sys32_mmap (struct mmap_arg_struct __user *arg)
+{
+ struct mmap_arg_struct a;
+ struct file *file = NULL;
+ unsigned long addr;
+ int flags;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ return -EFAULT;
+
+ if (OFFSET4K(a.offset))
+ return -EINVAL;
+
+ flags = a.flags;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(a.fd);
+ if (!file)
+ return -EBADF;
+ }
+
+ addr = ia32_do_mmap(file, a.addr, a.len, a.prot, flags, a.offset);
+
+ if (file)
+ fput(file);
+ return addr;
+}
+
+asmlinkage long
+sys32_mmap2 (unsigned int addr, unsigned int len, unsigned int prot, unsigned int flags,
+ unsigned int fd, unsigned int pgoff)
+{
+ struct file *file = NULL;
+ unsigned long retval;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ return -EBADF;
+ }
+
+ retval = ia32_do_mmap(file, addr, len, prot, flags,
+ (unsigned long) pgoff << IA32_PAGE_SHIFT);
+
+ if (file)
+ fput(file);
+ return retval;
+}
+
+asmlinkage long
+sys32_munmap (unsigned int start, unsigned int len)
+{
+ unsigned int end = start + len;
+ long ret;
+
+#if PAGE_SHIFT <= IA32_PAGE_SHIFT
+ ret = sys_munmap(start, end - start);
+#else
+ if (OFFSET4K(start))
+ return -EINVAL;
+
+ end = IA32_PAGE_ALIGN(end);
+ if (start >= end)
+ return -EINVAL;
+
+ ret = ia32_unset_pp(&start, &end);
+ if (ret < 0)
+ return ret;
+
+ if (start >= end)
+ return 0;
+
+ down(&ia32_mmap_sem);
+ {
+ ret = sys_munmap(start, end - start);
+ }
+ up(&ia32_mmap_sem);
+#endif
+ return ret;
+}
+
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+
+/*
+ * When mprotect()ing a partial page, we set the permission to the union of the old
+ * settings and the new settings. In other words, it's only possible to make access to a
+ * partial page less restrictive.
+ */
+static long
+mprotect_subpage (unsigned long address, int new_prot)
+{
+ int old_prot;
+ struct vm_area_struct *vma;
+
+ if (new_prot == PROT_NONE)
+ return 0; /* optimize case where nothing changes... */
+ vma = find_vma(current->mm, address);
+ old_prot = get_page_prot(vma, address);
+ return sys_mprotect(address, PAGE_SIZE, new_prot | old_prot);
+}
+
+#endif /* PAGE_SHIFT > IA32_PAGE_SHIFT */
+
+asmlinkage long
+sys32_mprotect (unsigned int start, unsigned int len, int prot)
+{
+ unsigned int end = start + len;
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+ long retval = 0;
+#endif
+
+ prot = get_prot32(prot);
+
+#if PAGE_SHIFT <= IA32_PAGE_SHIFT
+ return sys_mprotect(start, end - start, prot);
+#else
+ if (OFFSET4K(start))
+ return -EINVAL;
+
+ end = IA32_PAGE_ALIGN(end);
+ if (end < start)
+ return -EINVAL;
+
+ retval = ia32_compare_pp(&start, &end);
+
+ if (retval < 0)
+ return retval;
+
+ down(&ia32_mmap_sem);
+ {
+ if (offset_in_page(start)) {
+ /* start address is 4KB aligned but not page aligned. */
+ retval = mprotect_subpage(PAGE_START(start), prot);
+ if (retval < 0)
+ goto out;
+
+ start = PAGE_ALIGN(start);
+ if (start >= end)
+ goto out; /* retval is already zero... */
+ }
+
+ if (offset_in_page(end)) {
+ /* end address is 4KB aligned but not page aligned. */
+ retval = mprotect_subpage(PAGE_START(end), prot);
+ if (retval < 0)
+ goto out;
+
+ end = PAGE_START(end);
+ }
+ retval = sys_mprotect(start, end - start, prot);
+ }
+ out:
+ up(&ia32_mmap_sem);
+ return retval;
+#endif
+}
+
+asmlinkage long
+sys32_mremap (unsigned int addr, unsigned int old_len, unsigned int new_len,
+ unsigned int flags, unsigned int new_addr)
+{
+ long ret;
+
+#if PAGE_SHIFT <= IA32_PAGE_SHIFT
+ ret = sys_mremap(addr, old_len, new_len, flags, new_addr);
+#else
+ unsigned int old_end, new_end;
+
+ if (OFFSET4K(addr))
+ return -EINVAL;
+
+ old_len = IA32_PAGE_ALIGN(old_len);
+ new_len = IA32_PAGE_ALIGN(new_len);
+ old_end = addr + old_len;
+ new_end = addr + new_len;
+
+ if (!new_len)
+ return -EINVAL;
+
+ if ((flags & MREMAP_FIXED) && (OFFSET4K(new_addr)))
+ return -EINVAL;
+
+ if (old_len >= new_len) {
+ ret = sys32_munmap(addr + new_len, old_len - new_len);
+ if (ret && old_len != new_len)
+ return ret;
+ ret = addr;
+ if (!(flags & MREMAP_FIXED) || (new_addr == addr))
+ return ret;
+ old_len = new_len;
+ }
+
+ addr = PAGE_START(addr);
+ old_len = PAGE_ALIGN(old_end) - addr;
+ new_len = PAGE_ALIGN(new_end) - addr;
+
+ down(&ia32_mmap_sem);
+ {
+ ret = sys_mremap(addr, old_len, new_len, flags, new_addr);
+ }
+ up(&ia32_mmap_sem);
+
+ if ((ret >= 0) && (old_len < new_len)) {
+ /* mremap expanded successfully */
+ ia32_set_pp(old_end, new_end, flags);
+ }
+#endif
+ return ret;
+}
+
+asmlinkage long
+sys32_pipe (int __user *fd)
+{
+ int retval;
+ int fds[2];
+
+ retval = do_pipe(fds);
+ if (retval)
+ goto out;
+ if (copy_to_user(fd, fds, sizeof(fds)))
+ retval = -EFAULT;
+ out:
+ return retval;
+}
+
+static inline long
+get_tv32 (struct timeval *o, struct compat_timeval __user *i)
+{
+ return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
+ (__get_user(o->tv_sec, &i->tv_sec) | __get_user(o->tv_usec, &i->tv_usec)));
+}
+
+static inline long
+put_tv32 (struct compat_timeval __user *o, struct timeval *i)
+{
+ return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
+ (__put_user(i->tv_sec, &o->tv_sec) | __put_user(i->tv_usec, &o->tv_usec)));
+}
+
+asmlinkage unsigned long
+sys32_alarm (unsigned int seconds)
+{
+ struct itimerval it_new, it_old;
+ unsigned int oldalarm;
+
+ it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0;
+ it_new.it_value.tv_sec = seconds;
+ it_new.it_value.tv_usec = 0;
+ do_setitimer(ITIMER_REAL, &it_new, &it_old);
+ oldalarm = it_old.it_value.tv_sec;
+ /* ehhh.. We can't return 0 if we have an alarm pending.. */
+ /* And we'd better return too much than too little anyway */
+ if (it_old.it_value.tv_usec)
+ oldalarm++;
+ return oldalarm;
+}
+
+/* Translations due to time_t size differences. Which affects all
+ sorts of things, like timeval and itimerval. */
+
+extern struct timezone sys_tz;
+
+asmlinkage long
+sys32_gettimeofday (struct compat_timeval __user *tv, struct timezone __user *tz)
+{
+ if (tv) {
+ struct timeval ktv;
+ do_gettimeofday(&ktv);
+ if (put_tv32(tv, &ktv))
+ return -EFAULT;
+ }
+ if (tz) {
+ if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
+ return -EFAULT;
+ }
+ return 0;
+}
+
+asmlinkage long
+sys32_settimeofday (struct compat_timeval __user *tv, struct timezone __user *tz)
+{
+ struct timeval ktv;
+ struct timespec kts;
+ struct timezone ktz;
+
+ if (tv) {
+ if (get_tv32(&ktv, tv))
+ return -EFAULT;
+ kts.tv_sec = ktv.tv_sec;
+ kts.tv_nsec = ktv.tv_usec * 1000;
+ }
+ if (tz) {
+ if (copy_from_user(&ktz, tz, sizeof(ktz)))
+ return -EFAULT;
+ }
+
+ return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
+}
+
+struct getdents32_callback {
+ struct compat_dirent __user *current_dir;
+ struct compat_dirent __user *previous;
+ int count;
+ int error;
+};
+
+struct readdir32_callback {
+ struct old_linux32_dirent __user * dirent;
+ int count;
+};
+
+static int
+filldir32 (void *__buf, const char *name, int namlen, loff_t offset, ino_t ino,
+ unsigned int d_type)
+{
+ struct compat_dirent __user * dirent;
+ struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
+ int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4);
+
+ buf->error = -EINVAL; /* only used if we fail.. */
+ if (reclen > buf->count)
+ return -EINVAL;
+ buf->error = -EFAULT; /* only used if we fail.. */
+ dirent = buf->previous;
+ if (dirent)
+ if (put_user(offset, &dirent->d_off))
+ return -EFAULT;
+ dirent = buf->current_dir;
+ buf->previous = dirent;
+ if (put_user(ino, &dirent->d_ino)
+ || put_user(reclen, &dirent->d_reclen)
+ || copy_to_user(dirent->d_name, name, namlen)
+ || put_user(0, dirent->d_name + namlen))
+ return -EFAULT;
+ dirent = (struct compat_dirent __user *) ((char __user *) dirent + reclen);
+ buf->current_dir = dirent;
+ buf->count -= reclen;
+ return 0;
+}
+
+asmlinkage long
+sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned int count)
+{
+ struct file * file;
+ struct compat_dirent __user * lastdirent;
+ struct getdents32_callback buf;
+ int error;
+
+ error = -EBADF;
+ file = fget(fd);
+ if (!file)
+ goto out;
+
+ buf.current_dir = dirent;
+ buf.previous = NULL;
+ buf.count = count;
+ buf.error = 0;
+
+ error = vfs_readdir(file, filldir32, &buf);
+ if (error < 0)
+ goto out_putf;
+ error = buf.error;
+ lastdirent = buf.previous;
+ if (lastdirent) {
+ error = -EINVAL;
+ if (put_user(file->f_pos, &lastdirent->d_off))
+ goto out_putf;
+ error = count - buf.count;
+ }
+
+out_putf:
+ fput(file);
+out:
+ return error;
+}
+
+static int
+fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, ino_t ino,
+ unsigned int d_type)
+{
+ struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
+ struct old_linux32_dirent __user * dirent;
+
+ if (buf->count)
+ return -EINVAL;
+ buf->count++;
+ dirent = buf->dirent;
+ if (put_user(ino, &dirent->d_ino)
+ || put_user(offset, &dirent->d_offset)
+ || put_user(namlen, &dirent->d_namlen)
+ || copy_to_user(dirent->d_name, name, namlen)
+ || put_user(0, dirent->d_name + namlen))
+ return -EFAULT;
+ return 0;
+}
+
+asmlinkage long
+sys32_readdir (unsigned int fd, void __user *dirent, unsigned int count)
+{
+ int error;
+ struct file * file;
+ struct readdir32_callback buf;
+
+ error = -EBADF;
+ file = fget(fd);
+ if (!file)
+ goto out;
+
+ buf.count = 0;
+ buf.dirent = dirent;
+
+ error = vfs_readdir(file, fillonedir32, &buf);
+ if (error >= 0)
+ error = buf.count;
+ fput(file);
+out:
+ return error;
+}
+
+struct sel_arg_struct {
+ unsigned int n;
+ unsigned int inp;
+ unsigned int outp;
+ unsigned int exp;
+ unsigned int tvp;
+};
+
+asmlinkage long
+sys32_old_select (struct sel_arg_struct __user *arg)
+{
+ struct sel_arg_struct a;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ return -EFAULT;
+ return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
+ compat_ptr(a.exp), compat_ptr(a.tvp));
+}
+
+#define SEMOP 1
+#define SEMGET 2
+#define SEMCTL 3
+#define SEMTIMEDOP 4
+#define MSGSND 11
+#define MSGRCV 12
+#define MSGGET 13
+#define MSGCTL 14
+#define SHMAT 21
+#define SHMDT 22
+#define SHMGET 23
+#define SHMCTL 24
+
+asmlinkage long
+sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+{
+ int version;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ switch (call) {
+ case SEMTIMEDOP:
+ if (fifth)
+ return compat_sys_semtimedop(first, compat_ptr(ptr),
+ second, compat_ptr(fifth));
+ /* else fall through for normal semop() */
+ case SEMOP:
+ /* struct sembuf is the same on 32 and 64bit :)) */
+ return sys_semtimedop(first, compat_ptr(ptr), second,
+ NULL);
+ case SEMGET:
+ return sys_semget(first, second, third);
+ case SEMCTL:
+ return compat_sys_semctl(first, second, third, compat_ptr(ptr));
+
+ case MSGSND:
+ return compat_sys_msgsnd(first, second, third, compat_ptr(ptr));
+ case MSGRCV:
+ return compat_sys_msgrcv(first, second, fifth, third, version, compat_ptr(ptr));
+ case MSGGET:
+ return sys_msgget((key_t) first, second);
+ case MSGCTL:
+ return compat_sys_msgctl(first, second, compat_ptr(ptr));
+
+ case SHMAT:
+ return compat_sys_shmat(first, second, third, version, compat_ptr(ptr));
+ break;
+ case SHMDT:
+ return sys_shmdt(compat_ptr(ptr));
+ case SHMGET:
+ return sys_shmget(first, (unsigned)second, third);
+ case SHMCTL:
+ return compat_sys_shmctl(first, second, compat_ptr(ptr));
+
+ default:
+ return -ENOSYS;
+ }
+ return -EINVAL;
+}
+
+asmlinkage long
+compat_sys_wait4 (compat_pid_t pid, compat_uint_t * stat_addr, int options,
+ struct compat_rusage *ru);
+
+asmlinkage long
+sys32_waitpid (int pid, unsigned int *stat_addr, int options)
+{
+ return compat_sys_wait4(pid, stat_addr, options, NULL);
+}
+
+static unsigned int
+ia32_peek (struct task_struct *child, unsigned long addr, unsigned int *val)
+{
+ size_t copied;
+ unsigned int ret;
+
+ copied = access_process_vm(child, addr, val, sizeof(*val), 0);
+ return (copied != sizeof(ret)) ? -EIO : 0;
+}
+
+static unsigned int
+ia32_poke (struct task_struct *child, unsigned long addr, unsigned int val)
+{
+
+ if (access_process_vm(child, addr, &val, sizeof(val), 1) != sizeof(val))
+ return -EIO;
+ return 0;
+}
+
+/*
+ * The order in which registers are stored in the ptrace regs structure
+ */
+#define PT_EBX 0
+#define PT_ECX 1
+#define PT_EDX 2
+#define PT_ESI 3
+#define PT_EDI 4
+#define PT_EBP 5
+#define PT_EAX 6
+#define PT_DS 7
+#define PT_ES 8
+#define PT_FS 9
+#define PT_GS 10
+#define PT_ORIG_EAX 11
+#define PT_EIP 12
+#define PT_CS 13
+#define PT_EFL 14
+#define PT_UESP 15
+#define PT_SS 16
+
+static unsigned int
+getreg (struct task_struct *child, int regno)
+{
+ struct pt_regs *child_regs;
+
+ child_regs = ia64_task_regs(child);
+ switch (regno / sizeof(int)) {
+ case PT_EBX: return child_regs->r11;
+ case PT_ECX: return child_regs->r9;
+ case PT_EDX: return child_regs->r10;
+ case PT_ESI: return child_regs->r14;
+ case PT_EDI: return child_regs->r15;
+ case PT_EBP: return child_regs->r13;
+ case PT_EAX: return child_regs->r8;
+ case PT_ORIG_EAX: return child_regs->r1; /* see dispatch_to_ia32_handler() */
+ case PT_EIP: return child_regs->cr_iip;
+ case PT_UESP: return child_regs->r12;
+ case PT_EFL: return child->thread.eflag;
+ case PT_DS: case PT_ES: case PT_FS: case PT_GS: case PT_SS:
+ return __USER_DS;
+ case PT_CS: return __USER_CS;
+ default:
+ printk(KERN_ERR "ia32.getreg(): unknown register %d\n", regno);
+ break;
+ }
+ return 0;
+}
+
+static void
+putreg (struct task_struct *child, int regno, unsigned int value)
+{
+ struct pt_regs *child_regs;
+
+ child_regs = ia64_task_regs(child);
+ switch (regno / sizeof(int)) {
+ case PT_EBX: child_regs->r11 = value; break;
+ case PT_ECX: child_regs->r9 = value; break;
+ case PT_EDX: child_regs->r10 = value; break;
+ case PT_ESI: child_regs->r14 = value; break;
+ case PT_EDI: child_regs->r15 = value; break;
+ case PT_EBP: child_regs->r13 = value; break;
+ case PT_EAX: child_regs->r8 = value; break;
+ case PT_ORIG_EAX: child_regs->r1 = value; break;
+ case PT_EIP: child_regs->cr_iip = value; break;
+ case PT_UESP: child_regs->r12 = value; break;
+ case PT_EFL: child->thread.eflag = value; break;
+ case PT_DS: case PT_ES: case PT_FS: case PT_GS: case PT_SS:
+ if (value != __USER_DS)
+ printk(KERN_ERR
+ "ia32.putreg: attempt to set invalid segment register %d = %x\n",
+ regno, value);
+ break;
+ case PT_CS:
+ if (value != __USER_CS)
+ printk(KERN_ERR
+ "ia32.putreg: attempt to to set invalid segment register %d = %x\n",
+ regno, value);
+ break;
+ default:
+ printk(KERN_ERR "ia32.putreg: unknown register %d\n", regno);
+ break;
+ }
+}
+
+static void
+put_fpreg (int regno, struct _fpreg_ia32 __user *reg, struct pt_regs *ptp,
+ struct switch_stack *swp, int tos)
+{
+ struct _fpreg_ia32 *f;
+ char buf[32];
+
+ f = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
+ if ((regno += tos) >= 8)
+ regno -= 8;
+ switch (regno) {
+ case 0:
+ ia64f2ia32f(f, &ptp->f8);
+ break;
+ case 1:
+ ia64f2ia32f(f, &ptp->f9);
+ break;
+ case 2:
+ ia64f2ia32f(f, &ptp->f10);
+ break;
+ case 3:
+ ia64f2ia32f(f, &ptp->f11);
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ ia64f2ia32f(f, &swp->f12 + (regno - 4));
+ break;
+ }
+ copy_to_user(reg, f, sizeof(*reg));
+}
+
+static void
+get_fpreg (int regno, struct _fpreg_ia32 __user *reg, struct pt_regs *ptp,
+ struct switch_stack *swp, int tos)
+{
+
+ if ((regno += tos) >= 8)
+ regno -= 8;
+ switch (regno) {
+ case 0:
+ copy_from_user(&ptp->f8, reg, sizeof(*reg));
+ break;
+ case 1:
+ copy_from_user(&ptp->f9, reg, sizeof(*reg));
+ break;
+ case 2:
+ copy_from_user(&ptp->f10, reg, sizeof(*reg));
+ break;
+ case 3:
+ copy_from_user(&ptp->f11, reg, sizeof(*reg));
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ copy_from_user(&swp->f12 + (regno - 4), reg, sizeof(*reg));
+ break;
+ }
+ return;
+}
+
+int
+save_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct __user *save)
+{
+ struct switch_stack *swp;
+ struct pt_regs *ptp;
+ int i, tos;
+
+ if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
+ return -EFAULT;
+
+ __put_user(tsk->thread.fcr & 0xffff, &save->cwd);
+ __put_user(tsk->thread.fsr & 0xffff, &save->swd);
+ __put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
+ __put_user(tsk->thread.fir, &save->fip);
+ __put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
+ __put_user(tsk->thread.fdr, &save->foo);
+ __put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
+
+ /*
+ * Stack frames start with 16-bytes of temp space
+ */
+ swp = (struct switch_stack *)(tsk->thread.ksp + 16);
+ ptp = ia64_task_regs(tsk);
+ tos = (tsk->thread.fsr >> 11) & 7;
+ for (i = 0; i < 8; i++)
+ put_fpreg(i, &save->st_space[i], ptp, swp, tos);
+ return 0;
+}
+
+static int
+restore_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct __user *save)
+{
+ struct switch_stack *swp;
+ struct pt_regs *ptp;
+ int i, tos;
+ unsigned int fsrlo, fsrhi, num32;
+
+ if (!access_ok(VERIFY_READ, save, sizeof(*save)))
+ return(-EFAULT);
+
+ __get_user(num32, (unsigned int __user *)&save->cwd);
+ tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
+ __get_user(fsrlo, (unsigned int __user *)&save->swd);
+ __get_user(fsrhi, (unsigned int __user *)&save->twd);
+ num32 = (fsrhi << 16) | fsrlo;
+ tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
+ __get_user(num32, (unsigned int __user *)&save->fip);
+ tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
+ __get_user(num32, (unsigned int __user *)&save->foo);
+ tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
+
+ /*
+ * Stack frames start with 16-bytes of temp space
+ */
+ swp = (struct switch_stack *)(tsk->thread.ksp + 16);
+ ptp = ia64_task_regs(tsk);
+ tos = (tsk->thread.fsr >> 11) & 7;
+ for (i = 0; i < 8; i++)
+ get_fpreg(i, &save->st_space[i], ptp, swp, tos);
+ return 0;
+}
+
+int
+save_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __user *save)
+{
+ struct switch_stack *swp;
+ struct pt_regs *ptp;
+ int i, tos;
+ unsigned long mxcsr=0;
+ unsigned long num128[2];
+
+ if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
+ return -EFAULT;
+
+ __put_user(tsk->thread.fcr & 0xffff, &save->cwd);
+ __put_user(tsk->thread.fsr & 0xffff, &save->swd);
+ __put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
+ __put_user(tsk->thread.fir, &save->fip);
+ __put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
+ __put_user(tsk->thread.fdr, &save->foo);
+ __put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
+
+ /*
+ * Stack frames start with 16-bytes of temp space
+ */
+ swp = (struct switch_stack *)(tsk->thread.ksp + 16);
+ ptp = ia64_task_regs(tsk);
+ tos = (tsk->thread.fsr >> 11) & 7;
+ for (i = 0; i < 8; i++)
+ put_fpreg(i, (struct _fpreg_ia32 __user *)&save->st_space[4*i], ptp, swp, tos);
+
+ mxcsr = ((tsk->thread.fcr>>32) & 0xff80) | ((tsk->thread.fsr>>32) & 0x3f);
+ __put_user(mxcsr & 0xffff, &save->mxcsr);
+ for (i = 0; i < 8; i++) {
+ memcpy(&(num128[0]), &(swp->f16) + i*2, sizeof(unsigned long));
+ memcpy(&(num128[1]), &(swp->f17) + i*2, sizeof(unsigned long));
+ copy_to_user(&save->xmm_space[0] + 4*i, num128, sizeof(struct _xmmreg_ia32));
+ }
+ return 0;
+}
+
+static int
+restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __user *save)
+{
+ struct switch_stack *swp;
+ struct pt_regs *ptp;
+ int i, tos;
+ unsigned int fsrlo, fsrhi, num32;
+ int mxcsr;
+ unsigned long num64;
+ unsigned long num128[2];
+
+ if (!access_ok(VERIFY_READ, save, sizeof(*save)))
+ return(-EFAULT);
+
+ __get_user(num32, (unsigned int __user *)&save->cwd);
+ tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
+ __get_user(fsrlo, (unsigned int __user *)&save->swd);
+ __get_user(fsrhi, (unsigned int __user *)&save->twd);
+ num32 = (fsrhi << 16) | fsrlo;
+ tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
+ __get_user(num32, (unsigned int __user *)&save->fip);
+ tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
+ __get_user(num32, (unsigned int __user *)&save->foo);
+ tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
+
+ /*
+ * Stack frames start with 16-bytes of temp space
+ */
+ swp = (struct switch_stack *)(tsk->thread.ksp + 16);
+ ptp = ia64_task_regs(tsk);
+ tos = (tsk->thread.fsr >> 11) & 7;
+ for (i = 0; i < 8; i++)
+ get_fpreg(i, (struct _fpreg_ia32 __user *)&save->st_space[4*i], ptp, swp, tos);
+
+ __get_user(mxcsr, (unsigned int __user *)&save->mxcsr);
+ num64 = mxcsr & 0xff10;
+ tsk->thread.fcr = (tsk->thread.fcr & (~0xff1000000000UL)) | (num64<<32);
+ num64 = mxcsr & 0x3f;
+ tsk->thread.fsr = (tsk->thread.fsr & (~0x3f00000000UL)) | (num64<<32);
+
+ for (i = 0; i < 8; i++) {
+ copy_from_user(num128, &save->xmm_space[0] + 4*i, sizeof(struct _xmmreg_ia32));
+ memcpy(&(swp->f16) + i*2, &(num128[0]), sizeof(unsigned long));
+ memcpy(&(swp->f17) + i*2, &(num128[1]), sizeof(unsigned long));
+ }
+ return 0;
+}
+
+asmlinkage long
+sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data)
+{
+ struct task_struct *child;
+ unsigned int value, tmp;
+ long i, ret;
+
+ lock_kernel();
+ if (request == PTRACE_TRACEME) {
+ ret = sys_ptrace(request, pid, addr, data);
+ goto out;
+ }
+
+ ret = -ESRCH;
+ read_lock(&tasklist_lock);
+ child = find_task_by_pid(pid);
+ if (child)
+ get_task_struct(child);
+ read_unlock(&tasklist_lock);
+ if (!child)
+ goto out;
+ ret = -EPERM;
+ if (pid == 1) /* no messing around with init! */
+ goto out_tsk;
+
+ if (request == PTRACE_ATTACH) {
+ ret = sys_ptrace(request, pid, addr, data);
+ goto out_tsk;
+ }
+
+ ret = ptrace_check_attach(child, request == PTRACE_KILL);
+ if (ret < 0)
+ goto out_tsk;
+
+ switch (request) {
+ case PTRACE_PEEKTEXT:
+ case PTRACE_PEEKDATA: /* read word at location addr */
+ ret = ia32_peek(child, addr, &value);
+ if (ret == 0)
+ ret = put_user(value, (unsigned int __user *) compat_ptr(data));
+ else
+ ret = -EIO;
+ goto out_tsk;
+
+ case PTRACE_POKETEXT:
+ case PTRACE_POKEDATA: /* write the word at location addr */
+ ret = ia32_poke(child, addr, data);
+ goto out_tsk;
+
+ case PTRACE_PEEKUSR: /* read word at addr in USER area */
+ ret = -EIO;
+ if ((addr & 3) || addr > 17*sizeof(int))
+ break;
+
+ tmp = getreg(child, addr);
+ if (!put_user(tmp, (unsigned int __user *) compat_ptr(data)))
+ ret = 0;
+ break;
+
+ case PTRACE_POKEUSR: /* write word at addr in USER area */
+ ret = -EIO;
+ if ((addr & 3) || addr > 17*sizeof(int))
+ break;
+
+ putreg(child, addr, data);
+ ret = 0;
+ break;
+
+ case IA32_PTRACE_GETREGS:
+ if (!access_ok(VERIFY_WRITE, compat_ptr(data), 17*sizeof(int))) {
+ ret = -EIO;
+ break;
+ }
+ for (i = 0; i < (int) (17*sizeof(int)); i += sizeof(int) ) {
+ put_user(getreg(child, i), (unsigned int __user *) compat_ptr(data));
+ data += sizeof(int);
+ }
+ ret = 0;
+ break;
+
+ case IA32_PTRACE_SETREGS:
+ if (!access_ok(VERIFY_READ, compat_ptr(data), 17*sizeof(int))) {
+ ret = -EIO;
+ break;
+ }
+ for (i = 0; i < (int) (17*sizeof(int)); i += sizeof(int) ) {
+ get_user(tmp, (unsigned int __user *) compat_ptr(data));
+ putreg(child, i, tmp);
+ data += sizeof(int);
+ }
+ ret = 0;
+ break;
+
+ case IA32_PTRACE_GETFPREGS:
+ ret = save_ia32_fpstate(child, (struct ia32_user_i387_struct __user *)
+ compat_ptr(data));
+ break;
+
+ case IA32_PTRACE_GETFPXREGS:
+ ret = save_ia32_fpxstate(child, (struct ia32_user_fxsr_struct __user *)
+ compat_ptr(data));
+ break;
+
+ case IA32_PTRACE_SETFPREGS:
+ ret = restore_ia32_fpstate(child, (struct ia32_user_i387_struct __user *)
+ compat_ptr(data));
+ break;
+
+ case IA32_PTRACE_SETFPXREGS:
+ ret = restore_ia32_fpxstate(child, (struct ia32_user_fxsr_struct __user *)
+ compat_ptr(data));
+ break;
+
+ case PTRACE_GETEVENTMSG:
+ ret = put_user(child->ptrace_message, (unsigned int __user *) compat_ptr(data));
+ break;
+
+ case PTRACE_SYSCALL: /* continue, stop after next syscall */
+ case PTRACE_CONT: /* restart after signal. */
+ case PTRACE_KILL:
+ case PTRACE_SINGLESTEP: /* execute chile for one instruction */
+ case PTRACE_DETACH: /* detach a process */
+ ret = sys_ptrace(request, pid, addr, data);
+ break;
+
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+
+ }
+ out_tsk:
+ put_task_struct(child);
+ out:
+ unlock_kernel();
+ return ret;
+}
+
+typedef struct {
+ unsigned int ss_sp;
+ unsigned int ss_flags;
+ unsigned int ss_size;
+} ia32_stack_t;
+
+asmlinkage long
+sys32_sigaltstack (ia32_stack_t __user *uss32, ia32_stack_t __user *uoss32,
+ long arg2, long arg3, long arg4, long arg5, long arg6,
+ long arg7, struct pt_regs pt)
+{
+ stack_t uss, uoss;
+ ia32_stack_t buf32;
+ int ret;
+ mm_segment_t old_fs = get_fs();
+
+ if (uss32) {
+ if (copy_from_user(&buf32, uss32, sizeof(ia32_stack_t)))
+ return -EFAULT;
+ uss.ss_sp = (void __user *) (long) buf32.ss_sp;
+ uss.ss_flags = buf32.ss_flags;
+ /* MINSIGSTKSZ is different for ia32 vs ia64. We lie here to pass the
+ check and set it to the user requested value later */
+ if ((buf32.ss_flags != SS_DISABLE) && (buf32.ss_size < MINSIGSTKSZ_IA32)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ uss.ss_size = MINSIGSTKSZ;
+ }
+ set_fs(KERNEL_DS);
+ ret = do_sigaltstack(uss32 ? (stack_t __user *) &uss : NULL,
+ (stack_t __user *) &uoss, pt.r12);
+ current->sas_ss_size = buf32.ss_size;
+ set_fs(old_fs);
+out:
+ if (ret < 0)
+ return(ret);
+ if (uoss32) {
+ buf32.ss_sp = (long __user) uoss.ss_sp;
+ buf32.ss_flags = uoss.ss_flags;
+ buf32.ss_size = uoss.ss_size;
+ if (copy_to_user(uoss32, &buf32, sizeof(ia32_stack_t)))
+ return -EFAULT;
+ }
+ return ret;
+}
+
+asmlinkage int
+sys32_pause (void)
+{
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ return -ERESTARTNOHAND;
+}
+
+asmlinkage int
+sys32_msync (unsigned int start, unsigned int len, int flags)
+{
+ unsigned int addr;
+
+ if (OFFSET4K(start))
+ return -EINVAL;
+ addr = PAGE_START(start);
+ return sys_msync(addr, len + (start - addr), flags);
+}
+
+struct sysctl32 {
+ unsigned int name;
+ int nlen;
+ unsigned int oldval;
+ unsigned int oldlenp;
+ unsigned int newval;
+ unsigned int newlen;
+ unsigned int __unused[4];
+};
+
+#ifdef CONFIG_SYSCTL
+asmlinkage long
+sys32_sysctl (struct sysctl32 __user *args)
+{
+ struct sysctl32 a32;
+ mm_segment_t old_fs = get_fs ();
+ void __user *oldvalp, *newvalp;
+ size_t oldlen;
+ int __user *namep;
+ long ret;
+
+ if (copy_from_user(&a32, args, sizeof(a32)))
+ return -EFAULT;
+
+ /*
+ * We need to pre-validate these because we have to disable address checking
+ * before calling do_sysctl() because of OLDLEN but we can't run the risk of the
+ * user specifying bad addresses here. Well, since we're dealing with 32 bit
+ * addresses, we KNOW that access_ok() will always succeed, so this is an
+ * expensive NOP, but so what...
+ */
+ namep = (int __user *) compat_ptr(a32.name);
+ oldvalp = compat_ptr(a32.oldval);
+ newvalp = compat_ptr(a32.newval);
+
+ if ((oldvalp && get_user(oldlen, (int __user *) compat_ptr(a32.oldlenp)))
+ || !access_ok(VERIFY_WRITE, namep, 0)
+ || !access_ok(VERIFY_WRITE, oldvalp, 0)
+ || !access_ok(VERIFY_WRITE, newvalp, 0))
+ return -EFAULT;
+
+ set_fs(KERNEL_DS);
+ lock_kernel();
+ ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *) &oldlen,
+ newvalp, (size_t) a32.newlen);
+ unlock_kernel();
+ set_fs(old_fs);
+
+ if (oldvalp && put_user (oldlen, (int __user *) compat_ptr(a32.oldlenp)))
+ return -EFAULT;
+
+ return ret;
+}
+#endif
+
+asmlinkage long
+sys32_newuname (struct new_utsname __user *name)
+{
+ int ret = sys_newuname(name);
+
+ if (!ret)
+ if (copy_to_user(name->machine, "i686\0\0\0", 8))
+ ret = -EFAULT;
+ return ret;
+}
+
+asmlinkage long
+sys32_getresuid16 (u16 __user *ruid, u16 __user *euid, u16 __user *suid)
+{
+ uid_t a, b, c;
+ int ret;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ ret = sys_getresuid((uid_t __user *) &a, (uid_t __user *) &b, (uid_t __user *) &c);
+ set_fs(old_fs);
+
+ if (put_user(a, ruid) || put_user(b, euid) || put_user(c, suid))
+ return -EFAULT;
+ return ret;
+}
+
+asmlinkage long
+sys32_getresgid16 (u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
+{
+ gid_t a, b, c;
+ int ret;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ ret = sys_getresgid((gid_t __user *) &a, (gid_t __user *) &b, (gid_t __user *) &c);
+ set_fs(old_fs);
+
+ if (ret)
+ return ret;
+
+ return put_user(a, rgid) | put_user(b, egid) | put_user(c, sgid);
+}
+
+asmlinkage long
+sys32_lseek (unsigned int fd, int offset, unsigned int whence)
+{
+ /* Sign-extension of "offset" is important here... */
+ return sys_lseek(fd, offset, whence);
+}
+
+static int
+groups16_to_user(short __user *grouplist, struct group_info *group_info)
+{
+ int i;
+ short group;
+
+ for (i = 0; i < group_info->ngroups; i++) {
+ group = (short)GROUP_AT(group_info, i);
+ if (put_user(group, grouplist+i))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int
+groups16_from_user(struct group_info *group_info, short __user *grouplist)
+{
+ int i;
+ short group;
+
+ for (i = 0; i < group_info->ngroups; i++) {
+ if (get_user(group, grouplist+i))
+ return -EFAULT;
+ GROUP_AT(group_info, i) = (gid_t)group;
+ }
+
+ return 0;
+}
+
+asmlinkage long
+sys32_getgroups16 (int gidsetsize, short __user *grouplist)
+{
+ int i;
+
+ if (gidsetsize < 0)
+ return -EINVAL;
+
+ get_group_info(current->group_info);
+ i = current->group_info->ngroups;
+ if (gidsetsize) {
+ if (i > gidsetsize) {
+ i = -EINVAL;
+ goto out;
+ }
+ if (groups16_to_user(grouplist, current->group_info)) {
+ i = -EFAULT;
+ goto out;
+ }
+ }
+out:
+ put_group_info(current->group_info);
+ return i;
+}
+
+asmlinkage long
+sys32_setgroups16 (int gidsetsize, short __user *grouplist)
+{
+ struct group_info *group_info;
+ int retval;
+
+ if (!capable(CAP_SETGID))
+ return -EPERM;
+ if ((unsigned)gidsetsize > NGROUPS_MAX)
+ return -EINVAL;
+
+ group_info = groups_alloc(gidsetsize);
+ if (!group_info)
+ return -ENOMEM;
+ retval = groups16_from_user(group_info, grouplist);
+ if (retval) {
+ put_group_info(group_info);
+ return retval;
+ }
+
+ retval = set_current_groups(group_info);
+ put_group_info(group_info);
+
+ return retval;
+}
+
+asmlinkage long
+sys32_truncate64 (unsigned int path, unsigned int len_lo, unsigned int len_hi)
+{
+ return sys_truncate(compat_ptr(path), ((unsigned long) len_hi << 32) | len_lo);
+}
+
+asmlinkage long
+sys32_ftruncate64 (int fd, unsigned int len_lo, unsigned int len_hi)
+{
+ return sys_ftruncate(fd, ((unsigned long) len_hi << 32) | len_lo);
+}
+
+static int
+putstat64 (struct stat64 __user *ubuf, struct kstat *kbuf)
+{
+ int err;
+ u64 hdev;
+
+ if (clear_user(ubuf, sizeof(*ubuf)))
+ return -EFAULT;
+
+ hdev = huge_encode_dev(kbuf->dev);
+ err = __put_user(hdev, (u32 __user*)&ubuf->st_dev);
+ err |= __put_user(hdev >> 32, ((u32 __user*)&ubuf->st_dev) + 1);
+ err |= __put_user(kbuf->ino, &ubuf->__st_ino);
+ err |= __put_user(kbuf->ino, &ubuf->st_ino_lo);
+ err |= __put_user(kbuf->ino >> 32, &ubuf->st_ino_hi);
+ err |= __put_user(kbuf->mode, &ubuf->st_mode);
+ err |= __put_user(kbuf->nlink, &ubuf->st_nlink);
+ err |= __put_user(kbuf->uid, &ubuf->st_uid);
+ err |= __put_user(kbuf->gid, &ubuf->st_gid);
+ hdev = huge_encode_dev(kbuf->rdev);
+ err = __put_user(hdev, (u32 __user*)&ubuf->st_rdev);
+ err |= __put_user(hdev >> 32, ((u32 __user*)&ubuf->st_rdev) + 1);
+ err |= __put_user(kbuf->size, &ubuf->st_size_lo);
+ err |= __put_user((kbuf->size >> 32), &ubuf->st_size_hi);
+ err |= __put_user(kbuf->atime.tv_sec, &ubuf->st_atime);
+ err |= __put_user(kbuf->atime.tv_nsec, &ubuf->st_atime_nsec);
+ err |= __put_user(kbuf->mtime.tv_sec, &ubuf->st_mtime);
+ err |= __put_user(kbuf->mtime.tv_nsec, &ubuf->st_mtime_nsec);
+ err |= __put_user(kbuf->ctime.tv_sec, &ubuf->st_ctime);
+ err |= __put_user(kbuf->ctime.tv_nsec, &ubuf->st_ctime_nsec);
+ err |= __put_user(kbuf->blksize, &ubuf->st_blksize);
+ err |= __put_user(kbuf->blocks, &ubuf->st_blocks);
+ return err;
+}
+
+asmlinkage long
+sys32_stat64 (char __user *filename, struct stat64 __user *statbuf)
+{
+ struct kstat s;
+ long ret = vfs_stat(filename, &s);
+ if (!ret)
+ ret = putstat64(statbuf, &s);
+ return ret;
+}
+
+asmlinkage long
+sys32_lstat64 (char __user *filename, struct stat64 __user *statbuf)
+{
+ struct kstat s;
+ long ret = vfs_lstat(filename, &s);
+ if (!ret)
+ ret = putstat64(statbuf, &s);
+ return ret;
+}
+
+asmlinkage long
+sys32_fstat64 (unsigned int fd, struct stat64 __user *statbuf)
+{
+ struct kstat s;
+ long ret = vfs_fstat(fd, &s);
+ if (!ret)
+ ret = putstat64(statbuf, &s);
+ return ret;
+}
+
+struct sysinfo32 {
+ s32 uptime;
+ u32 loads[3];
+ u32 totalram;
+ u32 freeram;
+ u32 sharedram;
+ u32 bufferram;
+ u32 totalswap;
+ u32 freeswap;
+ u16 procs;
+ u16 pad;
+ u32 totalhigh;
+ u32 freehigh;
+ u32 mem_unit;
+ char _f[8];
+};
+
+asmlinkage long
+sys32_sysinfo (struct sysinfo32 __user *info)
+{
+ struct sysinfo s;
+ long ret, err;
+ int bitcount = 0;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ ret = sys_sysinfo((struct sysinfo __user *) &s);
+ set_fs(old_fs);
+ /* Check to see if any memory value is too large for 32-bit and
+ * scale down if needed.
+ */
+ if ((s.totalram >> 32) || (s.totalswap >> 32)) {
+ while (s.mem_unit < PAGE_SIZE) {
+ s.mem_unit <<= 1;
+ bitcount++;
+ }
+ s.totalram >>= bitcount;
+ s.freeram >>= bitcount;
+ s.sharedram >>= bitcount;
+ s.bufferram >>= bitcount;
+ s.totalswap >>= bitcount;
+ s.freeswap >>= bitcount;
+ s.totalhigh >>= bitcount;
+ s.freehigh >>= bitcount;
+ }
+
+ if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
+ return -EFAULT;
+
+ err = __put_user(s.uptime, &info->uptime);
+ err |= __put_user(s.loads[0], &info->loads[0]);
+ err |= __put_user(s.loads[1], &info->loads[1]);
+ err |= __put_user(s.loads[2], &info->loads[2]);
+ err |= __put_user(s.totalram, &info->totalram);
+ err |= __put_user(s.freeram, &info->freeram);
+ err |= __put_user(s.sharedram, &info->sharedram);
+ err |= __put_user(s.bufferram, &info->bufferram);
+ err |= __put_user(s.totalswap, &info->totalswap);
+ err |= __put_user(s.freeswap, &info->freeswap);
+ err |= __put_user(s.procs, &info->procs);
+ err |= __put_user (s.totalhigh, &info->totalhigh);
+ err |= __put_user (s.freehigh, &info->freehigh);
+ err |= __put_user (s.mem_unit, &info->mem_unit);
+ if (err)
+ return -EFAULT;
+ return ret;
+}
+
+asmlinkage long
+sys32_sched_rr_get_interval (pid_t pid, struct compat_timespec __user *interval)
+{
+ mm_segment_t old_fs = get_fs();
+ struct timespec t;
+ long ret;
+
+ set_fs(KERNEL_DS);
+ ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t);
+ set_fs(old_fs);
+ if (put_compat_timespec(&t, interval))
+ return -EFAULT;
+ return ret;
+}
+
+asmlinkage long
+sys32_pread (unsigned int fd, void __user *buf, unsigned int count, u32 pos_lo, u32 pos_hi)
+{
+ return sys_pread64(fd, buf, count, ((unsigned long) pos_hi << 32) | pos_lo);
+}
+
+asmlinkage long
+sys32_pwrite (unsigned int fd, void __user *buf, unsigned int count, u32 pos_lo, u32 pos_hi)
+{
+ return sys_pwrite64(fd, buf, count, ((unsigned long) pos_hi << 32) | pos_lo);
+}
+
+asmlinkage long
+sys32_sendfile (int out_fd, int in_fd, int __user *offset, unsigned int count)
+{
+ mm_segment_t old_fs = get_fs();
+ long ret;
+ off_t of;
+
+ if (offset && get_user(of, offset))
+ return -EFAULT;
+
+ set_fs(KERNEL_DS);
+ ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *) &of : NULL, count);
+ set_fs(old_fs);
+
+ if (!ret && offset && put_user(of, offset))
+ return -EFAULT;
+
+ return ret;
+}
+
+asmlinkage long
+sys32_personality (unsigned int personality)
+{
+ long ret;
+
+ if (current->personality == PER_LINUX32 && personality == PER_LINUX)
+ personality = PER_LINUX32;
+ ret = sys_personality(personality);
+ if (ret == PER_LINUX32)
+ ret = PER_LINUX;
+ return ret;
+}
+
+asmlinkage unsigned long
+sys32_brk (unsigned int brk)
+{
+ unsigned long ret, obrk;
+ struct mm_struct *mm = current->mm;
+
+ obrk = mm->brk;
+ ret = sys_brk(brk);
+ if (ret < obrk)
+ clear_user(compat_ptr(ret), PAGE_ALIGN(ret) - ret);
+ return ret;
+}
+
+/*
+ * Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag.
+ */
+asmlinkage long
+sys32_open (const char __user * filename, int flags, int mode)
+{
+ char * tmp;
+ int fd, error;
+
+ tmp = getname(filename);
+ fd = PTR_ERR(tmp);
+ if (!IS_ERR(tmp)) {
+ fd = get_unused_fd();
+ if (fd >= 0) {
+ struct file *f = filp_open(tmp, flags, mode);
+ error = PTR_ERR(f);
+ if (IS_ERR(f))
+ goto out_error;
+ fd_install(fd, f);
+ }
+out:
+ putname(tmp);
+ }
+ return fd;
+
+out_error:
+ put_unused_fd(fd);
+ fd = error;
+ goto out;
+}
+
+/* Structure for ia32 emulation on ia64 */
+struct epoll_event32
+{
+ u32 events;
+ u32 data[2];
+};
+
+asmlinkage long
+sys32_epoll_ctl(int epfd, int op, int fd, struct epoll_event32 __user *event)
+{
+ mm_segment_t old_fs = get_fs();
+ struct epoll_event event64;
+ int error;
+ u32 data_halfword;
+
+ if (!access_ok(VERIFY_READ, event, sizeof(struct epoll_event32)))
+ return -EFAULT;
+
+ __get_user(event64.events, &event->events);
+ __get_user(data_halfword, &event->data[0]);
+ event64.data = data_halfword;
+ __get_user(data_halfword, &event->data[1]);
+ event64.data |= (u64)data_halfword << 32;
+
+ set_fs(KERNEL_DS);
+ error = sys_epoll_ctl(epfd, op, fd, (struct epoll_event __user *) &event64);
+ set_fs(old_fs);
+
+ return error;
+}
+
+asmlinkage long
+sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents,
+ int timeout)
+{
+ struct epoll_event *events64 = NULL;
+ mm_segment_t old_fs = get_fs();
+ int error, numevents, size;
+ int evt_idx;
+ int do_free_pages = 0;
+
+ if (maxevents <= 0) {
+ return -EINVAL;
+ }
+
+ /* Verify that the area passed by the user is writeable */
+ if (!access_ok(VERIFY_WRITE, events, maxevents * sizeof(struct epoll_event32)))
+ return -EFAULT;
+
+ /*
+ * Allocate space for the intermediate copy. If the space needed
+ * is large enough to cause kmalloc to fail, then try again with
+ * __get_free_pages.
+ */
+ size = maxevents * sizeof(struct epoll_event);
+ events64 = kmalloc(size, GFP_KERNEL);
+ if (events64 == NULL) {
+ events64 = (struct epoll_event *)
+ __get_free_pages(GFP_KERNEL, get_order(size));
+ if (events64 == NULL)
+ return -ENOMEM;
+ do_free_pages = 1;
+ }
+
+ /* Do the system call */
+ set_fs(KERNEL_DS); /* copy_to/from_user should work on kernel mem*/
+ numevents = sys_epoll_wait(epfd, (struct epoll_event __user *) events64,
+ maxevents, timeout);
+ set_fs(old_fs);
+
+ /* Don't modify userspace memory if we're returning an error */
+ if (numevents > 0) {
+ /* Translate the 64-bit structures back into the 32-bit
+ structures */
+ for (evt_idx = 0; evt_idx < numevents; evt_idx++) {
+ __put_user(events64[evt_idx].events,
+ &events[evt_idx].events);
+ __put_user((u32)events64[evt_idx].data,
+ &events[evt_idx].data[0]);
+ __put_user((u32)(events64[evt_idx].data >> 32),
+ &events[evt_idx].data[1]);
+ }
+ }
+
+ if (do_free_pages)
+ free_pages((unsigned long) events64, get_order(size));
+ else
+ kfree(events64);
+ return numevents;
+}
+
+/*
+ * Get a yet unused TLS descriptor index.
+ */
+static int
+get_free_idx (void)
+{
+ struct thread_struct *t = &current->thread;
+ int idx;
+
+ for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
+ if (desc_empty(t->tls_array + idx))
+ return idx + GDT_ENTRY_TLS_MIN;
+ return -ESRCH;
+}
+
+/*
+ * Set a given TLS descriptor:
+ */
+asmlinkage int
+sys32_set_thread_area (struct ia32_user_desc __user *u_info)
+{
+ struct thread_struct *t = &current->thread;
+ struct ia32_user_desc info;
+ struct desc_struct *desc;
+ int cpu, idx;
+
+ if (copy_from_user(&info, u_info, sizeof(info)))
+ return -EFAULT;
+ idx = info.entry_number;
+
+ /*
+ * index -1 means the kernel should try to find and allocate an empty descriptor:
+ */
+ if (idx == -1) {
+ idx = get_free_idx();
+ if (idx < 0)
+ return idx;
+ if (put_user(idx, &u_info->entry_number))
+ return -EFAULT;
+ }
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+ cpu = smp_processor_id();
+
+ if (LDT_empty(&info)) {
+ desc->a = 0;
+ desc->b = 0;
+ } else {
+ desc->a = LDT_entry_a(&info);
+ desc->b = LDT_entry_b(&info);
+ }
+ load_TLS(t, cpu);
+ return 0;
+}
+
+/*
+ * Get the current Thread-Local Storage area:
+ */
+
+#define GET_BASE(desc) ( \
+ (((desc)->a >> 16) & 0x0000ffff) | \
+ (((desc)->b << 16) & 0x00ff0000) | \
+ ( (desc)->b & 0xff000000) )
+
+#define GET_LIMIT(desc) ( \
+ ((desc)->a & 0x0ffff) | \
+ ((desc)->b & 0xf0000) )
+
+#define GET_32BIT(desc) (((desc)->b >> 22) & 1)
+#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3)
+#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1)
+#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1)
+#define GET_PRESENT(desc) (((desc)->b >> 15) & 1)
+#define GET_USEABLE(desc) (((desc)->b >> 20) & 1)
+
+asmlinkage int
+sys32_get_thread_area (struct ia32_user_desc __user *u_info)
+{
+ struct ia32_user_desc info;
+ struct desc_struct *desc;
+ int idx;
+
+ if (get_user(idx, &u_info->entry_number))
+ return -EFAULT;
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+ info.entry_number = idx;
+ info.base_addr = GET_BASE(desc);
+ info.limit = GET_LIMIT(desc);
+ info.seg_32bit = GET_32BIT(desc);
+ info.contents = GET_CONTENTS(desc);
+ info.read_exec_only = !GET_WRITABLE(desc);
+ info.limit_in_pages = GET_LIMIT_PAGES(desc);
+ info.seg_not_present = !GET_PRESENT(desc);
+ info.useable = GET_USEABLE(desc);
+
+ if (copy_to_user(u_info, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+}
+
+asmlinkage long
+sys32_timer_create(u32 clock, struct compat_sigevent __user *se32, timer_t __user *timer_id)
+{
+ struct sigevent se;
+ mm_segment_t oldfs;
+ timer_t t;
+ long err;
+
+ if (se32 == NULL)
+ return sys_timer_create(clock, NULL, timer_id);
+
+ if (get_compat_sigevent(&se, se32))
+ return -EFAULT;
+
+ if (!access_ok(VERIFY_WRITE,timer_id,sizeof(timer_t)))
+ return -EFAULT;
+
+ oldfs = get_fs();
+ set_fs(KERNEL_DS);
+ err = sys_timer_create(clock, (struct sigevent __user *) &se, (timer_t __user *) &t);
+ set_fs(oldfs);
+
+ if (!err)
+ err = __put_user (t, timer_id);
+
+ return err;
+}
+
+long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high,
+ __u32 len_low, __u32 len_high, int advice)
+{
+ return sys_fadvise64_64(fd,
+ (((u64)offset_high)<<32) | offset_low,
+ (((u64)len_high)<<32) | len_low,
+ advice);
+}
+
+#ifdef NOTYET /* UNTESTED FOR IA64 FROM HERE DOWN */
+
+asmlinkage long sys32_setreuid(compat_uid_t ruid, compat_uid_t euid)
+{
+ uid_t sruid, seuid;
+
+ sruid = (ruid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)ruid);
+ seuid = (euid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)euid);
+ return sys_setreuid(sruid, seuid);
+}
+
+asmlinkage long
+sys32_setresuid(compat_uid_t ruid, compat_uid_t euid,
+ compat_uid_t suid)
+{
+ uid_t sruid, seuid, ssuid;
+
+ sruid = (ruid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)ruid);
+ seuid = (euid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)euid);
+ ssuid = (suid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)suid);
+ return sys_setresuid(sruid, seuid, ssuid);
+}
+
+asmlinkage long
+sys32_setregid(compat_gid_t rgid, compat_gid_t egid)
+{
+ gid_t srgid, segid;
+
+ srgid = (rgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)rgid);
+ segid = (egid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)egid);
+ return sys_setregid(srgid, segid);
+}
+
+asmlinkage long
+sys32_setresgid(compat_gid_t rgid, compat_gid_t egid,
+ compat_gid_t sgid)
+{
+ gid_t srgid, segid, ssgid;
+
+ srgid = (rgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)rgid);
+ segid = (egid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)egid);
+ ssgid = (sgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)sgid);
+ return sys_setresgid(srgid, segid, ssgid);
+}
+
+/* Handle adjtimex compatibility. */
+
+struct timex32 {
+ u32 modes;
+ s32 offset, freq, maxerror, esterror;
+ s32 status, constant, precision, tolerance;
+ struct compat_timeval time;
+ s32 tick;
+ s32 ppsfreq, jitter, shift, stabil;
+ s32 jitcnt, calcnt, errcnt, stbcnt;
+ s32 :32; s32 :32; s32 :32; s32 :32;
+ s32 :32; s32 :32; s32 :32; s32 :32;
+ s32 :32; s32 :32; s32 :32; s32 :32;
+};
+
+extern int do_adjtimex(struct timex *);
+
+asmlinkage long
+sys32_adjtimex(struct timex32 *utp)
+{
+ struct timex txc;
+ int ret;
+
+ memset(&txc, 0, sizeof(struct timex));
+
+ if(get_user(txc.modes, &utp->modes) ||
+ __get_user(txc.offset, &utp->offset) ||
+ __get_user(txc.freq, &utp->freq) ||
+ __get_user(txc.maxerror, &utp->maxerror) ||
+ __get_user(txc.esterror, &utp->esterror) ||
+ __get_user(txc.status, &utp->status) ||
+ __get_user(txc.constant, &utp->constant) ||
+ __get_user(txc.precision, &utp->precision) ||
+ __get_user(txc.tolerance, &utp->tolerance) ||
+ __get_user(txc.time.tv_sec, &utp->time.tv_sec) ||
+ __get_user(txc.time.tv_usec, &utp->time.tv_usec) ||
+ __get_user(txc.tick, &utp->tick) ||
+ __get_user(txc.ppsfreq, &utp->ppsfreq) ||
+ __get_user(txc.jitter, &utp->jitter) ||
+ __get_user(txc.shift, &utp->shift) ||
+ __get_user(txc.stabil, &utp->stabil) ||
+ __get_user(txc.jitcnt, &utp->jitcnt) ||
+ __get_user(txc.calcnt, &utp->calcnt) ||
+ __get_user(txc.errcnt, &utp->errcnt) ||
+ __get_user(txc.stbcnt, &utp->stbcnt))
+ return -EFAULT;
+
+ ret = do_adjtimex(&txc);
+
+ if(put_user(txc.modes, &utp->modes) ||
+ __put_user(txc.offset, &utp->offset) ||
+ __put_user(txc.freq, &utp->freq) ||
+ __put_user(txc.maxerror, &utp->maxerror) ||
+ __put_user(txc.esterror, &utp->esterror) ||
+ __put_user(txc.status, &utp->status) ||
+ __put_user(txc.constant, &utp->constant) ||
+ __put_user(txc.precision, &utp->precision) ||
+ __put_user(txc.tolerance, &utp->tolerance) ||
+ __put_user(txc.time.tv_sec, &utp->time.tv_sec) ||
+ __put_user(txc.time.tv_usec, &utp->time.tv_usec) ||
+ __put_user(txc.tick, &utp->tick) ||
+ __put_user(txc.ppsfreq, &utp->ppsfreq) ||
+ __put_user(txc.jitter, &utp->jitter) ||
+ __put_user(txc.shift, &utp->shift) ||
+ __put_user(txc.stabil, &utp->stabil) ||
+ __put_user(txc.jitcnt, &utp->jitcnt) ||
+ __put_user(txc.calcnt, &utp->calcnt) ||
+ __put_user(txc.errcnt, &utp->errcnt) ||
+ __put_user(txc.stbcnt, &utp->stbcnt))
+ ret = -EFAULT;
+
+ return ret;
+}
+#endif /* NOTYET */
diff --git a/arch/ia64/install.sh b/arch/ia64/install.sh
new file mode 100644
index 000000000000..929e780026d1
--- /dev/null
+++ b/arch/ia64/install.sh
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# arch/ia64/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install" script for ia64 architecture
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install path (blank if root directory)
+#
+
+# User may have a custom install script
+
+if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
+if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+
+# Default install - same as make zlilo
+
+if [ -f $4/vmlinuz ]; then
+ mv $4/vmlinuz $4/vmlinuz.old
+fi
+
+if [ -f $4/System.map ]; then
+ mv $4/System.map $4/System.old
+fi
+
+cat $2 > $4/vmlinuz
+cp $3 $4/System.map
+
+test -x /usr/sbin/elilo && /usr/sbin/elilo
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
new file mode 100644
index 000000000000..c1a02bbc252c
--- /dev/null
+++ b/arch/ia64/kernel/Makefile
@@ -0,0 +1,52 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
+ irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \
+ salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
+ unwind.o mca.o mca_asm.o topology.o
+
+obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o
+obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o
+obj-$(CONFIG_IA64_HP_ZX1) += acpi-ext.o
+obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o
+obj-$(CONFIG_IA64_PALINFO) += palinfo.o
+obj-$(CONFIG_IOSAPIC) += iosapic.o
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o
+obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o
+obj-$(CONFIG_IA64_CYCLONE) += cyclone.o
+obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o
+mca_recovery-y += mca_drv.o mca_drv_asm.o
+
+# The gate DSO image is built using a special linker script.
+targets += gate.so gate-syms.o
+
+extra-y += gate.so gate-syms.o gate.lds gate.o
+
+# fp_emulate() expects f2-f5,f16-f31 to contain the user-level state.
+CFLAGS_traps.o += -mfixed-range=f2-f5,f16-f31
+
+CPPFLAGS_gate.lds := -P -C -U$(ARCH)
+
+quiet_cmd_gate = GATE $@
+ cmd_gate = $(CC) -nostdlib $(GATECFLAGS_$(@F)) -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+GATECFLAGS_gate.so = -shared -s -Wl,-soname=linux-gate.so.1
+$(obj)/gate.so: $(obj)/gate.lds $(obj)/gate.o FORCE
+ $(call if_changed,gate)
+
+$(obj)/built-in.o: $(obj)/gate-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/gate-syms.o
+
+GATECFLAGS_gate-syms.o = -r
+$(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
+ $(call if_changed,gate)
+
+# gate-data.o contains the gate DSO image as data in section .data.gate.
+# We must build gate.so before we can assemble it.
+# Note: kbuild does not track this dependency due to usage of .incbin
+$(obj)/gate-data.o: $(obj)/gate.so
diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c
new file mode 100644
index 000000000000..2623df5e2633
--- /dev/null
+++ b/arch/ia64/kernel/acpi-ext.c
@@ -0,0 +1,100 @@
+/*
+ * arch/ia64/kernel/acpi-ext.c
+ *
+ * Copyright (C) 2003 Hewlett-Packard
+ * Copyright (C) Alex Williamson
+ * Copyright (C) Bjorn Helgaas
+ *
+ * Vendor specific extensions to ACPI.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+
+#include <asm/acpi-ext.h>
+
+struct acpi_vendor_descriptor {
+ u8 guid_id;
+ efi_guid_t guid;
+};
+
+struct acpi_vendor_info {
+ struct acpi_vendor_descriptor *descriptor;
+ u8 *data;
+ u32 length;
+};
+
+acpi_status
+acpi_vendor_resource_match(struct acpi_resource *resource, void *context)
+{
+ struct acpi_vendor_info *info = (struct acpi_vendor_info *) context;
+ struct acpi_resource_vendor *vendor;
+ struct acpi_vendor_descriptor *descriptor;
+ u32 length;
+
+ if (resource->id != ACPI_RSTYPE_VENDOR)
+ return AE_OK;
+
+ vendor = (struct acpi_resource_vendor *) &resource->data;
+ descriptor = (struct acpi_vendor_descriptor *) vendor->reserved;
+ if (vendor->length <= sizeof(*info->descriptor) ||
+ descriptor->guid_id != info->descriptor->guid_id ||
+ efi_guidcmp(descriptor->guid, info->descriptor->guid))
+ return AE_OK;
+
+ length = vendor->length - sizeof(struct acpi_vendor_descriptor);
+ info->data = acpi_os_allocate(length);
+ if (!info->data)
+ return AE_NO_MEMORY;
+
+ memcpy(info->data, vendor->reserved + sizeof(struct acpi_vendor_descriptor), length);
+ info->length = length;
+ return AE_CTRL_TERMINATE;
+}
+
+acpi_status
+acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id,
+ u8 **data, u32 *length)
+{
+ struct acpi_vendor_info info;
+
+ info.descriptor = id;
+ info.data = NULL;
+
+ acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, &info);
+ if (!info.data)
+ return AE_NOT_FOUND;
+
+ *data = info.data;
+ *length = info.length;
+ return AE_OK;
+}
+
+struct acpi_vendor_descriptor hp_ccsr_descriptor = {
+ .guid_id = 2,
+ .guid = EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad)
+};
+
+acpi_status
+hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length)
+{
+ acpi_status status;
+ u8 *data;
+ u32 length;
+
+ status = acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length);
+
+ if (ACPI_FAILURE(status) || length != 16)
+ return AE_NOT_FOUND;
+
+ memcpy(csr_base, data, sizeof(*csr_base));
+ memcpy(csr_length, data + 8, sizeof(*csr_length));
+ acpi_os_free(data);
+
+ return AE_OK;
+}
+
+EXPORT_SYMBOL(hp_acpi_csr_space);
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
new file mode 100644
index 000000000000..a8e99c56a768
--- /dev/null
+++ b/arch/ia64/kernel/acpi.c
@@ -0,0 +1,841 @@
+/*
+ * acpi.c - Architecture-Specific Low-Level ACPI Support
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co.
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2000 Intel Corp.
+ * Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
+ * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com>
+ * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
+#include <asm/io.h>
+#include <asm/iosapic.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/numa.h>
+#include <asm/sal.h>
+#include <asm/cyclone.h>
+
+#define BAD_MADT_ENTRY(entry, end) ( \
+ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
+ ((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+
+#define PREFIX "ACPI: "
+
+void (*pm_idle) (void);
+EXPORT_SYMBOL(pm_idle);
+void (*pm_power_off) (void);
+EXPORT_SYMBOL(pm_power_off);
+
+unsigned char acpi_kbd_controller_present = 1;
+unsigned char acpi_legacy_devices;
+
+#define MAX_SAPICS 256
+u16 ia64_acpiid_to_sapicid[MAX_SAPICS] =
+ { [0 ... MAX_SAPICS - 1] = -1 };
+EXPORT_SYMBOL(ia64_acpiid_to_sapicid);
+
+const char *
+acpi_get_sysname (void)
+{
+#ifdef CONFIG_IA64_GENERIC
+ unsigned long rsdp_phys;
+ struct acpi20_table_rsdp *rsdp;
+ struct acpi_table_xsdt *xsdt;
+ struct acpi_table_header *hdr;
+
+ rsdp_phys = acpi_find_rsdp();
+ if (!rsdp_phys) {
+ printk(KERN_ERR "ACPI 2.0 RSDP not found, default to \"dig\"\n");
+ return "dig";
+ }
+
+ rsdp = (struct acpi20_table_rsdp *) __va(rsdp_phys);
+ if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) {
+ printk(KERN_ERR "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
+ return "dig";
+ }
+
+ xsdt = (struct acpi_table_xsdt *) __va(rsdp->xsdt_address);
+ hdr = &xsdt->header;
+ if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) {
+ printk(KERN_ERR "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
+ return "dig";
+ }
+
+ if (!strcmp(hdr->oem_id, "HP")) {
+ return "hpzx1";
+ }
+ else if (!strcmp(hdr->oem_id, "SGI")) {
+ return "sn2";
+ }
+
+ return "dig";
+#else
+# if defined (CONFIG_IA64_HP_SIM)
+ return "hpsim";
+# elif defined (CONFIG_IA64_HP_ZX1)
+ return "hpzx1";
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+ return "hpzx1_swiotlb";
+# elif defined (CONFIG_IA64_SGI_SN2)
+ return "sn2";
+# elif defined (CONFIG_IA64_DIG)
+ return "dig";
+# else
+# error Unknown platform. Fix acpi.c.
+# endif
+#endif
+}
+
+#ifdef CONFIG_ACPI_BOOT
+
+#define ACPI_MAX_PLATFORM_INTERRUPTS 256
+
+/* Array to record platform interrupt vectors for generic interrupt routing. */
+int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = {
+ [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1
+};
+
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC;
+
+/*
+ * Interrupt routing API for device drivers. Provides interrupt vector for
+ * a generic platform event. Currently only CPEI is implemented.
+ */
+int
+acpi_request_vector (u32 int_type)
+{
+ int vector = -1;
+
+ if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) {
+ /* corrected platform error interrupt */
+ vector = platform_intr_list[int_type];
+ } else
+ printk(KERN_ERR "acpi_request_vector(): invalid interrupt type\n");
+ return vector;
+}
+
+char *
+__acpi_map_table (unsigned long phys_addr, unsigned long size)
+{
+ return __va(phys_addr);
+}
+
+/* --------------------------------------------------------------------------
+ Boot-time Table Parsing
+ -------------------------------------------------------------------------- */
+
+static int total_cpus __initdata;
+static int available_cpus __initdata;
+struct acpi_table_madt * acpi_madt __initdata;
+static u8 has_8259;
+
+
+static int __init
+acpi_parse_lapic_addr_ovr (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic_addr_ovr *lapic;
+
+ lapic = (struct acpi_table_lapic_addr_ovr *) header;
+
+ if (BAD_MADT_ENTRY(lapic, end))
+ return -EINVAL;
+
+ if (lapic->address) {
+ iounmap(ipi_base_addr);
+ ipi_base_addr = ioremap(lapic->address, 0);
+ }
+ return 0;
+}
+
+
+static int __init
+acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lsapic *lsapic;
+
+ lsapic = (struct acpi_table_lsapic *) header;
+
+ if (BAD_MADT_ENTRY(lsapic, end))
+ return -EINVAL;
+
+ if (lsapic->flags.enabled) {
+#ifdef CONFIG_SMP
+ smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid;
+#endif
+ ia64_acpiid_to_sapicid[lsapic->acpi_id] = (lsapic->id << 8) | lsapic->eid;
+ ++available_cpus;
+ }
+
+ total_cpus++;
+ return 0;
+}
+
+
+static int __init
+acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic_nmi *lacpi_nmi;
+
+ lacpi_nmi = (struct acpi_table_lapic_nmi*) header;
+
+ if (BAD_MADT_ENTRY(lacpi_nmi, end))
+ return -EINVAL;
+
+ /* TBD: Support lapic_nmi entries */
+ return 0;
+}
+
+
+static int __init
+acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_iosapic *iosapic;
+
+ iosapic = (struct acpi_table_iosapic *) header;
+
+ if (BAD_MADT_ENTRY(iosapic, end))
+ return -EINVAL;
+
+ iosapic_init(iosapic->address, iosapic->global_irq_base);
+
+ return 0;
+}
+
+
+static int __init
+acpi_parse_plat_int_src (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_plat_int_src *plintsrc;
+ int vector;
+
+ plintsrc = (struct acpi_table_plat_int_src *) header;
+
+ if (BAD_MADT_ENTRY(plintsrc, end))
+ return -EINVAL;
+
+ /*
+ * Get vector assignment for this interrupt, set attributes,
+ * and program the IOSAPIC routing table.
+ */
+ vector = iosapic_register_platform_intr(plintsrc->type,
+ plintsrc->global_irq,
+ plintsrc->iosapic_vector,
+ plintsrc->eid,
+ plintsrc->id,
+ (plintsrc->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
+ (plintsrc->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);
+
+ platform_intr_list[plintsrc->type] = vector;
+ return 0;
+}
+
+
+static int __init
+acpi_parse_int_src_ovr (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_int_src_ovr *p;
+
+ p = (struct acpi_table_int_src_ovr *) header;
+
+ if (BAD_MADT_ENTRY(p, end))
+ return -EINVAL;
+
+ iosapic_override_isa_irq(p->bus_irq, p->global_irq,
+ (p->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
+ (p->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);
+ return 0;
+}
+
+
+static int __init
+acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_nmi_src *nmi_src;
+
+ nmi_src = (struct acpi_table_nmi_src*) header;
+
+ if (BAD_MADT_ENTRY(nmi_src, end))
+ return -EINVAL;
+
+ /* TBD: Support nimsrc entries */
+ return 0;
+}
+
+static void __init
+acpi_madt_oem_check (char *oem_id, char *oem_table_id)
+{
+ if (!strncmp(oem_id, "IBM", 3) &&
+ (!strncmp(oem_table_id, "SERMOW", 6))) {
+
+ /*
+ * Unfortunately ITC_DRIFT is not yet part of the
+ * official SAL spec, so the ITC_DRIFT bit is not
+ * set by the BIOS on this hardware.
+ */
+ sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT;
+
+ cyclone_setup();
+ }
+}
+
+static int __init
+acpi_parse_madt (unsigned long phys_addr, unsigned long size)
+{
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ acpi_madt = (struct acpi_table_madt *) __va(phys_addr);
+
+ /* remember the value for reference after free_initmem() */
+#ifdef CONFIG_ITANIUM
+ has_8259 = 1; /* Firmware on old Itanium systems is broken */
+#else
+ has_8259 = acpi_madt->flags.pcat_compat;
+#endif
+ iosapic_system_init(has_8259);
+
+ /* Get base address of IPI Message Block */
+
+ if (acpi_madt->lapic_address)
+ ipi_base_addr = ioremap(acpi_madt->lapic_address, 0);
+
+ printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr);
+
+ acpi_madt_oem_check(acpi_madt->header.oem_id,
+ acpi_madt->header.oem_table_id);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_ACPI_NUMA
+
+#undef SLIT_DEBUG
+
+#define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
+
+static int __initdata srat_num_cpus; /* number of cpus */
+static u32 __devinitdata pxm_flag[PXM_FLAG_LEN];
+#define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag))
+#define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag))
+/* maps to convert between proximity domain and logical node ID */
+int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
+int __initdata nid_to_pxm_map[MAX_NUMNODES];
+static struct acpi_table_slit __initdata *slit_table;
+
+/*
+ * ACPI 2.0 SLIT (System Locality Information Table)
+ * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
+ */
+void __init
+acpi_numa_slit_init (struct acpi_table_slit *slit)
+{
+ u32 len;
+
+ len = sizeof(struct acpi_table_header) + 8
+ + slit->localities * slit->localities;
+ if (slit->header.length != len) {
+ printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
+ len, slit->header.length);
+ memset(numa_slit, 10, sizeof(numa_slit));
+ return;
+ }
+ slit_table = slit;
+}
+
+void __init
+acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa)
+{
+ /* record this node in proximity bitmap */
+ pxm_bit_set(pa->proximity_domain);
+
+ node_cpuid[srat_num_cpus].phys_id = (pa->apic_id << 8) | (pa->lsapic_eid);
+ /* nid should be overridden as logical node id later */
+ node_cpuid[srat_num_cpus].nid = pa->proximity_domain;
+ srat_num_cpus++;
+}
+
+void __init
+acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma)
+{
+ unsigned long paddr, size;
+ u8 pxm;
+ struct node_memblk_s *p, *q, *pend;
+
+ pxm = ma->proximity_domain;
+
+ /* fill node memory chunk structure */
+ paddr = ma->base_addr_hi;
+ paddr = (paddr << 32) | ma->base_addr_lo;
+ size = ma->length_hi;
+ size = (size << 32) | ma->length_lo;
+
+ /* Ignore disabled entries */
+ if (!ma->flags.enabled)
+ return;
+
+ /* record this node in proximity bitmap */
+ pxm_bit_set(pxm);
+
+ /* Insertion sort based on base address */
+ pend = &node_memblk[num_node_memblks];
+ for (p = &node_memblk[0]; p < pend; p++) {
+ if (paddr < p->start_paddr)
+ break;
+ }
+ if (p < pend) {
+ for (q = pend - 1; q >= p; q--)
+ *(q + 1) = *q;
+ }
+ p->start_paddr = paddr;
+ p->size = size;
+ p->nid = pxm;
+ num_node_memblks++;
+}
+
+void __init
+acpi_numa_arch_fixup (void)
+{
+ int i, j, node_from, node_to;
+
+ /* If there's no SRAT, fix the phys_id and mark node 0 online */
+ if (srat_num_cpus == 0) {
+ node_set_online(0);
+ node_cpuid[0].phys_id = hard_smp_processor_id();
+ return;
+ }
+
+ /*
+ * MCD - This can probably be dropped now. No need for pxm ID to node ID
+ * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES.
+ */
+ /* calculate total number of nodes in system from PXM bitmap */
+ memset(pxm_to_nid_map, -1, sizeof(pxm_to_nid_map));
+ memset(nid_to_pxm_map, -1, sizeof(nid_to_pxm_map));
+ nodes_clear(node_online_map);
+ for (i = 0; i < MAX_PXM_DOMAINS; i++) {
+ if (pxm_bit_test(i)) {
+ int nid = num_online_nodes();
+ pxm_to_nid_map[i] = nid;
+ nid_to_pxm_map[nid] = i;
+ node_set_online(nid);
+ }
+ }
+
+ /* set logical node id in memory chunk structure */
+ for (i = 0; i < num_node_memblks; i++)
+ node_memblk[i].nid = pxm_to_nid_map[node_memblk[i].nid];
+
+ /* assign memory bank numbers for each chunk on each node */
+ for_each_online_node(i) {
+ int bank;
+
+ bank = 0;
+ for (j = 0; j < num_node_memblks; j++)
+ if (node_memblk[j].nid == i)
+ node_memblk[j].bank = bank++;
+ }
+
+ /* set logical node id in cpu structure */
+ for (i = 0; i < srat_num_cpus; i++)
+ node_cpuid[i].nid = pxm_to_nid_map[node_cpuid[i].nid];
+
+ printk(KERN_INFO "Number of logical nodes in system = %d\n", num_online_nodes());
+ printk(KERN_INFO "Number of memory chunks in system = %d\n", num_node_memblks);
+
+ if (!slit_table) return;
+ memset(numa_slit, -1, sizeof(numa_slit));
+ for (i=0; i<slit_table->localities; i++) {
+ if (!pxm_bit_test(i))
+ continue;
+ node_from = pxm_to_nid_map[i];
+ for (j=0; j<slit_table->localities; j++) {
+ if (!pxm_bit_test(j))
+ continue;
+ node_to = pxm_to_nid_map[j];
+ node_distance(node_from, node_to) =
+ slit_table->entry[i*slit_table->localities + j];
+ }
+ }
+
+#ifdef SLIT_DEBUG
+ printk("ACPI 2.0 SLIT locality table:\n");
+ for_each_online_node(i) {
+ for_each_online_node(j)
+ printk("%03d ", node_distance(i,j));
+ printk("\n");
+ }
+#endif
+}
+#endif /* CONFIG_ACPI_NUMA */
+
+unsigned int
+acpi_register_gsi (u32 gsi, int edge_level, int active_high_low)
+{
+ if (has_8259 && gsi < 16)
+ return isa_irq_to_vector(gsi);
+
+ return iosapic_register_intr(gsi,
+ (active_high_low == ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
+ (edge_level == ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);
+}
+EXPORT_SYMBOL(acpi_register_gsi);
+
+#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+void
+acpi_unregister_gsi (u32 gsi)
+{
+ iosapic_unregister_intr(gsi);
+}
+EXPORT_SYMBOL(acpi_unregister_gsi);
+#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
+
+static int __init
+acpi_parse_fadt (unsigned long phys_addr, unsigned long size)
+{
+ struct acpi_table_header *fadt_header;
+ struct fadt_descriptor_rev2 *fadt;
+
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ fadt_header = (struct acpi_table_header *) __va(phys_addr);
+ if (fadt_header->revision != 3)
+ return -ENODEV; /* Only deal with ACPI 2.0 FADT */
+
+ fadt = (struct fadt_descriptor_rev2 *) fadt_header;
+
+ if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER))
+ acpi_kbd_controller_present = 0;
+
+ if (fadt->iapc_boot_arch & BAF_LEGACY_DEVICES)
+ acpi_legacy_devices = 1;
+
+ acpi_register_gsi(fadt->sci_int, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+ return 0;
+}
+
+
+unsigned long __init
+acpi_find_rsdp (void)
+{
+ unsigned long rsdp_phys = 0;
+
+ if (efi.acpi20)
+ rsdp_phys = __pa(efi.acpi20);
+ else if (efi.acpi)
+ printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n");
+ return rsdp_phys;
+}
+
+
+int __init
+acpi_boot_init (void)
+{
+
+ /*
+ * MADT
+ * ----
+ * Parse the Multiple APIC Description Table (MADT), if exists.
+ * Note that this table provides platform SMP configuration
+ * information -- the successor to MPS tables.
+ */
+
+ if (acpi_table_parse(ACPI_APIC, acpi_parse_madt) < 1) {
+ printk(KERN_ERR PREFIX "Can't find MADT\n");
+ goto skip_madt;
+ }
+
+ /* Local APIC */
+
+ if (acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0)
+ printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+
+ if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) < 1)
+ printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n");
+
+ if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) < 0)
+ printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+
+ /* I/O APIC */
+
+ if (acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1)
+ printk(KERN_ERR PREFIX "Error parsing MADT - no IOSAPIC entries\n");
+
+ /* System-Level Interrupt Routing */
+
+ if (acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
+ printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n");
+
+ if (acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0)
+ printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+
+ if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0)
+ printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+ skip_madt:
+
+ /*
+ * FADT says whether a legacy keyboard controller is present.
+ * The FADT also contains an SCI_INT line, by which the system
+ * gets interrupts such as power and sleep buttons. If it's not
+ * on a Legacy interrupt, it needs to be setup.
+ */
+ if (acpi_table_parse(ACPI_FADT, acpi_parse_fadt) < 1)
+ printk(KERN_ERR PREFIX "Can't find FADT\n");
+
+#ifdef CONFIG_SMP
+ if (available_cpus == 0) {
+ printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n");
+ printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id());
+ smp_boot_data.cpu_phys_id[available_cpus] = hard_smp_processor_id();
+ available_cpus = 1; /* We've got at least one of these, no? */
+ }
+ smp_boot_data.cpu_count = available_cpus;
+
+ smp_build_cpu_map();
+# ifdef CONFIG_ACPI_NUMA
+ if (srat_num_cpus == 0) {
+ int cpu, i = 1;
+ for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)
+ if (smp_boot_data.cpu_phys_id[cpu] != hard_smp_processor_id())
+ node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu];
+ }
+ build_cpu_to_node_map();
+# endif
+#endif
+ /* Make boot-up look pretty */
+ printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, total_cpus);
+ return 0;
+}
+
+int
+acpi_gsi_to_irq (u32 gsi, unsigned int *irq)
+{
+ int vector;
+
+ if (has_8259 && gsi < 16)
+ *irq = isa_irq_to_vector(gsi);
+ else {
+ vector = gsi_to_vector(gsi);
+ if (vector == -1)
+ return -1;
+
+ *irq = vector;
+ }
+ return 0;
+}
+
+/*
+ * ACPI based hotplug CPU support
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+static
+int
+acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+ int pxm_id;
+
+ pxm_id = acpi_get_pxm(handle);
+
+ /*
+ * Assuming that the container driver would have set the proximity
+ * domain and would have initialized pxm_to_nid_map[pxm_id] && pxm_flag
+ */
+ node_cpuid[cpu].nid = (pxm_id < 0) ? 0:
+ pxm_to_nid_map[pxm_id];
+
+ node_cpuid[cpu].phys_id = physid;
+#endif
+ return(0);
+}
+
+
+int
+acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *obj;
+ struct acpi_table_lsapic *lsapic;
+ cpumask_t tmp_map;
+ long physid;
+ int cpu;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
+ return -EINVAL;
+
+ if (!buffer.length || !buffer.pointer)
+ return -EINVAL;
+
+ obj = buffer.pointer;
+ if (obj->type != ACPI_TYPE_BUFFER ||
+ obj->buffer.length < sizeof(*lsapic)) {
+ acpi_os_free(buffer.pointer);
+ return -EINVAL;
+ }
+
+ lsapic = (struct acpi_table_lsapic *)obj->buffer.pointer;
+
+ if ((lsapic->header.type != ACPI_MADT_LSAPIC) ||
+ (!lsapic->flags.enabled)) {
+ acpi_os_free(buffer.pointer);
+ return -EINVAL;
+ }
+
+ physid = ((lsapic->id <<8) | (lsapic->eid));
+
+ acpi_os_free(buffer.pointer);
+ buffer.length = ACPI_ALLOCATE_BUFFER;
+ buffer.pointer = NULL;
+
+ cpus_complement(tmp_map, cpu_present_map);
+ cpu = first_cpu(tmp_map);
+ if(cpu >= NR_CPUS)
+ return -EINVAL;
+
+ acpi_map_cpu2node(handle, cpu, physid);
+
+ cpu_set(cpu, cpu_present_map);
+ ia64_cpu_to_sapicid[cpu] = physid;
+ ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu];
+
+ *pcpu = cpu;
+ return(0);
+}
+EXPORT_SYMBOL(acpi_map_lsapic);
+
+
+int
+acpi_unmap_lsapic(int cpu)
+{
+ int i;
+
+ for (i=0; i<MAX_SAPICS; i++) {
+ if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) {
+ ia64_acpiid_to_sapicid[i] = -1;
+ break;
+ }
+ }
+ ia64_cpu_to_sapicid[cpu] = -1;
+ cpu_clear(cpu,cpu_present_map);
+
+#ifdef CONFIG_ACPI_NUMA
+ /* NUMA specific cleanup's */
+#endif
+
+ return(0);
+}
+EXPORT_SYMBOL(acpi_unmap_lsapic);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+
+#ifdef CONFIG_ACPI_NUMA
+acpi_status __init
+acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret)
+{
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *obj;
+ struct acpi_table_iosapic *iosapic;
+ unsigned int gsi_base;
+ int node;
+
+ /* Only care about objects w/ a method that returns the MADT */
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
+ return AE_OK;
+
+ if (!buffer.length || !buffer.pointer)
+ return AE_OK;
+
+ obj = buffer.pointer;
+ if (obj->type != ACPI_TYPE_BUFFER ||
+ obj->buffer.length < sizeof(*iosapic)) {
+ acpi_os_free(buffer.pointer);
+ return AE_OK;
+ }
+
+ iosapic = (struct acpi_table_iosapic *)obj->buffer.pointer;
+
+ if (iosapic->header.type != ACPI_MADT_IOSAPIC) {
+ acpi_os_free(buffer.pointer);
+ return AE_OK;
+ }
+
+ gsi_base = iosapic->global_irq_base;
+
+ acpi_os_free(buffer.pointer);
+ buffer.length = ACPI_ALLOCATE_BUFFER;
+ buffer.pointer = NULL;
+
+ /*
+ * OK, it's an IOSAPIC MADT entry, look for a _PXM method to tell
+ * us which node to associate this with.
+ */
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PXM", NULL, &buffer)))
+ return AE_OK;
+
+ if (!buffer.length || !buffer.pointer)
+ return AE_OK;
+
+ obj = buffer.pointer;
+
+ if (obj->type != ACPI_TYPE_INTEGER ||
+ obj->integer.value >= MAX_PXM_DOMAINS) {
+ acpi_os_free(buffer.pointer);
+ return AE_OK;
+ }
+
+ node = pxm_to_nid_map[obj->integer.value];
+ acpi_os_free(buffer.pointer);
+
+ if (node >= MAX_NUMNODES || !node_online(node) ||
+ cpus_empty(node_to_cpumask(node)))
+ return AE_OK;
+
+ /* We know a gsi to node mapping! */
+ map_iosapic_to_node(gsi_base, node);
+ return AE_OK;
+}
+#endif /* CONFIG_NUMA */
+#endif /* CONFIG_ACPI_BOOT */
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
new file mode 100644
index 000000000000..7d1ae2982c53
--- /dev/null
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -0,0 +1,239 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/config.h>
+
+#include <linux/sched.h>
+
+#include <asm-ia64/processor.h>
+#include <asm-ia64/ptrace.h>
+#include <asm-ia64/siginfo.h>
+#include <asm-ia64/sigcontext.h>
+#include <asm-ia64/mca.h>
+
+#include "../kernel/sigframe.h"
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+void foo(void)
+{
+ DEFINE(IA64_TASK_SIZE, sizeof (struct task_struct));
+ DEFINE(IA64_THREAD_INFO_SIZE, sizeof (struct thread_info));
+ DEFINE(IA64_PT_REGS_SIZE, sizeof (struct pt_regs));
+ DEFINE(IA64_SWITCH_STACK_SIZE, sizeof (struct switch_stack));
+ DEFINE(IA64_SIGINFO_SIZE, sizeof (struct siginfo));
+ DEFINE(IA64_CPU_SIZE, sizeof (struct cpuinfo_ia64));
+ DEFINE(SIGFRAME_SIZE, sizeof (struct sigfram