summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-11Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
2014-06-11Merge tag 'md/3.16' of git://neil.brown.name/mdLinus Torvalds
Pull md updates from Neil Brown: "Assorted md fixes for 3.16 Mostly performance improvements with a few corner-case bug fixes" * tag 'md/3.16' of git://neil.brown.name/md: raid5: speedup sync_request processing md/raid5: deadlock between retry_aligned_read with barrier io raid5: add an option to avoid copy data from bio to stripe cache md/bitmap: remove confusing code from filemap_get_page. raid5: avoid release list until last reference of the stripe md: md_clear_badblocks should return an error code on failure. md/raid56: Don't perform reads to support writes until stripe is ready. md: refuse to change shape of array if it is active but read-only
2014-06-11reiserfs: Fix compilation breakage with CONFIG_REISERFS_CHECKJan Kara
There was a bug in debug printout when CONFIG_REISERFS_CHECK was enabled so one of the assertions in do_balan.c didn't compile. Fix it. Fixes: 0080e9f9d3ac717537dbd6db1fc8ef72ce0b9cc1 Signed-off-by: Jan Kara <jack@suse.cz>
2014-06-10Merge MTD pullreq from 3.15-rc5Brian Norris
2014-06-10Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: "This contains: - addition of the Intel MID watchdog - removal of W83697HF and W83697UG drivers (code was merged into w83627hf_wdt driver) - addition of Armada 375/380 SoC support - conversion of imx2_wdt to regmap API and to watchdog core API - lots of other small improvements and fixes" [ Wim was also tagged by gmail as a spammer, but not delayed by days unlike Ben ] * git://www.linux-watchdog.org/linux-watchdog: (25 commits) x86: intel-mid: add watchdog platform code for Merrifield watchdog: add Intel MID watchdog driver support watchdog: sp805: Set watchdog_device->timeout from ->set_timeout() booke/watchdog: refine and clean up the codes watchdog: iop_wdt only builds for mach-iop13xx watchdog: Remove drivers for W83697HF and W83697UG watchdog: w83627hf_wdt: Add early_disable module parameter ARM: mvebu: Add A375/A380 watchdog binding documentation watchdog: orion: Add Armada 375/380 SoC support watchdog: orion: Introduce per-SoC enabled() function watchdog: orion: Introduce per-SoC stop() function watchdog: orion: Remove unneeded atomic access watchdog: orion: Introduce a SoC-specific RSTOUT mapping watchdog: orion: Move the register ioremap'ing to its own function watchdog: xilinx: Make of_device_id array const watchdog: imx2_wdt: convert to watchdog core api watchdog: imx2_wdt: convert to use regmap API. watchdog: imx2_wdt: Sort the header files alphabetically watchdog: ath79_wdt: switch to clk_prepare/clk_disable watchdog: ath79_wdt: avoid spurious restarts on AR934x ...
2014-06-10Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "Here is the bulk of the powerpc changes for this merge window. It got a bit delayed in part because I wasn't paying attention, and in part because I discovered I had a core PCI change without a PCI maintainer ack in it. Bjorn eventually agreed it was ok to merge it though we'll probably improve it later and I didn't want to rebase to add his ack. There is going to be a bit more next week, essentially fixes that I still want to sort through and test. The biggest item this time is the support to build the ppc64 LE kernel with our new v2 ABI. We previously supported v2 userspace but the kernel itself was a tougher nut to crack. This is now sorted mostly thanks to Anton and Rusty. We also have a fairly big series from Cedric that add support for 64-bit LE zImage boot wrapper. This was made harder by the fact that traditionally our zImage wrapper was always 32-bit, but our new LE toolchains don't really support 32-bit anymore (it's somewhat there but not really "supported") so we didn't want to rely on it. This meant more churn that just endian fixes. This brings some more LE bits as well, such as the ability to run in LE mode without a hypervisor (ie. under OPAL firmware) by doing the right OPAL call to reinitialize the CPU to take HV interrupts in the right mode and the usual pile of endian fixes. There's another series from Gavin adding EEH improvements (one day we *will* have a release with less than 20 EEH patches, I promise!). Another highlight is the support for the "Split core" functionality on P8 by Michael. This allows a P8 core to be split into "sub cores" of 4 threads which allows the subcores to run different guests under KVM (the HW still doesn't support a partition per thread). And then the usual misc bits and fixes ..." [ Further delayed by gmail deciding that BenH is a dirty spammer. Google knows. ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits) powerpc/powernv: Add missing include to LPC code selftests/powerpc: Test the THP bug we fixed in the previous commit powerpc/mm: Check paca psize is up to date for huge mappings powerpc/powernv: Pass buffer size to OPAL validate flash call powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC() powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC() powerpc/powernv: Set memory_block_size_bytes to 256MB powerpc: Allow ppc_md platform hook to override memory_block_size_bytes powerpc/powernv: Fix endian issues in memory error handling code powerpc/eeh: Skip eeh sysfs when eeh is disabled powerpc: 64bit sendfile is capped at 2GB powerpc/powernv: Provide debugfs access to the LPC bus via OPAL powerpc/serial: Use saner flags when creating legacy ports powerpc: Add cpu family documentation powerpc/xmon: Fix up xmon format strings powerpc/powernv: Add calls to support little endian host powerpc: Document sysfs DSCR interface powerpc: Fix regression of per-CPU DSCR setting powerpc: Split __SYSFS_SPRSETUP macro arch: powerpc/fadump: Cleaning up inconsistent NULL checks ...
2014-06-10Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "Very little of excitement here - the most significant is a new driver for detecting device freefall on Dells, other than that it's pretty much entirely minor fixes for specific machines" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: hp-wmi: Enable hotkeys on some systems thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540 platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810) ideapad_laptop: Introduce the use of the managed version of kzalloc platform/x86: Fix run-time dependencies of OLPC drivers platform: x86: asus-wmi.c: Cleaning up uninitialized variables ix86/mid/thermal: Introduce the use of the managed version of kzalloc platform x86 Kconfig: Refer to the laptop list in the Compal driver help Documentation: Add list of laptop models supported by the Compal driver ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11 asus-wmi: Set WAPF to 4 for Asus X550CA alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status alienware-wmi: Update WMAX brightness method limit to 15 pvpanic: Set high notifier priority platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models. toshiba_acpi: Add alternative keymap support for Satellite M840 platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check
2014-06-10hp-wmi: Enable hotkeys on some systemsKyle Evans
This is a third attempt to enable these buttons. The new variable being commit 997daa1bd9aca412ab97955a35b26c460c0ec7a4 (i.e. hp-wmi: detect "2009 BIOS or later"). Older systems that do not have the 2009 BIOS query method respond with a dummy value, in this case 4. Using that, we can target a fairly narrow group of systems. i.e. old enough to not have HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9. This group may be further limited if some systems respond with something other than 4 to non-existant feature queries. Signed-off-by: Kyle Evans <kvans32@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540Hans de Goede
The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12 keys should be mapped to: control-panel, search, show-all-windows and Computer. These keys generate the sofar unused 28 - 31 hotkey scancodes. For the first 2 this nicely matches the icons on the keys, for the latter 2 the icons are somewhat creative, which is why I ended up looking them up in the user manual. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI ↵Pali Rohár
SMO8800/SMO8810) This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which can be found on Dell Latitude laptops. Driver register /dev/freefall misc device which has same interface as driver hp_accel freefall driver. So any existing applications for HP freefall sensor /dev/freefall will work for with this new driver for Dell Latitude laptops too. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: Sonal Santan <sonal.santan@gmail.com> Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-By: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10ideapad_laptop: Introduce the use of the managed version of kzallocHimangi Saraogi
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The label sysfs_failed is removed as it is no longer required. Also, linux/device.h is added to make sure the devm_*() routine declarations are unambiguously available. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10platform/x86: Fix run-time dependencies of OLPC driversJean Delvare
Let the xo15-ebook driver depend on OLPC as all other OLPC drivers already do. Add COMPILE_TEST as an alternative for both xo1-rfkill and xo15-ebook, to increase the build testing coverage. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10platform: x86: asus-wmi.c: Cleaning up uninitialized variablesRickard Strandqvist
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10ix86/mid/thermal: Introduce the use of the managed version of kzallocHimangi Saraogi
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10platform x86 Kconfig: Refer to the laptop list in the Compal driver helpIsmael Luceno
Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10Documentation: Add list of laptop models supported by the Compal driverIsmael Luceno
Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11Hans de Goede
The Lenovo Yoga 2 11 always reports everything as blocked, causing userspace to not even try to use the wlan / bluetooth even though they work fine. Note this patch also removes the "else priv->rfk[i] = NULL;" bit of the rfkill initialization, it is not necessary as the priv struct is allocated with kzalloc. Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10asus-wmi: Set WAPF to 4 for Asus X550CAAndreas Utterberg
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational. Signed-off-by: Andreas Utterberg <andreas.utterberg@thundera.se> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable statusMario Limonciello
Since there are now multiple HDMI attributes associated with the WMAX method, create a sysfs group for them instead. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-10Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge leftovers from Andrew Morton: "A few leftovers: ocfs2, gcov, RTC" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rtc: s5m: consolidate two device type switch statements rtc: s5m: add support for S2MPS14 RTC rtc: s5m: support different register layout rtc: s5m: use shorter time of register update rtc: s5m: remove undocumented time init on first boot mfd/rtc: sec/s5m: rename SEC* symbols to S5M gcov: add support for GCC 4.9 ocfs2/o2net: incorrect to terminate accepting connections loop upon rejecting an invalid one
2014-06-10rtc: s5m: consolidate two device type switch statementsKrzysztof Kozlowski
In probe the configuration of driver for different chipsets was done in two switch (pdata->device_type) statements. Consolidate them into one switch statement to increase code readability. Additionally check the return value of regmap_irq_get_virq and exit probe on error. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: add support for S2MPS14 RTCKrzysztof Kozlowski
Add support for S2MPS14 to the rtc-s5m driver. Differences in S2MPS14 (in comparison to S5M8767): - Layout of registers - Lack of century support for time and alarms (7 registers used for storing time/alarm) - Two buffer control registers: WUDR and RUDR - No register for enabling writing time - RTC interrupts are reported in main PMIC I2C device Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: support different register layoutKrzysztof Kozlowski
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Add a map of registers used by the driver which differ between the chipsets (S5M876X and S2MPS14). 2. Move code of checking for alarm pending to separate function. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: use shorter time of register updateKrzysztof Kozlowski
Set the time needed for updating alarm and time registers to 0.45 ms. The default is 7.32 ms which is too long and leads to warnings when setting alarm or time: s5m-rtc: waiting for UDR update, reached max number of retries Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: remove undocumented time init on first bootKrzysztof Kozlowski
Remove the code for initializing time if this is first boot. The code for detecting first boot uses undocumented field RTC_TCON in RTC_UDR_CON register. According to S5M8767's datasheet this field is reserved. On S2MPS14 it is not documented at all. On device first boot the registers will be initialized with reset value (2000-01-01 00:00:00). The code might work on S5M8763 but still this does not look like a task for RTC driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10mfd/rtc: sec/s5m: rename SEC* symbols to S5MKrzysztof Kozlowski
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Rename SEC* symbols to S5M. 2. Add S5M prefix to some of defines which are different between S5M876X and S2MPS14. This is only a rename-like patch, new code is not added. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10gcov: add support for GCC 4.9Yuan Pengfei
This patch handles the gcov-related changes in GCC 4.9: A new counter (time profile) is added. The total number is 9 now. A new profile merge function __gcov_merge_time_profile is added. See gcc/gcov-io.h and libgcc/libgcov-merge.c For the first change, the layout of struct gcov_info is affected. For the second one, a dummy function is added to kernel/gcov/base.c similarly. Signed-off-by: Yuan Pengfei <coolypf@qq.com> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10ocfs2/o2net: incorrect to terminate accepting connections loop upon ↵Tariq Saeed
rejecting an invalid one When o2net-accept-one() rejects an illegal connection, it terminates the loop picking up the remaining queued connections. This fix will continue accepting connections till the queue is emtpy. Addresses Orabug 17489469. Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com> Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10decode_stacktrace: make stack dump output useful againSasha Levin
Right now when people try to report issues in the kernel they send stack dumps to eachother, which looks something like this: [ 6.906437] [<ffffffff811f0e90>] ? backtrace_test_irq_callback+0x20/0x20 [ 6.907121] [<ffffffff84388ce8>] dump_stack+0x52/0x7f [ 6.907640] [<ffffffff811f0ec8>] backtrace_regression_test+0x38/0x110 [ 6.908281] [<ffffffff813596a0>] ? proc_create_data+0xa0/0xd0 [ 6.908870] [<ffffffff870a8040>] ? proc_modules_init+0x22/0x22 [ 6.909480] [<ffffffff810020c2>] do_one_initcall+0xc2/0x1e0 [...] However, most of the text you get is pure garbage. The only useful thing above is the function name. Due to the amount of different kernel code versions and various configurations being used, the kernel address and the offset into the function are not really helpful in determining where the problem actually occured. Too often the result of someone looking at a stack dump is asking the person who sent it for a translation for one or more 'addr2line' translations. Which slows down the entire process of debugging the issue (and really annoying). The decode_stacktrace script is an attempt to make the output more useful and easy to work with by translating all kernel addresses in the stack dump into line numbers. Which means that the stack dump would look like this: [ 635.148361] dump_stack (lib/dump_stack.c:52) [ 635.149127] warn_slowpath_common (kernel/panic.c:418) [ 635.150214] warn_slowpath_null (kernel/panic.c:453) [ 635.151031] _oalloc_pages_slowpath+0x6a/0x7d0 [ 635.152171] ? zone_watermark_ok (mm/page_alloc.c:1728) [ 635.152988] ? get_page_from_freelist (mm/page_alloc.c:1939) [ 635.154766] __alloc_pages_nodemask (mm/page_alloc.c:2766) It's pretty obvious why this is better than the previous stack dump before. Usage is pretty simple: ./decode_stacktrace.sh [vmlinux] [base path] Where vmlinux is the vmlinux to extract line numbers from and base path is the path that points to the root of the build tree, for example: ./decode_stacktrace.sh vmlinux /home/sasha/linux/ < input.log > output.log The stack trace should be piped through it (I, for example, just pipe the output of the serial console of my KVM test box through it). Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10Merge tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: - massive cleanup of the NFS read/write code by Anna and Dros - support multiple NFS read/write requests per page in order to deal with non-page aligned pNFS striping. Also cleans up the r/wsize < page size code nicely. - stable fix for ensuring inode is declared uptodate only after all the attributes have been checked. - stable fix for a kernel Oops when remounting - NFS over RDMA client fixes - move the pNFS files layout driver into its own subdirectory" * tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits) NFS: populate ->net in mount data when remounting pnfs: fix lockup caused by pnfs_generic_pg_test NFSv4.1: Fix typo in dprintk NFSv4.1: Comment is now wrong and redundant to code NFS: Use raw_write_seqcount_begin/end int nfs4_reclaim_open_state xprtrdma: Disconnect on registration failure xprtrdma: Remove BUG_ON() call sites xprtrdma: Avoid deadlock when credit window is reset SUNRPC: Move congestion window constants to header file xprtrdma: Reset connection timeout after successful reconnect xprtrdma: Use macros for reconnection timeout constants xprtrdma: Allocate missing pagelist xprtrdma: Remove Tavor MTU setting xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting xprtrdma: Reduce the number of hardway buffer allocations xprtrdma: Limit work done by completion handler xprtrmda: Reduce calls to ib_poll_cq() in completion handlers xprtrmda: Reduce lock contention in completion handlers xprtrdma: Split the completion queue xprtrdma: Make rpcrdma_ep_destroy() return void ...
2014-06-10Merge tag 'mmc-updates-for-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.16: Core: - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v - if card init at 3.3v doesn't work, try 1.8v and 1.2v too Drivers: - moxart: New driver for MOXA ART SoCs - rtsx_usb_sdmmc: New driver for Realtek USB card readers - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support - sunxi: New driver for Allwinner sunxi SoCs - usdhi6rol0: New driver for Renesas SD/SDIO controller" * tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits) mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller mmc: sdhci-of-esdhc: Fixup compile error mmc: tegra: fix reporting of base clock frequency mmc: tegra: disable UHS modes mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler MAINTAINERS: mmc: Add path to git tree mmc: dove: fix missing MACH_DOVE dependency mmc: sdhci: SD tuning is broken for some controllers mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support mmc: omap_hsmmc: split omap-dma header file mmc: omap_hsmmc: fix cmd23 multiblock read/write mmc: omap_hsmmc: use devm_ioremap_resource mmc: omap_hsmmc: use devm_request_threaded_irq mmc: omap_hsmmc: use devm_request_irq mmc: omap_hsmmc: use devm_clk_get mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value mmc: omap: Use DIV_ROUND_UP instead of open coded ...
2014-06-10fs,userns: Change inode_capable to capable_wrt_inode_uidgidAndy Lutomirski
The kernel has no concept of capabilities with respect to inodes; inodes exist independently of namespaces. For example, inode_capable(inode, CAP_LINUX_IMMUTABLE) would be nonsense. This patch changes inode_capable to check for uid and gid mappings and renames it to capable_wrt_inode_uidgid, which should make it more obvious what it does. Fixes CVE-2014-4014. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Chinner <david@fromorbit.com> Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10Btrfs: convert smp_mb__{before,after}_clear_bitChris Mason
The new call is smp_mb__{before,after}_atomic. The __ gives us extra protection from the atomic rays. Signed-off-by: Chris Mason <clm@fb.com>
2014-06-10x86: intel-mid: add watchdog platform code for MerrifieldDavid Cohen
This patch adds platform code for Intel Merrifield. Since the watchdog is not part of SFI table, we have no other option but to manually register watchdog's platform device (argh!). Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: add Intel MID watchdog driver supportDavid Cohen
Add initial Intel MID watchdog driver support. This driver is an initial implementation of generic Intel MID watchdog driver. Currently it supports Intel Merrifield platform. Signed-off-by: Eric Ernst <eric.ernst@intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()Viresh Kumar
Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it. Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: <stable@vger.kernel.org> # 2.6.36+
2014-06-10booke/watchdog: refine and clean up the codesTang Yuantian
Basically, this patch does the following: 1. Move the codes of parsing boot parameters from setup-common.c to driver. In this way, code reader can know directly that there are boot parameters that can change the timeout. 2. Make boot parameter 'booke_wdt_period' effective. currently, when driver is loaded, default timeout is always being used in stead of booke_wdt_period. 3. Wrap up the watchdog timeout in device struct and clean up unnecessary codes. Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Li Yang <leoli@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: iop_wdt only builds for mach-iop13xxArnd Bergmann
All three iop variants we support in Linux (iop32x, iop33x and iop13xx) seem to have support for the watchdog hardware, but this driver fails to build for the first two of these because it uses the IOP13XX_WDTCR_IB_RESET macro that is only defined for iop13xx. This clarifies the dependency in Kconfig to avoid randconfig build errors. It is unlikely that anyone will ever miss support for this driver on the ancient iop3xx platforms, so we don't need to bother trying to fix it properly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2014-06-10watchdog: Remove drivers for W83697HF and W83697UGGuenter Roeck
Since both chips are now supported by the w83627hf watchdog driver, the chip specific drivers are no longer needed and can be removed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: w83627hf_wdt: Add early_disable module parameterGuenter Roeck
Add early_disable module parameter to match functionality previously available in the w83697hf_wdt driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10ARM: mvebu: Add A375/A380 watchdog binding documentationEzequiel Garcia
This commit documents the new support for "marvell,armada-{375,380}-wdt" compatible strings and the extra 'reg' entry requirement. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Add Armada 375/380 SoC supportEzequiel Garcia
This commit adds support for the Armada 375 and Armada 380 SoCs. This SoC variant has a second RSTOUT register, in addition to the already existent, which is shared with the system-controller. To handle this RSTOUT, we introduce a new MMIO register 'rstout_mask' to be required on 'armada-{375,380}-watchdog' new compatible string. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC enabled() functionEzequiel Garcia
In order to support other SoCs, it's needed to have a different enabled() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC stop() functionEzequiel Garcia
In order to support other SoCs, it's needed to have a different stop() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Remove unneeded atomic accessEzequiel Garcia
The RSTOUT register on the Armada 370 SoC variant is a dedicated register (not shared across orthogonal subsystems) and so it's not needed to write it atomically. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce a SoC-specific RSTOUT mappingEzequiel Garcia
Separate the RSTOUT register mapping for the different compatible strings supported by the driver. This allows to use devm_ioremap on SoC variants that share the RSTOUT register, and devm_ioremap_resource (which requests the MMIO region) on SoCs that have a dedicated RSTOUT register. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Move the register ioremap'ing to its own functionEzequiel Garcia
Follow-up patches will extend the registers ioremap and request to handle SoC-specific quirks on the RSTOUT register. Therefore, in order to keep the code readable, this commit introduces a special function for this. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: xilinx: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to watchdog core apiAnatolij Gustschin
Convert the imx2_wdt driver to the new watchdog core api. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to use regmap API.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ IMX2+ LE LE Vybird LE LE LS1 LE BE LS2 LE LE Other possible SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ Soc1 BE BE Soc2 BE LE And also the watchdog's registers will be 32-bits for some versions, and though it is 16-bits in IMX2+, Vybird and LS+. Using the regmap APIs, could be more easy to support different endianness and also more easy to support 32-bits version... Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>