path: root/arch/arm/mach-omap1/serial.c
AgeCommit message (Collapse)Author
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <>
2010-12-10omap1: Add initcall checks for omap1 and booted boardTony Lindgren
Otherwise multi-omap1 configurations will fail. Tested-by: Janusz Krzysztofik <> Signed-off-by: Tony Lindgren <>
2010-11-30Merge branches 'devel-cleanup', 'devel-serial' and 'devel-board' into ↵Tony Lindgren
2010-11-30OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbersAndrei Emeltchenko
Define MDR1 register serial definitions used in serial and bluetooth drivers. Change magic number to ones defined in serial_reg for omap1/2 serial driver. Remove redefined MDR1 register definitions in omap-serial driver. Signed-off-by: Andrei Emeltchenko <> Acked-by: G, Manjunath Kondaiah <> Acked-by: Govindraj.R <> Acked-by: Greg Kroah-Hartman <> Signed-off-by: Tony Lindgren <>
2010-11-24arm: omap1: add missing includesAaro Koskinen
Add missing includes to get rid of the following sparse warnings: arch/arm/mach-omap1/devices.c:225:13: warning: symbol 'omap1_camera_init' was not declared. Should it be static? arch/arm/mach-omap1/flash.c:15:6: warning: symbol 'omap1_set_vpp' was not declared. Should it be static? arch/arm/mach-omap1/serial.c:190:6: warning: symbol 'omap_serial_wake_trigger' was not declared. Should it be static? arch/arm/mach-omap1/time.c:252:18: warning: symbol 'omap_timer' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <> Signed-off-by: Tony Lindgren <>
2010-08-02omap1: omap7xx clocks, mux, serial fixesCory Maccarrone
This change adds in the necessary clocks and mux pins for UART control on omap7xx devices. I also made a change in the serial code to only try and initialize two UARTs in omap_serial_init, as these devices don't have three. Signed-off-by: Cory Maccarrone <> Signed-off-by: Tony Lindgren <>
2010-02-15omap: Clean the serial port definesTony Lindgren
This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <>
2009-11-22omap: Eliminate OMAP_MAX_NR_PORTSAlexander Shishkin
Eliminate OMAP_MAX_NR_PORTS Note that also the null terminator entry for omap1 serial_platform_data needs to be now removed to avoid oopsing. Note that mach-omap1 uses struct plat_serial8250_port array, which requires a null terminator at the end, and that's why we need to use ARRAY_SIZE - 1. This is not needed on mach-omap2 as the array used is struct omap_uart_state, and does not use a null terminator. Signed-off-by: Alexander Shishkin <> Acked-by: Kevin Hilman <> Signed-off-by: Ladislav Michl <> Signed-off-by: Tony Lindgren <>
2009-11-10Merge branch '7xx-iosplit-plat' with omap-fixesTony Lindgren
2009-10-22omap1: Fix redundant UARTs pin muxing that can break other hardware supportJanusz Krzysztofik
Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart and OMAP_TAG_UART. This works for mach-omap2, but causes issues on mach-omap1 for some boards as the mach-omap1 serial.c was muxing pins based on the enabled_uart flag for 15xx. Fix this by muxing pins in board-*.c files for the 15xx boards for the uart ports that had enabled_uart flag set before the commit above. Tested on Amsdtrad Delta only. Note that in the future we should add support for powering down the uarts with a timer like mach-omap2/serial.c does. Otherwise the enabled uarts will be blocking retention-while-idle. Signed-off-by: Janusz Krzysztofik <> Signed-off-by: Tony Lindgren <>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <>
2009-10-16omap: Change low-level serial init to use ioremapTony Lindgren
Change low-level serial init to use ioremap Signed-off-by: Tony Lindgren <>
2009-10-07OMAP7XX: Replace omap730 references in irqs.h and all usersAlistair Buxton
This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Turns INT_730_* to INT_7XX_* for definitions in irqs.h and all users. Signed-off-by: Alistair Buxton <> Reviewed-by: Zebediah C. McClure <>
2009-10-07OMAP7XX: Serial: Remove duplicate omap850 codeAlistair Buxton
This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton <> Reviewed-by: Zebediah C. McClure <>
2009-08-28OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idleKalle Valo
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <> Signed-off-by: Kevin Hilman <> Signed-off-by: Tony Lindgren <>
2009-08-28OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS insteadTony Lindgren
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros. Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE. In the long run, most code should use ioremap + __raw_read/write instead. Signed-off-by: Tony Lindgren <>
2009-05-28OMAP1: PM: update and decouple from OMAP2/3 PM coreKevin Hilman
Update OMAP1-specific PM infrastructure. This is a sync of what is in linux-omap for OMAP1. This mostly de-couples OMAP1 PM from OMAP2/3 PM and renames things accordingly, and removes omap2/3 specific code from OMAP1 specific headers. Original OMAP1 decoupling patch for OMAP PM branch by Paul Walmsley. Cc: Paul Walmsley <> Signed-off-by: Kevin Hilman <>
2009-03-23[OMAP850] Changes to base IO subsystem, v2Zebediah C. McClure
Changes to base IO subsystem. Signed-off-by: Zebediah C. McClure <> Signed-off-by: Tony Lindgren <>
2008-12-10ARM: OMAP: Switch to gpio_request/free callsJarkko Nikula
Switch to gpio_request/free calls Signed-off-by: Jarkko Nikula <> Signed-off-by: Tony Lindgren <>
2008-12-10ARM: OMAP: use gpio_to_irqDavid Brownell
Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead. Calls used for table initialization are left alone, at least this time around. (This patch is for code in both the OMAP tree and mainline.) Signed-off-by: David Brownell <> Signed-off-by: Tony Lindgren <>
2008-12-10ARM: OMAP: switch to gpio_direction_inputDavid Brownell
More switchover to the cross-platform GPIO interface: use gpio_direction_input(), not an OMAP-specific call. Signed-off-by: David Brownell <> Signed-off-by: Tony Lindgren <>
2008-10-14Merge branch 'omap-all' into develRussell King
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <>
2008-09-05[ARM] omap: Fix IO_ADDRESS() macrosRussell King
OMAP1_IO_ADDRESS(), OMAP2_IO_ADDRESS() and IO_ADDRESS() returns cookies for use with __raw_{read|write}* for accessing registers. Therefore, these macros should return (void __iomem *) cookies, not integer values. Doing this improves typechecking, and means we can find those places where, eg, DMA controllers are incorrectly given virtual addresses to DMA to, or physical addresses are thrown through a virtual to physical address translation. Signed-off-by: Russell King <>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <>
2007-03-02ARM: OMAP: OMAP310 SerialMarek Vašut
This makes serial usable also on omap310, not only 1510. (changing 1510->15xx) Signed-off-by: Marek Vašut <> Signed-off-by: Tony Lindgren <>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <> Signed-off-by: Adrian Bunk <>
2006-07-02[PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <> Signed-off-by: Linus Torvalds <>
2006-07-01[ARM] 3693/1: ARM: Convert omap1 to generic irq handlingThomas Gleixner
Patch from Thomas Gleixner From: Thomas Gleixner <> Fixup the conversion to generic irq subsystem. Signed-off-by: Thomas Gleixner <> Signed-off-by: Ingo Molnar <> Signed-off-by: Russell King <>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <> Signed-off-by: Adrian Bunk <>
2006-04-02[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2Tony Lindgren
Patch from Tony Lindgren Update misc OMAP core code from linux-omap tree: - McBSP updates by Samuel Ortiz, Andrzej Zaborowski - Whitespace cleanups by Ladislav Michl - Other fixes by various linux-omap developers Signed-off-by: Tony Lindgren <> Signed-off-by: Russell King <>
2006-01-17ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable miscTony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <>
2006-01-08[PATCH] IRQ type flagsRussell King
Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <>
2005-11-10[ARM] 3141/1: OMAP 1/5: Update omap1 specific filesTony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Omap1 serial pport and framebuffer init updates by Imre Deak - Add support for omap310 processor and Palm Tungsten E PDA by Laurent Gonzales, Romain Goyet, et al. Omap310 and omap1510 processors are now handled as omap15xx. - Omap1 specific changes to shared omap clock framework by Tony Lindgren - Omap1 specific changes to shared omap pin mux framework by Tony Lindgren - Other misc fixes, such as update memory timings for smc91x, omap1 specific device initialization etc. Signed-off-by: Tony Lindgren <> Signed-off-by: Russell King <>
2005-09-08Merge Linus Torvalds
2005-09-08[ARM] 2890/1: OMAP 1/4: Update omap1 specific files, take 2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Convert more drivers to register resources in board-*.c to take advantage of the driver model by David Brownell and Ladislav Michl - Use set_irq_type() for GPIO interrupts instead of omap_set_gpio_edge_ctrl() by David Brownell - Add minimal support for handling optional add-on boards, such as OSK Mistral board with LCD and keypad, by David Brownell - Minimal support for loading functions to SRAM by Tony Lindgren - Wake up from serial port by muxing RX lines temporarily into GPIO interrupts by Tony Lindgren - 32KHz sched_clock by Tony Lindgren and Juha Yrjola Signed-off-by: Tony Lindgren <> Signed-off-by: Russell King <>
2005-09-08[SERIAL] Use an enum for serial8250 platform device IDsRussell King
Rather than hard-coding the platform device IDs, enumerate them. We don't particularly care about the actual ID we get, just as long as they're unique. Signed-off-by: Russell King <>
2005-07-10[PATCH] ARM: 2801/1: OMAP update 6/11: Split OMAP1 common code into id, io ↵Tony Lindgren
and serial Patch from Tony Lindgren This patch by Juha Yrjölä and other OMAP developers splits OMAP1 specific common code into OMAP1 id, io, and serial code in mach-omap1 directory. Signed-off-by: Tony Lindgren <> Signed-off-by: Russell King <>