summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2013-04-09ARM: shmobile: Add second I/O range for r8a7790 PFCMagnus Damm
Add the GPIO I/O memory range to the r8a7790 PFC device. This extra I/O memory range is needed when using the PFC tables to drive both pin functions (using PINCTRL or function GPIO for old code) and actual GPIO. The goal is however to use a separate GPIO driver in the long run and when that happens this extra I/O memory range can be removed. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7790 PFC supportMagnus Damm
Add a platform device for the r8a7790 PFC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7790 IRQC supportMagnus Damm
Add IRQC interrupt controller support to r8a7790 by hooking up a single IRQC instances to handle 4 external IRQ signals. The IRQC controller is tied to SPIs of the GIC. On r8a7790 the external IRQ pins routing is handled by the PFC which is excluded from this patch. Both platform devices and DT devices are added in this patch. The platform device versions are used to provide a static interrupt map configuration for board code written in C. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7790 SCIF supportMagnus Damm
Add SCIF serial port support to the r8a7790 SoC by adding platform devices for SCIFA0 -> SCIFA2 as well as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF1 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: Initial r8a7790 SoC supportMagnus Damm
Add initial support for the r8a7790 SoC including: - Single Cortex-A15 CPU Core - GIC - Architecture timer No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7779: move global functions to r8a7779.hKuninori Morimoto
There is no reason each CPU's own function has to exist in common.h. r8a7779_xxx() go to r8a7779.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7740: move global functions to r8a7740.hKuninori Morimoto
There is no reason each CPU's own function has to exist in common.h. r8a7740_xxx() go to r8a7740.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh73a0: move global functions to sh73a0.hKuninori Morimoto
There is no reason each CPU's own function has to exist in common.h. sh73a0_xxx() go to sh73a0.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh7372: move global functions to sh7372.hKuninori Morimoto
There is no reason each CPU's own function has to exist in common.h. sh7372_xxx() go to sh7372.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clockKuninori Morimoto
R-Car H1 has many clocks, and it is possible to read/use clock ratio of these clocks from FRQMRx as DIV4 clocks. But, these ratio are fixed value and these are decided by MD pin status. This means that we can use fixed ratio clock via MD pin status, instead of DIV4 clocks. This patch reads MD pin status, and sets PLLA clock (= root clock), and used fixed ratio clock for other clocks. It was tesed on marzen board. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7740: use fixed ratio clockKuninori Morimoto
Current clock-r8a7740 is using own implement for each divX clocks. This patch switches to use fixed ratio clock, and was tesed on armadillo board. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7740: tidyup comment/implementation mismatchKuninori Morimoto
Current clock-r8a7740's DIV4/DIV6/MSTP implemented area and its comment are mismatching. This patch tidyup its comment/implementation area. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh73a0: use fixed ratio clockKuninori Morimoto
Current clock-sh73a0 is using own implement for each divX clocks. This patch switches to use fixed ratio clock, and was tesed on kzm9g board. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh7372: use fixed ratio clockKuninori Morimoto
Current clock-sh7372 is using own implement for each divX clocks. This patch switches to use fixed ratio clock, and was tesed on mackerel board. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: add struct clk_ratio and fixed ratio clock macroKuninori Morimoto
Renesas chip has many clocks inside, and some of them are using fixed ratio via parent clock. Current shmobile clock code is using own divX_recalc function and divX_clk_ops. This patch can reduce these code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh7372: remove DIV4_ZT* clocksKuninori Morimoto
DIV4_ZT* clocks are for debugging and trace bus clock. It is not necessary to control it from Linux/Software. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh73a0: remove DIV4_ZT* clocksKuninori Morimoto
DIV4_ZT* clocks are for debugging and trace bus clock. It is not necessary to control it from Linux/Software. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh73a0: add a TWD clockGuennadi Liakhovetski
Add a TWD clock on sh73a0 for the smp_twd driver to properly update the clock's frequency upon cpufreq events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7740: Migrate from INTC to GICBastian Hecht
With the added capabilty of the intc_irqpin driver to handle shared external IRQs, all prerequisites are fulfilled and we are ready to migrate completely to GIC. This includes the following steps: - Kconfig: select ARM_GIC and RENESAS_INTC_IRQPIN - intc-r8a7740: Throw out all legacy INTC code and init the GIC. We need to mask out all shared IRQs as it is needed by the shared intc_irqpin driver. - setup-r8a7740: Add 4 irqpin devices to handle external IRQs and update all IRQ numbers to point to the GIC SPI. - board-armadillo: Update all IRQ numbers to point to the GIC SPI. - pfc-r8a7740: Update all IRQ numbers of the GPIOs to point to the GIC SPI. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a73a4: add thermal driver supportKuninori Morimoto
You can get current thermal by > cat /sys/class/thermal/thermal_zone?/temp Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a7778 SCIF supportKuninori Morimoto
Add SCIF serial port support to the r8a7778 SoC by adding platform devices together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: add R8A7778 basis supportKuninori Morimoto
Add initial support for the R8A7778 R-Car M1A SoC. No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. It is based on v1.0 datasheet Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: sh73a0: wait for completion when kicking the clockGuennadi Liakhovetski
To reconfigure clocks, controlled by FRQCRA and FRQCRB, a kick bit has to be set and to make sure the setting has taken effect, it has to be read back repeatedly until it is cleared by the hardware. This patch adds the waiting part, that was missing until now. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a73a4 PFC supportMagnus Damm
Add a platform device for the r8a73a4 PFC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a73a4 IRQC support V2Magnus Damm
Add IRQC interrupt controller support to r8a73a4 by hooking up two IRQC instances to handle 58 external IRQ signals. There IRQC controllers are tied to SPIs of the GIC. On r8a73a4 exact IRQ pin routing is handled by the PFC which is excluded from this patch. Both platform devices and DT devices are added in this patch. The platform device versions are used to provide a static interrupt map configuration for board code written in C. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a73a4 SCIF support V3Magnus Damm
V3 of SCIF serial port support for the r8a73a4 SoC. This is done by adding platform devices for SCIFA0 -> SCIFA1 as well as SCIFB0 -> SCIFB3 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: Initial r8a73a4 SoC support V3Magnus Damm
V3 of initial support for the r8a73a4 SoC including: - Single Cortex-A15 CPU Core - GIC - Architecture timer No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: Make r8a7779 INTC irqpin platform data staticMagnus Damm
The platform data for the INTC irq pin driver seems to be global symbols, make it static to allow multi-soc build. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: Make sh73a0 INTC irqpin platform data staticMagnus Damm
The platform data for the INTC irq pin driver seems to be global symbols, make it static to allow multi-soc build. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: INTC External IRQ pin driver on r8a7779Magnus Damm
Update the r8a7779 IRQ code to make use of the INTC External IRQ pin driver for external interrupt pins IRQ0 -> IRQ3. The r8a7779 SoC can like older SH SoCs configure to use the IRQ0 -> IRQ3 signals as individual interrupts or a combined IRL mode. Without this patch the r8a7779 SoC code does not fully support external IRQ pins in individual IRQ mode. The r8a7779 PFC code does not yet have gpio_to_irq() support so no need to update such code. At this point the DT reference implementations are not covered. In the future such code shall tie in the INTC External IRQ pin driver via DT, so this kind of verbose code is not needed for the long term DT case. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: INTC External IRQ pin driver on sh73a0Magnus Damm
Adjust the sh73a0 IRQ code to make use of the INTC External IRQ pin driver for external interrupt pins IRQ0 -> IRQ31. This removes quite a bit of special-case code in intc-sh73a0.c but the number of lines get replaced with platform device information in setup-sh73a0.c. The PFC code is also adjusted to make gpio_to_irq() return the correct interrupt number. At this point the DT reference implementations are not covered. In the future such code shall tie in the INTC External IRQ pin driver via DT, so this kind of verbose code is not needed for the long term DT case. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: irq_pin() for static IRQ pin assignmentMagnus Damm
Add the macro irq_pin() to let board-specific code using platform devices tie in external IRQn pins in a common way. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18r8a7779: Add Display Unit clock supportPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> [Rename device from to rcarfb to rcar-du] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Manual conflict resolution] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resourceSergei Shtylyov
Commit "ARM: shmobile: r8a7779: use gic_iid macro" switched R8A7779 platform devices to using gic_iid() macro instead of gic_spi() but commit "ARM: mach- shmobile: r8a7779: add SATA support" added another use of gic_spi(). Convert the SATA IRQ resource to using gic_iid(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: mach-shmobile: r8a7779: add SATA supportVladimir Barinov
Add SATA clock for r8a7779 SoC (for both device tree and usual cases). Register SATA controller as a "late" platform device on r8a7779 SoC. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: tidyup chip series definition order for r8a7740/r8a7779Kuninori Morimoto
move r8a7740_meram_workaround() to r8a7740 area from r8a7779 area Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: r8a7779: use gic_iid macroKuninori Morimoto
"ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID" enabled to use gic_iid macro. This patch exchange current GIC interrupt setting from gic_spi() to gic_iid() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [ horms+renesas@verge.net.au: Updated git commit id in changelog ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: r8a7779: fixup DT machine nameKuninori Morimoto
r8a7779 is not sh73a0 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: add gic_iid macro for ICCIAR / interrupt IDKuninori Morimoto
R-Car H1 datasheet GIC number is indicating GIC ICCIAR / interrupt ID number, not SPI number, but current marzen board code is using gic_spi() with un-understandable calculation. This patch adds new gic_iid() macro which means ICCIAR / interrupt ID, and used the number currently written on datasheet. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [ horms+renesas@verge.net.au: Split board-marzen.c portion into a separate patch ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: mach-shmobile: r8a7740: Add DT names to clock listBastian Hecht
This adds temporarily the alternative device names to the clock list that are used when booting via Device Tree setup. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Remove unused hotplug.cMagnus Damm
Each CPU Hotplug implementation for mach-shmobile is now self-contained, so this change removes unused helper code in hotplug.c. The two CPU Hotplug capable SoCs sh73a0 and r8a7779 remain unchanged. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Rearrange r8a7779 cpu hotplug codeMagnus Damm
Update the r8a7779 SMP code and CPU Hotplug in particular to follow the same style as sh73a0. This means dropping __maybe_unused for #ifdef CONFIG_HOTPLUG_CPU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Use sh73a0-specific cpu disable codeMagnus Damm
Convert the sh73a0 CPU Hotplug code to use a local implementation of ->cpu_disable(). With this change in place the sh73a0 SMP code does no longer depend on hotplug.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Update r8a7779 to use scu_power_mode()Magnus Damm
Update the SMP code for R8A7779 to make use of the shared SCU function scu_power_mode() together with the early setup code in shmobile_secondary_vector_scu. With this patch in place the secondary CPUs modify the SCU setting during early boot instead of letting other CPUs deal with the coherency setting before boot. In other words, we used to setup coherency before boot in r8a7779_boot_secondary() but that bit is now instead handled by the code in shmobile_secondary_vector_scu. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Update r8a7779 to check SCU for hotplugMagnus Damm
Update the r8a7779 CPU Hotplug code to use SCU PSR to wait for the target CPU core. Previously the shared code in hotplug.c was used to let cpu_kill() wait for cpu_die(). With this change in place the r8a7779 SMP code does not depend on hotplug.c anymore. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Use R8A7779_SCU_BASE with TWDMagnus Damm
Rework the IOMEM() usage for the SCU base address in the case of r8a7779. Adjusts the TWD to use R8A7779_SCU_BASE. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Rework SH73A0_SCU_BASE IOMEM() usageMagnus Damm
Rework the IOMEM() usage for the SCU base address in the case of sh73a0. Removes recently introduced build warnings: arch/arm/mach-shmobile/smp-sh73a0.c:45:15: warning: initialization makes integer from pointer without a cast [enabled by default] arch/arm/mach-shmobile/smp-sh73a0.c:45:15: warning: (near initialization for 'twd_local_timer.res[0].start') [enabled by default] arch/arm/mach-shmobile/smp-sh73a0.c:45:15: warning: initialization makes integer from pointer without a cast [enabled by default] /arch/arm/mach-shmobile/smp-sh73a0.c:45:15: warning: (near initialization for 'twd_local_timer.res[0].end') [enabled by default] Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: Fix base address readout in headsmp-scu.SMagnus Damm
Rework the early SCU setup code in headsmp-scu.S to read the base address in the same way as we use to fetch the address of the invalidation function. Reported-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: r8a7779: Do not initialise i2c as an early deviceSimon Horman
It is sufficient to initialise i2c as a late device. Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13ARM: shmobile: r8a7779: Do not use early devices with DT referenceSimon Horman
Do not initialise any early devices when using the minimal DT reference code. Only the delay needs to be initialised. Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>