summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-09-14ARM: at91: dt: sam9260: add i2c gpio pinctrlJean-Christophe PLAGNIOL-VILLARD
commit f89ae61bd74ae195c464bdd97a134e30908884d5 upstream. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14crypto: xor - Check for osxsave as well as avx in crypto/xorJohn Haxby
commit edb6f29464afc65fc73767540b854abf63ae7144 upstream. This affects xen pv guests with sufficiently old versions of xen and sufficiently new hardware. On such a system, a guest with a btrfs root won't even boot. Signed-off-by: John Haxby <john.haxby@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Michael Marineau <michael.marineau@coreos.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07xen/arm: missing put_cpu in xen_percpu_initJulien Grall
commit 0d7febe58413884f6428143221971618fbf3a47d upstream. When CONFIG_PREEMPT is enabled, Linux will not be able to boot and warn: [ 4.127825] ------------[ cut here ]------------ [ 4.133376] WARNING: at init/main.c:699 do_one_initcall+0x150/0x158() [ 4.140738] initcall xen_init_events+0x0/0x10c returned with preemption imbalance This is because xen_percpu_init uses get_cpu but doesn't have the corresponding put_cpu. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAMYinghai Lu
commit 527bf129f9a780e11b251cf2467dc30118a57d16 upstream. Dave Hansen reported that systems between 500G and 600G RAM crash early if DEBUG_PAGEALLOC is selected. > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x02086000, 0x02086fff] PGTABLE > [ 0.000000] BRK [0x02087000, 0x02087fff] PGTABLE > [ 0.000000] BRK [0x02088000, 0x02088fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0xe80ee00000-0xe80effffff] > [ 0.000000] [mem 0xe80ee00000-0xe80effffff] page 4k > [ 0.000000] BRK [0x02089000, 0x02089fff] PGTABLE > [ 0.000000] BRK [0x0208a000, 0x0208afff] PGTABLE > [ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory It turns out that we missed increasing needed pages in BRK to mapping initial 2M and [0,1M) when we switched to use the #PF handler to set memory mappings: > commit 8170e6bed465b4b0c7687f93e9948aca4358a33b > Author: H. Peter Anvin <hpa@zytor.com> > Date: Thu Jan 24 12:19:52 2013 -0800 > > x86, 64bit: Use a #PF handler to materialize early mappings on demand Before that, we had the maping from [0,512M) in head_64.S, and we can spare two pages [0-1M). After that change, we can not reuse pages anymore. When we have more than 512M ram, we need an extra page for pgd page with [512G, 1024g). Increase pages in BRK for page table to solve the boot crash. Reported-by: Dave Hansen <dave.hansen@intel.com> Bisected-by: Dave Hansen <dave.hansen@intel.com> Tested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1376351004-4015-1-git-send-email-yinghai@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07powerpc: Don't Oops when accessing /proc/powerpc/lparcfg without hypervisorBenjamin Herrenschmidt
commit f5f6cbb61610b7bf9d9d96db9c3979d62a424bab upstream. /proc/powerpc/lparcfg is an ancient facility (though still actively used) which allows access to some informations relative to the partition when running underneath a PAPR compliant hypervisor. It makes no sense on non-pseries machines. However, currently, not only can it be created on these if the kernel has pseries support, but accessing it on such a machine will crash due to trying to do hypervisor calls. In fact, it should also not do HV calls on older pseries that didn't have an hypervisor either. Finally, it has the plumbing to be a module but is a "bool" Kconfig option. This fixes the whole lot by turning it into a machine_device_initcall that is only created on pseries, and adding the necessary hypervisor check before calling the H_GET_EM_PARMS hypercall Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07powerpc: Work around gcc miscompilation of __pa() on 64-bitPaul Mackerras
commit bdbc29c19b2633b1d9c52638fb732bcde7a2031a upstream. On 64-bit, __pa(&static_var) gets miscompiled by recent versions of gcc as something like: addis 3,2,.LANCHOR1+4611686018427387904@toc@ha addi 3,3,.LANCHOR1+4611686018427387904@toc@l This ends up effectively ignoring the offset, since its bottom 32 bits are zero, and means that the result of __pa() still has 0xC in the top nibble. This happens with gcc 4.8.1, at least. To work around this, for 64-bit we make __pa() use an AND operator, and for symmetry, we make __va() use an OR operator. Using an AND operator rather than a subtraction ends up with slightly shorter code since it can be done with a single clrldi instruction, whereas it takes three instructions to form the constant (-PAGE_OFFSET) and add it on. (Note that MEMORY_START is always 0 on 64-bit.) Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29x86/xen: do not identity map UNUSABLE regions in the machine E820David Vrabel
commit 3bc38cbceb85881a8eb789ee1aa56678038b1909 upstream. If there are UNUSABLE regions in the machine memory map, dom0 will attempt to map them 1:1 which is not permitted by Xen and the kernel will crash. There isn't anything interesting in the UNUSABLE region that the dom0 kernel needs access to so we can avoid making the 1:1 mapping and treat it as RAM. We only do this for dom0, as that is where tboot case shows up. A PV domU could have an UNUSABLE region in its pseudo-physical map and would need to be handled in another patch. This fixes a boot failure on hosts with tboot. tboot marks a region in the e820 map as unusable and the dom0 kernel would attempt to map this region and Xen does not permit unusable regions to be mapped by guests. (XEN) 0000000000000000 - 0000000000060000 (usable) (XEN) 0000000000060000 - 0000000000068000 (reserved) (XEN) 0000000000068000 - 000000000009e000 (usable) (XEN) 0000000000100000 - 0000000000800000 (usable) (XEN) 0000000000800000 - 0000000000972000 (unusable) tboot marked this region as unusable. (XEN) 0000000000972000 - 00000000cf200000 (usable) (XEN) 00000000cf200000 - 00000000cf38f000 (reserved) (XEN) 00000000cf38f000 - 00000000cf3ce000 (ACPI data) (XEN) 00000000cf3ce000 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000630000000 (usable) Signed-off-by: David Vrabel <david.vrabel@citrix.com> [v1: Altered the patch and description with domU's with UNUSABLE regions] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29x86 get_unmapped_area: Access mmap_legacy_base through mm_struct memberRadu Caragea
commit 41aacc1eea645c99edbe8fbcf78a97dc9b862adc upstream. This is the updated version of df54d6fa5427 ("x86 get_unmapped_area(): use proper mmap base for bottom-up direction") that only randomizes the mmap base address once. Signed-off-by: Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29Revert "x86 get_unmapped_area(): use proper mmap base for bottom-up direction"Linus Torvalds
commit 5ea80f76a56605a190a7ea16846c82aa63dbd0aa upstream. This reverts commit df54d6fa54275ce59660453e29d1228c2b45a826. The commit isn't necessarily wrong, but because it recalculates the random mmap_base every time, it seems to confuse user memory allocators that expect contiguous mmap allocations even when the mmap address isn't specified. In particular, the MATLAB Java runtime seems to be unhappy. See https://bugzilla.kernel.org/show_bug.cgi?id=60774 So we'll want to apply the random offset only once, and Radu has a patch for that. Revert this older commit in order to apply the other one. Reported-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Radu Caragea <sinaelgl@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help textNicolas Pitre
commit ac124504ecf6b20a2457d873d0728a8b991a5b0c upstream. Commit f6f91b0d9fd9 ("ARM: allow kuser helpers to be removed from the vector page") introduced some help text for the CONFIG_KUSER_HELPERS option which is rather contradictory. Let's fix that, and improve it a little. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29arm64: perf: fix event validation for software group leadersWill Deacon
commit ee7538a008a45050c8f706d38b600f55953169f9 upstream. This is a port of c95eb3184ea1 ("ARM: 7809/1: perf: fix event validation for software group leaders") to arm64, which fixes a panic in the arm64 perf backend found as a result of Vince's fuzzing tool. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29arm64: perf: fix array out of bounds access in armpmu_map_hw_event()Will Deacon
commit 868f6fea8fa63f09acbfa93256d0d2abdcabff79 upstream. This is a port of d9f966357b14 ("ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()") to arm64, which fixes an oops in the arm64 perf backend found as a result of Vince's fuzzing tool. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29ARM: at91/DT: fix at91sam9n12ek memory nodeNicolas Ferre
commit a57603ca2871ee0773b00839c1ea35c4a2d3eeb0 upstream. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29ARM: davinci: nand: specify ecc strengthSekhar Nori
commit acd36357edc08649e85ff15dc4ed62353c912eff upstream. Starting with kernel v3.5, it is mandatory to specify ECC strength when using hardware ECC. Without this, kernel panics with a warning of the sort: Driver must set ecc.strength when using hardware ECC ------------[ cut here ]------------ kernel BUG at drivers/mtd/nand/nand_base.c:3519! Fix this by specifying ECC strength for the boards which were missing this. Reported-by: Holger Freyther <holger@freyther.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29x86: Don't clear olpc_ofw_header when sentinel is detectedDaniel Drake
commit d55e37bb0f51316e552376ddc0a3fff34ca7108b upstream. OpenFirmware wasn't quite following the protocol described in boot.txt and the kernel has detected this through use of the sentinel value in boot_params. OFW does zero out almost all of the stuff that it should do, but not the sentinel. This causes the kernel to clear olpc_ofw_header, which breaks x86 OLPC support. OpenFirmware has now been fixed. However, it would be nice if we could maintain Linux compatibility with old firmware versions. To do that, we just have to avoid zeroing out olpc_ofw_header. OFW does not write to any other parts of the header that are being zapped by the sentinel-detection code, and all users of olpc_ofw_header are somewhat protected through checking for the OLPC_OFW_SIG magic value before using it. So this should not cause any problems for anyone. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/20130809221420.618E6FAB03@dev.laptop.org Acked-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29ARC: [lib] strchr breakage in Big-endian configurationJoern Rennecke
commit b0f55f2a1a295c364be012e82dbab079a2454006 upstream. For a search buffer, 2 byte aligned, strchr() was returning pointer outside of buffer (buf - 1) ------------->8---------------- // Input buffer (default 4 byte aigned) char *buffer = "1AA_"; // actual search start (to mimick 2 byte alignment) char *current_line = &(buffer[2]); // Character to search for char c = 'A'; char *c_pos = strchr(current_line, c); printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_' ------------->8---------------- Reported-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Debugged-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29xen/smp: initialize IPI vectors before marking CPU onlineChuck Anderson
commit fc78d343fa74514f6fd117b5ef4cd27e4ac30236 upstream. An older PVHVM guest (v3.0 based) crashed during vCPU hot-plug with: kernel BUG at drivers/xen/events.c:1328! RCU has detected that a CPU has not entered a quiescent state within the grace period. It needs to send the CPU a reschedule IPI if it is not offline. rcu_implicit_offline_qs() does this check: /* * If the CPU is offline, it is in a quiescent state. We can * trust its state not to change because interrupts are disabled. */ if (cpu_is_offline(rdp->cpu)) { rdp->offline_fqs++; return 1; } Else the CPU is online. Send it a reschedule IPI. The CPU is in the middle of being hot-plugged and has been marked online (!cpu_is_offline()). See start_secondary(): set_cpu_online(smp_processor_id(), true); ... per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; start_secondary() then waits for the CPU bringing up the hot-plugged CPU to mark it as active: /* * Wait until the cpu which brought this one up marked it * online before enabling interrupts. If we don't do that then * we can end up waking up the softirq thread before this cpu * reached the active state, which makes the scheduler unhappy * and schedule the softirq thread on the wrong cpu. This is * only observable with forced threaded interrupts, but in * theory it could also happen w/o them. It's just way harder * to achieve. */ while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask)) cpu_relax(); /* enable local interrupts */ local_irq_enable(); The CPU being hot-plugged will be marked active after it has been fully initialized by the CPU managing the hot-plug. In the Xen PVHVM case xen_smp_intr_init() is called to set up the hot-plugged vCPU's XEN_RESCHEDULE_VECTOR. The hot-plugging CPU is marked online, not marked active and does not have its IPI vectors set up. rcu_implicit_offline_qs() sees the hot-plugging cpu is !cpu_is_offline() and tries to send it a reschedule IPI: This will lead to: kernel BUG at drivers/xen/events.c:1328! xen_send_IPI_one() xen_smp_send_reschedule() rcu_implicit_offline_qs() rcu_implicit_dynticks_qs() force_qs_rnp() force_quiescent_state() __rcu_process_callbacks() rcu_process_callbacks() __do_softirq() call_softirq() do_softirq() irq_exit() xen_evtchn_do_upcall() because xen_send_IPI_one() will attempt to use an uninitialized IRQ for the XEN_RESCHEDULE_VECTOR. There is at least one other place that has caused the same crash: xen_smp_send_reschedule() wake_up_idle_cpu() add_timer_on() clocksource_watchdog() call_timer_fn() run_timer_softirq() __do_softirq() call_softirq() do_softirq() irq_exit() xen_evtchn_do_upcall() xen_hvm_callback_vector() clocksource_watchdog() uses cpu_online_mask to pick the next CPU to handle a watchdog timer: /* * Cycle through CPUs to check if the CPUs stay synchronized * to each other. */ next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask); if (next_cpu >= nr_cpu_ids) next_cpu = cpumask_first(cpu_online_mask); watchdog_timer.expires += WATCHDOG_INTERVAL; add_timer_on(&watchdog_timer, next_cpu); This resulted in an attempt to send an IPI to a hot-plugging CPU that had not initialized its reschedule vector. One option would be to make the RCU code check to not check for CPU offline but for CPU active. As becoming active is done after a CPU is online (in older kernels). But Srivatsa pointed out that "the cpu_active vs cpu_online ordering has been completely reworked - in the online path, cpu_active is set *before* cpu_online, and also, in the cpu offline path, the cpu_active bit is reset in the CPU_DYING notification instead of CPU_DOWN_PREPARE." Drilling in this the bring-up path: "[brought up CPU].. send out a CPU_STARTING notification, and in response to that, the scheduler sets the CPU in the cpu_active_mask. Again, this mask is better left to the scheduler alone, since it has the intelligence to use it judiciously." The conclusion was that: " 1. At the IPI sender side: It is incorrect to send an IPI to an offline CPU (cpu not present in the cpu_online_mask). There are numerous places where we check this and warn/complain. 2. At the IPI receiver side: It is incorrect to let the world know of our presence (by setting ourselves in global bitmasks) until our initialization steps are complete to such an extent that we can handle the consequences (such as receiving interrupts without crashing the sender etc.) " (from Srivatsa) As the native code enables the interrupts at some point we need to be able to service them. In other words a CPU must have valid IPI vectors if it has been marked online. It doesn't need to handle the IPI (interrupts may be disabled) but needs to have valid IPI vectors because another CPU may find it in cpu_online_mask and attempt to send it an IPI. This patch will change the order of the Xen vCPU bring-up functions so that Xen vectors have been set up before start_secondary() is called. It also will not continue to bring up a Xen vCPU if xen_smp_intr_init() fails to initialize it. Orabug 13823853 Signed-off-by Chuck Anderson <chuck.anderson@oracle.com> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 oneNicolas Ferre
commit 23fb05c688a8dcb0cf6a4d8d819cffeca82e5c54 upstream. Due to a bug with RTC IMR, we cannot consider at91sam9x5 RTC compatible with the previous one. Modify DT compatibility string, even if the driver is not yet modified to take it into account. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29ARC: gdbserver breakage in Big-Endian configuration #2Vineet Gupta
[Based on mainline commit 352c1d95e3220d0: "ARC: stop using pt_regs->orig_r8"] Stop using orig_r8 as it could get clobbered by ST in trap_with_param, and further it is semantically not needed either. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29ARC: gdbserver breakage in Big-Endian configuration #1Vineet Gupta
[Based on mainline commit 502a0c775c7f0a: "ARC: pt_regs update #5"] gdbserver needs @stop_pc, served by ptrace, but fetched from pt_regs differently, based on in_brkpt_traps(), which in turn relies on additional machine state in pt_regs->event bitfield. unsigned long orig_r8:16, event:16; For big endian config, this macro was returning false, despite being in breakpoint Trap exception, causing wrong @stop_pc to be returned to gdb. Issue #1: In BE, @event above is at offset 2 in word, while a STW insn at offset 0 was used to update it. Resort to using ST insn which updates the half-word at right location. Issue #2: The union involving bitfields causes all the members to be laid out at offset 0. So with fix #1 above, ASM was now updating at offset 2, "C" code was still referencing at offset 0. Fixed by wrapping bitfield in a struct. Reported-by: Noam Camus <noamc@ezchip.com> Tested-by: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29KVM: s390: move kvm_guest_enter,exit closer to sieDominik Dingel
commit 2b29a9fdcb92bfc6b6f4c412d71505869de61a56 upstream. Any uaccess between guest_enter and guest_exit could trigger a page fault, the page fault handler would handle it as a guest fault and translate a user address as guest address. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20s390: Fix broken buildGuenter Roeck
commit 215b28a5308f3d332df2ee09ef11fda45d7e4a92 upstream. Fix this build error: In file included from fs/exec.c:61:0: arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned' arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default] arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu': arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end' Broken due to commit 2b047252d0 ("Fix TLB gather virtual address range invalidation corner cases"). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> [ Oh well. We had build testing for ppc amd um, but no s390 - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20m68k/atari: ARAnyM - Fix NatFeat module supportGeert Uytterhoeven
commit e8184e10f89736a23ea6eea8e24cd524c5c513d2 upstream. As pointed out by Andreas Schwab, pointers passed to ARAnyM NatFeat calls should be physical addresses, not virtual addresses. Fortunately on Atari, physical and virtual kernel addresses are the same, as long as normal kernel memory is concerned, so this usually worked fine without conversion. But for modules, pointers to literal strings are located in vmalloc()ed memory. Depending on the version of ARAnyM, this causes the nf_get_id() call to just fail, or worse, crash ARAnyM itself with e.g. Gotcha! Illegal memory access. Atari PC = $968c This is a big issue for distro kernels, who want to have all drivers as loadable modules in an initrd. Add a wrapper for nf_get_id() that copies the literal to the stack to work around this issue. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20m68k: Truncate base in do_div()Andreas Schwab
commit ea077b1b96e073eac5c3c5590529e964767fc5f7 upstream. Explicitly truncate the second operand of do_div() to 32 bits to guard against bogus code calling it with a 64-bit divisor. [Thorsten] After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with: btrfs: setting nodatacow, compression disabled btrfs: enabling auto recovery btrfs: disk space caching is enabled *** ZERO DIVIDE *** FORMAT=2 Current process id is 722 BAD KERNEL TRAP: 00000000 Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs] SR: 2000 SP: 30c1fab4 a2: 30f0faf0 d0: 00000000 d1: 00001000 d2: 00000000 d3: 00000000 d4: 00010000 d5: 00000000 a0: 3085c72c a1: 3085c72c Process mount (pid: 722, task=30f0faf0) Frame format=2 instr addr=319535ae Stack from 30c1faec: 00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00 00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000 00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000 30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003 00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000 0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002 Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000 [...] Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68 [Geert] As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block() calls do_div(stripe_nr, stripe_len); with stripe_len u64, while do_div() assumes the divisor is a 32-bit number. Due to the lack of truncation in the m68k-specific implementation of do_div(), the division is performed using the upper 32-bit word of stripe_len, which is zero. This was introduced by commit 53b381b3abeb86f12787a6c40fee9b2f71edc23b ("Btrfs: RAID5 and RAID6"), which changed the divisor from map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20ARM: 7809/1: perf: fix event validation for software group leadersWill Deacon
commit c95eb3184ea1a3a2551df57190c81da695e2144b upstream. It is possible to construct an event group with a software event as a group leader and then subsequently add a hardware event to the group. This results in the event group being validated by adding all members of the group to a fake PMU and attempting to allocate each event on their respective PMU. Unfortunately, for software events wthout a corresponding arm_pmu, this results in a kernel crash attempting to dereference the ->get_event_idx function pointer. This patch fixes the problem by checking explicitly for software events and ignoring those in event validation (since they can always be scheduled). We will probably want to revisit this for 3.12, since the validation checks don't appear to work correctly when dealing with multiple hardware PMUs anyway. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20Fix TLB gather virtual address range invalidation corner casesLinus Torvalds
commit 2b047252d087be7f2ba088b4933cd904f92e6fce upstream. Ben Tebulin reported: "Since v3.7.2 on two independent machines a very specific Git repository fails in 9/10 cases on git-fsck due to an SHA1/memory failures. This only occurs on a very specific repository and can be reproduced stably on two independent laptops. Git mailing list ran out of ideas and for me this looks like some very exotic kernel issue" and bisected the failure to the backport of commit 53a59fc67f97 ("mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT"). That commit itself is not actually buggy, but what it does is to make it much more likely to hit the partial TLB invalidation case, since it introduces a new case in tlb_next_batch() that previously only ever happened when running out of memory. The real bug is that the TLB gather virtual memory range setup is subtly buggered. It was introduced in commit 597e1c3580b7 ("mm/mmu_gather: enable tlb flush range in generic mmu_gather"), and the range handling was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots"), but that fix was not complete. The problem with the TLB gather virtual address range is that it isn't set up by the initial tlb_gather_mmu() initialization (which didn't get the TLB range information), but it is set up ad-hoc later by the functions that actually flush the TLB. And so any such case that forgot to update the TLB range entries would potentially miss TLB invalidates. Rather than try to figure out exactly which particular ad-hoc range setup was missing (I personally suspect it's the hugetlb case in zap_huge_pmd(), which didn't have the same logic as zap_pte_range() did), this patch just gets rid of the problem at the source: make the TLB range information available to tlb_gather_mmu(), and initialize it when initializing all the other tlb gather fields. This makes the patch larger, but conceptually much simpler. And the end result is much more understandable; even if you want to play games with partial ranges when invalidating the TLB contents in chunks, now the range information is always there, and anybody who doesn't want to bother with it won't introduce subtle bugs. Ben verified that this fixes his problem. Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com> Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au> Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20ARM: KVM: clear exclusive monitor on all exception returnsMarc Zyngier
commit 22cfbb6d730ca2fda236b507d9fba17bf002736c upstream. Make sure we clear the exclusive monitor on all exception returns, which otherwise could lead to lock corruptions. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20ARM: KVM: add missing dsb before invalidating Stage-2 TLBsMarc Zyngier
commit 479c5ae2f8a55509b691494cd13691d3dc31d102 upstream. When performing a Stage-2 TLB invalidation, it is necessary to make sure the write to the page tables is observable by all CPUs. For this purpose, add a dsb instruction to __kvm_tlb_flush_vmid_ipa before doing the TLB invalidation itself. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20ARM: KVM: perform save/restore of PARMarc Zyngier
commit 6a077e4ab9cbfbf279fb955bae05b03781c97013 upstream. Not saving PAR is an unfortunate oversight. If the guest performs an AT* operation and gets scheduled out before reading the result of the translation from PAR, it could become corrupted by another guest or the host. Saving this register is made slightly more complicated as KVM also uses it on the permission fault handling path, leading to an ugly "stash and restore" sequence. Fortunately, this is already a slow path so we don't really care. Also, Linux doesn't do any AT* operation, so Linux guests are not impacted by this bug. [ Slightly tweaked to use an even register as first operand to ldrd and strd operations in interrupts_head.S - Christoffer ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20x86 get_unmapped_area(): use proper mmap base for bottom-up directionRadu Caragea
commit df54d6fa54275ce59660453e29d1228c2b45a826 upstream. When the stack is set to unlimited, the bottomup direction is used for mmap-ings but the mmap_base is not used and thus effectively renders ASLR for mmapings along with PIE useless. Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Sendroiu <molecula2788@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20microblaze: fix clone syscallMichal Simek
commit dfa9771a7c4784bafd0673bc7abcee3813088b77 upstream. Fix inadvertent breakage in the clone syscall ABI for Microblaze that was introduced in commit f3268edbe6fe ("microblaze: switch to generic fork/vfork/clone"). The Microblaze syscall ABI for clone takes the parent tid address in the 4th argument; the third argument slot is used for the stack size. The incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd slot. This commit restores the original ABI so that existing userspace libc code will work correctly. All kernel versions from v3.8-rc1 were affected. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20perf/arm: Fix armpmu_map_hw_event()Stephen Boyd
commit b88a2595b6d8aedbd275c07dfa784657b4f757eb upstream. Fix constraint check in armpmu_map_hw_event(). Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20perf/x86: Fix intel QPI uncore event definitionsVince Weaver
commit c9601247f8f3fdc18aed7ed7e490e8dfcd07f122 upstream. John McCalpin reports that the "drs_data" and "ncb_data" QPI uncore events are missing the "extra bit" and always return zero values unless the bit is properly set. More details from him: According to the Xeon E5-2600 Product Family Uncore Performance Monitoring Guide, Table 2-94, about 1/2 of the QPI Link Layer events (including the ones that "perf" calls "drs_data" and "ncb_data") require that the "extra bit" be set. This was confusing for a while -- a note at the bottom of page 94 says that the "extra bit" is bit 16 of the control register. Unfortunately, Table 2-86 clearly says that bit 16 is reserved and must be zero. Looking around a bit, I found that bit 21 appears to be the correct "extra bit", and further investigation shows that "perf" actually agrees with me: [root@c560-003.stampede]# cat /sys/bus/event_source/devices/uncore_qpi_0/format/event config:0-7,21 So the command # perf -e "uncore_qpi_0/event=drs_data/" Is the same as # perf -e "uncore_qpi_0/event=0x02,umask=0x08/" While it should be # perf -e "uncore_qpi_0/event=0x102,umask=0x08/" I confirmed that this last version gives results that agree with the amount of data that I expected the STREAM benchmark to move across the QPI link in the second (cross-chip) test of the original script. Reported-by: John McCalpin <mccalpin@tacc.utexas.edu> Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Cc: zheng.z.yan@intel.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1308021037280.26119@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14MIPS: Expose missing pci_io{map,unmap} declarationsMarkos Chandras
commit 78857614104a26cdada4c53eea104752042bf5a1 upstream. The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move it to the CONFIG_MIPS symbol so it's always selected for MIPS. This fixes the missing pci_iomap declaration for MIPS. Moreover, the pci_iounmap function was not defined in the io.h header file if the CONFIG_PCI symbol is not set, but it should since MIPS is not using CONFIG_GENERIC_IOMAP. This fixes the following problem on a allyesconfig: drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/5478/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14powerpc/tm: Fix context switching TAR, PPR and DSCR SPRsMichael Neuling
commit 28e61cc466d8daace4b0f04ba2b83e0bd68f5832 upstream. If a transaction is rolled back, the Target Address Register (TAR), Processor Priority Register (PPR) and Data Stream Control Register (DSCR) should be restored to the checkpointed values before the transaction began. Any changes to these SPRs inside the transaction should not be visible in the abort handler. Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If we preempt a processes inside a transaction which has modified any of these, on process restore, that same transaction may be aborted we but we won't see the checkpointed versions of these SPRs. This adds checkpointed versions of these SPRs to the thread_struct and adds the save/restore of these three SPRs to the treclaim/trechkpt code. Without this if any of these SPRs are modified during a transaction, users may incorrectly see a speculated SPR value even if the transaction is aborted. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14powerpc: Save the TAR register earlierMichael Neuling
commit c2d52644e2da8a07ecab5ca62dd0bc563089e8dc upstream. This moves us to save the Target Address Register (TAR) a earlier in __switch_to. It introduces a new function save_tar() to do this. We need to save the TAR earlier as we will overwrite it in the transactional memory reclaim/recheckpoint path. We are going to do this in a subsequent patch which will fix saving the TAR register when it's modified inside a transaction. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14powerpc: Fix context switch DSCR on POWER8Michael Neuling
commit 2517617e0de65f8f7cfe75cae745d06b1fa98586 upstream. POWER8 allows the DSCR to be accessed directly from userspace via a new SPR number 0x3 (Rather than 0x11. DSCR SPR number 0x11 is still used on POWER8 but like POWER7, is only accessible in HV and OS modes). Currently, we allow this by setting H/FSCR DSCR bit on boot. Unfortunately this doesn't work, as the kernel needs to see the DSCR change so that it knows to no longer restore the system wide version of DSCR on context switch (ie. to set thread.dscr_inherit). This clears the H/FSCR DSCR bit initially. If a process then accesses the DSCR (via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in facility_unavailable_exception(). We also change _switch() so that we set or clear the H/FSCR DSCR bit based on the thread.dscr_inherit. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14powerpc: Rework setting up H/FSCR bit definitionsMichael Neuling
commit 74e400cee6c0266ba2d940ed78d981f1e24a8167 upstream. This reworks the Facility Status and Control Regsiter (FSCR) config bit definitions so that we can access the bit numbers. This is needed for a subsequent patch to fix the userspace DSCR handling. HFSCR and FSCR bit definitions are the same, so reuse them. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14powerpc: Fix hypervisor facility unavaliable vector numberMichael Neuling
commit 88f094120bd2f012ff494ae50a8d4e0d8af8f69e upstream. Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we mark it as an OS facility unavaliable (0xf60) as the two share the same code path. The becomes a problem in facility_unavailable_exception() as we aren't able to see the hypervisor facility unavailable exceptions. Below fixes this by duplication the required macros. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14powerpc: On POWERNV enable PPC_DENORMALISATION by defaultAnton Blanchard
commit 4e90a2a7375e86827541bda9393414c03e7721c6 upstream. We want PPC_DENORMALISATION enabled when POWERNV is enabled, so update the Kconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipsetNeil Horman
commit 803075dba31c17af110e1d9a915fe7262165b213 upstream. Recently we added an early quirk to detect 5500/5520 chipsets with early revisions that had problems with irq draining with interrupt remapping enabled: commit 03bbcb2e7e292838bb0244f5a7816d194c911d62 Author: Neil Horman <nhorman@tuxdriver.com> Date: Tue Apr 16 16:38:32 2013 -0400 iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets It turns out this same problem is present in the intel X58 chipset as well. See errata 69 here: http://www.intel.com/content/www/us/en/chipsets/x58-express-specification-update.html This patch extends the pci early quirk so that the chip devices/revisions specified in the above update are also covered in the same way: Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Donald Dutile <ddutile@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Malcolm Crossley <malcolm.crossley@citrix.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1374059639-8631-1-git-send-email-nhorman@tuxdriver.com [ Small edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11s390/bitops: fix find_next_bit_leftMartin Schwidefsky
commit 3b0040a47ad63f7147e9e7d2febb61a3b564bb90 upstream. The find_next_bit_left function is broken if used with an offset which is not a multiple of 64. The shift to mask the bits of a 64-bit word not to search is in the wrong direction, the result can be either a bit found smaller than the offset or failure to find a set bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11s390: add support for IBM zBC12 machineHeiko Carstens
commit 594712276e737961d30e11eae80d403b2b3815df upstream. Just add the new model number where appropiate. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.dazH.J. Lu
commit eaa5a990191d204ba0f9d35dbe5505ec2cdd1460 upstream. GCC will optimize mxcsr_feature_mask_init in arch/x86/kernel/i387.c: memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct)); asm volatile("fxsave %0" : : "m" (fx_scratch)); mask = fx_scratch.mxcsr_mask; if (mask == 0) mask = 0x0000ffbf; to memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct)); asm volatile("fxsave %0" : : "m" (fx_scratch)); mask = 0x0000ffbf; since asm statement doesn’t say it will update fx_scratch. As the result, the DAZ bit will be cleared. This patch fixes it. This bug dates back to at least kernel 2.6.12. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11parisc: Fix interrupt routing for C8000 serial portsThomas Bogendoerfer
commit dd5e6d6a3db09b16b7c222943977865eead88cc3 upstream. We can't use dev->mod_index for selecting the interrupt routing entry, because it's not an index into interrupt routing table. It will be even wrong on a machine with 2 CPUs (4 cores). But all needed information is contained in the PAT entries for the serial ports. mod[0] contains the iosapic address and mod_info has some indications for the interrupt input (at least it looks like it). This patch implements the searching for the right iosapic and uses this interrupt input information. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11parisc: Fix cache routines to ignore vma's with an invalid pfnJohn David Anglin
commit 50861f5a02dbf939c27d35a26c472885e2844188 upstream. The parisc architecture does not have a pte special bit. As a result, special mappings are handled with the VM_PFNMAP and VM_MIXEDMAP flags. VM_MIXEDMAP mappings may or may not have a "struct page" backing. When pfn_valid() is false, there is no "struct page" backing. Otherwise, they are treated as normal pages. The FireGL driver uses the VM_MIXEDMAP without a backing "struct page". This treatment caused a panic due to a TLB data miss in update_mmu_cache. This appeared to be in the code generated for page_address(). We were in fact using a very circular bit of code to determine the physical address of the PFN in various cache routines. This wasn't valid when there was no "struct page" backing. The needed address can in fact be determined simply from the PFN itself without using the "struct page". The attached patch updates update_mmu_cache(), flush_cache_mm(), flush_cache_range() and flush_cache_page() to check pfn_valid() and to directly compute the PFN physical and virtual addresses. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11powerpc: VPHN topology change updates all siblingsRobert Jennings
commit 3be7db6ab45b21345386d1a466da133b19cde5e4 upstream. When an associativity level change is found for one thread, the siblings threads need to be updated as well. This is done today for PRRN in stage_topology_update() but is missing for VPHN in update_cpu_associativity_changes_mask(). This patch will correctly update all thread siblings during a topology change. Without this patch a topology update can result in a CPU in init_sched_groups_power() getting stuck indefinitely in a loop. This loop is built in build_sched_groups(). As a result of the thread moving to a node separate from its siblings the struct sched_group will have its next pointer set to point to itself rather than the sched_group struct of the next thread. This happens because we have a domain without the SD_OVERLAP flag, which is correct, and a topology that doesn't conform with reality (threads on the same core assigned to different numa nodes). When this list is traversed by init_sched_groups_power() it will reach the thread's sched_group structure and loop indefinitely; the cpu will be stuck at this point. The bug was exposed when VPHN was enabled in commit b7abef0 (v3.9). Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11ARM: 7791/1: a.out: remove partial a.out supportWill Deacon
commit acfdd4b1f7590d02e9bae3b73bdbbc4a31b05d38 upstream. a.out support on ARM requires that argc, argv and envp are passed in r0-r2 respectively, which requires hacking load_aout_binary to prevent argc being clobbered by the return code. Whilst mainline kernels do set the registers up in start_thread, the aout loader has never carried the hack in mainline. Initialising the registers in this way actually goes against the libc expectations for ELF binaries, where argc, argv and envp are passed on the stack, with r0 being used to hold a pointer to an exit function for cleaning up after the dynamic linker if required. If the pointer is NULL, then it is ignored. When execing an ELF binary, Linux currently zeroes r0, then sets it to argc and then finally clobbers it with the return value of the execve syscall, so we actually end up with: r0 = 0 stack[0] = argc r1 = stack[1] = argv r2 = stack[2] = envp libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve works for user-spawned threads, but when executing an ELF binary from a kernel thread (via call_usermodehelper), the execve is performed on the ret_from_fork path, which restores r0 from the saved pt_regs, resulting in argc being presented to the C library. This has horrible consequences when the application exits, since we have an exit function registered using argc, resulting in a jump to hyperspace. This patch solves the problem by removing the partial a.out support from arch/arm/ altogether. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11ARM: 7790/1: Fix deferred mm switch on VIVT processorsCatalin Marinas
commit bdae73cd374e28db544fdd9b77de689a36e3c129 upstream. As of commit b9d4d42ad9 (ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs), the mm switching on VIVT processors is done in the finish_arch_post_lock_switch() function to avoid whole cache flushing with interrupts disabled. The need for deferred mm switch is stored as a thread flag (TIF_SWITCH_MM). However, with preemption enabled, we can have another thread switch before finish_arch_post_lock_switch(). If the new thread has the same mm as the previous 'next' thread, the scheduler will not call switch_mm() and the TIF_SWITCH_MM flag won't be set for the new thread. This patch moves the switch pending flag to the mm_context_t structure since this is specific to the mm rather than thread. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11ARM: 7784/1: mm: ensure SMP alternates assemble to exactly 4 bytes with Thumb-2Will Deacon
commit bf3f0f332f76a85ff3a0b393aaded5a8533769c0 upstream. Commit ae8a8b9553bd ("ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead") added early function returns for page table cache flushing operations on ARMv7 SMP CPUs. Unfortunately, when targetting Thumb-2, these `mov pc, lr' sequences assemble to 2 bytes which can lead to corruption of the instruction stream after code patching. This patch fixes the alternates to use wide (32-bit) instructions for Thumb-2, therefore ensuring that the patching code works correctly. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>