path: root/drivers/char/ipmi
AgeCommit message (Collapse)Author
2013-05-16ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutexBenjamin LaHaise
When a 32 bit version of ipmitool is used on a 64 bit kernel, the ipmi_devintf code fails to correctly acquire ipmi_mutex. This results in incomplete data being retrieved in some cases, or other possible failures. Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this. Signed-off-by: Benjamin LaHaise <> Signed-off-by: Corey Minyard <> Cc: Signed-off-by: Linus Torvalds <>
2013-05-16ipmi: Improve error messages on failed irq enableCorey Minyard
When the interrupt enable message returns an error, the messages are not entirely accurate nor helpful. So improve them. Signed-off-by: Corey Minyard <> Cc: Andy Lutomirski <> Signed-off-by: Linus Torvalds <>
2013-05-16drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflowChen Gang
When calling memcpy, read_data and write_data need additional 2 bytes. write_data: for checking: "if (size > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)" read_data: for checking: "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)" Signed-off-by: Chen Gang <> Signed-off-by: Corey Minyard <> Cc: Signed-off-by: Linus Torvalds <>
2013-05-16drivers: char: ipmi: Replaced kmalloc and strcpy with kstrdupAlexandru Gheorghiu
Replaced calls to kmalloc followed by strcpy with a sincle call to kstrdup. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <> Signed-off-by: Corey Minyard <> Signed-off-by: Linus Torvalds <>
2013-05-01proc: Supply a function to remove a proc entry by PDEDavid Howells
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells <> Acked-by: Grant Likely <grant.likely@linaro.or> cc: cc: cc: cc: cc: cc: cc: Signed-off-by: Al Viro <>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <>
2013-02-27ipmi: add options to disable openfirmware and PCI scanningCorey Minyard
Add try... parameters to disable pci and platform (openfirmware) device scanning for IPMI. Also add docs for all the try... parameters. Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2013-02-27ipmi: add new kernel options to prevent automatic ipmi initCorey Minyard
The configuration change building ipmi_si into the kernel precludes the use of a custom driver that can utilize more than one KCS interface, multiple IPMBs, and more than one BMC. This capability is important for fault-tolerant systems. Even if the kernel option ipmi_si.trydefaults=0 is specified, ipmi_si discovers and claims one of the KCS interfaces on a Stratus server. The inability to now prevent the kernel from managing this device is a regression from previous kernels. The regression breaks a capability fault-tolerant vendors have relied upon. To support both ACPI opregion access and the need to avoid activation of ipmi_si on some platforms, we've added two new kernel options, ipmi_si.tryacpi and ipmi_si.trydmi be added to prevent ipmi_si from initializing when these options are set to 0 on the kernel command line. With these options at the default value of 1, ipmi_si init proceeds according to the kernel default. Tested-by: Jim Paradis <> Signed-off-by: Robert Evans <> Signed-off-by: Jim Paradis <> Signed-off-by: Tony Camuso <> Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2013-01-03Drivers: char: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <> Cc: David Airlie <> Cc: Matt Mackall <> Cc: Herbert Xu <> Signed-off-by: Greg Kroah-Hartman <>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git:// Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git:// (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-11-21char: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <> Cc: David Airlie <> Cc: Olof Johansson <> Cc: Mattia Dongili <> Cc: Kent Yoder <> Cc: Rajiv Andrade <> Cc: Marcel Selhorst <> Cc: Sirrix AG <> Cc: Cc: Cc: Cc: Cc: Signed-off-by: Greg Kroah-Hartman <>
2012-11-21char: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <> Cc: David Airlie <> Cc: Kent Yoder <> Cc: Rajiv Andrade <> Cc: Marcel Selhorst <> Cc: Sirrix AG <> Cc: Cc: Signed-off-by: Greg Kroah-Hartman <>
2012-11-21char: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <> Cc: Geoff Levand <> Cc: Mattia Dongili <> Cc: Amit Shah <> Cc: Cc: Cc: Cc: Cc: Signed-off-by: Greg Kroah-Hartman <>
2012-11-19various: Fix spelling of "asynchronous" in comments.Adam Buchbinder
"Asynchronous" is misspelled in some comments. No code changes. Signed-off-by: Adam Buchbinder <> Signed-off-by: Jiri Kosina <>
2012-10-16IPMI: Detect register spacing on PCI interfacesCorey Minyard
The IPMI spec defines a way to detect register spacing for PCI interfaces, so implement it. Signed-off-by: Steven Hsieh <> Signed-off-by: Corey Minyard <> Signed-off-by: Linus Torvalds <>
2012-10-16IPMI: Fix some uninitialized warningCorey Minyard
There was a spot where the compiler couldn't tell some variables would be set. So initialize them to make the warning go away. Signed-off-by: Corey Minyard <> Signed-off-by: Linus Torvalds <>
2012-07-23char/ipmi: remove local ioctl defines replaced by generic onesOskar Schirmer
This watchdog driver had ioctl defines introduced locally for pre timeout handling, marked to be removed as soon as a generic replacement would become available. The latter has actually occurred in 2006, at e05b59fe. Remove the local duplicates for pre timeout handling. Signed-off-by: Oskar Schirmer <> Acked-by: Corey Minyard <> Signed-off-by: Wim Van Sebroeck <> Signed-off-by: Andrew Morton <>
2012-07-10PM / IPMI: Remove empty legacy PCI PM callbacksRafael J. Wysocki
The legacy PM callbacks provided by the IPMI PCI driver are empty routines returning 0, so they can be safely dropped. Signed-off-by: Rafael J. Wysocki <> Acked-by: Corey Minyard <>
2012-03-28Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge third batch of patches from Andrew Morton: - Some MM stragglers - core SMP library cleanups (on_each_cpu_mask) - Some IPI optimisations - kexec - kdump - IPMI - the radix-tree iterator work - various other misc bits. "That'll do for -rc1. I still have ~10 patches for 3.4, will send those along when they've baked a little more." * emailed from Andrew Morton <>: (35 commits) backlight: fix typo in tosa_lcd.c crc32: add help text for the algorithm select option mm: move hugepage test examples to tools/testing/selftests/vm mm: move slabinfo.c to tools/vm mm: move page-types.c from Documentation to tools/vm selftests/Makefile: make `run_tests' depend on `all' selftests: launch individual selftests from the main Makefile radix-tree: use iterators in find_get_pages* functions radix-tree: rewrite gang lookup using iterator radix-tree: introduce bit-optimized iterator fs/proc/namespaces.c: prevent crash when ns_entries[] is empty nbd: rename the nbd_device variable from lo to nbd pidns: add reboot_pid_ns() to handle the reboot syscall sysctl: use bitmap library functions ipmi: use locks on watchdog timeout set on reboot ipmi: simplify locking ipmi: fix message handling during panics ipmi: use a tasklet for handling received messages ipmi: increase KCS timeouts ipmi: decrease the IPMI message transaction time in interrupt mode ...
2012-03-28ipmi: use locks on watchdog timeout set on rebootCorey Minyard
The IPMI watchdog timer clears or extends the timer on reboot/shutdown. It was using the non-locking routine for setting the watchdog timer, but this was causing race conditions. Instead, use the locking version to avoid the races. It seems to work fine. Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2012-03-28ipmi: simplify lockingCorey Minyard
Now that the the IPMI driver is using a tasklet, we can simplify the locking in the driver and get rid of the message lock. Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2012-03-28ipmi: fix message handling during panicsCorey Minyard
The part of the IPMI driver that delivered panic information to the event log and extended the watchdog timeout during a panic was not properly handling the messages. It used static messages to avoid allocation, but wasn't properly waiting for these, or wasn't properly handling the refcounts. Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2012-03-28ipmi: use a tasklet for handling received messagesCorey Minyard
The IPMI driver would release a lock, deliver a message, then relock. This is obviously ugly, and this patch converts the message handler interface to use a tasklet to schedule work. This lets the receive handler be called from an interrupt handler with interrupts enabled. Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2012-03-28ipmi: increase KCS timeoutsMatthew Garrett
We currently time out and retry KCS transactions after 1 second of waiting for IBF or OBF. This appears to be too short for some hardware. The IPMI spec says "All system software wait loops should include error timeouts. For simplicity, such timeouts are not shown explicitly in the flow diagrams. A five-second timeout or greater is recommended". Change the timeout to five seconds to satisfy the slow hardware. Signed-off-by: Matthew Garrett <> Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2012-03-28ipmi: decrease the IPMI message transaction time in interrupt modeSrinivas_Gowda
Call the event handler immediately after starting the next message. This change considerably decreases the IPMI transaction time (cuts off ~9ms for a single ipmitool transaction). Signed-off-by: Srinivas_Gowda <> Signed-off-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git:// Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git:// (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <>
2012-03-27watchdog: nowayout is boolWim Van Sebroeck
nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck <>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <> Signed-off-by: Rusty Russell <>
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git:// * 'for-linus' of git:// (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2011-12-20ipmi_watchdog: restore settings when BMC resetCorey Minyard
If the BMC gets reset, it will return 0x80 response errors. In less than a week # grep "Error 80 on cmd 22" /var/log/kernel |wc -l 378681 In this case, it is probably a good idea to restore the IPMI settings. Signed-off-by: Corey Minyard <> Tested-by: Arkadiusz Miśkiewicz <> Reported-by: Arkadiusz Miśkiewicz <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2011-12-02treewide: Fix typos in various parts of the kernel, and fix some comments.Justin P. Mattock
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments. Please let me know if I missed anything, and I will try to get it changed and resent. Signed-off-by: Justin P. Mattock <> Acked-by: Randy Dunlap <> Signed-off-by: Jiri Kosina <>
2011-10-10x86, nmi: Wire up NMI handlers to new routinesDon Zickus
Just convert all the files that have an nmi handler to the new routines. Most of it is straight forward conversion. A couple of places needed some tweaking like kgdb which separates the debug notifier from the nmi handler and mce removes a call to notify_die. [Thanks to Ying for finding out the history behind that mce call And Boris responding that he would like to remove that call because of it] The things that get converted are the registeration/unregistration routines and the nmi handler itself has its args changed along with code removal to check which list it is on (most are on one NMI list except for kgdb which has both an NMI routine and an NMI Unknown routine). Signed-off-by: Don Zickus <> Signed-off-by: Peter Zijlstra <> Acked-by: Corey Minyard <> Cc: Jason Wessel <> Cc: Andi Kleen <> Cc: Robert Richter <> Cc: Huang Ying <> Cc: Corey Minyard <> Cc: Jack Steiner <> Link: Signed-off-by: Ingo Molnar <>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <> Reviewed-by: Eric Dumazet <> Cc: Ingo Molnar <> Cc: David Miller <> Cc: Eric Dumazet <> Acked-by: Mike Frysinger <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2011-05-26ipmi: convert to seq_file interfaceAlexey Dobriyan
The ->read_proc interface is going away, convert to seq_file. Signed-off-by: Alexey Dobriyan <> Cc:Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2011-05-18drivercore: revert addition of of_match to struct deviceGrant Likely
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <>
2011-03-23drivers/char/ipmi/ipmi_si_intf.c: fix cleanup_one_si section mismatchSergey Senozhatsky
commit d2478521afc2022 ("char/ipmi: fix OOPS caused by pnp_unregister_driver on unregistered driver") introduced a section mismatch by calling __exit cleanup_ipmi_si from __devinit init_ipmi_si. Remove __exit annotation from cleanup_ipmi_si. Signed-off-by: Sergey Senozhatsky <> Acked-by: Corey Minyard <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2011-03-16Merge branch 'devicetree/next' of git:// Torvalds
* 'devicetree/next' of git:// (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-10ipmi: Fix IPMI errors due to timing problemsDoe, YiCheng
This patch fixes an issue in OpenIPMI module where sometimes an ABORT command is sent after sending an IPMI request to BMC causing the IPMI request to fail. Signed-off-by: YiCheng Doe <> Signed-off-by: Corey Minyard <> Acked-by: Tom Mingarelli <> Tested-by: Andy Cress <> Tested-by: Mika Lansirine <> Tested-by: Brian De Wolf <> Cc: Jean Michel Audet <> Cc: Jozef Sudelsky <> Acked-by: Matthew Garrett <> Signed-off-by: Linus Torvalds <>
2011-02-28ipmi: convert OF driver to platform driverRob Herring
of_bus is deprecated in favor of the plain platform bus. This patch merges the ipmi OF driver with the existing platform driver. CONFIG_PPC_OF occurrances are removed or replaced with CONFIG_OF. Compile tested with and without CONFIG_OF. Tested OF probe and default probe cases. Signed-off-by: Rob Herring <> Signed-off-by: Grant Likely <>
2011-02-10char/ipmi: fix OOPS caused by pnp_unregister_driver on unregistered driverCorey Minyard
This patch fixes an OOPS triggered when calling modprobe ipmi_si a second time after the first modprobe returned without finding any ipmi devices. This can happen if you reload the module after having the first module load fail. The driver was not deregistering from PNP in that case. Peter Huewe originally reported this patch and supplied a fix, I have a different patch based on Linus' suggestion that cleans things up a bit more. Cc: Cc: Reviewed-by: Peter Huewe <> Cc: Randy Dunlap <> Signed-off-by: Corey Minyard <> Signed-off-by: Linus Torvalds <>
2011-01-13Merge branch 'release' of ↵Linus Torvalds
git:// * 'release' of git:// (59 commits) ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework ACPI: fix resource check message ACPI / Battery: Update information on info notification and resume ACPI: Drop device flag wake_capable ACPI: Always check if _PRW is present before trying to evaluate it ACPI / PM: Check status of power resources under mutexes ACPI / PM: Rename acpi_power_off_device() ACPI / PM: Drop acpi_power_nocheck ACPI / PM: Drop acpi_bus_get_power() Platform / x86: Make fujitsu_laptop use acpi_bus_update_power() ACPI / Fan: Rework the handling of power resources ACPI / PM: Register power resource devices as soon as they are needed ACPI / PM: Register acpi_power_driver early ACPI / PM: Add function for updating device power state consistently ACPI / PM: Add function for device power state initialization ACPI / PM: Introduce __acpi_bus_get_power() ACPI / PM: Introduce function for refcounting device power resources ACPI / PM: Add functions for manipulating lists of power resources ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes ACPICA: Update version to 20101209 ...
2011-01-12Merge branch 'ipmi' into releaseLen Brown
2011-01-12ACPICA: New GPE handler callback definitionLin Ming
The new GPE handler callback has 2 additional parameters, gpe_device and gpe_number. typedef u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); Signed-off-by: Lin Ming <> Signed-off-by: Len Brown <>
2011-01-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git:// * 'perf-fixes-for-linus' of git:// (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
2011-01-07x86: Convert some devices to use DIE_NMIUNKNOWNDon Zickus
They are a handful of places in the code that register a die_notifier as a catch all in case no claims the NMI. Unfortunately, they trigger on events like DIE_NMI and DIE_NMI_IPI, which depending on when they registered may collide with other handlers that have the ability to determine if the NMI is theirs or not. The function unknown_nmi_error() makes one last effort to walk the die_chain when no one else has claimed the NMI before spitting out messages that the NMI is unknown. This is a better spot for these devices to execute any code without colliding with the other handlers. The two drivers modified are only compiled on x86 arches I believe, so they shouldn't be affected by other arches that may not have DIE_NMIUNKNOWN defined. Signed-off-by: Don Zickus <> Cc: Russ Anderson <> Cc: Corey Minyard <> Cc: Cc: dann frazier <> Signed-off-by: Peter Zijlstra <> LKML-Reference: <> Signed-off-by: Ingo Molnar <>
2011-01-04ipmi: explicitly include of_address.h and of_irq.hRob Herring
of_address.h and of_irq.h are implicitly included on powerpc. Adding them fixes builds on non-powerpc platforms. Signed-off-by: Rob Herring <> Signed-off-by: Grant Likely <>
2011-01-03of: Fixes for OF probing on little endian systemsRob Herring
Fixes for sdhci-of and ipmi drivers. Auditing all drivers using of_get_property did not find other occurrences likely to be used on LE platforms. Signed-off-by: Rob Herring <> Signed-off-by: Grant Likely <>
2010-12-14IPMI: Add one interface to get more info of low-level IPMI deviceZhao Yakui
The IPMI smi_watcher will be used to catch the IPMI interface as they come or go. In order to communicate with the correct IPMI device, it should be confirmed whether it is what we wanted especially on the system with multiple IPMI devices. But the new_smi callback function of smi_watcher provides very limited info(only the interface number and dev pointer) and there is no detailed info about the low level interface. For example: which mechansim registers the IPMI interface(ACPI, PCI, DMI and so on). This is to add one interface that can get more info of low-level IPMI device. For example: the ACPI device handle will be returned for the pnp_acpi IPMI device. Signed-off-by: Zhao Yakui <> Signed-off-by: Corey Minyard <> Signed-off-by: Len Brown <>