summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Decotigny <decot@google.com>2011-04-27 18:32:43 +0000
committerDavid S. Miller <davem@davemloft.net>2011-04-29 14:03:03 -0700
commit14ad2513ed5b709e566a853f4b515d91c5d83311 (patch)
tree19ce2e6deefaa0725533612df85c51b99d2513cb
parentfbef7139a8b89a7f49ba1410593ed894b4c8b017 (diff)
net/igb/e1000/e1000e: more robust ethtool duplex/speed configuration
This makes sure that one cannot request a 99Mbps full-duplex and get a 100Mbps half-duplex configuration in return due to the way the speed/duplex parameters are handled internally. Tested: e1000 works Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/e1000/e1000.h2
-rw-r--r--drivers/net/e1000/e1000_ethtool.c2
-rw-r--r--drivers/net/e1000/e1000_main.c42
-rw-r--r--drivers/net/e1000e/ethtool.c24
-rw-r--r--drivers/net/igb/igb.h2
-rw-r--r--drivers/net/igb/igb_ethtool.c2
-rw-r--r--drivers/net/igb/igb_main.c23
7 files changed, 59 insertions, 38 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index a881dd0093bd..b1b23ddd4eed 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -349,7 +349,7 @@ extern int e1000_up(struct e1000_adapter *adapter);
extern void e1000_down(struct e1000_adapter *adapter);
extern void e1000_reinit_locked(struct e1000_adapter *adapter);
extern void e1000_reset(struct e1000_adapter *adapter);
-extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 127fef4fce49..4fa727ce8374 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -199,7 +199,7 @@ static int e1000_set_settings(struct net_device *netdev,
ecmd->advertising = hw->autoneg_advertised;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
- if (e1000_set_spd_dplx(adapter, speed + ecmd->duplex)) {
+ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->flags);
return -EINVAL;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 477e066a1cf0..c18cb8e883dd 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -96,7 +96,6 @@ int e1000_up(struct e1000_adapter *adapter);
void e1000_down(struct e1000_adapter *adapter);
void e1000_reinit_locked(struct e1000_adapter *adapter);
void e1000_reset(struct e1000_adapter *adapter);
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
@@ -4385,7 +4384,6 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
struct mii_ioctl_data *data = if_mii(ifr);
int retval;
u16 mii_reg;
- u16 spddplx;
unsigned long flags;
if (hw->media_type != e1000_media_type_copper)
@@ -4424,17 +4422,18 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
hw->autoneg = 1;
hw->autoneg_advertised = 0x2F;
} else {
+ u32 speed;
if (mii_reg & 0x40)
- spddplx = SPEED_1000;
+ speed = SPEED_1000;
else if (mii_reg & 0x2000)
- spddplx = SPEED_100;
+ speed = SPEED_100;
else
- spddplx = SPEED_10;
- spddplx += (mii_reg & 0x100)
- ? DUPLEX_FULL :
- DUPLEX_HALF;
- retval = e1000_set_spd_dplx(adapter,
- spddplx);
+ speed = SPEED_10;
+ retval = e1000_set_spd_dplx(
+ adapter, speed,
+ ((mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF));
if (retval)
return retval;
}
@@ -4596,20 +4595,24 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter)
}
}
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
{
struct e1000_hw *hw = &adapter->hw;
hw->autoneg = 0;
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((hw->media_type == e1000_media_type_fiber) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- e_err(probe, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
- }
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL)
+ goto err_inval;
- switch (spddplx) {
+ switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
hw->forced_speed_duplex = e1000_10_half;
break;
@@ -4628,10 +4631,13 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- e_err(probe, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ goto err_inval;
}
return 0;
+
+err_inval:
+ e_err(probe, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
}
static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 12f1ee250522..859d0d3af6c9 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -200,20 +200,25 @@ static int e1000_get_settings(struct net_device *netdev,
return 0;
}
-static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
{
struct e1000_mac_info *mac = &adapter->hw.mac;
mac->autoneg = 0;
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- e_err("Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL) {
+ goto err_inval;
}
- switch (spddplx) {
+ switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
mac->forced_speed_duplex = ADVERTISE_10_HALF;
break;
@@ -232,10 +237,13 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- e_err("Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ goto err_inval;
}
return 0;
+
+err_inval:
+ e_err("Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
}
static int e1000_set_settings(struct net_device *netdev,
@@ -272,7 +280,7 @@ static int e1000_set_settings(struct net_device *netdev,
hw->fc.requested_mode = e1000_fc_default;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
- if (e1000_set_spd_dplx(adapter, speed + ecmd->duplex)) {
+ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state);
return -EINVAL;
}
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 1c687e298d5e..f4fa4b1751cf 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -360,7 +360,7 @@ extern int igb_up(struct igb_adapter *);
extern void igb_down(struct igb_adapter *);
extern void igb_reinit_locked(struct igb_adapter *);
extern void igb_reset(struct igb_adapter *);
-extern int igb_set_spd_dplx(struct igb_adapter *, u16);
+extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
extern int igb_setup_tx_resources(struct igb_ring *);
extern int igb_setup_rx_resources(struct igb_ring *);
extern void igb_free_tx_resources(struct igb_ring *);
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 023aa9b10654..6e29634b1fb5 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -224,7 +224,7 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
hw->fc.requested_mode = e1000_fc_default;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
- if (igb_set_spd_dplx(adapter, speed + ecmd->duplex)) {
+ if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index cdfd57271051..ce7838e55827 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -6349,21 +6349,25 @@ static void igb_restore_vlan(struct igb_adapter *adapter)
}
}
-int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
{
struct pci_dev *pdev = adapter->pdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
mac->autoneg = 0;
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
/* Fiber NIC's only allow 1000 Gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
- }
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL)
+ goto err_inval;
- switch (spddplx) {
+ switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
mac->forced_speed_duplex = ADVERTISE_10_HALF;
break;
@@ -6382,10 +6386,13 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ goto err_inval;
}
return 0;
+
+err_inval:
+ dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
}
static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)