Merge tag 'v6.16-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

RK3036 usbphy addition and two Sonoff iHost adjustments.

* tag 'v6.16-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rk3036 usb2phy nodes and enable them on kylin
  ARM: dts: rockchip: Sonoff-iHost: correct IO domain voltages
  ARM: dts: rockchip: Sonoff-iHost: adjust SDIO for stability

Link: https://lore.kernel.org/r/3652020.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 53 insertions, 8 deletions

diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index cde552375a43..ae2f84a4e922 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -388,6 +388,18 @@
 	status = "okay";
 };
 
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
+
 &vop {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index f4292b586bc2..fca21ebb224b 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -213,6 +213,8 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
+		phys = <&usb2phy_otg>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -224,6 +226,8 @@
 		clocks = <&cru HCLK_OTG1>;
 		clock-names = "otg";
 		dr_mode = "host";
+		phys = <&usb2phy_host>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -342,6 +346,37 @@
 	grf: syscon@20008000 {
 		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usb2phy: usb2phy@17c {
+			compatible = "rockchip,rk3036-usb2phy";
+			reg = <0x017c 0x20>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
+			#clock-cells = <0>;
+			status = "disabled";
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
 
 		power: power-controller {
 			compatible = "rockchip,rk3036-power-controller";
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
index 9a87dc0d5f66..1aedcd3a2167 100644
--- a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -323,15 +323,15 @@
 };
 
 &pmu_io_domains {
-	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio0-supply = <&vcc3v3_sys>;
 	pmuio1-supply = <&vcc3v3_sys>;
 	vccio1-supply = <&vcc_1v8>;
 	vccio2-supply = <&vccio_sd>;
 	vccio3-supply = <&vcc3v3_sd>;
-	vccio4-supply = <&vcc_dovdd>;
-	vccio5-supply = <&vcc_1v8>;
-	vccio6-supply = <&vcc_1v8>;
-	vccio7-supply = <&vcc_dovdd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_1v8>;
 	status = "okay";
 };
 
@@ -342,16 +342,14 @@
 
 &sdio {
 	bus-width = <4>;
-	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <50000000>;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
 	rockchip,default-sample-phase = <90>;
-	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";