Merge tag 'soc-arm-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC arm platform code updates from Arnd Bergmann:
 "The updates here add code for the Microchip SAMA7D65 SoC, as well as
  minor bugfixes for OMAP"

* tag 'soc-arm-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: omap1: Fix up the Retu IRQ on Nokia 770
  ARM: omap2plus_defconfig: enable charger of TWL603X
  ARM: at91: add new SoC sama7d65
  ARM: at91: pm: change BU Power Switch to automatic mode
  soc: atmel: fix device_node release in atmel_soc_device_init()
  ARM: OMAP2+: Fix a typo

6 files changed, 35 insertions, 14 deletions

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 3a166c2f02bd..6de45d7f6078 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -428,6 +428,7 @@ CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_BQ27XXX=m
 CONFIG_CHARGER_ISP1704=m
 CONFIG_CHARGER_TWL4030=m
+CONFIG_CHARGER_TWL6030=m
 CONFIG_CHARGER_BQ2415X=m
 CONFIG_CHARGER_BQ24190=m
 CONFIG_CHARGER_BQ24735=m
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 344f5305f69a..04bd91c72521 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -58,6 +58,17 @@ config SOC_SAMA5D4
 	help
 	  Select this if you are using one of Microchip's SAMA5D4 family SoC.
 
+config SOC_SAMA7D65
+	bool "SAMA7D65 family"
+	depends on ARCH_MULTI_V7
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_UTMI
+	select SOC_SAMA7
+	help
+	  Select this if you are using one of Microchip's SAMA7D65 family SoC.
+
 config SOC_SAMA7G5
 	bool "SAMA7G5 family"
 	depends on ARCH_MULTI_V7
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index b9b995f8a36e..05a1547642b6 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -598,7 +598,21 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }
 
-static void at91_pm_switch_ba_to_vbat(void)
+/**
+ * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch
+ * to automatic/hardware mode.
+ *
+ * The Backup Unit Power Switch can be managed either by software or hardware.
+ * Enabling hardware mode allows the automatic transition of power between
+ * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the
+ * availability of these power sources.
+ *
+ * If the Backup Unit Power Switch is already in automatic mode, no action is
+ * required. If it is in software-controlled mode, it is switched to automatic
+ * mode to enhance safety and eliminate the need for toggling between power
+ * sources.
+ */
+static void at91_pm_switch_ba_to_auto(void)
 {
 	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
 	unsigned int val;
@@ -609,24 +623,19 @@ static void at91_pm_switch_ba_to_vbat(void)
 
 	val = readl(soc_pm.data.sfrbu + offset);
 
-	/* Already on VBAT. */
-	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+	/* Already on auto/hardware. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl))
 		return;
 
-	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
-	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	val &= ~soc_pm.sfrbu_regs.pswbu.ctrl;
+	val |= soc_pm.sfrbu_regs.pswbu.key;
 	writel(val, soc_pm.data.sfrbu + offset);
-
-	/* Wait for update. */
-	val = readl(soc_pm.data.sfrbu + offset);
-	while (val & soc_pm.sfrbu_regs.pswbu.state)
-		val = readl(soc_pm.data.sfrbu + offset);
 }
 
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		at91_pm_switch_ba_to_vbat();
+		at91_pm_switch_ba_to_auto();
 
 		cpu_suspend(0, at91_suspend_finish);
 
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 3312ef93355d..a5bf5554800f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -289,7 +289,7 @@ static struct gpiod_lookup_table nokia770_irq_gpio_table = {
 		GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for retu IRQ */
-		GPIO_LOOKUP("gpio-48-63", 15, "retu_irq",
+		GPIO_LOOKUP("gpio-48-63", 14, "retu_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for tahvo IRQ */
 		GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq",
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2441d96b7144..a4785302b7ae 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -523,7 +523,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
  * Set the powerdomain @pwrdm's next power state to @pwrst.  The powerdomain
  * may not enter this state immediately if the preconditions for this state
  * have not been satisfied.  Returns -EINVAL if the powerdomain pointer is
- * null or if the power state is invalid for the powerdomin, or returns 0
+ * null or if the power state is invalid for the powerdomain, or returns 0
  * upon success.
  */
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
index 2a42b28931c9..298b542dd1c0 100644
--- a/drivers/soc/atmel/soc.c
+++ b/drivers/soc/atmel/soc.c
@@ -399,7 +399,7 @@ static const struct of_device_id at91_soc_allowed_list[] __initconst = {
 
 static int __init atmel_soc_device_init(void)
 {
-	struct device_node *np = of_find_node_by_path("/");
+	struct device_node *np __free(device_node) = of_find_node_by_path("/");
 
 	if (!of_match_node(at91_soc_allowed_list, np))
 		return 0;