spi: npcm-fiu: add Arbel NPCM8XX support

Merge series from Tomer Maimon <tmaimon77@gmail.com>:

This patch set adds Arbel NPCM8XX Flash Interface Unit (FIU) support to FIU NPCM
driver and modify direct read dummy configuration.

NPCM8XX FIU supports four controllers.

The NPCM FIU driver tested on NPCM845 evaluation board.

2 files changed, 38 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
index a388005842ad..c63ce4cc0a80 100644
--- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
@@ -6,8 +6,13 @@ The NPCM7XX supports three FIU modules,
 FIU0 and FIUx supports two chip selects,
 FIU3 support four chip select.
 
+The NPCM8XX supports four FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU1 and FIU3 supports four chip selects.
+
 Required properties:
-  - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC
+  - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
+			     "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
   - #address-cells : should be 1.
   - #size-cells : should be 0.
   - reg : the first contains the register location and length,
@@ -30,6 +35,12 @@ Aliases:
   		fiu1 represent fiu 3 controller
   		fiu2 represent fiu x controller
 
+  In the NPCM8XX BMC:
+  		fiu0 represent fiu 0 controller
+  		fiu1 represent fiu 1 controller
+  		fiu2 represent fiu 3 controller
+  		fiu3 represent fiu x controller
+
 Example:
 fiu3: spi@c00000000 {
 	compatible = "nuvoton,npcm750-fiu";
diff --git a/drivers/spi/spi-npcm-fiu.c b/drivers/spi/spi-npcm-fiu.c
index ba67dbed9fb8..49f6424e35af 100644
--- a/drivers/spi/spi-npcm-fiu.c
+++ b/drivers/spi/spi-npcm-fiu.c
@@ -36,6 +36,7 @@
 #define NPCM_FIU_UMA_DR1		0x34
 #define NPCM_FIU_UMA_DR2		0x38
 #define NPCM_FIU_UMA_DR3		0x3C
+#define NPCM_FIU_CFG			0x78
 #define NPCM_FIU_MAX_REG_LIMIT		0x80
 
 /* FIU Direct Read Configuration Register */
@@ -151,6 +152,9 @@
 #define NPCM_FIU_UMA_DR3_RB13		GENMASK(15, 8)
 #define NPCM_FIU_UMA_DR3_RB12		GENMASK(7, 0)
 
+/* FIU Configuration Register */
+#define NPCM_FIU_CFG_FIU_FIX		BIT(31)
+
 /* FIU Read Mode */
 enum {
 	DRD_SINGLE_WIRE_MODE	= 0,
@@ -187,6 +191,7 @@ enum {
 	FIU0 = 0,
 	FIU3,
 	FIUX,
+	FIU1,
 };
 
 struct npcm_fiu_info {
@@ -214,6 +219,21 @@ static const struct fiu_data npcm7xx_fiu_data = {
 	.fiu_max = 3,
 };
 
+static const struct npcm_fiu_info npxm8xx_fiu_info[] = {
+	{.name = "FIU0", .fiu_id = FIU0,
+		.max_map_size = MAP_SIZE_128MB, .max_cs = 2},
+	{.name = "FIU3", .fiu_id = FIU3,
+		.max_map_size = MAP_SIZE_128MB, .max_cs = 4},
+	{.name = "FIUX", .fiu_id = FIUX,
+		.max_map_size = MAP_SIZE_16MB, .max_cs = 2},
+	{.name = "FIU1", .fiu_id = FIU1,
+		.max_map_size = MAP_SIZE_16MB, .max_cs = 4} };
+
+static const struct fiu_data npxm8xx_fiu_data = {
+	.npcm_fiu_data_info = npxm8xx_fiu_info,
+	.fiu_max = 4,
+};
+
 struct npcm_fiu_spi;
 
 struct npcm_fiu_chip {
@@ -252,8 +272,7 @@ static void npcm_fiu_set_drd(struct npcm_fiu_spi *fiu,
 	fiu->drd_op.addr.buswidth = op->addr.buswidth;
 	regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG,
 			   NPCM_FIU_DRD_CFG_DBW,
-			   ((op->dummy.nbytes * ilog2(op->addr.buswidth)) / BITS_PER_BYTE)
-			   << NPCM_FIU_DRD_DBW_SHIFT);
+			   op->dummy.nbytes << NPCM_FIU_DRD_DBW_SHIFT);
 	fiu->drd_op.dummy.nbytes = op->dummy.nbytes;
 	regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG,
 			   NPCM_FIU_DRD_CFG_RDCMD, op->cmd.opcode);
@@ -625,6 +644,10 @@ static int npcm_fiu_dirmap_create(struct spi_mem_dirmap_desc *desc)
 		regmap_update_bits(gcr_regmap, NPCM7XX_INTCR3_OFFSET,
 				   NPCM7XX_INTCR3_FIU_FIX,
 				   NPCM7XX_INTCR3_FIU_FIX);
+	} else {
+		regmap_update_bits(fiu->regmap, NPCM_FIU_CFG,
+				   NPCM_FIU_CFG_FIU_FIX,
+				   NPCM_FIU_CFG_FIU_FIX);
 	}
 
 	if (desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN) {
@@ -665,6 +688,7 @@ static const struct spi_controller_mem_ops npcm_fiu_mem_ops = {
 
 static const struct of_device_id npcm_fiu_dt_ids[] = {
 	{ .compatible = "nuvoton,npcm750-fiu", .data = &npcm7xx_fiu_data  },
+	{ .compatible = "nuvoton,npcm845-fiu", .data = &npxm8xx_fiu_data  },
 	{ /* sentinel */ }
 };