Merge branch 'pci/controller/imx6'

- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
  i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank Li)

- Add DT binding for optional i.MX95 Refclk and driver support to enable it
  if the platform hasn't enabled it (Richard Zhu)

- Configure PHY based on controller being in Root Complex or Endpoint mode
  (Frank Li)

- Rely on dbi2 and iATU base addresses from DT via dw_pcie_get_resources()
  instead of hardcoding them in imx6 (Richard Zhu)

- Skip controller_id computation for i.MX7D since it only has one
  controller (Richard Zhu)

- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
  asserted in imx_pcie_assert_core_reset() (Richard Zhu)

- Add missing reference clock enable or disable logic for IMX6SX, IMX7D,
  IMX8MM (Richard Zhu)

- Remove redundant imx7d_pcie_init_phy() since imx7d_pcie_enable_ref_clk()
  does the same thing (Richard Zhu)

* pci/controller/imx6:
  PCI: imx6: Clean up comments and whitespace
  PCI: imx6: Remove surplus imx7d_pcie_init_phy() function
  PCI: imx6: Add missing reference clock disable logic
  PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()
  PCI: imx6: Skip controller_id generation logic for i.MX7D
  PCI: imx6: Fetch dbi2 and iATU base addesses from DT
  PCI: imx6: Configure PHY based on Root Complex or Endpoint mode
  PCI: imx6: Add Refclk for i.MX95 PCIe
  dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RC
  PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
  dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep

# Conflicts:
#	drivers/pci/controller/dwc/pci-imx6.c

4 files changed, 130 insertions, 76 deletions

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index a8b34f58f8f4..cddbe21f99f2 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -17,11 +17,11 @@ description:
 properties:
   clocks:
     minItems: 3
-    maxItems: 4
+    maxItems: 5
 
   clock-names:
     minItems: 3
-    maxItems: 4
+    maxItems: 5
 
   num-lanes:
     const: 1
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
index 84ca12e8b25b..0b3526de1d62 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -22,6 +22,7 @@ properties:
       - fsl,imx8mm-pcie-ep
       - fsl,imx8mq-pcie-ep
       - fsl,imx8mp-pcie-ep
+      - fsl,imx8q-pcie-ep
       - fsl,imx95-pcie-ep
 
   clocks:
@@ -78,6 +79,20 @@ allOf:
       properties:
         compatible:
           enum:
+            - fsl,imx8q-pcie-ep
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: addr_space
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - fsl,imx95-pcie-ep
     then:
       properties:
@@ -103,13 +118,21 @@ allOf:
       properties:
         clocks:
           minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: pcie
             - const: pcie_bus
             - const: pcie_phy
             - const: pcie_aux
-    else:
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mm-pcie-ep
+            - fsl,imx8mp-pcie-ep
+    then:
       properties:
         clocks:
           maxItems: 3
@@ -119,6 +142,20 @@ allOf:
             - const: pcie_bus
             - const: pcie_aux
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imxq-pcie-ep
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: dbi
+            - const: mstr
+            - const: slv
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 1e05c560d797..4c76cd3f98a9 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -40,10 +40,11 @@ properties:
       - description: PCIe PHY clock.
       - description: Additional required clock entry for imx6sx-pcie,
            imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+      - description: PCIe reference clock.
 
   clock-names:
     minItems: 3
-    maxItems: 4
+    maxItems: 5
 
   interrupts:
     items:
@@ -127,7 +128,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: pcie
@@ -140,11 +141,10 @@ allOf:
         compatible:
           enum:
             - fsl,imx8mq-pcie
-            - fsl,imx95-pcie
     then:
       properties:
         clocks:
-          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: pcie
@@ -200,6 +200,23 @@ allOf:
             - const: mstr
             - const: slv
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+            - const: ref
+
 unevaluatedProperties: false
 
 examples:
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 9734399aefde..90ace941090f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -87,6 +87,7 @@ enum imx_pcie_variants {
 	IMX8MQ_EP,
 	IMX8MM_EP,
 	IMX8MP_EP,
+	IMX8Q_EP,
 	IMX95_EP,
 };
 
@@ -121,6 +122,7 @@ struct imx_pcie_drvdata {
 	const char *gpr;
 	const char * const *clk_names;
 	const u32 clks_cnt;
+	const u32 clks_optional_cnt;
 	const u32 ltssm_off;
 	const u32 ltssm_mask;
 	const u32 mode_off[IMX_PCIE_MAX_INSTANCES];
@@ -254,11 +256,11 @@ static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
 
 	id = imx_pcie->controller_id;
 
-	/* If mode_mask is 0, then generic PHY driver is used to set the mode */
+	/* If mode_mask is 0, generic PHY driver is used to set the mode */
 	if (!drvdata->mode_mask[0])
 		return;
 
-	/* If mode_mask[id] is zero, means each controller have its individual gpr */
+	/* If mode_mask[id] is 0, each controller has its individual GPR */
 	if (!drvdata->mode_mask[id])
 		id = 0;
 
@@ -395,14 +397,15 @@ static int pcie_phy_write(struct imx_pcie *imx_pcie, int addr, u16 data)
 
 static int imx8mq_pcie_init_phy(struct imx_pcie *imx_pcie)
 {
-	/* TODO: Currently this code assumes external oscillator is being used */
+	/* TODO: This code assumes external oscillator is being used */
 	regmap_update_bits(imx_pcie->iomuxc_gpr,
 			   imx_pcie_grp_offset(imx_pcie),
 			   IMX8MQ_GPR_PCIE_REF_USE_PAD,
 			   IMX8MQ_GPR_PCIE_REF_USE_PAD);
 	/*
-	 * Regarding the datasheet, the PCIE_VPH is suggested to be 1.8V. If the PCIE_VPH is
-	 * supplied by 3.3V, the VREG_BYPASS should be cleared to zero.
+	 * Per the datasheet, the PCIE_VPH is suggested to be 1.8V.  If the
+	 * PCIE_VPH is supplied by 3.3V, the VREG_BYPASS should be cleared
+	 * to zero.
 	 */
 	if (imx_pcie->vph && regulator_get_voltage(imx_pcie->vph) > 3000000)
 		regmap_update_bits(imx_pcie->iomuxc_gpr,
@@ -413,13 +416,6 @@ static int imx8mq_pcie_init_phy(struct imx_pcie *imx_pcie)
 	return 0;
 }
 
-static int imx7d_pcie_init_phy(struct imx_pcie *imx_pcie)
-{
-	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
-
-	return 0;
-}
-
 static int imx_pcie_init_phy(struct imx_pcie *imx_pcie)
 {
 	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -596,7 +592,7 @@ static int imx_pcie_attach_pd(struct device *dev)
 			DL_FLAG_PM_RUNTIME |
 			DL_FLAG_RPM_ACTIVE);
 	if (!link) {
-		dev_err(dev, "Failed to add device_link to pcie pd.\n");
+		dev_err(dev, "Failed to add device_link to pcie pd\n");
 		return -EINVAL;
 	}
 
@@ -609,7 +605,7 @@ static int imx_pcie_attach_pd(struct device *dev)
 			DL_FLAG_PM_RUNTIME |
 			DL_FLAG_RPM_ACTIVE);
 	if (!link) {
-		dev_err(dev, "Failed to add device_link to pcie_phy pd.\n");
+		dev_err(dev, "Failed to add device_link to pcie_phy pd\n");
 		return -EINVAL;
 	}
 
@@ -618,10 +614,9 @@ static int imx_pcie_attach_pd(struct device *dev)
 
 static int imx6sx_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 {
-	if (enable)
-		regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				  IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
-
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
+			   enable ? 0 : IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
 	return 0;
 }
 
@@ -631,10 +626,10 @@ static int imx6q_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 		/* power up core phy and enable ref clock */
 		regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD);
 		/*
-		 * the async reset input need ref clock to sync internally,
+		 * The async reset input need ref clock to sync internally,
 		 * when the ref clock comes after reset, internal synced
 		 * reset time is too short, cannot meet the requirement.
-		 * add one ~10us delay here.
+		 * Add a ~10us delay here.
 		 */
 		usleep_range(10, 100);
 		regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN);
@@ -650,19 +645,20 @@ static int imx8mm_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 {
 	int offset = imx_pcie_grp_offset(imx_pcie);
 
-	if (enable) {
-		regmap_clear_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
-		regmap_set_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
-	}
-
+	regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
+			   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
+			   enable ? 0 : IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
+	regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
+			   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
+			   enable ? IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN : 0);
 	return 0;
 }
 
 static int imx7d_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 {
-	if (!enable)
-		regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+			   enable ? 0 : IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
 	return 0;
 }
 
@@ -795,6 +791,7 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
 static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
 {
 	reset_control_deassert(imx_pcie->pciephy_reset);
+	reset_control_deassert(imx_pcie->apps_reset);
 
 	if (imx_pcie->drvdata->core_reset)
 		imx_pcie->drvdata->core_reset(imx_pcie, false);
@@ -904,6 +901,7 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
 
 		if (imx_pcie->drvdata->flags &
 		    IMX_PCIE_FLAG_IMX_SPEED_CHANGE) {
+
 			/*
 			 * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
 			 * from i.MX6 family when no link speed transition
@@ -912,7 +910,6 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
 			 * which will cause the following code to report false
 			 * failure.
 			 */
-
 			ret = imx_pcie_wait_for_speed_change(imx_pcie);
 			if (ret) {
 				dev_err(dev, "Failed to bring link up!\n");
@@ -1167,7 +1164,9 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 			goto err_clk_disable;
 		}
 
-		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE,
+				       imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE ?
+						PHY_MODE_PCIE_EP : PHY_MODE_PCIE_RC);
 		if (ret) {
 			dev_err(dev, "unable to set PCIe PHY mode\n");
 			goto err_phy_exit;
@@ -1305,16 +1304,27 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
 	.align = SZ_64K,
 };
 
+static const struct pci_epc_features imx8q_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+	.bar[BAR_1] = { .type = BAR_RESERVED, },
+	.bar[BAR_3] = { .type = BAR_RESERVED, },
+	.bar[BAR_5] = { .type = BAR_RESERVED, },
+	.align = SZ_64K,
+};
+
 /*
- * BAR#	| Default BAR enable	| Default BAR Type	| Default BAR Size	| BAR Sizing Scheme
- * ================================================================================================
- * BAR0	| Enable		| 64-bit		| 1 MB			| Programmable Size
- * BAR1	| Disable		| 32-bit		| 64 KB			| Fixed Size
- *        BAR1 should be disabled if BAR0 is 64bit.
- * BAR2	| Enable		| 32-bit		| 1 MB			| Programmable Size
- * BAR3	| Enable		| 32-bit		| 64 KB			| Programmable Size
- * BAR4	| Enable		| 32-bit		| 1M			| Programmable Size
- * BAR5	| Enable		| 32-bit		| 64 KB			| Programmable Size
+ *     	| Default  | Default | Default | BAR Sizing
+ * BAR#	| Enable?  | Type    | Size    | Scheme
+ * =======================================================
+ * BAR0	| Enable   | 64-bit  |  1 MB   | Programmable Size
+ * BAR1	| Disable  | 32-bit  | 64 KB   | Fixed Size
+ *       (BAR1 should be disabled if BAR0 is 64-bit)
+ * BAR2	| Enable   | 32-bit  |  1 MB   | Programmable Size
+ * BAR3	| Enable   | 32-bit  | 64 KB   | Programmable Size
+ * BAR4	| Enable   | 32-bit  |  1 MB   | Programmable Size
+ * BAR5	| Enable   | 32-bit  | 64 KB   | Programmable Size
  */
 static const struct pci_epc_features imx95_pcie_epc_features = {
 	.msi_capable = true,
@@ -1341,7 +1351,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
 			   struct platform_device *pdev)
 {
 	int ret;
-	unsigned int pcie_dbi2_offset;
 	struct dw_pcie_ep *ep;
 	struct dw_pcie *pci = imx_pcie->pci;
 	struct dw_pcie_rp *pp = &pci->pp;
@@ -1351,28 +1360,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
 	ep = &pci->ep;
 	ep->ops = &pcie_ep_ops;
 
-	switch (imx_pcie->drvdata->variant) {
-	case IMX8MQ_EP:
-	case IMX8MM_EP:
-	case IMX8MP_EP:
-		pcie_dbi2_offset = SZ_1M;
-		break;
-	default:
-		pcie_dbi2_offset = SZ_4K;
-		break;
-	}
-
-	pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
-
-	/*
-	 * FIXME: Ideally, dbi2 base address should come from DT. But since only IMX95 is defining
-	 * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone so that the DWC
-	 * core code can fetch that from DT. But once all platform DTs were fixed, this and the
-	 * above "dbi_base2" setting should be removed.
-	 */
-	if (device_property_match_string(dev, "reg-names", "dbi2") >= 0)
-		pci->dbi_base2 = NULL;
-
 	if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_SUPPORT_64BIT))
 		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
 
@@ -1457,6 +1444,7 @@ static int imx_pcie_resume_noirq(struct device *dev)
 		ret = imx_pcie_deassert_core_reset(imx_pcie);
 		if (ret)
 			return ret;
+
 		/*
 		 * Using PCIE_TEST_PD seems to disable MSI and powers down the
 		 * root complex. This is why we have to setup the rc again and
@@ -1488,9 +1476,8 @@ static int imx_pcie_probe(struct platform_device *pdev)
 	struct device_node *np;
 	struct resource *dbi_base;
 	struct device_node *node = dev->of_node;
-	int ret;
+	int i, ret, req_cnt;
 	u16 val;
-	int i;
 
 	imx_pcie = devm_kzalloc(dev, sizeof(*imx_pcie), GFP_KERNEL);
 	if (!imx_pcie)
@@ -1546,9 +1533,13 @@ static int imx_pcie_probe(struct platform_device *pdev)
 		imx_pcie->clks[i].id = imx_pcie->drvdata->clk_names[i];
 
 	/* Fetch clocks */
-	ret = devm_clk_bulk_get(dev, imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
+	req_cnt = imx_pcie->drvdata->clks_cnt - imx_pcie->drvdata->clks_optional_cnt;
+	ret = devm_clk_bulk_get(dev, req_cnt, imx_pcie->clks);
 	if (ret)
 		return ret;
+	imx_pcie->clks[req_cnt].clk = devm_clk_get_optional(dev, "ref");
+	if (IS_ERR(imx_pcie->clks[req_cnt].clk))
+		return PTR_ERR(imx_pcie->clks[req_cnt].clk);
 
 	if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_PHYDRV)) {
 		imx_pcie->phy = devm_phy_get(dev, "pcie-phy");
@@ -1574,7 +1565,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
 	switch (imx_pcie->drvdata->variant) {
 	case IMX8MQ:
 	case IMX8MQ_EP:
-	case IMX7D:
 		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
 			imx_pcie->controller_id = 1;
 		break;
@@ -1690,6 +1680,7 @@ static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"};
 static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"};
 static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"};
 static const char * const imx8q_clks[] = {"mstr", "slv", "dbi"};
+static const char * const imx95_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux", "ref"};
 
 static const struct imx_pcie_drvdata drvdata[] = {
 	[IMX6Q] = {
@@ -1755,7 +1746,6 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.clks_cnt = ARRAY_SIZE(imx6q_clks),
 		.mode_off[0] = IOMUXC_GPR12,
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
-		.init_phy = imx7d_pcie_init_phy,
 		.enable_ref_clk = imx7d_pcie_enable_ref_clk,
 		.core_reset = imx7d_pcie_core_reset,
 	},
@@ -1811,8 +1801,9 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.flags = IMX_PCIE_FLAG_HAS_SERDES |
 			 IMX_PCIE_FLAG_HAS_LUT |
 			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
-		.clk_names = imx8mq_clks,
-		.clks_cnt = ARRAY_SIZE(imx8mq_clks),
+		.clk_names = imx95_clks,
+		.clks_cnt = ARRAY_SIZE(imx95_clks),
+		.clks_optional_cnt = 1,
 		.ltssm_off = IMX95_PE0_GEN_CTRL_3,
 		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
 		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
@@ -1861,6 +1852,14 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.epc_features = &imx8m_pcie_epc_features,
 		.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
 	},
+	[IMX8Q_EP] = {
+		.variant = IMX8Q_EP,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV,
+		.mode = DW_PCIE_EP_TYPE,
+		.epc_features = &imx8q_pcie_epc_features,
+		.clk_names = imx8q_clks,
+		.clks_cnt = ARRAY_SIZE(imx8q_clks),
+	},
 	[IMX95_EP] = {
 		.variant = IMX95_EP,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES |
@@ -1890,6 +1889,7 @@ static const struct of_device_id imx_pcie_of_match[] = {
 	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
 	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
 	{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+	{ .compatible = "fsl,imx8q-pcie-ep", .data = &drvdata[IMX8Q_EP], },
 	{ .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
 	{},
 };