diff options
| author | Enrico Zanda <e.zanda1@gmail.com> | 2025-04-15 20:34:42 +0200 |
|---|---|---|
| committer | Andi Shyti <andi@smida.it> | 2025-05-19 22:23:55 +0200 |
| commit | 61e26ca6920fc8f12747a2594bf8cc42f399cec9 (patch) | |
| tree | 3bdf5f35e286cc19246701af9814c192a146fe3b | |
| parent | 05ac621b1e538a248abcba6eaef41b769d1a368a (diff) | |
i2c: viapro: Replace dev_err() with dev_err_probe() in probe function
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-6-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
| -rw-r--r-- | drivers/i2c/busses/i2c-viapro.c | 33 |
1 files changed, 15 insertions, 18 deletions
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 2cc7bba3b8bf..c58843609107 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -330,30 +330,27 @@ static int vt596_probe(struct pci_dev *pdev, SMBHSTCFG = 0x84; } else { /* no matches at all */ - dev_err(&pdev->dev, "Cannot configure " - "SMBus I/O Base address\n"); - return -ENODEV; + return dev_err_probe(&pdev->dev, -ENODEV, + "Cannot configure " + "SMBus I/O Base address\n"); } } vt596_smba &= 0xfff0; - if (vt596_smba == 0) { - dev_err(&pdev->dev, "SMBus base address " - "uninitialized - upgrade BIOS or use " - "force_addr=0xaddr\n"); - return -ENODEV; - } + if (vt596_smba == 0) + return dev_err_probe(&pdev->dev, -ENODEV, "SMBus base address " + "uninitialized - upgrade BIOS or use " + "force_addr=0xaddr\n"); found: error = acpi_check_region(vt596_smba, 8, vt596_driver.name); if (error) return -ENODEV; - if (!request_region(vt596_smba, 8, vt596_driver.name)) { - dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", - vt596_smba); - return -ENODEV; - } + if (!request_region(vt596_smba, 8, vt596_driver.name)) + return dev_err_probe(&pdev->dev, -ENODEV, + "SMBus region 0x%x already in use!\n", + vt596_smba); pci_read_config_byte(pdev, SMBHSTCFG, &temp); /* If force_addr is set, we program the new address here. Just to make @@ -375,10 +372,10 @@ found: pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_info(&pdev->dev, "Enabling SMBus device\n"); } else { - dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " - "controller not enabled! - upgrade BIOS or " - "use force=1\n"); - error = -ENODEV; + error = dev_err_probe(&pdev->dev, -ENODEV, + "SMBUS: Error: Host SMBus " + "controller not enabled! - " + "upgrade BIOS or use force=1\n"); goto release_region; } } |