summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAkinobu Mita <mita@miraclelinux.com>2006-03-26 01:39:26 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-03-26 08:57:12 -0800
commit6d9f937b559d664b6f222cb91eca9c6802bfe89a (patch)
treef431c052f0c0d9f2d29bb6e39e3ff142f23e10c9
parent2875aef8bd0e42367a66a78ef7abe10f3bba27b5 (diff)
[PATCH] bitops: m32r: use generic bitops
- remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove find_{next,first}{,_zero}_bit() - remove __ffs() - remove generic_fls() - remove generic_fls64() - remove sched_find_first_bit() - remove generic_ffs() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r--arch/m32r/Kconfig8
-rw-r--r--include/asm-m32r/bitops.h457
2 files changed, 20 insertions, 445 deletions
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index a3dcc3fab4b7..05c864c6c2d9 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -214,6 +214,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool
default n
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
diff --git a/include/asm-m32r/bitops.h b/include/asm-m32r/bitops.h
index f8e993e0bbc0..902a366101a5 100644
--- a/include/asm-m32r/bitops.h
+++ b/include/asm-m32r/bitops.h
@@ -63,25 +63,6 @@ static __inline__ void set_bit(int nr, volatile void * addr)
}
/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __set_bit(int nr, volatile void * addr)
-{
- __u32 mask;
- volatile __u32 *a = addr;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
- *a |= mask;
-}
-
-/**
* clear_bit - Clears a bit in memory
* @nr: Bit to clear
* @addr: Address to start counting from
@@ -118,39 +99,10 @@ static __inline__ void clear_bit(int nr, volatile void * addr)
local_irq_restore(flags);
}
-static __inline__ void __clear_bit(int nr, volatile unsigned long * addr)
-{
- unsigned long mask;
- volatile unsigned long *a = addr;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
- *a &= ~mask;
-}
-
#define smp_mb__before_clear_bit() barrier()
#define smp_mb__after_clear_bit() barrier()
/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __change_bit(int nr, volatile void * addr)
-{
- __u32 mask;
- volatile __u32 *a = addr;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
- *a ^= mask;
-}
-
-/**
* change_bit - Toggle a bit in memory
* @nr: Bit to clear
* @addr: Address to start counting from
@@ -221,28 +173,6 @@ static __inline__ int test_and_set_bit(int nr, volatile void * addr)
}
/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
-{
- __u32 mask, oldbit;
- volatile __u32 *a = addr;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
- oldbit = (*a & mask);
- *a |= mask;
-
- return (oldbit != 0);
-}
-
-/**
* test_and_clear_bit - Clear a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
@@ -280,42 +210,6 @@ static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
}
/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
-{
- __u32 mask, oldbit;
- volatile __u32 *a = addr;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
- oldbit = (*a & mask);
- *a &= ~mask;
-
- return (oldbit != 0);
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
-{
- __u32 mask, oldbit;
- volatile __u32 *a = addr;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
- oldbit = (*a & mask);
- *a ^= mask;
-
- return (oldbit != 0);
-}
-
-/**
* test_and_change_bit - Change a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
@@ -350,353 +244,26 @@ static __inline__ int test_and_change_bit(int nr, volatile void * addr)
return (oldbit != 0);
}
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static __inline__ int test_bit(int nr, const volatile void * addr)
-{
- __u32 mask;
- const volatile __u32 *a = addr;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
-
- return ((*a & mask) != 0);
-}
-
-/**
- * ffz - find first zero in word.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static __inline__ unsigned long ffz(unsigned long word)
-{
- int k;
-
- word = ~word;
- k = 0;
- if (!(word & 0x0000ffff)) { k += 16; word >>= 16; }
- if (!(word & 0x000000ff)) { k += 8; word >>= 8; }
- if (!(word & 0x0000000f)) { k += 4; word >>= 4; }
- if (!(word & 0x00000003)) { k += 2; word >>= 2; }
- if (!(word & 0x00000001)) { k += 1; }
-
- return k;
-}
-
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-
-#define find_first_zero_bit(addr, size) \
- find_next_zero_bit((addr), (size), 0)
-
-/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static __inline__ int find_next_zero_bit(const unsigned long *addr,
- int size, int offset)
-{
- const unsigned long *p = addr + (offset >> 5);
- unsigned long result = offset & ~31UL;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 31UL;
- if (offset) {
- tmp = *(p++);
- tmp |= ~0UL >> (32-offset);
- if (size < 32)
- goto found_first;
- if (~tmp)
- goto found_middle;
- size -= 32;
- result += 32;
- }
- while (size & ~31UL) {
- if (~(tmp = *(p++)))
- goto found_middle;
- result += 32;
- size -= 32;
- }
- if (!size)
- return result;
- tmp = *p;
-
-found_first:
- tmp |= ~0UL << size;
-found_middle:
- return result + ffz(tmp);
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static __inline__ unsigned long __ffs(unsigned long word)
-{
- int k = 0;
-
- if (!(word & 0x0000ffff)) { k += 16; word >>= 16; }
- if (!(word & 0x000000ff)) { k += 8; word >>= 8; }
- if (!(word & 0x0000000f)) { k += 4; word >>= 4; }
- if (!(word & 0x00000003)) { k += 2; word >>= 2; }
- if (!(word & 0x00000001)) { k += 1;}
-
- return k;
-}
-
-/*
- * fls: find last bit set.
- */
-#define fls(x) generic_fls(x)
-#define fls64(x) generic_fls64(x)
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
#ifdef __KERNEL__
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(unsigned long *b)
-{
- if (unlikely(b[0]))
- return __ffs(b[0]);
- if (unlikely(b[1]))
- return __ffs(b[1]) + 32;
- if (unlikely(b[2]))
- return __ffs(b[2]) + 64;
- if (b[3])
- return __ffs(b[3]) + 96;
- return __ffs(b[4]) + 128;
-}
-
-/**
- * find_next_bit - find the first set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline unsigned long find_next_bit(const unsigned long *addr,
- unsigned long size, unsigned long offset)
-{
- unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
- unsigned int result = offset & ~31UL;
- unsigned int tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 31UL;
- if (offset) {
- tmp = *p++;
- tmp &= ~0UL << offset;
- if (size < 32)
- goto found_first;
- if (tmp)
- goto found_middle;
- size -= 32;
- result += 32;
- }
- while (size >= 32) {
- if ((tmp = *p++) != 0)
- goto found_middle;
- result += 32;
- size -= 32;
- }
- if (!size)
- return result;
- tmp = *p;
-
-found_first:
- tmp &= ~0UL >> (32 - size);
- if (tmp == 0UL) /* Are any bits set? */
- return result + size; /* Nope. */
-found_middle:
- return result + __ffs(tmp);
-}
-
-/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-#define find_first_bit(addr, size) \
- find_next_bit((addr), (size), 0)
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-#define ffs(x) generic_ffs(x)
-
-/**
- * hweightN - returns the hamming weight of a N-bit word
- * @x: the word to weigh
- *
- * The Hamming Weight of a number is the total number of bits set in it.
- */
-
-#define hweight32(x) generic_hweight32(x)
-#define hweight16(x) generic_hweight16(x)
-#define hweight8(x) generic_hweight8(x)
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
#endif /* __KERNEL__ */
#ifdef __KERNEL__
-/*
- * ext2_XXXX function
- * orig: include/asm-sh/bitops.h
- */
-
-#ifdef __LITTLE_ENDIAN__
-#define ext2_set_bit __test_and_set_bit
-#define ext2_clear_bit __test_and_clear_bit
-#define ext2_test_bit test_bit
-#define ext2_find_first_zero_bit find_first_zero_bit
-#define ext2_find_next_zero_bit find_next_zero_bit
-#else
-static inline int ext2_set_bit(int nr, volatile void * addr)
-{
- __u8 mask, oldbit;
- volatile __u8 *a = addr;
-
- a += (nr >> 3);
- mask = (1 << (nr & 0x07));
- oldbit = (*a & mask);
- *a |= mask;
-
- return (oldbit != 0);
-}
-
-static inline int ext2_clear_bit(int nr, volatile void * addr)
-{
- __u8 mask, oldbit;
- volatile __u8 *a = addr;
-
- a += (nr >> 3);
- mask = (1 << (nr & 0x07));
- oldbit = (*a & mask);
- *a &= ~mask;
-
- return (oldbit != 0);
-}
-
-static inline int ext2_test_bit(int nr, const volatile void * addr)
-{
- __u32 mask;
- const volatile __u8 *a = addr;
-
- a += (nr >> 3);
- mask = (1 << (nr & 0x07));
-
- return ((mask & *a) != 0);
-}
-
-#define ext2_find_first_zero_bit(addr, size) \
- ext2_find_next_zero_bit((addr), (size), 0)
-
-static inline unsigned long ext2_find_next_zero_bit(void *addr,
- unsigned long size, unsigned long offset)
-{
- unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
- unsigned long result = offset & ~31UL;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 31UL;
- if(offset) {
- /* We hold the little endian value in tmp, but then the
- * shift is illegal. So we could keep a big endian value
- * in tmp, like this:
- *
- * tmp = __swab32(*(p++));
- * tmp |= ~0UL >> (32-offset);
- *
- * but this would decrease preformance, so we change the
- * shift:
- */
- tmp = *(p++);
- tmp |= __swab32(~0UL >> (32-offset));
- if(size < 32)
- goto found_first;
- if(~tmp)
- goto found_middle;
- size -= 32;
- result += 32;
- }
- while(size & ~31UL) {
- if(~(tmp = *(p++)))
- goto found_middle;
- result += 32;
- size -= 32;
- }
- if(!size)
- return result;
- tmp = *p;
-
-found_first:
- /* tmp is little endian, so we would have to swab the shift,
- * see above. But then we have to swab tmp below for ffz, so
- * we might as well do this here.
- */
- return result + ffz(__swab32(tmp) | (~0UL << size));
-found_middle:
- return result + ffz(__swab32(tmp));
-}
-#endif
-
-#define ext2_set_bit_atomic(lock, nr, addr) \
- ({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_set_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
- })
-
-#define ext2_clear_bit_atomic(lock, nr, addr) \
- ({ \
- int ret; \
- spin_lock(lock); \
- ret = ext2_clear_bit((nr), (addr)); \
- spin_unlock(lock); \
- ret; \
- })
-
-/* Bitmap functions for the minix filesystem. */
-#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr)
-#define minix_set_bit(nr,addr) __set_bit(nr,addr)
-#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr)
-#define minix_test_bit(nr,addr) test_bit(nr,addr)
-#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
#endif /* __KERNEL__ */