pinctrl: samsung: add support for eint_fltcon_offset

On gs101 SoC the fltcon0 (filter configuration 0) offset isn't at a
fixed offset like previous SoCs as the fltcon1 register only exists when
there are more than 4 pins in the bank.

Add a eint_fltcon_offset and new GS101_PIN_BANK_EINT* macros that take
an additional fltcon_offs variable.

This can then be used in suspend/resume callbacks to save and restore
the fltcon0 and fltcon1 registers.

Fixes: 4a8be01a1a7a ("pinctrl: samsung: Add gs101 SoC pinctrl configuration")
Cc: stable@vger.kernel.org
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250307-pinctrl-fltcon-suspend-v4-1-2d775e486036@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

4 files changed, 76 insertions, 49 deletions

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index e35e5a8e23a0..dd07720e32cc 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -1677,83 +1677,83 @@ const struct samsung_pinctrl_of_match_data fsd_of_data __initconst = {
 
 /* pin banks of gs101 pin-controller (ALIVE) */
 static const struct samsung_pin_bank_data gs101_pin_alive[] = {
-	EXYNOS850_PIN_BANK_EINTW(8, 0x0, "gpa0", 0x00),
-	EXYNOS850_PIN_BANK_EINTW(7, 0x20, "gpa1", 0x04),
-	EXYNOS850_PIN_BANK_EINTW(5, 0x40, "gpa2", 0x08),
-	EXYNOS850_PIN_BANK_EINTW(4, 0x60, "gpa3", 0x0c),
-	EXYNOS850_PIN_BANK_EINTW(4, 0x80, "gpa4", 0x10),
-	EXYNOS850_PIN_BANK_EINTW(7, 0xa0, "gpa5", 0x14),
-	EXYNOS850_PIN_BANK_EINTW(8, 0xc0, "gpa9", 0x18),
-	EXYNOS850_PIN_BANK_EINTW(2, 0xe0, "gpa10", 0x1c),
+	GS101_PIN_BANK_EINTW(8, 0x0, "gpa0", 0x00, 0x00),
+	GS101_PIN_BANK_EINTW(7, 0x20, "gpa1", 0x04, 0x08),
+	GS101_PIN_BANK_EINTW(5, 0x40, "gpa2", 0x08, 0x10),
+	GS101_PIN_BANK_EINTW(4, 0x60, "gpa3", 0x0c, 0x18),
+	GS101_PIN_BANK_EINTW(4, 0x80, "gpa4", 0x10, 0x1c),
+	GS101_PIN_BANK_EINTW(7, 0xa0, "gpa5", 0x14, 0x20),
+	GS101_PIN_BANK_EINTW(8, 0xc0, "gpa9", 0x18, 0x28),
+	GS101_PIN_BANK_EINTW(2, 0xe0, "gpa10", 0x1c, 0x30),
 };
 
 /* pin banks of gs101 pin-controller (FAR_ALIVE) */
 static const struct samsung_pin_bank_data gs101_pin_far_alive[] = {
-	EXYNOS850_PIN_BANK_EINTW(8, 0x0, "gpa6", 0x00),
-	EXYNOS850_PIN_BANK_EINTW(4, 0x20, "gpa7", 0x04),
-	EXYNOS850_PIN_BANK_EINTW(8, 0x40, "gpa8", 0x08),
-	EXYNOS850_PIN_BANK_EINTW(2, 0x60, "gpa11", 0x0c),
+	GS101_PIN_BANK_EINTW(8, 0x0, "gpa6", 0x00, 0x00),
+	GS101_PIN_BANK_EINTW(4, 0x20, "gpa7", 0x04, 0x08),
+	GS101_PIN_BANK_EINTW(8, 0x40, "gpa8", 0x08, 0x0c),
+	GS101_PIN_BANK_EINTW(2, 0x60, "gpa11", 0x0c, 0x14),
 };
 
 /* pin banks of gs101 pin-controller (GSACORE) */
 static const struct samsung_pin_bank_data gs101_pin_gsacore[] = {
-	EXYNOS850_PIN_BANK_EINTG(2, 0x0, "gps0", 0x00),
-	EXYNOS850_PIN_BANK_EINTG(8, 0x20, "gps1", 0x04),
-	EXYNOS850_PIN_BANK_EINTG(3, 0x40, "gps2", 0x08),
+	GS101_PIN_BANK_EINTG(2, 0x0, "gps0", 0x00, 0x00),
+	GS101_PIN_BANK_EINTG(8, 0x20, "gps1", 0x04, 0x04),
+	GS101_PIN_BANK_EINTG(3, 0x40, "gps2", 0x08, 0x0c),
 };
 
 /* pin banks of gs101 pin-controller (GSACTRL) */
 static const struct samsung_pin_bank_data gs101_pin_gsactrl[] = {
-	EXYNOS850_PIN_BANK_EINTW(6, 0x0, "gps3", 0x00),
+	GS101_PIN_BANK_EINTW(6, 0x0, "gps3", 0x00, 0x00),
 };
 
 /* pin banks of gs101 pin-controller (PERIC0) */
 static const struct samsung_pin_bank_data gs101_pin_peric0[] = {
-	EXYNOS850_PIN_BANK_EINTG(5, 0x0, "gpp0", 0x00),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x20, "gpp1", 0x04),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x40, "gpp2", 0x08),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x60, "gpp3", 0x0c),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x80, "gpp4", 0x10),
-	EXYNOS850_PIN_BANK_EINTG(2, 0xa0, "gpp5", 0x14),
-	EXYNOS850_PIN_BANK_EINTG(4, 0xc0, "gpp6", 0x18),
-	EXYNOS850_PIN_BANK_EINTG(2, 0xe0, "gpp7", 0x1c),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x100, "gpp8", 0x20),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x120, "gpp9", 0x24),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x140, "gpp10", 0x28),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x160, "gpp11", 0x2c),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x180, "gpp12", 0x30),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x1a0, "gpp13", 0x34),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x1c0, "gpp14", 0x38),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x1e0, "gpp15", 0x3c),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x200, "gpp16", 0x40),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x220, "gpp17", 0x44),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x240, "gpp18", 0x48),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x260, "gpp19", 0x4c),
+	GS101_PIN_BANK_EINTG(5, 0x0, "gpp0", 0x00, 0x00),
+	GS101_PIN_BANK_EINTG(4, 0x20, "gpp1", 0x04, 0x08),
+	GS101_PIN_BANK_EINTG(4, 0x40, "gpp2", 0x08, 0x0c),
+	GS101_PIN_BANK_EINTG(2, 0x60, "gpp3", 0x0c, 0x10),
+	GS101_PIN_BANK_EINTG(4, 0x80, "gpp4", 0x10, 0x14),
+	GS101_PIN_BANK_EINTG(2, 0xa0, "gpp5", 0x14, 0x18),
+	GS101_PIN_BANK_EINTG(4, 0xc0, "gpp6", 0x18, 0x1c),
+	GS101_PIN_BANK_EINTG(2, 0xe0, "gpp7", 0x1c, 0x20),
+	GS101_PIN_BANK_EINTG(4, 0x100, "gpp8", 0x20, 0x24),
+	GS101_PIN_BANK_EINTG(2, 0x120, "gpp9", 0x24, 0x28),
+	GS101_PIN_BANK_EINTG(4, 0x140, "gpp10", 0x28, 0x2c),
+	GS101_PIN_BANK_EINTG(2, 0x160, "gpp11", 0x2c, 0x30),
+	GS101_PIN_BANK_EINTG(4, 0x180, "gpp12", 0x30, 0x34),
+	GS101_PIN_BANK_EINTG(2, 0x1a0, "gpp13", 0x34, 0x38),
+	GS101_PIN_BANK_EINTG(4, 0x1c0, "gpp14", 0x38, 0x3c),
+	GS101_PIN_BANK_EINTG(2, 0x1e0, "gpp15", 0x3c, 0x40),
+	GS101_PIN_BANK_EINTG(4, 0x200, "gpp16", 0x40, 0x44),
+	GS101_PIN_BANK_EINTG(2, 0x220, "gpp17", 0x44, 0x48),
+	GS101_PIN_BANK_EINTG(4, 0x240, "gpp18", 0x48, 0x4c),
+	GS101_PIN_BANK_EINTG(4, 0x260, "gpp19", 0x4c, 0x50),
 };
 
 /* pin banks of gs101 pin-controller (PERIC1) */
 static const struct samsung_pin_bank_data gs101_pin_peric1[] = {
-	EXYNOS850_PIN_BANK_EINTG(8, 0x0, "gpp20", 0x00),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x20, "gpp21", 0x04),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x40, "gpp22", 0x08),
-	EXYNOS850_PIN_BANK_EINTG(8, 0x60, "gpp23", 0x0c),
-	EXYNOS850_PIN_BANK_EINTG(4, 0x80, "gpp24", 0x10),
-	EXYNOS850_PIN_BANK_EINTG(4, 0xa0, "gpp25", 0x14),
-	EXYNOS850_PIN_BANK_EINTG(5, 0xc0, "gpp26", 0x18),
-	EXYNOS850_PIN_BANK_EINTG(4, 0xe0, "gpp27", 0x1c),
+	GS101_PIN_BANK_EINTG(8, 0x0, "gpp20", 0x00, 0x00),
+	GS101_PIN_BANK_EINTG(4, 0x20, "gpp21", 0x04, 0x08),
+	GS101_PIN_BANK_EINTG(2, 0x40, "gpp22", 0x08, 0x0c),
+	GS101_PIN_BANK_EINTG(8, 0x60, "gpp23", 0x0c, 0x10),
+	GS101_PIN_BANK_EINTG(4, 0x80, "gpp24", 0x10, 0x18),
+	GS101_PIN_BANK_EINTG(4, 0xa0, "gpp25", 0x14, 0x1c),
+	GS101_PIN_BANK_EINTG(5, 0xc0, "gpp26", 0x18, 0x20),
+	GS101_PIN_BANK_EINTG(4, 0xe0, "gpp27", 0x1c, 0x28),
 };
 
 /* pin banks of gs101 pin-controller (HSI1) */
 static const struct samsung_pin_bank_data gs101_pin_hsi1[] = {
-	EXYNOS850_PIN_BANK_EINTG(6, 0x0, "gph0", 0x00),
-	EXYNOS850_PIN_BANK_EINTG(7, 0x20, "gph1", 0x04),
+	GS101_PIN_BANK_EINTG(6, 0x0, "gph0", 0x00, 0x00),
+	GS101_PIN_BANK_EINTG(7, 0x20, "gph1", 0x04, 0x08),
 };
 
 /* pin banks of gs101 pin-controller (HSI2) */
 static const struct samsung_pin_bank_data gs101_pin_hsi2[] = {
-	EXYNOS850_PIN_BANK_EINTG(6, 0x0, "gph2", 0x00),
-	EXYNOS850_PIN_BANK_EINTG(2, 0x20, "gph3", 0x04),
-	EXYNOS850_PIN_BANK_EINTG(6, 0x40, "gph4", 0x08),
+	GS101_PIN_BANK_EINTG(6, 0x0, "gph2", 0x00, 0x00),
+	GS101_PIN_BANK_EINTG(2, 0x20, "gph3", 0x04, 0x08),
+	GS101_PIN_BANK_EINTG(6, 0x40, "gph4", 0x08, 0x0c),
 };
 
 static const struct samsung_pin_ctrl gs101_pin_ctrl[] __initconst = {
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index f78da2e4cda8..b483270ddc53 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -194,6 +194,28 @@
 		.name			= id				\
 	}
 
+#define GS101_PIN_BANK_EINTG(pins, reg, id, offs, fltcon_offs) \
+	{							\
+		.type			= &exynos850_bank_type_off,	\
+		.pctl_offset		= reg,			\
+		.nr_pins		= pins,			\
+		.eint_type		= EINT_TYPE_GPIO,	\
+		.eint_offset		= offs,			\
+		.eint_fltcon_offset	= fltcon_offs,		\
+		.name			= id			\
+	}
+
+#define GS101_PIN_BANK_EINTW(pins, reg, id, offs, fltcon_offs) \
+	{								\
+		.type			= &exynos850_bank_type_alive,	\
+		.pctl_offset		= reg,				\
+		.nr_pins		= pins,				\
+		.eint_type		= EINT_TYPE_WKUP,		\
+		.eint_offset		= offs,				\
+		.eint_fltcon_offset	= fltcon_offs,			\
+		.name			= id				\
+	}
+
 /**
  * struct exynos_weint_data: irq specific data for all the wakeup interrupts
  * generated by the external wakeup interrupt controller.
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 24e96d919d8f..2896eb2de2c0 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1230,6 +1230,7 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
 		bank->eint_con_offset = bdata->eint_con_offset;
 		bank->eint_mask_offset = bdata->eint_mask_offset;
 		bank->eint_pend_offset = bdata->eint_pend_offset;
+		bank->eint_fltcon_offset = bdata->eint_fltcon_offset;
 		bank->name = bdata->name;
 
 		raw_spin_lock_init(&bank->slock);
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 2f452f592655..3cf758df7d69 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -144,6 +144,7 @@ struct samsung_pin_bank_type {
  * @eint_con_offset: ExynosAuto SoC-specific EINT control register offset of bank.
  * @eint_mask_offset: ExynosAuto SoC-specific EINT mask register offset of bank.
  * @eint_pend_offset: ExynosAuto SoC-specific EINT pend register offset of bank.
+ * @eint_fltcon_offset: GS101 SoC-specific EINT filter config register offset.
  * @name: name to be prefixed for each pin in this pin bank.
  */
 struct samsung_pin_bank_data {
@@ -158,6 +159,7 @@ struct samsung_pin_bank_data {
 	u32		eint_con_offset;
 	u32		eint_mask_offset;
 	u32		eint_pend_offset;
+	u32		eint_fltcon_offset;
 	const char	*name;
 };
 
@@ -175,6 +177,7 @@ struct samsung_pin_bank_data {
  * @eint_con_offset: ExynosAuto SoC-specific EINT register or interrupt offset of bank.
  * @eint_mask_offset: ExynosAuto SoC-specific EINT mask register offset of bank.
  * @eint_pend_offset: ExynosAuto SoC-specific EINT pend register offset of bank.
+ * @eint_fltcon_offset: GS101 SoC-specific EINT filter config register offset.
  * @name: name to be prefixed for each pin in this pin bank.
  * @id: id of the bank, propagated to the pin range.
  * @pin_base: starting pin number of the bank.
@@ -201,6 +204,7 @@ struct samsung_pin_bank {
 	u32		eint_con_offset;
 	u32		eint_mask_offset;
 	u32		eint_pend_offset;
+	u32		eint_fltcon_offset;
 	const char	*name;
 	u32		id;