diff options
| author | Binbin Zhou <zhoubinbin@loongson.cn> | 2025-02-20 20:56:12 +0800 |
|---|---|---|
| committer | Andi Shyti <andi.shyti@kernel.org> | 2025-02-26 23:23:33 +0100 |
| commit | 71c49ee9bb41e1709abac7e2eb05f9193222e580 (patch) | |
| tree | 005193c4e29be7957558d8c86dd6ab60e9c671e8 | |
| parent | dd1998e243f5fa25d348a384ba0b6c84d980f2b2 (diff) | |
i2c: ls2x: Fix frequency division register access
According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb()/writeb()).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Fixes: 015e61f0bffd ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250220125612.1910990-1-zhoubinbin@loongson.cn
| -rw-r--r-- | drivers/i2c/busses/i2c-ls2x.c | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/drivers/i2c/busses/i2c-ls2x.c b/drivers/i2c/busses/i2c-ls2x.c index 8821cac3897b..b475dd27b7af 100644 --- a/drivers/i2c/busses/i2c-ls2x.c +++ b/drivers/i2c/busses/i2c-ls2x.c @@ -10,6 +10,7 @@ * Rewritten for mainline by Binbin Zhou <zhoubinbin@loongson.cn> */ +#include <linux/bitfield.h> #include <linux/bits.h> #include <linux/completion.h> #include <linux/device.h> @@ -26,7 +27,8 @@ #include <linux/units.h> /* I2C Registers */ -#define I2C_LS2X_PRER 0x0 /* Freq Division Register(16 bits) */ +#define I2C_LS2X_PRER_LO 0x0 /* Freq Division Low Byte Register */ +#define I2C_LS2X_PRER_HI 0x1 /* Freq Division High Byte Register */ #define I2C_LS2X_CTR 0x2 /* Control Register */ #define I2C_LS2X_TXR 0x3 /* Transport Data Register */ #define I2C_LS2X_RXR 0x3 /* Receive Data Register */ @@ -93,6 +95,7 @@ static irqreturn_t ls2x_i2c_isr(int this_irq, void *dev_id) */ static void ls2x_i2c_adjust_bus_speed(struct ls2x_i2c_priv *priv) { + u16 val; struct i2c_timings *t = &priv->i2c_t; struct device *dev = priv->adapter.dev.parent; u32 acpi_speed = i2c_acpi_find_bus_speed(dev); @@ -104,9 +107,14 @@ static void ls2x_i2c_adjust_bus_speed(struct ls2x_i2c_priv *priv) else t->bus_freq_hz = LS2X_I2C_FREQ_STD; - /* Calculate and set i2c frequency. */ - writew(LS2X_I2C_PCLK_FREQ / (5 * t->bus_freq_hz) - 1, - priv->base + I2C_LS2X_PRER); + /* + * According to the chip manual, we can only access the registers as bytes, + * otherwise the high bits will be truncated. + * So set the I2C frequency with a sequential writeb() instead of writew(). + */ + val = LS2X_I2C_PCLK_FREQ / (5 * t->bus_freq_hz) - 1; + writeb(FIELD_GET(GENMASK(7, 0), val), priv->base + I2C_LS2X_PRER_LO); + writeb(FIELD_GET(GENMASK(15, 8), val), priv->base + I2C_LS2X_PRER_HI); } static void ls2x_i2c_init(struct ls2x_i2c_priv *priv) |