diff options
| author | Ahmad Fatoum <a.fatoum@pengutronix.de> | 2022-05-13 16:57:01 +0200 |
|---|---|---|
| committer | Jarkko Sakkinen <jarkko@kernel.org> | 2022-05-23 18:47:50 +0300 |
| commit | 7a0e7d5265f58eab5983f6560817d4fe9943743b (patch) | |
| tree | ffea767113f5ac62367d676fc752fd0ecc7f5d5f | |
| parent | fcd7c26901c83681532c6daac599e53d4df11738 (diff) | |
crypto: caam - determine whether CAAM supports blob encap/decap
Depending on SoC variant, a CAAM may be available, but with some futures
fused out. The LS1028A (non-E) SoC is one such SoC and while it
indicates BLOB support, BLOB operations will ultimately fail, because
there is no AES support. Add a new blob_present member to reflect
whether both BLOB support and the AES support it depends on is
available.
These will be used in a follow-up commit to allow blob driver
initialization to error out on SoCs without the necessary hardware
support instead of failing at runtime with a cryptic
caam_jr 8020000.jr: 20000b0f: CCB: desc idx 11: : Invalid CHA selected.
Co-developed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E)
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
| -rw-r--r-- | drivers/crypto/caam/ctrl.c | 17 | ||||
| -rw-r--r-- | drivers/crypto/caam/intern.h | 1 | ||||
| -rw-r--r-- | drivers/crypto/caam/regs.h | 4 |
3 files changed, 19 insertions, 3 deletions
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index ca0361b2dbb0..38c4d88a9d03 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -820,12 +820,25 @@ static int caam_probe(struct platform_device *pdev) return -ENOMEM; } - if (ctrlpriv->era < 10) + comp_params = rd_reg32(&ctrl->perfmon.comp_parms_ls); + ctrlpriv->blob_present = !!(comp_params & CTPR_LS_BLOB); + + /* + * Some SoCs like the LS1028A (non-E) indicate CTPR_LS_BLOB support, + * but fail when actually using it due to missing AES support, so + * check both here. + */ + if (ctrlpriv->era < 10) { rng_vid = (rd_reg32(&ctrl->perfmon.cha_id_ls) & CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT; - else + ctrlpriv->blob_present = ctrlpriv->blob_present && + (rd_reg32(&ctrl->perfmon.cha_num_ls) & CHA_ID_LS_AES_MASK); + } else { rng_vid = (rd_reg32(&ctrl->vreg.rng) & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT; + ctrlpriv->blob_present = ctrlpriv->blob_present && + (rd_reg32(&ctrl->vreg.aesa) & CHA_VER_MISC_AES_NUM_MASK); + } /* * If SEC has RNG version >= 4 and RNG state handle has not been diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h index 7d45b21bd55a..e92210e2ab76 100644 --- a/drivers/crypto/caam/intern.h +++ b/drivers/crypto/caam/intern.h @@ -92,6 +92,7 @@ struct caam_drv_private { */ u8 total_jobrs; /* Total Job Rings in device */ u8 qi_present; /* Nonzero if QI present in device */ + u8 blob_present; /* Nonzero if BLOB support present in device */ u8 mc_en; /* Nonzero if MC f/w is active */ int secvio_irq; /* Security violation interrupt number */ int virt_en; /* Virtualization enabled in CAAM */ diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h index 3738625c0250..66d6dad841bb 100644 --- a/drivers/crypto/caam/regs.h +++ b/drivers/crypto/caam/regs.h @@ -320,7 +320,8 @@ struct version_regs { #define CHA_VER_VID_MASK (0xffull << CHA_VER_VID_SHIFT) /* CHA Miscellaneous Information - AESA_MISC specific */ -#define CHA_VER_MISC_AES_GCM BIT(1 + CHA_VER_MISC_SHIFT) +#define CHA_VER_MISC_AES_NUM_MASK GENMASK(7, 0) +#define CHA_VER_MISC_AES_GCM BIT(1 + CHA_VER_MISC_SHIFT) /* CHA Miscellaneous Information - PKHA_MISC specific */ #define CHA_VER_MISC_PKHA_NO_CRYPT BIT(7 + CHA_VER_MISC_SHIFT) @@ -414,6 +415,7 @@ struct caam_perfmon { #define CTPR_MS_PG_SZ_MASK 0x10 #define CTPR_MS_PG_SZ_SHIFT 4 u32 comp_parms_ms; /* CTPR - Compile Parameters Register */ +#define CTPR_LS_BLOB BIT(1) u32 comp_parms_ls; /* CTPR - Compile Parameters Register */ u64 rsvd1[2]; |