Merge tag 'arm-soc/for-4.11/devicetree' of http://github.com/Broadcom/stblinux into next/dt

This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11,
please pull the following changes:

- Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since
  every device found out there has it enabled by default. He also fixes the
  LED definitions for the Luxul XWR-3100 device, enables USB controllers and
  their respective PHY devices, specifies the correct GPIO to power on USB
  HUBs, adds the additional RAM bank for somes devices, and finally sets the
  correct 5Ghz frequency limits on the Netgear R8000

- Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit
  addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports
  to the BCM958625K reference board, enables 3rd Ethernet MAC instance to
  relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC
  support to the XMC board

- Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files
  ands enables it on the relevant boards

- Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both
  BCM47081 based SoCs

* tag 'arm-soc/for-4.11/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards
  ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi
  ARM: dts: BCM5301X: Add DT for Luxul XWR-1200
  ARM: dts: BCM5301X: Add DT for Luxul XAP-1410
  ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000
  ARM: dts: NSP: Add SD/MMC support
  ARM: dts: NSP: Add Ethernet to NSP XMC
  ARM: dts: NSP: Add and enable amac2
  ARM: dts: NSP: Add BCM958625K switch ports
  ARM: dts: NSP: Add QSPI support to missing boards
  ARM: dts: NSP: Correct NAND partition unit address
  ARM: dts: NSP: DT Clean-ups
  ARM: dts: BCM53573: Specify USB ports of on-SoC controllers
  ARM: dts: BCM5301X: Specify all RAM by including an extra block
  ARM: dts: BCM5301X: Set GPIO enabling USB power on Netgear R7000
  ARM: dts: BCM5301X: Specify USB controllers in DT
  ARM: dts: BCM5301X: Fix LAN LED labels for Luxul XWR-3100
  ARM: dts: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012

Signed-off-by: Olof Johansson <olof@lixom.net>

43 files changed, 813 insertions, 172 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ff009eb490ab..fe5f8a964257 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -85,6 +85,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47081-asus-rt-n18u.dtb \
 	bcm47081-buffalo-wzr-600dhp2.dtb \
 	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
 	bcm4709-asus-rt-ac87u.dtb \
 	bcm4709-buffalo-wxr-1900dhp.dtb \
 	bcm4709-netgear-r7000.dtb \
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index b6142bda661e..6c58c7854dd5 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -209,6 +209,15 @@
 			#dma-cells = <1>;
 		};
 
+		sdio: sdhci@21000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x21000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			sdhci,auto-cmd12;
+			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+			status = "disabled";
+		};
+
 		amac0: ethernet@22000 {
 			compatible = "brcm,nsp-amac";
 			reg = <0x022000 0x1000>,
@@ -227,6 +236,15 @@
 			status = "disabled";
 		};
 
+		amac2: ethernet@24000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x024000 0x1000>,
+			      <0x112000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		nand: nand@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
@@ -241,29 +259,6 @@
 			brcm,nand-has-wp;
 		};
 
-		gpiob: gpio@30000 {
-			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
-			reg = <0x30000 0x50>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			ngpios = <4>;
-			interrupt-controller;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pwm: pwm@31000 {
-			compatible = "brcm,iproc-pwm";
-			reg = <0x31000 0x28>;
-			clocks = <&osc>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		rng: rng@33000 {
-			compatible = "brcm,bcm-nsp-rng";
-			reg = <0x33000 0x14>;
-		};
-
 		qspi: qspi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
@@ -293,6 +288,29 @@
 			#size-cells = <0>;
 		};
 
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
 		ccbtimer0: timer@34000 {
 			compatible = "arm,sp804";
 			reg = <0x34000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 6ddf7dfe3f72..38e6050035bc 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -87,3 +87,8 @@
 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
 	status = "okay";
 };
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 9a44da190897..a3106aa446c6 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -476,6 +476,14 @@
 			status = "disabled";
 		};
 
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
 		pixelvalve@7e807000 {
 			compatible = "brcm,bcm2835-pixelvalve2";
 			reg = <0x7e807000 0x100>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 112a5a834ddc..d241cee4bfcc 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3600f56f46f4..b0e62042f62f 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 9cb186ea2e97..c9ba6b964b38 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x18000000>;
 	};
 
 	spi {
@@ -136,10 +137,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &usb2 {
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 35e6ed6a3ef7..f591b0f256d8 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -55,10 +55,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &spi_nor {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 1c7e53d60aa4..50d65d8fbd9a 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -56,10 +56,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &spi_nor {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 8ce39d58eeb8..b9f66c0fae27 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
@@ -83,10 +84,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &usb3 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 6229ef283c41..ae0199f6c7a2 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 70f4bb9d864a..36b628b190d7 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
@@ -119,10 +120,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &spi_nor {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index eed4dd159995..d0eec099f1f8 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -34,3 +34,7 @@
 	};
 
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index 71b98cfaf944..db8608be0ee7 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index a9c8defed4d3..d51586d95b9a 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	spi {
@@ -122,7 +123,3 @@
 		};
 	};
 };
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 184fd9214110..de041b8c3342 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 000000000000..9b5759849983
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
new file mode 100644
index 000000000000..c544ab302012
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XWR-1200 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
index f720012ee5ed..c5f7619af4a6 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -24,3 +24,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index eac0f52e5ebd..eaca6876db0f 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index aab39c9864da..b32957ca9443 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index fd38d2aa3521..f459a98a72c6 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
@@ -101,6 +102,10 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 92f8a7219e98..8e39a84e5bf9 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
@@ -107,8 +108,52 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ieee80211-freq-limit = <5735000 5835000>;
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@1,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		bridge@1,1,0 {
+			reg = <0x0000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bridge@1,2,2 {
+				reg = <0x1000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@1,4,0 {
+					reg = <0x0000 0 0 0 0>;
+					ieee80211-freq-limit = <5170000 5730000>;
+				};
+			};
+		};
+	};
 };
 
 &usb2 {
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index 9a92c24ac2d8..c67bfaa0c8e8 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -97,10 +97,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &usb2 {
 	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
index f03976597a6d..c645fea2b7f7 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -8,4 +8,5 @@
 
 &uart0 {
 	clock-frequency = <125000000>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 661348dbb7ce..64ded7643e9f 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -21,7 +21,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	nand: nand@18028000 {
@@ -105,10 +106,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index 169b35fe5651..5cf4ab1ebe85 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -18,7 +18,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
 	};
 
 	leds {
@@ -31,13 +32,13 @@
 		};
 
 		lan3	{
-			label = "bcm53xx:green:lan1";
+			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
 
 		lan4	{
-			label = "bcm53xx:green:lan0";
+			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
@@ -49,7 +50,7 @@
 		};
 
 		lan1	{
-			label = "bcm53xx:green:lan3";
+			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
@@ -98,10 +99,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 521b4155de60..600795ee1aed 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -18,7 +18,8 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x18000000>;
 	};
 
 	leds {
@@ -97,7 +98,3 @@
 		};
 	};
 };
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 4f09aa0114e6..4840a782fc05 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -14,4 +14,5 @@
 
 &uart0 {
 	clock-frequency = <125000000>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index f09a2bb08979..4fbb089cf5ad 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -243,13 +243,39 @@
 			#gpio-cells = <2>;
 		};
 
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+		};
+
 		usb2: usb2@21000 {
 			reg = <0x00021000 0x1000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: ehci@21000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+			};
+
+			ohci: ohci@22000 {
+				#usb-cells = <0>;
 
-			phys = <&usb2_phy>;
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		usb3: usb3@23000 {
@@ -257,6 +283,19 @@
 
 			#address-cells = <1>;
 			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: xhci@23000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+			};
 		};
 
 		spi@29000 {
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index e2c496a96c32..2da04d0a7348 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -124,6 +124,17 @@
 				reg = <0x4000 0x1000>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+				};
 			};
 
 			ohci: ohci@d000 {
@@ -133,6 +144,17 @@
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
index 251a486f2da6..42855a7c1bfa 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -50,7 +50,3 @@
 		reg = <0x00000000 0x08000000>;
 	};
 };
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
index b16cac92904f..95e8be65f2f1 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -50,7 +50,3 @@
 		reg = <0x00000000 0x08000000>;
 	};
 };
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 0a9abecf9423..decd86bae901 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -70,10 +70,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &spi_nor {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 05a985a20378..bfd923096a8c 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -54,7 +54,6 @@
 
 &uart0 {
 	clock-frequency = <62499840>;
-	status = "okay";
 };
 
 &uart1 {
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index a21b0fd21f4e..3f04a40eb90c 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -65,7 +65,6 @@
 	status = "okay";
 };
 
-
 &amac1 {
 	status = "okay";
 };
@@ -125,6 +124,40 @@
 	};
 };
 
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index be7f2f8ecf39..9fd542200d3d 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -65,7 +65,6 @@
 	status = "okay";
 };
 
-
 &amac1 {
 	status = "okay";
 };
@@ -125,6 +124,40 @@
 	};
 };
 
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
 &sata_phy0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 959cde911c3c..41e7fd350fcd 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -59,6 +59,12 @@
 	};
 };
 
+/* XHCI support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
 &i2c0 {
 	temperature-sensor@4c {
 		compatible = "adi,adt7461a";
@@ -115,12 +121,6 @@
 	};
 };
 
-/* XHCI, MMC, and Ethernet support needed to be complete */
-
-&uart0 {
-	status = "okay";
-};
-
 &pcie0 {
 	status = "okay";
 };
@@ -129,6 +129,49 @@
 	status = "okay";
 };
 
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
 &sata_phy0 {
 	status = "okay";
 };
@@ -141,11 +184,10 @@
 	status = "okay";
 };
 
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
-	nand_sel: nand_sel {
-		function = "nand";
-		groups = "nand_grp";
-	};
+&sdio {
+	status = "ok";
+};
+
+&uart0 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index ad2aa87dd15a..477c4860db52 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -65,6 +65,14 @@
 	status = "okay";
 };
 
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -120,6 +128,40 @@
 	};
 };
 
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
 &srab {
 	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
 	status = "okay";
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 4ceb8fef8041..c0a499d5ba44 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -65,6 +65,14 @@
 	status = "okay";
 };
 
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -120,6 +128,48 @@
 	};
 };
 
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
 &srab {
 	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
 	status = "okay";
@@ -165,14 +215,6 @@
 	};
 };
 
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 442002597063..f7eb5854a224 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -1,7 +1,7 @@
 /*
  *  BSD LICENSE
  *
- *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions
@@ -59,6 +59,18 @@
 	};
 };
 
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -97,10 +109,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
 &pcie0 {
 	status = "okay";
 };
@@ -118,7 +126,49 @@
 	};
 };
 
-&amac0 {
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
 	status = "okay";
 };
 
@@ -167,14 +217,6 @@
 	};
 };
 
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata_phy1 {
-	status = "okay";
-};
-
-&sata {
+&uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 59d96fb91583..f8d47e517e18 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -53,14 +53,6 @@
 	};
 };
 
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
 &amac0 {
 	status = "okay";
 };
@@ -69,27 +61,7 @@
 	status = "okay";
 };
 
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
-
-&sata_phy0 {
-	status = "okay";
-};
-
-&sata_phy1 {
-	status = "okay";
-};
-
-&sata {
+&amac2 {
 	status = "okay";
 };
 
@@ -112,32 +84,65 @@
 			reg = <0x00000000 0x00200000>;
 			read-only;
 		};
-		partition@1 {
+		partition@200000 {
 			label = "nenv";
 			reg = <0x00200000 0x00400000>;
 		};
-		partition@2 {
+		partition@600000 {
 			label = "nsystem";
 			reg = <0x00600000 0x00a00000>;
 		};
-		partition@3 {
+		partition@1000000 {
 			label = "nrootfs";
 			reg = <0x01000000 0x03000000>;
 		};
-		partition@4 {
+		partition@4000000 {
 			label = "ncustfs";
 			reg = <0x04000000 0x3c000000>;
 		};
 	};
 };
 
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&nand_sel>;
+	pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
+
 	nand_sel: nand_sel {
 		function = "nand";
 		groups = "nand_grp";
 	};
+
+	gpiobs: gpiobs {
+		function = "gpio_b";
+		groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
+			 "gpio_b_3_grp";
+	};
+
+	pwmc: pwmc {
+		function = "pwm";
+		groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+
+	emmc_sel: emmc_sel {
+		function = "emmc";
+		groups = "emmc_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
 };
 
 &qspi {
@@ -173,3 +178,81 @@
 		};
 	};
 };
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+/*
+ * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
+ * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
+ * bus-width property here and disable the nand node with status = "disabled";.
+ *
+ * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
+ */
+&sdio {
+	bus-width = <4>;
+	no-1-8-v;
+	status = "ok";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 104afe98a43b..16666324fda8 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -65,6 +65,14 @@
 	status = "okay";
 };
 
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -120,6 +128,40 @@
 	};
 };
 
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
 &sata_phy0 {
 	status = "okay";
 };