hwmon: (pmbus/ltc2978) add support for lt717x

Add support for LT7170 and LT7171. The LT7170 and LT7171 are 20 A, 16 V,
Single- or Dual-Phase, Silent Switcher Step-Down Regulators with Digital
Power System Management.

The relevant registers in the LT7170 and LT7171 are similar to those in
the LTC3887, but with fewer channels. This adds the chip ID and
identification of ASCII to differentiate between the LT7170 and LT7171.
These devices support polling for status updates and clearing peak
values. The data format for voltage, current, and temperature is set to
IEEE754 for precision and compatibility.

Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-3-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

2 files changed, 44 insertions, 6 deletions

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 675b0d4703d8..6ce68dd33369 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -233,9 +233,9 @@ config SENSORS_LTC2978_REGULATOR
 	depends on SENSORS_LTC2978 && REGULATOR
 	help
 	  If you say yes here you get regulator support for Linear Technology
-	  LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7841,
-	  LTC7880, LTM4644, LTM4673, LTM4675, LTM4676, LTM4677, LTM4678,
-	  LTM4680, LTM4686, and LTM4700.
+	  LT7170, LT7171, LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889,
+	  LTC7841, LTC7880, LTM4644, LTM4673, LTM4675, LTM4676, LTM4677,
+	  LTM4678, LTM4680, LTM4686, and LTM4700.
 
 config SENSORS_LTC3815
 	tristate "Linear Technologies LTC3815"
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index 658cb1173291..8f5be520a15d 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -23,8 +23,8 @@ enum chips {
 	/* Managers */
 	ltc2972, ltc2974, ltc2975, ltc2977, ltc2978, ltc2979, ltc2980,
 	/* Controllers */
-	ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7132,
-	ltc7841, ltc7880,
+	lt7170, lt7171, ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887,
+	ltc3889, ltc7132, ltc7841, ltc7880,
 	/* Modules */
 	ltm2987, ltm4664, ltm4673, ltm4675, ltm4676, ltm4677, ltm4678, ltm4680,
 	ltm4686, ltm4700,
@@ -62,6 +62,7 @@ enum chips {
 
 #define LTC2978_ID_MASK			0xfff0
 
+#define LT7170_ID			0x1C10
 #define LTC2972_ID			0x0310
 #define LTC2974_ID			0x0210
 #define LTC2975_ID			0x0220
@@ -537,6 +538,8 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
 }
 
 static const struct i2c_device_id ltc2978_id[] = {
+	{"lt7170", lt7170},
+	{"lt7171", lt7171},
 	{"ltc2972", ltc2972},
 	{"ltc2974", ltc2974},
 	{"ltc2975", ltc2975},
@@ -615,7 +618,7 @@ static int ltc2978_get_id(struct i2c_client *client)
 		ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
 		if (ret < 0)
 			return ret;
-		if (ret < 3 || strncmp(buf, "LTC", 3))
+		if (ret < 3 || (strncmp(buf, "LTC", 3) && strncmp(buf, "ADI", 3)))
 			return -ENODEV;
 
 		ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
@@ -630,6 +633,25 @@ static int ltc2978_get_id(struct i2c_client *client)
 
 	chip_id &= LTC2978_ID_MASK;
 
+	if (chip_id == LT7170_ID) {
+		u8 buf[I2C_SMBUS_BLOCK_MAX];
+		int ret;
+
+		ret = i2c_smbus_read_i2c_block_data(client, PMBUS_IC_DEVICE_ID,
+						    sizeof(buf), buf);
+		if (ret < 0)
+			return ret;
+
+		if (!strncmp(buf + 1, "LT7170", 6) ||
+		    !strncmp(buf + 1, "LT7170-1", 8))
+			return lt7170;
+		if (!strncmp(buf + 1, "LT7171", 6) ||
+		    !strncmp(buf + 1, "LT7171-1", 8))
+			return lt7171;
+
+		return -ENODEV;
+	}
+
 	if (chip_id == LTC2972_ID)
 		return ltc2972;
 	else if (chip_id == LTC2974_ID)
@@ -741,6 +763,20 @@ static int ltc2978_probe(struct i2c_client *client)
 	data->temp2_max = 0x7c00;
 
 	switch (data->id) {
+	case lt7170:
+	case lt7171:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+		info->read_word_data = ltc3883_read_word_data;
+		info->pages = LTC3883_NUM_PAGES;
+		info->format[PSC_VOLTAGE_IN] = ieee754;
+		info->format[PSC_VOLTAGE_OUT] = ieee754;
+		info->format[PSC_CURRENT_OUT] = ieee754;
+		info->format[PSC_TEMPERATURE] = ieee754;
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+		break;
 	case ltc2972:
 		info->read_word_data = ltc2975_read_word_data;
 		info->pages = LTC2972_NUM_PAGES;
@@ -927,6 +963,8 @@ static int ltc2978_probe(struct i2c_client *client)
 
 #ifdef CONFIG_OF
 static const struct of_device_id ltc2978_of_match[] = {
+	{ .compatible = "lltc,lt7170" },
+	{ .compatible = "lltc,lt7171" },
 	{ .compatible = "lltc,ltc2972" },
 	{ .compatible = "lltc,ltc2974" },
 	{ .compatible = "lltc,ltc2975" },