Merge tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add hybrid processors support to the intel_pstate driver and
  make it work with more processor models when HWP is disabled, make the
  intel_idle driver use special C6 idle state paremeters when package
  C-states are disabled, add cooling support to the tegra30 devfreq
  driver, rework the TEO (timer events oriented) cpuidle governor,
  extend the OPP (operating performance points) framework to use the
  required-opps DT property in more cases, fix some issues and clean up
  a number of assorted pieces of code.

  Specifics:

   - Make intel_pstate support hybrid processors using abstract
     performance units in the HWP interface (Rafael Wysocki).

   - Add Icelake servers and Cometlake support in no-HWP mode to
     intel_pstate (Giovanni Gherdovich).

   - Make cpufreq_online() error path be consistent with the CPU device
     removal path in cpufreq (Rafael Wysocki).

   - Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
     Randy Dunlap, Shaokun Zhang).

   - Make intel_idle use special idle state parameters for C6 when
     package C-states are disabled (Chen Yu).

   - Rework the TEO (timer events oriented) cpuidle governor to address
     some theoretical shortcomings in it (Rafael Wysocki).

   - Drop unneeded semicolon from the TEO governor (Wan Jiabing).

   - Modify the runtime PM framework to accept unassigned suspend and
     resume callback pointers (Ulf Hansson).

   - Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).

   - Improve device performance states support in the generic power
     domains (genpd) framework (Ulf Hansson).

   - Fix some documentation issues in genpd (Yang Yingliang).

   - Make the operating performance points (OPP) framework use the
     required-opps DT property in use cases that are not related to
     genpd (Hsin-Yi Wang).

   - Make lazy_link_required_opp_table() use list_del_init instead of
     list_del/INIT_LIST_HEAD (Yang Yingliang).

   - Simplify wake IRQs handling in the core system-wide sleep support
     code and clean up some coding style inconsistencies in it (Tian
     Tao, Zhen Lei).

   - Add cooling support to the tegra30 devfreq driver and improve its
     DT bindings (Dmitry Osipenko).

   - Fix some assorted issues in the devfreq core and drivers (Chanwoo
     Choi, Dong Aisheng, YueHaibing)"

* tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  PM / devfreq: passive: Fix get_target_freq when not using required-opp
  cpufreq: Make cpufreq_online() call driver->offline() on errors
  opp: Allow required-opps to be used for non genpd use cases
  cpuidle: teo: remove unneeded semicolon in teo_select()
  dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
  dt-bindings: devfreq: tegra30-actmon: Convert to schema
  PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
  PM: runtime: Clarify documentation when callbacks are unassigned
  PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
  PM: runtime: Improve path in rpm_idle() when no callback
  PM: hibernate: remove leading spaces before tabs
  PM: sleep: remove trailing spaces and tabs
  PM: domains: Drop/restore performance state votes for devices at runtime PM
  PM: domains: Return early if perf state is already set for the device
  PM: domains: Split code in dev_pm_genpd_set_performance_state()
  cpuidle: teo: Use kerneldoc documentation in admin-guide
  cpuidle: teo: Rework most recent idle duration values treatment
  cpuidle: teo: Change the main idle state selection logic
  cpuidle: teo: Cosmetic modification of teo_select()
  cpuidle: teo: Cosmetic modifications of teo_update()
  ...

2 files changed, 126 insertions, 57 deletions

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
deleted file mode 100644
index 897eedfa2bc8..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-NVIDIA Tegra Activity Monitor
-
-The activity monitor block collects statistics about the behaviour of other
-components in the system. This information can be used to derive the rate at
-which the external memory needs to be clocked in order to serve all requests
-from the monitored clients.
-
-Required properties:
-- compatible: should be "nvidia,tegra<chip>-actmon"
-- reg: offset and length of the register set for the device
-- interrupts: standard interrupt property
-- clocks: Must contain a phandle and clock specifier pair for each entry in
-clock-names. See ../../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - actmon
-  - emc
-- resets: Must contain an entry for each entry in reset-names. See
-../../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - actmon
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
-- interconnects: Should contain entries for memory clients sitting on
-                 MC->EMC memory interconnect path.
-- interconnect-names: Should include name of the interconnect path for each
-                      interconnect entry. Consult TRM documentation for
-                      information about available memory clients, see MEMORY
-                      CONTROLLER section.
-
-For each opp entry in 'operating-points-v2' table:
-- opp-supported-hw: bitfield indicating SoC speedo ID mask
-- opp-peak-kBps: peak bandwidth of the memory channel
-
-Example:
-	dfs_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp@12750000 {
-			opp-hz = /bits/ 64 <12750000>;
-			opp-supported-hw = <0x000F>;
-			opp-peak-kBps = <51000>;
-		};
-		...
-	};
-
-	actmon@6000c800 {
-		compatible = "nvidia,tegra124-actmon";
-		reg = <0x0 0x6000c800 0x0 0x400>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
-			 <&tegra_car TEGRA124_CLK_EMC>;
-		clock-names = "actmon", "emc";
-		resets = <&tegra_car 119>;
-		reset-names = "actmon";
-		operating-points-v2 = <&dfs_opp_table>;
-		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
-		interconnect-names = "cpu";
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
new file mode 100644
index 000000000000..e3379d106728
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Activity Monitor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The activity monitor block collects statistics about the behaviour of other
+  components in the system. This information can be used to derive the rate at
+  which the external memory needs to be clocked in order to serve all requests
+  from the monitored clients.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra30-actmon
+      - nvidia,tegra114-actmon
+      - nvidia,tegra124-actmon
+      - nvidia,tegra210-actmon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: actmon
+      - const: emc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: actmon
+
+  interrupts:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 12
+
+  interconnect-names:
+    minItems: 1
+    maxItems: 12
+    description:
+      Should include name of the interconnect path for each interconnect
+      entry. Consult TRM documentation for information about available
+      memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
+  "#cooling-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - interrupts
+  - interconnects
+  - interconnect-names
+  - operating-points-v2
+  - "#cooling-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra30-mc.h>
+
+    mc: memory-controller@7000f000 {
+        compatible = "nvidia,tegra30-mc";
+        reg = <0x7000f000 0x400>;
+        clocks = <&clk 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
+
+    emc: external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra30-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+    };
+
+    actmon@6000c800 {
+        compatible = "nvidia,tegra30-actmon";
+        reg = <0x6000c800 0x400>;
+        interrupts = <0 45 4>;
+        clocks = <&clk 119>, <&clk 57>;
+        clock-names = "actmon", "emc";
+        resets = <&rst 119>;
+        reset-names = "actmon";
+        operating-points-v2 = <&dvfs_opp_table>;
+        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
+        interconnect-names = "cpu-read";
+        #cooling-cells = <2>;
+    };