summaryrefslogtreecommitdiff
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorAleksa Savic <savicaleksa83@gmail.com>2023-10-16 10:35:58 +0200
committerGuenter Roeck <linux@roeck-us.net>2023-10-29 22:22:48 -0700
commitceaa22402e44e09ab34840a3a83888f93785c772 (patch)
treed7e46d55248bbc4d0c10d7a7c425847483290d2e /Documentation/hwmon
parente56a5e3dfd149573e6134b7eb373d56bc81bd0de (diff)
hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer High Flow USB flow sensor, which communicates through a proprietary USB HID protocol. This commit also adds support for the sensors of the MPS Flow devices, as they have the same USB product ID and sensor layouts. Implemented by Leonard Anderweit [1]. Internal and external temp sensor readings are available, along with the flow sensor. Additionally, serial number and firmware version are exposed through debugfs. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/90 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20231016083559.139341-3-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/aquacomputer_d5next.rst7
1 files changed, 7 insertions, 0 deletions
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index 94dc2d93d180..cb073c79479c 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -16,6 +16,8 @@ Supported devices:
* Aquacomputer Aquastream XT watercooling pump
* Aquacomputer Aquastream Ultimate watercooling pump
* Aquacomputer Poweradjust 3 fan controller
+* Aquacomputer High Flow USB flow meter
+* Aquacomputer MPS Flow devices
Author: Aleksa Savic
@@ -73,6 +75,11 @@ It also exposes pressure and flow speed readings.
The Poweradjust 3 controller exposes a single external temperature sensor.
+The High Flow USB exposes an internal and external temperature sensor, and a flow meter.
+
+The MPS Flow devices expose the same entries as the High Flow USB because they have
+the same USB product ID and report sensors equivalently.
+
Depending on the device, not all sysfs and debugfs entries will be available.
Writing to virtual temperature sensors is not currently supported.