diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-26 11:47:26 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-26 11:47:26 -0800 |
| commit | 4b8c673b761e74add4fd185d806ac16c9b40158f (patch) | |
| tree | b7589b0844fc3306e8886228d4290eaff26456c6 /Documentation | |
| parent | d4563201f33a022fc0353033d9dfeb1606a88330 (diff) | |
| parent | 3e62aba8284de0994a669d07983299242e68fe72 (diff) | |
Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye,
stkwebcam, tm6000, vpfe_capture and zr364xx
- saa7146 recovered from staging/deprecated. We opted to give ti a
chance, and, instead of deprecating it, the intention is to write
patches migrating it from VB1 to VB2.
- av7110 returned from staging/deprecated/ to staging/ as we're not
planning on dropping it any time soon
- media controller API has gained experimental support for G_ROUTING
and streams API. No drivers use it right now. We're planning to add
one after -rc1, giving some time to experience the API and eventually
have changes during the next development cycle
- New sensor drivers: imx296, imx415, ov8858
- Atomisp had lots of changes, specially on its sensor's interface,
making atomisp sensor drivers closer to normal sensor drivers
- media controller kAPI has gained some helpers to traverse pipelines
- uvcvideo now better support power line control
- lots of bug fixes, cleanups and driver improvements
* tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits)
media: imx-mipi-csis: Check csis_fmt validity before use
media: v4l2-subdev.c: clear stream field
media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci"
media: Revert "media: av7110: move to staging/media/deprecated/saa7146"
media: imx-pxp: convert to regmap
media: imx-pxp: Use non-threaded IRQ
media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers
media: imx-pxp: Implement frame size enumeration
media: imx-pxp: Pass pixel format value to find_format()
media: imx-pxp: Add media controller support
media: imx-pxp: Don't set bus_info manually in .querycap()
media: imx-pxp: Sort headers alphabetically
media: imx-pxp: add support for i.MX7D
media: imx-pxp: make data_path_ctrl0 platform dependent
media: imx-pxp: disable LUT block
media: imx-pxp: explicitly disable unused blocks
media: imx-pxp: extract helper function to setup data path
media: imx-pxp: detect PXP version
media: dt-bindings: media: fsl-pxp: convert to yaml
...
Diffstat (limited to 'Documentation')
53 files changed, 1457 insertions, 774 deletions
diff --git a/Documentation/admin-guide/media/cec.rst b/Documentation/admin-guide/media/cec.rst index 5c7259371494..14ec3ff317c2 100644 --- a/Documentation/admin-guide/media/cec.rst +++ b/Documentation/admin-guide/media/cec.rst @@ -340,14 +340,14 @@ and IO24. Monitoring the HPD an 5V lines is not necessary, but it is helpful. This kernel patch will hook up the cec-gpio driver correctly to e.g. ``arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts``:: - cec-gpio@7 { + cec@7 { compatible = "cec-gpio"; cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; }; - cec-gpio@8 { + cec@8 { compatible = "cec-gpio"; cec-gpios = <&gpio 8 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; hpd-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/admin-guide/media/cpia2.rst b/Documentation/admin-guide/media/cpia2.rst deleted file mode 100644 index f6ffef686462..000000000000 --- a/Documentation/admin-guide/media/cpia2.rst +++ /dev/null @@ -1,145 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The cpia2 driver -================ - -Authors: Peter Pregler <Peter_Pregler@email.com>, -Scott J. Bertin <scottbertin@yahoo.com>, and -Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which -this one was modelled from. - -Introduction ------------- - -This is a driver for STMicroelectronics's CPiA2 (second generation -Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG -stream at up to vga size. It implements the Video4Linux interface as much as -possible. Since the V4L interface does not support compressed formats, only -an mjpeg enabled application can be used with the camera. We have modified the -gqcam application to view this stream. - -The driver is implemented as two kernel modules. The cpia2 module -contains the camera functions and the V4L interface. The cpia2_usb module -contains usb specific functions. The main reason for this was the size of the -module was getting out of hand, so I separated them. It is not likely that -there will be a parallel port version. - -Features --------- - -- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos - sensors. I only have the vga sensor, so can't test the other. -- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between. - VGA and QVGA are the native image sizes for the VGA camera. CIF is done - in the coprocessor by scaling QVGA. All other sizes are done by clipping. -- Palette: YCrCb, compressed with MJPEG. -- Some compression parameters are settable. -- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA). -- Adjust brightness, color, contrast while streaming. -- Flicker control settable for 50 or 60 Hz mains frequency. - -Making and installing the stv672 driver modules ------------------------------------------------ - -Requirements -~~~~~~~~~~~~ - -Video4Linux must be either compiled into the kernel or -available as a module. Video4Linux2 is automatically detected and made -available at compile time. - -Setup -~~~~~ - -Use ``modprobe cpia2`` to load and ``modprobe -r cpia2`` to unload. This -may be done automatically by your distribution. - -Driver options -~~~~~~~~~~~~~~ - -.. tabularcolumns:: |p{13ex}|L| - - -============== ======================================================== -Option Description -============== ======================================================== -video_nr video device to register (0=/dev/video0, etc) - range -1 to 64. default is -1 (first available) - If you have more than 1 camera, this MUST be -1. -buffer_size Size for each frame buffer in bytes (default 68k) -num_buffers Number of frame buffers (1-32, default 3) -alternate USB Alternate (2-7, default 7) -flicker_freq Frequency for flicker reduction(50 or 60, default 60) -flicker_mode 0 to disable, or 1 to enable flicker reduction. - (default 0). This is only effective if the camera - uses a stv0672 coprocessor. -============== ======================================================== - -Setting the options -~~~~~~~~~~~~~~~~~~~ - -If you are using modules, edit /etc/modules.conf and add an options -line like this:: - - options cpia2 num_buffers=3 buffer_size=65535 - -If the driver is compiled into the kernel, at boot time specify them -like this:: - - cpia2.num_buffers=3 cpia2.buffer_size=65535 - -What buffer size should I use? -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The maximum image size depends on the alternate you choose, and the -frame rate achieved by the camera. If the compression engine is able to -keep up with the frame rate, the maximum image size is given by the table -below. - -The compression engine starts out at maximum compression, and will -increase image quality until it is close to the size in the table. As long -as the compression engine can keep up with the frame rate, after a short time -the images will all be about the size in the table, regardless of resolution. - -At low alternate settings, the compression engine may not be able to -compress the image enough and will reduce the frame rate by producing larger -images. - -The default of 68k should be good for most users. This will handle -any alternate at frame rates down to 15fps. For lower frame rates, it may -be necessary to increase the buffer size to avoid having frames dropped due -to insufficient space. - -========== ========== ======== ===== -Alternate bytes/ms 15fps 30fps -========== ========== ======== ===== - 2 128 8533 4267 - 3 384 25600 12800 - 4 640 42667 21333 - 5 768 51200 25600 - 6 896 59733 29867 - 7 1023 68200 34100 -========== ========== ======== ===== - -Table: Image size(bytes) - - -How many buffers should I use? -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -For normal streaming, 3 should give the best results. With only 2, -it is possible for the camera to finish sending one image just after a -program has started reading the other. If this happens, the driver must drop -a frame. The exception to this is if you have a heavily loaded machine. In -this case use 2 buffers. You are probably not reading at the full frame rate. -If the camera can send multiple images before a read finishes, it could -overwrite the third buffer before the read finishes, leading to a corrupt -image. Single and double buffering have extra checks to avoid overwriting. - -Using the camera -~~~~~~~~~~~~~~~~ - -We are providing a modified gqcam application to view the output. In -order to avoid confusion, here it is called mview. There is also the qx5view -program which can also control the lights on the qx5 microscope. MJPEG Tools -(http://mjpeg.sourceforge.net) can also be used to record from the camera. diff --git a/Documentation/admin-guide/media/dvb-drivers.rst b/Documentation/admin-guide/media/dvb-drivers.rst index 8df637c375f9..66fa4edd0606 100644 --- a/Documentation/admin-guide/media/dvb-drivers.rst +++ b/Documentation/admin-guide/media/dvb-drivers.rst @@ -13,4 +13,3 @@ Digital TV driver-specific documentation opera-firmware technisat ttusb-dec - zr364xx diff --git a/Documentation/admin-guide/media/meye.rst b/Documentation/admin-guide/media/meye.rst deleted file mode 100644 index 9098a1e65f8b..000000000000 --- a/Documentation/admin-guide/media/meye.rst +++ /dev/null @@ -1,93 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -.. include:: <isonum.txt> - -Vaio Picturebook Motion Eye Camera Driver -========================================= - -Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net> - -Copyright |copy| 2001-2002 Alcôve <www.alcove.com> - -Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org> - -This driver enable the use of video4linux compatible applications with the -Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which -can be found in the "Misc devices" section of the kernel configuration utility) -to be compiled and installed (using its "camera=1" parameter). - -It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480. - -Grabbing is supported in packed YUV colorspace only. - -MJPEG hardware grabbing is supported via a private API (see below). - -Hardware supported ------------------- - -This driver supports the 'second' version of the MotionEye camera :) - -The first version was connected directly on the video bus of the Neomagic -video card and is unsupported. - -The second one, made by Kawasaki Steel is fully supported by this -driver (PCI vendor/device is 0x136b/0xff01) - -The third one, present in recent (more or less last year) Picturebooks -(C1M* models), is not supported. The manufacturer has given the specs -to the developers under a NDA (which allows the development of a GPL -driver however), but things are not moving very fast (see -http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011). - -There is a forth model connected on the USB bus in TR1* Vaio laptops. -This camera is not supported at all by the current driver, in fact -little information if any is available for this camera -(USB vendor/device is 0x054c/0x0107). - -Driver options --------------- - -Several options can be passed to the meye driver using the standard -module argument syntax (<param>=<value> when passing the option to the -module or meye.<param>=<value> on the kernel boot line when meye is -statically linked into the kernel). Those options are: - -.. code-block:: none - - gbuffers: number of capture buffers, default is 2 (32 max) - - gbufsize: size of each capture buffer, default is 614400 - - video_nr: video device to register (0 = /dev/video0, etc) - -Module use ----------- - -In order to automatically load the meye module on use, you can put those lines -in your /etc/modprobe.d/meye.conf file: - -.. code-block:: none - - alias char-major-81 videodev - alias char-major-81-0 meye - options meye gbuffers=32 - -Usage: ------- - -.. code-block:: none - - xawtv >= 3.49 (<http://bytesex.org/xawtv/>) - for display and uncompressed video capture: - - xawtv -c /dev/video0 -geometry 640x480 - or - xawtv -c /dev/video0 -geometry 320x240 - - motioneye (<http://popies.net/meye/>) - for getting ppm or jpg snapshots, mjpeg video - -Bugs / Todo ------------ - -- 'motioneye' still uses the meye private v4l1 API extensions. diff --git a/Documentation/admin-guide/media/other-usb-cardlist.rst b/Documentation/admin-guide/media/other-usb-cardlist.rst index bbfdb1389c18..fb88db50e861 100644 --- a/Documentation/admin-guide/media/other-usb-cardlist.rst +++ b/Documentation/admin-guide/media/other-usb-cardlist.rst @@ -14,8 +14,6 @@ dvb-as102 nBox DVB-T Dongle 0b89:0007 dvb-as102 Sky IT Digital Key (green led) 2137:0001 b2c2-flexcop-usb Technisat/B2C2 FlexCop II/IIb/III 0af7:0101 Digital TV -cpia2 Vision's CPiA2 cameras 0553:0100, 0553:0140, - such as the Digital Blue QX5 0553:0151 go7007 WIS GO7007 MPEG encoder 1943:a250, 093b:a002, 093b:a004, 0eb1:6666, 0eb1:6668 @@ -66,7 +64,6 @@ pwc Visionite VCS-UC300 0d81:1900 pwc Visionite VCS-UM100 0d81:1910 s2255drv Sensoray 2255 1943:2255, 1943:2257 stk1160 STK1160 USB video capture dongle 05e1:0408 -stkwebcam Syntek DC1125 174f:a311, 05e1:0501 dvb-ttusb-budget Technotrend/Hauppauge Nova-USB devices 0b48:1003, 0b48:1004, 0b48:1005 dvb-ttusb_dec Technotrend/Hauppauge MPEG decoder 0b48:1006 @@ -78,15 +75,4 @@ dvb-ttusb_dec Technotrend/Hauppauge MPEG decoder DEC2540-t 0b48:1009 usbtv Fushicai USBTV007 Audio-Video Grabber 1b71:3002, 1f71:3301, 1f71:3306 -zr364xx USB ZR364XX Camera 08ca:0109, 041e:4024, - 0d64:0108, 0546:3187, - 0d64:3108, 0595:4343, - 0bb0:500d, 0feb:2004, - 055f:b500, 08ca:2062, - 052b:1a18, 04c8:0729, - 04f2:a208, 0784:0040, - 06d6:0034, 0a17:0062, - 06d6:003b, 0a17:004e, - 041e:405d, 08ca:2102, - 06d6:003d ================ ====================================== ===================== diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst index f4d670e632f8..42528795d4da 100644 --- a/Documentation/admin-guide/media/pci-cardlist.rst +++ b/Documentation/admin-guide/media/pci-cardlist.rst @@ -77,7 +77,6 @@ ipu3-cio2 Intel ipu3-cio2 driver ivtv Conexant cx23416/cx23415 MPEG encoder/decoder ivtvfb Conexant cx23415 framebuffer mantis MANTIS based cards -meye Sony Vaio Picturebook Motion Eye mxb Siemens-Nixdorf 'Multimedia eXtension Board' netup-unidvb NetUP Universal DVB card ngene Micronas nGene diff --git a/Documentation/admin-guide/media/platform-cardlist.rst b/Documentation/admin-guide/media/platform-cardlist.rst index 8ef57cd13dec..1230ae4037ad 100644 --- a/Documentation/admin-guide/media/platform-cardlist.rst +++ b/Documentation/admin-guide/media/platform-cardlist.rst @@ -30,7 +30,6 @@ exynos-fimc-is EXYNOS4x12 FIMC-IS (Imaging Subsystem) exynos-fimc-lite EXYNOS FIMC-LITE camera interface exynos-gsc Samsung Exynos G-Scaler exy Samsung S5P/EXYNOS4 SoC series Camera Subsystem -fsl-viu Freescale VIU imx-pxp i.MX Pixel Pipeline (PXP) isdf TI DM365 ISIF video capture mmp_camera Marvell Armada 610 integrated camera controller diff --git a/Documentation/admin-guide/media/tm6000-cardlist.rst b/Documentation/admin-guide/media/tm6000-cardlist.rst deleted file mode 100644 index 6d2769c0f4d8..000000000000 --- a/Documentation/admin-guide/media/tm6000-cardlist.rst +++ /dev/null @@ -1,83 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -TM6000 cards list -================= - -.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}| - -.. flat-table:: - :header-rows: 1 - :widths: 2 19 18 - :stub-columns: 0 - - * - Card number - - Card name - - USB IDs - - * - 0 - - Unknown tm6000 video grabber - - - - * - 1 - - Generic tm5600 board - - 6000:0001 - - * - 2 - - Generic tm6000 board - - - - * - 3 - - Generic tm6010 board - - 6000:0002 - - * - 4 - - 10Moons UT 821 - - - - * - 5 - - 10Moons UT 330 - - - - * - 6 - - ADSTECH Dual TV USB - - 06e1:f332 - - * - 7 - - Freecom Hybrid Stick / Moka DVB-T Receiver Dual - - 14aa:0620 - - * - 8 - - ADSTECH Mini Dual TV USB - - 06e1:b339 - - * - 9 - - Hauppauge WinTV HVR-900H / WinTV USB2-Stick - - 2040:6600, 2040:6601, 2040:6610, 2040:6611 - - * - 10 - - Beholder Wander DVB-T/TV/FM USB2.0 - - 6000:dec0 - - * - 11 - - Beholder Voyager TV/FM USB2.0 - - 6000:dec1 - - * - 12 - - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick - - 0ccd:0086, 0ccd:00A5 - - * - 13 - - Twinhan TU501(704D1) - - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264 - - * - 14 - - Beholder Wander Lite DVB-T/TV/FM USB2.0 - - 6000:dec2 - - * - 15 - - Beholder Voyager Lite TV/FM USB2.0 - - 6000:dec3 - - * - 16 - - Terratec Grabster AV 150/250 MX - - 0ccd:0079 diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst index 1e96f928e0af..5f5ab0723e48 100644 --- a/Documentation/admin-guide/media/usb-cardlist.rst +++ b/Documentation/admin-guide/media/usb-cardlist.rst @@ -43,7 +43,6 @@ Driver Name airspy AirSpy au0828 Auvitek AU0828 b2c2-flexcop-usb Technisat/B2C2 Air/Sky/Cable2PC USB -cpia2 CPiA2 Video For Linux cx231xx Conexant cx231xx USB video capture dvb-as102 Abilis AS102 DVB receiver dvb-ttusb-budget Technotrend/Hauppauge Nova - USB devices @@ -93,15 +92,10 @@ pwc USB Philips Cameras s2250 Sensoray 2250/2251 s2255drv USB Sensoray 2255 video capture device smsusb Siano SMS1xxx based MDTV receiver -stkwebcam USB Syntek DC1125 Camera -tm6000-alsa TV Master TM5600/6000/6010 audio -tm6000-dvb DVB Support for tm6000 based TV cards -tm6000 TV Master TM5600/6000/6010 driver ttusb_dec Technotrend/Hauppauge USB DEC devices usbtv USBTV007 video capture uvcvideo USB Video Class (UVC) zd1301 ZyDAS ZD1301 -zr364xx USB ZR364XX Camera ====================== ========================================================= .. toctree:: @@ -110,7 +104,6 @@ zr364xx USB ZR364XX Camera au0828-cardlist cx231xx-cardlist em28xx-cardlist - tm6000-cardlist siano-cardlist gspca-cardlist diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index 734e18c310bd..1c41f87c3917 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -11,14 +11,12 @@ Video4Linux (V4L) driver-specific documentation bttv cafe_ccic - cpia2 cx88 fimc imx imx7 ipu3 ivtv - meye omap3isp omap4_camera philips diff --git a/Documentation/admin-guide/media/zr364xx.rst b/Documentation/admin-guide/media/zr364xx.rst deleted file mode 100644 index 7291e54b8be3..000000000000 --- a/Documentation/admin-guide/media/zr364xx.rst +++ /dev/null @@ -1,102 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -Zoran 364xx based USB webcam module -=================================== - -site: http://royale.zerezo.com/zr364xx/ - -mail: royale@zerezo.com - - -Introduction ------------- - - -This brings support under Linux for the Aiptek PocketDV 3300 and similar -devices in webcam mode. If you just want to get on your PC the pictures -and movies on the camera, you should use the usb-storage module instead. - -The driver works with several other cameras in webcam mode (see the list -below). - -Possible chipsets are : ZR36430 (ZR36430BGC) and -maybe ZR36431, ZR36440, ZR36442... - -You can try the experience changing the vendor/product ID values (look -at the source code). - -You can get these values by looking at /var/log/messages when you plug -your camera, or by typing : cat /sys/kernel/debug/usb/devices. - - -Install -------- - -In order to use this driver, you must compile it with your kernel, -with the following config options:: - - ./scripts/config -e USB - ./scripts/config -m MEDIA_SUPPORT - ./scripts/config -e MEDIA_USB_SUPPORT - ./scripts/config -e MEDIA_CAMERA_SUPPORT - ./scripts/config -m USB_ZR364XX - -Usage ------ - -modprobe zr364xx debug=X mode=Y - -- debug : set to 1 to enable verbose debug messages -- mode : 0 = 320x240, 1 = 160x120, 2 = 640x480 - -You can then use the camera with V4L2 compatible applications, for -example Ekiga. - -To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M -count=1 - -links ------ - -http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV) -http://www.harmwal.nl/pccam880/ (this project also supports cameras based on this chipset) - -Supported devices ------------------ - -====== ======= ============== ==================== -Vendor Product Distributor Model -====== ======= ============== ==================== -0x08ca 0x0109 Aiptek PocketDV 3300 -0x08ca 0x0109 Maxell Maxcam PRO DV3 -0x041e 0x4024 Creative PC-CAM 880 -0x0d64 0x0108 Aiptek Fidelity 3200 -0x0d64 0x0108 Praktica DCZ 1.3 S -0x0d64 0x0108 Genius Digital Camera (?) -0x0d64 0x0108 DXG Technology Fashion Cam -0x0546 0x3187 Polaroid iON 230 -0x0d64 0x3108 Praktica Exakta DC 2200 -0x0d64 0x3108 Genius G-Shot D211 -0x0595 0x4343 Concord Eye-Q Duo 1300 -0x0595 0x4343 Concord Eye-Q Duo 2000 -0x0595 0x4343 Fujifilm EX-10 -0x0595 0x4343 Ricoh RDC-6000 -0x0595 0x4343 Digitrex DSC 1300 -0x0595 0x4343 Firstline FDC 2000 -0x0bb0 0x500d Concord EyeQ Go Wireless -0x0feb 0x2004 CRS Electronic 3.3 Digital Camera -0x0feb 0x2004 Packard Bell DSC-300 -0x055f 0xb500 Mustek MDC 3000 -0x08ca 0x2062 Aiptek PocketDV 5700 -0x052b 0x1a18 Chiphead Megapix V12 -0x04c8 0x0729 Konica Revio 2 -0x04f2 0xa208 Creative PC-CAM 850 -0x0784 0x0040 Traveler Slimline X5 -0x06d6 0x0034 Trust Powerc@m 750 -0x0a17 0x0062 Pentax Optio 50L -0x06d6 0x003b Trust Powerc@m 970Z -0x0a17 0x004e Pentax Optio 50 -0x041e 0x405d Creative DiVi CAM 516 -0x08ca 0x2102 Aiptek DV T300 -0x06d6 0x003d Trust Powerc@m 910Z -====== ======= ============== ==================== diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt deleted file mode 100644 index 47e8d73d32a3..000000000000 --- a/Documentation/devicetree/bindings/media/cec-gpio.txt +++ /dev/null @@ -1,42 +0,0 @@ -* HDMI CEC GPIO driver - -The HDMI CEC GPIO module supports CEC implementations where the CEC line -is hooked up to a pull-up GPIO line and - optionally - the HPD line is -hooked up to another GPIO line. - -Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and -5V lines it is 5.3V. So you may need some sort of level conversion circuitry -when connecting them to a GPIO line. - -Required properties: - - compatible: value must be "cec-gpio". - - cec-gpios: gpio that the CEC line is connected to. The line should be - tagged as open drain. - -If the CEC line is associated with an HDMI receiver/transmitter, then the -following property is also required: - - - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. - -If the CEC line is not associated with an HDMI receiver/transmitter, then -the following property is optional and can be used for debugging HPD changes: - - - hpd-gpios: gpio that the HPD line is connected to. - -This property is optional and can be used for debugging changes on the 5V line: - - - v5-gpios: gpio that the 5V line is connected to. - -Example for the Raspberry Pi 3 where the CEC line is connected to -pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is -connected to pin 11 aka BCM17 and the 5V line is connected to pin -15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!): - -#include <dt-bindings/gpio/gpio.h> - -cec-gpio { - compatible = "cec-gpio"; - cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt deleted file mode 100644 index 22d7aae3d3d7..000000000000 --- a/Documentation/devicetree/bindings/media/cec.txt +++ /dev/null @@ -1,8 +0,0 @@ -Common bindings for HDMI CEC adapters - -- hdmi-phandle: phandle to the HDMI controller. - -- needs-hpd: if present the CEC support is only available when the HPD - is high. Some boards only let the CEC pin through if the HPD is high, - for example if there is a level converter that uses the HPD to power - up or down. diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml index 8d844f4312d1..b1fab53418f9 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson AO-CEC Controller @@ -33,11 +33,8 @@ properties: interrupts: maxItems: 1 - hdmi-phandle: - description: phandle to the HDMI controller - $ref: /schemas/types.yaml#/definitions/phandle - allOf: + - $ref: cec-common.yaml# - if: properties: compatible: @@ -81,7 +78,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml new file mode 100644 index 000000000000..af6ee5f1c73f --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/cec-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDMI CEC Adapters Common Properties + +maintainers: + - Hans Verkuil <hverkuil@xs4all.nl> + +properties: + $nodename: + pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$" + + hdmi-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the HDMI controller. + + needs-hpd: + type: boolean + description: + The CEC support is only available when the HPD is high. Some boards only + let the CEC pin through if the HPD is high, for example if there is a + level converter that uses the HPD to power up or down. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml new file mode 100644 index 000000000000..64d7ec057672 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDMI CEC GPIO + +maintainers: + - Hans Verkuil <hverkuil-cisco@xs4all.nl> + +description: | + The HDMI CEC GPIO module supports CEC implementations where the CEC line is + hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up + to another GPIO line. + + Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and + 5V lines it is 5.3V. So you may need some sort of level conversion + circuitry when connecting them to a GPIO line. + +properties: + compatible: + const: cec-gpio + + cec-gpios: + maxItems: 1 + description: + GPIO that the CEC line is connected to. The line should be tagged as open + drain. + + hpd-gpios: + maxItems: 1 + description: + GPIO that the HPD line is connected to. Used for debugging HPD changes + when the CEC line is not associated with an HDMI receiver/transmitter. + + v5-gpios: + maxItems: 1 + description: + GPIO that the 5V line is connected to. Used for debugging changes on the + 5V line. + +required: + - compatible + - cec-gpios + +allOf: + - $ref: cec-common.yaml# + - if: + required: + - hdmi-phandle + then: + properties: + hpd-gpios: false + + - if: + required: + - hpd-gpios + then: + properties: + hdmi-phandle: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + cec { + compatible = "cec-gpio"; + cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml new file mode 100644 index 000000000000..369c48fd9bf9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/nvidia,tegra114-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra HDMI CEC + +maintainers: + - Hans Verkuil <hverkuil-cisco@xs4all.nl> + +allOf: + - $ref: cec-common.yaml# + +properties: + compatible: + enum: + - nvidia,tegra114-cec + - nvidia,tegra124-cec + - nvidia,tegra210-cec + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cec + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - hdmi-phandle + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x70015000 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; + status = "disabled"; + hdmi-phandle = <&hdmi>; + }; diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml new file mode 100644 index 000000000000..016c8a77c1a6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5PV210 and Exynos HDMI CEC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Marek Szyprowski <m.szyprowski@samsung.com> + +allOf: + - $ref: cec-common.yaml# + +properties: + compatible: + const: samsung,s5p-cec + + clocks: + maxItems: 1 + + clock-names: + items: + - const: hdmicec + + interrupts: + maxItems: 1 + + samsung,syscon-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - hdmi-phandle + - interrupts + - samsung,syscon-phandle + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cec@101b0000 { + compatible = "samsung,s5p-cec"; + reg = <0x101B0000 0x200>; + + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + hdmi-phandle = <&hdmi>; + needs-hpd; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + samsung,syscon-phandle = <&pmu_system_controller>; + }; diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml new file mode 100644 index 000000000000..aeddf16ed339 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STIH4xx HDMI CEC + +maintainers: + - Alain Volmat <alain.volmat@foss.st.com> + +allOf: + - $ref: cec-common.yaml# + +properties: + compatible: + const: st,stih-cec + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cec-clk + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: cec-irq + + resets: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - hdmi-phandle + - interrupts + - resets + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/stih407-resets.h> + + cec@94a087c { + compatible = "st,stih-cec"; + reg = <0x94a087c 0x64>; + + clocks = <&clk_sysin>; + clock-names = "cec-clk"; + hdmi-phandle = <&sti_hdmi>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cec-irq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cec0_default>; + resets = <&softreset STIH407_LPM_SOFTRESET>; + }; diff --git a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml new file mode 100644 index 000000000000..2314a9a14650 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 CEC + +maintainers: + - Yannick Fertre <yannick.fertre@foss.st.com> + +properties: + compatible: + const: st,stm32-cec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Module Clock + - description: Bus Clock + + clock-names: + items: + - const: cec + - const: hdmi-cec + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + cec: cec@40006c00 { + compatible = "st,stm32-cec"; + reg = <0x40006c00 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CEC_K>, <&clk_lse>; + clock-names = "cec", "hdmi-cec"; + }; + +... diff --git a/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml new file mode 100644 index 000000000000..84a5e894ace4 --- /dev/null +++ b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/fsl,imx6ull-pxp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Pixel Pipeline + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + - Michael Tretter <m.tretter@pengutronix.de> + +description: + The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine + that supports scaling, colorspace conversion, alpha blending, rotation, and + pixel conversion via lookup table. Different versions are present on various + i.MX SoCs from i.MX23 to i.MX7. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx6ul-pxp + - fsl,imx6ull-pxp + - fsl,imx7d-pxp + - items: + - enum: + - fsl,imx6sll-pxp + - fsl,imx6sx-pxp + - const: fsl,imx6ull-pxp + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + clock-names: + const: axi + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-pxp + - fsl,imx6ul-pxp + then: + properties: + interrupts: + maxItems: 1 + else: + properties: + interrupts: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6ul-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pxp: pxp@21cc000 { + compatible = "fsl,imx6ull-pxp"; + reg = <0x021cc000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "axi"; + clocks = <&clks IMX6UL_CLK_PXP>; + }; diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt deleted file mode 100644 index f8090e06530d..000000000000 --- a/Documentation/devicetree/bindings/media/fsl-pxp.txt +++ /dev/null @@ -1,26 +0,0 @@ -Freescale Pixel Pipeline -======================== - -The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine -that supports scaling, colorspace conversion, alpha blending, rotation, and -pixel conversion via lookup table. Different versions are present on various -i.MX SoCs from i.MX23 to i.MX7. - -Required properties: -- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28, - imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d. -- reg: the register base and size for the device registers -- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d. -- clock-names: should be "axi" -- clocks: the PXP AXI clock - -Example: - -pxp@21cc000 { - compatible = "fsl,imx6ull-pxp"; - reg = <0x021cc000 0x4000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "axi"; - clocks = <&clks IMX6UL_CLK_PXP>; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ak7375.txt b/Documentation/devicetree/bindings/media/i2c/ak7375.txt deleted file mode 100644 index aa3e24b41241..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ak7375.txt +++ /dev/null @@ -1,8 +0,0 @@ -Asahi Kasei Microdevices AK7375 voice coil lens driver - -AK7375 is a camera voice coil lens. - -Mandatory properties: - -- compatible: "asahi-kasei,ak7375" -- reg: I2C slave address diff --git a/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml new file mode 100644 index 000000000000..22a810fc7222 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/asahi-kasei,ak7375.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Asahi Kasei Microdevices AK7375 voice coil lens actuator + +maintainers: + - Tianshu Qiu <tian.shu.qiu@intel.com> + +description: + AK7375 is a voice coil motor (VCM) camera lens actuator that + is controlled over I2C. + +properties: + compatible: + const: asahi-kasei,ak7375 + + reg: + maxItems: 1 + + vdd-supply: + description: VDD supply + + vio-supply: + description: I/O pull-up supply + +required: + - compatible + - reg + - vdd-supply + - vio-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ak7375: camera-lens@c { + compatible = "asahi-kasei,ak7375"; + reg = <0x0c>; + + vdd-supply = <&vreg_l23a_2p8>; + vio-supply = <&vreg_lvs1a_1p8>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml index 63e5b89d2e0b..af8ada55b3f2 100644 --- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml @@ -13,6 +13,9 @@ description: The Chrontel CH7322 is a discrete HDMI-CEC controller. It is programmable through I2C and drives a single CEC line. +allOf: + - $ref: /schemas/media/cec/cec-common.yaml# + properties: compatible: const: chrontel,ch7322 @@ -40,16 +43,12 @@ properties: if in auto mode. maxItems: 1 - # see ../cec.txt - hdmi-phandle: - description: phandle to the HDMI controller - required: - compatible - reg - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -58,7 +57,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - ch7322@75 { + cec@75 { compatible = "chrontel,ch7322"; reg = <0x75>; interrupts = <47 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index 90315e217003..0c4213adbf6a 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -39,7 +39,7 @@ properties: maxItems: 1 poc-supply: - description: Regulator providing Power over Coax to the cameras + description: Regulator providing Power over Coax to all the ports enable-gpios: description: GPIO connected to the \#PWDN pin with inverted polarity @@ -50,6 +50,21 @@ properties: '#gpio-cells': const: 2 + maxim,bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 24, 27, 32 ] + description: | + The GMSL serial data bus width. This setting is normally controlled by + the BWS pin, but may be overridden with this property. The value must + match the configuration of the remote serializers. + + maxim,i2c-remote-bus-hz: + enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ] + default: 105000 + description: | + The I2C clock frequency for the remote I2C buses. The value must match + the configuration of the remote serializers. + maxim,reverse-channel-microvolt: minimum: 30000 maximum: 200000 @@ -182,21 +197,36 @@ properties: additionalProperties: false +patternProperties: + "^port[0-3]-poc-supply$": + description: Regulator providing Power over Coax for a particular port + required: - compatible - reg - ports - i2c-mux -# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller' -# are not allowed. -if: - required: - - maxim,gpio-poc -then: - properties: - poc-supply: false - gpio-controller: false +allOf: + # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc', + # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is + # present, then 'gpio-controller' isn't allowed. + - if: + required: + - maxim,gpio-poc + then: + properties: + poc-supply: false + gpio-controller: false + patternProperties: + "^port[0-3]-poc-supply$": false + + - if: + required: + - poc-supply + then: + patternProperties: + "^port[0-3]-poc-supply$": false additionalProperties: false @@ -219,6 +249,7 @@ examples: gpio-controller; #gpio-cells = <2>; + maxim,i2c-remote-bus-hz = <339000>; maxim,reverse-channel-microvolt = <170000>; ports { diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml new file mode 100644 index 000000000000..6e089fe1d613 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5670 5 Megapixels raw image sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + +description: |- + The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits + RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is + controlled through an I2C compatible control bus. + +properties: + compatible: + const: ovti,ov5670 + + reg: + maxItems: 1 + + clocks: + description: System clock. From 6 to 27 MHz. + maxItems: 1 + + powerdown-gpios: + description: Reference to the GPIO connected to the PWDNB pin. Active low. + + reset-gpios: + description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. + maxItems: 1 + + avdd-supply: + description: Analog circuit power. Typically 2.8V. + + dvdd-supply: + description: Digital circuit power. Typically 1.2V. + + dovdd-supply: + description: Digital I/O circuit power. Typically 2.8V or 1.8V. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + items: + enum: [1, 2] + + clock-noncontinuous: true + remote-endpoint: true + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5670: sensor@36 { + compatible = "ovti,ov5670"; + reg = <0x36>; + + clocks = <&sensor_xclk>; + + port { + ov5670_ep: endpoint { + remote-endpoint = <&csi_ep>; + data-lanes = <1 2>; + clock-noncontinuous; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml new file mode 100644 index 000000000000..ad07204057f9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5675 CMOS Sensor + +maintainers: + - Quentin Schulz <quentin.schulz@theobroma-systems.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +description: | + The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS + image sensor that delivers 2592x1944 at 30fps. It provides full-frame, + sub-sampled, and windowed 10-bit MIPI images in various formats via the + Serial Camera Control Bus (SCCB) interface. + + This chip is programmable through I2C and two-wire SCCB. The sensor output + is available via CSI-2 serial data output (up to 2-lane). + +properties: + compatible: + const: ovti,ov5675 + + reg: + maxItems: 1 + + clocks: + description: + System input clock (aka XVCLK). From 6 to 27 MHz. + maxItems: 1 + + dovdd-supply: + description: + Digital I/O voltage supply, 1.8 volts. + + avdd-supply: + description: + Analog voltage supply, 2.8 volts. + + dvdd-supply: + description: + Digital core voltage supply, 1.2 volts. + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDN which is physically + active low. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + + # Supports max data transfer of 900 Mbps per lane + link-frequencies: true + +required: + - compatible + - reg + - clocks + - dovdd-supply + - avdd-supply + - dvdd-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/pinctrl/rockchip.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5675: camera@36 { + compatible = "ovti,ov5675"; + reg = <0x36>; + + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + + clocks = <&cru SCLK_CIF_OUT>; + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <19200000>; + + avdd-supply = <&vcc_1v8>; + dvdd-supply = <&vcc_1v2>; + dovdd-supply = <&vcc_2v8>; + + rotation = <90>; + orientation = <0>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml new file mode 100644 index 000000000000..a65f921ec0fd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV8858 Image Sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + - Nicholas Roth <nicholas@rothemail.net> + +description: | + The OmniVision OV8858 is a color CMOS 8 Megapixels (3264x2448) image sensor + controlled through an I2C-compatible SCCB bus. The sensor transmits images + on a MIPI CSI-2 output interface with up to 4 data lanes. + +properties: + compatible: + const: ovti,ov8858 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: XVCLK external clock + + clock-names: + const: xvclk + + dvdd-supply: + description: Digital Domain Power Supply + + avdd-supply: + description: Analog Domain Power Supply + + dovdd-supply: + description: I/O Domain Power Supply + + powerdown-gpios: + description: PWDNB powerdown GPIO (active low) + + reset-gpios: + maxItems: 1 + description: XSHUTDN reset GPIO (active low) + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov8858: camera@36 { + compatible = "ovti,ov8858"; + reg = <0x36>; + + clocks = <&cru SCLK_CIF_OUT>; + clock-names = "xvclk"; + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vcc1v8_dvp>; + + reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml new file mode 100644 index 000000000000..65ad9c100e45 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image + sensor with square pixel array and 1.58 M effective pixels. This chip + features a global shutter with variable charge-integration time. It is + programmable through I2C and 4-wire interfaces. The sensor output is + available via CSI-2 serial data output (1 Lane). + +properties: + compatible: + enum: + - sony,imx296 + - sony,imx296ll + - sony,imx296lq + description: + The IMX296 sensor exists in two different models, a colour variant + (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the + model through registers, allowing for auto-detection with a common + "sony,imx296" compatible string. However, some camera modules disable the + ability to read the sensor model register, which disables this feature. + In those cases, the exact model needs to be specified as "sony,imx296ll" + or "sony,imx296lq". + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz) + items: + - const: inck + + avdd-supply: + description: Analog power supply (3.3V) + + dvdd-supply: + description: Digital power supply (1.2V) + + ovdd-supply: + description: Interface power supply (1.8V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - avdd-supply + - dvdd-supply + - ovdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx296: camera-sensor@1a { + compatible = "sony,imx296"; + reg = <0x1a>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc 90>; + clock-names = "inck"; + + avdd-supply = <&camera_vdda_3v3>; + dvdd-supply = <&camera_vddd_1v2>; + ovdd-supply = <&camera_vddo_1v8>; + + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + + port { + imx296_ep: endpoint { + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml new file mode 100644 index 000000000000..ffccf5f3c9e3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX415 CMOS Image Sensor + +maintainers: + - Michael Riesch <michael.riesch@wolfvision.net> + +description: |- + The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type + solid-state image sensor with a square pixel array and 8.46 M effective + pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface + 1.8 V triple power supply, and has low power consumption. + The IMX415 is programmable through I2C interface. The sensor output is + available via CSI-2 serial data output (two or four lanes). + +allOf: + - $ref: ../video-interface-devices.yaml# + +properties: + compatible: + const: sony,imx415 + + reg: + maxItems: 1 + + clocks: + description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz) + maxItems: 1 + + avdd-supply: + description: Analog power supply (2.9 V) + + dvdd-supply: + description: Digital power supply (1.1 V) + + ovdd-supply: + description: Interface power supply (1.8 V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + flash-leds: true + + lens-focus: true + + orientation: true + + rotation: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - avdd-supply + - dvdd-supply + - ovdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx415: camera-sensor@1a { + compatible = "sony,imx415"; + reg = <0x1a>; + avdd-supply = <&vcc2v9_cam>; + clocks = <&clock_cam>; + dvdd-supply = <&vcc1v1_cam>; + lens-focus = <&vcm>; + orientation = <2>; + ovdd-supply = <&vcc1v8_cam>; + reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>; + rotation = <180>; + + port { + imx415_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&mipi_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml index 4f7b78265336..358019e85d90 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml @@ -37,6 +37,9 @@ properties: items: - const: mclk + power-domains: + maxItems: 1 + port: $ref: /schemas/graph.yaml#/properties/port @@ -50,6 +53,18 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mq-csi + - fsl,imx8mm-csi + then: + required: + - power-domains + examples: - | #include <dt-bindings/clock/imx7d-clock.h> diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt deleted file mode 100644 index e847291d4aff..000000000000 --- a/Documentation/devicetree/bindings/media/s5p-cec.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Samsung HDMI CEC driver - -The HDMI CEC module is present is Samsung SoCs and its purpose is to -handle communication between HDMI connected devices over the CEC bus. - -Required properties: - - compatible : value should be following - "samsung,s5p-cec" - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : HDMI CEC interrupt number to the CPU. - - clocks : from common clock binding: handle to HDMI CEC clock. - - clock-names : from common clock binding: must contain "hdmicec", - corresponding to entry in the clocks property. - - samsung,syscon-phandle - phandle to the PMU system controller - - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. - -Optional: - - needs-hpd : if present the CEC support is only available when the HPD - is high. See cec.txt for more details. - -Example: - -hdmicec: cec@100b0000 { - compatible = "samsung,s5p-cec"; - reg = <0x100B0000 0x200>; - interrupts = <0 114 0>; - clocks = <&clock CLK_HDMI_CEC>; - clock-names = "hdmicec"; - samsung,syscon-phandle = <&pmu_system_controller>; - hdmi-phandle = <&hdmi>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; -}; diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt deleted file mode 100644 index ece0832fdeaf..000000000000 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ /dev/null @@ -1,27 +0,0 @@ -STMicroelectronics STIH4xx HDMI CEC driver - -Required properties: - - compatible : value should be "st,stih-cec" - - reg : Physical base address of the IP registers and length of memory - mapped region. - - clocks : from common clock binding: handle to HDMI CEC clock - - interrupts : HDMI CEC interrupt number to the CPU. - - pinctrl-names: Contains only one value - "default" - - pinctrl-0: Specifies the pin control groups used for CEC hardware. - - resets: Reference to a reset controller - - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt. - -Example for STIH407: - -sti-cec@94a087c { - compatible = "st,stih-cec"; - reg = <0x94a087c 0x64>; - clocks = <&clk_sysin>; - clock-names = "cec-clk"; - interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>; - interrupt-names = "cec-irq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cec0_default>; - resets = <&softreset STIH407_LPM_SOFTRESET>; - hdmi-phandle = <&hdmi>; -}; diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt deleted file mode 100644 index c503f06f3b84..000000000000 --- a/Documentation/devicetree/bindings/media/tegra-cec.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Tegra HDMI CEC hardware - -The HDMI CEC module is present in Tegra SoCs and its purpose is to -handle communication between HDMI connected devices over the CEC bus. - -Required properties: - - compatible : value should be one of the following: - "nvidia,tegra114-cec" - "nvidia,tegra124-cec" - "nvidia,tegra210-cec" - - reg : Physical base address of the IP registers and length of memory - mapped region. - - interrupts : HDMI CEC interrupt number to the CPU. - - clocks : from common clock binding: handle to HDMI CEC clock. - - clock-names : from common clock binding: must contain "cec", - corresponding to the entry in the clocks property. - - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. - -Example: - -cec@70015000 { - compatible = "nvidia,tegra124-cec"; - reg = <0x0 0x70015000 0x0 0x00001000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_CEC>; - clock-names = "cec"; -}; diff --git a/Documentation/driver-api/media/drivers/cpia2_devel.rst b/Documentation/driver-api/media/drivers/cpia2_devel.rst deleted file mode 100644 index decaa4768c78..000000000000 --- a/Documentation/driver-api/media/drivers/cpia2_devel.rst +++ /dev/null @@ -1,56 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The cpia2 driver -================ - -Authors: Peter Pregler <Peter_Pregler@email.com>, -Scott J. Bertin <scottbertin@yahoo.com>, and -Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which -this one was modelled from. - - -Notes to developers -~~~~~~~~~~~~~~~~~~~ - - - This is a driver version stripped of the 2.4 back compatibility - and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support. - -Programmer's overview of cpia2 driver -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a -division of ST Microelectronics). There are two versions. The first is the -STV0672, which is capable of up to 30 frames per second (fps) in frame sizes -up to CIF, and 15 fps for VGA frames. The STV0676 is an improved version, -which can handle up to 30 fps VGA. Both coprocessors can be attached to two -CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor. These will -be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors. - -The two chipsets operate almost identically. The core is an 8051 processor, -running two different versions of firmware. The 672 runs the VP4 video -processor code, the 676 runs VP5. There are a few differences in register -mappings for the two chips. In these cases, the symbols defined in the -header files are marked with VP4 or VP5 as part of the symbol name. - -The cameras appear externally as three sets of registers. Setting register -values is the only way to control the camera. Some settings are -interdependant, such as the sequence required to power up the camera. I will -try to make note of all of these cases. - -The register sets are called blocks. Block 0 is the system block. This -section is always powered on when the camera is plugged in. It contains -registers that control housekeeping functions such as powering up the video -processor. The video processor is the VP block. These registers control -how the video from the sensor is processed. Examples are timing registers, -user mode (vga, qvga), scaling, cropping, framerates, and so on. The last -block is the video compressor (VC). The video stream sent from the camera is -compressed as Motion JPEG (JPEGA). The VC controls all of the compression -parameters. Looking at the file cpia2_registers.h, you can get a full view -of these registers and the possible values for most of them. - -One or more registers can be set or read by sending a usb control message to -the camera. There are three modes for this. Block mode requests a number -of contiguous registers. Random mode reads or writes random registers with -a tuple structure containing address/value pairs. The repeat mode is only -used by VP4 to load a firmware patch. It contains a starting address and -a sequence of bytes to be written into a gpio port. diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst index 3c17d48f83c0..c4123a16b5f9 100644 --- a/Documentation/driver-api/media/drivers/index.rst +++ b/Documentation/driver-api/media/drivers/index.rst @@ -13,7 +13,6 @@ Video4Linux (V4L) drivers :maxdepth: 5 bttv-devel - cpia2_devel cx2341x-devel cx88-devel fimc-devel diff --git a/Documentation/driver-api/media/mc-core.rst b/Documentation/driver-api/media/mc-core.rst index 400b8ca29367..2456950ce8ff 100644 --- a/Documentation/driver-api/media/mc-core.rst +++ b/Documentation/driver-api/media/mc-core.rst @@ -232,12 +232,10 @@ prevent link states from being modified during streaming by calling The function will mark all the pads which are part of the pipeline as streaming. -The struct media_pipeline instance pointed to by -the pipe argument will be stored in every pad in the pipeline. -Drivers should embed the struct media_pipeline -in higher-level pipeline structures and can then access the -pipeline through the struct media_pad -pipe field. +The struct media_pipeline instance pointed to by the pipe argument will be +stored in every pad in the pipeline. Drivers should embed the struct +media_pipeline in higher-level pipeline structures and can then access the +pipeline through the struct media_pad pipe field. Calls to :c:func:`media_pipeline_start()` can be nested. The pipeline pointer must be identical for all nested calls to the function. diff --git a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst index 8797037c4e2e..602dadaa81d8 100644 --- a/Documentation/driver-api/media/v4l2-subdev.rst +++ b/Documentation/driver-api/media/v4l2-subdev.rst @@ -593,6 +593,14 @@ before calling v4l2_subdev_init_finalize(): This shares the driver's private mutex between the controls and the states. +Streams, multiplexed media pads and internal routing +---------------------------------------------------- + +A subdevice driver can implement support for multiplexed streams by setting +the V4L2_SUBDEV_FL_STREAMS subdev flag and implementing support for +centrally managed subdev active state, routing and stream based +configuration. + V4L2 sub-device functions and data structures --------------------------------------------- diff --git a/Documentation/userspace-api/media/drivers/aspeed-video.rst b/Documentation/userspace-api/media/drivers/aspeed-video.rst index 1b0cb1e3eba8..567387aca6b0 100644 --- a/Documentation/userspace-api/media/drivers/aspeed-video.rst +++ b/Documentation/userspace-api/media/drivers/aspeed-video.rst @@ -23,7 +23,7 @@ proprietary mode. More details on the ASPEED video hardware operations can be found in *chapter 6.2.16 KVM Video Driver* of SDK_User_Guide which available on -AspeedTech-BMC/openbmc/releases. +`github <https://github.com/AspeedTech-BMC/openbmc/releases/>`__. The ASPEED video driver implements the following driver-specific control: diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst index 915dbf0f4db5..6708d649afd7 100644 --- a/Documentation/userspace-api/media/drivers/index.rst +++ b/Documentation/userspace-api/media/drivers/index.rst @@ -37,7 +37,6 @@ For more details see the file COPYING in the source distribution of Linux. dw100 imx-uapi max2175 - meye-uapi omap3isp-uapi st-vgxy61 uvcvideo diff --git a/Documentation/userspace-api/media/drivers/meye-uapi.rst b/Documentation/userspace-api/media/drivers/meye-uapi.rst deleted file mode 100644 index 66b1c142f920..000000000000 --- a/Documentation/userspace-api/media/drivers/meye-uapi.rst +++ /dev/null @@ -1,53 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -.. include:: <isonum.txt> - -Vaio Picturebook Motion Eye Camera Driver -========================================= - -Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net> - -Copyright |copy| 2001-2002 Alcôve <www.alcove.com> - -Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org> - -Private API ------------ - -The driver supports frame grabbing with the video4linux API, -so all video4linux tools (like xawtv) should work with this driver. - -Besides the video4linux interface, the driver has a private interface -for accessing the Motion Eye extended parameters (camera sharpness, -agc, video framerate), the snapshot and the MJPEG capture facilities. - -This interface consists of several ioctls (prototypes and structures -can be found in include/linux/meye.h): - -MEYEIOC_G_PARAMS and MEYEIOC_S_PARAMS - Get and set the extended parameters of the motion eye camera. - The user should always query the current parameters with - MEYEIOC_G_PARAMS, change what he likes and then issue the - MEYEIOC_S_PARAMS call (checking for -EINVAL). The extended - parameters are described by the meye_params structure. - - -MEYEIOC_QBUF_CAPT - Queue a buffer for capture (the buffers must have been - obtained with a VIDIOCGMBUF call and mmap'ed by the - application). The argument to MEYEIOC_QBUF_CAPT is the - buffer number to queue (or -1 to end capture). The first - call to MEYEIOC_QBUF_CAPT starts the streaming capture. - -MEYEIOC_SYNC - Takes as an argument the buffer number you want to sync. - This ioctl blocks until the buffer is filled and ready - for the application to use. It returns the buffer size. - -MEYEIOC_STILLCAPT and MEYEIOC_STILLJCAPT - Takes a snapshot in an uncompressed or compressed jpeg format. - This ioctl blocks until the snapshot is done and returns (for - jpeg snapshot) the size of the image. The image data is - available from the first mmap'ed buffer. - -Look at the 'motioneye' application code for an actual example. diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst index fd1de0a73a9f..a4f1df7093e8 100644 --- a/Documentation/userspace-api/media/v4l/dev-subdev.rst +++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst @@ -29,6 +29,8 @@ will feature a character device node on which ioctls can be called to - negotiate image formats on individual pads +- inspect and modify internal data routing between pads of the same entity + Sub-device character device nodes, conventionally named ``/dev/v4l-subdev*``, use major number 81. @@ -404,6 +406,8 @@ pixel array is not rectangular but cross-shaped or round. The maximum size may also be smaller than the BOUNDS rectangle. +.. _format-propagation: + Order of configuration and format propagation --------------------------------------------- @@ -501,3 +505,165 @@ source pads. :maxdepth: 1 subdev-formats + +Streams, multiplexed media pads and internal routing +---------------------------------------------------- + +Simple V4L2 sub-devices do not support multiple, unrelated video streams, +and only a single stream can pass through a media link and a media pad. +Thus each pad contains a format and selection configuration for that +single stream. A subdev can do stream processing and split a stream into +two or compose two streams into one, but the inputs and outputs for the +subdev are still a single stream per pad. + +Some hardware, e.g. MIPI CSI-2, support multiplexed streams, that is, multiple +data streams are transmitted on the same bus, which is represented by a media +link connecting a transmitter source pad with a sink pad on the receiver. For +example, a camera sensor can produce two distinct streams, a pixel stream and a +metadata stream, which are transmitted on the multiplexed data bus, represented +by a media link which connects the single sensor's source pad with the receiver +sink pad. The stream-aware receiver will de-multiplex the streams received on +the its sink pad and allows to route them individually to one of its source +pads. + +Subdevice drivers that support multiplexed streams are compatible with +non-multiplexed subdev drivers, but, of course, require a routing configuration +where the link between those two types of drivers contains only a single +stream. + +Understanding streams +^^^^^^^^^^^^^^^^^^^^^ + +A stream is a stream of content (e.g. pixel data or metadata) flowing through +the media pipeline from a source (e.g. a sensor) towards the final sink (e.g. a +receiver and demultiplexer in a SoC). Each media link carries all the enabled +streams from one end of the link to the other, and sub-devices have routing +tables which describe how the incoming streams from sink pads are routed to the +source pads. + +A stream ID is a media pad-local identifier for a stream. Streams IDs of +the same stream must be equal on both ends of a link. In other words, +a particular stream ID must exist on both sides of a media +link, but another stream ID can be used for the same stream at the other side +of the sub-device. + +A stream at a specific point in the media pipeline is identified by the +sub-device and a (pad, stream) pair. For sub-devices that do not support +multiplexed streams the 'stream' field is always 0. + +Interaction between routes, streams, formats and selections +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The addition of streams to the V4L2 sub-device interface moves the sub-device +formats and selections from pads to (pad, stream) pairs. Besides the +usual pad, also the stream ID needs to be provided for setting formats and +selections. The order of configuring formats and selections along a stream is +the same as without streams (see :ref:`format-propagation`). + +Instead of the sub-device wide merging of streams from all sink pads +towards all source pads, data flows for each route are separate from each +other. Any number of routes from streams on sink pads towards streams on +source pads is allowed, to the extent supported by drivers. For every +stream on a source pad, however, only a single route is allowed. + +Any configurations of a stream within a pad, such as format or selections, +are independent of similar configurations on other streams. This is +subject to change in the future. + +Configuring streams +^^^^^^^^^^^^^^^^^^^ + +The configuration of the streams is done individually for each sub-device and +the validity of the streams between sub-devices is validated when the pipeline +is started. + +There are three steps in configuring the streams: + +1) Set up links. Connect the pads between sub-devices using the :ref:`Media +Controller API <media_controller>` + +2) Streams. Streams are declared and their routing is configured by +setting the routing table for the sub-device using +:ref:`VIDIOC_SUBDEV_S_ROUTING <VIDIOC_SUBDEV_G_ROUTING>` ioctl. Note that +setting the routing table will reset formats and selections in the +sub-device to default values. + +3) Configure formats and selections. Formats and selections of each stream +are configured separately as documented for plain sub-devices in +:ref:`format-propagation`. The stream ID is set to the same stream ID +associated with either sink or source pads of routes configured using the +:ref:`VIDIOC_SUBDEV_S_ROUTING <VIDIOC_SUBDEV_G_ROUTING>` ioctl. + +Multiplexed streams setup example +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +A simple example of a multiplexed stream setup might be as follows: + +- Two identical sensors (Sensor A and Sensor B). Each sensor has a single source + pad (pad 0) which carries a pixel data stream. + +- Multiplexer bridge (Bridge). The bridge has two sink pads, connected to the + sensors (pads 0, 1), and one source pad (pad 2), which outputs two streams. + +- Receiver in the SoC (Receiver). The receiver has a single sink pad (pad 0), + connected to the bridge, and two source pads (pads 1-2), going to the DMA + engine. The receiver demultiplexes the incoming streams to the source pads. + +- DMA Engines in the SoC (DMA Engine), one for each stream. Each DMA engine is + connected to a single source pad in the receiver. + +The sensors, the bridge and the receiver are modeled as V4L2 sub-devices, +exposed to userspace via /dev/v4l-subdevX device nodes. The DMA engines are +modeled as V4L2 devices, exposed to userspace via /dev/videoX nodes. + +To configure this pipeline, the userspace must take the following steps: + +1) Set up media links between entities: connect the sensors to the bridge, +bridge to the receiver, and the receiver to the DMA engines. This step does +not differ from normal non-multiplexed media controller setup. + +2) Configure routing + +.. flat-table:: Bridge routing table + :header-rows: 1 + + * - Sink Pad/Stream + - Source Pad/Stream + - Routing Flags + - Comments + * - 0/0 + - 2/0 + - V4L2_SUBDEV_ROUTE_FL_ACTIVE + - Pixel data stream from Sensor A + * - 1/0 + - 2/1 + - V4L2_SUBDEV_ROUTE_FL_ACTIVE + - Pixel data stream from Sensor B + +.. flat-table:: Receiver routing table + :header-rows: 1 + + * - Sink Pad/Stream + - Source Pad/Stream + - Routing Flags + - Comments + * - 0/0 + - 1/0 + - V4L2_SUBDEV_ROUTE_FL_ACTIVE + - Pixel data stream from Sensor A + * - 0/1 + - 2/0 + - V4L2_SUBDEV_ROUTE_FL_ACTIVE + - Pixel data stream from Sensor B + +3) Configure formats and selections + +After configuring routing, the next step is configuring the formats and +selections for the streams. This is similar to performing this step without +streams, with just one exception: the ``stream`` field needs to be assigned +to the value of the stream ID. + +A common way to accomplish this is to start from the sensors and propagate the +configurations along the stream towards the receiver, +using :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctls to configure each +stream endpoint in each sub-device. diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst index 73cd99828010..58f6ae25b2e7 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst @@ -271,7 +271,7 @@ please make a proposal on the linux-media mailing list. The implementation is based on AST2600 A3 datasheet, revision 0.9, which is not publicly available. Or you can reference Video stream data format – ASPEED mode compression of SDK_User_Guide which available on - AspeedTech-BMC/openbmc/releases. + `github <https://github.com/AspeedTech-BMC/openbmc/releases/>`__. Decoder's implementation can be found here, `aspeed_codec <https://github.com/AspeedTech-BMC/aspeed_codec/>`__ diff --git a/Documentation/userspace-api/media/v4l/user-func.rst b/Documentation/userspace-api/media/v4l/user-func.rst index 53e604bd7d60..228c1521f190 100644 --- a/Documentation/userspace-api/media/v4l/user-func.rst +++ b/Documentation/userspace-api/media/v4l/user-func.rst @@ -70,6 +70,7 @@ Function Reference vidioc-subdev-g-crop vidioc-subdev-g-fmt vidioc-subdev-g-frame-interval + vidioc-subdev-g-routing vidioc-subdev-g-selection vidioc-subdev-querycap vidioc-subscribe-event diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst index 3703943b412f..8def4c05d3da 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst @@ -92,7 +92,10 @@ multiple pads of the same sub-device is not defined. - Frame intervals to be enumerated, from enum :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`. * - __u32 - - ``reserved``\ [8] + - ``stream`` + - Stream identifier. + * - __u32 + - ``reserved``\ [7] - Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst index c25a9896df0e..3ef361c0dca7 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst @@ -97,7 +97,10 @@ information about try formats. - Frame sizes to be enumerated, from enum :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`. * - __u32 - - ``reserved``\ [8] + - ``stream`` + - Stream identifier. + * - __u32 + - ``reserved``\ [7] - Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst index 417f1a19bcc4..248f6f9ee7c5 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst @@ -73,7 +73,10 @@ information about the try formats. - ``flags`` - See :ref:`v4l2-subdev-mbus-code-flags` * - __u32 - - ``reserved``\ [7] + - ``stream`` + - Stream identifier. + * - __u32 + - ``reserved``\ [6] - Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst index bd15c0a5a66b..1d267f7e7991 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst @@ -96,7 +96,10 @@ modified format should be as close as possible to the original request. - ``rect`` - Crop rectangle boundaries, in pixels. * - __u32 - - ``reserved``\ [8] + - ``stream`` + - Stream identifier. + * - __u32 + - ``reserved``\ [7] - Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst index 7acdbb939d89..ed253a1e44b7 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst @@ -102,7 +102,10 @@ should be as close as possible to the original request. - Definition of an image format, see :c:type:`v4l2_mbus_framefmt` for details. * - __u32 - - ``reserved``\ [8] + - ``stream`` + - Stream identifier. + * - __u32 + - ``reserved``\ [7] - Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst index d7fe7543c506..842f962d2aea 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst @@ -90,7 +90,10 @@ the same sub-device is not defined. - ``interval`` - Period, in seconds, between consecutive video frames. * - __u32 - - ``reserved``\ [9] + - ``stream`` + - Stream identifier. + * - __u32 + - ``reserved``\ [8] - Reserved for future extensions. Applications and drivers must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst new file mode 100644 index 000000000000..68ca343c3b44 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst @@ -0,0 +1,147 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L + +.. _VIDIOC_SUBDEV_G_ROUTING: + +****************************************************** +ioctl VIDIOC_SUBDEV_G_ROUTING, VIDIOC_SUBDEV_S_ROUTING +****************************************************** + +Name +==== + +VIDIOC_SUBDEV_G_ROUTING - VIDIOC_SUBDEV_S_ROUTING - Get or set routing between streams of media pads in a media entity. + + +Synopsis +======== + +.. c:macro:: VIDIOC_SUBDEV_G_ROUTING + +``int ioctl(int fd, VIDIOC_SUBDEV_G_ROUTING, struct v4l2_subdev_routing *argp)`` + +.. c:macro:: VIDIOC_SUBDEV_S_ROUTING + +``int ioctl(int fd, VIDIOC_SUBDEV_S_ROUTING, struct v4l2_subdev_routing *argp)`` + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <func-open>`. + +``argp`` + Pointer to struct :c:type:`v4l2_subdev_routing`. + + +Description +=========== + +These ioctls are used to get and set the routing in a media entity. +The routing configuration determines the flows of data inside an entity. + +Drivers report their current routing tables using the +``VIDIOC_SUBDEV_G_ROUTING`` ioctl and application may enable or disable routes +with the ``VIDIOC_SUBDEV_S_ROUTING`` ioctl, by adding or removing routes and +setting or clearing flags of the ``flags`` field of a +struct :c:type:`v4l2_subdev_route`. + +All stream configurations are reset when ``VIDIOC_SUBDEV_S_ROUTING`` is called. This +means that the userspace must reconfigure all streams after calling the ioctl +with e.g. ``VIDIOC_SUBDEV_S_FMT``. + +Only subdevices which have both sink and source pads can support routing. + +When inspecting routes through ``VIDIOC_SUBDEV_G_ROUTING`` and the application +provided ``num_routes`` is not big enough to contain all the available routes +the subdevice exposes, drivers return the ENOSPC error code and adjust the +value of the ``num_routes`` field. Application should then reserve enough memory +for all the route entries and call ``VIDIOC_SUBDEV_G_ROUTING`` again. + +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| + +.. c:type:: v4l2_subdev_routing + +.. flat-table:: struct v4l2_subdev_routing + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``which`` + - Format to modified, from enum + :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`. + * - struct :c:type:`v4l2_subdev_route` + - ``routes[]`` + - Array of struct :c:type:`v4l2_subdev_route` entries + * - __u32 + - ``num_routes`` + - Number of entries of the routes array + * - __u32 + - ``reserved``\ [5] + - Reserved for future extensions. Applications and drivers must set + the array to zero. + +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| + +.. c:type:: v4l2_subdev_route + +.. flat-table:: struct v4l2_subdev_route + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``sink_pad`` + - Sink pad number. + * - __u32 + - ``sink_stream`` + - Sink pad stream number. + * - __u32 + - ``source_pad`` + - Source pad number. + * - __u32 + - ``source_stream`` + - Source pad stream number. + * - __u32 + - ``flags`` + - Route enable/disable flags + :ref:`v4l2_subdev_routing_flags <v4l2-subdev-routing-flags>`. + * - __u32 + - ``reserved``\ [5] + - Reserved for future extensions. Applications and drivers must set + the array to zero. + +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| + +.. _v4l2-subdev-routing-flags: + +.. flat-table:: enum v4l2_subdev_routing_flags + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * - V4L2_SUBDEV_ROUTE_FL_ACTIVE + - 0 + - The route is enabled. Set by applications. + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +ENOSPC + The application provided ``num_routes`` is not big enough to contain + all the available routes the subdevice exposes. + +EINVAL + The sink or source pad identifiers reference a non-existing pad, or reference + pads of different types (ie. the sink_pad identifiers refers to a source pad) + or the sink or source stream identifiers reference a non-existing stream on + the sink or source pad. + +E2BIG + The application provided ``num_routes`` for ``VIDIOC_SUBDEV_S_ROUTING`` is + larger than the number of routes the driver can handle. diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst index f9172a42f036..6b629c19168c 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst @@ -94,7 +94,10 @@ Selection targets and flags are documented in - ``r`` - Selection rectangle, in pixels. * - __u32 - - ``reserved``\ [8] + - ``stream`` + - Stream identifier. + * - __u32 + - ``reserved``\ [7] - Reserved for future extensions. Applications and drivers must set the array to zero. |