summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorJoakim Zhang <qiangqing.zhang@nxp.com>2021-07-19 15:18:20 +0800
committerDavid S. Miller <davem@davemloft.net>2021-07-19 10:07:01 -0700
commite314a07ef263916f761b736ded7a30894709dfd7 (patch)
treeffe430481e127407863afed2a1e3295debadc9fb /Documentation
parentbdad810eb97875813a067504424a483aaa309bad (diff)
dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yaml
In order to automate the verification of DT nodes covert imx-dwmac to nxp,dwmac-imx.yaml, and pass below checking. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/imx-dwmac.txt56
-rw-r--r--Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml93
2 files changed, 93 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/net/imx-dwmac.txt b/Documentation/devicetree/bindings/net/imx-dwmac.txt
deleted file mode 100644
index 921d522fe8d7..000000000000
--- a/Documentation/devicetree/bindings/net/imx-dwmac.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP.
-
-This file documents platform glue layer for IMX.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible: Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
- and "snps,dwmac-5.10a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
- Should be "pclk" for the MAC apb clock.
- Should be "ptp_ref" for the MAC timer clock.
- Should be "tx" for the MAC RGMII TX clock:
- Should be "mem" for EQOS MEM clock.
- - "mem" clock is required for imx8dxl platform.
- - "mem" clock is not required for imx8mp platform.
-- interrupt-names: Should contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Should be "macirq" for the main MAC IRQ
- Should be "eth_wake_irq" for the IT which wake up system
-- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
- encompases the GPR register, and the offset of the GPR register.
- - required for imx8mp platform.
- - is optional for imx8dxl platform.
-
-Optional properties:
-- intf_mode: is optional for imx8dxl platform.
-- snps,rmii_refclk_ext: to select RMII reference clock from external.
-
-Example:
- eqos: ethernet@30bf0000 {
- compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
- reg = <0x30bf0000 0x10000>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eth_wake_irq", "macirq";
- clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
- <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
- <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
- <&clk IMX8MP_CLK_ENET_QOS>;
- clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
- assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
- <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
- <&clk IMX8MP_CLK_ENET_QOS>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
- <&clk IMX8MP_SYS_PLL2_100M>,
- <&clk IMX8MP_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <100000000>, <125000000>;
- nvmem-cells = <&eth_mac0>;
- nvmem-cell-names = "mac-address";
- nvmem_macaddr_swap;
- intf_mode = <&gpr 0x4>;
- status = "disabled";
- };
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
new file mode 100644
index 000000000000..5629b2e4ccf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+
+maintainers:
+ - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,imx8mp-dwmac-eqos
+ - nxp,imx8dxl-dwmac-eqos
+ required:
+ - compatible
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - nxp,imx8mp-dwmac-eqos
+ - nxp,imx8dxl-dwmac-eqos
+ - const: snps,dwmac-5.10a
+
+ clocks:
+ minItems: 3
+ maxItems: 5
+ items:
+ - description: MAC host clock
+ - description: MAC apb clock
+ - description: MAC timer clock
+ - description: MAC RGMII TX clock
+ - description: EQOS MEM clock
+
+ clock-names:
+ minItems: 3
+ maxItems: 5
+ contains:
+ enum:
+ - stmmaceth
+ - pclk
+ - ptp_ref
+ - tx
+ - mem
+
+ intf_mode:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the GPR register, and the offset of the GPR register.
+
+ snps,rmii_refclk_ext:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ To select RMII reference clock from external.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/imx8mp-clock.h>
+
+ eqos: ethernet@30bf0000 {
+ compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+ reg = <0x30bf0000 0x10000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+ <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+ <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+ <&clk IMX8MP_CLK_ENET_QOS>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+ phy-mode = "rgmii";
+ status = "disabled";
+ };