summaryrefslogtreecommitdiff
path: root/drivers/clk/tegra/clk-tegra114.c
diff options
context:
space:
mode:
authorAndrew Bresticker <abrestic@chromium.org>2016-05-26 12:41:31 -0400
committerThierry Reding <treding@nvidia.com>2016-06-30 17:43:17 +0200
commit15d68e8c2e95e8b62465c7cb3bc642784365ee1b (patch)
tree4d4fbd41dae32aa51be48aa9a2e31fb02a9a080e /drivers/clk/tegra/clk-tegra114.c
parent74d3ba0b6f1b22ed02ae16031c741822c9928793 (diff)
clk: tegra: Initialize UTMI PLL when enabling PLLU
Move the UTMI PLL initialization code form clk-tegra<chip>.c files into clk-pll.c. UTMI PLL was being configured and set in HW control right after registration. However, when the clock init_table is processed and child clks of PLLU are enabled, it will call in and enable PLLU as well, and initiate SW enabling sequence even though PLLU is already in HW control. This leads to getting UTMIPLL stuck with a SEQ_BUSY status. Doing the initialization once during pllu_enable means we configure it properly into HW control. A side effect of the commonization/localization of the UTMI PLL init code, is that it corrects some errors that were present for earlier generations. For instance, in clk-tegra124.c, it used to have: #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) when the correct shift to use is present in the new version: #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) which matches the Tegra124 TRM register definition. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> [rklein: Merged in some later fixes for potential deadlocks] Signed-off-by: Rhyland Klein <rklein@nvidia.com> [treding: coding style bike-shedding, remove unused variable] Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'drivers/clk/tegra/clk-tegra114.c')
-rw-r--r--drivers/clk/tegra/clk-tegra114.c156
1 files changed, 2 insertions, 154 deletions
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index b78054fac0a8..64da7b79a6e4 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -113,32 +113,6 @@
#define CCLKG_BURST_POLICY 0x368
-#define UTMIP_PLL_CFG2 0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
-
-#define UTMIP_PLL_CFG1 0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
-
-#define UTMIPLL_HW_PWRDN_CFG0 0x52c
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
-#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
-#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
-
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c
@@ -649,43 +623,6 @@ static unsigned long tegra114_input_freq[] = {
#define MASK(x) (BIT(x) - 1)
-struct utmi_clk_param {
- /* Oscillator Frequency in KHz */
- u32 osc_frequency;
- /* UTMIP PLL Enable Delay Count */
- u8 enable_delay_count;
- /* UTMIP PLL Stable count */
- u8 stable_count;
- /* UTMIP PLL Active delay count */
- u8 active_delay_count;
- /* UTMIP PLL Xtal frequency count */
- u8 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
- {
- .osc_frequency = 13000000, .enable_delay_count = 0x02,
- .stable_count = 0x33, .active_delay_count = 0x05,
- .xtal_freq_count = 0x7f
- }, {
- .osc_frequency = 19200000, .enable_delay_count = 0x03,
- .stable_count = 0x4b, .active_delay_count = 0x06,
- .xtal_freq_count = 0xbb
- }, {
- .osc_frequency = 12000000, .enable_delay_count = 0x02,
- .stable_count = 0x2f, .active_delay_count = 0x04,
- .xtal_freq_count = 0x76
- }, {
- .osc_frequency = 26000000, .enable_delay_count = 0x04,
- .stable_count = 0x66, .active_delay_count = 0x09,
- .xtal_freq_count = 0xfe
- }, {
- .osc_frequency = 16800000, .enable_delay_count = 0x03,
- .stable_count = 0x41, .active_delay_count = 0x0a,
- .xtal_freq_count = 0xa4
- },
-};
-
/* peripheral mux definitions */
static const char *mux_plld_out0_plld2_out0[] = {
@@ -986,92 +923,9 @@ static void __init tegra114_fixed_clk_init(void __iomem *clk_base)
}
-static __init void tegra114_utmi_param_configure(void __iomem *clk_base)
-{
- unsigned int i;
- u32 reg;
-
- for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
- if (osc_freq == utmi_parameters[i].osc_frequency)
- break;
- }
-
- if (i >= ARRAY_SIZE(utmi_parameters)) {
- pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
- osc_freq);
- return;
- }
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL stable and active counts */
- /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
- reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
- reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
-
- reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
- active_delay_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
-
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL delay and oscillator frequency counts */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
- enable_delay_count);
-
- reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
- reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
- xtal_freq_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- /* Setup HW control of UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- udelay(1);
-
- /* Setup SW override of UTMIPLL assuming USB2.0
- ports are assigned to USB2 */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- udelay(1);
-
- /* Enable HW control UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-}
-
static void __init tegra114_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
- u32 val;
struct clk *clk;
/* PLLC */
@@ -1118,16 +972,10 @@ static void __init tegra114_pll_init(void __iomem *clk_base,
CLK_SET_RATE_PARENT, 1, 1);
/* PLLU */
- val = readl(clk_base + pll_u_params.base_reg);
- val &= ~BIT(24); /* disable PLLU_OVERRIDE */
- writel(val, clk_base + pll_u_params.base_reg);
-
- clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
- &pll_u_params, &pll_u_lock);
+ clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
+ &pll_u_params, &pll_u_lock);
clks[TEGRA114_CLK_PLL_U] = clk;
- tegra114_utmi_param_configure(clk_base);
-
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,