cxl/mbox: Add sanitization handling machinery

Sanitization is by definition a device-monopolizing operation, and thus
the timeslicing rules for other background commands do not apply.
As such handle this special case asynchronously and return immediately.
Subsequent changes will allow completion to be pollable from userspace
via a sysfs file interface.

For devices that don't support interrupts for notifying background
command completion, self-poll with the caveat that the poller can
be out of sync with the ready hardware, and therefore care must be
taken to not allow any new commands to go through until the poller
sees the hw completion. The poller takes the mbox_mutex to stabilize
the flagging, minimizing any runtime overhead in the send path to
check for 'sanitize_tmo' for uncommon poll scenarios.

The irq case is much simpler as hardware will serialize/error
appropriately.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230612181038.14421-4-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

3 files changed, 91 insertions, 3 deletions

diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
index 1bbb7e39fc93..834f418b6bcb 100644
--- a/drivers/cxl/core/memdev.c
+++ b/drivers/cxl/core/memdev.c
@@ -460,11 +460,21 @@ void clear_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cm
 }
 EXPORT_SYMBOL_NS_GPL(clear_exclusive_cxl_commands, CXL);
 
+static void cxl_memdev_security_shutdown(struct device *dev)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_dev_state *cxlds = cxlmd->cxlds;
+
+	if (cxlds->security.poll)
+		cancel_delayed_work_sync(&cxlds->security.poll_dwork);
+}
+
 static void cxl_memdev_shutdown(struct device *dev)
 {
 	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
 
 	down_write(&cxl_memdev_rwsem);
+	cxl_memdev_security_shutdown(dev);
 	cxlmd->cxlds = NULL;
 	up_write(&cxl_memdev_rwsem);
 }
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 091f1200736b..698cd10aea4a 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -264,9 +264,15 @@ struct cxl_poison_state {
  * struct cxl_security_state - Device security state
  *
  * @state: state of last security operation
+ * @poll: polling for sanitization is enabled, device has no mbox irq support
+ * @poll_tmo_secs: polling timeout
+ * @poll_dwork: polling work item
  */
 struct cxl_security_state {
 	unsigned long state;
+	bool poll;
+	int poll_tmo_secs;
+	struct delayed_work poll_dwork;
 };
 
 /**
@@ -379,6 +385,7 @@ enum cxl_opcode {
 	CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS	= 0x4303,
 	CXL_MBOX_OP_SCAN_MEDIA		= 0x4304,
 	CXL_MBOX_OP_GET_SCAN_MEDIA	= 0x4305,
+	CXL_MBOX_OP_SANITIZE		= 0x4400,
 	CXL_MBOX_OP_GET_SECURITY_STATE	= 0x4500,
 	CXL_MBOX_OP_SET_PASSPHRASE	= 0x4501,
 	CXL_MBOX_OP_DISABLE_PASSPHRASE	= 0x4502,
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 4b2575502f49..8f1309577653 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -115,18 +115,52 @@ static bool cxl_mbox_background_complete(struct cxl_dev_state *cxlds)
 
 static irqreturn_t cxl_pci_mbox_irq(int irq, void *id)
 {
+	u64 reg;
+	u16 opcode;
 	struct cxl_dev_id *dev_id = id;
 	struct cxl_dev_state *cxlds = dev_id->cxlds;
 
 	if (!cxl_mbox_background_complete(cxlds))
 		return IRQ_NONE;
 
-	/* short-circuit the wait in __cxl_pci_mbox_send_cmd() */
-	rcuwait_wake_up(&cxlds->mbox_wait);
+	reg = readq(cxlds->regs.mbox + CXLDEV_MBOX_BG_CMD_STATUS_OFFSET);
+	opcode = FIELD_GET(CXLDEV_MBOX_BG_CMD_COMMAND_OPCODE_MASK, reg);
+	if (opcode == CXL_MBOX_OP_SANITIZE) {
+		dev_dbg(cxlds->dev, "Sanitization operation ended\n");
+	} else {
+		/* short-circuit the wait in __cxl_pci_mbox_send_cmd() */
+		rcuwait_wake_up(&cxlds->mbox_wait);
+	}
 
 	return IRQ_HANDLED;
 }
 
+/*
+ * Sanitization operation polling mode.
+ */
+static void cxl_mbox_sanitize_work(struct work_struct *work)
+{
+	struct cxl_dev_state *cxlds;
+
+	cxlds = container_of(work,
+			     struct cxl_dev_state, security.poll_dwork.work);
+
+	mutex_lock(&cxlds->mbox_mutex);
+	if (cxl_mbox_background_complete(cxlds)) {
+		cxlds->security.poll_tmo_secs = 0;
+		put_device(cxlds->dev);
+
+		dev_dbg(cxlds->dev, "Sanitization operation ended\n");
+	} else {
+		int timeout = cxlds->security.poll_tmo_secs + 10;
+
+		cxlds->security.poll_tmo_secs = min(15 * 60, timeout);
+		queue_delayed_work(system_wq, &cxlds->security.poll_dwork,
+				   timeout * HZ);
+	}
+	mutex_unlock(&cxlds->mbox_mutex);
+}
+
 /**
  * __cxl_pci_mbox_send_cmd() - Execute a mailbox command
  * @cxlds: The device state to communicate with.
@@ -187,6 +221,16 @@ static int __cxl_pci_mbox_send_cmd(struct cxl_dev_state *cxlds,
 		return -EBUSY;
 	}
 
+	/*
+	 * With sanitize polling, hardware might be done and the poller still
+	 * not be in sync. Ensure no new command comes in until so. Keep the
+	 * hardware semantics and only allow device health status.
+	 */
+	if (cxlds->security.poll_tmo_secs > 0) {
+		if (mbox_cmd->opcode != CXL_MBOX_OP_GET_HEALTH_INFO)
+			return -EBUSY;
+	}
+
 	cmd_reg = FIELD_PREP(CXLDEV_MBOX_CMD_COMMAND_OPCODE_MASK,
 			     mbox_cmd->opcode);
 	if (mbox_cmd->size_in) {
@@ -235,11 +279,34 @@ static int __cxl_pci_mbox_send_cmd(struct cxl_dev_state *cxlds,
 	 */
 	if (mbox_cmd->return_code == CXL_MBOX_CMD_RC_BACKGROUND) {
 		u64 bg_status_reg;
-		int i, timeout = mbox_cmd->poll_interval_ms;
+		int i, timeout;
+
+		/*
+		 * Sanitization is a special case which monopolizes the device
+		 * and cannot be timesliced. Handle asynchronously instead,
+		 * and allow userspace to poll(2) for completion.
+		 */
+		if (mbox_cmd->opcode == CXL_MBOX_OP_SANITIZE) {
+			if (cxlds->security.poll_tmo_secs != -1) {
+				/* hold the device throughout */
+				get_device(cxlds->dev);
+
+				/* give first timeout a second */
+				timeout = 1;
+				cxlds->security.poll_tmo_secs = timeout;
+				queue_delayed_work(system_wq,
+						   &cxlds->security.poll_dwork,
+						   timeout * HZ);
+			}
+
+			dev_dbg(dev, "Sanitization operation started\n");
+			goto success;
+		}
 
 		dev_dbg(dev, "Mailbox background operation (0x%04x) started\n",
 			mbox_cmd->opcode);
 
+		timeout = mbox_cmd->poll_interval_ms;
 		for (i = 0; i < mbox_cmd->poll_count; i++) {
 			if (rcuwait_wait_event_timeout(&cxlds->mbox_wait,
 				       cxl_mbox_background_complete(cxlds),
@@ -270,6 +337,7 @@ static int __cxl_pci_mbox_send_cmd(struct cxl_dev_state *cxlds,
 		return 0; /* completed but caller must check return_code */
 	}
 
+success:
 	/* #7 */
 	cmd_reg = readq(cxlds->regs.mbox + CXLDEV_MBOX_CMD_OFFSET);
 	out_len = FIELD_GET(CXLDEV_MBOX_CMD_PAYLOAD_LENGTH_MASK, cmd_reg);
@@ -382,6 +450,9 @@ static int cxl_pci_setup_mailbox(struct cxl_dev_state *cxlds)
 	}
 
 mbox_poll:
+	cxlds->security.poll = true;
+	INIT_DELAYED_WORK(&cxlds->security.poll_dwork, cxl_mbox_sanitize_work);
+
 	dev_dbg(cxlds->dev, "Mailbox interrupts are unsupported");
 	return 0;
 }