drm/i915/skl: Making DC6 entry is the last call in suspend flow.

Mmio register access after dc6/dc5 entry is not allowed when
DC6 power states are enabled according to bspec (bspec-id 0527),
so enabling dc6 as the last call in suspend flow.

Addtional note from Imre:

Currently we keep DC6 enabled during modesets and DPAUX transfers, which
is not allowed according to the specification. This can lead at least to
PLL locking failures, DPAUX timeouts and prevent deeper package power
states (PC9/10). Fix this for now by enabling DC6 only when we know the
above events (modeset, DPAUX) can't happen.

This a temporary solution as some issues are still unsolved as described
in [1] and [2], we'll address those as a follow-up.

[1]
http://lists.freedesktop.org/archives/intel-gfx/2015-October/077669.html
[2]
http://lists.freedesktop.org/archives/intel-gfx/2015-October/077787.html

v1: Initial version.

v2: Based on review comment from Daniel,
- created a seperate patch for csr uninitialization set call.

v3: Rebased on top of latest code.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 7 insertions, 12 deletions

diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 0cfe4c14866a..5892c0011421 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -550,7 +550,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
 		  "DC6 already programmed to be disabled.\n");
 }
 
-static void skl_enable_dc6(struct drm_i915_private *dev_priv)
+void skl_enable_dc6(struct drm_i915_private *dev_priv)
 {
 	uint32_t val;
 
@@ -567,7 +567,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
 	POSTING_READ(DC_STATE_EN);
 }
 
-static void skl_disable_dc6(struct drm_i915_private *dev_priv)
+void skl_disable_dc6(struct drm_i915_private *dev_priv)
 {
 	uint32_t val;
 
@@ -628,10 +628,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 				!I915_READ(HSW_PWR_WELL_BIOS),
 				"Invalid for power well status to be enabled, unless done by the BIOS, \
 				when request is to disable!\n");
-			if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
-				power_well->data == SKL_DISP_PW_2) {
+			if (power_well->data == SKL_DISP_PW_2) {
+				if (GEN9_ENABLE_DC5(dev))
+					gen9_disable_dc5(dev_priv);
 				if (SKL_ENABLE_DC6(dev)) {
-					skl_disable_dc6(dev_priv);
 					/*
 					 * DDI buffer programming unnecessary during driver-load/resume
 					 * as it's already done during modeset initialization then.
@@ -639,8 +639,6 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 					 */
 					if (!dev_priv->power_domains.initializing)
 						intel_prepare_ddi(dev);
-				} else {
-					gen9_disable_dc5(dev_priv);
 				}
 			}
 			I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
@@ -666,7 +664,7 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 				DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
 			}
 
-			if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
+			if (GEN9_ENABLE_DC5(dev) &&
 				power_well->data == SKL_DISP_PW_2) {
 				enum csr_state state;
 				/* TODO: wait for a completion event or
@@ -679,10 +677,7 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 					DRM_DEBUG("CSR firmware not ready (%d)\n",
 							state);
 				else
-					if (SKL_ENABLE_DC6(dev))
-						skl_enable_dc6(dev_priv);
-					else
-						gen9_enable_dc5(dev_priv);
+					gen9_enable_dc5(dev_priv);
 			}
 		}
 	}