summaryrefslogtreecommitdiff
path: root/drivers/misc
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-01-25 13:27:36 -0800
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-01-25 13:27:36 -0800
commit9f9cba810f36d16f4e64477e879a69f6c47b389d (patch)
treed787abcbead1439d3f82f0719efe520fd9689f79 /drivers/misc
parentdbf5bef8da169b38db804996a661f8d634df8295 (diff)
parent949db153b6466c6f7cad5a427ecea94985927311 (diff)
Merge 3.8-rc5 into tty-next
This resolves a number of tty driver merge issues found in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/misc')
-rw-r--r--drivers/misc/atmel-ssc.c8
-rw-r--r--drivers/misc/mei/amthif.c6
-rw-r--r--drivers/misc/ti-st/st_kim.c37
3 files changed, 47 insertions, 4 deletions
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 158da5a81a66..3c09cbb70b1d 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
/* Serialize access to ssc_list and user count */
static DEFINE_SPINLOCK(user_lock);
@@ -131,6 +132,13 @@ static int ssc_probe(struct platform_device *pdev)
struct resource *regs;
struct ssc_device *ssc;
const struct atmel_ssc_platform_data *plat_dat;
+ struct pinctrl *pinctrl;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ dev_err(&pdev->dev, "Failed to request pinctrl\n");
+ return PTR_ERR(pinctrl);
+ }
ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL);
if (!ssc) {
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index 18794aea6062..e40ffd9502d1 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -187,13 +187,13 @@ int mei_amthif_read(struct mei_device *dev, struct file *file,
wait_ret = wait_event_interruptible(dev->iamthif_cl.wait,
(cb = mei_amthif_find_read_list_entry(dev, file)));
+ /* Locking again the Mutex */
+ mutex_lock(&dev->device_lock);
+
if (wait_ret)
return -ERESTARTSYS;
dev_dbg(&dev->pdev->dev, "woke up from sleep\n");
-
- /* Locking again the Mutex */
- mutex_lock(&dev->device_lock);
}
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 9ff942a346ed..83269f1d16e3 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -468,6 +468,11 @@ long st_kim_start(void *kim_data)
if (pdata->chip_enable)
pdata->chip_enable(kim_gdata);
+ /* Configure BT nShutdown to HIGH state */
+ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
+ mdelay(5); /* FIXME: a proper toggle */
+ gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
+ mdelay(100);
/* re-initialize the completion */
INIT_COMPLETION(kim_gdata->ldisc_installed);
/* send notification to UIM */
@@ -509,7 +514,8 @@ long st_kim_start(void *kim_data)
* (b) upon failure to either install ldisc or download firmware.
* The function is responsible to (a) notify UIM about un-installation,
* (b) flush UART if the ldisc was installed.
- * (c) invoke platform's chip disabling routine.
+ * (c) reset BT_EN - pull down nshutdown at the end.
+ * (d) invoke platform's chip disabling routine.
*/
long st_kim_stop(void *kim_data)
{
@@ -541,6 +547,13 @@ long st_kim_stop(void *kim_data)
err = -ETIMEDOUT;
}
+ /* By default configure BT nShutdown to LOW state */
+ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
+ mdelay(1);
+ gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
+ mdelay(1);
+ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
+
/* platform specific disable */
if (pdata->chip_disable)
pdata->chip_disable(kim_gdata);
@@ -733,6 +746,20 @@ static int kim_probe(struct platform_device *pdev)
/* refer to itself */
kim_gdata->core_data->kim_data = kim_gdata;
+ /* Claim the chip enable nShutdown gpio from the system */
+ kim_gdata->nshutdown = pdata->nshutdown_gpio;
+ err = gpio_request(kim_gdata->nshutdown, "kim");
+ if (unlikely(err)) {
+ pr_err(" gpio %ld request failed ", kim_gdata->nshutdown);
+ return err;
+ }
+
+ /* Configure nShutdown GPIO as output=0 */
+ err = gpio_direction_output(kim_gdata->nshutdown, 0);
+ if (unlikely(err)) {
+ pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown);
+ return err;
+ }
/* get reference of pdev for request_firmware
*/
kim_gdata->kim_pdev = pdev;
@@ -779,10 +806,18 @@ err_core_init:
static int kim_remove(struct platform_device *pdev)
{
+ /* free the GPIOs requested */
+ struct ti_st_plat_data *pdata = pdev->dev.platform_data;
struct kim_data_s *kim_gdata;
kim_gdata = dev_get_drvdata(&pdev->dev);
+ /* Free the Bluetooth/FM/GPIO
+ * nShutdown gpio from the system
+ */
+ gpio_free(pdata->nshutdown_gpio);
+ pr_info("nshutdown GPIO Freed");
+
debugfs_remove_recursive(kim_debugfs_dir);
sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
pr_info("sysfs entries removed");